GDataOAuth1Authorizer: GData Reference Manual

## GDataOAuth1Authorizer GDataOAuth1Authorizer — GData OAuth 1.0 authorization interface |

## Stability Level

Stable, unless otherwise indicated

## Functions

GDataOAuth1Authorizer * | gdata_oauth1_authorizer_new ()
GDataOAuth1Authorizer * | gdata_oauth1_authorizer_new_for_authorization_domains ()
gchar * | gdata_oauth1_authorizer_request_authentication_uri ()
void | gdata_oauth1_authorizer_request_authentication_uri_async ()
gchar * | gdata_oauth1_authorizer_request_authentication_uri_finish ()
gboolean | gdata_oauth1_authorizer_request_authorization ()
void | gdata_oauth1_authorizer_request_authorization_async ()
gboolean | gdata_oauth1_authorizer_request_authorization_finish ()
const gchar * | gdata_oauth1_authorizer_get_application_name ()
const gchar * | gdata_oauth1_authorizer_get_locale ()
void | gdata_oauth1_authorizer_set_locale ()
SoupURI * | gdata_oauth1_authorizer_get_proxy_uri ()
void | gdata_oauth1_authorizer_set_proxy_uri ()
GProxyResolver * | gdata_oauth1_authorizer_get_proxy_resolver ()
void | gdata_oauth1_authorizer_set_proxy_resolver ()
guint | gdata_oauth1_authorizer_get_timeout ()
void | gdata_oauth1_authorizer_set_timeout ()

## Properties

char * | application-name | Read / Write / Construct Only
char * | locale | Read / Write
GProxyResolver * | proxy-resolver | Read / Write
SoupURI * | proxy-uri | Read / Write
guint | timeout | Read / Write

## Types and Values

| GDataOAuth1Authorizer
| GDataOAuth1AuthorizerClass

## Object Hierarchy

        GObject
        ╰── GDataOAuth1Authorizer

## Implemented Interfaces

GDataOAuth1Authorizer implements GDataAuthorizer.

## Includes

    #include <gdata/gdata-oauth1-authorizer.h>

## Description

OAuth 1.0 has been deprecated since 2012, and OAuth 2.0 (GDataOAuth2Authorizer) should be used instead.

GDataOAuth1Authorizer provides an implementation of the GDataAuthorizer interface for authentication and authorization using the

OAuth 1.0 process,

which was preferred by Google until OAuth 2.0 was released — it is now preferred to use GDataOAuth2Authorizer.

OAuth 1.0 replaces the deprecated ClientLogin process. One of the main reasons for this is to allow two-factor authentication to be supported, by moving the authentication interface to a web page under Google's control.

The OAuth 1.0 process as implemented by Google follows the OAuth 1.0 protocol as specified by IETF in RFC 5849, with a few additions to support scopes (implemented in libgdata by GDataAuthorizationDomains), locales and custom domains. Briefly, the process is initiated by requesting an authenticated request token from the Google accounts service (using `gdata_oauth1_authorizer_request_authentication_uri()`), going to the authentication URI for the request token, authenticating and authorizing access to the desired scopes, then providing the verifier returned by Google to the Google accounts service again (using `gdata_oauth1_authorizer_request_authorization()`) to authorize the token. This results in an access token which is attached to all future requests to the online service.

While Google supports unregistered and registered modes for OAuth 1.0 authorization, it only supports unregistered mode for installed applications. Consequently, libgdata also only supports unregistered mode. For this purpose, the application name to be presented to the user on the authentication page at the URI returned by `gdata_oauth1_authorizer_request_authentication_uri()` can be specified when constructing the GDataOAuth1Authorizer.

As described, each authentication/authorization operation is in two parts: `gdata_oauth1_authorizer_request_authentication_uri()` and `gdata_oauth1_authorizer_request_authorization()`. GDataOAuth1Authorizer stores no state about ongoing authentication operations (i.e. ones which have successfully called `gdata_oauth1_authorizer_request_authentication_uri()`, but are yet to successfully call `gdata_oauth1_authorizer_request_authorization()`). Consequently, operations can be abandoned before calling `gdata_oauth1_authorizer_request_authorization()` without problems. The only state necessary between the calls is the request token and request token secret, as returned by `gdata_oauth1_authorizer_request_authentication_uri()` and taken as parameters to `gdata_oauth1_authorizer_request_authorization()`.

GDataOAuth1Authorizer natively supports authorization against multiple services in a single authorization request (unlike GDataClientLoginAuthorizer).

