PERLAPI(1)

NAME
perlapi - autogenerated documentation for the perl public API

DESCRIPTION
This file contains most of the documentation of the perl public API, as generated by embed.pl. Specifically, it is a listing of functions, macros, flags, and variables that may be used by extension writers. Besides perlintern and config.h, some items are listed here as being actually documented in another pod.

At the end is a list of functions which have yet to be documented. Patches welcome! The interfaces of these are subject to change without notice.

Some of the functions documented here are consolidated so that a single entry serves for multiple functions which all do basically the same thing, but have some slight differences. For example, one form might process magic, while another doesn't. The name of each variation is listed at the top of the single entry.

The names of all API functions begin with the prefix "Perl_" so as to prevent any name collisions with your code. But, unless "-Accflags=-DPERL_NO_SHORT_NAMES" has been specified in compiling your code (see "Hiding Perl_" in perlembed), synonymous macros are also available to you that don't have this prefix, and also hide from you the need (or not) to have a thread context parameter passed to the function. Generally, code is easier to write and to read when the short form is used, so in practice that compilation flag is not used. Not all functions have the short form; both are listed here when available.

Anything not listed here or in the other mentioned pods is not part of the public API, and should not be used by extension writers at all. For these reasons, blindly using functions listed in proto.h is to be avoided when writing extensions.

In Perl, unlike C, a string of characters may generally contain embedded "NUL" characters. Sometimes in the documentation a Perl string is referred to as a "buffer" to distinguish it from a C string, but sometimes they are both just referred to as strings.

Note that all Perl API global variables must be referenced with the "PL_" prefix. Again, those not listed here are not to be used by extension writers, and may be changed or removed without notice; same with macros. Some macros are provided for compatibility with the older, unadorned names, but this support may be disabled in a future release.

Perl was originally written to handle US-ASCII only (that is characters whose ordinal numbers are in the range 0 - 127). And documentation and comments may still use the term ASCII, when sometimes in fact the entire range from 0 - 255 is meant.

The non-ASCII characters below 256 can have various meanings, depending on various things. (See, most notably, perllocale.) But usually the whole range can be referred to as ISO-8859-1. Often, the term "Latin-1" (or "Latin1") is used as an equivalent for ISO-8859-1. But some people treat "Latin1" as referring just to the characters in the range 128 through 255, or sometimes from 160 through 255. This documentation uses "Latin1" and "Latin-1" to refer to all 256 characters.

Note that Perl can be compiled and run under either ASCII or EBCDIC (See perlebcdic). Most of the documentation (and even comments in the code) ignore the EBCDIC possibility. For almost all purposes the differences are transparent. As an example, under EBCDIC, instead of UTF-8, UTF-EBCDIC is used to encode Unicode strings, and so whenever this documentation refers to "utf8" (and variants of that name, including in function names), it also (essentially transparently) means "UTF-EBCDIC". But the ordinals of characters differ between ASCII, EBCDIC, and the UTF- encodings, and a string encoded in UTF-EBCDIC may occupy a different number of bytes than in UTF-8.

The organization of this document is tentative and subject to change. Suggestions and patches welcome perl5-porters@perl.org <mailto:perl5-porters@perl.org>.

The API elements are grouped by functionality into sections, as follows. Within sections the elements are ordered alphabetically, ignoring case, with non-leading underscores sorted first, and leading underscores and digits sorted last.

"AV Handling"
"Callback Functions"
"Casting"
"Character case changing"
"Character classification"
"Compiler and Preprocessor information"
"Compiler directives"
"Compile-time scope hooks"
"Concurrency"
"COPs and Hint Hashes"
"Custom Operators"
"CV Handling"
"Debugging"
"Display functions"
"Embedding, Threads, and Interpreter Cloning"
"Errno"
"Exception Handling (simple) Macros"
"Filesystem configuration values"
"Floating point"
"General Configuration"
"Global Variables"
"GV Handling and Stashes"
"Hook manipulation"
"HV Handling"
"Input/Output"
"Integer"
"I/O Formats"
"Lexer interface"
"Locales"
"Magic"
"Memory Management"
"MRO"
"Multicall Functions"
"Numeric Functions"
"Optrees"
"Pack and Unpack"
"Pad Data Structures"
"Password and Group access"
"Paths to system commands"
"Prototype information"
"Reference-counted stack manipulation"
"REGEXP Functions"
"Reports and Formats"
"Signals"
"Site configuration"
"Sockets configuration values"
"Source Filters"
"Stack Manipulation Macros"
"String Handling"
"SV Flags"
"SV Handling"
"Tainting"
"Time"
"Typedef names"
"Unicode Support"
"Utility Functions"
"Versioning"
"Warning and Dieing"
"XS"
"Undocumented elements"

The listing below is alphabetical, case insensitive.

AV Handling

"AV"
    Described in perlguts.

"av_clear"
    Frees all the elements of an array, leaving it empty. The XS equivalent of "@array = ()". See also "av_undef".

    Note that it is possible that the actions of a destructor called directly or indirectly by freeing an element of the array could cause the reference count of the array itself to be reduced (e.g. by deleting an entry in the symbol table). So it is a possibility that the AV could have been freed (or even reallocated) on return from the call unless you hold a reference to it.

     void       av_clear(      AV *av)
     void  Perl_av_clear(pTHX_ AV *av)

"av_count"
    Returns the number of elements in the array "av". This is the true length of the array, including any undefined elements. It is always the same as "av_top_index(av) + 1".

     Size_t       av_count(      AV *av)
     Size_t  Perl_av_count(pTHX_ AV *av)

"av_create_and_push"
    Push an SV onto the end of the array, creating the array if necessary. A small internal helper function to remove a commonly duplicated idiom.

     void  Perl_av_create_and_push(pTHX_ AV ** const avp,
                                         SV * const val)

"av_create_and_unshift_one"
    Unshifts an SV onto the beginning of the array, creating the array if necessary. A small internal helper function to remove a commonly duplicated idiom.

     SV **  Perl_av_create_and_unshift_one(pTHX_ AV ** const avp,
                                                 SV * const val)

"av_delete"
    Deletes the element indexed by "key" from the array, makes the element mortal, and returns it. If "flags" equals "G_DISCARD", the element is freed and NULL is returned. NULL is also returned if "key" is out of range.

    Perl equivalent: "splice(@myarray, $key, 1, undef)" (with the "splice" in void context if "G_DISCARD" is present).

     SV *       av_delete(      AV *av, SSize_t key, I32 flags)
     SV *  Perl_av_delete(pTHX_ AV *av, SSize_t key, I32 flags)

"av_exists"
    Returns true if the element indexed by "key" has been initialized.

    This relies on the fact that uninitialized array elements are set to "NULL".

    Perl equivalent: exists($myarray[$key]).

     bool       av_exists(      AV *av, SSize_t key)
     bool  Perl_av_exists(pTHX_ AV *av, SSize_t key)

"av_extend"
    Pre-extend an array so that it is capable of storing values at indexes "0..key". Thus "av_extend(av,99)" guarantees that the array can store 100 elements, i.e. that "av_store(av, 0, sv)" through "av_store(av, 99, sv)" on a plain array will work without any further memory allocation.

    If the av argument is a tied array then will call the "EXTEND" tied array method with an argument of "(key+1)".

     void       av_extend(      AV *av, SSize_t key)
     void  Perl_av_extend(pTHX_ AV *av, SSize_t key)

"av_fetch"
    Returns the SV at the specified index in the array. The "key" is the index. If "lval" is true, you are guaranteed to get a real SV back (in case it wasn't real before), which you can then modify. Check that the return value is non-NULL before dereferencing it to a "SV*".

    See "Understanding the Magic of Tied Hashes and Arrays" in perlguts for more information on how to use this function on tied arrays.

    The rough perl equivalent is $myarray[$key].

     SV **       av_fetch(      AV *av, SSize_t key, I32 lval)
     SV **  Perl_av_fetch(pTHX_ AV *av, SSize_t key, I32 lval)

"av_fill"
    Set the highest index in the array to the given number, equivalent to Perl's "$#array = $fill;".

    The number of elements in the array will be "fill + 1" after av_fill() returns. If the array was previously shorter, then the additional elements appended are set to NULL. If the array was longer, then the excess elements are freed. "av_fill(av, -1)" is the same as av_clear(av).

     void       av_fill(      AV *av, SSize_t fill)
     void  Perl_av_fill(pTHX_ AV *av, SSize_t fill)

"av_len*"
    Described under "av_top_index"

"av_make"
    Creates a new AV and populates it with a list (**strp, length "size") of SVs. A copy is made of each SV, so their refcounts are not changed. The new AV will have a reference count of 1.

    Perl equivalent: "my @new_array = ($scalar1, $scalar2, $scalar3...);"

     AV *       av_make(      SSize_t size, SV **strp)
     AV *  Perl_av_make(pTHX_ SSize_t size, SV **strp)

"av_pop"
    Removes one SV from the end of the array, reducing its size by one and returning the SV (transferring control of one reference count) to the caller. Returns &PL_sv_undef if the array is empty.

    Perl equivalent: "pop(@myarray);"

     SV *       av_pop(      AV *av)
     SV *  Perl_av_pop(pTHX_ AV *av)

"av_push"
"av_push_simple"
    These each push an SV (transferring control of one reference count) onto the end of the array. The array will grow automatically to accommodate the addition.

    Perl equivalent: "push @myarray, $val;".

    "av_push" is the general purpose form, suitable for all situations.

    "av_push_simple" is a cut-down version of "av_push" that assumes that the array is very straightforward, with no magic, not readonly, and is AvREAL (see "Real AVs - and those that are not" in perlguts), and that "key" is not less than -1. This function MUST NOT be used in situations where any of those assumptions may not hold.

     void       av_push       (      AV *av, SV *val)
     void  Perl_av_push       (pTHX_ AV *av, SV *val)
     void       av_push_simple(      AV *av, SV *val)
     void  Perl_av_push_simple(pTHX_ AV *av, SV *val)

"av_shift"
    Removes one SV from the start of the array, reducing its size by one and returning the SV (transferring control of one reference count) to the caller. Returns &PL_sv_undef if the array is empty.

    Perl equivalent: "shift(@myarray);"

     SV *       av_shift(      AV *av)
     SV *  Perl_av_shift(pTHX_ AV *av)

"av_store"
    Stores an SV in an array. The array index is specified as "key". The return value will be "NULL" if the operation failed or if the value did not need to be actually stored within the array (as in the case of tied arrays). Otherwise, it can be dereferenced to get the "SV*" that was stored there (= "val")).

    Note that the caller is responsible for suitably incrementing the reference count of "val" before the call, and decrementing it if the function returned "NULL".

    Approximate Perl equivalent: "splice(@myarray, $key, 1, $val)".

    See "Understanding the Magic of Tied Hashes and Arrays" in perlguts for more information on how to use this function on tied arrays.

     SV **       av_store(      AV *av, SSize_t key, SV *val)
     SV **  Perl_av_store(pTHX_ AV *av, SSize_t key, SV *val)

"av_top_index"
"av_tindex"
"AvFILL"
"av_len"
    These behave identically. If the array "av" is empty, these return -1; otherwise they return the maximum value of the indices of all the array elements which are currently defined in "av".

    They process 'get' magic.

    The Perl equivalent for these is $#av.

    Note that, unlike what the name "av_len" implies, it returns the maximum index in the array. This is unlike "sv_len", which returns what you would expect. To get the actual number of elements in an array, use "av_count".

     SSize_t       av_top_index(      AV *av)
     SSize_t       av_tindex   (      AV *av)
     SSize_t       AvFILL      (      AV* av)
     SSize_t       av_len      (      AV *av)
     SSize_t  Perl_av_len      (pTHX_ AV *av)

"av_undef"
    Undefines the array. The XS equivalent of undef(@array).

    As well as freeing all the elements of the array (like av_clear()), this also frees the memory used by the av to store its list of scalars.

    See "av_clear" for a note about the array possibly being invalid on return.

     void       av_undef(      AV *av)
     void  Perl_av_undef(pTHX_ AV *av)

"av_unshift"
    Unshift the given number of "undef" values onto the beginning of the array. The array will grow automatically to accommodate the addition.

    Perl equivalent: "unshift @myarray, ((undef) x $num);"

     void       av_unshift(      AV *av, SSize_t num)
     void  Perl_av_unshift(pTHX_ AV *av, SSize_t num)

"AvALLOC"
    Described in perlguts.

       AvALLOC(AV* av)

"AvARRAY"
    Returns a pointer to the AV's internal SV* array.

    This is useful for doing pointer arithmetic on the array. If all you need is to look up an array element, then prefer "av_fetch".

     SV**  AvARRAY(AV* av)

"AvFILL*"
    Described under "av_top_index"

"AvREFCNT_inc"
"AvREFCNT_inc_simple"
"AvREFCNT_inc_simple_NN"
    These all increment the reference count of the given SV, which must be an AV. They are useful when assigning the result into a typed pointer as they avoid the need to cast the result to the appropriate type.

     AV *  AvREFCNT_inc          (AV *av)
     AV *  AvREFCNT_inc_simple   (AV *av)
     AV *  AvREFCNT_inc_simple_NN(AV *av)

"get_av"
    Returns the AV of the specified Perl global or package array with the given name (so it won't work on lexical variables). "flags" are passed to "gv_fetchpv". If "GV_ADD" is set and the Perl variable does not exist then it will be created. If "flags" is zero (ignoring "SVf_UTF8") and the variable does not exist then "NULL" is returned.

    Perl equivalent: "@{"$name"}".

    NOTE: the perl_get_av() form is deprecated.

     AV *       get_av(      const char *name, I32 flags)
     AV *  Perl_get_av(pTHX_ const char *name, I32 flags)

"newAV"
"newAV_mortal"
"newAV_alloc_x"
"newAV_alloc_xz"
    These all create a new AV, setting the reference count to 1. If you also know the initial elements of the array with, see ""av_make"".

    As background, an array consists of three things:

    1.  A data structure containing information about the array as a whole, such as its size and reference count.

    2.  A C language array of pointers to the individual elements. These are treated as pointers to SVs, so all must be castable to SV*.

    3.  The individual elements themselves. These could be, for instance, SVs and/or AVs and/or HVs, etc.

    An empty array need only have the first data structure, and all these functions create that. They differ in what else they do, as follows:

    "newAV" form
        This does nothing beyond creating the whole-array data structure. The Perl equivalent is approximately "my @array;"

        This is useful when the minimum size of the array could be zero (perhaps there are likely code paths that will entirely skip using it).

        If the array does get used, the pointers data structure will need to be allocated at that time. This will end up being done by "av_extend">, either explicitly:

            av_extend(av, len);

        or implicitly when the first element is stored:

            (void)av_store(av, 0, sv);

        Unused array elements are typically initialized by "av_extend".

    "newAV_mortal" form
        This also creates the whole-array data structure, but also mortalises it. (That is to say, a reference to the AV is added to the "temps" stack.)

    "newAV_alloc_x" form
        This effectively does a "newAV" followed by also allocating (uninitialized) space for the pointers array. This is used when you know ahead of time the likely minimum size of the array. It is more efficient to do this than doing a plain "newAV" followed by an "av_extend".

        Of course the array can be extended later should it become necessary.

        "size" must be at least 1.

    "newAV_alloc_xz" form
        This is "newAV_alloc_x", but initializes each pointer in it to NULL. This gives added safety to guard against them being read before being set.

        "size" must be at least 1.

    The following examples all result in an array that can fit four elements (indexes 0 .. 3):

        AV *av = newAV();
        av_extend(av, 3);

        AV *av = newAV_alloc_x(4);

        AV *av = newAV_alloc_xz(4);

    In contrast, the following examples allocate an array that is only guaranteed to fit one element without extending:

        AV *av = newAV_alloc_x(1);
        AV *av = newAV_alloc_xz(1);

     AV *       newAV         ()
     AV *  Perl_newAV         (pTHX)
     AV *       newAV_mortal  ()
     AV *       newAV_alloc_x (SSize_t size)
     AV *       newAV_alloc_xz(SSize_t size)

"newAVav"
    Creates a new AV and populates it with values copied from an existing AV. The new AV will have a reference count of 1, and will contain newly created SVs copied from the original SV. The original source will remain unchanged.

    Perl equivalent: "my @new_array = @existing_array;"

     AV *       newAVav(      AV *oav)
     AV *  Perl_newAVav(pTHX_ AV *oav)

"newAVhv"
    Creates a new AV and populates it with keys and values copied from an existing HV. The new AV will have a reference count of 1, and will contain newly created SVs copied from the original HV. The original source will remain unchanged.

    Perl equivalent: "my @new_array = %existing_hash;"

     AV *       newAVhv(      HV *ohv)
     AV *  Perl_newAVhv(pTHX_ HV *ohv)

"Nullav"
    "DEPRECATED!" It is planned to remove "Nullav" from a future release of Perl. Do not use it for new code; remove it from existing code.

    Null AV pointer.

    (deprecated - use "(AV *)NULL" instead)

Callback Functions

"call_argv"
    Performs a callback to the specified named and package-scoped Perl subroutine with "argv" (a "NULL"-terminated array of strings) as arguments. See perlcall.

    Approximate Perl equivalent: "&{"$sub_name"}(@$argv)".

    NOTE: the perl_call_argv() form is deprecated.

     SSize_t       call_argv(      const char *sub_name, I32 flags,
                                   char **argv)
     SSize_t  Perl_call_argv(pTHX_ const char *sub_name, I32 flags,
                                   char **argv)

"call_method"
    Performs a callback to the specified Perl method. The blessed object must be on the stack. See perlcall.

    NOTE: the perl_call_method() form is deprecated.

     SSize_t       call_method(      const char *methname, I32 flags)
     SSize_t  Perl_call_method(pTHX_ const char *methname, I32 flags)

"call_pv"
    Performs a callback to the specified Perl sub. See perlcall.

    NOTE: the perl_call_pv() form is deprecated.

     SSize_t       call_pv(      const char *sub_name, I32 flags)
     SSize_t  Perl_call_pv(pTHX_ const char *sub_name, I32 flags)

"call_sv"
    Performs a callback to the Perl sub specified by the SV.

    If neither the "G_METHOD" nor "G_METHOD_NAMED" flag is supplied, the SV may be any of a CV, a GV, a reference to a CV, a reference to a GV or SvPV(sv) will be used as the name of the sub to call.

    If the "G_METHOD" flag is supplied, the SV may be a reference to a CV or SvPV(sv) will be used as the name of the method to call.

    If the "G_METHOD_NAMED" flag is supplied, SvPV(sv) will be used as the name of the method to call.

    Some other values are treated specially for internal use and should not be depended on.

    See perlcall.

    NOTE: the perl_call_sv() form is deprecated.

     SSize_t       call_sv(      SV *sv, I32 flags)
     SSize_t  Perl_call_sv(pTHX_ SV *sv, I32 flags)

"DESTRUCTORFUNC_NOCONTEXT_t"
"DESTRUCTORFUNC_t"
    Described in perlguts.

"ENTER"
    Opening bracket on a callback. See "LEAVE" and perlcall.

       ENTER;

"ENTER_with_name"
    Same as "ENTER", but when debugging is enabled it also associates the given literal string with the new scope.

       ENTER_with_name("name");

"eval_pv"
    Tells Perl to "eval" the given string in scalar context and return an SV* result.

    NOTE: the perl_eval_pv() form is deprecated.

     SV *       eval_pv(      const char *p, I32 croak_on_error)
     SV *  Perl_eval_pv(pTHX_ const char *p, I32 croak_on_error)

"eval_sv"
    Tells Perl to "eval" the string in the SV. It supports the same flags as "call_sv", with the obvious exception of "G_EVAL". See perlcall.

    The "G_RETHROW" flag can be used if you only need eval_sv() to execute code specified by a string, but not catch any errors.

    By default the code is compiled and executed with the default hints, such as strict and features. Set "G_USEHINTS" in flags to use the current hints from "PL_curcop".

    NOTE: the perl_eval_sv() form is deprecated.

     SSize_t       eval_sv(      SV *sv, I32 flags)
     SSize_t  Perl_eval_sv(pTHX_ SV *sv, I32 flags)

"FREETMPS"
    Closing bracket for temporaries on a callback. See "SAVETMPS" and perlcall.

       FREETMPS;

"G_DISCARD"
"G_EVAL"
"G_KEEPERR"
"G_LIST"
"G_NOARGS"
"G_SCALAR"
"G_VOID"
    Described in perlcall.

"GIMME"
    "DEPRECATED!" It is planned to remove "GIMME" from a future release of Perl. Do not use it for new code; remove it from existing code.

    A backward-compatible version of "GIMME_V" which can only return "G_SCALAR" or "G_LIST"; in a void context, it returns "G_SCALAR". Deprecated. Use "GIMME_V" instead.

     U32  GIMME

"GIMME_V"
    The XSUB-writer's equivalent to Perl's "wantarray". Returns "G_VOID", "G_SCALAR" or "G_LIST" for void, scalar or list context, respectively. See perlcall for a usage example.

     U32  GIMME_V

"is_lvalue_sub"
    Returns non-zero if the sub calling this function is being called in an lvalue context. Returns 0 otherwise.

     I32       is_lvalue_sub()
     I32  Perl_is_lvalue_sub(pTHX)

"LEAVE"
    Closing bracket on a callback. See "ENTER" and perlcall.

       LEAVE;

"LEAVE_with_name"
    Same as "LEAVE", but when debugging is enabled it first checks that the scope has the given name. "name" must be a literal string.

       LEAVE_with_name("name");

"mortal_destructor_sv"
    This function arranges for either a Perl code reference, or a C function reference to be called at the end of the current statement.

