-- =============================================================================
-- Copyright (c) 2004-2018 New H3C Tech. Co., Ltd. All rights reserved.
--
-- Description:
--   The file defines a MIB to provide MESH configuration information.
-- Reference:
-- Version: V1.6
-- History:
--   V1.0 2008-07-08 Initial version, created by ChangHuifeng
--   V1.1 2008-11-07 modified by liyugang
--        Add hh3cDot11sMeshLinkStatisTable, hh3cDot11sMeshNbrStatusTable
--        to hh3cDot11sMeshStatusGroup
--   V1.2 2009-08-01 modified by Wang Shaojie
--        Add hh3cDot11sMeshLinkIFName to hh3cDot11sMeshLinkStatisTable.
--   V1.3 2013-09-14 modified by Zhang Siyu
--        Add hh3cDot11sMeshLinkType to hh3cDot11sMeshLinkStatusTable
--   V1.4 2015-02-02 modified by Xiao min
--        Add hh3cDot11sMeshLinkSNR to hh3cDot11sMeshLinkStatusTable
--        Add hh3cDot11sMeshLinkNoise to hh3cDot11sMeshLinkStatusTable
--        Add hh3cDot11sMeshLinkPeerSNR to hh3cDot11sMeshLinkStatusTable
--        Add hh3cDot11sMeshLinkPeerNoise to hh3cDot11sMeshLinkStatusTable
--   V1.5 2015-05-6 modified by guoxuzhen
--        Add hh3cDot11sMeshAKMMode, hh3cDot11sSimplerKey to Hh3cDot11sMeshPflTable
--        Add hh3cDot11sBindInterface to hh3cDot11sRadioCfgTable
--        2015-08-14 modified by Xiao min
--        Add hh3cDot11sMeshLinkPeerIPAddress to hh3cDot11sMeshLinkStatusTable
--        Add hh3cDot11sMeshLinkPeerSystemName to hh3cDot11sMeshLinkStatusTable
--   V1.6 2018-05-15 modified by liuxiaolong
--        Add hh3cDot11sMlspExtCfgTable to hh3cDot11sConfigGroup
--        Add hh3cDot11sMeshLinkNotifyGroup to hh3cDot11sMesh
--        Add hh3cDot11sMlspMode to hh3cDot11sMpPlcyTable
--        Add hh3cDot11sWaveGuideHoldRSSI to hh3cDot11sMpPlcyTable
--        Add hh3cDot11sWaveGuideSwitch to hh3cDot11sMpPlcyTable
--        Add hh3cDot11sOptimizeEnable to hh3cDot11sMpPlcyTable
--        Add hh3cDot11sOptimizeThreshold to hh3cDot11sMpPlcyTable
--        Add hh3cDot11sMlspLogEnable to hh3cDot11sMpPlcyTable
--        Add hh3cDot11sMlspLogInterval to hh3cDot11sMpPlcyTable
--        Add hh3cDot11sActiveKeepaliveCount to hh3cDot11sMpPlcyTable
--        Add hh3cDot11sLinkEstaThreshold to hh3cDot11sMpPlcyTable
--        Add hh3cDot11sTransmissionMethod to hh3cDot11sMpPlcyTable
--        Add hh3cDot11sTransmitLevel to hh3cDot11sMpPlcyTable
--        Add hh3cDot11sTempLinkEnable to hh3cDot11sMpPlcyTable
-- =============================================================================
HH3C-DOT11S-MESH-MIB DEFINITIONS ::= BEGIN

IMPORTS
        TruthValue,
        MacAddress,
        RowStatus
    FROM SNMPv2-TC
        MODULE-IDENTITY,
        OBJECT-TYPE,
        Integer32,
        Unsigned32,
        Counter32,
        IpAddress,
        NOTIFICATION-TYPE
    FROM SNMPv2-SMI
        hh3cDot11, Hh3cDot11RadioElementIndex, hh3cDot11APElementIndex, Hh3cDot11AKMType
    FROM HH3C-DOT11-REF-MIB;

hh3cDot11sMesh MODULE-IDENTITY
    LAST-UPDATED "201805151000Z"        -- May 15, 2018 at 10:00 GMT
    ORGANIZATION
        "New H3C Technologies Co., Ltd."
    CONTACT-INFO
        "Platform Team New H3C Technologies Co., Ltd.
         Hai-Dian District Beijing P.R. China
         Http://www.h3c.com
         Zip:100085"
    DESCRIPTION
        "The file defines a MIB to provide MESH configuration information.

        GLOSSARY

        IEEE 802.11
        Standard to encourage interoperability among
        wireless networking equipment.

        Access point (AP)
        Transmitter/receiver (transceiver) device
        that commonly connects and transports data
        between a wireless network and a wired network.

        Access control (AC)
        To control and manage multi-APs, it will bridge
        wireless and wired network.

        Fat AP
        Applied in the home, SOHO and so on, and it could
        work independently without help from AC.

        Fit AP
        Applied in the enterprise environment, it will work
        under the control and management from AC.

        BSS
        IEEE 802.11 Basic Service Set (Radio Cell).  The
        BSS of an AP comprises of the stations directly
        associating with the AP.

        Radio
        The chip set to receive and send wireless signal.

        Mesh
        A network consisting of two or more mesh points
        which communicate with each other via mesh services.

        Mesh Point (MP)
        An IEEE 802.11 entity that contains an IEEE 802.11-conformant
        medium access control (MAC) and physical layer (PHY) interface
        to the wireless medium (WM) that supports mesh services.

        Mesh Access Point (MAP)
        A mesh point that is collocated with one or more access points.