Each access token is long lived, so reauthorization is rarely necessary with GDataOAuth1Authorizer. Consequently, refreshing authorization using `gdata_authorizer_refresh_authorization()` is not supported by GDataOAuth1Authorizer, and will immediately return `FALSE` with no error set.

Example 7. Authenticating Asynchronously Using OAuth 1.0

    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17
    18
    19
    20
    21
    22
    23
    24
    25
    26
    27
    28
    29
    30
    31
    32
    33
    34
    35
    36
    37
    38
    39
    40
    41
    42
    43
    44
    45
    46
    47
    48
    49
    50
    51
    52
    53
    54
    55
    56
    57
    58
    59
    60
    61
    62
    63
    64
    65
    66
    67
    68
    69
    70
    71
    GDataSomeService *service;
    GDataOAuth1Authorizer *authorizer;

    /* Create an authorizer and authenticate and authorize the service we're using, asynchronously. */
    authorizer = gdata_oauth1_authorizer_new (_("My libgdata application"), GDATA_TYPE_SOME_SERVICE);
    gdata_oauth1_authorizer_request_authentication_uri_async (authorizer, cancellable,
                                                              (GAsyncReadyCallback) request_authentication_uri_cb, user_data);

    /* Create a service object and link it with the authorizer */
    service = gdata_some_service_new (GDATA_AUTHORIZER (authorizer));

    static void
    request_authentication_uri_cb (GDataOAuth1Authorizer *authorizer, GAsyncResult *async_result, gpointer user_data)
    {
    	gchar *authentication_uri, *token, *token_secret, *verifier;
    	GError *error = NULL;

    	authentication_uri = gdata_oauth1_authorizer_request_authentication_uri_finish (authorizer, async_result, &token, &token_secret,
    	                                                                                &error);

    	if (error != NULL) {
    		/* Notify the user of all errors except cancellation errors */
    		if (!g_error_matches (error, G_IO_ERROR, G_IO_ERROR_CANCELLED)) {
    			g_error ("Requesting a token failed: %s", error->message);
    		}

    		g_error_free (error);
    		goto finish;
    	}

    	/* (Present the page at the authentication URI to the user, either in an embedded or stand-alone web browser, and
    	 * ask them to grant access to the application and return the verifier Google gives them.) */
    	verifier = ask_user_for_verifier (authentication_uri);

    	gdata_oauth1_authorizer_request_authorization_async (authorizer, token, token_secret, verifier, cancellable,
    	                                                     (GAsyncReadyCallback) request_authorization_cb, user_data);

    finish:
    	g_free (verifier);
    	g_free (authentication_uri);
    	g_free (token);

    	/* Zero out the secret before freeing. */
    	if (token_secret != NULL) {
    		memset (token_secret, 0, strlen (token_secret));
    	}

    	g_free (token_secret);
    }

    static void
    request_authorization_cb (GDataOAuth1Authorizer *authorizer, GAsyncResult *async_result, gpointer user_data)
    {
    	GError *error = NULL;

    	if (gdata_oauth1_authorizer_request_authorization_finish (authorizer, async_result, &error) == FALSE) {
    		/* Notify the user of all errors except cancellation errors */
    		if (!g_error_matches (error, G_IO_ERROR, G_IO_ERROR_CANCELLED)) {
    			g_error ("Authorization failed: %s", error->message);
    		}

    		g_error_free (error);
    		return;
    	}

    	/* (The client is now authenticated and authorized against the service.
    	 * It can now proceed to execute queries on the service object which require the user to be authenticated.) */
    }

    g_object_unref (service);
    g_object_unref (authorizer);

## Functions

### gdata_oauth1_authorizer_new ()

    GDataOAuth1Authorizer *
    gdata_oauth1_authorizer_new (const gchar *application_name,
                                 GType service_type);

Creates a new GDataOAuth1Authorizer.

The GDataAuthorizationDomains for the given `service_type` (i.e. as returned by `gdata_service_get_authorization_domains()`) are the ones the user will be requested to authorize access to on the page at the URI returned by `gdata_oauth1_authorizer_request_authentication_uri()`.

The given `application_name` will set the value of “application-name” and will be displayed to the user on authentication pages returned by Google. If `NULL` is provided, the value of `g_get_application_name()` will be used as a fallback.