    The "coderef" argument determines the type of function that will be called. If it is SvROK() it is assumed to be a reference to a CV and will arrange for the coderef to be called. If it is not SvROK() then it is assumed to be a SvIV() which is SvIOK() whose value is a pointer to a C function of type "DESTRUCTORFUNC_t" created using PTR2INT(). Either way the "args" parameter will be provided to the callback as a parameter, although the rules for doing so differ between the Perl and C mode. Normally this function is only used directly for the Perl case and the wrapper mortal_destructor_x() is used for the C function case.

    When operating in Perl callback mode the "args" parameter may be NULL in which case the code reference is called with no arguments, otherwise if it is an AV (SvTYPE(args) == SVt_PVAV) then the contents of the AV will be used as the arguments to the code reference, and if it is any other type then the "args" SV will be provided as a single argument to the code reference.

    When operating in a C callback mode the "args" parameter will be passed directly to the C function as a "void *" pointer. No additional processing of the argument will be performed, and it is the callers responsibility to free the "args" parameter if necessary.

    Be aware that there is a significant difference in timing between the end of the current statement and the end of the current pseudo block. If you are looking for a mechanism to trigger a function at the end of the current pseudo block you should look at ""SAVEDESTRUCTOR_X"" in perlapi instead of this function.

     void       mortal_destructor_sv(      SV *coderef, SV *args)
     void  Perl_mortal_destructor_sv(pTHX_ SV *coderef, SV *args)

"MORTALDESTRUCTOR_SV"
"MORTALSVFUNC_X"
    Described in perlguts.

       MORTALDESTRUCTOR_SV(SV *coderef, SV *args)
       MORTALSVFUNC_X     (SVFUNC_t f, SV *sv)

"PL_errgv"
    Described in perlcall.

"save_aelem"
"save_aelem_flags"
    These each arrange for the value of the array element "av[idx]" to be restored at the end of the enclosing pseudo-block.

    In "save_aelem", the SV at C**sptr> will be replaced by a new "undef" scalar. That scalar will inherit any magic from the original **sptr, and any 'set' magic will be processed.

    In "save_aelem_flags", "SAVEf_KEEPOLDELEM" being set in "flags" causes the function to forgo all that: the scalar at **sptr is untouched. If "SAVEf_KEEPOLDELEM" is not set, the SV at C**sptr> will be replaced by a new "undef" scalar. That scalar will inherit any magic from the original **sptr. Any 'set' magic will be processed if and only if "SAVEf_SETMAGIC" is set in in "flags".

     void       save_aelem      (      AV *av, SSize_t idx, SV **sptr)
     void       save_aelem_flags(      AV *av, SSize_t idx, SV **sptr,
                                       const U32 flags)
     void  Perl_save_aelem_flags(pTHX_ AV *av, SSize_t idx, SV **sptr,
                                       const U32 flags)

"save_aptr"
"save_ary"
"save_hash"
    Described in perlguts.

     void       save_aptr(      AV **aptr)
     void  Perl_save_aptr(pTHX_ AV **aptr)
     AV *       save_ary (      GV *gv)
     AV *  Perl_save_ary (pTHX_ GV *gv)
     HV *       save_hash(      GV *gv)
     HV *  Perl_save_hash(pTHX_ GV *gv)

"save_helem"
"save_helem_flags"
    These each arrange for the value of the hash element (in Perlish terms) "$hv{key}]" to be restored at the end of the enclosing pseudo-block.

    In "save_helem", the SV at C**sptr> will be replaced by a new "undef" scalar. That scalar will inherit any magic from the original **sptr, and any 'set' magic will be processed.

    In "save_helem_flags", "SAVEf_KEEPOLDELEM" being set in "flags" causes the function to forgo all that: the scalar at **sptr is untouched. If "SAVEf_KEEPOLDELEM" is not set, the SV at C**sptr> will be replaced by a new "undef" scalar. That scalar will inherit any magic from the original **sptr. Any 'set' magic will be processed if and only if "SAVEf_SETMAGIC" is set in in "flags".

     void       save_helem      (      HV *hv, SV *key, SV **sptr)
     void       save_helem_flags(      HV *hv, SV *key, SV **sptr,
                                       const U32 flags)
     void  Perl_save_helem_flags(pTHX_ HV *hv, SV *key, SV **sptr,
                                       const U32 flags)

"save_hptr"
"save_item"
"save_scalar"
"save_svref"
"SAVEBOOL"
"SAVEDELETE"
"SAVEDESTRUCTOR"
"SAVEDESTRUCTOR_X"
"SAVEFREEOP"
"SAVEFREEPV"
"SAVEFREERCPV"
"SAVEFREESV"
"SAVEGENERICSV"
"SAVEINT"
"SAVEIV"
"SAVEI8"
"SAVEI16"
"SAVEI32"
"SAVEMORTALIZESV"
"SAVEPPTR"
"SAVERCPV"
"SAVESPTR"
"SAVESTACK_POS"
"SAVESTRLEN"
    Described in perlguts.

     void       save_hptr       (      HV **hptr)
     void  Perl_save_hptr       (pTHX_ HV **hptr)
     void       save_item       (      SV *item)
     void  Perl_save_item       (pTHX_ SV *item)
     SV *       save_scalar     (      GV *gv)
     SV *  Perl_save_scalar     (pTHX_ GV *gv)
     SV *       save_svref      (      SV **sptr)
     SV *  Perl_save_svref      (pTHX_ SV **sptr)
                SAVEBOOL        (      bool i)
                SAVEDELETE      (      HV * hv, char * key,
                                       I32 length)
                SAVEDESTRUCTOR  (      DESTRUCTORFUNC_NOCONTEXT_t f,
                                       void *p)
                SAVEDESTRUCTOR_X(      DESTRUCTORFUNC_t f, void *p)
                SAVEFREEOP      (      OP *op)
                SAVEFREEPV      (      char *pv)
                SAVEFREERCPV    (      char *pv)
                SAVEFREESV      (      SV* sv)
                SAVEGENERICSV   (      char **psv)
                SAVEINT         (      int i)
                SAVEIV          (      IV i)
                SAVEI8          (      I8 i)
                SAVEI16         (      I16 i)
                SAVEI32         (      I32 i)
                SAVEMORTALIZESV (      SV* sv)
                SAVEPPTR        (      char * p)
                SAVERCPV        (      char *pv)
                SAVESPTR        (      SV * s)
                SAVESTACK_POS   ()
                SAVESTRLEN      (      STRLEN i)

"SAVETMPS"
    Opening bracket for temporaries on a callback. See "FREETMPS" and perlcall.

       SAVETMPS;

Casting

"cBOOL"
    Cast-to-bool. When Perl was able to be compiled on pre-C99 compilers, a "(bool)" cast didn't necessarily do the right thing, so this macro was created (and made somewhat complicated to work around bugs in old compilers). Now, many years later, and C99 is used, this is no longer required, but is kept for backwards compatibility.

     bool  cBOOL(bool expr)

"I_V"
    Cast an NV to IV while avoiding undefined C behavior

     IV  I_V(NV what)

"I_32"
    Cast an NV to I32 while avoiding undefined C behavior

     I32  I_32(NV what)

"INT2PTR"
"PTRV"
"PTR2IV"
"PTR2nat"
"PTR2NV"
"PTR2ul"
"PTR2UV"
    Described in perlguts.

     type           INT2PTR(type, int value)
     IV             PTR2IV (void * ptr)
     IV             PTR2nat(void *)
     NV             PTR2NV (void * ptr)
     unsigned long  PTR2ul (void *)
     UV             PTR2UV (void * ptr)

"U_V"
    Cast an NV to UV while avoiding undefined C behavior

     UV  U_V(NV what)

"U_32"
    Cast an NV to U32 while avoiding undefined C behavior

     U32  U_32(NV what)

Character case changing
Perl uses "full" Unicode case mappings. This means that converting a single character to another case may result in a sequence of more than one character. For example, the uppercase of "ß" (LATIN SMALL LETTER SHARP S) is the two character sequence "SS". This presents some complications The lowercase of all characters in the range 0..255 is a single character, and thus "toLOWER_L1" is furnished. But, "toUPPER_L1" can't exist, as it couldn't return a valid result for all legal inputs. Instead "toUPPER_uvchr" has an API that does allow every possible legal result to be returned.) Likewise no other function that is crippled by not being able to give the correct results for the full range of possible inputs has been implemented here.

"toFOLD"
"toFOLD_A"
"toFOLD_utf8"
"toFOLD_utf8_safe"
"toFOLD_uvchr"
    These all return the foldcase of a character. "foldcase" is an internal case for "/i" pattern matching. If the foldcase of character A and the foldcase of character B are the same, they match caselessly; otherwise they don't.

    The differences in the forms are what domain they operate on, and whether the input is specified as a code point (those forms with a "cp" parameter) or as a UTF-8 string (the others). In the latter case, the code point to use is the first one in the buffer of UTF-8 encoded code points, delineated by the arguments "p .. e - 1".

    "toFOLD" and "toFOLD_A" are synonyms of each other. They return the foldcase of any ASCII-range code point. In this range, the foldcase is identical to the lowercase. All other inputs are returned unchanged. Since these are macros, the input type may be any integral one, and the output will occupy the same number of bits as the input.

    There is no "toFOLD_L1" nor "toFOLD_LATIN1" as the foldcase of some code points in the 0..255 range is above that range or consists of multiple characters. Instead use "toFOLD_uvchr".

    "toFOLD_uvchr" returns the foldcase of any Unicode code point. The return value is identical to that of "toFOLD_A" for input code points in the ASCII range. The foldcase of the vast majority of Unicode code points is the same as the code point itself. For these, and for code points above the legal Unicode maximum, this returns the input code point unchanged. It additionally stores the UTF-8 of the result into the buffer beginning at "s", and its length in bytes into *lenp. The caller must have made "s" large enough to contain at least "UTF8_MAXBYTES_CASE+1" bytes to avoid possible overflow.

    NOTE: the foldcase of a code point may be more than one code point. The return value of this function is only the first of these. The entire foldcase is returned in "s". To determine if the result is more than a single code point, you can do something like this:

     uc = toFOLD_uvchr(cp, s, &len);
     if (len > UTF8SKIP(s)) { is multiple code points }
     else { is a single code point }

    "toFOLD_utf8" and "toFOLD_utf8_safe" are synonyms of each other. The only difference between these and "toFOLD_uvchr" is that the source for these is encoded in UTF-8, instead of being a code point. It is passed as a buffer starting at "p", with "e" pointing to one byte beyond its end. The "p" buffer may certainly contain more than one code point; but only the first one (up through "e - 1") is examined. If the UTF-8 for the input character is malformed in some way, the program may croak, or the function may return the REPLACEMENT CHARACTER, at the discretion of the implementation, and subject to change in future releases.

     UV  toFOLD          (UV cp)
     UV  toFOLD_A        (UV cp)
     UV  toFOLD_utf8     (U8* p, U8* e, U8* s, STRLEN* lenp)
     UV  toFOLD_utf8_safe(U8* p, U8* e, U8* s, STRLEN* lenp)
     UV  toFOLD_uvchr    (UV cp, U8* s, STRLEN* lenp)

"toLOWER"
"toLOWER_A"
"toLOWER_LATIN1"
"toLOWER_LC"
"toLOWER_L1"
"toLOWER_utf8"
"toLOWER_utf8_safe"
"toLOWER_uvchr"
    These all return the lowercase of a character. The differences are what domain they operate on, and whether the input is specified as a code point (those forms with a "cp" parameter) or as a UTF-8 string (the others). In the latter case, the code point to use is the first one in the buffer of UTF-8 encoded code points, delineated by the arguments "p .. e - 1".

    "toLOWER" and "toLOWER_A" are synonyms of each other. They return the lowercase of any uppercase ASCII-range code point. All other inputs are returned unchanged. Since these are macros, the input type may be any integral one, and the output will occupy the same number of bits as the input.

    "toLOWER_L1" and "toLOWER_LATIN1" are synonyms of each other. They behave identically as "toLOWER" for ASCII-range input. But additionally will return the lowercase of any uppercase code point in the entire 0..255 range, assuming a Latin-1 encoding (or the EBCDIC equivalent on such platforms).

    "toLOWER_LC" returns the lowercase of the input code point according to the rules of the current POSIX locale. Input code points outside the range 0..255 are returned unchanged.

    "toLOWER_uvchr" returns the lowercase of any Unicode code point. The return value is identical to that of "toLOWER_L1" for input code points in the 0..255 range. The lowercase of the vast majority of Unicode code points is the same as the code point itself. For these, and for code points above the legal Unicode maximum, this returns the input code point unchanged. It additionally stores the UTF-8 of the result into the buffer beginning at "s", and its length in bytes into *lenp. The caller must have made "s" large enough to contain at least "UTF8_MAXBYTES_CASE+1" bytes to avoid possible overflow.

    NOTE: the lowercase of a code point may be more than one code point. The return value of this function is only the first of these. The entire lowercase is returned in "s". To determine if the result is more than a single code point, you can do something like this:

     uc = toLOWER_uvchr(cp, s, &len);
     if (len > UTF8SKIP(s)) { is multiple code points }
     else { is a single code point }

    "toLOWER_utf8" and "toLOWER_utf8_safe" are synonyms of each other. The only difference between these and "toLOWER_uvchr" is that the source for these is encoded in UTF-8, instead of being a code point. It is passed as a buffer starting at "p", with "e" pointing to one byte beyond its end. The "p" buffer may certainly contain more than one code point; but only the first one (up through "e - 1") is examined. If the UTF-8 for the input character is malformed in some way, the program may croak, or the function may return the REPLACEMENT CHARACTER, at the discretion of the implementation, and subject to change in future releases.

     UV  toLOWER          (UV cp)
     UV  toLOWER_A        (UV cp)
     UV  toLOWER_LATIN1   (UV cp)
     UV  toLOWER_LC       (UV cp)
     UV  toLOWER_L1       (UV cp)
     UV  toLOWER_utf8     (U8* p, U8* e, U8* s, STRLEN* lenp)
     UV  toLOWER_utf8_safe(U8* p, U8* e, U8* s, STRLEN* lenp)
     UV  toLOWER_uvchr    (UV cp, U8* s, STRLEN* lenp)

"toTITLE"
"toTITLE_A"
"toTITLE_utf8"
"toTITLE_utf8_safe"
"toTITLE_uvchr"
    These all return the titlecase of a character. The differences are what domain they operate on, and whether the input is specified as a code point (those forms with a "cp" parameter) or as a UTF-8 string (the others). In the latter case, the code point to use is the first one in the buffer of UTF-8 encoded code points, delineated by the arguments "p .. e - 1".

    "toTITLE" and "toTITLE_A" are synonyms of each other. They return the titlecase of any lowercase ASCII-range code point. In this range, the titlecase is identical to the uppercase. All other inputs are returned unchanged. Since these are macros, the input type may be any integral one, and the output will occupy the same number of bits as the input.

    There is no "toTITLE_L1" nor "toTITLE_LATIN1" as the titlecase of some code points in the 0..255 range is above that range or consists of multiple characters. Instead use "toTITLE_uvchr".

    "toTITLE_uvchr" returns the titlecase of any Unicode code point. The return value is identical to that of "toTITLE_A" for input code points in the ASCII range. The titlecase of the vast majority of Unicode code points is the same as the code point itself. For these, and for code points above the legal Unicode maximum, this returns the input code point unchanged. It additionally stores the UTF-8 of the result into the buffer beginning at "s", and its length in bytes into *lenp. The caller must have made "s" large enough to contain at least "UTF8_MAXBYTES_CASE+1" bytes to avoid possible overflow.

    NOTE: the titlecase of a code point may be more than one code point. The return value of this function is only the first of these. The entire titlecase is returned in "s". To determine if the result is more than a single code point, you can do something like this:

     uc = toTITLE_uvchr(cp, s, &len);
     if (len > UTF8SKIP(s)) { is multiple code points }
     else { is a single code point }

    "toTITLE_utf8" and "toTITLE_utf8_safe" are synonyms of each other. The only difference between these and "toTITLE_uvchr" is that the source for these is encoded in UTF-8, instead of being a code point. It is passed as a buffer starting at "p", with "e" pointing to one byte beyond its end. The "p" buffer may certainly contain more than one code point; but only the first one (up through "e - 1") is examined. If the UTF-8 for the input character is malformed in some way, the program may croak, or the function may return the REPLACEMENT CHARACTER, at the discretion of the implementation, and subject to change in future releases.

     UV  toTITLE          (UV cp)
     UV  toTITLE_A        (UV cp)
     UV  toTITLE_utf8     (U8* p, U8* e, U8* s, STRLEN* lenp)
     UV  toTITLE_utf8_safe(U8* p, U8* e, U8* s, STRLEN* lenp)
     UV  toTITLE_uvchr    (UV cp, U8* s, STRLEN* lenp)

"toUPPER"
"toUPPER_A"
"toUPPER_utf8"
"toUPPER_utf8_safe"
"toUPPER_uvchr"
    These all return the uppercase of a character. The differences are what domain they operate on, and whether the input is specified as a code point (those forms with a "cp" parameter) or as a UTF-8 string (the others). In the latter case, the code point to use is the first one in the buffer of UTF-8 encoded code points, delineated by the arguments "p .. e - 1".

    "toUPPER" and "toUPPER_A" are synonyms of each other. They return the uppercase of any lowercase ASCII-range code point. All other inputs are returned unchanged. Since these are macros, the input type may be any integral one, and the output will occupy the same number of bits as the input.

    There is no "toUPPER_L1" nor "toUPPER_LATIN1" as the uppercase of some code points in the 0..255 range is above that range or consists of multiple characters. Instead use "toUPPER_uvchr".

    "toUPPER_uvchr" returns the uppercase of any Unicode code point. The return value is identical to that of "toUPPER_A" for input code points in the ASCII range. The uppercase of the vast majority of Unicode code points is the same as the code point itself. For these, and for code points above the legal Unicode maximum, this returns the input code point unchanged. It additionally stores the UTF-8 of the result into the buffer beginning at "s", and its length in bytes into *lenp. The caller must have made "s" large enough to contain at least "UTF8_MAXBYTES_CASE+1" bytes to avoid possible overflow.

    NOTE: the uppercase of a code point may be more than one code point. The return value of this function is only the first of these. The entire uppercase is returned in "s". To determine if the result is more than a single code point, you can do something like this:

     uc = toUPPER_uvchr(cp, s, &len);
     if (len > UTF8SKIP(s)) { is multiple code points }
     else { is a single code point }

    "toUPPER_utf8" and "toUPPER_utf8_safe" are synonyms of each other. The only difference between these and "toUPPER_uvchr" is that the source for these is encoded in UTF-8, instead of being a code point. It is passed as a buffer starting at "p", with "e" pointing to one byte beyond its end. The "p" buffer may certainly contain more than one code point; but only the first one (up through "e - 1") is examined. If the UTF-8 for the input character is malformed in some way, the program may croak, or the function may return the REPLACEMENT CHARACTER, at the discretion of the implementation, and subject to change in future releases.

     UV  toUPPER          (UV cp)
     UV  toUPPER_A        (UV cp)
     UV  toUPPER_utf8     (U8* p, U8* e, U8* s, STRLEN* lenp)
     UV  toUPPER_utf8_safe(U8* p, U8* e, U8* s, STRLEN* lenp)
     UV  toUPPER_uvchr    (UV cp, U8* s, STRLEN* lenp)

Character classification
This section is about functions (really macros) that classify characters into types, such as punctuation versus alphabetic, etc. Most of these are analogous to regular expression character classes. (See "POSIX Character Classes" in perlrecharclass.) There are several variants for each class. (Not all macros have all variants; each item below lists the ones valid for it.) None are affected by "use bytes", and only the ones with "LC" in the name are affected by the current locale.

The base function, e.g., isALPHA(), takes any signed or unsigned value, treating it as a code point, and returns a boolean as to whether or not the character represented by it is (or on non-ASCII platforms, corresponds to) an ASCII character in the named class based on platform, Unicode, and Perl rules. If the input is a number that doesn't fit in an octet, FALSE is returned.

Variant "isFOO_A" (e.g., isALPHA_A()) is identical to the base function with no suffix "_A". This variant is used to emphasize by its name that only ASCII-range characters can return TRUE.

Variant "isFOO_L1" imposes the Latin-1 (or EBCDIC equivalent) character set onto the platform. That is, the code points that are ASCII are unaffected, since ASCII is a subset of Latin-1. But the non-ASCII code points are treated as if they are Latin-1 characters. For example, isWORDCHAR_L1() will return true when called with the code point 0xDF, which is a word character in both ASCII and EBCDIC (though it represents different characters in each). If the input is a number that doesn't fit in an octet, FALSE is returned. (Perl's documentation uses a colloquial definition of Latin-1, to include all code points below 256.)

Variant "isFOO_uvchr" is exactly like the "isFOO_L1" variant, for inputs below 256, but if the code point is larger than 255, Unicode rules are used to determine if it is in the character class. For example, isWORDCHAR_uvchr(0x100) returns TRUE, since 0x100 is LATIN CAPITAL LETTER A WITH MACRON in Unicode, and is a word character.

Variants "isFOO_utf8" and "isFOO_utf8_safe" are like "isFOO_uvchr", but are used for UTF-8 encoded strings. The two forms are different names for the same thing. Each call to one of these classifies the first character of the string starting at "p". The second parameter, "e", points to anywhere in the string beyond the first character, up to one byte past the end of the entire string. Although both variants are identical, the suffix "_safe" in one name emphasizes that it will not attempt to read beyond "e - 1", provided that the constraint "s < e" is true (this is asserted for in "-DDEBUGGING" builds). If the UTF-8 for the input character is malformed in some way, the program may croak, or the function may return FALSE, at the discretion of the implementation, and subject to change in future releases.

