# Chinese translations for SolveSpace package.
# Copyright (C) 2020 the PACKAGE authors
# This file is distributed under the same license as the SolveSpace package.
# <lomatus@163.com>, 2020.
# 
msgid ""
msgstr ""
"Project-Id-Version: SolveSpace 3.0\n"
"Report-Msgid-Bugs-To: whitequark@whitequark.org\n"
"POT-Creation-Date: 2022-02-01 16:24+0200\n"
"PO-Revision-Date: 2021-04-03 13:10-0400\n"
"Last-Translator: lomatus@163.com\n"
"Language-Team: none\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 2.4.2\n"

#: clipboard.cpp:309
msgid ""
"Cut, paste, and copy work only in a workplane.\n"
"\n"
"Activate one with Sketch -> In Workplane."
msgstr ""
"仅在工作平面中剪切、粘贴和复制工作。\n"
"\n"
"使用\"工作平面中的草图 -+\"激活一个。"

#: clipboard.cpp:326
msgid "Clipboard is empty; nothing to paste."
msgstr "剪贴板为空;没有要粘贴的内容。"

#: clipboard.cpp:373
msgid "Number of copies to paste must be at least one."
msgstr "要粘贴的副本数必须至少为 1 个。"

#: clipboard.cpp:389 textscreens.cpp:833
msgid "Scale cannot be zero."
msgstr "缩放不能为零。"

#: clipboard.cpp:431
msgid "Select one point to define origin of rotation."
msgstr "选择一个点以定义旋转原点。"

#: clipboard.cpp:443
msgid "Select two points to define translation vector."
msgstr "选择两个点来定义转换向量。"

#: clipboard.cpp:453
msgid ""
"Transformation is identity. So all copies will be exactly on top of each "
"other."
msgstr "转换就是标识，因此所有的复制在彼此之上。"

#: clipboard.cpp:457
msgid "Too many items to paste; split this into smaller pastes."
msgstr "要粘贴的项目太多; 请把他们拆分。"

#: clipboard.cpp:462
msgid "No workplane active."
msgstr "没有工作平面处于活动状态。"

#: confscreen.cpp:381
msgid "Bad format: specify coordinates as x, y, z"
msgstr "格式错误：将坐标指定为 x、y、z"

#: confscreen.cpp:391 style.cpp:729 textscreens.cpp:864
msgid "Bad format: specify color as r, g, b"
msgstr "格式错误：将颜色指定为 r、g、b"

#: confscreen.cpp:417
msgid ""
"The perspective factor will have no effect until you enable View -> Use "
"Perspective Projection."
msgstr "在启用\"视图 -= 使用透视投影\"之前，透视因子将不起作用。"

#: confscreen.cpp:435 confscreen.cpp:445
#, c-format
msgid "Specify between 0 and %d digits after the decimal."
msgstr "在十进制之后指定 0 和 %d 数字之间。"

#: confscreen.cpp:457
msgid "Export scale must not be zero!"
msgstr "输出比例不能为零！"

#: confscreen.cpp:469
msgid "Cutter radius offset must not be negative!"
msgstr "刀具半径偏移不能为负数！"

#: confscreen.cpp:528
msgid "Bad value: autosave interval should be positive"
msgstr "坏值：自动保存间隔应为正"

#: confscreen.cpp:531
msgid "Bad format: specify interval in integral minutes"
msgstr "格式错误：以整数分钟为单位指定间隔"

#: constraint.cpp:12
msgctxt "constr-name"
msgid "pts-coincident"
msgstr "点约束"

#: constraint.cpp:13
msgctxt "constr-name"
msgid "pt-pt-distance"
msgstr "点点间距"

#: constraint.cpp:14
msgctxt "constr-name"
msgid "pt-line-distance"
msgstr "线长"

#: constraint.cpp:15
msgctxt "constr-name"
msgid "pt-plane-distance"
msgstr "平面具体"

#: constraint.cpp:16
msgctxt "constr-name"
msgid "pt-face-distance"
msgstr "面间距"

#: constraint.cpp:17
msgctxt "constr-name"
msgid "proj-pt-pt-distance"
msgstr "点点距离"

#: constraint.cpp:18
msgctxt "constr-name"
msgid "pt-in-plane"
msgstr "点在面"

#: constraint.cpp:19
msgctxt "constr-name"
msgid "pt-on-line"
msgstr "点在线"

#: constraint.cpp:20
msgctxt "constr-name"
msgid "pt-on-face"
msgstr "点在面"

#: constraint.cpp:21
msgctxt "constr-name"
msgid "eq-length"
msgstr "长度相同"

#: constraint.cpp:22
msgctxt "constr-name"
msgid "eq-length-and-pt-ln-dist"
msgstr "长度相等且点在距离"

#: constraint.cpp:23
msgctxt "constr-name"
msgid "eq-pt-line-distances"
msgstr "点线距离相等"

#: constraint.cpp:24
msgctxt "constr-name"
msgid "length-ratio"
msgstr "长度比率"

#: constraint.cpp:25
msgctxt "constr-name"
msgid "arc-arc-length-ratio"
msgstr ""

#: constraint.cpp:26
msgctxt "constr-name"
msgid "arc-line-length-ratio"
msgstr ""

#: constraint.cpp:27
msgctxt "constr-name"
msgid "length-difference"
msgstr "长度不同"

#: constraint.cpp:28
msgctxt "constr-name"
msgid "arc-arc-len-difference"
msgstr ""

#: constraint.cpp:29
msgctxt "constr-name"
msgid "arc-line-len-difference"
msgstr ""

#: constraint.cpp:30
msgctxt "constr-name"
msgid "symmetric"
msgstr "对称的"

#: constraint.cpp:31
msgctxt "constr-name"
msgid "symmetric-h"
msgstr "水平对称"

#: constraint.cpp:32
msgctxt "constr-name"
msgid "symmetric-v"
msgstr "纵向对称"

#: constraint.cpp:33
msgctxt "constr-name"
msgid "symmetric-line"
msgstr "线对称"

#: constraint.cpp:34
msgctxt "constr-name"
msgid "at-midpoint"
msgstr "在中点"

#: constraint.cpp:35
msgctxt "constr-name"
msgid "horizontal"
msgstr "水平约束"

#: constraint.cpp:36
msgctxt "constr-name"
msgid "vertical"
msgstr "垂直约束"

#: constraint.cpp:37
msgctxt "constr-name"
msgid "diameter"
msgstr "直径约束"

#: constraint.cpp:38
msgctxt "constr-name"
msgid "pt-on-circle"
msgstr "圆点约束"

#: constraint.cpp:39
msgctxt "constr-name"
msgid "same-orientation"
msgstr "相同原点"

#: constraint.cpp:40
msgctxt "constr-name"
msgid "angle"
msgstr "角度约束"

#: constraint.cpp:41
msgctxt "constr-name"
msgid "parallel"
msgstr "平行约束"

#: constraint.cpp:42
msgctxt "constr-name"
msgid "arc-line-tangent"
msgstr "弧切线"

#: constraint.cpp:43
msgctxt "constr-name"
msgid "cubic-line-tangent"
msgstr "立方体切线"

#: constraint.cpp:44
msgctxt "constr-name"
msgid "curve-curve-tangent"
msgstr "曲线间切线"

#: constraint.cpp:45
msgctxt "constr-name"
msgid "perpendicular"
msgstr "垂直约束"

#: constraint.cpp:46
msgctxt "constr-name"
msgid "eq-radius"
msgstr "等于半径"