#### Parameters

application_name | a human-readable, translated application name to use on authentication pages, or `NULL`. | [allow-none]
service_type | the GType of a GDataService subclass which the GDataOAuth1Authorizer will be used with |

#### Returns

a new GDataOAuth1Authorizer; unref with `g_object_unref()`.

[transfer full]

Since: 0.9.0

### gdata_oauth1_authorizer_new_for_authorization_domains ()

    GDataOAuth1Authorizer *
    gdata_oauth1_authorizer_new_for_authorization_domains
                                   (const gchar *application_name,
                                    GList *authorization_domains);

Creates a new GDataOAuth1Authorizer. This function is intended to be used only when the default authorization domain list for a single GDataService, as used by `gdata_oauth1_authorizer_new()`, isn't suitable. For example, this could be because the GDataOAuth1Authorizer will be used with multiple GDataService subclasses, or because the client requires a specific set of authorization domains.

The specified GDataAuthorizationDomains are the ones the user will be requested to authorize access to on the page at the URI returned by `gdata_oauth1_authorizer_request_authentication_uri()`.

The given `application_name` will set the value of “application-name” and will be displayed to the user on authentication pages returned by Google. If `NULL` is provided, the value of `g_get_application_name()` will be used as a fallback.

#### Parameters

application_name | a human-readable, translated application name to use on authentication pages, or `NULL`. | [allow-none]
authorization_domains | a non-empty list of GDataAuthorizationDomains to be authorized against by the GDataOAuth1Authorizer. | [element-type GDataAuthorizationDomain][transfer none]

#### Returns

a new GDataOAuth1Authorizer; unref with `g_object_unref()`.

[transfer full]

Since: 0.9.0

### gdata_oauth1_authorizer_request_authentication_uri ()

    gchar *
    gdata_oauth1_authorizer_request_authentication_uri
                                   (GDataOAuth1Authorizer *self,
                                    gchar **token,
                                    gchar **token_secret,
                                    GCancellable *cancellable,
                                    GError **error);

Requests a fresh unauthenticated token from the Google accounts service and builds and returns the URI of an authentication page for that token. This should then be presented to the user (e.g. in an embedded or stand alone web browser). The authentication page will ask the user to log in using their Google account, then ask them to grant access to the GDataAuthorizationDomains passed to the constructor of the GDataOAuth1Authorizer. If the user grants access, they will be given a verifier, which can then be passed to `gdata_oauth1_authorizer_request_authorization()` (along with the `token` and `token_secret` values returned by this method) to authorize the token.

This method can fail if the server returns an error, but this is unlikely. If it does happen, a `GDATA_SERVICE_ERROR_PROTOCOL_ERROR` will be raised, `token` and `token_secret` will be set to `NULL` and `NULL` will be returned.

This method implements Section 2.1 and

Section 2.2 of the OAuth 1.0 protocol.

When freeing `token_secret` , it's advisable to set it to all zeros first, to reduce the chance of the sensitive token being recoverable from the free memory pool and (accidentally) leaked by a different part of the process. This can be achieved with the following code:

    1
    2
    3
    4
    if (token_secret != NULL) {
    	memset (token_secret, 0, strlen (token_secret));
    	g_free (token_secret);
    }

#### Parameters

self | a GDataOAuth1Authorizer |
token | return location for the temporary credentials token returned by the authentication service; free with `g_free()`. | [out callee-allocates]
token_secret | return location for the temporary credentials token secret returned by the authentication service; free with `g_free()`. | [out callee-allocates]
cancellable | optional GCancellable object, or `NULL`. | [allow-none]
error | a GError, or `NULL` |

#### Returns

the URI of an authentication page for the user to use; free with `g_free()`.

[transfer full]

Since: 0.9.0

### gdata_oauth1_authorizer_request_authentication_uri_async ()

    void
    gdata_oauth1_authorizer_request_authentication_uri_async
                                   (GDataOAuth1Authorizer *self,
                                    GCancellable *cancellable,
                                    GAsyncReadyCallback callback,
                                    gpointer user_data);

Requests a fresh unauthenticated token from the Google accounts service and builds and returns the URI of an authentication page for that token. `self` is reffed when this method is called, so can safely be unreffed after this method returns.

For more details, see `gdata_oauth1_authorizer_request_authentication_uri()`, which is the synchronous version of this method.

When the operation is finished, `callback` will be called. You can then call `gdata_oauth1_authorizer_request_authentication_uri_finish()` to get the results of the operation.