        Mesh Portal Point (MPP)
        A mesh point that is collocated with one or more portals.

        Mesh Link
        A link between two MPs.

        Simultaneous Authentication of Equals (SAE)
        A password-authenticated key exchange based on
        a zero-knowledge proof."
    REVISION "201805151000Z"        -- May 15, 2018 at 10:00 GMT
    DESCRIPTION
        "Add new nodes and new table"
    REVISION "201508141000Z"        -- Aug 01, 2009 at 10:00 GMT
    DESCRIPTION
        "Add hh3cDot11sMeshLinkPeerIPAddress to hh3cDot11sMeshLinkStatusTable,
         Add hh3cDot11sMeshLinkPeerSystemName to hh3cDot11sMeshLinkStatusTable"
    REVISION "201505061500Z"        -- May 6, 2015 at 15:00 GMT
    DESCRIPTION
        "Add new nodes."
    REVISION "200908011000Z"        -- Aug 01, 2009 at 10:00 GMT
    DESCRIPTION
        "Add new nodes."
    REVISION "200811071000Z"        -- Nov 07, 2008 at 10:00 GMT
    DESCRIPTION
        "Modified to add new nodes and a new table."
    REVISION "200807081800Z"        -- July 8, 2008 at 18:00 GMT
    DESCRIPTION
        "The initial revision of this MIB module."
    ::= { hh3cDot11 11 }

-- *****************************************************************************
-- *  Major sections
-- *****************************************************************************

hh3cDot11sConfigGroup OBJECT IDENTIFIER  ::= { hh3cDot11sMesh 1 }
--  Dot11s Configuration Group has the following children:
--  hh3cDot11sMeshGlobalPara             ::= { hh3cDot11sConfigGroup 1 }
--  hh3cDot11sMeshPflTable               ::= { hh3cDot11sConfigGroup 2 }
--  hh3cDot11sMpPlcyTable                ::= { hh3cDot11sConfigGroup 3 }
--  hh3cDot11sMlspCfgTable               ::= { hh3cDot11sConfigGroup 4 }
--  hh3cDot11sRadioCfgTable              ::= { hh3cDot11sConfigGroup 5 }
--  hh3cDot11sAPCfgTable                 ::= { hh3cDot11sConfigGroup 6 }
--  hh3cDot11sMlspExtCfgTable            ::= { hh3cDot11sConfigGroup 7 }

hh3cDot11sWDSConfigGroup OBJECT IDENTIFIER ::= { hh3cDot11sMesh 2 }
--  Dot11s WDS Configuration Group has the following children:
--  hh3cDot11sWDSPeerMacTable         ::= { hh3cDot11sWDSConfigGroup 1 }

hh3cDot11sMeshStatusGroup OBJECT IDENTIFIER ::= { hh3cDot11sMesh 3 }
--  Dot11s Mesh Status Group has the following children:
--  hh3cDot11sMeshLinkStatusTable    ::= { hh3cDot11sMeshStatusGroup 1 }
--  hh3cDot11sMeshLinkStatisTable    ::= { hh3cDot11sMeshStatusGroup 2 }
--  hh3cDot11sMeshNbrStatusTable     ::= { hh3cDot11sMeshStatusGroup 3 }

hh3cDot11sMeshLinkNotifyGroup OBJECT IDENTIFIER ::= { hh3cDot11sMesh 4 }
-- *****************************************************************************
-- *  hh3cDot11sMeshGlobalPara Definition
-- *****************************************************************************
hh3cDot11sMeshGlobalPara OBJECT IDENTIFIER  ::= { hh3cDot11sConfigGroup 1 }

hh3cDot11sMeshMkdID OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the mesh key distributor identifier (MKD-ID).
        If the MKD-ID is not configured, the value is '00:00:00:00:00:00'."
    ::= { hh3cDot11sMeshGlobalPara 1 }

-- *****************************************************************************
-- * End of hh3cDot11sMeshGlobalPara Definition
-- *****************************************************************************
-- *****************************************************************************
-- *  hh3cDot11sMeshPflTable Definition
-- *****************************************************************************
hh3cDot11sMeshPflTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Hh3cDot11sMeshPflEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to configure mesh profile.
        A mesh profile is created and mapped to a MP so that
        it can provide mesh services to other MPs which have the same
        mesh ID.
        When the mesh profile is enabled, all of the object in this table
        cannot be modified except hh3cDot11sMeshPflEnable.
        The mesh profile cannot be deleted when it is bound with the radio."
    ::= { hh3cDot11sConfigGroup 2 }

hh3cDot11sMeshPflEntry OBJECT-TYPE
    SYNTAX      Hh3cDot11sMeshPflEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry contains information of a mesh profile."
    INDEX
        {
            hh3cDot11sMeshPflIndex
        }
    ::= { hh3cDot11sMeshPflTable 1 }