Variant "isFOO_LC" is like the "isFOO_A" and "isFOO_L1" variants, but the result is based on the current locale, which is what "LC" in the name stands for. If Perl can determine that the current locale is a UTF-8 locale, it uses the published Unicode rules; otherwise, it uses the C library function that gives the named classification. For example, isDIGIT_LC() when not in a UTF-8 locale returns the result of calling isdigit(). FALSE is always returned if the input won't fit into an octet. On some platforms where the C library function is known to be defective, Perl changes its result to follow the POSIX standard's rules.

Variant "isFOO_LC_uvchr" acts exactly like "isFOO_LC" for inputs less than 256, but for larger ones it returns the Unicode classification of the code point.

Variants "isFOO_LC_utf8" and "isFOO_LC_utf8_safe" are like "isFOO_LC_uvchr", but are used for UTF-8 encoded strings. The two forms are different names for the same thing. Each call to one of these classifies the first character of the string starting at "p". The second parameter, "e", points to anywhere in the string beyond the first character, up to one byte past the end of the entire string. Although both variants are identical, the suffix "_safe" in one name emphasizes that it will not attempt to read beyond "e - 1", provided that the constraint "s < e" is true (this is asserted for in "-DDEBUGGING" builds). If the UTF-8 for the input character is malformed in some way, the program may croak, or the function may return FALSE, at the discretion of the implementation, and subject to change in future releases.

"isALNUM"
"isALNUM_A"
"isALNUM_LC"
"isALNUM_LC_uvchr"
    These are each a synonym for their respectively named ""isWORDCHAR"" variant.

    They are provided for backward compatibility, even though a word character includes more than the standard C language meaning of alphanumeric. To get the C language definition, use the corresponding ""isALPHANUMERIC"" variant.

     bool  isALNUM         (UV ch)
     bool  isALNUM_A       (UV ch)
     bool  isALNUM_LC      (UV ch)
     bool  isALNUM_LC_uvchr(UV ch)

"isALNUMC"
"isALNUMC_A"
"isALNUMC_LC"
"isALNUMC_LC_uvchr"
"isALNUMC_L1"
    These are discouraged, backward compatibility macros for ""isALPHANUMERIC"". That is, each returns a boolean indicating whether the specified character is one of "[A-Za-z0-9]", analogous to "m/[[:alnum:]]/".

    The "C" suffix in the names was meant to indicate that they correspond to the C language "isalnum(3)".

     bool  isALNUMC         (UV ch)
     bool  isALNUMC_A       (UV ch)
     bool  isALNUMC_LC      (UV ch)
     bool  isALNUMC_LC_uvchr(UV ch)
     bool  isALNUMC_L1      (UV ch)

"isALPHA"
"isALPHA_A"
"isALPHA_LC"
"isALPHA_LC_utf8_safe"
"isALPHA_LC_uvchr"
"isALPHA_L1"
"isALPHA_utf8"
"isALPHA_utf8_safe"
"isALPHA_uvchr"
    Returns a boolean indicating whether the specified input is one of "[A-Za-z]", analogous to "m/[[:alpha:]]/". See the top of this section for an explanation of the variants.

     bool  isALPHA             (UV ch)
     bool  isALPHA_A           (UV ch)
     bool  isALPHA_LC          (UV ch)
     bool  isALPHA_LC_utf8_safe(U8 * s, U8 *end)
     bool  isALPHA_LC_uvchr    (UV ch)
     bool  isALPHA_L1          (UV ch)
     bool  isALPHA_utf8        (U8 * s, U8 * end)
     bool  isALPHA_utf8_safe   (U8 * s, U8 * end)
     bool  isALPHA_uvchr       (UV ch)

"isALPHANUMERIC"
"isALPHANUMERIC_A"
"isALPHANUMERIC_LC"
"isALPHANUMERIC_LC_utf8_safe"
"isALPHANUMERIC_LC_uvchr"
"isALPHANUMERIC_L1"
"isALPHANUMERIC_utf8"
"isALPHANUMERIC_utf8_safe"
"isALPHANUMERIC_uvchr"
    Returns a boolean indicating whether the specified character is one of "[A-Za-z0-9]", analogous to "m/[[:alnum:]]/". See the top of this section for an explanation of the variants.

     bool  isALPHANUMERIC             (UV ch)
     bool  isALPHANUMERIC_A           (UV ch)
     bool  isALPHANUMERIC_LC          (UV ch)
     bool  isALPHANUMERIC_LC_utf8_safe(U8 * s, U8 *end)
     bool  isALPHANUMERIC_LC_uvchr    (UV ch)
     bool  isALPHANUMERIC_L1          (UV ch)
     bool  isALPHANUMERIC_utf8        (U8 * s, U8 * end)
     bool  isALPHANUMERIC_utf8_safe   (U8 * s, U8 * end)
     bool  isALPHANUMERIC_uvchr       (UV ch)

"isASCII"
"isASCII_A"
"isASCII_LC"
"isASCII_LC_utf8_safe"
"isASCII_LC_uvchr"
"isASCII_L1"
"isASCII_utf8"
"isASCII_utf8_safe"
"isASCII_uvchr"
    Returns a boolean indicating whether the specified character is one of the 128 characters in the ASCII character set, analogous to "m/[[:ascii:]]/". On non-ASCII platforms, it returns TRUE iff this character corresponds to an ASCII character. Variants isASCII_A() and isASCII_L1() are identical to isASCII(). See the top of this section for an explanation of the variants. Note, however, that some platforms do not have the C library routine isascii(). In these cases, the variants whose names contain "LC" are the same as the corresponding ones without.

    Also note, that because all ASCII characters are UTF-8 invariant (meaning they have the exact same representation (always a single byte) whether encoded in UTF-8 or not), "isASCII" will give the correct results when called with any byte in any string encoded or not in UTF-8. And similarly "isASCII_utf8" and "isASCII_utf8_safe" will work properly on any string encoded or not in UTF-8.

     bool  isASCII             (UV ch)
     bool  isASCII_A           (UV ch)
     bool  isASCII_LC          (UV ch)
     bool  isASCII_LC_utf8_safe(U8 * s, U8 *end)
     bool  isASCII_LC_uvchr    (UV ch)
     bool  isASCII_L1          (UV ch)
     bool  isASCII_utf8        (U8 * s, U8 * end)
     bool  isASCII_utf8_safe   (U8 * s, U8 * end)
     bool  isASCII_uvchr       (UV ch)

"isBLANK"
"isBLANK_A"
"isBLANK_LC"
"isBLANK_LC_utf8_safe"
"isBLANK_LC_uvchr"
"isBLANK_L1"
"isBLANK_utf8"
"isBLANK_utf8_safe"
"isBLANK_uvchr"
    Returns a boolean indicating whether the specified character is a character considered to be a blank, analogous to "m/[[:blank:]]/". See the top of this section for an explanation of the variants. Note, however, that some platforms do not have the C library routine isblank(). In these cases, the variants whose names contain "LC" are the same as the corresponding ones without.

     bool  isBLANK             (UV ch)
     bool  isBLANK_A           (UV ch)
     bool  isBLANK_LC          (UV ch)
     bool  isBLANK_LC_utf8_safe(U8 * s, U8 *end)
     bool  isBLANK_LC_uvchr    (UV ch)
     bool  isBLANK_L1          (UV ch)
     bool  isBLANK_utf8        (U8 * s, U8 * end)
     bool  isBLANK_utf8_safe   (U8 * s, U8 * end)
     bool  isBLANK_uvchr       (UV ch)

"isCNTRL"
"isCNTRL_A"
"isCNTRL_LC"
"isCNTRL_LC_utf8_safe"
"isCNTRL_LC_uvchr"
"isCNTRL_L1"
"isCNTRL_utf8"
"isCNTRL_utf8_safe"
"isCNTRL_uvchr"
    Returns a boolean indicating whether the specified character is a control character, analogous to "m/[[:cntrl:]]/". See the top of this section for an explanation of the variants. On EBCDIC platforms, you almost always want to use the "isCNTRL_L1" variant.

     bool  isCNTRL             (UV ch)
     bool  isCNTRL_A           (UV ch)
     bool  isCNTRL_LC          (UV ch)
     bool  isCNTRL_LC_utf8_safe(U8 * s, U8 *end)
     bool  isCNTRL_LC_uvchr    (UV ch)
     bool  isCNTRL_L1          (UV ch)
     bool  isCNTRL_utf8        (U8 * s, U8 * end)
     bool  isCNTRL_utf8_safe   (U8 * s, U8 * end)
     bool  isCNTRL_uvchr       (UV ch)

"isDIGIT"
"isDIGIT_A"
"isDIGIT_LC"
"isDIGIT_LC_utf8_safe"
"isDIGIT_LC_uvchr"
"isDIGIT_L1"
"isDIGIT_utf8"
"isDIGIT_utf8_safe"
"isDIGIT_uvchr"
    Returns a boolean indicating whether the specified character is a digit, analogous to "m/[[:digit:]]/". Variants "isDIGIT_A" and "isDIGIT_L1" are identical to "isDIGIT". See the top of this section for an explanation of the variants.

     bool  isDIGIT             (UV ch)
     bool  isDIGIT_A           (UV ch)
     bool  isDIGIT_LC          (UV ch)
     bool  isDIGIT_LC_utf8_safe(U8 * s, U8 *end)
     bool  isDIGIT_LC_uvchr    (UV ch)
     bool  isDIGIT_L1          (UV ch)
     bool  isDIGIT_utf8        (U8 * s, U8 * end)
     bool  isDIGIT_utf8_safe   (U8 * s, U8 * end)
     bool  isDIGIT_uvchr       (UV ch)

"isGRAPH"
"isGRAPH_A"
"isGRAPH_LC"
"isGRAPH_LC_utf8_safe"
"isGRAPH_LC_uvchr"
"isGRAPH_L1"
"isGRAPH_utf8"
"isGRAPH_utf8_safe"
"isGRAPH_uvchr"
    Returns a boolean indicating whether the specified character is a graphic character, analogous to "m/[[:graph:]]/". See the top of this section for an explanation of the variants.

     bool  isGRAPH             (UV ch)
     bool  isGRAPH_A           (UV ch)
     bool  isGRAPH_LC          (UV ch)
     bool  isGRAPH_LC_utf8_safe(U8 * s, U8 *end)
     bool  isGRAPH_LC_uvchr    (UV ch)
     bool  isGRAPH_L1          (UV ch)
     bool  isGRAPH_utf8        (U8 * s, U8 * end)
     bool  isGRAPH_utf8_safe   (U8 * s, U8 * end)
     bool  isGRAPH_uvchr       (UV ch)

"isIDCONT"
"isIDCONT_A"
"isIDCONT_LC"
"isIDCONT_LC_utf8_safe"
"isIDCONT_LC_uvchr"
"isIDCONT_L1"
"isIDCONT_utf8"
"isIDCONT_utf8_safe"
"isIDCONT_uvchr"
    Returns a boolean indicating whether the specified character can be the second or succeeding character of an identifier. This is very close to, but not quite the same as the official Unicode property "XID_Continue". The difference is that this returns true only if the input character also matches "isWORDCHAR". See the top of this section for an explanation of the variants.

     bool  isIDCONT             (UV ch)
     bool  isIDCONT_A           (UV ch)
     bool  isIDCONT_LC          (UV ch)
     bool  isIDCONT_LC_utf8_safe(U8 * s, U8 *end)
     bool  isIDCONT_LC_uvchr    (UV ch)
     bool  isIDCONT_L1          (UV ch)
     bool  isIDCONT_utf8        (U8 * s, U8 * end)
     bool  isIDCONT_utf8_safe   (U8 * s, U8 * end)
     bool  isIDCONT_uvchr       (UV ch)

"isIDFIRST"
"isIDFIRST_A"
"isIDFIRST_LC"
"isIDFIRST_LC_utf8_safe"
"isIDFIRST_LC_uvchr"
"isIDFIRST_L1"
"isIDFIRST_utf8"
"isIDFIRST_utf8_safe"
"isIDFIRST_uvchr"
    Returns a boolean indicating whether the specified character can be the first character of an identifier. This is very close to, but not quite the same as the official Unicode property "XID_Start". The difference is that this returns true only if the input character also matches "isWORDCHAR". See the top of this section for an explanation of the variants.

     bool  isIDFIRST             (UV ch)
     bool  isIDFIRST_A           (UV ch)
     bool  isIDFIRST_LC          (UV ch)
     bool  isIDFIRST_LC_utf8_safe(U8 * s, U8 *end)
     bool  isIDFIRST_LC_uvchr    (UV ch)
     bool  isIDFIRST_L1          (UV ch)
     bool  isIDFIRST_utf8        (U8 * s, U8 * end)
     bool  isIDFIRST_utf8_safe   (U8 * s, U8 * end)
     bool  isIDFIRST_uvchr       (UV ch)

"isLOWER"
"isLOWER_A"
"isLOWER_LC"
"isLOWER_LC_utf8_safe"
"isLOWER_LC_uvchr"
"isLOWER_L1"
"isLOWER_utf8"
"isLOWER_utf8_safe"
"isLOWER_uvchr"
    Returns a boolean indicating whether the specified character is a lowercase character, analogous to "m/[[:lower:]]/". See the top of this section for an explanation of the variants

     bool  isLOWER             (UV ch)
     bool  isLOWER_A           (UV ch)
     bool  isLOWER_LC          (UV ch)
     bool  isLOWER_LC_utf8_safe(U8 * s, U8 *end)
     bool  isLOWER_LC_uvchr    (UV ch)
     bool  isLOWER_L1          (UV ch)
     bool  isLOWER_utf8        (U8 * s, U8 * end)
     bool  isLOWER_utf8_safe   (U8 * s, U8 * end)
     bool  isLOWER_uvchr       (UV ch)

"isOCTAL"
"isOCTAL_A"
"isOCTAL_L1"
    Returns a boolean indicating whether the specified character is an octal digit, [0-7]. The only two variants are "isOCTAL_A" and "isOCTAL_L1"; each is identical to "isOCTAL".

     bool  isOCTAL   (UV ch)
     bool  isOCTAL_A (UV ch)
     bool  isOCTAL_L1(UV ch)

"isPRINT"
"isPRINT_A"
"isPRINT_LC"
"isPRINT_LC_utf8_safe"
"isPRINT_LC_uvchr"
"isPRINT_L1"
"isPRINT_utf8"
"isPRINT_utf8_safe"
"isPRINT_uvchr"
    Returns a boolean indicating whether the specified character is a printable character, analogous to "m/[[:print:]]/". See the top of this section for an explanation of the variants.

     bool  isPRINT             (UV ch)
     bool  isPRINT_A           (UV ch)
     bool  isPRINT_LC          (UV ch)
     bool  isPRINT_LC_utf8_safe(U8 * s, U8 *end)
     bool  isPRINT_LC_uvchr    (UV ch)
     bool  isPRINT_L1          (UV ch)
     bool  isPRINT_utf8        (U8 * s, U8 * end)
     bool  isPRINT_utf8_safe   (U8 * s, U8 * end)
     bool  isPRINT_uvchr       (UV ch)

"isPSXSPC"
"isPSXSPC_A"
"isPSXSPC_LC"
"isPSXSPC_LC_utf8_safe"
"isPSXSPC_LC_uvchr"
"isPSXSPC_L1"
"isPSXSPC_utf8"
"isPSXSPC_utf8_safe"
"isPSXSPC_uvchr"
    (short for Posix Space) Starting in 5.18, this is identical in all its forms to the corresponding isSPACE() macros. The locale forms of this macro are identical to their corresponding isSPACE() forms in all Perl releases. In releases prior to 5.18, the non-locale forms differ from their isSPACE() forms only in that the isSPACE() forms don't match a Vertical Tab, and the isPSXSPC() forms do. Otherwise they are identical. Thus this macro is analogous to what "m/[[:space:]]/" matches in a regular expression. See the top of this section for an explanation of the variants.

     bool  isPSXSPC             (UV ch)
     bool  isPSXSPC_A           (UV ch)
     bool  isPSXSPC_LC          (UV ch)
     bool  isPSXSPC_LC_utf8_safe(U8 * s, U8 *end)
     bool  isPSXSPC_LC_uvchr    (UV ch)
     bool  isPSXSPC_L1          (UV ch)
     bool  isPSXSPC_utf8        (U8 * s, U8 * end)
     bool  isPSXSPC_utf8_safe   (U8 * s, U8 * end)
     bool  isPSXSPC_uvchr       (UV ch)

"isPUNCT"
"isPUNCT_A"
"isPUNCT_LC"
"isPUNCT_LC_utf8_safe"
"isPUNCT_LC_uvchr"
"isPUNCT_L1"
"isPUNCT_utf8"
"isPUNCT_utf8_safe"
"isPUNCT_uvchr"
    Returns a boolean indicating whether the specified character is a punctuation character, analogous to "m/[[:punct:]]/". Note that the definition of what is punctuation isn't as straightforward as one might desire. See "POSIX Character Classes" in perlrecharclass for details. See the top of this section for an explanation of the variants.

     bool  isPUNCT             (UV ch)
     bool  isPUNCT_A           (UV ch)
     bool  isPUNCT_LC          (UV ch)
     bool  isPUNCT_LC_utf8_safe(U8 * s, U8 *end)
     bool  isPUNCT_LC_uvchr    (UV ch)
     bool  isPUNCT_L1          (UV ch)
     bool  isPUNCT_utf8        (U8 * s, U8 * end)
     bool  isPUNCT_utf8_safe   (U8 * s, U8 * end)
     bool  isPUNCT_uvchr       (UV ch)

"isSPACE"
"isSPACE_A"
"isSPACE_LC"
"isSPACE_LC_utf8_safe"
"isSPACE_LC_uvchr"
"isSPACE_L1"
"isSPACE_utf8"
"isSPACE_utf8_safe"
"isSPACE_uvchr"
    Returns a boolean indicating whether the specified character is a whitespace character. This is analogous to what "m/\s/" matches in a regular expression. Starting in Perl 5.18 this also matches what "m/[[:space:]]/" does. Prior to 5.18, only the locale forms of this macro (the ones with "LC" in their names) matched precisely what "m/[[:space:]]/" does. In those releases, the only difference, in the non-locale variants, was that isSPACE() did not match a vertical tab. (See "isPSXSPC" for a macro that matches a vertical tab in all releases.) See the top of this section for an explanation of the variants.

     bool  isSPACE             (UV ch)
     bool  isSPACE_A           (UV ch)
     bool  isSPACE_LC          (UV ch)
     bool  isSPACE_LC_utf8_safe(U8 * s, U8 *end)
     bool  isSPACE_LC_uvchr    (UV ch)
     bool  isSPACE_L1          (UV ch)
     bool  isSPACE_utf8        (U8 * s, U8 * end)
     bool  isSPACE_utf8_safe   (U8 * s, U8 * end)
     bool  isSPACE_uvchr       (UV ch)

"isUPPER"
"isUPPER_A"
"isUPPER_LC"
"isUPPER_LC_utf8_safe"
"isUPPER_LC_uvchr"
"isUPPER_L1"
"isUPPER_utf8"
"isUPPER_utf8_safe"
"isUPPER_uvchr"
    Returns a boolean indicating whether the specified character is an uppercase character, analogous to "m/[[:upper:]]/". See the top of this section for an explanation of the variants.

     bool  isUPPER             (UV ch)
     bool  isUPPER_A           (UV ch)
     bool  isUPPER_LC          (UV ch)
     bool  isUPPER_LC_utf8_safe(U8 * s, U8 *end)
     bool  isUPPER_LC_uvchr    (UV ch)
     bool  isUPPER_L1          (UV ch)
     bool  isUPPER_utf8        (U8 * s, U8 * end)
     bool  isUPPER_utf8_safe   (U8 * s, U8 * end)
     bool  isUPPER_uvchr       (UV ch)

"isWORDCHAR"
"isWORDCHAR_A"
"isWORDCHAR_LC"
"isWORDCHAR_LC_utf8_safe"
"isWORDCHAR_LC_uvchr"
"isWORDCHAR_L1"
"isWORDCHAR_utf8"
"isWORDCHAR_utf8_safe"
"isWORDCHAR_uvchr"
    Returns a boolean indicating whether the specified character is a character that is a word character, analogous to what "m/\w/" and "m/[[:word:]]/" match in a regular expression. A word character is an alphabetic character, a decimal digit, a connecting punctuation character (such as an underscore), or a "mark" character that attaches to one of those (like some sort of accent).

    See the top of this section for an explanation of the variants.

    "isWORDCHAR_A", "isWORDCHAR_L1", "isWORDCHAR_uvchr", "isWORDCHAR_LC", "isWORDCHAR_LC_uvchr", "isWORDCHAR_LC_utf8", and "isWORDCHAR_LC_utf8_safe" are also as described there, but additionally include the platform's native underscore.

     bool  isWORDCHAR             (UV ch)
     bool  isWORDCHAR_A           (UV ch)
     bool  isWORDCHAR_LC          (UV ch)
     bool  isWORDCHAR_LC_utf8_safe(U8 * s, U8 *end)
     bool  isWORDCHAR_LC_uvchr    (UV ch)
     bool  isWORDCHAR_L1          (UV ch)
     bool  isWORDCHAR_utf8        (U8 * s, U8 * end)
     bool  isWORDCHAR_utf8_safe   (U8 * s, U8 * end)
     bool  isWORDCHAR_uvchr       (UV ch)

"isXDIGIT"
"isXDIGIT_A"
"isXDIGIT_LC"
"isXDIGIT_LC_utf8_safe"
"isXDIGIT_LC_uvchr"
"isXDIGIT_L1"
"isXDIGIT_utf8"
"isXDIGIT_utf8_safe"
"isXDIGIT_uvchr"
    Returns a boolean indicating whether the specified character is a hexadecimal digit. In the ASCII range these are "[0-9A-Fa-f]". Variants isXDIGIT_A() and isXDIGIT_L1() are identical to isXDIGIT(). See the top of this section for an explanation of the variants.

     bool  isXDIGIT             (UV ch)
     bool  isXDIGIT_A           (UV ch)
     bool  isXDIGIT_LC          (UV ch)
     bool  isXDIGIT_LC_utf8_safe(U8 * s, U8 *end)
     bool  isXDIGIT_LC_uvchr    (UV ch)
     bool  isXDIGIT_L1          (UV ch)
     bool  isXDIGIT_utf8        (U8 * s, U8 * end)
     bool  isXDIGIT_utf8_safe   (U8 * s, U8 * end)
     bool  isXDIGIT_uvchr       (UV ch)

Compiler and Preprocessor information

"CPPLAST"
    This symbol is intended to be used along with "CPPRUN" in the same manner symbol "CPPMINUS" is used with "CPPSTDIN". It contains either "-" or "".

