System::Command(3)

NAME
System::Command - Object for running system commands

VERSION
version 1.122

SYNOPSIS
    use System::Command;

    # invoke an external command, and return an object
    $cmd = System::Command->new( @cmd );

    # options can be passed as a hashref
    $cmd = System::Command->new( @cmd, \%option );

    # $cmd is basically a hash, with keys / accessors
    $cmd->stdin();     # filehandle to the process stdin (write)
    $cmd->stdout();    # filehandle to the process stdout (read)
    $cmd->stderr();    # filehandle to the process stdout (read)
    $cmd->pid();       # pid of the child process

    # find out if the child process died
    if ( $cmd->is_terminated() ) {
        # the handles are not closed yet
        # but $cmd->exit() et al. are available if it's dead
    }

    # done!
    $cmd->close();

    # exit information
    $cmd->exit();      # exit status
    $cmd->signal();    # signal
    $cmd->core();      # core dumped? (boolean)

    # cut to the chase
    my ( $pid, $in, $out, $err ) = System::Command->spawn(@cmd);

DESCRIPTION
System::Command is a class that launches external system commands and return an object representing them, allowing to interact with them through their "STDIN", "STDOUT" and "STDERR" handles.

METHODS
System::Command supports the following methods:

  new
    my $cmd = System::Command->new( @cmd )

Runs an external command using the list in @cmd.

If @cmd contains a hash reference, it is taken as an option hash.

If several option hashes are passed to new(), they will be merged together with individual values being overridden by those (with the same key) from hashes that appear later in the list.

To allow subclasses to support their own set of options, unrecognized options are silently ignored.

The recognized keys are:

"cwd"
    The current working directory in which the command will be run.

"env"
    A hashref containing key / values to add to the command environment.

    If several option hashes define the "env" key, the hashes they point to will be merged into one (instead of the last one taking precedence).

    If a value is "undef", the variable corresponding to the key will be removed from the environment.

"input"
    A string that is send to the command's standard input, which is then closed.

    Using the empty string as "input" will close the command's standard input without writing to it.

    Using "undef" as "input" will not do anything. This behaviour provides a way to modify previous options populated by some other part of the program.

    On some systems, some commands may close standard input on startup, which will cause a SIGPIPE when trying to write to it. This will raise an exception.

"interactive"
    If true, the command will actually be run using the "system" in perlfunc builtin. If "STDIN" is not a terminal, the constructor will die.

    Not reaper object will be created, and the "stdin", "stdout" and "stderr" filehandles will point to dummy closed handles. The "exit", "signal" and "core" attributes will be correctly set.

    (Added in version 1.114.)

"setpgrp"
    By default, the spawned process is made the leader of its own process group using "setpgrp( 0, 0 )" (if possible). This enables sending a signal to the command and all its child processes at once:

        # negative signal is sent to the process group
        kill -SIGKILL, $cmd->pid;

    Setting the "setpgrp" option to a false value disables this behaviour.

    (Added in version 1.110.)

"trace"
    The "trace" option defines the trace settings for System::Command. The "SYSTEM_COMMAND_TRACE" environment variable can be used to specify a global trace setting at startup. The environment variable overrides individual "trace" options.

    If "trace" or "SYSTEM_COMMAND_TRACE" contains an "=" character then what follows it is used as the name of the file to append the trace to. When using the "trace" option, it is recommended to use an absolute path for the trace file, in case the main program chdir() before calling System::Command.

    At trace level 1, only the command line is shown:

        System::Command cmd[12834]: /usr/bin/git commit -m "Test option hash in new()"

    Note: Command-line parameters containing whitespace will be properly quoted.

    At trace level 2, the options values are shown:

        System::Command opt[12834]: cwd => "/tmp/kHkPUBIVWd"
        System::Command opt[12834]: fatal => {128 => 1,129 => 1}
        System::Command opt[12834]: git => "/usr/bin/git"

    Note: The "fatal" and "git" options in the example above are actually used by Git::Repository to determine the command to be run, and ignored by System::Command. References are dumped using Data::Dumper.

    At trace level 3, the content of the "env" option is also listed:

        System::Command env[12834]: GIT_AUTHOR_EMAIL => "author\@example.com"
        System::Command env[12834]: GIT_AUTHOR_NAME => "Example author"

    If the command cannot be spawned, the trace will show "!" instead of the pid:

        System::Command cmd[!]: does-not-exist

    (Added in version 1.108.)

exit
core
signal
    The above three options can be set to point to a reference to a scalar, which will be automatically updated when the command is terminated. See the "Accessors" section for details about what the attributes of the same name mean.

    (Added in version 1.114.)

The System::Command object returned by new() has a number of attributes defined (see below).

  close
    $cmd->close;

Close all pipes to the child process, collects exit status, etc. and defines a number of attributes (see below).

Returns the invocant, so one can do things like:

    my $exit = $cmd->close->exit;

  is_terminated
    if ( $cmd->is_terminated ) {...}

Returns a true value if the underlying process was terminated.

If the process was indeed terminated, collects exit status, etc. and defines the same attributes as close(), but does not close all pipes to the child process.

  spawn
    my ( $pid, $in, $out, $err ) = System::Command->spawn(@cmd);

This shortcut method calls new() (and so accepts options in the same manner) and directly returns the "pid", "stdin", "stdout" and "stderr" attributes, in that order.

