# NOTE: This module originally came from SOAP::Lite, which you probably
# don't have. It was first repackaged here just to avoid the huge 
# dependancy tree, but this version has several features (CDATA
# support, better PI and Comment support) that have been added.

#
# Copyright (C) 2000-2007 Paul Kulchenko (paulclinger@yahoo.com)
# Copyright (C) 2008 Martin Kutter (martin.kutter@fen-net.de)
# Copyright (C) 2009-2011 Cal Henderson (cal@iamcal.com)
#
# SOAP::Lite is free software; you can redistribute it
# and/or modify it under the same terms as Perl itself.
#

package XML::Parser::LiteCopy;

use strict;
use vars qw($VERSION);
$VERSION = '0.720.00';

my $ReturnErrors = 0;

sub new {
    my $class = shift;

    return $class if ref $class;
    my $self = bless {} => $class;

    my %parameters = @_;
    $self->setHandlers(); # clear first
    $self->setHandlers(%{$parameters{Handlers} || {}});

    $ReturnErrors = $parameters{ReturnErrors} || 0;

    return $self;
}

sub setHandlers {
    my $self = shift;

    # allow symbolic refs, avoid "subroutine redefined" warnings
    no strict 'refs'; local $^W;
    # clear all handlers if called without parameters
    if (not @_) {
        for (qw(Start End Char Final Init CData Comment Doctype PI Error)) {
            *$_ = sub {}
        }
    }

    # we could use each here, too...
    while (@_) {
        my($name, $func) = splice(@_, 0, 2);
        *$name = defined $func
            ? $func
            : sub {}
    }
    return $self;
}

sub _regexp {
    my $patch = shift || '';
    my $package = __PACKAGE__;

    # This parser is based on "shallow parser" http://www.cs.sfu.ca/~cameron/REX.html

    # Robert D. Cameron "REX: XML Shallow Parsing with Regular Expressions",
    # Technical Report TR 1998-17, School of Computing Science, Simon Fraser University, November, 1998.
    # Copyright (c) 1998, Robert D. Cameron.
    # The following code may be freely used and distributed provided that
    # this copyright and citation notice remains intact and that modifications
    # or additions are clearly identified.

    use re 'eval';
    my $TextSE = "[^<]+";

    # the following backrefs have been added:
    # 1 : TextSE
    # 2 : MarkupSPE / DeclCE / CommentCE
    # 3 : MarkupSPE / DeclCE / CDATA_CE
    # 4 : MarkupSPE / DeclCE / DocTypeCE
    # 5 : MarkupSPE / PI_CE
    # 6 : MarkupSPE / EndTagCE
    # 7+: MarkupSPE / ElemTagCE

    my $Until2Hyphens = "(?:[^-]*)-(?:[^-]+-)*-";
    my $CommentCE = "($Until2Hyphens)(?{${package}::comment(\$2)})>?";

    my $UntilRSBs = "[^\\]]*](?:[^\\]]+])*]+";
    my $CDATA_CE = "($UntilRSBs(?:[^\\]>]$UntilRSBs)*)(?{${package}::cdata(\$3)})>";

    my $S = "[ \\n\\t\\r]+";
    my $NameStrt = "[A-Za-z_:]|[^\\x00-\\x7F]";
    my $NameChar = "[A-Za-z0-9_:.-]|[^\\x00-\\x7F]";
    my $Name = "(?:$NameStrt)(?:$NameChar)*";
    my $QuoteSE = "\"[^\"]*\"|'[^']*'";
    my $DT_IdentSE = "$Name(?:$S(?:$Name|$QuoteSE))*";
    my $MarkupDeclCE = "(?:[^\\]\"'><]+|$QuoteSE)*>";
    my $S1 = "[\\n\\r\\t ]";
    my $UntilQMs = "[^?]*\\?+";

    my $PI_Tail = "\\?|$S1$UntilQMs(?:[^>?]$UntilQMs)*";
    my $DT_ItemSE = "<(?:!(?:--$Until2Hyphens>|[^-]$MarkupDeclCE)|\\?$Name(?:$PI_Tail>))|%$Name;|$S";
    my $DocTypeCE = "$S($DT_IdentSE(?:$S)?(?:\\[(?:$DT_ItemSE)*](?:$S)?)?)>(?{${package}::_doctype(\$4)})";

    my $DeclCE = "--(?:$CommentCE)?|\\[CDATA\\[(?:$CDATA_CE)?|DOCTYPE(?:$DocTypeCE)?";

    my $PI_CE = "($Name(?:$PI_Tail))>(?{${package}::_pi(\$5); undef})";