"CPPMINUS"
    This symbol contains the second part of the string which will invoke the C preprocessor on the standard input and produce to standard output. This symbol will have the value "-" if "CPPSTDIN" needs a minus to specify standard input, otherwise the value is "".

"CPPRUN"
    This symbol contains the string which will invoke a C preprocessor on the standard input and produce to standard output. It needs to end with "CPPLAST", after all other preprocessor flags have been specified. The main difference with "CPPSTDIN" is that this program will never be a pointer to a shell wrapper, i.e. it will be empty if no preprocessor is available directly to the user. Note that it may well be different from the preprocessor used to compile the C program.

"CPPSTDIN"
    This symbol contains the first part of the string which will invoke the C preprocessor on the standard input and produce to standard output. Typical value of "cc -E" or "/lib/cpp", but it can also call a wrapper. See "CPPRUN".

"HAS_BUILTIN_ADD_OVERFLOW"
    This symbol, if defined, indicates that the compiler supports "__builtin_add_overflow" for adding integers with overflow checks.

"HAS_BUILTIN_CHOOSE_EXPR"
    Can we handle "GCC" builtin for compile-time ternary-like expressions

"HAS_BUILTIN_EXPECT"
    Can we handle "GCC" builtin for telling that certain values are more likely

"HAS_BUILTIN_MUL_OVERFLOW"
    This symbol, if defined, indicates that the compiler supports "__builtin_mul_overflow" for multiplying integers with overflow checks.

"HAS_BUILTIN_SUB_OVERFLOW"
    This symbol, if defined, indicates that the compiler supports "__builtin_sub_overflow" for subtracting integers with overflow checks.

"HAS_C99_VARIADIC_MACROS"
    If defined, the compiler supports C99 variadic macros.

"HAS_STATIC_INLINE"
    This symbol, if defined, indicates that the C compiler supports C99-style static inline. That is, the function can't be called from another translation unit.

"HASATTRIBUTE_ALWAYS_INLINE"
    Can we handle "GCC" attribute for functions that should always be inlined.

"HASATTRIBUTE_DEPRECATED"
    Can we handle "GCC" attribute for marking deprecated "APIs"

"HASATTRIBUTE_FORMAT"
    Can we handle "GCC" attribute for checking printf-style formats

"HASATTRIBUTE_NONNULL"
    Can we handle "GCC" attribute for nonnull function parms.

"HASATTRIBUTE_NORETURN"
    Can we handle "GCC" attribute for functions that do not return

"HASATTRIBUTE_PURE"
    Can we handle "GCC" attribute for pure functions

"HASATTRIBUTE_UNUSED"
    Can we handle "GCC" attribute for unused variables and arguments

"HASATTRIBUTE_VISIBILITY"
    Can we handle "GCC" attribute for functions that should have a different visibility.

"HASATTRIBUTE_WARN_UNUSED_RESULT"
    Can we handle "GCC" attribute for warning on unused results

"MEM_ALIGNBYTES"
    This symbol contains the number of bytes required to align a double, or a long double when applicable. Usual values are 2, 4 and 8. The default is eight, for safety. For cross-compiling or multiarch support, Configure will set a minimum of 8.

"PERL_STATIC_INLINE"
    This symbol gives the best-guess incantation to use for static inline functions. If "HAS_STATIC_INLINE" is defined, this will give C99-style inline. If "HAS_STATIC_INLINE" is not defined, this will give a plain 'static'. It will always be defined to something that gives static linkage. Possibilities include

     static inline       (c99)
     static __inline__   (gcc -ansi)
     static __inline     (MSVC)
     static _inline      (older MSVC)
     static              (c89 compilers)

"PERL_THREAD_LOCAL"
    This symbol, if defined, gives a linkage specification for thread-local storage. For example, for a C11 compiler this will be "_Thread_local". Beware, some compilers are sensitive to the C language standard they are told to parse. For example, suncc defaults to C11, so our probe will report that "_Thread_local" can be used. However, if the -std=c99 is later added to the compiler flags, then "_Thread_local" will become a syntax error. Hence it is important for these flags to be consistent between probing and use.

"U32_ALIGNMENT_REQUIRED"
    This symbol, if defined, indicates that you must access character data through U32-aligned pointers.

Compiler directives

"__ASSERT_"
    This is a helper macro to avoid preprocessor issues, replaced by nothing unless under DEBUGGING, where it expands to an assert of its argument, followed by a comma (hence the comma operator). If we just used a straight assert(), we would get a comma with nothing before it when not DEBUGGING.

       __ASSERT_(bool expr)

"ASSUME"
    "ASSUME" is like assert(), but it has a benefit in a release build. It is a hint to a compiler about a statement of fact in a function call free expression, which allows the compiler to generate better machine code. In a debug build, ASSUME(x) is a synonym for assert(x). ASSUME(0) means the control path is unreachable. In a for loop, "ASSUME" can be used to hint that a loop will run at least X times. "ASSUME" is based off MSVC's "__assume" intrinsic function, see its documents for more details.

       ASSUME(bool expr)

"dNOOP"
    Declare nothing; typically used as a placeholder to replace something that used to declare something. Works on compilers that require declarations before any code.

       dNOOP;

"END_EXTERN_C"
    When not compiling using C++, expands to nothing. Otherwise ends a section of code already begun by a "START_EXTERN_C".

"EXTERN_C"
    When not compiling using C++, expands to nothing. Otherwise is used in a declaration of a function to indicate the function should have external C linkage. This is required for things to work for just about all functions with external linkage compiled into perl. Often, you can use "START_EXTERN_C" ... "END_EXTERN_C" blocks surrounding all your code that you need to have this linkage.

    Example usage:

     EXTERN_C int flock(int fd, int op);

"LIKELY"
    Returns the input unchanged, but at the same time it gives a branch prediction hint to the compiler that this condition is likely to be true.

       LIKELY(bool expr)

"NOOP"
    Do nothing; typically used as a placeholder to replace something that used to do something.

       NOOP;

"PERL_UNUSED_ARG"
    This is used to suppress compiler warnings that a parameter to a function is not used. This situation can arise, for example, when a parameter is needed under some configuration conditions, but not others, so that C preprocessor conditional compilation causes it be used just sometimes.

       PERL_UNUSED_ARG(void x);

"PERL_UNUSED_CONTEXT"
    This is used to suppress compiler warnings that the thread context parameter to a function is not used. This situation can arise, for example, when a C preprocessor conditional compilation causes it be used just some times.

       PERL_UNUSED_CONTEXT;

"PERL_UNUSED_DECL"
    Tells the compiler that the parameter in the function prototype just before it is not necessarily expected to be used in the function. Not that many compilers understand this, so this should only be used in cases where "PERL_UNUSED_ARG" can't conveniently be used.

    Example usage:

     Signal_t
     Perl_perly_sighandler(int sig, Siginfo_t *sip PERL_UNUSED_DECL,
                           void *uap PERL_UNUSED_DECL, bool safe)

"PERL_UNUSED_RESULT"
    This macro indicates to discard the return value of the function call inside it, e.g.,

     PERL_UNUSED_RESULT(foo(a, b))

    The main reason for this is that the combination of "gcc -Wunused-result" (part of "-Wall") and the "__attribute__((warn_unused_result))" cannot be silenced with casting to "void". This causes trouble when the system header files use the attribute.

    Use "PERL_UNUSED_RESULT" sparingly, though, since usually the warning is there for a good reason: you might lose success/failure information, or leak resources, or changes in resources.

    But sometimes you just want to ignore the return value, e.g., on codepaths soon ending up in abort, or in "best effort" attempts, or in situations where there is no good way to handle failures.

    Sometimes "PERL_UNUSED_RESULT" might not be the most natural way: another possibility is that you can capture the return value and use "PERL_UNUSED_VAR" on that.

       PERL_UNUSED_RESULT(void x)

"PERL_UNUSED_VAR"
    This is used to suppress compiler warnings that the variable x is not used. This situation can arise, for example, when a C preprocessor conditional compilation causes it be used just some times.

       PERL_UNUSED_VAR(void x);

"START_EXTERN_C"
    When not compiling using C++, expands to nothing. Otherwise begins a section of code in which every function will effectively have "EXTERN_C" applied to it, that is to have external C linkage. The section is ended by a "END_EXTERN_C".

"STATIC"
    Described in perlguts.

"STMT_START"
"STMT_END"
    These allow a series of statements in a macro to be used as a single statement, as in

     if (x) STMT_START { ... } STMT_END else ...

    Note that you can't return a value out of this construct and cannot use it as an operand to the comma operator. These limit its utility.

    But, a value could be returned by constructing the API so that a pointer is passed and the macro dereferences this to set the return. If the value can be any of various types, depending on context, you can handle that situation in some situations by adding the type of the return as an extra accompanying parameter:

     #define foo(param, type)  STMT_START {
                                  type * param; *param = do_calc; ...
                               } STMT_END

    This could be awkward, so consider instead using a C language "static inline" function.

    If you do use this construct, it is easy to forget that it is a macro and not a function, and hence fall into traps that might not show up until someone someday writes code which contains names that clash with the ones you chose here, or calls it with a parameter which is an expression with side effects, the consequences of which you didn't think about. See "Writing safer macros" in perlhacktips for how to avoid these.

"UNLIKELY"
    Returns the input unchanged, but at the same time it gives a branch prediction hint to the compiler that this condition is likely to be false.

       UNLIKELY(bool expr)

Compile-time scope hooks

"BhkDISABLE"
    NOTE: "BhkDISABLE" is experimental and may change or be removed without notice.

    Temporarily disable an entry in this BHK structure, by clearing the appropriate flag. "which" is a preprocessor token indicating which entry to disable.

     void  BhkDISABLE(BHK *hk, token which)

"BhkENABLE"
    NOTE: "BhkENABLE" is experimental and may change or be removed without notice.

    Re-enable an entry in this BHK structure, by setting the appropriate flag. "which" is a preprocessor token indicating which entry to enable. This will assert (under -DDEBUGGING) if the entry doesn't contain a valid pointer.

     void  BhkENABLE(BHK *hk, token which)

"BhkENTRY_set"
    NOTE: "BhkENTRY_set" is experimental and may change or be removed without notice.

    Set an entry in the BHK structure, and set the flags to indicate it is valid. "which" is a preprocessing token indicating which entry to set. The type of "ptr" depends on the entry.

     void  BhkENTRY_set(BHK *hk, token which, void *ptr)

"blockhook_register"
    NOTE: "blockhook_register" is experimental and may change or be removed without notice.

    Register a set of hooks to be called when the Perl lexical scope changes at compile time. See "Compile-time scope hooks" in perlguts.

     void  Perl_blockhook_register(pTHX_ BHK *hk)

Concurrency

"aTHX"
"aTHX_"
    Described in perlguts.

"CPERLscope"
    "DEPRECATED!" It is planned to remove "CPERLscope" from a future release of Perl. Do not use it for new code; remove it from existing code.

    Now a no-op.

     void  CPERLscope(void x)

"dTHR"
"dTHX"
    Described in perlguts.

"dTHXa"
    On threaded perls, set "pTHX" to "a"; on unthreaded perls, do nothing

"dTHXoa"
    Now a synonym for "dTHXa".

"dVAR"
    This is now a synonym for dNOOP: declare nothing

"GETENV_PRESERVES_OTHER_THREAD"
    This symbol, if defined, indicates that the getenv system call doesn't zap the static buffer of getenv() in a different thread. The typical getenv() implementation will return a pointer to the proper position in **environ. But some may instead copy them to a static buffer in getenv(). If there is a per-thread instance of that buffer, or the return points to **environ, then a many-reader/1-writer mutex will work; otherwise an exclusive locking mutex is required to prevent races.

"HAS_PTHREAD_ATFORK"
    This symbol, if defined, indicates that the "pthread_atfork" routine is available to setup fork handlers.

"HAS_PTHREAD_ATTR_SETSCOPE"
    This symbol, if defined, indicates that the "pthread_attr_setscope" system call is available to set the contention scope attribute of a thread attribute object.

"HAS_PTHREAD_YIELD"
    This symbol, if defined, indicates that the "pthread_yield" routine is available to yield the execution of the current thread. "sched_yield" is preferable to "pthread_yield".

"HAS_SCHED_YIELD"
    This symbol, if defined, indicates that the "sched_yield" routine is available to yield the execution of the current thread. "sched_yield" is preferable to "pthread_yield".

"I_MACH_CTHREADS"
    This symbol, if defined, indicates to the C program that it should include mach/cthreads.h.

     #ifdef I_MACH_CTHREADS
         #include <mach_cthreads.h>
     #endif

"I_PTHREAD"
    This symbol, if defined, indicates to the C program that it should include pthread.h.

     #ifdef I_PTHREAD
         #include <pthread.h>
     #endif

"MULTIPLICITY"
    This symbol, if defined, indicates that Perl should be built to use multiplicity.

"OLD_PTHREAD_CREATE_JOINABLE"
    This symbol, if defined, indicates how to create pthread in joinable (aka undetached) state. "NOTE": not defined if pthread.h already has defined "PTHREAD_CREATE_JOINABLE" (the new version of the constant). If defined, known values are "PTHREAD_CREATE_UNDETACHED" and "__UNDETACHED".

"OLD_PTHREADS_API"
    This symbol, if defined, indicates that Perl should be built to use the old draft "POSIX" threads "API".

"PERL_IMPLICIT_CONTEXT"
"PERL_NO_GET_CONTEXT"
"pTHX"
"pTHX_"
    Described in perlguts.

"SCHED_YIELD"
    This symbol defines the way to yield the execution of the current thread. Known ways are "sched_yield", "pthread_yield", and "pthread_yield" with "NULL".

COPs and Hint Hashes

"cop_fetch_label"
    NOTE: "cop_fetch_label" is experimental and may change or be removed without notice.

    Returns the label attached to a cop, and stores its length in bytes into *len. Upon return, *flags will be set to either "SVf_UTF8" or 0.

    Alternatively, use the macro "CopLABEL_len_flags"; or if you don't need to know if the label is UTF-8 or not, the macro "CopLABEL_len"; or if you additionally don't need to know the length, "CopLABEL".

     const char *       cop_fetch_label(      COP * const cop,
                                              STRLEN *len, U32 *flags)
     const char *  Perl_cop_fetch_label(pTHX_ COP * const cop,
                                              STRLEN *len, U32 *flags)

"cop_hints_exists_pv"
"cop_hints_exists_pvn"
"cop_hints_exists_pvs"
"cop_hints_exists_sv"
    These look up the hint entry in the cop "cop" with the key specified by "key" (and "keylen" in the "pvn" form), returning true if a value exists, and false otherwise.

    The forms differ in how the key is specified. In all forms, the key is pointed to by "key". In the plain "pv" form, the key is a C language NUL-terminated string. In the "pvs" form, the key is a C language string literal. In the "pvn" form, an additional parameter, "keylen", specifies the length of the string, which hence, may contain embedded-NUL characters. In the "sv" form, *key is an SV, and the key is the PV extracted from that. using "SvPV_const".

    "hash" is a precomputed hash of the key string, or zero if it has not been precomputed. This parameter is omitted from the "pvs" form, as it is computed automatically at compile time.

    The only flag currently used from the "flags" parameter is "COPHH_KEY_UTF8". It is illegal to set this in the "sv" form. In the "pv*" forms, it specifies whether the key octets are interpreted as UTF-8 (if set) or as Latin-1 (if cleared). The "sv" form uses the underlying SV to determine the UTF-8ness of the octets.

     bool  cop_hints_exists_pv (const COP *cop, const char *key,
                                U32 hash, U32 flags)
     bool  cop_hints_exists_pvn(const COP *cop, const char *key,
                                STRLEN keylen, U32 hash, U32 flags)
     bool  cop_hints_exists_pvs(const COP *cop, "key", U32 flags)
     bool  cop_hints_exists_sv (const COP *cop, SV *key, U32 hash,
                                U32 flags)

"cop_hints_fetch_pv"
"cop_hints_fetch_pvn"
"cop_hints_fetch_pvs"
"cop_hints_fetch_sv"
    These look up the hint entry in the cop "cop" with the key specified by "key" (and "keylen" in the "pvn" form), returning that value as a mortal scalar copy, or &PL_sv_placeholder if there is no value associated with the key.

    The forms differ in how the key is specified. In the plain "pv" form, the key is a C language NUL-terminated string. In the "pvs" form, the key is a C language string literal. In the "pvn" form, an additional parameter, "keylen", specifies the length of the string, which hence, may contain embedded-NUL characters. In the "sv" form, *key is an SV, and the key is the PV extracted from that. using "SvPV_const".

    "hash" is a precomputed hash of the key string, or zero if it has not been precomputed. This parameter is omitted from the "pvs" form, as it is computed automatically at compile time.

    The only flag currently used from the "flags" parameter is "COPHH_KEY_UTF8". It is illegal to set this in the "sv" form. In the "pv*" forms, it specifies whether the key octets are interpreted as UTF-8 (if set) or as Latin-1 (if cleared). The "sv" form uses the underlying SV to determine the UTF-8ness of the octets.

     SV *  cop_hints_fetch_pv (const COP *cop, const char *key,
                               U32 hash, U32 flags)
     SV *  cop_hints_fetch_pvn(const COP *cop, const char *key,
                               STRLEN keylen, U32 hash, U32 flags)
     SV *  cop_hints_fetch_pvs(const COP *cop, "key", U32 flags)
     SV *  cop_hints_fetch_sv (const COP *cop, SV *key, U32 hash,
                               U32 flags)

"cop_hints_2hv"
    Generates and returns a standard Perl hash representing the full set of hint entries in the cop "cop". "flags" is currently unused and must be zero.

     HV *  cop_hints_2hv(const COP *cop, U32 flags)

"cop_store_label"
    NOTE: "cop_store_label" is experimental and may change or be removed without notice.

    Save a label into a "cop_hints_hash". You need to set flags to "SVf_UTF8" for a UTF-8 label. Any other flag is ignored.

     void       cop_store_label(      COP * const cop,
                                      const char *label, STRLEN len,
                                      U32 flags)
     void  Perl_cop_store_label(pTHX_ COP * const cop,
                                      const char *label, STRLEN len,
                                      U32 flags)

"CopFILE"
    Returns the name of the file associated with the "COP" "c"

     const char *  CopFILE(const COP * c)

"CopFILE_copy"
    Efficiently copies the cop file name from one COP to another. Wraps the required logic to do a refcounted copy under threads or not.

     void  CopFILE_copy(COP * dst, COP * src)

"CopFILE_free"
    Frees the file data in a cop. Under the hood this is a refcounting operation.

     void  CopFILE_free(COP * c)

"CopFILE_LEN"
    Returns the length of the file associated with the "COP" "c"

     const char *  CopFILE_LEN(const COP * c)

"CopFILE_set"
"CopFILE_setn"
    These each make "pv" the name of the file associated with the "COP" "c". In the plain "CopFILE_set" form, "pv" is a C language NUL-terminated string. In "CopFILE_setn", "len" is the length of "pv", which hence may contain embedded NUL characters.

     void  CopFILE_set (COP * c, const char * pv)
     void  CopFILE_setn(COP * c, const char * pv, STRLEN len)

"CopFILEAV"
    Returns the AV associated with the "COP" "c", creating it if necessary.

     AV *  CopFILEAV(const COP * c)

"CopFILEAVn"
    Returns the AV associated with the "COP" "c", returning NULL if it doesn't already exist.

     AV *  CopFILEAVn(const COP * c)

"CopFILEGV"
    Returns the GV associated with the "COP" "c"

     GV *  CopFILEGV(const COP * c)

"CopFILEGV_set"
    Available only on unthreaded perls. Makes "pv" the name of the file associated with the "COP" "c"

     void  CopFILEGV_set(COP *c, GV *gv)

"CopFILESV"
    Returns the SV associated with the "COP" "c"

     SV *  CopFILESV(const COP * c)

"cophh_copy"
    NOTE: "cophh_copy" is experimental and may change or be removed without notice.

    Make and return a complete copy of the cop hints hash "cophh".

     COPHH *  cophh_copy(COPHH *cophh)

"cophh_delete_pv"
"cophh_delete_pvn"
"cophh_delete_pvs"
"cophh_delete_sv"
    NOTE: all these forms are experimental and may change or be removed without notice.

    These delete a key and its associated value from the cop hints hash "cophh", and return the modified hash. The returned hash pointer is in general not the same as the hash pointer that was passed in. The input hash is consumed by the function, and the pointer to it must not be subsequently used. Use "cophh_copy" if you need both hashes.

    The forms differ in how the key is specified. In all forms, the key is pointed to by "key". In the plain "pv" form, the key is a C language NUL-terminated string. In the "pvs" form, the key is a C language string literal. In the "pvn" form, an additional parameter, "keylen", specifies the length of the string, which hence, may contain embedded-NUL characters. In the "sv" form, *key is an SV, and the key is the PV extracted from that. using "SvPV_const".

    "hash" is a precomputed hash of the key string, or zero if it has not been precomputed. This parameter is omitted from the "pvs" form, as it is computed automatically at compile time.