#: constraint.cpp:47
msgctxt "constr-name"
msgid "eq-angle"
msgstr "等于角度"

#: constraint.cpp:48
msgctxt "constr-name"
msgid "eq-line-len-arc-len"
msgstr "等于线长或弧长"

#: constraint.cpp:49
msgctxt "constr-name"
msgid "lock-where-dragged"
msgstr "锁定位置"

#: constraint.cpp:50
msgctxt "constr-name"
msgid "comment"
msgstr "备注"

#: constraint.cpp:144
msgid ""
"The tangent arc and line segment must share an endpoint. Constrain them with "
"Constrain -> On Point before constraining tangent."
msgstr "切线弧和线段必须共享一个端点。在约束切线之前，使用约束 -= 点约束它们。"

#: constraint.cpp:163
msgid ""
"The tangent cubic and line segment must share an endpoint. Constrain them "
"with Constrain -> On Point before constraining tangent."
msgstr ""
"切线立方段和线段必须共享终结点。在约束切线之前，使用约束 -= 点约束它们。"

#: constraint.cpp:189
msgid ""
"The curves must share an endpoint. Constrain them with Constrain -> On Point "
"before constraining tangent."
msgstr "曲线必须共享一个终结点。在约束切线之前，使用约束 -= 点约束它们。"

#: constraint.cpp:238
msgid ""
"Bad selection for distance / diameter constraint. This constraint can apply "
"to:\n"
"\n"
"    * two points (distance between points)\n"
"    * a line segment (length)\n"
"    * two points and a line segment or normal (projected distance)\n"
"    * a workplane and a point (minimum distance)\n"
"    * a line segment and a point (minimum distance)\n"
"    * a plane face and a point (minimum distance)\n"
"    * a circle or an arc (diameter)\n"
msgstr ""
"距离/直径约束的选择错误。此约束可应用于：\n"
"\n"
"* 两点（点之间的距离）\n"
"    * 线段（长度）\n"
"    * 两个点和线段或法线（投影距离）\n"
"    * 工作平面和点（最小距离）\n"
"    * 线段和点（最小距离）\n"
"    * 平面面和点（最小距离）\n"
"    * 圆或弧（直径）\n"

#: constraint.cpp:291
msgid ""
"Bad selection for on point / curve / plane constraint. This constraint can "
"apply to:\n"
"\n"
"    * two points (points coincident)\n"
"    * a point and a workplane (point in plane)\n"
"    * a point and a line segment (point on line)\n"
"    * a point and a circle or arc (point on curve)\n"
"    * a point and a plane face (point on face)\n"
msgstr ""
"点 / 曲线 / 平面约束的选定方法错误。此约束可应用于：\n"
"\n"
"* 两点（点重合）\n"
"    * 一个点和一个工作平面（平面中点）\n"
"    * 点和线段（点在线）\n"
"    * 一个点和一个圆或圆（曲线上的点）\n"
"    * 点和平面面（点在脸上）\n"

#: constraint.cpp:353
msgid ""
"Bad selection for equal length / radius constraint. This constraint can "
"apply to:\n"
"\n"
"    * two line segments (equal length)\n"
"    * two line segments and two points (equal point-line distances)\n"
"    * a line segment and two points (equal point-line distances)\n"
"    * a line segment, and a point and line segment (point-line distance "
"equals length)\n"
"    * four line segments or normals (equal angle between A,B and C,D)\n"
"    * three line segments or normals (equal angle between A,B and B,C)\n"
"    * two circles or arcs (equal radius)\n"
"    * a line segment and an arc (line segment length equals arc length)\n"
msgstr ""
"等长度/半径约束的选定方法错误。此约束可应用于：\n"
"\n"
"* 两个线段（相等长度）\n"
"    * 两个线段和两个点（相等的点线距离）\n"
"    * 线段和两个点（相等的点线距离）\n"
"    * 线段和点段和线段（点线距离等于长度）\n"
"    * 四条线段或法线（A、B 和 C、D 之间的等角）\n"
"    * 三条线段或法线（A、B 和 B、C 之间的等角）\n"
"    * 两个圆或圆（相等半径）\n"
"    * 线段和圆弧（线段长度等于弧长）\n"

#: constraint.cpp:407
msgid ""
"Bad selection for length ratio constraint. This constraint can apply to:\n"
"\n"
"    * two line segments\n"
"    * two arcs\n"
"    * one arc and one line segment\n"
msgstr ""

#: constraint.cpp:441
msgid ""
"Bad selection for length difference constraint. This constraint can apply "
"to:\n"
"\n"
"    * two line segments\n"
"    * two arcs\n"
"    * one arc and one line segment\n"
msgstr ""

#: constraint.cpp:472
msgid ""
"Bad selection for at midpoint constraint. This constraint can apply to:\n"
"\n"
"    * a line segment and a point (point at midpoint)\n"
"    * a line segment and a workplane (line's midpoint on plane)\n"
msgstr ""
"中点约束的选定方法错误。此约束可应用于：\n"
"\n"
"* 线段和点（点在中点）\n"
"    * 线段和工作平面（平面上的线中点）\n"

#: constraint.cpp:530
msgid ""
"Bad selection for symmetric constraint. This constraint can apply to:\n"
"\n"
"    * two points or a line segment (symmetric about workplane's coordinate "
"axis)\n"
"    * line segment, and two points or a line segment (symmetric about line "
"segment)\n"
"    * workplane, and two points or a line segment (symmetric about "
"workplane)\n"
msgstr ""
"对称约束的选择错误。此约束可应用于：\n"
"\n"
"* 两个点或线段（与工作平面的坐标轴对称）\n"
"    * 线段，和两个点或线段（对称的线段）\n"
"    * 工作平面和两个点或线段（工作平面对称）\n"

#: constraint.cpp:545
msgid ""
"A workplane must be active when constraining symmetric without an explicit "
"symmetry plane."
msgstr "在没有显式对称平面约束对称时，工作平面必须处于活动状态。"

#: constraint.cpp:579
msgid ""
"Activate a workplane (with Sketch -> In Workplane) before applying a "
"horizontal or vertical constraint."
msgstr "在应用水平或垂直约束之前，激活工作平面（使用草图 -= 在工作平面中）。"

#: constraint.cpp:592
msgid ""
"Bad selection for horizontal / vertical constraint. This constraint can "
"apply to:\n"
"\n"
"    * two points\n"
"    * a line segment\n"
msgstr ""
"水平/垂直约束的选择错误。此约束可应用于：\n"
"\n"
"• 两点\n"
"    • 线段\n"

#: constraint.cpp:613
msgid ""
"Bad selection for same orientation constraint. This constraint can apply "
"to:\n"
"\n"
"    * two normals\n"
msgstr ""
"同一方向约束的选择错误。此约束可应用于：\n"
"\n"
"• 两个法线\n"

#: constraint.cpp:663
msgid "Must select an angle constraint."
msgstr "必须选择角度约束。"

#: constraint.cpp:676
msgid "Must select a constraint with associated label."
msgstr "必须选择具有关联标签的约束。"

#: constraint.cpp:687
msgid ""
"Bad selection for angle constraint. This constraint can apply to:\n"
"\n"
"    * two line segments\n"
"    * a line segment and a normal\n"
"    * two normals\n"
msgstr ""
"角度约束的选择错误。此约束可应用于：\n"
"\n"
"* 两个线段\n"
"    * 线段和法线\n"
"    • 两个法线\n"

