%% NOTICES AND ADMONITIONS
%
% change this info string if making any custom modification
\ProvidesPackage{sphinxlatexadmonitions}[2025/10/24 v9.0.0 admonitions]

% Provides support for this output mark-up from Sphinx latex writer:
%
% - sphinxseealso environment added at 6.1.0.
%
% - sphinxtodo environment added at 7.4.0.
%
% - sphinxadmonition (environment)
%   This is a dispatch which formerly configured
%
%   - note, hint, important, tip to use sphinxlightbox (or optionally
%     sphinxheavybox since 6.2.0),
%   - warning, caution, attention, danger, error to use sphinxheavybox.
%
%   Since 7.4.0 all admonitions use sphinxheavybox.
%
% - All environments sphinxnote, sphinxwarning, etc... can be redefined as
%   will by user. Thay have a single parameter #1 which is the title.
%
% - Also redefinable by user are the one-argument commands
%   * \sphinxstylenotetitle,
%   * \sphinxstylewarningtitle,
%   * etc.... one for each admonition type (also seealso and todo).
%
% - At 7.4.0, all commands of previous item use \sphinxdotitlerow.
%   (the 7.4.0 name, still usable, was \sphinxdotitlerowwithicon; the 8.1.0
%   version is also used for topic, contents and sidebar directives, see
%   sphinxlatexshadowbox.sty, and handles both "with icon" and "without
%   icon" situations).
%
% The sphinxlightbox environment is kept for backward compatibility, for user
% custom code which used it via custom definitions done in preamble or via
% raw latex directive.
% MEMO: here is for example how sphinxnote was formerly defined:
% (where #1 is the localized string Note, followed with  a colon)
%     \newenvironment{sphinxnote}[1]
%       {\begin{sphinxlightbox}\sphinxstrong{#1} }
%       {\end{sphinxlightbox}}
% Use this if you want to revert the 7.4.0 switch to usage of sphinxheavybox.
% (the 7.4.0 redefined \sphinxstylenotetitle will not work in sphinxlightbox,
%  so \sphinxstrong{#1}<space> which was its former default is used above).

% Dependencies (they do not need to be defined at time of loading):
%
% - of course the various colour and dimension options handled via sphinx.sty
% - dimension register \spx@image@maxheight from sphinxlatexgraphics.sty
% - \savenotes/\spewnotes from sphinxpackagefootnote.sty
% - \ifspx@inframed defined in sphinx.sty
% - \spx@boxes@fcolorbox@setup from sphinxpackageboxes.sty
%
\RequirePackage{framed}
\RequirePackage{needspace}
% Those are required either before or after by sphinx.sty anyhow, but for
% clarity we list them here:
\RequirePackage{sphinxlatexgraphics}
\RequirePackage{sphinxpackagefootnote}
\RequirePackage{sphinxpackageboxes}
%
% Provides: (also in sphinxlatexliterals.sty)
% Only needed here by legacy (deprecated) sphinxlightbox environment.
\providecommand*\sphinxvspacefixafterfrenchlists{%
   \ifvmode\ifdim\lastskip<\z@ \vskip\parskip\fi\else\par\fi
}

% This \dimen register is a legacy relic from Sphinx 1.5 which is used now
% only for sphinxlightbox.  It is set in the sphinxadmonition environment.
\newdimen\spx@notice@border
% sphinxlightbox is now also a legacy relic, not used by Sphinx anymore
\newenvironment{sphinxlightbox}{%
  \par
  \noindent{\color{spx@notice@bordercolor}%
            \rule{\linewidth}{\spx@notice@border}}%
  \par\nobreak
  {\parskip\z@skip\noindent}%
  }
  {%
  % counteract previous possible negative skip (French lists!):
  % (we can't cancel that any earlier \vskip introduced a potential pagebreak)
  \sphinxvspacefixafterfrenchlists
  \nobreak\vbox{\noindent\kern\@totalleftmargin
      {\color{spx@notice@bordercolor}%
       \rule[\dimexpr.4\baselineskip-\spx@notice@border\relax]
             {\linewidth}{\spx@notice@border}}\hss}\allowbreak
  }% end of sphinxlightbox environment definition

