% This file is public domain.

% arara: pdflatex
% arara: pdflatex
\documentclass[a4paper,twoside]{book}

\usepackage{times}
\usepackage{courier}
\usepackage{helvet}
\usepackage[margin=1in,top=1in,bottom=1in]{geometry}
\usepackage[hidelinks,
            plainpages=false,
            pdfpagelabels=true]{hyperref}
\usepackage{fancybox}
\usepackage{color}
\usepackage{ifthen}
\usepackage[pages=absolute,draft]{flowfram}

\newcommand{\sty}[1]{\textsf{#1}}
\newcommand{\env}[1]{\textsf{#1}}
\newcommand{\cmdname}[1]{\texttt{\symbol{92}#1}}
\newcommand{\meta}[1]{\textnormal{\textless\textit{#1}\textgreater}}

% set up some background frames to liven up the title page
\newlength{\leftwidth}
\newlength{\rightwidth}

\computeleftedgeodd{\leftwidth}
\setlength{\leftwidth}{-\leftwidth}
\addtolength{\leftwidth}{0.4\textwidth}
\setlength{\rightwidth}{\paperwidth}
\addtolength{\rightwidth}{-\leftwidth}
\vtwotone[1]{\leftwidth}{magenta}{backleft}{\rightwidth}{[cmyk]{0,0.48,0,0}}{backright}

% This is for the back cover.
\vtwotone[none]{\rightwidth}{[cmyk]{0,0.48,0,0}}{lastbackright}{\leftwidth}{magenta}{lastbackleft}

\vtwotonetop[odd]{1cm}{\leftwidth}{magenta}{oddtopleft}{\rightwidth}{[cmyk]{0,0.48,0,0}}{oddtopright}
\vtwotonetop[even]{1cm}{\rightwidth}{[cmyk]{0,0.48,0,0}}{eventopleft}{\leftwidth}{magenta}{eventopright}

% Set the margin width
\setlength{\marginparwidth}{2cm}

% now set up main document frames. Each page has a dynamic
% frame for the chapter heading, and a flow frame for the
% text.
\newflowframe{0.6\textwidth}{\textheight}{0pt}{0pt}[main]
\newdynamicframe{0.38\textwidth}{\textheight}{0.62\textwidth}{0pt}[chaphead]

% swap them round on even pages
\setflowframe*{main}{evenx=0.4\textwidth}
\setdynamicframe*{chaphead}{evenx=0pt,clear}

% set the margins to appear on the spine side of the page
\setflowframe*{main}{margin=inner}

% put chapter headings in dynamic frame with IDL chaphead
\ChapterInDynamic*{chaphead}

% change the text colour for just the chapter heading without
% affecting the minitoc:
\AddToHook{flowfram/chaphead/box/before}{\color{blue}}

% This document uses book.cls so flowfram applies patches to make
% the chapter style more flexible. These commands won't be available
% if another class or package has made modifications.
\renewcommand{\ffchapterdefaultfont}{\normalfont\Large\bfseries}
\renewcommand{\ffchapternamenumfont}[1]{#1}
\renewcommand{\ffchaptertitlefont}[1]{#1}
\renewcommand{\ffchapterpostnamenum}{.\ }
\renewcommand{\ffchapternamenum}[2]{#2}

% append chapter minitocs to same dynamic frame.
\appenddfminitoc*{chaphead}

% Make thumb tabs (specify each tab to be 2in high)

\makethumbtabs{2in}
\enableminitoc

% Thumbtabs are grey by default which looks a bit boring,
% so change the colours
\setthumbtab{1}{backcolor=[rgb]{0.7,0.5,1}}
\setthumbtab{2}{backcolor=[rgb]{0.6,0.4,1}}
\setthumbtab{3}{backcolor=[rgb]{0.5,0.3,1}}
\setthumbtab{4}{backcolor=[rgb]{0.4,0.2,1}}

% change the text style on the thumbtabs
%\newcommand{\thumbtabstyle}[1]{\textbf{\sffamily\large #1}}
\newcommand{\thumbtabstyle}[1]{\textsc{\sffamily #1}}
\setthumbtab{all}{style=thumbtabstyle,textcolor=white}

% set default page style

\pagestyle{plain}

% Put headers and footers in dynamic frames
\makedfheaderfooter

\newlength{\xoffset}
\computerightedgeodd{\xoffset}
\addtolength{\xoffset}{-2cm}
\newlength{\yoffset}
\computebottomedge{\yoffset}

\newcommand{\footstyle}[1]{\bfseries\LARGE #1}

% pages is initially set to none, as I don't want the footer to
% appear on the title page.