#: constraint.cpp:754
msgid "Curve-curve tangency must apply in workplane."
msgstr "曲线曲线切线必须应用于工作平面。"

#: constraint.cpp:766
msgid ""
"Bad selection for parallel / tangent constraint. This constraint can apply "
"to:\n"
"\n"
"    * two line segments (parallel)\n"
"    * a line segment and a normal (parallel)\n"
"    * two normals (parallel)\n"
"    * two line segments, arcs, or beziers, that share an endpoint (tangent)\n"
msgstr ""
"平行/切线约束的选择错误。此约束可应用于：\n"
"\n"
"* 两条线段（平行）\n"
"    * 线段和法线（平行）\n"
"    * 两个法线（平行）\n"
"    * 共享端点的两条线段、弧线或贝塞尔（切线）\n"

#: constraint.cpp:784
msgid ""
"Bad selection for perpendicular constraint. This constraint can apply to:\n"
"\n"
"    * two line segments\n"
"    * a line segment and a normal\n"
"    * two normals\n"
msgstr ""
"垂直约束的选择错误。此约束可应用于：\n"
"\n"
"* 两个线段\n"
"    * 线段和法线\n"
"    • 两个法线\n"

#: constraint.cpp:799
msgid ""
"Bad selection for lock point where dragged constraint. This constraint can "
"apply to:\n"
"\n"
"    * a point\n"
msgstr ""
"拖动约束的锁点选择错误。此约束可应用于：\n"
"\n"
"• 一点\n"

#: constraint.cpp:813 mouse.cpp:1158
msgid "NEW COMMENT -- DOUBLE-CLICK TO EDIT"
msgstr "新备注 - 双击编辑"

#: constraint.cpp:818
msgid "click center of comment text"
msgstr "单击注释文本的中心"

#: export.cpp:19
msgid ""
"No solid model present; draw one with extrudes and revolves, or use Export "
"2d View to export bare lines and curves."
msgstr ""
"不存在实体模型;使用拉伸和旋转绘制一个，或使用导出 2d 视图导出裸线和曲线。"

#: export.cpp:61
msgid ""
"Bad selection for export section. Please select:\n"
"\n"
"    * nothing, with an active workplane (workplane is section plane)\n"
"    * a face (section plane through face)\n"
"    * a point and two line segments (plane through point and parallel to "
"lines)\n"
msgstr ""
"导出部分的选择错误。请选择：\n"
"\n"
"* 无，带活动工作平面（工作平面为剖面平面）\n"
"    * 脸（通过面的剖面）\n"
"    * 一个点和两个线段（平面穿过点和平行线）\n"

#: export.cpp:818
msgid "Active group mesh is empty; nothing to export."
msgstr "活动组网格为空;没有要导出的。"

#: exportvector.cpp:336
msgid "freehand lines were replaced with continuous lines"
msgstr "徒手线替换为连续线"

#: exportvector.cpp:338
msgid "zigzag lines were replaced with continuous lines"
msgstr "锯齿线替换为连续线"

#: exportvector.cpp:592
msgid ""
"Some aspects of the drawing have no DXF equivalent and were not exported:\n"
msgstr "绘图的某些方面没有 DXF 等效项，并且未导出：\n"

#: exportvector.cpp:838
msgid ""
"PDF page size exceeds 200 by 200 inches; many viewers may reject this file."
msgstr "PDF 页面大小超过 200 英寸或 200 英寸;许多查看器可能会拒绝此文件。"

#: file.cpp:44 group.cpp:91
msgctxt "group-name"
msgid "sketch-in-plane"
msgstr "平面草图"

#: file.cpp:62
msgctxt "group-name"
msgid "#references"
msgstr "#参考"

#: file.cpp:550
msgid "The file is empty. It may be corrupt."
msgstr ""

#: file.cpp:555
msgid ""
"Unrecognized data in file. This file may be corrupt, or from a newer version "
"of the program."
msgstr "未识别文件内数据。该文件可能损坏，或使用新版本应用程序尝试打开。"

#: file.cpp:867
msgctxt "title"
msgid "Missing File"
msgstr "文件丢失"

#: file.cpp:868
#, c-format
msgctxt "dialog"
msgid "The linked file “%s” is not present."
msgstr "连接的文件不存在：\"%s\"。"

#: file.cpp:870
msgctxt "dialog"
msgid ""
"Do you want to locate it manually?\n"
"\n"
"If you decline, any geometry that depends on the missing file will be "
"permanently removed."
msgstr "您是否想手工查找？如果是，所有基于该丢失文件的几何对象将会被全部删除."

#: file.cpp:873
msgctxt "button"
msgid "&Yes"
msgstr "是(&Y)"

#: file.cpp:875
msgctxt "button"
msgid "&No"
msgstr "否(&N)"

#: file.cpp:877 solvespace.cpp:611
msgctxt "button"
msgid "&Cancel"
msgstr "取消(&C)"

#: graphicswin.cpp:41
msgid "&File"
msgstr "文件(&F)"

#: graphicswin.cpp:42
msgid "&New"
msgstr "新建(&N)"

#: graphicswin.cpp:43
msgid "&Open..."
msgstr "打开(&O)"

#: graphicswin.cpp:44
msgid "Open &Recent"
msgstr "打开最近使用(&R)"

#: graphicswin.cpp:45
msgid "&Save"
msgstr "保存(&S)"

#: graphicswin.cpp:46
msgid "Save &As..."
msgstr "另存为(&A)"

#: graphicswin.cpp:48
msgid "Export &Image..."
msgstr "导出图片(&I)"

#: graphicswin.cpp:49
msgid "Export 2d &View..."
msgstr "导出2D视图(&V)"

#: graphicswin.cpp:50
msgid "Export 2d &Section..."
msgstr "导出2D截面(&S)"

#: graphicswin.cpp:51
msgid "Export 3d &Wireframe..."
msgstr "导出3D线框模型(&W)"

#: graphicswin.cpp:52
msgid "Export Triangle &Mesh..."
msgstr "导出三角面模型(&M)"

#: graphicswin.cpp:53
msgid "Export &Surfaces..."
msgstr "导出表面模型(&S)"

#: graphicswin.cpp:54
msgid "Im&port..."
msgstr "导入(&P)"

#: graphicswin.cpp:57
msgid "E&xit"
msgstr "退出(&E)"

#: graphicswin.cpp:60
msgid "&Edit"
msgstr "编辑(&E)"

#: graphicswin.cpp:61
msgid "&Undo"
msgstr "回退(&U)"

#: graphicswin.cpp:62
msgid "&Redo"
msgstr "重做(&R)"

#: graphicswin.cpp:63
msgid "Re&generate All"
msgstr "重新生成所有(&G)"

#: graphicswin.cpp:65
msgid "Snap Selection to &Grid"
msgstr "选择到轴线(&G)"

#: graphicswin.cpp:66
msgid "Rotate Imported &90°"
msgstr "旋转导入模型90°  (&9)"

#: graphicswin.cpp:68
msgid "Cu&t"
msgstr "剪切 (&T)"

#: graphicswin.cpp:69
msgid "&Copy"
msgstr "复制 (&C)"

#: graphicswin.cpp:70
msgid "&Paste"
msgstr "粘贴 (&P)"

#: graphicswin.cpp:71
msgid "Paste &Transformed..."
msgstr "粘贴移动(&T)"

#: graphicswin.cpp:72
msgid "&Delete"
msgstr "删除(&D)"