% Since 1.5 these environments are named individually sphinxnote, sphinxhint,
% etc... to allow user to redefine them entirely.
%
% The Sphinx definitions for note/hint/important/tip notices were done like
% this, prior to 6.2.0:
%
% \newenvironment{sphinxhint}[1]
%   {\begin{sphinxlightbox}\sphinxstrong{#1} }{\end{sphinxlightbox}}
%
% Then from 6.2.0 to 7.4.0 (exclusive) a more complex definition decided
% to use either sphinxlightbox or sphinxheavybox according to whether
% some CSS-like options had been used, for example for a background color.
%
% 6.2.0 also added one layer of mark-up via \sphinxnotetitle etc..., because
% the former \sphinxstrong{#1}<space> used a too generic \sphinxstrong.
%
% At 7.4.0, sphinxheavybox environment is default for all types of notices
% and also for the seealso and todo directives.
%
% Code adapted from framed.sty's "snugshade" environment.
% Nesting works (inner frames do not allow page breaks).
%
% At 9.0, avoid admonition title getting separated from contents at a
% page break.
\newcommand\sphinxheavyboxneedspacecommand{\needspace{5\baselineskip}}
\newenvironment{sphinxheavybox}{\par
   \sphinxheavyboxneedspacecommand
   % (MEMO: it is not a problem here if there is no sphinx<type>ShadowColor,
   %  as it used only if set)
   \spx@boxes@fcolorbox@setup{\spx@noticetype}%
   % Those are used by sphinxVerbatim if the \ifspx@inframed boolean is true
   \setlength{\FrameRule}{0.5\dimexpr\spx@boxes@border@top+\spx@boxes@border@bottom\relax}%
   % MEMO: prior to 5.1.0 \FrameSep was determined as 0.6\baselineskip -
   % \FrameRule, and there was no possibility for user to adjust padding.
   % Then \fcolorbox was used with \fboxrule set to \FrameRule and \fboxsep
   % set to \FrameSep.
   % The 5.1.0 default calculation of padding parameters maintains PDF output
   % identical to legacy behaviour, as long as padding is not set by user.
   \setlength{\FrameSep}{0.5\dimexpr\spx@boxes@padding@top+\spx@boxes@padding@bottom\relax}%
   % "setup" macro has prepared the \spx@boxes@... dimen registers
   \advance\spx@image@maxheight
   -\dimexpr\spx@boxes@border@top+\spx@boxes@border@bottom
           +\spx@boxes@padding@top+\spx@boxes@padding@bottom
           +\baselineskip\relax % will happen again if nested, needed indeed!
   % MEMO: the next comment is before boxing was extended to allow padding and
   % multiple border-widths, not to mention shadows...
   % configure framed.sty's parameters to obtain same vertical spacing
   % as for "light" boxes. We need for this to manually insert parskip glue and
   % revert a skip done by framed before the frame.
    \ltx@ifundefined{OuterFrameSep}{}{\OuterFrameSep\z@skip}%
    \vspace{\FrameHeightAdjust}
   % copied/adapted from framed.sty's snugshade
   % but now using in place of \fcolorbox the Sphinx sophisticated own
   \def\FrameCommand##1{%
       \hskip\@totalleftmargin
       % "setup" macro MUST have been called before
       \spx@boxes@fcolorbox{##1}%
       \hskip-\linewidth \hskip-\@totalleftmargin \hskip\columnwidth
   }%
   % 6.2.0 adds support for div.<notice type>_box-decoration-break=slice.
   % (it is yet undecided if slice style should inhibit a bottom shadow)
   \csname ifspx@\spx@noticetype @border@open\endcsname
     \def\FirstFrameCommand
               {\spx@boxes@fcolorbox@setup@openbottom\FrameCommand}%
     \def\MidFrameCommand
               {\spx@boxes@fcolorbox@setup@openboth  \FrameCommand}%
     \def\LastFrameCommand
               {\spx@boxes@fcolorbox@setup@opentop   \FrameCommand}%
   \fi
   \savenotes
   % use a minipage if we are already inside a framed environment
   \ifspx@inframed
       \noindent\begin{minipage}{\linewidth}
   \else
       % handle case where notice is first thing in a list item (or is quoted)
       \if@inlabel
        \noindent\par\vspace{-\baselineskip}
       \else
        \vspace{\parskip}
       \fi
   \fi
   \MakeFramed {\spx@inframedtrue
     \advance\hsize-\width \@totalleftmargin\z@ \linewidth\hsize
     % minipage initialization copied from LaTeX source code.
     \@pboxswfalse
     \let\@listdepth\@mplistdepth \@mplistdepth\z@
     \@minipagerestore
     \@setminipage }%
   \color@begingroup % workaround to an upstream framed.sty bug
   }
   {%
   \par\unskip
   \color@endgroup   % matches the \color@begingroup
   \@minipagefalse
   \endMakeFramed
   \ifspx@inframed\end{minipage}\fi
   % set footnotes at bottom of page
   \spewnotes
   % arrange for similar spacing below frame as for "light" boxes.
   \vskip .4\baselineskip
   }% end of sphinxheavybox environment definition