\setdynamicframe*{footer}
{oddx=\xoffset,y=\yoffset,width=2cm,height=2cm,
backcolor=blue,textcolor=white,style=footstyle,
pages=none}

% now work out the x offset for the even pages

\computeleftedgeeven{\xoffset}
\setdynamicframe*{footer}{evenx=\xoffset}

\flowframsetup{
 toc-thumbtabs=aligned
 %toc-thumbtabs=unaligned
 %toc-thumbtabs=false
}

% Individual thumbtab titles may be overridden:
\SetThumbTabTitle{4}{Misc}

\begin{document}
\ffswapoddeven*{main}% swap odd and even position of frame for the title page
\dfswapoddeven*{chaphead}
\title{Creating Flow Frames for Posters or Magazines}
\author{Nicola L. C. Talbot\\[1cm]\url{http://www.dickimaw-books.com/}}
\date{}
\pagenumbering{alph}
\maketitle

% make table of contents appear on a right hand page
\cleardoublepage

\frontmatter
\tableofcontents
% make the footers appear from this point on
\setdynamicframe*{footer}{pages=all}

\clearpage
\dfswapoddeven*{chaphead}
\ffswapoddeven*{main}% swap back again

\mainmatter
\enablethumbtabs
\chapter[][Intro]{Introduction}
\pagenumbering{arabic}

The \sty{flowfram} package is designed to enable you to create
frames in a document such that the 
contents of the \env{document} environment flow from one 
frame to the next in the order that they were defined.  
This is useful for creating posters\marginpar{A marginal note}
or magazines or any other form of document that does not 
conform to the standard one or two column layout.

This document has \themaxflow\ flow 
\ifthenelse{\value{maxflow}=1}{frame}{frames}, \themaxstatic\ static
\ifthenelse{\value{maxstatic}=1}{frame}{frames} and 
\themaxdynamic\ dynamic \ifthenelse{\value{maxdynamic}=1}{frame}{frames}.

\chapter[][New Frames]{Setting up Frames}

The \sty{flowfram} package provides three types of frame:
{flow frames}, {static 
frames} and {dynamic frames}.

\section{Flow Frames}

The flow frame is the principle type of frame.
The text of the \env{document} environment will flow from 
one frame to the next in order of definition. Each 
flow frame has an associated width, height, 
position on the page, and optionally a border\footnote{A
footnote!}.

\section{Static Frames}

A static frame is a rectangular area in which text neither
flows into, nor flows out of.  The contents must be set
explicitly, and once set, the contents of the static frame will
remain the same on each page until it is explicitly 
changed.  Thus, a static frame can be used, for example, to make 
a company logo appear in the same place on every page.

\section{Dynamic Frames}

A dynamic frame is similar to a static frame, but its contents
are re-typeset on each page. (A static frame stores its 
contents in a savebox, whereas a dynamic frame stores its
contents in a macro).

\chapter{Frame Attributes}
\label{sec:modattr}

Once you have defined the {flow frames}, {static frames} and 
{dynamic frames}, their attributes can be changed. 
The three types of frame mostly have the 
same set of attributes, but some are specific to a certain type.
The available attributes are as follows
(\textsuperscript{\textbf{F}} indicates the key is
only available for {flow frames}, 
\textsuperscript{\textbf{S}} indicates the key is only available 
for {static frames}
and \textsuperscript{\textbf{D}} indicates the key
is only available for {dynamic frames}):

\begin{description}
\item[width=\meta{length}]  The width of the frame.

\item[height=\meta{length}] The height of the frame.

\item[x=\meta{length}] The x-coordinate of the frame.

\item[y=\meta{length}] The y-coordinate of the frame.

\item[border=\meta{style}] The style of the border around the 
frame, this can take the values: \texttt{none} (no border),
\texttt{plain} (plain border) or the name of a \LaTeX\ 
frame making command without the preceding backslash. 
The value \texttt{fbox} is equivalent to \texttt{plain}.

\item[offset=\meta{offset}] The border offset, if it is a 
user-defined border.  This is the distance from the outer
edge of the left hand border to the left edge of the
bounding box of the text inside the border.  The \sty{flowfram}
package is able to compute the border for 
known frame making commands. 
If you define your own frame making command, you may need to 
specify the offset explicitly, or the frames 
may end up shifted to the right or left.

\item[bordercolor=\meta{colour}] The colour of the border
if you are using a standard frame making command.
The colour can either be specified as, e.g.\ \texttt{green},
or including the colour model, e.g. \verb/[rgb]{0,1,0}/.

\item[textcolor=\meta{colour}] The text colour for that 
frame. Again, the colour can either be specified as, 
e.g.\ \texttt{green}, or including the colour model, 
e.g. \verb/[rgb]{0,1,0}/.

\item[pages=\meta{page list}] The {list of 
pages} for which the frame
should appear. This can either have the values: \texttt{all},
\texttt{even}, \texttt{odd} or \texttt{none} (the latter 
removes the frame from that point on---useful if you
have multiple pages with the same number), or it can be a 
comma-separated list of single pages, or 
{page ranges}.