#: graphicswin.cpp:74
msgid "Select &Edge Chain"
msgstr "选择边缘约束(&E)"

#: graphicswin.cpp:75
msgid "Select &All"
msgstr "选择所有(&A)"

#: graphicswin.cpp:76
msgid "&Unselect All"
msgstr "取消全选(&U)"

#: graphicswin.cpp:78
msgid "&Line Styles..."
msgstr "线型(&L)"

#: graphicswin.cpp:79
msgid "&View Projection..."
msgstr "查看投影...(&V)"

#: graphicswin.cpp:81
msgid "Con&figuration..."
msgstr "配置 (&F)"

#: graphicswin.cpp:84
msgid "&View"
msgstr "查看 (&V)"

#: graphicswin.cpp:85
msgid "Zoom &In"
msgstr "放大(&I)"

#: graphicswin.cpp:86
msgid "Zoom &Out"
msgstr "缩小(&O)"

#: graphicswin.cpp:87
msgid "Zoom To &Fit"
msgstr "自动缩放(&F)"

#: graphicswin.cpp:89
msgid "Align View to &Workplane"
msgstr "切换视图至平面(&W)"

#: graphicswin.cpp:90
msgid "Nearest &Ortho View"
msgstr "Ortho视图 (&O)"

#: graphicswin.cpp:91
msgid "Nearest &Isometric View"
msgstr "ISO视图 (&I)"

#: graphicswin.cpp:92
msgid "&Center View At Point"
msgstr "以点为中心视图 (&C)"

#: graphicswin.cpp:94
msgid "Show Snap &Grid"
msgstr "显示捕捉轴线 (&G)"

#: graphicswin.cpp:95
msgid "Darken Inactive Solids"
msgstr ""

#: graphicswin.cpp:96
msgid "Use &Perspective Projection"
msgstr "使用远景透视(&P)"

#: graphicswin.cpp:97
msgid "Show E&xploded View"
msgstr ""

#: graphicswin.cpp:98
msgid "Dimension &Units"
msgstr "标注单位(&U)"

#: graphicswin.cpp:99
msgid "Dimensions in &Millimeters"
msgstr "标注单位 mm (&M)"

#: graphicswin.cpp:100
msgid "Dimensions in M&eters"
msgstr "标注单位m (&E)"

#: graphicswin.cpp:101
msgid "Dimensions in &Inches"
msgstr "标准单位英寸 (&I)"

#: graphicswin.cpp:102
msgid "Dimensions in &Feet and Inches"
msgstr ""

#: graphicswin.cpp:104
msgid "Show &Toolbar"
msgstr "显示工具条(&T)"

#: graphicswin.cpp:105
msgid "Show Property Bro&wser"
msgstr "显示属性浏览器(&W)"

#: graphicswin.cpp:107
msgid "&Full Screen"
msgstr "全屏(&F)"

#: graphicswin.cpp:109
msgid "&New Group"
msgstr "新组合(&N)"

#: graphicswin.cpp:110
msgid "Sketch In &3d"
msgstr "在三维内绘制(&3)"

#: graphicswin.cpp:111
msgid "Sketch In New &Workplane"
msgstr "在新工作面绘制(&W)"

#: graphicswin.cpp:113
msgid "Step &Translating"
msgstr "移动(&T)"

#: graphicswin.cpp:114
msgid "Step &Rotating"
msgstr "旋转(&R)"

#: graphicswin.cpp:116
msgid "E&xtrude"
msgstr "挤出(&E)"

#: graphicswin.cpp:117
msgid "&Helix"
msgstr "螺旋(&H)"

#: graphicswin.cpp:118
msgid "&Lathe"
msgstr "扫略(&L)"

#: graphicswin.cpp:119
msgid "Re&volve"
msgstr "旋转(&V)"

#: graphicswin.cpp:121
msgid "Link / Assemble..."
msgstr "链接/装配..."

#: graphicswin.cpp:122
msgid "Link Recent"
msgstr "连接最近文件"

#: graphicswin.cpp:124
msgid "&Sketch"
msgstr "绘图(&S)"

#: graphicswin.cpp:125
msgid "In &Workplane"
msgstr "在工作平面(&W)"

#: graphicswin.cpp:126
msgid "Anywhere In &3d"
msgstr "在3D的任何位置(&3)"

#: graphicswin.cpp:128
msgid "Datum &Point"
msgstr "基准点(&P)"

#: graphicswin.cpp:129
msgid "&Workplane"
msgstr "工作面(&W)"

#: graphicswin.cpp:131
msgid "Line &Segment"
msgstr "线段(&S)"

#: graphicswin.cpp:132
msgid "C&onstruction Line Segment"
msgstr "构造线段(&C)"

#: graphicswin.cpp:133
msgid "&Rectangle"
msgstr "矩形(&R)"

#: graphicswin.cpp:134
msgid "&Circle"
msgstr "圆线(&C)"

#: graphicswin.cpp:135
msgid "&Arc of a Circle"
msgstr "圆弧(&A)"

#: graphicswin.cpp:136
msgid "&Bezier Cubic Spline"
msgstr "立方体线的贝塞尔曲线(&B)"

#: graphicswin.cpp:138
msgid "&Text in TrueType Font"
msgstr "TrueTyoe字体文字(&T)"

#: graphicswin.cpp:139
msgid "&Image"
msgstr "图片(&I)"

#: graphicswin.cpp:141
msgid "To&ggle Construction"
msgstr "切换构造(&G)"

#: graphicswin.cpp:142
msgid "Tangent &Arc at Point"
msgstr "弧线切线点(&A)"

#: graphicswin.cpp:143
msgid "Split Curves at &Intersection"
msgstr "在交叉处拆分曲线(&I)"

#: graphicswin.cpp:145
msgid "&Constrain"
msgstr "约束(&C)"

#: graphicswin.cpp:146
msgid "&Distance / Diameter"
msgstr "距离/直径(&D)"

#: graphicswin.cpp:147
msgid "Re&ference Dimension"
msgstr "参考标注(&F)"

#: graphicswin.cpp:148
msgid "A&ngle"
msgstr "角度(&A)"

#: graphicswin.cpp:149
msgid "Reference An&gle"
msgstr "参考角度(&G)"

#: graphicswin.cpp:150
msgid "Other S&upplementary Angle"
msgstr "其它增补角度(&U)"

#: graphicswin.cpp:151
msgid "Toggle R&eference Dim"
msgstr "切换参考标注(&E)"

#: graphicswin.cpp:153
msgid "&Horizontal"
msgstr "水平约束(&H)"

#: graphicswin.cpp:154
msgid "&Vertical"
msgstr "垂直约束(&V)"

#: graphicswin.cpp:156
msgid "&On Point / Curve / Plane"
msgstr "在点线面(&O)"

#: graphicswin.cpp:157
msgid "E&qual Length / Radius / Angle"
msgstr "等于/长度/半径/角度(&Q)"

#: graphicswin.cpp:158
msgid "Length / Arc Ra&tio"
msgstr ""

#: graphicswin.cpp:159
msgid "Length / Arc Diff&erence"
msgstr ""

#: graphicswin.cpp:160
msgid "At &Midpoint"
msgstr "在中点(&M)"

#: graphicswin.cpp:161
msgid "S&ymmetric"
msgstr "对称(&Y)"

#: graphicswin.cpp:162
msgid "Para&llel / Tangent"
msgstr "水平/切线(&L)"