% - Since 1.5 these environments are named individually to allow user to
% redefine them entirely.
%
% - Since 5.1.0, sphinxheavybox is more versatile and four border widths, four
% padding widths, four corner radii, optional shadow, and three colors can all
% be modified via CSS-named alike options.
%
% - Since 6.2.0, also note/hint/important/tip notices can use these options
% and then they go automatically via sphinxheavybox.  If only the legacy options
% are used, they keep using sphinxlightbox.
%
% - Since 6.2.0, \sphinxwarningtitle etc... add one level of mark-up (they
% expand to \sphinxstrong{#1}<space> which was former hard-coded mark-up).
% Example:
% \renewcommand{\sphinxwarningtitle}[1]{\textbf{#1}\par\smallskip
%   {\color{sphinxwarningBorderColor}\hrule height1pt}\smallskip}
%
% - Since 7.4.0, all types of notices use sphinxheavybox and the default
% for \sphinxstyle<type>title is mapped to using \sphinxdotitlerowwithicon{<type>}
%
% MEMO: except for the generic admonition directive (which uses "note" type)
% the argument #1 in these environments has a postfixed colon originating
% in Sphinx LaTeX writer legacy code.  The
% \sphinxremovefinalcolon utility in sphinxlatexstyletext.sty can be used as
% \sphinxremovefinalcolon{#1} from inside the definitions of
% \sphinxstylenotetitle et al. commands.

% Important: even prior to 5.1.0 it was not really possible to use directly
% sphinxheavybox if not triggered from sphinxadmonition, because some
% parameters were defined in sphinxadmonition.  This meant that the
% sphinxwarning, sphinxcaution etc... environments (defined below) could not
% be used directly in a document, they had to be triggered via
% sphinxadmonition.  The sole data since 5.1.0 needed by sphinxheavybox is the
% type of the notice which sphinxadmonition stores into \spx@noticetype.
%
% In order to facilitate recycling or imitation of the sphinx<type>
% environments, 7.4.0 inserts an extra \def\spx@noticetype{<type>} in their
% definitions, so that they can be used independently of sphinxadmonition
% dispatcher.
%
% MEMO: direct usage of these environments does not execute the div.<type>_TeXextras
% and div.<type>_TexColor code, there are only done from the sphinxadmonition wrapper.
\newenvironment{sphinxnote}[1]
  {\def\spx@noticetype{note}\begin{sphinxheavybox}\sphinxstylenotetitle{#1}}
  {\end{sphinxheavybox}}
\newenvironment{sphinxhint}[1]
  {\def\spx@noticetype{hint}\begin{sphinxheavybox}\sphinxstylehinttitle{#1}}
  {\end{sphinxheavybox}}
\newenvironment{sphinxtip}[1]
  {\def\spx@noticetype{tip}\begin{sphinxheavybox}\sphinxstyletiptitle{#1}}
  {\end{sphinxheavybox}}
\newenvironment{sphinximportant}[1]
  {\def\spx@noticetype{important}\begin{sphinxheavybox}\sphinxstyleimportanttitle{#1}}
  {\end{sphinxheavybox}}
\newenvironment{sphinxwarning}[1]
  {\def\spx@noticetype{warning}\begin{sphinxheavybox}\sphinxstylewarningtitle{#1}}
  {\end{sphinxheavybox}}
\newenvironment{sphinxcaution}[1]
  {\def\spx@noticetype{caution}\begin{sphinxheavybox}\sphinxstylecautiontitle{#1}}
  {\end{sphinxheavybox}}
\newenvironment{sphinxattention}[1]
  {\def\spx@noticetype{attention}\begin{sphinxheavybox}\sphinxstyleattentiontitle{#1}}
  {\end{sphinxheavybox}}
\newenvironment{sphinxdanger}[1]
  {\def\spx@noticetype{danger}\begin{sphinxheavybox}\sphinxstyledangertitle{#1}}
  {\end{sphinxheavybox}}
\newenvironment{sphinxerror}[1]
  {\def\spx@noticetype{error}\begin{sphinxheavybox}\sphinxstyleerrortitle{#1}}
  {\end{sphinxheavybox}}
% The "see also" was quite plain until 7.4.0 as it simply did
% \newenvironment{sphinxseealso}[1]{\sphinxstyleseealsotitle{#1}}{}
% Here we need to manually insert execution of div.seealso_TeX{color,extras} values
\newenvironment{sphinxseealso}[1]
  {\def\spx@noticetype{seealso}%
   \begin{sphinxheavybox}\sphinxstyleseealsotitle{#1}%
   \ifspx@seealso@withtextcolor\color{sphinxseealsoTextColor}\fi
   \spx@seealso@TeXextras
  }
  {\end{sphinxheavybox}}
% There was no sphinxtodo environment until 7.4.0 because sphinx.ext.todo
% generated \begin{sphinxadmonition}{note}{Todo:} mark-up.
\newcounter{sphinxtodo}% to provide targets from todolist directive output
\newenvironment{sphinxtodo}[1]
  {\refstepcounter{sphinxtodo}\def\spx@noticetype{todo}%
   \begin{sphinxheavybox}\sphinxstyletodotitle{#1}%
   \ifspx@todo@withtextcolor\color{sphinxtodoTextColor}\fi
   \spx@todo@TeXextras
  }
  {\end{sphinxheavybox}}