Hh3cDot11sMeshPflEntry ::= SEQUENCE
    {
        hh3cDot11sMeshPflIndex         Integer32,
        hh3cDot11sMeshPflMeshID        OCTET STRING,
        hh3cDot11sMeshPflBindIntNum    Integer32,
        hh3cDot11sMeshPflKeepAlive     Integer32,
        hh3cDot11sMeshPflBackhaulRate  Integer32,
        hh3cDot11sMeshMkdServEnable    TruthValue,
        hh3cDot11sMeshPflEnable        TruthValue,
        hh3cDot11sMeshPflRowStatus     RowStatus,
        hh3cDot11sMeshAKMMode          Hh3cDot11AKMType,
        hh3cDot11sMeshSimpleKey        OCTET STRING
    }

hh3cDot11sMeshPflIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object represents the index of the mesh profile."
    ::= { hh3cDot11sMeshPflEntry 1 }

hh3cDot11sMeshPflMeshID OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..32))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the mesh ID of the mesh profile.
        The string length of this object is zero when the mesh ID is not
        configured.  If the mesh ID is not configured, hh3cDot11sMeshPflEnable
        cannot be set to 'true'."
    ::= { hh3cDot11sMeshPflEntry 2 }

hh3cDot11sMeshPflBindIntNum OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the specified mesh interface number
        bound to the mesh profile.
        If the value is set to -1, the binding will be removed."
    DEFVAL      { -1 }
    ::= { hh3cDot11sMeshPflEntry 3 }

hh3cDot11sMeshPflKeepAlive OBJECT-TYPE
    SYNTAX      Integer32(1..1800)
    UNITS       "second"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the mesh link keep-alive interval."
    ::= { hh3cDot11sMeshPflEntry 4 }

hh3cDot11sMeshPflBackhaulRate OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "Kbps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the link backhaul rate."
    ::= { hh3cDot11sMeshPflEntry 5 }

hh3cDot11sMeshMkdServEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object indicates whether the mesh key distributor (MKD)
        service for the mesh profile is enabled.
        'true': The MKD service for the mesh profile is enabled.
        'false': The MKD service for the mesh profile is disabled."
    DEFVAL      { false }
    ::= { hh3cDot11sMeshPflEntry 6 }

hh3cDot11sMeshPflEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object indicates whether the mesh profile is enabled.
        'true': The mesh profile is enabled.
        'false': The mesh profile is disabled."
    DEFVAL      { false }
    ::= { hh3cDot11sMeshPflEntry 7 }

hh3cDot11sMeshPflRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The status of this table entry."
    ::= { hh3cDot11sMeshPflEntry 8 }

hh3cDot11sMeshAKMMode OBJECT-TYPE
    SYNTAX      Hh3cDot11AKMType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Represents the authentication and key management mode defined by 802.11s.
        The following values are supported:
        'none': No key management mode configured.
        'psk': pre-shared key authentication."
    DEFVAL      { none }
    ::= { hh3cDot11sMeshPflEntry 9 }

hh3cDot11sMeshSimpleKey OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Represents the simple key for SAE."
    ::= { hh3cDot11sMeshPflEntry 10 }

-- *****************************************************************************
-- * End of hh3cDot11sMeshPflTable Definition
-- *****************************************************************************
-- *****************************************************************************
-- *  hh3cDot11sMpPlcyTable Definition
-- *****************************************************************************
hh3cDot11sMpPlcyTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Hh3cDot11sMpPlcyEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to configure MP policy.
        There is a default policy on system and its index is 1.
        The default policy cannot be deleted or modified.
        The MP policy cannot be deleted when it is applied to a radio."
    ::= { hh3cDot11sConfigGroup 3 }

hh3cDot11sMpPlcyEntry OBJECT-TYPE
    SYNTAX      Hh3cDot11sMpPlcyEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry contains information of a MP policy."
    INDEX
        {
            hh3cDot11sMpPlcyIndex
        }
    ::= { hh3cDot11sMpPlcyTable 1 }

Hh3cDot11sMpPlcyEntry ::= SEQUENCE
    {
        hh3cDot11sMpPlcyIndex          Integer32,
        hh3cDot11sMpPlcyName           OCTET STRING,
        hh3cDot11sMpPlcyInitEnable     TruthValue,
        hh3cDot11sMlspEnable           TruthValue,
        hh3cDot11sProbReqInterval      Integer32,
        hh3cDot11sRoleAuthEnable       TruthValue,
        hh3cDot11sLinkHoldRSSI         Integer32,
        hh3cDot11sLinkHoldTime         Integer32,
        hh3cDot11sSwitchMargin         Integer32,
        hh3cDot11sLinkSaturationRSSI   Integer32,
        hh3cDot11sLinkRateMode         INTEGER,
        hh3cDot11sMaxLinkNum           Integer32,
        hh3cDot11sMpPlcyRowStatus      RowStatus,
        hh3cDot11sMlspMode             INTEGER,
        hh3cDot11sWaveGuideHoldRSSI    Integer32,
        hh3cDot11sWaveGuideSwitch      TruthValue,
        hh3cDot11sOptimizeEnable       TruthValue,
        hh3cDot11sOptimizeThreshold    Integer32,
        hh3cDot11sMlspLogEnable        TruthValue,
        hh3cDot11sMlspLogInterval      Integer32,
        hh3cDot11sActiveKeepaliveCount Integer32,
        hh3cDot11sLinkEstaThreshold    Integer32,
        hh3cDot11sTransmissionMethod   INTEGER,
        hh3cDot11sTransmitLevel        Integer32,
        hh3cDot11sTempLinkEnable       TruthValue
    }

hh3cDot11sMpPlcyIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object represents the MP policy index."
    ::= { hh3cDot11sMpPlcyEntry 1 }

hh3cDot11sMpPlcyName OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (1..31))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the MP policy name.
        MP policy cannot be created with the name of the
        default policy.
        Modification is not supported."
    ::= { hh3cDot11sMpPlcyEntry 2 }

hh3cDot11sMpPlcyInitEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object indicates whether the link initiation for
        the MP policy is enabled.
        'true': The link initiation for the MP policy is enabled.
        'false': The link initiation for the MP policy is disabled."
    DEFVAL      { true }
    ::= { hh3cDot11sMpPlcyEntry 3 }