#### Parameters

self | a GDataOAuth1Authorizer |
cancellable | optional GCancellable object, or `NULL`. | [allow-none]
callback | a GAsyncReadyCallback to call when building the URI is finished |
user_data | data to pass to the `callback` function. | [closure]

Since: 0.9.0

### gdata_oauth1_authorizer_request_authentication_uri_finish ()

    gchar *
    gdata_oauth1_authorizer_request_authentication_uri_finish
                                   (GDataOAuth1Authorizer *self,
                                    GAsyncResult *async_result,
                                    gchar **token,
                                    gchar **token_secret,
                                    GError **error);

Finishes an asynchronous authentication URI building operation started with `gdata_oauth1_authorizer_request_authentication_uri_async()`.

This method can fail if the server has returned an error, but this is unlikely. If it does happen, a `GDATA_SERVICE_ERROR_PROTOCOL_ERROR` will be raised, `token` and `token_secret` will be set to `NULL` and `NULL` will be returned.

When freeing `token_secret` , it's advisable to set it to all zeros first, to reduce the chance of the sensitive token being recoverable from the free memory pool and (accidentally) leaked by a different part of the process. This can be achieved with the following code:

    1
    2
    3
    4
    if (token_secret != NULL) {
    	memset (token_secret, 0, strlen (token_secret));
    	g_free (token_secret);
    }

#### Parameters

self | a GDataOAuth1Authorizer |
async_result | a GAsyncResult |
token | return location for the temporary credentials token returned by the authentication service; free with `g_free()`. | [out callee-allocates]
token_secret | return location for the temporary credentials token secret returned by the authentication service; free with `g_free()`. | [out callee-allocates]
error | a GError, or `NULL` |

#### Returns

the URI of an authentication page for the user to use; free with `g_free()`.

[transfer full]

Since: 0.9.0

### gdata_oauth1_authorizer_request_authorization ()

    gboolean
    gdata_oauth1_authorizer_request_authorization
                                   (GDataOAuth1Authorizer *self,
                                    const gchar *token,
                                    const gchar *token_secret,
                                    const gchar *verifier,
                                    GCancellable *cancellable,
                                    GError **error);

Requests authorization of the given request `token` from the Google accounts service using the given `verifier` as entered by the user from the authentication page at the URI returned by `gdata_oauth1_authorizer_request_authentication_uri()`. `token` and `token_secret` must be the same values as were returned by `gdata_oauth1_authorizer_request_authentication_uri()` if it was successful.

If the verifier is valid (i.e. the user granted access to the application and the Google accounts service has no reason to distrust the client), `TRUE` will be returned and any operations performed from that point onwards on GDataServices using this GDataAuthorizer will be authorized.

If the user denies access to the application or the Google accounts service distrusts it, a bogus verifier could be returned. In this case, `FALSE` will be returned and a `GDATA_SERVICE_ERROR_FORBIDDEN` error will be raised.

Note that if the user denies access to the application, it may be the case that they have no verifier to enter. In this case, the client can simply not call this method. The GDataOAuth1Authorizer stores no state for authentication operations which have succeeded in calling `gdata_oauth1_authorizer_request_authentication_uri()` but not yet successfully called `gdata_oauth1_authorizer_request_authorization()`.

This method implements Section 2.3 of the

OAuth 1.0 protocol.

#### Parameters

self | a GDataOAuth1Authorizer |
token | the request token returned by `gdata_oauth1_authorizer_request_authentication_uri()` |
token_secret | the request token secret returned by `gdata_oauth1_authorizer_request_authentication_uri()` |
verifier | the verifier entered by the user from the authentication page |
cancellable | optional GCancellable object, or `NULL`. | [allow-none]
error | a GError, or `NULL` |

#### Returns

`TRUE` if authorization was successful, `FALSE` otherwise

Since: 0.9.0

### gdata_oauth1_authorizer_request_authorization_async ()

    void
    gdata_oauth1_authorizer_request_authorization_async
                                   (GDataOAuth1Authorizer *self,
                                    const gchar *token,
                                    const gchar *token_secret,
                                    const gchar *verifier,
                                    GCancellable *cancellable,
                                    GAsyncReadyCallback callback,
                                    gpointer user_data);

Requests authorization of the given request `token` from the Google accounts service using the given `verifier` as entered by the user. `self` , `token` , `token_secret` and `verifier` are reffed/copied when this method is called, so can safely be freed after this method returns.

For more details, see `gdata_oauth1_authorizer_request_authorization()`, which is the synchronous version of this method.