    # these expressions were modified for backtracking and events

    my $EndTagCE = "($Name)(?{${package}::_end(\$6); undef})(?:$S)?>";
    my $AttValSE = "\"([^<\"]*)\"|'([^<']*)'";

    my $ElemTagCE = "($Name)"
        . "(?:$S($Name)(?:$S)?=(?:$S)?(?:$AttValSE)"
        . "(?{[\@{\$^R||[]},\$8=>defined\$9?\$9:\$10]}))*(?:$S)?(/)?>"
        . "(?{${package}::_start(\$7,\@{\$^R||[]}),\$^R=[]})(?{\$11 and ${package}::_end(\$7); undef})";

    my $MarkupSPE = "<(?:!(?:$DeclCE)?|\\?(?:$PI_CE)?|/(?:$EndTagCE)?|(?:$ElemTagCE)?)";

    # Next expression is under "black magic".
    # Ideally it should be '($TextSE)(?{${package}::char(\$1)})|$MarkupSPE',
    # but it doesn't work under Perl 5.005 and only magic with
    # (?:....)?? solved the problem.
    # I would appreciate if someone let me know what is the right thing to do
    # and what's the reason for all this magic.
    # Seems like a problem related to (?:....)? rather than to ?{} feature.
    # Tests are in t/31-xmlparserlite.t if you decide to play with it.
    #"(?{[]})(?:($TextSE)(?{${package}::_char(\$1)}))$patch|$MarkupSPE";
    "(?:($TextSE)(?{${package}::_char(\$1)}))$patch|$MarkupSPE";
}

setHandlers();

# Try 5.6 and 5.10 regex first
my $REGEXP = _regexp('??');

sub _parse_re {
    use re "eval";
    undef $^R;
    1 while $_[0] =~ m{$REGEXP}go
};

# fixup regex if it does not work...
{
    if (not eval { _parse_re('<soap:foo xmlns:soap="foo">bar</soap:foo>'); 1; } ) {
        $REGEXP = _regexp();
        local $^W;
        *_parse_re = sub {
                use re "eval";
                undef $^R;
                1 while $_[0] =~ m{$REGEXP}go
            };
    }
}

sub parse {
    _init();
    _parse_re($_[1]);
    _final();
}

my(@stack, $level);

sub _init {
    @stack = ();
    $level = 0;
    Init(__PACKAGE__, @_);
}

sub _final {
    return _error("not properly closed tag '$stack[-1]'") if @stack;
    return _error("no element found") unless $level;
    Final(__PACKAGE__, @_)
}

sub _start {
    return _error("multiple roots, wrong element '$_[0]'") if $level++ && !@stack;
    push(@stack, $_[0]);
    Start(__PACKAGE__, @_);
}

sub _char {
    Char(__PACKAGE__, $_[0]), return if @stack;

    # check for junk before or after element
    # can't use split or regexp due to limitations in ?{} implementation,
    # will iterate with loop, but we'll do it no more than two times, so
    # it shouldn't affect performance
    for (my $i=0; $i < length $_[0]; $i++) {
        return _error("junk '$_[0]' @{[$level ? 'after' : 'before']} XML element")
        if index("\n\r\t ", substr($_[0],$i,1)) < 0; # or should '< $[' be there
    }
}

sub _end {
    return _error("unexpected closing tag '$_[0]'") if !@stack;
    pop(@stack) eq $_[0] or return _error("mismatched tag '$_[0]'");
    End(__PACKAGE__, $_[0]);
}

sub comment {
    Comment(__PACKAGE__, substr $_[0], 0, -2);
}

sub end {
     pop(@stack) eq $_[0] or return _error("mismatched tag '$_[0]'");
     End(__PACKAGE__, $_[0]);
}

sub cdata {
    return _error("CDATA outside of tag stack") unless @stack;
    CData(__PACKAGE__, substr $_[0], 0, -2);
}

sub _doctype {
    Doctype(__PACKAGE__, $_[0]);
}

sub _pi {
    PI(__PACKAGE__, substr $_[0], 0, -1);
}

sub _error {
    if ($ReturnErrors){
      Error(__PACKAGE__, $_[0]);
      return;
    }
    die "$_[0]\n";
}