hh3cDot11sMlspEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object indicates whether the mesh link switch protocol (MLSP)
        is enabled.
        'true': MLSP is enabled.
        'false': MLSP is disabled."
    DEFVAL      { false }
    ::= { hh3cDot11sMpPlcyEntry 4 }

hh3cDot11sProbReqInterval OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "millisecond"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the probe request interval."
    ::= { hh3cDot11sMpPlcyEntry 5 }

hh3cDot11sRoleAuthEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object indicates whether the device can play as the role
        of an authenticator."
    DEFVAL      { true }
    ::= { hh3cDot11sMpPlcyEntry 6 }

hh3cDot11sLinkHoldRSSI OBJECT-TYPE
    SYNTAX      Integer32(5..100)
    UNITS       "dBm"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the link-hold
        receive signal strength indicator (RSSI)."
    ::= { hh3cDot11sMpPlcyEntry 7 }

hh3cDot11sLinkHoldTime OBJECT-TYPE
    SYNTAX      Integer32(1000..20000)
    UNITS       "millisecond"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the link-hold time."
    ::= { hh3cDot11sMpPlcyEntry 8 }

hh3cDot11sSwitchMargin OBJECT-TYPE
    SYNTAX      Integer32(1..100)
    UNITS       "dBm"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the link-switch margin."
    ::= { hh3cDot11sMpPlcyEntry 9 }

hh3cDot11sLinkSaturationRSSI OBJECT-TYPE
    SYNTAX      Integer32(30..150)
    UNITS       "dBm"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the link saturation
        receive signal strength indicator (RSSI)."
    ::= { hh3cDot11sMpPlcyEntry 10 }

hh3cDot11sLinkRateMode OBJECT-TYPE
    SYNTAX      INTEGER
        {
            fixed(1),
            realtime(2)
        }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the rate mode of the mesh link."
    DEFVAL      { fixed }
    ::= { hh3cDot11sMpPlcyEntry 11 }

hh3cDot11sMaxLinkNum OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the maximum number of the mesh link."
    ::= { hh3cDot11sMpPlcyEntry 12 }

hh3cDot11sMpPlcyRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The status of this table entry."
    ::= { hh3cDot11sMpPlcyEntry 13 }

hh3cDot11sMlspMode OBJECT-TYPE
    SYNTAX      INTEGER
        {
            normal(0),
            satble(1)
        }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the MLSP mode."
    DEFVAL      { normal }
    ::= { hh3cDot11sMpPlcyEntry 14 }

hh3cDot11sWaveGuideHoldRSSI OBJECT-TYPE
    SYNTAX      Integer32(5..100)
    UNITS       "dBm"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the link-hold
        receive signal strength indicator (RSSI) of wave guides."
    DEFVAL      { 15 }
    ::= { hh3cDot11sMpPlcyEntry 15 }

hh3cDot11sWaveGuideSwitch OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the wave-guide switch state."
    DEFVAL      { false }
    ::= { hh3cDot11sMpPlcyEntry 16 }

hh3cDot11sOptimizeEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object indicates whether the mesh link switch protocol (MLSP)
        optimization function is enabled."
    DEFVAL      { false }
    ::= { hh3cDot11sMpPlcyEntry 17 }

hh3cDot11sOptimizeThreshold OBJECT-TYPE
    SYNTAX      Integer32(15..80)
    UNITS       "dBm"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the mesh link switch protocol (MLSP)
        optimization threshold."
    DEFVAL      { 30 }
    ::= { hh3cDot11sMpPlcyEntry 18 }

hh3cDot11sMlspLogEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object indicates whether the mesh link switch protocol (MLSP)
        link switch logging function is enabled."
    DEFVAL      { false }
    ::= { hh3cDot11sMpPlcyEntry 19 }

hh3cDot11sMlspLogInterval OBJECT-TYPE
    SYNTAX      Integer32(500..4000)
    UNITS       "millisecond"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the mesh link switch protocol (MLSP)
        link switch logging interval."
    DEFVAL      { 1000 }
    ::= { hh3cDot11sMpPlcyEntry 20 }

hh3cDot11sActiveKeepaliveCount OBJECT-TYPE
    SYNTAX      Integer32(1..100)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the mesh link switch protocol (MLSP)
        active link keepalive packet limit."
    DEFVAL      { 6 }
    ::= { hh3cDot11sMpPlcyEntry 21 }

hh3cDot11sLinkEstaThreshold OBJECT-TYPE
    SYNTAX      Integer32(1..100)
    UNITS       "dBm"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the mesh link establishment threshold."
    DEFVAL      { 5 }
    ::= { hh3cDot11sMpPlcyEntry 22 }

hh3cDot11sTransmissionMethod OBJECT-TYPE
    SYNTAX      INTEGER
        {
            air(0),
            waveGuide(1)
        }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the method for mesh link signal transmission."
    DEFVAL      { air }
    ::= { hh3cDot11sMpPlcyEntry 23 }

hh3cDot11sTransmitLevel OBJECT-TYPE
    SYNTAX      Integer32(0..4)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the active mesh link keepalive packet transmission level."
    DEFVAL      { 0 }
    ::= { hh3cDot11sMpPlcyEntry 24 }

hh3cDot11sTempLinkEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object indicates whether to allow temporary mesh link establishment."
    DEFVAL      { true }
    ::= { hh3cDot11sMpPlcyEntry 25 }