#: graphicswin.cpp:163
msgid "&Perpendicular"
msgstr "垂直的(&P)"

#: graphicswin.cpp:164
msgid "Same Orient&ation"
msgstr "相同方向(&A)"

#: graphicswin.cpp:165
msgid "Lock Point Where &Dragged"
msgstr "锁定点位置(&D)"

#: graphicswin.cpp:167
msgid "Comment"
msgstr "备注"

#: graphicswin.cpp:169
msgid "&Analyze"
msgstr "分析(&A)"

#: graphicswin.cpp:170
msgid "Measure &Volume"
msgstr "测量体积(&V)"

#: graphicswin.cpp:171
msgid "Measure A&rea"
msgstr "测量面积(&R)"

#: graphicswin.cpp:172
msgid "Measure &Perimeter"
msgstr "测量周长(&P)"

#: graphicswin.cpp:173
msgid "Show &Interfering Parts"
msgstr "显示干涉零件(&I)"

#: graphicswin.cpp:174
msgid "Show &Naked Edges"
msgstr "显示孤立边(&N)"

#: graphicswin.cpp:175
msgid "Show &Center of Mass"
msgstr "显示中心(&C)"

#: graphicswin.cpp:177
msgid "Show &Underconstrained Points"
msgstr "显示无效约束点(&U)"

#: graphicswin.cpp:179
msgid "&Trace Point"
msgstr "跟踪点(&T)"

#: graphicswin.cpp:180
msgid "&Stop Tracing..."
msgstr "停止跟踪(&S)"

#: graphicswin.cpp:181
msgid "Step &Dimension..."
msgstr "逐步标注(&D)"

#: graphicswin.cpp:183
msgid "&Help"
msgstr "帮助(&H)"

#: graphicswin.cpp:184
msgid "&Language"
msgstr "语言(&L)"

#: graphicswin.cpp:185
msgid "&Website / Manual"
msgstr "网页/手册(&W)"

#: graphicswin.cpp:186
msgid "&Go to GitHub commit"
msgstr ""

#: graphicswin.cpp:188
msgid "&About"
msgstr "关于(&A)"

#: graphicswin.cpp:362
msgid "(no recent files)"
msgstr "(无文件)"

#: graphicswin.cpp:370
#, c-format
msgid "File '%s' does not exist."
msgstr "文件不存在: \"%s\"。"

#: graphicswin.cpp:737
msgid "No workplane is active, so the grid will not appear."
msgstr "没有激活的工作面，因此无法显示轴网。"

#: graphicswin.cpp:752
msgid ""
"The perspective factor is set to zero, so the view will always be a parallel "
"projection.\n"
"\n"
"For a perspective projection, modify the perspective factor in the "
"configuration screen. A value around 0.3 is typical."
msgstr ""

#: graphicswin.cpp:837
msgid ""
"Select a point; this point will become the center of the view on screen."
msgstr ""

#: graphicswin.cpp:1137
msgid "No additional entities share endpoints with the selected entities."
msgstr ""

#: graphicswin.cpp:1155
msgid ""
"To use this command, select a point or other entity from an linked part, or "
"make a link group the active group."
msgstr ""

#: graphicswin.cpp:1178
msgid ""
"No workplane is active. Activate a workplane (with Sketch -> In Workplane) "
"to define the plane for the snap grid."
msgstr ""

#: graphicswin.cpp:1185
msgid ""
"Can't snap these items to grid; select points, text comments, or constraints "
"with a label. To snap a line, select its endpoints."
msgstr ""

#: graphicswin.cpp:1270
msgid "No workplane selected. Activating default workplane for this group."
msgstr ""

#: graphicswin.cpp:1273
msgid ""
"No workplane is selected, and the active group does not have a default "
"workplane. Try selecting a workplane, or activating a sketch-in-new-"
"workplane group."
msgstr ""

#: graphicswin.cpp:1294
msgid ""
"Bad selection for tangent arc at point. Select a single point, or select "
"nothing to set up arc parameters."
msgstr ""

#: graphicswin.cpp:1305
msgid "click point on arc (draws anti-clockwise)"
msgstr "点击弧线的点（逆时针方向绘制）"

#: graphicswin.cpp:1306
msgid "click to place datum point"
msgstr "点击放置基准点"

#: graphicswin.cpp:1307
msgid "click first point of line segment"
msgstr "点击线条的起点"

#: graphicswin.cpp:1309
msgid "click first point of construction line segment"
msgstr "点击构造线的起点"

#: graphicswin.cpp:1310
msgid "click first point of cubic segment"
msgstr "点击立方体的起点"

#: graphicswin.cpp:1311
msgid "click center of circle"
msgstr "点击圆弧的中心"

#: graphicswin.cpp:1312
msgid "click origin of workplane"
msgstr "点击工作面的原点"

#: graphicswin.cpp:1313
msgid "click one corner of rectangle"
msgstr "点击一个矩形倒角"

#: graphicswin.cpp:1314
msgid "click top left of text"
msgstr "点击文字左上角"

#: graphicswin.cpp:1320
msgid "click top left of image"
msgstr "点击图片左上角"

#: graphicswin.cpp:1346
msgid ""
"No entities are selected. Select entities before trying to toggle their "
"construction state."
msgstr "为选中实体，切换构造状态前请先选中实体对象。"

#: group.cpp:86
msgctxt "group-name"
msgid "sketch-in-3d"
msgstr "3D草图"

#: group.cpp:150
msgid ""
"Bad selection for new sketch in workplane. This group can be created with:\n"
"\n"
"    * a point (through the point, orthogonal to coordinate axes)\n"
"    * a point and two line segments (through the point, parallel to the "
"lines)\n"
"    * a point and a normal (through the point, orthogonal to the normal)\n"
"    * a workplane (copy of the workplane)\n"
msgstr ""

#: group.cpp:166
msgid ""
"Activate a workplane (Sketch -> In Workplane) before extruding. The sketch "
"will be extruded normal to the workplane."
msgstr "挤出前先激活工作面（草图->在工作面），该草图将由工作面的法线方向挤出。"

#: group.cpp:175
msgctxt "group-name"
msgid "extrude"
msgstr "挤出"

#: group.cpp:180
msgid "Lathe operation can only be applied to planar sketches."
msgstr "扫略操作仅可用于二维草图。"

#: group.cpp:191
msgid ""
"Bad selection for new lathe group. This group can be created with:\n"
"\n"
"    * a point and a line segment or normal (revolved about an axis parallel "
"to line / normal, through point)\n"
"    * a line segment (revolved about line segment)\n"
msgstr ""
"创建扫略组失败，该组可由：\n"
"\n"
"   * 一个点和一个线段或法线（围绕坐标轴至线或法线的平行线，通过点）\n"
"   * 一个线段（围绕线段）\n"

#: group.cpp:201
msgctxt "group-name"
msgid "lathe"
msgstr "扫略"

#: group.cpp:206
msgid "Revolve operation can only be applied to planar sketches."
msgstr ""

#: group.cpp:217
msgid ""
"Bad selection for new revolve group. This group can be created with:\n"
"\n"
"    * a point and a line segment or normal (revolved about an axis parallel "
"to line / normal, through point)\n"
"    * a line segment (revolved about line segment)\n"
msgstr ""

#: group.cpp:229
msgctxt "group-name"
msgid "revolve"
msgstr "旋转"

#: group.cpp:234
msgid "Helix operation can only be applied to planar sketches."
msgstr ""

#: group.cpp:245
msgid ""
"Bad selection for new helix group. This group can be created with:\n"
"\n"
"    * a point and a line segment or normal (revolved about an axis parallel "
"to line / normal, through point)\n"
"    * a line segment (revolved about line segment)\n"
msgstr ""

#: group.cpp:257
msgctxt "group-name"
msgid "helix"
msgstr "螺旋"

#: group.cpp:270
msgid ""
"Bad selection for new rotation. This group can be created with:\n"
"\n"
"    * a point, while locked in workplane (rotate in plane, about that "
"point)\n"
"    * a point and a line or a normal (rotate about an axis through the "
"point, and parallel to line / normal)\n"
msgstr ""

#: group.cpp:283
msgctxt "group-name"
msgid "rotate"
msgstr "旋转"

#: group.cpp:294
msgctxt "group-name"
msgid "translate"
msgstr "移动"

#: group.cpp:416
msgid "(unnamed)"
msgstr "(未命名)"

#: groupmesh.cpp:707
msgid "not closed contour, or not all same style!"
msgstr "未闭合轮廓 , 或样式不一致!"