When the operation is finished, `callback` will be called. You can then call `gdata_oauth1_authorizer_request_authorization_finish()` to get the results of the operation.

#### Parameters

self | a GDataOAuth1Authorizer |
token | the request token returned by `gdata_oauth1_authorizer_request_authentication_uri()` |
token_secret | the request token secret returned by `gdata_oauth1_authorizer_request_authentication_uri()` |
verifier | the verifier entered by the user from the authentication page |
cancellable | an optional GCancellable, or `NULL`. | [allow-none]
callback | a GAsyncReadyCallback to call when authorization is finished |
user_data | data to pass to the `callback` function. | [closure]

Since: 0.9.0

### gdata_oauth1_authorizer_request_authorization_finish ()

    gboolean
    gdata_oauth1_authorizer_request_authorization_finish
                                   (GDataOAuth1Authorizer *self,
                                    GAsyncResult *async_result,
                                    GError **error);

Finishes an asynchronous authorization operation started with `gdata_oauth1_authorizer_request_authorization_async()`.

#### Parameters

self | a GDataOAuth1Authorizer |
async_result | a GAsyncResult |
error | a GError, or `NULL` |

#### Returns

`TRUE` if authorization was successful, `FALSE` otherwise

Since: 0.9.0

### gdata_oauth1_authorizer_get_application_name ()

    const gchar *
    gdata_oauth1_authorizer_get_application_name
                                   (GDataOAuth1Authorizer *self);

Returns the application name being used on the authentication page at the URI returned by `gdata_oauth1_authorizer_request_authentication_uri()`; i.e. the value of “application-name”.

#### Parameters

self | a GDataOAuth1Authorizer |

#### Returns

the application name, or `NULL` if one isn't set.

[allow-none]

Since: 0.9.0

### gdata_oauth1_authorizer_get_locale ()

    const gchar *
    gdata_oauth1_authorizer_get_locale (GDataOAuth1Authorizer *self);

Returns the locale currently being used for network requests, or `NULL` if the locale is the default.

#### Parameters

self | a GDataOAuth1Authorizer |

#### Returns

the current locale.

[allow-none]

Since: 0.9.0

### gdata_oauth1_authorizer_set_locale ()

    void
    gdata_oauth1_authorizer_set_locale (GDataOAuth1Authorizer *self,
                                        const gchar *locale);

Set the locale used for network requests to `locale` , given in standard Unix locale format. See “locale” for more details.

Note that while it's possible to change the locale after sending network requests (i.e. calling `gdata_oauth1_authorizer_request_authentication_uri()` for the first time), it is unsupported, as the server-side software may behave unexpectedly. The only supported use of this method is after creation of the authorizer, but before any network requests are made.

#### Parameters

self | a GDataOAuth1Authorizer |
locale | the new locale in Unix locale format, or `NULL` for the default locale. | [allow-none]

Since: 0.9.0

### gdata_oauth1_authorizer_get_proxy_uri ()

    SoupURI *
    gdata_oauth1_authorizer_get_proxy_uri (GDataOAuth1Authorizer *self);

`gdata_oauth1_authorizer_get_proxy_uri` has been deprecated since version 0.15.0 and should not be used in newly-written code.

Use `gdata_oauth1_authorizer_get_proxy_resolver()` instead, which gives more flexibility over the proxy used.

Gets the proxy URI on the GDataOAuth1Authorizer's SoupSession.

#### Parameters

self | a GDataOAuth1Authorizer |

#### Returns

the proxy URI, or `NULL`; free with `soup_uri_free()`.

[transfer full][allow-none]

Since: 0.9.0

### gdata_oauth1_authorizer_set_proxy_uri ()

    void
    gdata_oauth1_authorizer_set_proxy_uri (GDataOAuth1Authorizer *self,
                                           SoupURI *proxy_uri);

`gdata_oauth1_authorizer_set_proxy_uri` has been deprecated since version 0.15.0 and should not be used in newly-written code.

Use `gdata_oauth1_authorizer_set_proxy_resolver()` instead, which gives more flexibility over the proxy used.

Sets the proxy URI on the SoupSession used internally by the GDataOAuth1Authorizer. This forces all requests through the given proxy.

If `proxy_uri` is `NULL`, no proxy will be used.