-- *****************************************************************************
-- * End of hh3cDot11sMpPlcyTable Definition
-- *****************************************************************************
-- *****************************************************************************
-- *  hh3cDot11sMlspCfgTable Definition
-- *****************************************************************************
hh3cDot11sMlspCfgTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Hh3cDot11sMlspCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to configure MLSP proxy MAC address.
        Only if the specified MP policy is modifiable and the MLSP
        is enabled, the row of this table can be created and deleted.
        The row of this table cannot be modified."
    ::= { hh3cDot11sConfigGroup 4 }

hh3cDot11sMlspCfgEntry OBJECT-TYPE
    SYNTAX      Hh3cDot11sMlspCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry contains information of MLSP proxy MAC address."
    INDEX
        {
            hh3cDot11sMpPlcyIndex,
            hh3cDot11sMlspProxyIndex
        }
    ::= { hh3cDot11sMlspCfgTable 1 }

Hh3cDot11sMlspCfgEntry ::= SEQUENCE
    {
        hh3cDot11sMlspProxyIndex       Integer32,
        hh3cDot11sMlspProxyMac         MacAddress,
        hh3cDot11sMlspRowStatus        RowStatus
    }

hh3cDot11sMlspProxyIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object represents the MLSP proxy MAC address index."
    ::= { hh3cDot11sMlspCfgEntry 1 }

hh3cDot11sMlspProxyMac OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the MLSP proxy MAC address."
    ::= { hh3cDot11sMlspCfgEntry 2 }

hh3cDot11sMlspRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The status of this table entry."
    ::= { hh3cDot11sMlspCfgEntry 3 }

-- *****************************************************************************
-- * End of hh3cDot11sMlspCfgTable Definition
-- *****************************************************************************
-- *****************************************************************************
-- *  hh3cDot11sRadioCfgTable Definition
-- *****************************************************************************
hh3cDot11sRadioCfgTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Hh3cDot11sRadioCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to configure mesh to the specified radio."
    ::= { hh3cDot11sConfigGroup 5 }

hh3cDot11sRadioCfgEntry OBJECT-TYPE
    SYNTAX      Hh3cDot11sRadioCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry contains mesh configure information
        of the specified radio."
    INDEX
        {
            hh3cDot11sCfgRadioIndex
        }
    ::= { hh3cDot11sRadioCfgTable 1 }

Hh3cDot11sRadioCfgEntry ::= SEQUENCE
    {
        hh3cDot11sCfgRadioIndex        Hh3cDot11RadioElementIndex,
        hh3cDot11sMeshPflMap           Integer32,
        hh3cDot11sMpPlcyMap            Integer32,
        hh3cDot11sBindInterface        Integer32
    }

hh3cDot11sCfgRadioIndex OBJECT-TYPE
    SYNTAX      Hh3cDot11RadioElementIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Represents index of the radio."
    ::= { hh3cDot11sRadioCfgEntry 1 }

hh3cDot11sMeshPflMap OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the number of the mesh profile mapped to
        the specified radio.  The value is zero when the radio is not
        bound to a mesh profile."
    DEFVAL      { 0 }
    ::= { hh3cDot11sRadioCfgEntry 2 }

hh3cDot11sMpPlcyMap OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the index of the MP policy mapped to the
        specified radio.  The MP policy is the default policy when the radio
        is not bound to the user-defined MP policy.
        The index of the default policy is 1.
        This object cannot be modified when the radio is enabled."
    DEFVAL      { 1 }
    ::= { hh3cDot11sRadioCfgEntry 3 }

hh3cDot11sBindInterface OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the number of the WLAN-Mesh interface
        mapped to the specified radio.  The value is -1 when the
        radio is not bound to a WLAN-Mesh interface."
    DEFVAL      { -1 }
    ::= { hh3cDot11sRadioCfgEntry 4 }

-- *****************************************************************************
-- * End of hh3cDot11sRadioCfgTable Definition
-- *****************************************************************************
-- *****************************************************************************
-- *  hh3cDot11sAPCfgTable Definition
-- *****************************************************************************
hh3cDot11sAPCfgTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Hh3cDot11sAPCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to configure mesh to the specified AP."
    ::= { hh3cDot11sConfigGroup 6 }

hh3cDot11sAPCfgEntry OBJECT-TYPE
    SYNTAX      Hh3cDot11sAPCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry contains mesh configure information
        of the specified AP."
    INDEX
        {
            hh3cDot11APElementIndex
        }
    ::= { hh3cDot11sAPCfgTable 1 }

Hh3cDot11sAPCfgEntry ::= SEQUENCE
    {
        hh3cDot11sPortalEnable         TruthValue
    }

hh3cDot11sPortalEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object indicates whether the portal service is enabled.
        'true': The portal service is enabled.
        'false': The portal service is disabled."
    DEFVAL      { false }
    ::= { hh3cDot11sAPCfgEntry 1 }

-- *****************************************************************************
-- * End of hh3cDot11sAPCfgTable Definition
-- *****************************************************************************
-- *****************************************************************************
-- *  hh3cDot11sWDSPeerMacTable Definition
-- *****************************************************************************
hh3cDot11sWDSPeerMacTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Hh3cDot11sWDSPeerMacEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to configure wireless distribution system (WDS).
        The row of this table cannot be modified."
    ::= { hh3cDot11sWDSConfigGroup 1 }

hh3cDot11sWDSPeerMacEntry OBJECT-TYPE
    SYNTAX      Hh3cDot11sWDSPeerMacEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry contains information of WDS."
    INDEX
        {
            hh3cDot11sCfgRadioIndex,
            hh3cDot11sWDSPeerMacIndex
        }
    ::= { hh3cDot11sWDSPeerMacTable 1 }