\item[margin=\meta{side}\textsuperscript{F}] The side of
the flow frame that its corresponding margin should go on. This
can take the values \texttt{left} or \texttt{right}.

\item[clear=\meta{boolean}\textsuperscript{S}] If this value
is set, the static frame will be cleared at the start of the
next page.

\item[style=\meta{cmd}\textsuperscript{D}] This should be
the name of a command \emph{without} the preceding backslash, 
to be applied to the contents of the specified dynamic frame. 
The command may either be a declaration, for example \verb/style=large/
which will set the contents of all the dynamic frames in a
large font, or it can be a command that takes a single argument,
for example \verb/style=textbf/
which will make the text for all the dynamic frames come out in 
bold.  To unset a style, do \verb/style=none/.

\end{description}

\chapter{Miscellaneous}

\section{Page Layout}

The \sty{flowfram} package has the package option \texttt{draft}
which will draw the {bounding boxes} for
each frame defined.  At the bottom right of each
bounding box (except for the bounding box denoting the 
typeblock), a marker will be shown to indictate the type
of frame, its IDN and its IDL.

You can see the layout for the current page (irrespective of
whether or not the \texttt{draft} option has been set) using
the command:\newline 
\cmdname{flowframeshowlayout}

The headers and footers will appear as usual (but will not
be shown in draft mode), according to the format given by 
\cmdname{pagestyle}.

\section{Frame Stacking Order}

The material on each page is placed in the following order:
\begin{enumerate}
\item Each static frame defined for that page in ascending
order of IDN.

\item Each flow frame defined for that page in ascending
order of IDN.

\item Each dynamic frame defined for that page in ascending
order of IDN.

\item {Bounding boxes} if the \texttt{draft}
package option has been used.
\end{enumerate}

This ordering can be used to determine if you want something
to overlay or underlay everything else on the page. 

\section{Prematurely Ending a Flow Frame}

You can force text to move immediately to the next defined
flow frame using one of the standard \LaTeX\ page breaking commands
which  work in an analogous way to the way they
work in standard two column mode. 

The command \cmdname{framebreak} is provided for situations
where a paragraph spans two flow frames
of different widths, as \TeX's output routine does not 
adjust to the new value of \cmdname{hsize} until the last 
paragraph of the previous frame has ended. As a 
result, the end of the paragraph at the beginning of the new
flow frame retains the width of the previous flow frame.

If you want to start a new page, rather than simply move to the 
next frame, use the command\newline
\cmdname{finishthispage}.

\section{Floats}

Since floats (such as figures and tables) can only go in 
{flow frames}, this package provides
the additional environments: 
\env{staticfigure} and  
\env{statictable} which can be used in static frames
and dynamic frames. Unlike their \env{figure} and
\env{table} counterparts, they are fixed in place, and
so do not take an optional placement specifier. The 
\cmdname{caption} and \cmdname{label} commands can 
be used within \env{staticfigure} and \env{statictable} as
usual.

The standard \env{figure} and \env{table} commands will 
behave as usual in the flow frames, but their starred versions,
\env{figure*} and \env{table*} behave no differently
from \env{figure} and \env{table}.

\section{Global Values}

The following macros can be changed using \cmdname{renewcommand}:

\begin{itemize}
\item \cmdname{setffdraftcolor} 

This sets the colour of the bounding box
when it is displayed in draft mode.

\item 
\cmdname{setffdrafttypeblockcolor} 

This sets the colour of
the bounding box of the typeblock when it is displayed
in draft mode.

\item \cmdname{fflabelfont}

This sets the font size for the bounding box markers in 
draft mode.

\end{itemize}

The following are lengths, which can be changed using
\cmdname{setlength}:
\marginpar{Another marginal note}

\begin{itemize}
\item \cmdname{fflabelsep}

This is the distance from the right hand side of the
bounding box at which to place the bounding box marker.

\item \cmdname{flowframesep}

This is the gap between the text of the frame and
its border, for the standard border types. 

\item \cmdname{flowframerule}

This is the width of the frame's border, if using
a border given by a frame making command that uses \cmdname{fboxsep}
to set its border width.
\end{itemize}


%\flowframsetup{unnumbered-thumbtabs}
\chapter*{Contact Details}
%\addcontentsline{toc}{chapter}{\protect\numberline{}Contact}
\disablethumbtabs

Dr Nicola Talbot\\
Dickimaw Books\\
\url{https://www.dickimaw-books.com/contact}

\finishthispage\mbox{}% empty back cover
\setdynamiccontents*{chaphead}{}
\setdynamicframe*{header,footer}{pages=none}
\setstaticframe*{lastbackleft,lastbackright}{pages=even}
\end{document}