    The only flag currently used from the "flags" parameter is "COPHH_KEY_UTF8". It is illegal to set this in the "sv" form. In the "pv*" forms, it specifies whether the key octets are interpreted as UTF-8 (if set) or as Latin-1 (if cleared). The "sv" form uses the underlying SV to determine the UTF-8ness of the octets.

     COPHH *  cophh_delete_pv (COPHH *cophh, const char *key,
                               U32 hash, U32 flags)
     COPHH *  cophh_delete_pvn(COPHH *cophh, const char *key,
                               STRLEN keylen, U32 hash, U32 flags)
     COPHH *  cophh_delete_pvs(COPHH *cophh, "key", U32 flags)
     COPHH *  cophh_delete_sv (COPHH *cophh, SV *key, U32 hash,
                               U32 flags)

"cophh_exists_pvn"
    NOTE: "cophh_exists_pvn" is experimental and may change or be removed without notice.

    These look up the hint entry in the cop "cop" with the key specified by "key" (and "keylen" in the "pvn" form), returning true if a value exists, and false otherwise.

    The forms differ in how the key is specified. In the plain "pv" form, the key is a C language NUL-terminated string. In the "pvs" form, the key is a C language string literal. In the "pvn" form, an additional parameter, "keylen", specifies the length of the string, which hence, may contain embedded-NUL characters. In the "sv" form, *key is an SV, and the key is the PV extracted from that. using "SvPV_const".

    "hash" is a precomputed hash of the key string, or zero if it has not been precomputed. This parameter is omitted from the "pvs" form, as it is computed automatically at compile time.

    The only flag currently used from the "flags" parameter is "COPHH_KEY_UTF8". It is illegal to set this in the "sv" form. In the "pv*" forms, it specifies whether the key octets are interpreted as UTF-8 (if set) or as Latin-1 (if cleared). The "sv" form uses the underlying SV to determine the UTF-8ness of the octets.

     bool  cophh_exists_pvn(const COPHH *cophh, const char *key,
                            STRLEN keylen, U32 hash, U32 flags)

"cophh_fetch_pv"
"cophh_fetch_pvn"
"cophh_fetch_pvs"
"cophh_fetch_sv"
    NOTE: all these forms are experimental and may change or be removed without notice.

    These look up the entry in the cop hints hash "cophh" with the key specified by "key" (and "keylen" in the "pvn" form), returning that value as a mortal scalar copy, or &PL_sv_placeholder if there is no value associated with the key.

    The forms differ in how the key is specified. In the plain "pv" form, the key is a C language NUL-terminated string. In the "pvs" form, the key is a C language string literal. In the "pvn" form, an additional parameter, "keylen", specifies the length of the string, which hence, may contain embedded-NUL characters. In the "sv" form, *key is an SV, and the key is the PV extracted from that. using "SvPV_const".

    "hash" is a precomputed hash of the key string, or zero if it has not been precomputed. This parameter is omitted from the "pvs" form, as it is computed automatically at compile time.

    The only flag currently used from the "flags" parameter is "COPHH_KEY_UTF8". It is illegal to set this in the "sv" form. In the "pv*" forms, it specifies whether the key octets are interpreted as UTF-8 (if set) or as Latin-1 (if cleared). The "sv" form uses the underlying SV to determine the UTF-8ness of the octets.

     SV *  cophh_fetch_pv (const COPHH *cophh, const char *key,
                           U32 hash, U32 flags)
     SV *  cophh_fetch_pvn(const COPHH *cophh, const char *key,
                           STRLEN keylen, U32 hash, U32 flags)
     SV *  cophh_fetch_pvs(const COPHH *cophh, "key", U32 flags)
     SV *  cophh_fetch_sv (const COPHH *cophh, SV *key, U32 hash,
                           U32 flags)

"cophh_free"
    NOTE: "cophh_free" is experimental and may change or be removed without notice.

    Discard the cop hints hash "cophh", freeing all resources associated with it.

     void  cophh_free(COPHH *cophh)

"cophh_new_empty"
    NOTE: "cophh_new_empty" is experimental and may change or be removed without notice.

    Generate and return a fresh cop hints hash containing no entries.

     COPHH *  cophh_new_empty()

"cophh_store_pv"
"cophh_store_pvn"
"cophh_store_pvs"
"cophh_store_sv"
    NOTE: all these forms are experimental and may change or be removed without notice.

    These store a value, associated with a key, in the cop hints hash "cophh", and return the modified hash. The returned hash pointer is in general not the same as the hash pointer that was passed in. The input hash is consumed by the function, and the pointer to it must not be subsequently used. Use "cophh_copy" if you need both hashes.

    "value" is the scalar value to store for this key. "value" is copied by these functions, which thus do not take ownership of any reference to it, and hence later changes to the scalar will not be reflected in the value visible in the cop hints hash. Complex types of scalar will not be stored with referential integrity, but will be coerced to strings.

    The forms differ in how the key is specified. In all forms, the key is pointed to by "key". In the plain "pv" form, the key is a C language NUL-terminated string. In the "pvs" form, the key is a C language string literal. In the "pvn" form, an additional parameter, "keylen", specifies the length of the string, which hence, may contain embedded-NUL characters. In the "sv" form, *key is an SV, and the key is the PV extracted from that. using "SvPV_const".

    "hash" is a precomputed hash of the key string, or zero if it has not been precomputed. This parameter is omitted from the "pvs" form, as it is computed automatically at compile time.

    The only flag currently used from the "flags" parameter is "COPHH_KEY_UTF8". It is illegal to set this in the "sv" form. In the "pv*" forms, it specifies whether the key octets are interpreted as UTF-8 (if set) or as Latin-1 (if cleared). The "sv" form uses the underlying SV to determine the UTF-8ness of the octets.

     COPHH *  cophh_store_pv (COPHH *cophh, const char *key, U32 hash,
                              SV *value, U32 flags)
     COPHH *  cophh_store_pvn(COPHH *cophh, const char *key,
                              STRLEN keylen, U32 hash, SV *value,
                              U32 flags)
     COPHH *  cophh_store_pvs(COPHH *cophh, "key", SV *value,
                              U32 flags)
     COPHH *  cophh_store_sv (COPHH *cophh, SV *key, U32 hash,
                              SV *value, U32 flags)

"cophh_2hv"
    NOTE: "cophh_2hv" is experimental and may change or be removed without notice.

    Generates and returns a standard Perl hash representing the full set of key/value pairs in the cop hints hash "cophh". "flags" is currently unused and must be zero.

     HV *  cophh_2hv(const COPHH *cophh, U32 flags)

"CopLABEL"
"CopLABEL_len"
"CopLABEL_len_flags"
    These return the label attached to a cop.

    "CopLABEL_len" and "CopLABEL_len_flags" additionally store the number of bytes comprising the returned label into *len.

    "CopLABEL_len_flags" additionally returns the UTF-8ness of the returned label, by setting *flags to 0 or "SVf_UTF8".

     const char *  CopLABEL          (COP *const cop)
     const char *  CopLABEL_len      (COP *const cop, STRLEN *len)
     const char *  CopLABEL_len_flags(COP *const cop, STRLEN *len,
                                      U32 *flags)

"CopLINE"
    Returns the line number in the source code associated with the "COP" "c"

     line_t  CopLINE(const COP * c)

"CopSTASH"
    Returns the stash associated with "c".

     HV *  CopSTASH(const COP * c)

"CopSTASH_eq"
    Returns a boolean as to whether or not "hv" is the stash associated with "c".

     bool  CopSTASH_eq(const COP * c, const HV * hv)

"CopSTASH_set"
    Set the stash associated with "c" to "hv".

     bool  CopSTASH_set(COP * c, HV * hv)

"CopSTASHPV"
    Returns the package name of the stash associated with "c", or "NULL" if no associated stash

     char *  CopSTASHPV(const COP * c)

"CopSTASHPV_set"
    Set the package name of the stash associated with "c", to the NUL-terminated C string "p", creating the package if necessary.

     void  CopSTASHPV_set(COP * c, const char * pv)

"PERL_SI"
    Use this typedef to declare variables that are to hold "struct stackinfo".

"PL_curcop"
    The currently active COP (control op) roughly representing the current statement in the source.

    On threaded perls, each thread has an independent copy of this variable; each initialized at creation time with the current value of the creating thread's copy.

     COP*  PL_curcop

"RCPV_LEN"
    Returns the length of a pv created with rcpv_new(). Note that this reflects the length of the string from the callers point of view, it does not include the mandatory null which is always injected at the end of the string by rcpv_new(). No checks are performed to ensure that "pv" was actually allocated with rcpv_new(), it is the callers responsibility to ensure that this is the case.

     RCPV *  RCPV_LEN(char *pv)

"RCPV_REFCNT_dec"
    Decrements the refcount for a "char *" pointer which was created with a call to rcpv_new(). Same as calling rcpv_free(). No checks are performed to ensure that "pv" was actually allocated with rcpv_new(), it is the callers responsibility to ensure that this is the case.

     RCPV *  RCPV_REFCNT_dec(char *pv)

"RCPV_REFCNT_inc"
    Increments the refcount for a "char *" pointer which was created with a call to rcpv_new(). Same as calling rcpv_copy(). No checks are performed to ensure that "pv" was actually allocated with rcpv_new(), it is the callers responsibility to ensure that this is the case.

     RCPV *  RCPV_REFCNT_inc(char *pv)

"RCPV_REFCOUNT"
    Returns the refcount for a pv created with rcpv_new(). No checks are performed to ensure that "pv" was actually allocated with rcpv_new(), it is the callers responsibility to ensure that this is the case.

     RCPV *  RCPV_REFCOUNT(char *pv)

"RCPVx"
    Returns the RCPV structure (struct rcpv) for a refcounted string pv created with rcpv_new(). No checks are performed to ensure that "pv" was actually allocated with rcpv_new(), it is the callers responsibility to ensure that this is the case.

     RCPV *  RCPVx(char *pv)

Custom Operators

"custom_op_register"
    Register a custom op. See "Custom Operators" in perlguts.

     void  Perl_custom_op_register(pTHX_ Perl_ppaddr_t ppaddr,
                                         const XOP *xop)

"Perl_custom_op_xop"
    Return the XOP structure for a given custom op. This macro should be considered internal to "OP_NAME" and the other access macros: use them instead. This macro does call a function. Prior to 5.19.6, this was implemented as a function.

     const XOP *  Perl_custom_op_xop(const OP *o)

"XopDISABLE"
    Temporarily disable a member of the XOP, by clearing the appropriate flag.

     void  XopDISABLE(XOP *xop, token which)

"XopENABLE"
    Reenable a member of the XOP which has been disabled.

     void  XopENABLE(XOP *xop, token which)

"XopENTRY"
    Return a member of the XOP structure. "which" is a cpp token indicating which entry to return. If the member is not set this will return a default value. The return type depends on "which". This macro evaluates its arguments more than once. If you are using "Perl_custom_op_xop" to retrieve a "XOP *" from a "OP *", use the more efficient "XopENTRYCUSTOM" instead.

       XopENTRY(XOP *xop, token which)

"XopENTRY_set"
    Set a member of the XOP structure. "which" is a cpp token indicating which entry to set. See "Custom Operators" in perlguts for details about the available members and how they are used. This macro evaluates its argument more than once.

     void  XopENTRY_set(XOP *xop, token which, value)

"XopENTRYCUSTOM"
    Exactly like "XopENTRY(XopENTRY(Perl_custom_op_xop(aTHX_ o), which)" but more efficient. The "which" parameter is identical to "XopENTRY".

       XopENTRYCUSTOM(const OP *o, token which)

"XopFLAGS"
    Return the XOP's flags.

     U32  XopFLAGS(XOP *xop)

CV Handling
This section documents functions to manipulate CVs which are code-values, meaning subroutines. For more information, see perlguts.

"caller_cx"
    The XSUB-writer's equivalent of caller(). The returned "PERL_CONTEXT" structure can be interrogated to find all the information returned to Perl by "caller". Note that XSUBs don't get a stack frame, so "caller_cx(0, NULL)" will return information for the immediately-surrounding Perl code.

    This function skips over the automatic calls to &DB::sub made on the behalf of the debugger. If the stack frame requested was a sub called by "DB::sub", the return value will be the frame for the call to "DB::sub", since that has the correct line number/etc. for the call site. If dbcxp is non-"NULL", it will be set to a pointer to the frame for the sub call itself.

     const PERL_CONTEXT *       caller_cx(I32 level,
                                           const PERL_CONTEXT **dbcxp)
     const PERL_CONTEXT *  Perl_caller_cx(pTHX_ I32 level,
                                           const PERL_CONTEXT **dbcxp)

"CvDEPTH"
    Returns the recursion level of the CV "sv". Hence >= 2 indicates we are in a recursive call.

     I32 *       CvDEPTH(const CV * const sv)
     I32 *  Perl_CvDEPTH(const CV * const sv)

"CvGV"
    Returns the GV associated with the CV "sv", reifying it if necessary.

     GV *       CvGV(      CV *sv)
     GV *  Perl_CvGV(pTHX_ CV *sv)

"CvREFCNT_inc"
"CvREFCNT_inc_simple"
"CvREFCNT_inc_simple_NN"
    These all increment the reference count of the given SV, which must be a CV. They are useful when assigning the result into a typed pointer as they avoid the need to cast the result to the appropriate type.

     CV *  CvREFCNT_inc          (CV *cv)
     CV *  CvREFCNT_inc_simple   (CV *cv)
     CV *  CvREFCNT_inc_simple_NN(CV *cv)

"CvSTASH"
    Returns the stash of the CV. A stash is the symbol table hash, containing the package-scoped variables in the package where the subroutine was defined. For more information, see perlguts.

    This also has a special use with XS AUTOLOAD subs. See "Autoloading with XSUBs" in perlguts.

     HV*  CvSTASH(CV* cv)

"find_runcv"
    Locate the CV corresponding to the currently executing sub or eval. If "db_seqp" is non_null, skip CVs that are in the DB package and populate *db_seqp with the cop sequence number at the point that the DB:: code was entered. (This allows debuggers to eval in the scope of the breakpoint rather than in the scope of the debugger itself.)

     CV *       find_runcv(      U32 *db_seqp)
     CV *  Perl_find_runcv(pTHX_ U32 *db_seqp)

"get_cv"
"get_cvn_flags"
"get_cvs"
    These return the CV of the specified Perl subroutine. "flags" are passed to "gv_fetchpvn_flags". If "GV_ADD" is set and the Perl subroutine does not exist then it will be declared (which has the same effect as saying "sub name;"). If "GV_ADD" is not set and the subroutine does not exist, then NULL is returned.

    The forms differ only in how the subroutine is specified.. With "get_cvs", the name is a literal C string, enclosed in double quotes. With "get_cv", the name is given by the "name" parameter, which must be a NUL-terminated C string. With "get_cvn_flags", the name is also given by the "name" parameter, but it is a Perl string (possibly containing embedded NUL bytes), and its length in bytes is contained in the "len" parameter.

    NOTE: the perl_get_cv() form is deprecated.

     CV *       get_cv       (      const char *name, I32 flags)
     CV *  Perl_get_cv       (pTHX_ const char *name, I32 flags)
     CV *       get_cvn_flags(      const char *name, STRLEN len,
                                    I32 flags)
     CV *  Perl_get_cvn_flags(pTHX_ const char *name, STRLEN len,
                                    I32 flags)
     CV *       get_cvs      (      "name", I32 flags)

"Nullcv"
    "DEPRECATED!" It is planned to remove "Nullcv" from a future release of Perl. Do not use it for new code; remove it from existing code.

    Null CV pointer.

    (deprecated - use "(CV *)NULL" instead)

Debugging

"av_dump"
    Dumps the contents of an AV to the "STDERR" filehandle, Similar to using Devel::Peek on an arrayref but does not expect an RV wrapper. Dumps contents to a depth of 3 levels deep.

     void       av_dump(      AV *av)
     void  Perl_av_dump(pTHX_ AV *av)

"deb"
"deb_nocontext"
"vdeb"
    When perl is compiled with "-DDEBUGGING", these each print to STDERR the information given by the arguments, prefaced by the name of the file containing the script causing the call, and the line number within that file.

    If the "v" (verbose) debugging option is in effect, the process id is also printed.

    "deb" and "deb_nocontext" differ only in that "deb_nocontext" does not take a thread context ("aTHX") parameter, so is used in situations where the caller doesn't already have the thread context.

    "vdeb" is the same as "deb" except "args" are an encapsulated argument list.

     void  Perl_deb          (pTHX_ const char *pat, ...)
     void       deb_nocontext(      const char *pat, ...)
     void  Perl_deb_nocontext(      const char *pat, ...)
     void       vdeb         (      const char *pat, va_list *args)
     void  Perl_vdeb         (pTHX_ const char *pat, va_list *args)

"debstack"
    Dump the current stack

     I32       debstack()
     I32  Perl_debstack(pTHX)

"dump_all"
    Dumps the entire optree of the current program starting at "PL_main_root" to "STDERR". Also dumps the optrees for all visible subroutines in "PL_defstash".

     void       dump_all()
     void  Perl_dump_all(pTHX)

"dump_c_backtrace"
    Dumps the C backtrace to the given "fp".

    Returns true if a backtrace could be retrieved, false if not.

     bool       dump_c_backtrace(      PerlIO *fp, int max_depth,
                                       int skip)
     bool  Perl_dump_c_backtrace(pTHX_ PerlIO *fp, int max_depth,
                                       int skip)

"dump_eval"
    Described in perlguts.

     void       dump_eval()
     void  Perl_dump_eval(pTHX)

"dump_form"
    Dumps the contents of the format contained in the GV "gv" to "STDERR", or a message that one doesn't exist.

     void       dump_form(      const GV *gv)
     void  Perl_dump_form(pTHX_ const GV *gv)

"dump_packsubs"
    Dumps the optrees for all visible subroutines in "stash".

     void       dump_packsubs(      const HV *stash)
     void  Perl_dump_packsubs(pTHX_ const HV *stash)

"dump_sub"
    Described in perlguts.

     void       dump_sub(      const GV *gv)
     void  Perl_dump_sub(pTHX_ const GV *gv)

"get_c_backtrace_dump"
    Returns a SV containing a dump of "depth" frames of the call stack, skipping the "skip" innermost ones. "depth" of 20 is usually enough.

    The appended output looks like:

     ...
     1   10e004812:0082   Perl_croak   util.c:1716    /usr/bin/perl
     2   10df8d6d2:1d72   perl_parse   perl.c:3975    /usr/bin/perl
     ...

    The fields are tab-separated. The first column is the depth (zero being the innermost non-skipped frame). In the hex:offset, the hex is where the program counter was in "S_parse_body", and the :offset (might be missing) tells how much inside the "S_parse_body" the program counter was.

    The "util.c:1716" is the source code file and line number.

    The /usr/bin/perl is obvious (hopefully).

    Unknowns are "-". Unknowns can happen unfortunately quite easily: if the platform doesn't support retrieving the information; if the binary is missing the debug information; if the optimizer has transformed the code by for example inlining.

     SV *       get_c_backtrace_dump(      int max_depth, int skip)
     SV *  Perl_get_c_backtrace_dump(pTHX_ int max_depth, int skip)

"gv_dump"
    Dump the name and, if they differ, the effective name of the GV "gv" to "STDERR".

     void       gv_dump(      GV *gv)
     void  Perl_gv_dump(pTHX_ GV *gv)

"HAS_BACKTRACE"
    This symbol, if defined, indicates that the backtrace() routine is available to get a stack trace. The execinfo.h header must be included to use this routine.

"hv_dump"
    Dumps the contents of an HV to the "STDERR" filehandle. Similar to using Devel::Peek on an hashref but does not expect an RV wrapper. Dumps contents to a depth of 3 levels deep.

     void       hv_dump(      HV *hv)
     void  Perl_hv_dump(pTHX_ HV *hv)

"magic_dump"
    Dumps the contents of the MAGIC "mg" to "STDERR".

     void       magic_dump(      const MAGIC *mg)
     void  Perl_magic_dump(pTHX_ const MAGIC *mg)

"op_class"
    Given an op, determine what type of struct it has been allocated as. Returns one of the OPclass enums, such as OPclass_LISTOP.

     OPclass       op_class(      const OP *o)
     OPclass  Perl_op_class(pTHX_ const OP *o)

"op_dump"
    Dumps the optree starting at OP "o" to "STDERR".

     void       op_dump(      const OP *o)
     void  Perl_op_dump(pTHX_ const OP *o)

"opdump_printf"
    Prints formatted output to "STDERR" according to the pattern and subsequent arguments, in the style of printf() et.al. This should only be called by a function invoked by the "xop_dump" field of a custom operator, where the "ctx" opaque structure pointer should be passed in from the argument given to the "xop_dump" callback.

    This function handles indentation after linefeeds, so message strings passed in should not account for it themselves. Multiple lines may be passed to this function at once, or a single line may be split across multiple calls.

     void  Perl_opdump_printf(pTHX_ struct Perl_OpDumpContext *ctx,
                                    const char *pat, ...)

"PL_op"
    Described in perlhacktips.

"PL_runops"
    Described in perlguts.

     runops_proc_t  PL_runops

"PL_sv_serial"
    Described in perlhacktips.

"pmop_dump"
    Dump an OP that is related to Pattern Matching, such as "s/foo/bar/"; these require special handling.

     void       pmop_dump(      PMOP *pm)
     void  Perl_pmop_dump(pTHX_ PMOP *pm)

"sv_dump"
"sv_dump_depth"
    These each dump the contents of an SV to the "STDERR" filehandle.

    "sv_dump_depth" is a more flexible variant of "sv_dump", taking an extra parameter giving the maximum depth to dump.

    "sv_dump" is limited to dumping items to a depth of 4 if the item is an SvROK, and dumping only the top level item otherwise. This means that it will not dump the contents of an "AV *" or "HV *". For that use "av_dump" or "hv_dump".