#### Parameters

self | a GDataOAuth1Authorizer |
proxy_uri | the proxy URI, or `NULL`. | [allow-none]

Since: 0.9.0

### gdata_oauth1_authorizer_get_proxy_resolver ()

    GProxyResolver *
    gdata_oauth1_authorizer_get_proxy_resolver
                                   (GDataOAuth1Authorizer *self);

Gets the GProxyResolver on the GDataOAuth1Authorizer's SoupSession.

#### Parameters

self | a GDataOAuth1Authorizer |

#### Returns

a GProxyResolver, or `NULL`.

[transfer none][allow-none]

Since: 0.15.0

### gdata_oauth1_authorizer_set_proxy_resolver ()

    void
    gdata_oauth1_authorizer_set_proxy_resolver
                                   (GDataOAuth1Authorizer *self,
                                    GProxyResolver *proxy_resolver);

Sets the GProxyResolver on the SoupSession used internally by the given GDataOAuth1Authorizer.

Setting this will clear the “proxy-uri” property.

#### Parameters

self | a GDataOAuth1Authorizer |
proxy_resolver | a GProxyResolver, or `NULL`. | [allow-none]

Since: 0.15.0

### gdata_oauth1_authorizer_get_timeout ()

    guint
    gdata_oauth1_authorizer_get_timeout (GDataOAuth1Authorizer *self);

Gets the “timeout” property; the network timeout, in seconds.

#### Parameters

self | a GDataOAuth1Authorizer |

#### Returns

the timeout, or `0`

Since: 0.9.0

### gdata_oauth1_authorizer_set_timeout ()

    void
    gdata_oauth1_authorizer_set_timeout (GDataOAuth1Authorizer *self,
                                         guint timeout);

Sets the “timeout” property; the network timeout, in seconds.

If `timeout` is `0`, network operations will never time out.

#### Parameters

self | a GDataOAuth1Authorizer |
timeout | the timeout, or `0` |

Since: 0.9.0

## Types and Values

### GDataOAuth1Authorizer

    typedef struct _GDataOAuth1Authorizer GDataOAuth1Authorizer;

All the fields in the GDataOAuth1Authorizer structure are private and should never be accessed directly.

Since: 0.9.0

### GDataOAuth1AuthorizerClass

    typedef struct {
    } GDataOAuth1AuthorizerClass;

All the fields in the GDataOAuth1AuthorizerClass structure are private and should never be accessed directly.

Since: 0.9.0

## Property Details

### The `“application-name”` property

      “application-name”         char *

The human-readable, translated application name for the client, to be presented to the user on the authentication page at the URI returned by `gdata_oauth1_authorizer_request_authentication_uri()`.

If `NULL` is provided in the constructor to GDataOAuth1Authorizer, the value returned by `g_get_application_name()` will be used as a fallback. Note that this may also be `NULL`: in this case, the authentication page will use the application name “anonymous”.

Owner: GDataOAuth1Authorizer

Flags: Read / Write / Construct Only

Default value: NULL

Since: 0.9.0

### The `“locale”` property

      “locale”                   char *

The locale to use for network requests, in Unix locale format. (e.g. "en_GB", "cs", "de_DE".) Use `NULL` for the default "C" locale (typically "en_US").

This locale will be used by the server-side software to localise the authentication and authorization pages at the URI returned by `gdata_oauth1_authorizer_request_authentication_uri()`.

The server-side behaviour is undefined if it doesn't support a given locale.

Owner: GDataOAuth1Authorizer

Flags: Read / Write

Default value: NULL

Since: 0.9.0

### The `“proxy-resolver”` property

      “proxy-resolver”           GProxyResolver *

The GProxyResolver used to determine a proxy URI. Setting this will clear the “proxy-uri” property.

Owner: GDataOAuth1Authorizer

Flags: Read / Write

Since: 0.15.0

### The `“proxy-uri”` property

      “proxy-uri”                SoupURI *

The proxy URI used internally for all network requests.

`GDataOAuth1Authorizer:proxy-uri` has been deprecated since version 0.15.0 and should not be used in newly-written code.

Use “proxy-resolver” instead, which gives more flexibility over the proxy used.

Owner: GDataOAuth1Authorizer

Flags: Read / Write

Since: 0.9.0

### The `“timeout”` property

      “timeout”                  guint

A timeout, in seconds, for network operations. If the timeout is exceeded, the operation will be cancelled and `GDATA_SERVICE_ERROR_NETWORK_ERROR` will be returned.

If the timeout is `0`, operations will never time out.

Owner: GDataOAuth1Authorizer

Flags: Read / Write

Default value: 0

Since: 0.9.0