#: groupmesh.cpp:720
msgid "points not all coplanar!"
msgstr "点不在相同平面！"

#: groupmesh.cpp:722
msgid "contour is self-intersecting!"
msgstr "轮廓自相交！"

#: groupmesh.cpp:724
msgid "zero-length edge!"
msgstr "边缘长度为零！"

#: importmesh.cpp:136
msgid "Text-formated STL files are not currently supported"
msgstr ""

#: modify.cpp:252
msgid "Must be sketching in workplane to create tangent arc."
msgstr ""

#: modify.cpp:299
msgid ""
"To create a tangent arc, select a point where two non-construction lines or "
"circles in this group and workplane join."
msgstr ""

#: modify.cpp:386
msgid ""
"Couldn't round this corner. Try a smaller radius, or try creating the "
"desired geometry by hand with tangency constraints."
msgstr ""

#: modify.cpp:595
msgid "Couldn't split this entity; lines, circles, or cubics only."
msgstr ""

#: modify.cpp:622
msgid "Must be sketching in workplane to split."
msgstr ""

#: modify.cpp:629
msgid ""
"Select two entities that intersect each other (e.g. two lines/circles/arcs "
"or a line/circle/arc and a point)."
msgstr ""

#: modify.cpp:734
msgid "Can't split; no intersection found."
msgstr "无法拆分；未发现较差点。"

#: mouse.cpp:557
msgid "Assign to Style"
msgstr "指定样式"

#: mouse.cpp:573
msgid "No Style"
msgstr "无样式"

#: mouse.cpp:576
msgid "Newly Created Custom Style..."
msgstr "新组样式。"

#: mouse.cpp:583
msgid "Group Info"
msgstr "组信息"

#: mouse.cpp:603
msgid "Style Info"
msgstr "样式信息"

#: mouse.cpp:623
msgid "Select Edge Chain"
msgstr "选择边缘链"

#: mouse.cpp:629
msgid "Toggle Reference Dimension"
msgstr "切换参考标注"

#: mouse.cpp:635
msgid "Other Supplementary Angle"
msgstr "其它补充角度"

#: mouse.cpp:640
msgid "Snap to Grid"
msgstr "捕捉至轴网"

#: mouse.cpp:649
msgid "Remove Spline Point"
msgstr "删除样条线的点"

#: mouse.cpp:684
msgid "Add Spline Point"
msgstr "增加样条线的点"

#: mouse.cpp:688
msgid "Cannot add spline point: maximum number of points reached."
msgstr "无法增加样条线点：超过最大限制。"

#: mouse.cpp:713
msgid "Toggle Construction"
msgstr "切换构造"

#: mouse.cpp:729
msgid "Delete Point-Coincident Constraint"
msgstr "删除点一致约束"

#: mouse.cpp:747
msgid "Cut"
msgstr "剪切"

#: mouse.cpp:749
msgid "Copy"
msgstr "复制"

#: mouse.cpp:753
msgid "Select All"
msgstr "全选"

#: mouse.cpp:758
msgid "Paste"
msgstr "粘贴"

#: mouse.cpp:760
msgid "Paste Transformed..."
msgstr "粘贴移动的..."

#: mouse.cpp:765
msgid "Delete"
msgstr "删除"

#: mouse.cpp:768
msgid "Unselect All"
msgstr "取消全选"

#: mouse.cpp:775
msgid "Unselect Hovered"
msgstr "取消覆盖区域的全选"

#: mouse.cpp:784
msgid "Zoom to Fit"
msgstr "自动缩放"

#: mouse.cpp:986 mouse.cpp:1274
msgid "click next point of line, or press Esc"
msgstr "点击下一个点或取消(ESC)"

#: mouse.cpp:992
msgid ""
"Can't draw rectangle in 3d; first, activate a workplane with Sketch -> In "
"Workplane."
msgstr "无法在3D内绘制矩形; 首先，激活工作面，草图->在工作面。"

#: mouse.cpp:1026
msgid "click to place other corner of rectangle"
msgstr "点击放置其它矩形倒角"

#: mouse.cpp:1047
msgid "click to set radius"
msgstr "点击设置半径"

#: mouse.cpp:1052
msgid ""
"Can't draw arc in 3d; first, activate a workplane with Sketch -> In "
"Workplane."
msgstr "无法在3D空间内绘制弧线，可使用 草图->在工作面 激活工作面。"

#: mouse.cpp:1071
msgid "click to place point"
msgstr "点击放置点"

#: mouse.cpp:1087
msgid "click next point of cubic, or press Esc"
msgstr "点击下一个点或取消(ESC)"

#: mouse.cpp:1092
msgid ""
"Sketching in a workplane already; sketch in 3d before creating new workplane."
msgstr "已经在工作面绘制；在新建工作面前在三维空间绘制。"

#: mouse.cpp:1108
msgid ""
"Can't draw text in 3d; first, activate a workplane with Sketch -> In "
"Workplane."
msgstr "无法在三维空间内绘制文字，可使用 草图->在工作面 激活工作面。"

#: mouse.cpp:1125
msgid "click to place bottom right of text"
msgstr "点击文字的右下角放置"

#: mouse.cpp:1131
msgid ""
"Can't draw image in 3d; first, activate a workplane with Sketch -> In "
"Workplane."
msgstr "无法在三维空间内绘制图片，可使用 草图->在工作面 激活工作面。"

#: platform/gui.cpp:85 platform/gui.cpp:90 solvespace.cpp:553
msgctxt "file-type"
msgid "SolveSpace models"
msgstr "SolveSpace模型"

#: platform/gui.cpp:89
msgctxt "file-type"
msgid "ALL"
msgstr ""

#: platform/gui.cpp:91
msgctxt "file-type"
msgid "IDF circuit board"
msgstr ""

#: platform/gui.cpp:92
msgctxt "file-type"
msgid "STL triangle mesh"
msgstr ""

#: platform/gui.cpp:96
msgctxt "file-type"
msgid "PNG image"
msgstr "PNG图片"

#: platform/gui.cpp:100
msgctxt "file-type"
msgid "STL mesh"
msgstr "STL网格"

#: platform/gui.cpp:101
msgctxt "file-type"
msgid "Wavefront OBJ mesh"
msgstr "Wavefront OBJ网格"

#: platform/gui.cpp:102
msgctxt "file-type"
msgid "Three.js-compatible mesh, with viewer"
msgstr "Three.js-网格及查看视图"