    For an example of its output, see Devel::Peek.

    In contrast, "sv_dump_depth" can be used on any SV derived type (GV, HV, AV) with an appropriate cast:

        HV *hv = ...;
        sv_dump_depth((SV*)hv, 2);

    would dump the hv, its keys and values, but would not recurse into any RV values.

     void       sv_dump      (      SV *sv)
     void  Perl_sv_dump      (pTHX_ SV *sv)
     void       sv_dump_depth(      SV *sv, I32 depth)
     void  Perl_sv_dump_depth(pTHX_ SV *sv, I32 depth)

"vdeb*"
    Described under "deb"

Display functions

"form"
"form_nocontext"
"vform"
    These each take a sprintf-style format pattern and conventional (non-SV) arguments and return the formatted string.

        (char *) form(const char* pat, ...)

    They can be used any place a string (char *) is required:

        char * s = form_nocontext("%d.%d", major, minor);

    They each return a temporary that will be freed "soon", automatically by the system, at the same time that SVs operated on by "sv_2mortal" are freed.

    Use the result immediately, or copy to a stable place for longer retention. This is contrary to the incorrect previous documentation of these that claimed that the return was a single per-thread buffer. That was (and is) actually true only when these are called during global destruction.

    "form" and "form_nocontext" differ only in that "form_nocontext" does not take a thread context ("aTHX") parameter, so is used in situations where the caller doesn't already have the thread context (and can be called without the "Perl_" prefix.

    "vform" is the same as "form" except the arguments are an encapsulated argument list. It does need a thread context parameter, but that is supplied automatically when called without the "Perl_" prefix.

     char *  Perl_form          (pTHX_ const char *pat, ...)
     char *       form_nocontext(      const char *pat, ...)
     char *  Perl_form_nocontext(      const char *pat, ...)
     char *       vform         (      const char *pat, va_list *args)
     char *  Perl_vform         (pTHX_ const char *pat, va_list *args)

"mess"
"mess_nocontext"
"vmess"
    These each take a sprintf-style format pattern and argument list, which are used to generate a string message. If the message does not end with a newline, then it will be extended with some indication of the current location in the code, as described for "mess_sv".

    "mess" and "mess_nocontext" differ only in that "mess_nocontext" does not take a thread context ("aTHX") parameter, so is used in situations where the caller doesn't already have the thread context.

    "vmess" is the same as "mess" except the arguments are an encapsulated argument list. It needs a thread context parameter only when called with the "Perl_" prefix.

    Normally, the resulting message is returned in a new mortal SV. But during global destruction a single SV may be shared between uses of this function.

     SV *  Perl_mess          (pTHX_ const char *pat, ...)
     SV *       mess_nocontext(      const char *pat, ...)
     SV *  Perl_mess_nocontext(      const char *pat, ...)
     SV *       vmess         (      const char *pat, va_list *args)
     SV *  Perl_vmess         (pTHX_ const char *pat, va_list *args)

"mess_sv"
    Expands a message, intended for the user, to include an indication of the current location in the code, if the message does not already appear to be complete.

    "basemsg" is the initial message or object. If it is a reference, it will be used as-is and will be the result of this function. Otherwise it is used as a string, and if it already ends with a newline, it is taken to be complete, and the result of this function will be the same string. If the message does not end with a newline, then a segment such as "at foo.pl line 37" will be appended, and possibly other clauses indicating the current state of execution. The resulting message will end with a dot and a newline.

    Normally, the resulting message is returned in a new mortal SV. During global destruction a single SV may be shared between uses of this function. If "consume" is true, then the function is permitted (but not required) to modify and return "basemsg" instead of allocating a new SV.

     SV *       mess_sv(      SV *basemsg, bool consume)
     SV *  Perl_mess_sv(pTHX_ SV *basemsg, bool consume)

"pv_display"
    Similar to

      pv_escape(dsv,pv,cur,pvlim,PERL_PV_ESCAPE_QUOTE);

    except that an additional "\0" will be appended to the string when len > cur and pv[cur] is "\0".

    Note that the final string may be up to 7 chars longer than pvlim.

     char *       pv_display(      SV *dsv, const char *pv,
                                   STRLEN cur, STRLEN len,
                                   STRLEN pvlim)
     char *  Perl_pv_display(pTHX_ SV *dsv, const char *pv,
                                   STRLEN cur, STRLEN len,
                                   STRLEN pvlim)

"pv_escape"
    Escapes at most the first "count" chars of "pv" and puts the results into "dsv" such that the size of the escaped string will not exceed "max" chars and will not contain any incomplete escape sequences. The number of bytes escaped will be returned in the "STRLEN *escaped" parameter if it is not null. When the "dsv" parameter is null no escaping actually occurs, but the number of bytes that would be escaped were it not null will be calculated.

    If flags contains "PERL_PV_ESCAPE_QUOTE" then any double quotes in the string will also be escaped.

    Normally the SV will be cleared before the escaped string is prepared, but when "PERL_PV_ESCAPE_NOCLEAR" is set this will not occur.

    If "PERL_PV_ESCAPE_UNI" is set then the input string is treated as UTF-8. If "PERL_PV_ESCAPE_UNI_DETECT" is set then the input string is scanned using is_utf8_string() to determine if it is UTF-8.

    If "PERL_PV_ESCAPE_ALL" is set then all input chars will be output using "\x01F1" style escapes, otherwise if "PERL_PV_ESCAPE_NONASCII" is set, only non-ASCII chars will be escaped using this style; otherwise, only chars above 255 will be so escaped; other non printable chars will use octal or common escaped patterns like "\n". Otherwise, if "PERL_PV_ESCAPE_NOBACKSLASH" then all chars below 255 will be treated as printable and will be output as literals. The "PERL_PV_ESCAPE_NON_WC" modifies the previous rules to cause word chars, unicode or otherwise, to be output as literals, note this uses the *unicode* rules for deciding on word characters.

    If "PERL_PV_ESCAPE_FIRSTCHAR" is set then only the first char of the string will be escaped, regardless of max. If the output is to be in hex, then it will be returned as a plain hex sequence. Thus the output will either be a single char, an octal escape sequence, a special escape like "\n" or a hex value.

    If "PERL_PV_ESCAPE_RE" is set then the escape char used will be a "%" and not a "\\". This is because regexes very often contain backslashed sequences, whereas "%" is not a particularly common character in patterns.

    Returns a pointer to the escaped text as held by "dsv".

     char *       pv_escape(      SV *dsv, char const * const str,
                                  const STRLEN count, STRLEN max,
                                  STRLEN * const escaped, U32 flags)
     char *  Perl_pv_escape(pTHX_ SV *dsv, char const * const str,
                                  const STRLEN count, STRLEN max,
                                  STRLEN * const escaped, U32 flags)

"pv_pretty"
    Converts a string into something presentable, handling escaping via pv_escape() and supporting quoting and ellipses.

    If the "PERL_PV_PRETTY_QUOTE" flag is set then the result will be double quoted with any double quotes in the string escaped. Otherwise if the "PERL_PV_PRETTY_LTGT" flag is set then the result be wrapped in angle brackets.

    If the "PERL_PV_PRETTY_ELLIPSES" flag is set and not all characters in string were output then an ellipsis "..." will be appended to the string. Note that this happens AFTER it has been quoted.

    If "start_color" is non-null then it will be inserted after the opening quote (if there is one) but before the escaped text. If "end_color" is non-null then it will be inserted after the escaped text but before any quotes or ellipses.

    Returns a pointer to the prettified text as held by "dsv".

     char *       pv_pretty(      SV *dsv, char const * const str,
                                  const STRLEN count,
                                  const STRLEN max,
                                  char const * const start_color,
                                  char const * const end_color,
                                  const U32 flags)
     char *  Perl_pv_pretty(pTHX_ SV *dsv, char const * const str,
                                  const STRLEN count,
                                  const STRLEN max,
                                  char const * const start_color,
                                  char const * const end_color,
                                  const U32 flags)

"vform*"
    Described under "form"

"vmess*"
    Described under "mess"

Embedding, Threads, and Interpreter Cloning

"call_atexit"
    Add a function "fn" to the list of functions to be called at global destruction. "ptr" will be passed as an argument to "fn"; it can point to a "struct" so that you can pass anything you want.

    Note that under threads, "fn" may run multiple times. This is because the list is executed each time the current or any descendent thread terminates.

     void       call_atexit(      ATEXIT_t fn, void *ptr)
     void  Perl_call_atexit(pTHX_ ATEXIT_t fn, void *ptr)

"cv_clone"
    Clone a CV, making a lexical closure. "proto" supplies the prototype of the function: its code, pad structure, and other attributes. The prototype is combined with a capture of outer lexicals to which the code refers, which are taken from the currently-executing instance of the immediately surrounding code.

     CV *       cv_clone(      CV *proto)
     CV *  Perl_cv_clone(pTHX_ CV *proto)

"cv_name"
    Returns an SV containing the name of the CV, mainly for use in error reporting. The CV may actually be a GV instead, in which case the returned SV holds the GV's name. Anything other than a GV or CV is treated as a string already holding the sub name, but this could change in the future.

    An SV may be passed as a second argument. If so, the name will be assigned to it and it will be returned. Otherwise the returned SV will be a new mortal.

    If "flags" has the "CV_NAME_NOTQUAL" bit set, then the package name will not be included. If the first argument is neither a CV nor a GV, this flag is ignored (subject to change).

     SV *       cv_name(      NOCHECK CV *cv, SV *sv, U32 flags)
     SV *  Perl_cv_name(pTHX_ NOCHECK CV *cv, SV *sv, U32 flags)

"cv_undef"
    Clear out all the active components of a CV. This can happen either by an explicit "undef &foo", or by the reference count going to zero. In the former case, we keep the "CvOUTSIDE" pointer, so that any anonymous children can still follow the full lexical scope chain.

     void       cv_undef(      CV *cv)
     void  Perl_cv_undef(pTHX_ CV *cv)

"find_rundefsv"
    Returns the global variable $_.

     SV *       find_rundefsv()
     SV *  Perl_find_rundefsv(pTHX)

"get_op_descs"
    "DEPRECATED!" It is planned to remove "get_op_descs" from a future release of Perl. Do not use it for new code; remove it from existing code.

    Return a pointer to the array of all the descriptions of the various OPs Given an opcode from the enum in opcodes.h, "PL_op_desc[opcode]" returns a pointer to a C language string giving its description.

     char **       get_op_descs()
     char **  Perl_get_op_descs(pTHX)

"get_op_names"
    "DEPRECATED!" It is planned to remove "get_op_names" from a future release of Perl. Do not use it for new code; remove it from existing code.

    Return a pointer to the array of all the names of the various OPs Given an opcode from the enum in opcodes.h, "PL_op_name[opcode]" returns a pointer to a C language string giving its name.

     char **       get_op_names()
     char **  Perl_get_op_names(pTHX)

"HAS_SKIP_LOCALE_INIT"
    Described in perlembed.

"intro_my"
    "Introduce" "my" variables to visible status. This is called during parsing at the end of each statement to make lexical variables visible to subsequent statements.

     U32       intro_my()
     U32  Perl_intro_my(pTHX)

"load_module"
"load_module_nocontext"
    These load the module whose name is pointed to by the string part of "name". Note that the actual module name, not its filename, should be given. Eg, "Foo::Bar" instead of "Foo/Bar.pm". ver, if specified and not NULL, provides version semantics similar to "use Foo::Bar VERSION". The optional trailing arguments can be used to specify arguments to the module's import() method, similar to "use Foo::Bar VERSION LIST"; their precise handling depends on the flags. The flags argument is a bitwise-ORed collection of any of "PERL_LOADMOD_DENY", "PERL_LOADMOD_NOIMPORT", or "PERL_LOADMOD_IMPORT_OPS" (or 0 for no flags).

    If "PERL_LOADMOD_NOIMPORT" is set, the module is loaded as if with an empty import list, as in "use Foo::Bar ()"; this is the only circumstance in which the trailing optional arguments may be omitted entirely. Otherwise, if "PERL_LOADMOD_IMPORT_OPS" is set, the trailing arguments must consist of exactly one "OP*", containing the op tree that produces the relevant import arguments. Otherwise, the trailing arguments must all be "SV*" values that will be used as import arguments; and the list must be terminated with "(SV*) NULL". If neither "PERL_LOADMOD_NOIMPORT" nor "PERL_LOADMOD_IMPORT_OPS" is set, the trailing "NULL" pointer is needed even if no import arguments are desired. The reference count for each specified "SV*" argument is decremented. In addition, the "name" argument is modified.

    If "PERL_LOADMOD_DENY" is set, the module is loaded as if with "no" rather than "use".

    "load_module" and "load_module_nocontext" have the same apparent signature, but the former hides the fact that it is accessing a thread context parameter. So use the latter when you get a compilation error about "pTHX".

     void       load_module          (      U32 flags, SV *name,
                                            SV *ver, ...)
     void  Perl_load_module          (pTHX_ U32 flags, SV *name,
                                            SV *ver, ...)
     void       load_module_nocontext(      U32 flags, SV *name,
                                            SV *ver, ...)
     void  Perl_load_module_nocontext(      U32 flags, SV *name,
                                            SV *ver, ...)

"my_exit"
    A wrapper for the C library exit(3), honoring what "PL_exit_flags" in perlapi say to do.

     void       my_exit(      U32 status)
     void  Perl_my_exit(pTHX_ U32 status)

"my_failure_exit"
    Exit the running Perl process with an error.

    On non-VMS platforms, this is essentially equivalent to ""my_exit"", using "errno", but forces an en error code of 255 if "errno" is 0.

    On VMS, it takes care to set the appropriate severity bits in the exit status.

     void       my_failure_exit()
     void  Perl_my_failure_exit(pTHX)

"newPADNAMELIST"
    NOTE: "newPADNAMELIST" is experimental and may change or be removed without notice.

    Creates a new pad name list. "max" is the highest index for which space is allocated.

     PADNAMELIST *       newPADNAMELIST(size_t max)
     PADNAMELIST *  Perl_newPADNAMELIST(size_t max)

"newPADNAMEouter"
    NOTE: "newPADNAMEouter" is experimental and may change or be removed without notice.

    Constructs and returns a new pad name. Only use this function for names that refer to outer lexicals. (See also "newPADNAMEpvn".) "outer" is the outer pad name that this one mirrors. The returned pad name has the "PADNAMEf_OUTER" flag already set.

     PADNAME *       newPADNAMEouter(PADNAME *outer)
     PADNAME *  Perl_newPADNAMEouter(PADNAME *outer)

"newPADNAMEpvn"
    NOTE: "newPADNAMEpvn" is experimental and may change or be removed without notice.

    Constructs and returns a new pad name. "s" must be a UTF-8 string. Do not use this for pad names that point to outer lexicals. See "newPADNAMEouter".

     PADNAME *       newPADNAMEpvn(const char *s, STRLEN len)
     PADNAME *  Perl_newPADNAMEpvn(const char *s, STRLEN len)

"nothreadhook"
    Stub that provides thread hook for perl_destruct when there are no threads.

     int       nothreadhook()
     int  Perl_nothreadhook(pTHX)

"pad_add_anon"
    Allocates a place in the currently-compiling pad (via "pad_alloc") for an anonymous function that is lexically scoped inside the currently-compiling function. The function "func" is linked into the pad, and its "CvOUTSIDE" link to the outer scope is weakened to avoid a reference loop.

    One reference count is stolen, so you may need to do SvREFCNT_inc(func).

    "optype" should be an opcode indicating the type of operation that the pad entry is to support. This doesn't affect operational semantics, but is used for debugging.

     PADOFFSET       pad_add_anon(      CV *func, I32 optype)
     PADOFFSET  Perl_pad_add_anon(pTHX_ CV *func, I32 optype)

"pad_add_name_pv"
"pad_add_name_pvn"
"pad_add_name_sv"
    These each allocate a place in the currently-compiling pad for a named lexical variable. They store the name and other metadata in the name part of the pad, and make preparations to manage the variable's lexical scoping. They return the offset of the allocated pad slot.

    They differ only in how the input variable's name is specified.

    If "typestash" is non-null, the name is for a typed lexical, and this identifies the type. If "ourstash" is non-null, it's a lexical reference to a package variable, and this identifies the package. The following flags can be OR'ed together:

     padadd_OUR          redundantly specifies if it's a package var
     padadd_STATE        variable will retain value persistently
     padadd_NO_DUP_CHECK skip check for lexical shadowing
     padadd_FIELD        specifies that the lexical is a field for a class

    In all forms, the variable name must include the leading sigil.

    In "pad_add_name_sv", the input name is taken from the SV parameter using ""SvPVutf8"()".

    In "pad_add_name_pv", the input name is a NUL-terminated string, which must be encoded in UTF-8.

    In "pad_add_name_pvn", "namelen" gives the length of the input name in bytes, which means it may contain embedded NUL characters. Again, it must be encoded in UTF-8.

     PADOFFSET       pad_add_name_pv (      const char *name,
                                            const U32 flags,
                                            HV *typestash,
                                            HV *ourstash)
     PADOFFSET  Perl_pad_add_name_pv (pTHX_ const char *name,
                                            const U32 flags,
                                            HV *typestash,
                                            HV *ourstash)
     PADOFFSET       pad_add_name_pvn(      const char *namepv,
                                            STRLEN namelen, U32 flags,
                                            HV *typestash,
                                            HV *ourstash)
     PADOFFSET  Perl_pad_add_name_pvn(pTHX_ const char *namepv,
                                            STRLEN namelen, U32 flags,
                                            HV *typestash,
                                            HV *ourstash)
     PADOFFSET       pad_add_name_sv (      SV *name, U32 flags,
                                            HV *typestash,
                                            HV *ourstash)
     PADOFFSET  Perl_pad_add_name_sv (pTHX_ SV *name, U32 flags,
                                            HV *typestash,
                                            HV *ourstash)

"pad_alloc"
    NOTE: "pad_alloc" is experimental and may change or be removed without notice.

    Allocates a place in the currently-compiling pad, returning the offset of the allocated pad slot. No name is initially attached to the pad slot. "tmptype" is a set of flags indicating the kind of pad entry required, which will be set in the value SV for the allocated pad entry:

        SVs_PADMY    named lexical variable ("my", "our", "state")
        SVs_PADTMP   unnamed temporary store
        SVf_READONLY constant shared between recursion levels

    "SVf_READONLY" has been supported here only since perl 5.20. To work with earlier versions as well, use "SVf_READONLY|SVs_PADTMP". "SVf_READONLY" does not cause the SV in the pad slot to be marked read-only, but simply tells "pad_alloc" that it will be made read-only (by the caller), or at least should be treated as such.

    "optype" should be an opcode indicating the type of operation that the pad entry is to support. This doesn't affect operational semantics, but is used for debugging.

     PADOFFSET       pad_alloc(      I32 optype, U32 tmptype)
     PADOFFSET  Perl_pad_alloc(pTHX_ I32 optype, U32 tmptype)

"pad_findmy_pv"
"pad_findmy_pvn"
"pad_findmy_pvs"
"pad_findmy_sv"
    Given the name of a lexical variable, including its leading sigil, find its position in the currently-compiling pad.

    If it is not in the current pad but appears in the pad of any lexically enclosing scope, then a pseudo-entry for it is added in the current pad.

    These each return the offset in the current pad, or "NOT_IN_PAD" if no such lexical is in scope.

    The forms differ only in how the variable's name is specified.

    In "pad_findmy_pvs", the variable name is a C language string literal, enclosed in double quotes.

    In plain "pad_findmy_pv", the variable name is a C language NUL-terminated string.

    In "pad_findmy_pvn", "len" gives the length of the variable name in bytes, so it may contain embedded-NUL characters. The caller must make sure "namepv" contains at least "len" bytes.

    In "pad_findmy_sv", the variable name is taken from the SV parameter using ""SvPVutf8"()".

    "flags" is reserved and must be zero.

     PADOFFSET       pad_findmy_pv (      const char *name, U32 flags)
     PADOFFSET  Perl_pad_findmy_pv (pTHX_ const char *name, U32 flags)
     PADOFFSET       pad_findmy_pvn(      const char *namepv,
                                          STRLEN namelen, U32 flags)
     PADOFFSET  Perl_pad_findmy_pvn(pTHX_ const char *namepv,
                                          STRLEN namelen, U32 flags)
     PADOFFSET       pad_findmy_pvs(      "name", U32 flags)
     PADOFFSET       pad_findmy_sv (      SV *name, U32 flags)
     PADOFFSET  Perl_pad_findmy_sv (pTHX_ SV *name, U32 flags)

"pad_tidy"
    NOTE: "pad_tidy" is experimental and may change or be removed without notice.

    Tidy up a pad at the end of compilation of the code to which it belongs. Jobs performed here are: remove most stuff from the pads of anonsub prototypes; give it a @_; mark temporaries as such. "type" indicates the kind of subroutine:

        padtidy_SUB        ordinary subroutine
        padtidy_SUBCLONE   prototype for lexical closure
        padtidy_FORMAT     format

     void       pad_tidy(      padtidy_type type)
     void  Perl_pad_tidy(pTHX_ padtidy_type type)

"padnamelist_fetch"
    NOTE: "padnamelist_fetch" is experimental and may change or be removed without notice.

    Fetches the pad name from the given index.

     PADNAME *       padnamelist_fetch(PADNAMELIST *pnl, SSize_t key)
     PADNAME *  Perl_padnamelist_fetch(PADNAMELIST *pnl, SSize_t key)

"padnamelist_store"
    NOTE: "padnamelist_store" is experimental and may change or be removed without notice.

    Stores the pad name (which may be null) at the given index, freeing any existing pad name in that slot.