% the main dispatch for all types of notices
\newenvironment{sphinxadmonition}[2]{% #1=type, #2=heading
  % can't use #1 directly in definition of end part
  \def\spx@noticetype {#1}%
  % those next three are a remnant of legacy code; they are not used at
  % all by sphinxheavybox, and their usage could be disposed of by sphinxlightbox
  % but we keep for backward compatibility and also because it may be simpler
  % for user redefinitions to employ for example "spx@notice@bgcolor" and not
  % the more bulky "sphinx\spx@noticetype BgColor".
  \sphinxcolorlet{spx@notice@bordercolor}{sphinx#1BorderColor}%
  \sphinxcolorlet{spx@notice@bgcolor}{sphinx#1BgColor}%
  % At 7.4.0 there are no \spx@<type>@boder macros anymore only top, left,
  % bottom, right.  For this legacy \spx@notice@border only needed by
  % sphinxlightbox (which is not used by own Sphinx environments anymore)
  % we thus use here @top
  \spx@notice@border \dimexpr\csname spx@#1@border@top\endcsname\relax
  % trigger the sphinx<type> environment, #2=heading is passed as argument
  \begin{sphinx#1}{#2}%
  % MEMO: the heading #2 will be typeset before the next lines are executed
  % 6.2.0 support of div.<type>_TeX{color,extras} options
  \csname ifspx@\spx@noticetype @withtextcolor\endcsname
         \color{sphinx\spx@noticetype TextColor}%
  \fi
  % Other code to be executed at start of contents (after title)
  \csname spx@\spx@noticetype @TeXextras\endcsname
  }
  % workaround some LaTeX "feature" of \end command (i.e. can't use "sphinx#1" here)
  {\edef\spx@temp{\noexpand\end{sphinx\spx@noticetype}}\spx@temp}

% TODO: allow these next three settings to be customized individually.
%       This can however already be done at user level by \renewcommand
%       inside renew'ed environments sphinxnote, sphinxhint etc...
\newcommand\sphinxtitlerowtoppadding{5pt}
\newcommand\sphinxtitlerowbottompadding{3pt}
\newcommand\sphinxtitlerowaftericonspacecmd{\hskip0.5em\relax}
% 7.4.0 used this longer name:
\newcommand\sphinxdotitlerowwithicon{\sphinxdotitlerow}
\newcommand\sphinxdotitlerow[2]{% #1=type, #2=heading (without final colon)
   \begingroup
     \kern-\spx@boxes@padding@top
     \parskip\z@skip % the \parskip business is a workaround to a vertical
                     % glue issue showing in LaTeX earlier than 2023-06-01
     \noindent
     \kern-\spx@boxes@padding@left % must have been configured by a prior
                                   % \spx@boxes@fcolorbox@setup{<type>}
     % inherit settings from the enclosing box and modify what is needed
     \spx@boxes@border@top    =\z@
     \spx@boxes@border@right  =\z@
     \spx@boxes@border@bottom =\z@
     \spx@boxes@border@left   =\z@
     \spx@boxes@radius@bottomright@x=\z@
     \spx@boxes@radius@bottomright@y=\z@
     \spx@boxes@radius@bottomleft@x=\z@
     \spx@boxes@radius@bottomleft@x=\z@
     \spx@boxes@padding@top   =\sphinxtitlerowtoppadding\relax
     \spx@boxes@padding@bottom=\sphinxtitlerowbottompadding\relax
     \spx@boxes@withshadowfalse
     \sphinxcolorlet{spx@boxes@backgroundcolor}{sphinx#1TtlBgColor}%
     \spx@boxes@fcolorbox{%
        \parbox[t]{\linewidth}{% 7.4.0 used \makebox, but wrapping of long titles
                               % is needed for generic admonition or topic box.
         \sphinxAtStartPar
         % 8.1.0 auto-drops extra space if no icon
         \sbox\z@{\@nameuse{sphinx#1TtlIcon}}%
         \ifdim\wd\z@>\z@
          \textcolor{sphinx#1TtlFgColor}{%
            \@nameuse{sphinx#1TtlIcon}%
            % The next macro is located here for legacy reasons of earlier
            % functioning of sphinx.sty now removed \spx@faIcon macro.
            % We leave it here now although it could be moved to after
            % the closing brace.
            \sphinxtitlerowaftericonspacecmd
          }%
         \fi
         \sphinxstrong{#2}%
         \strut
         \par
        }%
      }%
     \kern-\spx@boxes@padding@right
     \par
   \endgroup
   \vskip-\parskip
   \kern\spx@boxes@padding@top
}

