From owner-FreeBSD-users-jp@jp.freebsd.org  Wed Aug 27 22:34:43 1997
Received: by jaz.jp.freebsd.org (8.8.7+2.7Wbeta7/8.7.3) id WAA11596
	Wed, 27 Aug 1997 22:34:43 +0900 (JST)
Received: by jaz.jp.freebsd.org (8.8.7+2.7Wbeta7/8.7.3) with ESMTP id WAA11561
	for <FreeBSD-users-jp@jp.freebsd.org>; Wed, 27 Aug 1997 22:34:14 +0900 (JST)
Received: from localhost (localhost.demon.co.uk [127.0.0.1]) by totomes.demon.co.uk (8.8.5/8.6.12) with ESMTP id NAA12781; Wed, 27 Aug 1997 13:33:44 GMT
Message-Id: <199708271333.NAA12781@totomes.demon.co.uk>
To: FreeBSD-users-jp@jp.freebsd.org
Cc: kyama@totomes.demon.co.uk
X-Mailer: Mew version 1.66 on Emacs 19.28.2 / Mule 2.3
From: YAMAMOTO Kunitoshi <kyama@totomes.demon.co.uk>
Mime-Version: 1.0
Content-Type: Text/Plain; charset=iso-2022-jp
Content-Transfer-Encoding: 7bit
Date: Wed, 27 Aug 1997 14:33:40 +0100
Reply-To: FreeBSD-users-jp@jp.freebsd.org
Precedence: bulk
X-Distribute: distribute [version 2.1 (Alpha) patchlevel=20]
X-Sequence: FreeBSD-users-jp 17320
Subject: [FreeBSD-users-jp 17320] How to setup bpp=16 on XF86 3.3.1 for TP560
Errors-To: owner-FreeBSD-users-jp@jp.freebsd.org
Sender: owner-FreeBSD-users-jp@jp.freebsd.org


$B;3K\!w%^%s%A%'%9%?!<$G$9!#$O$8$a$^$7$F!#(B

$B:G6a(B ThinkPad 560$B$r9XF~$7$F!"(BFreeBSD$B$N4D6-$r9=C[Cf$G$9!#(B
XF86 3.3.1$B$r;H$C$F!"(Bbpp=8$B$N>l9g$N%;%C%H%"%C%W$O=PMh$?$N(B
$B$G$9$,!"(Bbpp=16$B$N@_Dj$,=PMh$:$K:$$C$F$$$^$9!#(B
$B0J2<$K(B XF86 3.3.1$B$rN)$A>e$2$?;~$N%m%0$H(BXF86Config$B$rE:IU(B
$B$7$^$9$N$G!"(B800x600 bpp=16$B$N%;%C%H%"%C%WJ}K!$d%R%s%H$,(B
$B$"$j$^$7$?$i!"65$($F2<$5$$!#(B

$B;d$O!"%m%0$N:G8e$K$"$k(BRequired Resolution 1024x600$B$,%(%i!<(B
$B$@$H;W$&$N$G$9$,!"(BRequired Resolution $B$r(B 800x600$B$K$9$k(B
$BJ}K!$,J,$+$j$^$;$s!#(B

$B$h$m$7$/$*4j$$$7$^$9!#(B
-startx.log------------------------------------------------
XFree86 Version 3.3.1 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: August 4 1997
	If the server is older than 6-12 months, or if your card is newer
	than the above date, look for a newer version before reporting
	problems.  (see http://www.XFree86.Org/FAQ)
Operating System: FreeBSD 2.2-STABLE i386 
Configured drivers:
  SVGA: server for SVGA graphics adaptors (Patchlevel 0):
      NV1, STG2000, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b,
      ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b,
      ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, et3000, pvga1, wd90c00,
      wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, ati, sis86c201,
      sis86c202, sis86c205, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c,
      tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr,
      tgui9320lcd, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi,
      tgui9440agi, tgui96xx, cyber938x, clgd5420, clgd5422, clgd5424,
      clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446,
      clgd5480, clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225,
      clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, ncr77c22,
      ncr77c22e, cpq_avga, mga2064w, mga1064sg, mga2164w, oti067, oti077,
      oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401,
      cl6410, cl6412, cl6420, cl6440, video7, ct65520, ct65525, ct65530,
      ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554,
      ct65555, ct68554, ct64200, ct64300, ark1000vl, ark1000pv, ark2000pv,
      ark2000mt, mx, realtek, AP6422, AT24, s3_virge, generic
Using syscons driver with X support (version 2.0)
(using VT number 4)

XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: rules: "xfree86"
(**) XKB: model: "jp106"
(**) XKB: layout: "jp"
(**) Mouse: type: PS/2, device: /dev/psm0, baudrate: 1200,
       3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "Trident"
(**) SVGA: Monitor ID: "IMB TP560"
(--) SVGA: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/cyrillic"
(--) SVGA: PCI: Trident TGUI 9660/9680/9682 rev 211, Memory @ 0x08000000, 0x08400000
(--) Trident chipset version: 0xd3 (TGUI96xx)
(--) SVGA: BIOS reports Clock Control Bits 0x0
(--) SVGA: Detected a Trident 9385.
(--) SVGA: Detected an TFT  800x600 Display
(--) SVGA: Revision 51.
(**) SVGA: Using Trident programmable clocks
(--) SVGA: chipset:  tgui96xx
(**) SVGA: videoram: 1024k
(**) SVGA: Option "lcd_center"
(**) SVGA: Option "lcd_centre"
(**) SVGA: Option "linear"
(**) SVGA: Using 16 bpp, Depth 16, Color weight: 565
(--) SVGA: Maximum allowed dot-clock: 135.000 MHz
(**) SVGA: Mode "800x600": mode clock =  40.000
(**) SVGA: Mode "640x480": mode clock =  31.500

Fatal server error:
(--) SVGA: Too Little VideoRam for Accelerator Engine
(--) SVGA: Required resolution with accelerator is 1024x600.
(--) SVGA: Reduce your Virtual X resolution to 512, or use Option "noaccel".


When reporting a problem related to a server crash, please send
the full server output, not just the last messages

X connection to :0.0 broken (explicit kill or server shutdown).

-XF86Config------------------------------------------------------
#----------------------------------------------------------------
Section "Files"

    RgbPath	"/usr/X11R6/lib/X11/rgb"

    FontPath   "/usr/X11R6/lib/X11/fonts/cyrillic"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"

EndSection

Section "ServerFlags"

EndSection

Section "Keyboard"

    Protocol	"Standard"

    AutoRepeat	500 5

    XkbRules    "xfree86"
    XkbModel    "jp106"
    XkbLayout   "jp"

EndSection


Section "Pointer"
    Protocol    "PS/2"
    Device      "/dev/psm0"

    Emulate3Buttons
    Emulate3Timeout    50

EndSection

Section "Monitor"

    Identifier  "IMB TP560"
    VendorName  "IBM"
    ModelName   "TP560"

    HorizSync   30.21, 31.5 - 37.9

    VertRefresh 48.34,49.51 ,50 - 100

Modeline "640x400"     25.175 640  664  760  800   400  409  411  450
Modeline "640x480"     25.175 640  664  760  800   480  491  493  525
ModeLine "800x600"     36     800  824  896 1024   600  601  603  625

Modeline "640x480"     31.5   640  680  720  864   480  488  491  521
Modeline "800x600"     40     800  840  968 1056   600  601  605  628 +hsync +vsync

Modeline "800x600"     50     800  856  976 1040   600  637  643  666 +hsync +vsync

EndSection

Section "Device"
    Identifier  "Trident"
    VendorName  "TGUI"
    BoardName   "cyber9385"
    VideoRam    1024
    Option      "linear"
    Option      "lcd_center"
    ClockChip   "tgui"
EndSection


# The Colour SVGA server

Section "Screen"
    Driver      "svga"
    Device      "Trident"
    Monitor     "IMB TP560"
    Subsection "Display"
        Depth       8
        Modes       "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes       "640x400"
        ViewPort    0 0
    EndSubsection
EndSection

------
$B;3K\!w%^%s%A%'%9%?!<(B