     PADNAME **       padnamelist_store(      PADNAMELIST *pnl,
                                              SSize_t key,
                                              PADNAME *val)
     PADNAME **  Perl_padnamelist_store(pTHX_ PADNAMELIST *pnl,
                                              SSize_t key,
                                              PADNAME *val)

"perl_alloc"
    Allocates a new Perl interpreter. See perlembed.

     PerlInterpreter *  perl_alloc()

"PERL_ASYNC_CHECK"
    Described in perlinterp.

     void  PERL_ASYNC_CHECK()

"perl_clone"
    Create and return a new interpreter by cloning the current one.

    "perl_clone" takes these flags as parameters:

    "CLONEf_COPY_STACKS" - is used to, well, copy the stacks also, without it we only clone the data and zero the stacks, with it we copy the stacks and the new perl interpreter is ready to run at the exact same point as the previous one. The pseudo-fork code uses "COPY_STACKS" while the threads->create doesn't.

    "CLONEf_KEEP_PTR_TABLE" - "perl_clone" keeps a ptr_table with the pointer of the old variable as a key and the new variable as a value, this allows it to check if something has been cloned and not clone it again, but rather just use the value and increase the refcount. If "KEEP_PTR_TABLE" is not set then "perl_clone" will kill the ptr_table using the function "ptr_table_free(PL_ptr_table); PL_ptr_table = NULL;". A reason to keep it around is if you want to dup some of your own variables which are outside the graph that perl scans.

    "CLONEf_CLONE_HOST" - This is a win32 thing, it is ignored on unix, it tells perl's win32host code (which is c++) to clone itself, this is needed on win32 if you want to run two threads at the same time, if you just want to do some stuff in a separate perl interpreter and then throw it away and return to the original one, you don't need to do anything.

     PerlInterpreter *  perl_clone(PerlInterpreter *proto_perl,
                                   UV flags)

"perl_construct"
    Initializes a new Perl interpreter. See perlembed.

     void  perl_construct(PerlInterpreter *my_perl)

"perl_destruct"
    Shuts down a Perl interpreter. See perlembed for a tutorial.

    "my_perl" points to the Perl interpreter. It must have been previously created through the use of "perl_alloc" and "perl_construct". It may have been initialised through "perl_parse", and may have been used through "perl_run" and other means. This function should be called for any Perl interpreter that has been constructed with "perl_construct", even if subsequent operations on it failed, for example if "perl_parse" returned a non-zero value.

    If the interpreter's "PL_exit_flags" word has the "PERL_EXIT_DESTRUCT_END" flag set, then this function will execute code in "END" blocks before performing the rest of destruction. If it is desired to make any use of the interpreter between "perl_parse" and "perl_destruct" other than just calling "perl_run", then this flag should be set early on. This matters if "perl_run" will not be called, or if anything else will be done in addition to calling "perl_run".

    Returns a value be a suitable value to pass to the C library function "exit" (or to return from "main"), to serve as an exit code indicating the nature of the way the interpreter terminated. This takes into account any failure of "perl_parse" and any early exit from "perl_run". The exit code is of the type required by the host operating system, so because of differing exit code conventions it is not portable to interpret specific numeric values as having specific meanings.

     int  perl_destruct(PerlInterpreter *my_perl)

"perl_free"
    Releases a Perl interpreter. See perlembed.

     void  perl_free(PerlInterpreter *my_perl)

"PERL_GET_CONTEXT"
    Described in perlguts.

     PerlInterpreter*  PERL_GET_CONTEXT

"perl_parse"
    Tells a Perl interpreter to parse a Perl script. This performs most of the initialisation of a Perl interpreter. See perlembed for a tutorial.

    "my_perl" points to the Perl interpreter that is to parse the script. It must have been previously created through the use of "perl_alloc" and "perl_construct". "xsinit" points to a callback function that will be called to set up the ability for this Perl interpreter to load XS extensions, or may be null to perform no such setup.

    "argc" and "argv" supply a set of command-line arguments to the Perl interpreter, as would normally be passed to the "main" function of a C program. "argv[argc]" must be null. These arguments are where the script to parse is specified, either by naming a script file or by providing a script in a "-e" option. If $0 will be written to in the Perl interpreter, then the argument strings must be in writable memory, and so mustn't just be string constants.

    "env" specifies a set of environment variables that will be used by this Perl interpreter. If non-null, it must point to a null-terminated array of environment strings. If null, the Perl interpreter will use the environment supplied by the "environ" global variable.

    This function initialises the interpreter, and parses and compiles the script specified by the command-line arguments. This includes executing code in "BEGIN", "UNITCHECK", and "CHECK" blocks. It does not execute "INIT" blocks or the main program.

    Returns an integer of slightly tricky interpretation. The correct use of the return value is as a truth value indicating whether there was a failure in initialisation. If zero is returned, this indicates that initialisation was successful, and it is safe to proceed to call "perl_run" and make other use of it. If a non-zero value is returned, this indicates some problem that means the interpreter wants to terminate. The interpreter should not be just abandoned upon such failure; the caller should proceed to shut the interpreter down cleanly with "perl_destruct" and free it with "perl_free".

    For historical reasons, the non-zero return value also attempts to be a suitable value to pass to the C library function "exit" (or to return from "main"), to serve as an exit code indicating the nature of the way initialisation terminated. However, this isn't portable, due to differing exit code conventions. An attempt is made to return an exit code of the type required by the host operating system, but because it is constrained to be non-zero, it is not necessarily possible to indicate every type of exit. It is only reliable on Unix, where a zero exit code can be augmented with a set bit that will be ignored. In any case, this function is not the correct place to acquire an exit code: one should get that from "perl_destruct".

     int  perl_parse(PerlInterpreter *my_perl, XSINIT_t xsinit,
                     int argc, char **argv, char **env)

"perl_run"
    Tells a Perl interpreter to run its main program. See perlembed for a tutorial.

    "my_perl" points to the Perl interpreter. It must have been previously created through the use of "perl_alloc" and "perl_construct", and initialised through "perl_parse". This function should not be called if "perl_parse" returned a non-zero value, indicating a failure in initialisation or compilation.

    This function executes code in "INIT" blocks, and then executes the main program. The code to be executed is that established by the prior call to "perl_parse". If the interpreter's "PL_exit_flags" word does not have the "PERL_EXIT_DESTRUCT_END" flag set, then this function will also execute code in "END" blocks. If it is desired to make any further use of the interpreter after calling this function, then "END" blocks should be postponed to "perl_destruct" time by setting that flag.

    Returns an integer of slightly tricky interpretation. The correct use of the return value is as a truth value indicating whether the program terminated non-locally. If zero is returned, this indicates that the program ran to completion, and it is safe to make other use of the interpreter (provided that the "PERL_EXIT_DESTRUCT_END" flag was set as described above). If a non-zero value is returned, this indicates that the interpreter wants to terminate early. The interpreter should not be just abandoned because of this desire to terminate; the caller should proceed to shut the interpreter down cleanly with "perl_destruct" and free it with "perl_free".

    For historical reasons, the non-zero return value also attempts to be a suitable value to pass to the C library function "exit" (or to return from "main"), to serve as an exit code indicating the nature of the way the program terminated. However, this isn't portable, due to differing exit code conventions. An attempt is made to return an exit code of the type required by the host operating system, but because it is constrained to be non-zero, it is not necessarily possible to indicate every type of exit. It is only reliable on Unix, where a zero exit code can be augmented with a set bit that will be ignored. In any case, this function is not the correct place to acquire an exit code: one should get that from "perl_destruct".

     int  perl_run(PerlInterpreter *my_perl)

"PERL_SET_CONTEXT"
    Described in perlguts.

     void  PERL_SET_CONTEXT(PerlInterpreter* i)

"PERL_SYS_INIT"
"PERL_SYS_INIT3"
    These provide system-specific tune up of the C runtime environment necessary to run Perl interpreters. Only one should be used, and it should be called only once, before creating any Perl interpreters.

    They differ in that "PERL_SYS_INIT3" also initializes "env".

     void  PERL_SYS_INIT (int *argc, char*** argv)
     void  PERL_SYS_INIT3(int *argc, char*** argv, char*** env)

"PERL_SYS_TERM"
    Provides system-specific clean up of the C runtime environment after running Perl interpreters. This should be called only once, after freeing any remaining Perl interpreters.

     void  PERL_SYS_TERM()

"PerlInterpreter"
    Described in perlembed.

"PL_exit_flags"
    Contains flags controlling perl's behaviour on exit():

    •   "PERL_EXIT_DESTRUCT_END"

        If set, END blocks are executed when the interpreter is destroyed. This is normally set by perl itself after the interpreter is constructed.

    •   "PERL_EXIT_ABORT"

        Call abort() on exit. This is used internally by perl itself to abort if exit is called while processing exit.

    •   "PERL_EXIT_WARN"

        Warn on exit.

    •   "PERL_EXIT_EXPECTED"

        Set by the "exit" in perlfunc operator.

     U8  PL_exit_flags

"PL_origalen"
    Described in perlembed.

"PL_perl_destruct_level"
    This value may be set when embedding for full cleanup.

    Possible values:

    •   0 - none

    •   1 - full

    •   2 or greater - full with checks.

    If $ENV{PERL_DESTRUCT_LEVEL} is set to an integer greater than the value of "PL_perl_destruct_level" its value is used instead.

    On threaded perls, each thread has an independent copy of this variable; each initialized at creation time with the current value of the creating thread's copy.

     signed char  PL_perl_destruct_level

"ptr_table_fetch"
    Look for "sv" in the pointer-mapping table "tbl", returning its value, or NULL if not found.

     void *       ptr_table_fetch(      PTR_TBL_t * const tbl,
                                        const void * const sv)
     void *  Perl_ptr_table_fetch(pTHX_ PTR_TBL_t * const tbl,
                                        const void * const sv)

"ptr_table_free"
    Clear and free a ptr table

     void       ptr_table_free(      PTR_TBL_t * const tbl)
     void  Perl_ptr_table_free(pTHX_ PTR_TBL_t * const tbl)

"ptr_table_new"
    Create a new pointer-mapping table

     PTR_TBL_t *       ptr_table_new()
     PTR_TBL_t *  Perl_ptr_table_new(pTHX)

"ptr_table_split"
    Double the hash bucket size of an existing ptr table

     void       ptr_table_split(      PTR_TBL_t * const tbl)
     void  Perl_ptr_table_split(pTHX_ PTR_TBL_t * const tbl)

"ptr_table_store"
    Add a new entry to a pointer-mapping table "tbl". In hash terms, "oldsv" is the key; Cnewsv> is the value.

    The names "old" and "new" are specific to the core's typical use of ptr_tables in thread cloning.

     void       ptr_table_store(      PTR_TBL_t * const tbl,
                                      const void * const oldsv,
                                      void * const newsv)
     void  Perl_ptr_table_store(pTHX_ PTR_TBL_t * const tbl,
                                      const void * const oldsv,
                                      void * const newsv)

"require_pv"
    Tells Perl to "require" the file named by the string argument. It is analogous to the Perl code "eval "require '$file'"". It's even implemented that way; consider using load_module instead.

    NOTE: the perl_require_pv() form is deprecated.

     void       require_pv(      const char *pv)
     void  Perl_require_pv(pTHX_ const char *pv)

"vload_module"
    Like "load_module" but the arguments are an encapsulated argument list.

     void       vload_module(      U32 flags, SV *name, SV *ver,
                                   va_list *args)
     void  Perl_vload_module(pTHX_ U32 flags, SV *name, SV *ver,
                                   va_list *args)

Errno

"sv_string_from_errnum"
    Generates the message string describing an OS error and returns it as an SV. "errnum" must be a value that "errno" could take, identifying the type of error.

    If "tgtsv" is non-null then the string will be written into that SV (overwriting existing content) and it will be returned. If "tgtsv" is a null pointer then the string will be written into a new mortal SV which will be returned.

    The message will be taken from whatever locale would be used by $!, and will be encoded in the SV in whatever manner would be used by $!. The details of this process are subject to future change. Currently, the message is taken from the C locale by default (usually producing an English message), and from the currently selected locale when in the scope of the "use locale" pragma. A heuristic attempt is made to decode the message from the locale's character encoding, but it will only be decoded as either UTF-8 or ISO-8859-1. It is always correctly decoded in a UTF-8 locale, usually in an ISO-8859-1 locale, and never in any other locale.

    The SV is always returned containing an actual string, and with no other OK bits set. Unlike $!, a message is even yielded for "errnum" zero (meaning success), and if no useful message is available then a useless string (currently empty) is returned.

     SV *       sv_string_from_errnum(      int errnum, SV *tgtsv)
     SV *  Perl_sv_string_from_errnum(pTHX_ int errnum, SV *tgtsv)

Exception Handling (simple) Macros

"dXCPT"
    Set up necessary local variables for exception handling. See "Exception Handling" in perlguts.

       dXCPT;

"JMPENV_JUMP"
"JMPENV_PUSH"
"PL_restartop"
    Described in perlinterp.

     void  JMPENV_JUMP (int v)
     void  JMPENV_PUSH (int v)
     OP *  PL_restartop

"XCPT_CATCH"
    Introduces a catch block. See "Exception Handling" in perlguts.

"XCPT_RETHROW"
    Rethrows a previously caught exception. See "Exception Handling" in perlguts.

       XCPT_RETHROW;

"XCPT_TRY_END"
    Ends a try block. See "Exception Handling" in perlguts.

"XCPT_TRY_START"
    Starts a try block. See "Exception Handling" in perlguts.

Filesystem configuration values
Also see "List of capability HAS_foo symbols".

"DIRNAMLEN"
    This symbol, if defined, indicates to the C program that the length of directory entry names is provided by a "d_namlen" field. Otherwise you need to do strlen() on the "d_name" field.

"DOSUID"
    This symbol, if defined, indicates that the C program should check the script that it is executing for setuid/setgid bits, and attempt to emulate setuid/setgid on systems that have disabled setuid #! scripts because the kernel can't do it securely. It is up to the package designer to make sure that this emulation is done securely. Among other things, it should do an fstat on the script it just opened to make sure it really is a setuid/setgid script, it should make sure the arguments passed correspond exactly to the argument on the #! line, and it should not trust any subprocesses to which it must pass the filename rather than the file descriptor of the script to be executed.

"EOF_NONBLOCK"
    This symbol, if defined, indicates to the C program that a read() on a non-blocking file descriptor will return 0 on "EOF", and not the value held in "RD_NODATA" (-1 usually, in that case!).

"FCNTL_CAN_LOCK"
    This symbol, if defined, indicates that fcntl() can be used for file locking. Normally on Unix systems this is defined. It may be undefined on "VMS".

"FFLUSH_ALL"
    This symbol, if defined, tells that to flush all pending stdio output one must loop through all the stdio file handles stored in an array and fflush them. Note that if "fflushNULL" is defined, fflushall will not even be probed for and will be left undefined.

"FFLUSH_NULL"
    This symbol, if defined, tells that fflush(NULL) correctly flushes all pending stdio output without side effects. In particular, on some platforms calling fflush(NULL) *still* corrupts "STDIN" if it is a pipe.

"FILE_base"
    This macro is used to access the "_base" field (or equivalent) of the "FILE" structure pointed to by its argument. This macro will always be defined if "USE_STDIO_BASE" is defined.

     void *  FILE_base(FILE * f)

"FILE_bufsiz"
    This macro is used to determine the number of bytes in the I/O buffer pointed to by "_base" field (or equivalent) of the "FILE" structure pointed to its argument. This macro will always be defined if "USE_STDIO_BASE" is defined.

     Size_t  FILE_bufsiz(FILE *f)

"FILE_cnt"
    This macro is used to access the "_cnt" field (or equivalent) of the "FILE" structure pointed to by its argument. This macro will always be defined if "USE_STDIO_PTR" is defined.

     Size_t  FILE_cnt(FILE * f)

"FILE_ptr"
    This macro is used to access the "_ptr" field (or equivalent) of the "FILE" structure pointed to by its argument. This macro will always be defined if "USE_STDIO_PTR" is defined.

     void *  FILE_ptr(FILE * f)

"FLEXFILENAMES"
    This symbol, if defined, indicates that the system supports filenames longer than 14 characters.

"HAS_DIR_DD_FD"
    This symbol, if defined, indicates that the "DIR"* dirstream structure contains a member variable named "dd_fd".

"HAS_DUP2"
    This symbol, if defined, indicates that the "dup2" routine is available to duplicate file descriptors.

"HAS_DUP3"
    This symbol, if defined, indicates that the "dup3" routine is available to duplicate file descriptors.

"HAS_FAST_STDIO"
    This symbol, if defined, indicates that the "fast stdio" is available to manipulate the stdio buffers directly.

"HAS_FCHDIR"
    This symbol, if defined, indicates that the "fchdir" routine is available to change directory using a file descriptor.

"HAS_FCNTL"
    This symbol, if defined, indicates to the C program that the fcntl() function exists.

"HAS_FDCLOSE"
    This symbol, if defined, indicates that the "fdclose" routine is available to free a "FILE" structure without closing the underlying file descriptor. This function appeared in "FreeBSD" 10.2.

"HAS_FDOPENDIR"
    This symbol, if defined, indicates that the "fdopendir" routine is available to open a directory descriptor.

"HAS_FPATHCONF"
    This symbol, if defined, indicates that pathconf() is available to determine file-system related limits and options associated with a given open file descriptor.

"HAS_FPOS64_T"
    This symbol will be defined if the C compiler supports "fpos64_t".

"HAS_FSTATFS"
    This symbol, if defined, indicates that the "fstatfs" routine is available to stat filesystems by file descriptors.

"HAS_FSTATVFS"
    This symbol, if defined, indicates that the "fstatvfs" routine is available to stat filesystems by file descriptors.

"HAS_GETFSSTAT"
    This symbol, if defined, indicates that the "getfsstat" routine is available to stat filesystems in bulk.

"HAS_GETMNT"
    This symbol, if defined, indicates that the "getmnt" routine is available to get filesystem mount info by filename.

"HAS_GETMNTENT"
    This symbol, if defined, indicates that the "getmntent" routine is available to iterate through mounted file systems to get their info.

"HAS_HASMNTOPT"
    This symbol, if defined, indicates that the "hasmntopt" routine is available to query the mount options of file systems.

"HAS_LSEEK_PROTO"
    This symbol, if defined, indicates that the system provides a prototype for the lseek() function. Otherwise, it is up to the program to supply one. A good guess is

     extern off_t lseek(int, off_t, int);

"HAS_MKDIR"
    This symbol, if defined, indicates that the "mkdir" routine is available to create directories. Otherwise you should fork off a new process to exec /bin/mkdir.

"HAS_OFF64_T"
    This symbol will be defined if the C compiler supports "off64_t".

"HAS_OPENAT"
    This symbol is defined if the openat() routine is available.

"HAS_OPEN3"
    This manifest constant lets the C program know that the three argument form of open(2) is available.

"HAS_POLL"
    This symbol, if defined, indicates that the "poll" routine is available to "poll" active file descriptors. Please check "I_POLL" and "I_SYS_POLL" to know which header should be included as well.

"HAS_READDIR"
    This symbol, if defined, indicates that the "readdir" routine is available to read directory entries. You may have to include dirent.h. See "I_DIRENT".

"HAS_READDIR64_R"
    This symbol, if defined, indicates that the "readdir64_r" routine is available to readdir64 re-entrantly.

"HAS_REWINDDIR"
    This symbol, if defined, indicates that the "rewinddir" routine is available. You may have to include dirent.h. See "I_DIRENT".

"HAS_RMDIR"
    This symbol, if defined, indicates that the "rmdir" routine is available to remove directories. Otherwise you should fork off a new process to exec /bin/rmdir.

"HAS_SEEKDIR"
    This symbol, if defined, indicates that the "seekdir" routine is available. You may have to include dirent.h. See "I_DIRENT".

"HAS_SELECT"
    This symbol, if defined, indicates that the "select" routine is available to "select" active file descriptors. If the timeout field is used, sys/time.h may need to be included.

"HAS_SETVBUF"
    This symbol, if defined, indicates that the "setvbuf" routine is available to change buffering on an open stdio stream. to a line-buffered mode.

"HAS_STDIO_STREAM_ARRAY"
    This symbol, if defined, tells that there is an array holding the stdio streams.

"HAS_STRUCT_FS_DATA"
    This symbol, if defined, indicates that the "struct fs_data" to do statfs() is supported.

"HAS_STRUCT_STATFS"
    This symbol, if defined, indicates that the "struct statfs" to do statfs() is supported.

"HAS_STRUCT_STATFS_F_FLAGS"
    This symbol, if defined, indicates that the "struct statfs" does have the "f_flags" member containing the mount flags of the filesystem containing the file. This kind of "struct statfs" is coming from sys/mount.h ("BSD" 4.3), not from sys/statfs.h ("SYSV"). Older "BSDs" (like Ultrix) do not have statfs() and "struct statfs", they have ustat() and getmnt() with "struct ustat" and "struct fs_data".

"HAS_TELLDIR"
    This symbol, if defined, indicates that the "telldir" routine is available. You may have to include dirent.h. See "I_DIRENT".

"HAS_USTAT"
    This symbol, if defined, indicates that the "ustat" system call is available to query file system statistics by "dev_t".

"I_FCNTL"
    This manifest constant tells the C program to include fcntl.h.

     #ifdef I_FCNTL
         #include <fcntl.h>
     #endif

"I_SYS_DIR"
    This symbol, if defined, indicates to the C program that it should include sys/dir.h.

     #ifdef I_SYS_DIR
         #include <sys_dir.h>
     #endif

"I_SYS_FILE"
    This symbol, if defined, indicates to the C program that it should include sys/file.h to get definition of "R_OK" and friends.

     #ifdef I_SYS_FILE
         #include <sys_file.h>
     #endif

"I_SYS_NDIR"
    This symbol, if defined, indicates to the C program that it should include sys/ndir.h.