#: platform/gui.cpp:103
msgctxt "file-type"
msgid "Three.js-compatible mesh, mesh only"
msgstr "Three.js-仅网格"

#: platform/gui.cpp:104
msgctxt "file-type"
msgid "VRML text file"
msgstr "VRML文本文件"

#: platform/gui.cpp:108 platform/gui.cpp:115 platform/gui.cpp:122
msgctxt "file-type"
msgid "STEP file"
msgstr "STEP文件"

#: platform/gui.cpp:112
msgctxt "file-type"
msgid "PDF file"
msgstr "PDF文件"

#: platform/gui.cpp:113
msgctxt "file-type"
msgid "Encapsulated PostScript"
msgstr "封装好的PostScript"

#: platform/gui.cpp:114
msgctxt "file-type"
msgid "Scalable Vector Graphics"
msgstr "SVG矢量图"

#: platform/gui.cpp:116 platform/gui.cpp:123
msgctxt "file-type"
msgid "DXF file (AutoCAD 2007)"
msgstr "DXF文件(AutoCAD 2007)"

#: platform/gui.cpp:117
msgctxt "file-type"
msgid "HPGL file"
msgstr "HPGL文件"

#: platform/gui.cpp:118
msgctxt "file-type"
msgid "G Code"
msgstr "G Code"

#: platform/gui.cpp:127
msgctxt "file-type"
msgid "AutoCAD DXF and DWG files"
msgstr "AutoCAD DXF/DWG文件"

#: platform/gui.cpp:131
msgctxt "file-type"
msgid "Comma-separated values"
msgstr "逗号分隔数据"

#: platform/guigtk.cpp:1382 platform/guimac.mm:1509 platform/guiwin.cpp:1641
msgid "untitled"
msgstr "未命名"

#: platform/guigtk.cpp:1393 platform/guigtk.cpp:1426 platform/guimac.mm:1467
#: platform/guiwin.cpp:1639
msgctxt "title"
msgid "Save File"
msgstr "保存文件"

#: platform/guigtk.cpp:1394 platform/guigtk.cpp:1427 platform/guimac.mm:1450
#: platform/guiwin.cpp:1645
msgctxt "title"
msgid "Open File"
msgstr "打开文件"

#: platform/guigtk.cpp:1397 platform/guigtk.cpp:1433
msgctxt "button"
msgid "_Cancel"
msgstr "取消_C"

#: platform/guigtk.cpp:1398 platform/guigtk.cpp:1431
msgctxt "button"
msgid "_Save"
msgstr "保存_S"

#: platform/guigtk.cpp:1399 platform/guigtk.cpp:1432
msgctxt "button"
msgid "_Open"
msgstr "打开_O"

#: solvespace.cpp:171
msgctxt "title"
msgid "Autosave Available"
msgstr ""

#: solvespace.cpp:172
msgctxt "dialog"
msgid "An autosave file is available for this sketch."
msgstr ""

#: solvespace.cpp:173
msgctxt "dialog"
msgid "Do you want to load the autosave file instead?"
msgstr ""

#: solvespace.cpp:174
msgctxt "button"
msgid "&Load autosave"
msgstr ""

#: solvespace.cpp:176
msgctxt "button"
msgid "Do&n't Load"
msgstr ""

#: solvespace.cpp:599
msgctxt "title"
msgid "Modified File"
msgstr ""

#: solvespace.cpp:601
#, c-format
msgctxt "dialog"
msgid "Do you want to save the changes you made to the sketch “%s”?"
msgstr ""

#: solvespace.cpp:604
msgctxt "dialog"
msgid "Do you want to save the changes you made to the new sketch?"
msgstr ""

#: solvespace.cpp:607
msgctxt "dialog"
msgid "Your changes will be lost if you don't save them."
msgstr ""

#: solvespace.cpp:608
msgctxt "button"
msgid "&Save"
msgstr ""

#: solvespace.cpp:610
msgctxt "button"
msgid "Do&n't Save"
msgstr ""

#: solvespace.cpp:631
msgctxt "title"
msgid "(new sketch)"
msgstr ""

#: solvespace.cpp:638
msgctxt "title"
msgid "Property Browser"
msgstr ""

#: solvespace.cpp:700
msgid ""
"Constraints are currently shown, and will be exported in the toolpath. This "
"is probably not what you want; hide them by clicking the link at the top of "
"the text window."
msgstr ""

#: solvespace.cpp:772
#, c-format
msgid ""
"Can't identify file type from file extension of filename '%s'; try .dxf or ."
"dwg."
msgstr ""

#: solvespace.cpp:824
msgid "Constraint must have a label, and must not be a reference dimension."
msgstr ""

#: solvespace.cpp:828
msgid "Bad selection for step dimension; select a constraint."
msgstr ""

#: solvespace.cpp:852
msgid "The assembly does not interfere, good."
msgstr ""

#: solvespace.cpp:868
#, c-format
msgid ""
"The volume of the solid model is:\n"
"\n"
"    %s"
msgstr ""

#: solvespace.cpp:877
#, c-format
msgid ""
"\n"
"The volume of current group mesh is:\n"
"\n"
"    %s"
msgstr ""

#: solvespace.cpp:882
msgid ""
"\n"
"\n"
"Curved surfaces have been approximated as triangles.\n"
"This introduces error, typically of around 1%."
msgstr ""

#: solvespace.cpp:897
#, c-format
msgid ""
"The surface area of the selected faces is:\n"
"\n"
"    %s\n"
"\n"
"Curves have been approximated as piecewise linear.\n"
"This introduces error, typically of around 1%%."
msgstr ""

#: solvespace.cpp:906
msgid ""
"This group does not contain a correctly-formed 2d closed area. It is open, "
"not coplanar, or self-intersecting."
msgstr ""

#: solvespace.cpp:918
#, c-format
msgid ""
"The area of the region sketched in this group is:\n"
"\n"
"    %s\n"
"\n"
"Curves have been approximated as piecewise linear.\n"
"This introduces error, typically of around 1%%."
msgstr ""

#: solvespace.cpp:938
#, c-format
msgid ""
"The total length of the selected entities is:\n"
"\n"
"    %s\n"
"\n"
"Curves have been approximated as piecewise linear.\n"
"This introduces error, typically of around 1%%."
msgstr ""

#: solvespace.cpp:944
msgid "Bad selection for perimeter; select line segments, arcs, and curves."
msgstr ""

#: solvespace.cpp:960
msgid "Bad selection for trace; select a single point."
msgstr ""

#: solvespace.cpp:987
#, c-format
msgid "Couldn't write to '%s'"
msgstr ""

#: solvespace.cpp:1017
msgid "The mesh is self-intersecting (NOT okay, invalid)."
msgstr ""

#: solvespace.cpp:1018
msgid "The mesh is not self-intersecting (okay, valid)."
msgstr ""

#: solvespace.cpp:1020
msgid "The mesh has naked edges (NOT okay, invalid)."
msgstr ""

#: solvespace.cpp:1021
msgid "The mesh is watertight (okay, valid)."
msgstr ""

#: solvespace.cpp:1024
#, c-format
msgid ""
"\n"
"\n"
"The model contains %d triangles, from %d surfaces."
msgstr ""

#: solvespace.cpp:1028
#, c-format
msgid ""
"%s\n"
"\n"
"%s\n"
"\n"
"Zero problematic edges, good.%s"
msgstr ""