(Added in version 1.01.)

  loop_on
    $cmd->loop_on(
        stdout => sub { ... },
        stderr => sub { ... },
    );

This method calls the corresponding code references with each line produced on the standard output and errput of the command.

If the "stdout" or "stderr" argument is not given, the default is to silently drop the data for "stdout", and to pass through (to STDERR) the data for "stderr". To prevent any processing, pass a false value to the parameter.

For example, the following line will silently run the command to completion:

    $cmd->loop_on( stderr => '' );

The method blocks until the command is completed (or rather, until its output and errput handles have been closed), or until one of the callbacks returns a false value.

Data is read using readline, which depends on $/ for its definition of a "line". To that effect, the method takes a third optional argument, "input_record_separator", which sets the value for $/ for the duration of the call.

Caveat Emptor: since "loop_on" is line-based, it may block if either output or errput sends incomplete lines (e.g. if the command is some sort of interactive shell with a prompt).

The return value is true if the command exited with status 0, and false otherwise (i.e. the Unix traditional definition of success).

(Added in version 1.117.)

  Accessors
The attributes of a System::Command object are also accessible through a number of accessors.

The object returned by new() will have the following attributes defined:

cmdline
    Return the command-line actually executed, as a list of strings.

options
    The merged list of options used to run the command.

pid The PID of the underlying command.

stdin
    A filehandle opened in write mode to the child process' standard input.

stdout
    A filehandle opened in read mode to the child process' standard output.

stderr
    A filehandle opened in read mode to the child process' standard error output.

Regarding the handles to the child process, note that in the following code:

    my $fh = System::Command->new( @cmd )->stdout;

$fh is opened and points to the output handle of the child process, while the anonymous System::Command object has been destroyed. Once $fh is destroyed, the subprocess will be reaped, thus avoiding zombies. (System::Command::Reaper undertakes this process.)

After the call to close() or after is_terminated() returns true, the following attributes will be defined (note that the accessors always run is_terminated(), to improve their chance of getting a value if the process just finished):

exit
    The exit status of the underlying command.

signal
    The signal, if any, that killed the command.

core
    A boolean value indicating if the command dumped core.

Even when not having a reference to the System::Command object any more, it's still possible to get the "exit", "core" or "signal" values, using the options of the same name:

    my $fh = System::Command->new( @cmd, { exit => \my $exit } )->stdout;

Once the command is terminated, the $exit variable will contain the value that would have been returned by the exit() method.

CAVEAT EMPTOR
Note that System::Command uses waitpid() to catch the status information of the child processes it starts. This means that if your code (or any module you "use") does something like the following:

    local $SIG{CHLD} = 'IGNORE';    # reap child processes

System::Command will not be able to capture the "exit", "signal" and "core" attributes. It will instead set all of them to the impossible value -1, and display the warning "Child process already reaped, check for a SIGCHLD handler".

To silence this warning (and accept the impossible status information), load System::Command with:

    use System::Command -quiet;

It is also possible to more finely control the warning by setting the $System::Command::QUIET variable (the warning is not emitted if the variable is set to a true value).

If the subprocess started by System::Command has a short life expectancy, and no other child process is expected to die during that time, you could even disable the handler locally (use at your own risks):

    {
        local $SIG{CHLD};
        my $cmd = System::Command->new(@cmd);
        ...
    }

AUTHOR
Philippe Bruhat (BooK), "<book at cpan.org>"

ACKNOWLEDGEMENTS
Thanks to Alexis Sukrieh (SUKRIA) who, when he saw the description of Git::Repository::Command during my talk at OSDC.fr 2010, asked why it was not an independent module. This module was started by taking out of Git::Repository::Command 1.08 the parts that weren't related to Git.

Thanks to Christian Walde (MITHALDU) for his help in making this module work better under Win32.

The System::Command::Reaper class was added after the addition of Git::Repository::Command::Reaper in Git::Repository::Command 1.11. It was later removed from System::Command version 1.03, and brought back from the dead to deal with the zombie apocalypse in version 1.106. The idea of a reaper class comes from Vincent Pit.

Thanks to Tim Bunce for using Git::Repository and making many suggestions based on his use and needs. Most of them turned into improvement for System::Command instead, once we figured out that the more general feature idea really belonged there.

BUGS
Please report any bugs or feature requests to "bug-system-command at rt.cpan.org", or through the web interface at <http://rt.cpan.org/NoAuth/ReportBug.html?Queue=System-Command>. I will be notified, and then you'll automatically be notified of progress on your bug as I make changes.

SUPPORT
You can find documentation for this module with the perldoc command.

    perldoc System::Command

You can also look for information at:

•   RT: CPAN's request tracker

    <http://rt.cpan.org/NoAuth/Bugs.html?Dist=System-Command>

•   AnnoCPAN: Annotated CPAN documentation

    <http://annocpan.org/dist/System-Command>

•   CPAN Ratings

    <http://cpanratings.perl.org/d/System-Command>

•   Search CPAN

    <http://search.cpan.org/dist/System-Command/>

COPYRIGHT
Copyright 2010-2016 Philippe Bruhat (BooK).

LICENSE
This program is free software; you can redistribute it and/or modify it under the terms of either: the GNU General Public License as published by the Free Software Foundation; or the Artistic License.

See <http://dev.perl.org/licenses/> for more information.