% #1 holds the localized name of the notice, postfixed with a colon.
% \sphinxremovefinalcolon{#1} will typeset #1 without the colon.
% Legacy definitions (done in sphinxlatexstyletext.sty) were all using
% a boring plain \sphinxstrong{#1}, now we use a coloured title row.
\newcommand\sphinxstylenotetitle     [1]{\sphinxdotitlerow{note}{\sphinxremovefinalcolon{#1}}}
\newcommand\sphinxstylehinttitle     [1]{\sphinxdotitlerow{hint}{\sphinxremovefinalcolon{#1}}}
\newcommand\sphinxstyleimportanttitle[1]{\sphinxdotitlerow{important}{\sphinxremovefinalcolon{#1}}}
\newcommand\sphinxstyletiptitle      [1]{\sphinxdotitlerow{tip}{\sphinxremovefinalcolon{#1}}}
\newcommand\sphinxstylewarningtitle  [1]{\sphinxdotitlerow{warning}{\sphinxremovefinalcolon{#1}}}
\newcommand\sphinxstylecautiontitle  [1]{\sphinxdotitlerow{caution}{\sphinxremovefinalcolon{#1}}}
\newcommand\sphinxstyleattentiontitle[1]{\sphinxdotitlerow{attention}{\sphinxremovefinalcolon{#1}}}
\newcommand\sphinxstyledangertitle   [1]{\sphinxdotitlerow{danger}{\sphinxremovefinalcolon{#1}}}
\newcommand\sphinxstyleerrortitle    [1]{\sphinxdotitlerow{error}{\sphinxremovefinalcolon{#1}}}
\newcommand\sphinxstyleseealsotitle  [1]{\sphinxdotitlerow{seealso}{\sphinxremovefinalcolon{#1}}}
\newcommand\sphinxstyletodotitle     [1]{\sphinxdotitlerow{todo}{\sphinxremovefinalcolon{#1}}}
%
% A utility to remove a final colon.  Removing last token is not easy in
% LaTeX, and there are additional complications:
% - some languages will make the : "active" in document body,
% - the generic admonition ends up using "note", so for \sphinxnotetitle to
%   use it safely, the utility has to allow an input not having any final colon.
% - a bit far-fetched but maybe there is more than one colon inside the input
%   (possible from a generic admonition title).
% Hence the scary code.
\newcommand\sphinxremovefinalcolon[1]{% #1 is the "active" : TeX token
% Prior to 7.4.0 this was defined with \protected\def but we do not
% see what usefulness this could have.
\renewcommand\sphinxremovefinalcolon[1]{%
   % complications due to : possibly "active"
   \begingroup\ifnum\catcode`:=\active
                    \def\x####1#1\relax{####1}%
               \else\def\x####1:\relax{####1}\fi
   \expandafter\endgroup\x##1\relax
   % trick to let \x work also if input ##1 has no ending colon
   \@gobblefour#1\relax:\relax\relax\relax
   }%
}% end of wrapper to inject active :
\begingroup\catcode`:\active\expandafter\endgroup\sphinxremovefinalcolon:

\endinput