# ======================================================================
1;

__END__

=head1 NAME

XML::Parser::LiteCopy - Lightweight regexp-based XML parser

=head1 SYNOPSIS

  use XML::Parser::LiteCopy;

  $p1 = new XML::Parser::LiteCopy;
  $p1->setHandlers(
    Start => sub { shift; print "start: @_\n" },
    Char => sub { shift; print "char: @_\n" },
    End => sub { shift; print "end: @_\n" },
  );
  $p1->parse('<foo id="me">Hello World!</foo>');

  $p2 = new XML::Parser::LiteCopy
    Handlers => {
      Start => sub { shift; print "start: @_\n" },
      Char => sub { shift; print "char: @_\n" },
      End => sub { shift; print "end: @_\n" },
    }
  ;
  $p2->parse('<foo id="me">Hello <bar>cruel</bar> World!</foo>');

=head1 DESCRIPTION

This Perl implements an XML parser with a interface similar to
XML::Parser. Though not all callbacks are supported, you should be able to
use it in the same way you use XML::Parser. Due to using experimantal regexp
features it'll work only on Perl 5.6 and above and may behave differently on
different platforms.

Note that you cannot use regular expressions or split in callbacks. This is
due to a limitation of perl's regular expression implementation (which is
not re-entrant).

=head1 SUBROUTINES/METHODS

=head2 new

Constructor.

As (almost) all SOAP::Lite constructors, new() returns the object called on
when called as object method. This means that the following effectifely is
a no-op if $obj is a object:

 $obj = $obj->new();

New accepts a single named parameter, C<Handlers> with a hash ref as value:

 my $parser = XML::Parser::Lite->new(
    Handlers => {
        Start => sub { shift; print "start: @_\n" },
        Char => sub { shift; print "char: @_\n" },
        End => sub { shift; print "end: @_\n" },
    }
 );

The handlers given will be passed to setHandlers.

=head2 setHandlers

Sets (or resets) the parsing handlers. Accepts a hash with the handler names
and handler code references as parameters. Passing C<undef> instead of a
code reference replaces the handler by a no-op.

The following handlers can be set:

 Init
 Start
 Char
 End
 Final
 CData
 Doctype
 Comment
 PI

All other handlers are ignored.

Calling setHandlers without parameters resets all handlers to no-ops.

=head2 parse

Parses the XML given. In contrast to L<XML::Parser|XML::Parser>'s parse
method, parse() only parses strings.

=head1 Handler methods

=head2 Init

Called before parsing starts. You should perform any necessary initializations
in Init.

=head2 Start

Called at the start of each XML node. See L<XML::Parser> for details.

=head2 Char

Called for each character sequence. May be called multiple times for the
characters contained in an XML node (even for every single character).
Your implementation has to make sure that it captures all characters.

=head2 End

Called at the end of each XML node. See L<XML::Parser> for details

=head2 Comment

See L<XML::Parser> for details

=head2 PI

See XMLDecl in L<XML::Parser> for details, but also includes other processing instructions

=head2 Doctype

See L<XML::Parser> for details

=head2 Final

Called at the end of the parsing process. You should perform any neccessary
cleanup here.

=head1 SEE ALSO

 XML::Parser

=head1 COPYRIGHT

Copyright (C) 2000-2007 Paul Kulchenko. All rights reserved.

Copyright (C) 2008 Martin Kutter. All rights reserved.

Copyright (C) 2009 Cal Henderson. All rights reserved.

This library is free software; you can redistribute it and/or modify
it under the same terms as Perl itself.

This parser is based on "shallow parser" http://www.cs.sfu.ca/~cameron/REX.html
Copyright (c) 1998, Robert D. Cameron.

=head1 AUTHOR

Paul Kulchenko (paulclinger@yahoo.com)

Martin Kutter (martin.kutter@fen-net.de)

Additional handlers supplied by Adam Leggett.

Further modifications by Cal Henderson.

=cut