Hh3cDot11sWDSPeerMacEntry ::= SEQUENCE
    {
        hh3cDot11sWDSPeerMacIndex      Integer32,
        hh3cDot11sWDSPeerMacAddrss     MacAddress,
        hh3cDot11sWDSPeerMacRowStatus  RowStatus
    }

hh3cDot11sWDSPeerMacIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object represents the peer MAC address index."
    ::= { hh3cDot11sWDSPeerMacEntry 1 }

hh3cDot11sWDSPeerMacAddrss OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the peer MAC address."
    ::= { hh3cDot11sWDSPeerMacEntry 2 }

hh3cDot11sWDSPeerMacRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The status of this table entry."
    ::= { hh3cDot11sWDSPeerMacEntry 3 }

-- *****************************************************************************
-- * End of hh3cDot11sWDSPeerMacTable Definition
-- *****************************************************************************
-- *****************************************************************************
-- *  hh3cDot11sMlspExtCfgTable Definition
-- *****************************************************************************
hh3cDot11sMlspExtCfgTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Hh3cDot11sMlspExtCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to configure MLSP proxy MAC address.
        Only if the specified MP policy is modifiable and MLSP
        is enabled, the row of this table can be created and deleted.
        The row of this table cannot be modified."
    ::= { hh3cDot11sConfigGroup 7 }

hh3cDot11sMlspExtCfgEntry OBJECT-TYPE
    SYNTAX      Hh3cDot11sMlspExtCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry contains MLSP proxy MAC address infomation."
    INDEX
        {
            hh3cDot11sMlspExtPolicyName,
            hh3cDot11sMlspExtProxyMac,
            hh3cDot11sMlspExtProxyVlanID
        }
    ::= { hh3cDot11sMlspExtCfgTable 1 }

Hh3cDot11sMlspExtCfgEntry ::= SEQUENCE
    {
            hh3cDot11sMlspExtPolicyName       OCTET STRING,
            hh3cDot11sMlspExtProxyMac         MacAddress,
            hh3cDot11sMlspExtProxyVlanID      Integer32,
            hh3cDot11sMlspExtProxyIP          IpAddress,
            hh3cDot11sMlspExtRowStatus        RowStatus
    }
hh3cDot11sMlspExtPolicyName OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (1..31))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object represents the MP policy name.
        An MP policy cannot be created with the name of the
        default policy.
        Modification is not supported."
    ::= { hh3cDot11sMlspExtCfgEntry 1 }

hh3cDot11sMlspExtProxyMac OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object represents the MLSP proxy MAC address."
    ::= { hh3cDot11sMlspExtCfgEntry 2 }


hh3cDot11sMlspExtProxyVlanID OBJECT-TYPE
    SYNTAX      Integer32(1..4096)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object represents the MLSP proxy VLAN ID."
    ::= { hh3cDot11sMlspExtCfgEntry 3 }

hh3cDot11sMlspExtProxyIP OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the MLSP proxy IP address."
    ::= { hh3cDot11sMlspExtCfgEntry 4 }

hh3cDot11sMlspExtRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The status of this table entry."
    ::= { hh3cDot11sMlspExtCfgEntry 5 }

-- *****************************************************************************
-- * End of hh3cDot11sMlspExtCfgTable Definition
-- *****************************************************************************
-- *****************************************************************************
-- *  hh3cDot11sMeshLinkStatusTable Definition
-- *****************************************************************************
hh3cDot11sMeshLinkStatusTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Hh3cDot11sMeshLinkStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to represent the status of mesh link."
    ::= { hh3cDot11sMeshStatusGroup 1 }

hh3cDot11sMeshLinkStatusEntry OBJECT-TYPE
    SYNTAX      Hh3cDot11sMeshLinkStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry contains status information of mesh link."
    INDEX
        {
            hh3cDot11sMeshLinkIfIndex
        }
    ::= { hh3cDot11sMeshLinkStatusTable 1 }

Hh3cDot11sMeshLinkStatusEntry ::= SEQUENCE
    {
        hh3cDot11sMeshLinkIfIndex        Unsigned32,
        hh3cDot11sMeshLinkName           OCTET STRING,
        hh3cDot11sMeshLinkBSSID          MacAddress,
        hh3cDot11sMeshLinkPeerMac        MacAddress,
        hh3cDot11sMeshLinkExistDuration  Integer32,
        hh3cDot11sMeshLinkType           INTEGER,
        hh3cDot11sMeshLinkSNR            Integer32,
        hh3cDot11sMeshLinkNoise          Integer32,
        hh3cDot11sMeshLinkPeerSNR        Integer32,
        hh3cDot11sMeshLinkPeerNoise      Integer32,
        hh3cDot11sMeshLinkPeerIPAddress  IpAddress,
        hh3cDot11sMeshLinkPeerSystemName OCTET STRING
    }

hh3cDot11sMeshLinkIfIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object represents the interface index of the mesh link."
    ::= { hh3cDot11sMeshLinkStatusEntry 1 }

hh3cDot11sMeshLinkName OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object represents the name of the mesh link."
    ::= { hh3cDot11sMeshLinkStatusEntry 2 }

hh3cDot11sMeshLinkBSSID OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object represents the BSS ID of the mesh link."
    ::= { hh3cDot11sMeshLinkStatusEntry 3 }

hh3cDot11sMeshLinkPeerMac OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object represents the peer MAC address of the mesh link."
    ::= { hh3cDot11sMeshLinkStatusEntry 4 }

hh3cDot11sMeshLinkExistDuration OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "second"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object represents the time for which the link has been up."
    ::= { hh3cDot11sMeshLinkStatusEntry 5 }

hh3cDot11sMeshLinkType OBJECT-TYPE
    SYNTAX      INTEGER
        {
            active(1),
            dormant(2)
        }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object represents the type for the link."
    ::= { hh3cDot11sMeshLinkStatusEntry 6 }