#: solvespace.cpp:1031
#, c-format
msgid ""
"%s\n"
"\n"
"%s\n"
"\n"
"%d problematic edges, bad.%s"
msgstr ""

#: solvespace.cpp:1044
#, c-format
msgid ""
"This is SolveSpace version %s.\n"
"\n"
"For more information, see http://solvespace.com/\n"
"\n"
"SolveSpace is free software: you are free to modify\n"
"and/or redistribute it under the terms of the GNU\n"
"General Public License (GPL) version 3 or later.\n"
"\n"
"There is NO WARRANTY, to the extent permitted by\n"
"law. For details, visit http://gnu.org/licenses/\n"
"\n"
"© 2008-%d Jonathan Westhues and other authors.\n"
msgstr ""

#: style.cpp:185
msgid ""
"Can't assign style to an entity that's derived from another entity; try "
"assigning a style to this entity's parent."
msgstr "无法将样式分配给派生自其他实体的实体;尝试将样式分配给此实体的父级。"

#: style.cpp:735
msgid "Style name cannot be empty"
msgstr "样式名称不能为空"

#: textscreens.cpp:791
msgid "Can't repeat fewer than 1 time."
msgstr "不能重复少于 1 次。"

#: textscreens.cpp:795
msgid "Can't repeat more than 999 times."
msgstr "重复不超过 999 次。"

#: textscreens.cpp:820
msgid "Group name cannot be empty"
msgstr "组名称不能为空"

#: textscreens.cpp:872
msgid "Opacity must be between zero and one."
msgstr "不透明度必须在零和 1 之间。"

#: textscreens.cpp:907
msgid "Radius cannot be zero or negative."
msgstr "半径偏移不能为负数。"

#: toolbar.cpp:18
msgid "Sketch line segment"
msgstr "草图线段"

#: toolbar.cpp:20
msgid "Sketch rectangle"
msgstr "草图矩形"

#: toolbar.cpp:22
msgid "Sketch circle"
msgstr "草图圆"

#: toolbar.cpp:24
msgid "Sketch arc of a circle"
msgstr "圆的草图弧线"

#: toolbar.cpp:26
msgid "Sketch curves from text in a TrueType font"
msgstr "从 TrueType 字体中的文本中绘制草图曲线"

#: toolbar.cpp:28
msgid "Sketch image from a file"
msgstr "从文件中绘制图像"

#: toolbar.cpp:30
msgid "Create tangent arc at selected point"
msgstr "在选定点创建切线弧"

#: toolbar.cpp:32
msgid "Sketch cubic Bezier spline"
msgstr "草图立方贝塞尔样条"

#: toolbar.cpp:34
msgid "Sketch datum point"
msgstr "草图基准点"

#: toolbar.cpp:36
msgid "Toggle construction"
msgstr "切换结构"

#: toolbar.cpp:38
msgid "Split lines / curves where they intersect"
msgstr "相交的分割线/曲线"

#: toolbar.cpp:42
msgid "Constrain distance / diameter / length"
msgstr "约束距离/直径/长度"

#: toolbar.cpp:44
msgid "Constrain angle"
msgstr "约束角度"

#: toolbar.cpp:46
msgid "Constrain to be horizontal"
msgstr "约束为水平"

#: toolbar.cpp:48
msgid "Constrain to be vertical"
msgstr "约束为垂直"

#: toolbar.cpp:50
msgid "Constrain to be parallel or tangent"
msgstr "约束为平行或切线"

#: toolbar.cpp:52
msgid "Constrain to be perpendicular"
msgstr "约束至垂直"

#: toolbar.cpp:54
msgid "Constrain point on line / curve / plane / point"
msgstr "约束点至线/曲线/平面/点"

#: toolbar.cpp:56
msgid "Constrain symmetric"
msgstr "对称约束"

#: toolbar.cpp:58
msgid "Constrain equal length / radius / angle"
msgstr "约束长/半径/角度相等"

#: toolbar.cpp:60
msgid "Constrain normals in same orientation"
msgstr "约束法线在同原点"

#: toolbar.cpp:62
msgid "Other supplementary angle"
msgstr "其它补充角度"

#: toolbar.cpp:64
msgid "Toggle reference dimension"
msgstr "切换参考标注"

#: toolbar.cpp:68
msgid "New group extruding active sketch"
msgstr "新组中挤出当前草图"

#: toolbar.cpp:70
msgid "New group rotating active sketch"
msgstr "新组中旋转体当前草图"

#: toolbar.cpp:72
msgid "New group helix from active sketch"
msgstr ""

#: toolbar.cpp:74
msgid "New group revolve active sketch"
msgstr ""

#: toolbar.cpp:76
msgid "New group step and repeat rotating"
msgstr "新组中逐步重复旋转体"

#: toolbar.cpp:78
msgid "New group step and repeat translating"
msgstr "新组中逐步重复移动体"

#: toolbar.cpp:80
msgid "New group in new workplane (thru given entities)"
msgstr "在新工作平面创建组(通过指定对象）"

#: toolbar.cpp:82
msgid "New group in 3d"
msgstr "在3D中新建组"

#: toolbar.cpp:84
msgid "New group linking / assembling file"
msgstr "新组 连接/装配文件"

#: toolbar.cpp:88
msgid "Nearest isometric view"
msgstr "ISO视图"

#: toolbar.cpp:90
msgid "Align view to active workplane"
msgstr "切换视图至当前工作面"

#: util.cpp:165
msgctxt "title"
msgid "Error"
msgstr "错误"

#: util.cpp:165
msgctxt "title"
msgid "Message"
msgstr "消息"

#: util.cpp:170
msgctxt "button"
msgid "&OK"
msgstr "&OK"

#: view.cpp:127
msgid "Scale cannot be zero or negative."
msgstr "缩放不能为零。"

#: view.cpp:139 view.cpp:148
msgid "Bad format: specify x, y, z"
msgstr "格式错误: 需指定 x, y, z"

#~ msgid ""
#~ "Bad selection for length ratio constraint. This constraint can apply to:\n"
#~ "\n"
#~ "    * two line segments\n"
#~ msgstr ""
#~ "长度比率约束的选择错误。此约束可应用于：\n"
#~ "\n"
#~ "* 两个线段\n"

#~ msgid ""
#~ "Bad selection for length difference constraint. This constraint can apply "
#~ "to:\n"
#~ "\n"
#~ "    * two line segments\n"
#~ msgstr ""
#~ "长度差异约束的选择错误。此约束可应用于：\n"
#~ "\n"
#~ "* 两个线段\n"

#~ msgid "Length Ra&tio"
#~ msgstr "长度比例(&T)"

#~ msgid "Length Diff&erence"
#~ msgstr "长度偏差(&E)"

#~ msgid ""
#~ "Bad selection for new sketch in workplane. This group can be created "
#~ "with:\n"
#~ "\n"
#~ "    * a point (through the point, orthogonal to coordinate axes)\n"
#~ "    * a point and two line segments (through the point, parallel to the "
#~ "lines)\n"
#~ "    * a workplane (copy of the workplane)\n"
#~ msgstr ""
#~ "在新工作面内绘图选择失败，该组可以使用：\n"
#~ "\n"
#~ "    * 一个点（通过该点，正交至坐标轴）\n"
#~ "   * 一个点和二个线段（通过点，绘制平行线至线段）\n"
#~ "   * 一个工作面（复制工作面）\n"

#~ msgctxt "file-type"
#~ msgid "Q3D Object file"
#~ msgstr "Q3D对象文件"