hh3cDot11sMeshLinkSNR OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "percent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the SNR for the link."
    ::= { hh3cDot11sMeshLinkStatusEntry 7 }

hh3cDot11sMeshLinkNoise OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the noise for the link."
    ::= { hh3cDot11sMeshLinkStatusEntry 8 }

hh3cDot11sMeshLinkPeerSNR OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "percent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the SNR transferred from the neighbor of this mesh link."
    ::= { hh3cDot11sMeshLinkStatusEntry 9 }

hh3cDot11sMeshLinkPeerNoise OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the noise transferred from the neighbor of this mesh link."
    ::= { hh3cDot11sMeshLinkStatusEntry 10 }

hh3cDot11sMeshLinkPeerIPAddress OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the IP address of the neighbor of this mesh link."
    ::= { hh3cDot11sMeshLinkStatusEntry 11 }

hh3cDot11sMeshLinkPeerSystemName OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the system name of the neighbor of this mesh link."
    ::= { hh3cDot11sMeshLinkStatusEntry 12 }

-- *****************************************************************************
-- * End of hh3cDot11sMeshLinkStatusTable Definition
-- *****************************************************************************

-- *****************************************************************************
-- *  hh3cDot11sMeshLinkStatisTable Definition
-- *****************************************************************************
hh3cDot11sMeshLinkStatisTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Hh3cDot11sMeshLinkStatisEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to represent the statistical information of
         mesh link."
    ::= { hh3cDot11sMeshStatusGroup 2 }

hh3cDot11sMeshLinkStatisEntry OBJECT-TYPE
    SYNTAX      Hh3cDot11sMeshLinkStatisEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry contains statistical information of mesh link."
    INDEX
        {
            hh3cDot11APElementIndex,
            hh3cDot11sMeshLinkStatIfIndex
        }
    ::= { hh3cDot11sMeshLinkStatisTable 1 }

Hh3cDot11sMeshLinkStatisEntry ::= SEQUENCE
    {
        hh3cDot11sMeshLinkStatIfIndex    Unsigned32,
        hh3cDot11sMeshLinkNbrIndex       Unsigned32,
        hh3cDot11sMeshLinkRxTotByte      Counter32,
        hh3cDot11sMeshLinkRxTotPkt       Counter32,
        hh3cDot11sMeshLinkRxUniPkt       Counter32,
        hh3cDot11sMeshLinkRxBrocPkt      Counter32,
        hh3cDot11sMeshLinkRxMuticPkt     Counter32,
        hh3cDot11sMeshLinkRxDiscPkt      Counter32,
        hh3cDot11sMeshLinkTxTotByte      Counter32,
        hh3cDot11sMeshLinkTxTotPkt       Counter32,
        hh3cDot11sMeshLinkTxUniPkt       Counter32,
        hh3cDot11sMeshLinkTxBrocPkt      Counter32,
        hh3cDot11sMeshLinkTxMuticPkt     Counter32,
        hh3cDot11sMeshLinkTxDiscPkt      Counter32,
        hh3cDot11sMeshLinkIFName         OCTET STRING
    }

hh3cDot11sMeshLinkStatIfIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object represents the interface index of the mesh link."
    ::= { hh3cDot11sMeshLinkStatisEntry 1 }

hh3cDot11sMeshLinkNbrIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the neighbor index of the mesh link."
    ::= { hh3cDot11sMeshLinkStatisEntry 2 }

hh3cDot11sMeshLinkRxTotByte OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the amount of bytes that the mesh link received."
    ::= { hh3cDot11sMeshLinkStatisEntry 3 }

hh3cDot11sMeshLinkRxTotPkt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the amount of packets that the mesh link received."
    ::= { hh3cDot11sMeshLinkStatisEntry 4 }

hh3cDot11sMeshLinkRxUniPkt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the amount of unicast packets that the mesh link received."
    ::= { hh3cDot11sMeshLinkStatisEntry 5 }

hh3cDot11sMeshLinkRxBrocPkt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the amount of broadcast packets that the mesh link
         received."
    ::= { hh3cDot11sMeshLinkStatisEntry 6 }

hh3cDot11sMeshLinkRxMuticPkt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the amount of multicast packets that the mesh link
         received."
    ::= { hh3cDot11sMeshLinkStatisEntry 7 }

hh3cDot11sMeshLinkRxDiscPkt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the amount of packets that the mesh link discarded."
    ::= { hh3cDot11sMeshLinkStatisEntry 8 }

hh3cDot11sMeshLinkTxTotByte OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the total amount of bytes that the mesh link transmitted."
    ::= { hh3cDot11sMeshLinkStatisEntry 9 }

hh3cDot11sMeshLinkTxTotPkt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the total amount of packets that the mesh link transmitted."
    ::= { hh3cDot11sMeshLinkStatisEntry 10 }

hh3cDot11sMeshLinkTxUniPkt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the amount of unicast packets that the mesh link
         transmitted."
    ::= { hh3cDot11sMeshLinkStatisEntry 11 }

hh3cDot11sMeshLinkTxBrocPkt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the amount of broadcast packets that the mesh link
         transmitted."
    ::= { hh3cDot11sMeshLinkStatisEntry 12 }

hh3cDot11sMeshLinkTxMuticPkt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the amount of multicast packets that the mesh link
         transmitted."
    ::= { hh3cDot11sMeshLinkStatisEntry 13 }

hh3cDot11sMeshLinkTxDiscPkt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the amount of discarded packets that the mesh link
         transmitted."
    ::= { hh3cDot11sMeshLinkStatisEntry 14 }

hh3cDot11sMeshLinkIFName    OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the name of mesh link interface."
    ::= { hh3cDot11sMeshLinkStatisEntry 15 }

-- *****************************************************************************
-- * End of hh3cDot11sMeshLinkStatisTable Definition
-- *****************************************************************************

-- *****************************************************************************
-- *  hh3cDot11sMeshNbrStatusTable Definition
-- *****************************************************************************
hh3cDot11sMeshNbrStatusTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Hh3cDot11sMeshNbrStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table represents the status information for the neighbors of MP."
    ::= { hh3cDot11sMeshStatusGroup 3 }

hh3cDot11sMeshNbrStatusEntry OBJECT-TYPE
    SYNTAX      Hh3cDot11sMeshNbrStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry of the table will provide status information for the
         neighbors of MP."
    INDEX
        {
            hh3cDot11APElementIndex,
            hh3cDot11sMeshNbrIndex
        }
    ::= { hh3cDot11sMeshNbrStatusTable 1 }

Hh3cDot11sMeshNbrStatusEntry ::= SEQUENCE
    {
        hh3cDot11sMeshNbrIndex          Unsigned32,
        hh3cDot11sMeshNbrRadioID        Unsigned32,
        hh3cDot11sMeshLocalMeshID       OCTET STRING,
        hh3cDot11sMeshNbrMeshID         OCTET STRING,
        hh3cDot11sMeshNbrBSSID          MacAddress,
        hh3cDot11sMeshNbrPeerMac        MacAddress,
        hh3cDot11sMeshLinkInMp          Unsigned32,
        hh3cDot11sMeshMPLinkStatus      INTEGER,
        hh3cDot11sMeshNbrChannel        Unsigned32,
        hh3cDot11sMeshNbrLinkDuration   Integer32,
        hh3cDot11sMeshNbrRSSI           Integer32,
        hh3cDot11sMeshNbrSNR            Integer32
    }

hh3cDot11sMeshNbrIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Represents the index for the neighbor."
    ::= { hh3cDot11sMeshNbrStatusEntry 1 }

hh3cDot11sMeshNbrRadioID OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the radio ID of the neighbor."
    ::= { hh3cDot11sMeshNbrStatusEntry 2 }

hh3cDot11sMeshLocalMeshID OBJECT-TYPE
    SYNTAX      OCTET STRING(SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the local mesh ID."
    ::= { hh3cDot11sMeshNbrStatusEntry 3 }

hh3cDot11sMeshNbrMeshID OBJECT-TYPE
    SYNTAX      OCTET STRING(SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the mesh ID of the neighbor."
    ::= { hh3cDot11sMeshNbrStatusEntry 4 }

hh3cDot11sMeshNbrBSSID OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the BSS ID of the neighbor."
    ::= { hh3cDot11sMeshNbrStatusEntry 5 }

hh3cDot11sMeshNbrPeerMac OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the MAC address of the peer neighbor."
    ::= { hh3cDot11sMeshNbrStatusEntry 6 }

hh3cDot11sMeshLinkInMp OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the interface index of mesh link that used to connect with
         this neighbor."
    ::= { hh3cDot11sMeshNbrStatusEntry 7 }

hh3cDot11sMeshMPLinkStatus OBJECT-TYPE
    SYNTAX      INTEGER
        {
            processing(1),
            up(2),
            down(3)
        }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the status of mesh link that used to connect with this
         neighbor."
    ::= { hh3cDot11sMeshNbrStatusEntry 8 }

hh3cDot11sMeshNbrChannel OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the channel number used by this neighbor."
    ::= { hh3cDot11sMeshNbrStatusEntry 9 }

hh3cDot11sMeshNbrLinkDuration OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "second"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the duration of mesh link that used to connect with this
         neighbor."
    ::= { hh3cDot11sMeshNbrStatusEntry 10 }

hh3cDot11sMeshNbrRSSI OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the RSSI of mesh link that used to connect with this
         neighbor."
    ::= { hh3cDot11sMeshNbrStatusEntry 11 }

hh3cDot11sMeshNbrSNR OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "percent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the SNR of mesh link that used to connect with this
         neighbor."
    ::= { hh3cDot11sMeshNbrStatusEntry 12 }

-- *****************************************************************************
-- *  End of hh3cDot11sMeshNbrStatusTable Definition
-- *****************************************************************************
-- *****************************************************************************
-- *  hh3cDot11sMeshLinkTraps Definition
-- *****************************************************************************

hh3cDot11sMeshLinkTraps OBJECT IDENTIFIER ::= { hh3cDot11sMeshLinkNotifyGroup 0 }

hh3cDot11sMeshLinkSwitchTrap NOTIFICATION-TYPE
    OBJECTS
        {
            hh3cDot11sMeshLinkBSSIDMAC,
            hh3cDot11sMeshLinkPeerMAC
        }
    STATUS        current
    DESCRIPTION
        "This notification is to indicate the occurrence of a mesh link switchover."
    ::= { hh3cDot11sMeshLinkTraps 1 }

hh3cDot11sMeshLinkTrapObjects OBJECT IDENTIFIER ::= { hh3cDot11sMeshLinkNotifyGroup 1 }

hh3cDot11sMeshLinkBSSIDMAC OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "Represents the BSSID of the MP."
    ::= { hh3cDot11sMeshLinkTrapObjects 1 }

hh3cDot11sMeshLinkPeerMAC OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "Represents the MAC address of the peer MP after mesh link switchover."
    ::= { hh3cDot11sMeshLinkTrapObjects 2 }
END