     #ifdef I_SYS_NDIR
         #include <sys_ndir.h>
     #endif

"I_SYS_STATFS"
    This symbol, if defined, indicates that sys/statfs.h exists.

     #ifdef I_SYS_STATFS
         #include <sys_statfs.h>
     #endif

"LSEEKSIZE"
    This symbol holds the number of bytes used by the "Off_t".

"RD_NODATA"
    This symbol holds the return code from read() when no data is present on the non-blocking file descriptor. Be careful! If "EOF_NONBLOCK" is not defined, then you can't distinguish between no data and "EOF" by issuing a read(). You'll have to find another way to tell for sure!

"READDIR64_R_PROTO"
    This symbol encodes the prototype of "readdir64_r". It is zero if "d_readdir64_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_readdir64_r" is defined.

"ST_INO_SIGN"
    This symbol holds the signedness of "struct stat"'s "st_ino". 1 for unsigned, -1 for signed.

"ST_INO_SIZE"
    This variable contains the size of "struct stat"'s "st_ino" in bytes.

"STDCHAR"
    This symbol is defined to be the type of char used in stdio.h. It has the values "unsigned char" or "char".

"STDIO_CNT_LVALUE"
    This symbol is defined if the "FILE_cnt" macro can be used as an lvalue.

"STDIO_PTR_LVAL_NOCHANGE_CNT"
    This symbol is defined if using the "FILE_ptr" macro as an lvalue to increase the pointer by n leaves File_cnt(fp) unchanged.

"STDIO_PTR_LVAL_SETS_CNT"
    This symbol is defined if using the "FILE_ptr" macro as an lvalue to increase the pointer by n has the side effect of decreasing the value of File_cnt(fp) by n.

"STDIO_PTR_LVALUE"
    This symbol is defined if the "FILE_ptr" macro can be used as an lvalue.

"STDIO_STREAM_ARRAY"
    This symbol tells the name of the array holding the stdio streams. Usual values include "_iob", "__iob", and "__sF".

"VAL_EAGAIN"
    This symbol holds the errno error code set by read() when no data was present on the non-blocking file descriptor.

"VAL_O_NONBLOCK"
    This symbol is to be used during open() or fcntl(F_SETFL) to turn on non-blocking I/O for the file descriptor. Note that there is no way back, i.e. you cannot turn it blocking again this way. If you wish to alternatively switch between blocking and non-blocking, use the ioctl(FIOSNBIO) call instead, but that is not supported by all devices.

"VOID_CLOSEDIR"
    This symbol, if defined, indicates that the closedir() routine does not return a value.

Floating point
Also "List of capability HAS_foo symbols" lists capabilities that arent in this section. For example "HAS_ASINH", for the hyperbolic sine function.

"CASTFLAGS"
    This symbol contains flags that say what difficulties the compiler has casting odd floating values to unsigned long:

     0 = ok
     1 = couldn't cast < 0
     2 = couldn't cast >= 0x80000000
     4 = couldn't cast in argument expression list

"CASTNEGFLOAT"
    This symbol is defined if the C compiler can cast negative numbers to unsigned longs, ints and shorts.

"DOUBLE_HAS_INF"
    This symbol, if defined, indicates that the double has the infinity.

"DOUBLE_HAS_NAN"
    This symbol, if defined, indicates that the double has the not-a-number.

"DOUBLE_HAS_NEGATIVE_ZERO"
    This symbol, if defined, indicates that the double has the "negative_zero".

"DOUBLE_HAS_SUBNORMALS"
    This symbol, if defined, indicates that the double has the subnormals (denormals).

"DOUBLE_STYLE_CRAY"
    This symbol, if defined, indicates that the double is the 64-bit "CRAY" mainframe format.

"DOUBLE_STYLE_IBM"
    This symbol, if defined, indicates that the double is the 64-bit "IBM" mainframe format.

"DOUBLE_STYLE_IEEE"
    This symbol, if defined, indicates that the double is the 64-bit "IEEE" 754.

"DOUBLE_STYLE_VAX"
    This symbol, if defined, indicates that the double is the 64-bit "VAX" format D or G.

"DOUBLEINFBYTES"
    This symbol, if defined, is a comma-separated list of hexadecimal bytes for the double precision infinity.

"DOUBLEKIND"
    "DOUBLEKIND" will be one of "DOUBLE_IS_IEEE_754_32_BIT_LITTLE_ENDIAN" "DOUBLE_IS_IEEE_754_32_BIT_BIG_ENDIAN" "DOUBLE_IS_IEEE_754_64_BIT_LITTLE_ENDIAN" "DOUBLE_IS_IEEE_754_64_BIT_BIG_ENDIAN" "DOUBLE_IS_IEEE_754_128_BIT_LITTLE_ENDIAN" "DOUBLE_IS_IEEE_754_128_BIT_BIG_ENDIAN" "DOUBLE_IS_IEEE_754_64_BIT_MIXED_ENDIAN_LE_BE" "DOUBLE_IS_IEEE_754_64_BIT_MIXED_ENDIAN_BE_LE" "DOUBLE_IS_VAX_F_FLOAT" "DOUBLE_IS_VAX_D_FLOAT" "DOUBLE_IS_VAX_G_FLOAT" "DOUBLE_IS_IBM_SINGLE_32_BIT" "DOUBLE_IS_IBM_DOUBLE_64_BIT" "DOUBLE_IS_CRAY_SINGLE_64_BIT" "DOUBLE_IS_UNKNOWN_FORMAT"

"DOUBLEMANTBITS"
    This symbol, if defined, tells how many mantissa bits there are in double precision floating point format. Note that this is usually "DBL_MANT_DIG" minus one, since with the standard "IEEE" 754 formats "DBL_MANT_DIG" includes the implicit bit, which doesn't really exist.

"DOUBLENANBYTES"
    This symbol, if defined, is a comma-separated list of hexadecimal bytes (0xHH) for the double precision not-a-number.

"DOUBLESIZE"
    This symbol contains the size of a double, so that the C preprocessor can make decisions based on it.

"Gconvert"
    This preprocessor macro is defined to convert a floating point number to a string without a trailing decimal point. This emulates the behavior of sprintf("%g"), but is sometimes much more efficient. If gconvert() is not available, but gcvt() drops the trailing decimal point, then gcvt() is used. If all else fails, a macro using sprintf("%g") is used. Arguments for the Gconvert macro are: value, number of digits, whether trailing zeros should be retained, and the output buffer. The usual values are:

     d_Gconvert='gconvert((x),(n),(t),(b))'
     d_Gconvert='gcvt((x),(n),(b))'
     d_Gconvert='sprintf((b),"%.*g",(n),(x))'

    The last two assume trailing zeros should not be kept.

     char *  Gconvert(double x, Size_t n, bool t, char * b)

"HAS_ATOLF"
    This symbol, if defined, indicates that the "atolf" routine is available to convert strings into long doubles.

"HAS_CLASS"
    This symbol, if defined, indicates that the "class" routine is available to classify doubles. Available for example in "AIX". The returned values are defined in float.h and are:

     FP_PLUS_NORM    Positive normalized, nonzero
     FP_MINUS_NORM   Negative normalized, nonzero
     FP_PLUS_DENORM  Positive denormalized, nonzero
     FP_MINUS_DENORM Negative denormalized, nonzero
     FP_PLUS_ZERO    +0.0
     FP_MINUS_ZERO   -0.0
     FP_PLUS_INF     +INF
     FP_MINUS_INF    -INF
     FP_NANS         Signaling Not a Number (NaNS)
     FP_NANQ         Quiet Not a Number (NaNQ)

"HAS_FINITE"
    This symbol, if defined, indicates that the "finite" routine is available to check whether a double is "finite" (non-infinity non-NaN).

"HAS_FINITEL"
    This symbol, if defined, indicates that the "finitel" routine is available to check whether a long double is finite (non-infinity non-NaN).

"HAS_FP_CLASS"
    This symbol, if defined, indicates that the "fp_class" routine is available to classify doubles. Available for example in Digital "UNIX". The returned values are defined in math.h and are:

     FP_SNAN           Signaling NaN (Not-a-Number)
     FP_QNAN           Quiet NaN (Not-a-Number)
     FP_POS_INF        +infinity
     FP_NEG_INF        -infinity
     FP_POS_NORM       Positive normalized
     FP_NEG_NORM       Negative normalized
     FP_POS_DENORM     Positive denormalized
     FP_NEG_DENORM     Negative denormalized
     FP_POS_ZERO       +0.0 (positive zero)
     FP_NEG_ZERO       -0.0 (negative zero)

"HAS_FP_CLASSIFY"
    This symbol, if defined, indicates that the "fp_classify" routine is available to classify doubles. The values are defined in math.h

     FP_NORMAL     Normalized
     FP_ZERO       Zero
     FP_INFINITE   Infinity
     FP_SUBNORMAL  Denormalized
     FP_NAN        NaN

"HAS_FP_CLASSL"
    This symbol, if defined, indicates that the "fp_classl" routine is available to classify long doubles. Available for example in Digital "UNIX". See for possible values "HAS_FP_CLASS".

"HAS_FPCLASS"
    This symbol, if defined, indicates that the "fpclass" routine is available to classify doubles. Available for example in Solaris/"SVR4". The returned values are defined in ieeefp.h and are:

     FP_SNAN         signaling NaN
     FP_QNAN         quiet NaN
     FP_NINF         negative infinity
     FP_PINF         positive infinity
     FP_NDENORM      negative denormalized non-zero
     FP_PDENORM      positive denormalized non-zero
     FP_NZERO        negative zero
     FP_PZERO        positive zero
     FP_NNORM        negative normalized non-zero
     FP_PNORM        positive normalized non-zero

"HAS_FPCLASSIFY"
    This symbol, if defined, indicates that the "fpclassify" routine is available to classify doubles. Available for example in HP-UX. The returned values are defined in math.h and are

     FP_NORMAL     Normalized
     FP_ZERO       Zero
     FP_INFINITE   Infinity
     FP_SUBNORMAL  Denormalized
     FP_NAN        NaN

"HAS_FPCLASSL"
    This symbol, if defined, indicates that the "fpclassl" routine is available to classify long doubles. Available for example in "IRIX". The returned values are defined in ieeefp.h and are:

     FP_SNAN         signaling NaN
     FP_QNAN         quiet NaN
     FP_NINF         negative infinity
     FP_PINF         positive infinity
     FP_NDENORM      negative denormalized non-zero
     FP_PDENORM      positive denormalized non-zero
     FP_NZERO        negative zero
     FP_PZERO        positive zero
     FP_NNORM        negative normalized non-zero
     FP_PNORM        positive normalized non-zero

"HAS_FPGETROUND"
    This symbol, if defined, indicates that the "fpgetround" routine is available to get the floating point rounding mode.

"HAS_FREXPL"
    This symbol, if defined, indicates that the "frexpl" routine is available to break a long double floating-point number into a normalized fraction and an integral power of 2.

"HAS_ILOGB"
    This symbol, if defined, indicates that the "ilogb" routine is available to get integer exponent of a floating-point value.

"HAS_ISFINITE"
    This symbol, if defined, indicates that the "isfinite" routine is available to check whether a double is finite (non-infinity non-NaN).

"HAS_ISFINITEL"
    This symbol, if defined, indicates that the "isfinitel" routine is available to check whether a long double is finite. (non-infinity non-NaN).

"HAS_ISINF"
    This symbol, if defined, indicates that the "isinf" routine is available to check whether a double is an infinity.

"HAS_ISINFL"
    This symbol, if defined, indicates that the "isinfl" routine is available to check whether a long double is an infinity.

"HAS_ISNAN"
    This symbol, if defined, indicates that the "isnan" routine is available to check whether a double is a NaN.

"HAS_ISNANL"
    This symbol, if defined, indicates that the "isnanl" routine is available to check whether a long double is a NaN.

"HAS_ISNORMAL"
    This symbol, if defined, indicates that the "isnormal" routine is available to check whether a double is normal (non-zero normalized).

"HAS_J0"
    This symbol, if defined, indicates to the C program that the j0() function is available for Bessel functions of the first kind of the order zero, for doubles.

"HAS_J0L"
    This symbol, if defined, indicates to the C program that the j0l() function is available for Bessel functions of the first kind of the order zero, for long doubles.

"HAS_LDBL_DIG"
    This symbol, if defined, indicates that this system's float.h or limits.h defines the symbol "LDBL_DIG", which is the number of significant digits in a long double precision number. Unlike for "DBL_DIG", there's no good guess for "LDBL_DIG" if it is undefined.

"HAS_LDEXPL"
    This symbol, if defined, indicates that the "ldexpl" routine is available to shift a long double floating-point number by an integral power of 2.

"HAS_LLRINT"
    This symbol, if defined, indicates that the "llrint" routine is available to return the long long value closest to a double (according to the current rounding mode).

"HAS_LLRINTL"
    This symbol, if defined, indicates that the "llrintl" routine is available to return the long long value closest to a long double (according to the current rounding mode).

"HAS_LLROUNDL"
    This symbol, if defined, indicates that the "llroundl" routine is available to return the nearest long long value away from zero of the long double argument value.

"HAS_LONG_DOUBLE"
    This symbol will be defined if the C compiler supports long doubles.

"HAS_LRINT"
    This symbol, if defined, indicates that the "lrint" routine is available to return the integral value closest to a double (according to the current rounding mode).

"HAS_LRINTL"
    This symbol, if defined, indicates that the "lrintl" routine is available to return the integral value closest to a long double (according to the current rounding mode).

"HAS_LROUNDL"
    This symbol, if defined, indicates that the "lroundl" routine is available to return the nearest integral value away from zero of the long double argument value.

"HAS_MODFL"
    This symbol, if defined, indicates that the "modfl" routine is available to split a long double x into a fractional part f and an integer part i such that |f| < 1.0 and (f + i) = x.

"HAS_NAN"
    This symbol, if defined, indicates that the "nan" routine is available to generate NaN.

"HAS_NEXTTOWARD"
    This symbol, if defined, indicates that the "nexttoward" routine is available to return the next machine representable long double from x in direction y.

"HAS_REMAINDER"
    This symbol, if defined, indicates that the "remainder" routine is available to return the floating-point "remainder".

"HAS_SCALBN"
    This symbol, if defined, indicates that the "scalbn" routine is available to multiply floating-point number by integral power of radix.

"HAS_SIGNBIT"
    This symbol, if defined, indicates that the "signbit" routine is available to check if the given number has the sign bit set. This should include correct testing of -0.0. This will only be set if the signbit() routine is safe to use with the NV type used internally in perl. Users should call Perl_signbit(), which will be #defined to the system's signbit() function or macro if this symbol is defined.

"HAS_SQRTL"
    This symbol, if defined, indicates that the "sqrtl" routine is available to do long double square roots.

"HAS_STRTOD_L"
    This symbol, if defined, indicates that the "strtod_l" routine is available to convert strings to long doubles.

"HAS_STRTOLD"
    This symbol, if defined, indicates that the "strtold" routine is available to convert strings to long doubles.

"HAS_STRTOLD_L"
    This symbol, if defined, indicates that the "strtold_l" routine is available to convert strings to long doubles.

"HAS_TRUNC"
    This symbol, if defined, indicates that the "trunc" routine is available to round doubles towards zero.

"HAS_UNORDERED"
    This symbol, if defined, indicates that the "unordered" routine is available to check whether two doubles are "unordered" (effectively: whether either of them is NaN)

"I_FENV"
    This symbol, if defined, indicates to the C program that it should include fenv.h to get the floating point environment definitions.

     #ifdef I_FENV
         #include <fenv.h>
     #endif

"I_QUADMATH"
    This symbol, if defined, indicates that quadmath.h exists and should be included.

     #ifdef I_QUADMATH
         #include <quadmath.h>
     #endif

"LONG_DOUBLE_STYLE_IEEE"
    This symbol, if defined, indicates that the long double is any of the "IEEE" 754 style long doubles: "LONG_DOUBLE_STYLE_IEEE_STD", "LONG_DOUBLE_STYLE_IEEE_EXTENDED", "LONG_DOUBLE_STYLE_IEEE_DOUBLEDOUBLE".

"LONG_DOUBLE_STYLE_IEEE_DOUBLEDOUBLE"
    This symbol, if defined, indicates that the long double is the 128-bit double-double.

"LONG_DOUBLE_STYLE_IEEE_EXTENDED"
    This symbol, if defined, indicates that the long double is the 80-bit "IEEE" 754. Note that despite the 'extended' this is less than the 'std', since this is an extension of the double precision.

"LONG_DOUBLE_STYLE_IEEE_STD"
    This symbol, if defined, indicates that the long double is the 128-bit "IEEE" 754.

"LONG_DOUBLE_STYLE_VAX"
    This symbol, if defined, indicates that the long double is the 128-bit "VAX" format H.

"LONG_DOUBLEKIND"
    "LONG_DOUBLEKIND" will be one of "LONG_DOUBLE_IS_DOUBLE" "LONG_DOUBLE_IS_IEEE_754_128_BIT_LITTLE_ENDIAN" "LONG_DOUBLE_IS_IEEE_754_128_BIT_BIG_ENDIAN" "LONG_DOUBLE_IS_X86_80_BIT_LITTLE_ENDIAN" "LONG_DOUBLE_IS_X86_80_BIT_BIG_ENDIAN" "LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_LE_LE" "LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_BE_BE" "LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_LE_BE" "LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_BE_LE" "LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_LITTLE_ENDIAN" "LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_BIG_ENDIAN" "LONG_DOUBLE_IS_VAX_H_FLOAT" "LONG_DOUBLE_IS_UNKNOWN_FORMAT" It is only defined if the system supports long doubles.

"LONG_DOUBLESIZE"
    This symbol contains the size of a long double, so that the C preprocessor can make decisions based on it. It is only defined if the system supports long doubles. Note that this is "sizeof(long double)", which may include unused bytes.

"LONGDBLINFBYTES"
    This symbol, if defined, is a comma-separated list of hexadecimal bytes for the long double precision infinity.

"LONGDBLMANTBITS"
    This symbol, if defined, tells how many mantissa bits there are in long double precision floating point format. Note that this can be "LDBL_MANT_DIG" minus one, since "LDBL_MANT_DIG" can include the "IEEE" 754 implicit bit. The common x86-style 80-bit long double does not have an implicit bit.

"LONGDBLNANBYTES"
    This symbol, if defined, is a comma-separated list of hexadecimal bytes (0xHH) for the long double precision not-a-number.

"NV"
    Described in perlguts.

"NV_OVERFLOWS_INTEGERS_AT"
    This symbol gives the largest integer value that NVs can hold. This value + 1.0 cannot be stored accurately. It is expressed as constant floating point expression to reduce the chance of decimal/binary conversion issues. If it can not be determined, the value 0 is given.

"NV_PRESERVES_UV"
    This symbol, if defined, indicates that a variable of type "NVTYPE" can preserve all the bits of a variable of type "UVTYPE".

"NV_PRESERVES_UV_BITS"
    This symbol contains the number of bits a variable of type "NVTYPE" can preserve of a variable of type "UVTYPE".

"NV_ZERO_IS_ALLBITS_ZERO"
    This symbol, if defined, indicates that a variable of type "NVTYPE" stores 0.0 in memory as all bits zero.

"NVMANTBITS"
    This symbol, if defined, tells how many mantissa bits (not including implicit bit) there are in a Perl NV. This depends on which floating point type was chosen.

"NVSIZE"
    This symbol contains the sizeof(NV). Note that some floating point formats have unused bytes. The most notable example is the x86* 80-bit extended precision which comes in byte sizes of 12 and 16 (for 32 and 64 bit platforms, respectively), but which only uses 10 bytes. Perl compiled with "-Duselongdouble" on x86* is like this.

"NVTYPE"
    This symbol defines the C type used for Perl's NV.

General Configuration
This section contains configuration information not otherwise found in the more specialized sections of this document. At the end is a list of "#defines" whose name should be enough to tell you what they do, and a list of #defines which tell you if you need to "#include" files to get the corresponding functionality.

"ASCIIish"
    A preprocessor symbol that is defined iff the system is an ASCII platform; this symbol would not be defined on "EBCDIC" platforms.

     #ifdef  ASCIIish

"BYTEORDER"
    This symbol holds the hexadecimal constant defined in byteorder, in a UV, i.e. 0x1234 or 0x4321 or 0x12345678, etc... If the compiler supports cross-compiling or multiple-architecture binaries, use compiler-defined macros to determine the byte order.

"CAT2"
    This macro concatenates 2 tokens together.

     token  CAT2(token x, token y)

"CHARBITS"
    This symbol contains the size of a char, so that the C preprocessor can make decisions based on it.

"DB_VERSION_MAJOR_CFG"
    This symbol, if defined, defines the major version number of Berkeley DB found in the db.h header when Perl was configured.

"DB_VERSION_MINOR_CFG"
    This symbol, if defined, defines the minor version number of Berkeley DB found in the db.h header when Perl was configured. For DB version 1 this is always 0.

"DB_VERSION_PATCH_CFG"
    This symbol, if defined, defines the patch version number of Berkeley DB found in the db.h header when Perl was configured. For DB version 1 this is always 0.

"DEFAULT_INC_EXCLUDES_DOT"
    This symbol, if defined, removes the legacy default behavior of including '.' at the end of @"INC".

"DLSYM_NEEDS_UNDERSCORE"
    This symbol, if defined, indicates that we need to prepend an underscore to the symbol name before calling dlsym(). This only makes sense if you *have* dlsym, which we will presume is the case if you're using dl_dlopen.xs.

"Drand01"
    This macro is to be used to generate uniformly distributed random numbers over the range [0., 1.[. You may have to supply an 'extern double drand48();' in your program since SunOS 4.1.3 doesn't provide you with anything relevant in its headers. See "HAS_DRAND48_PROTO".

     double  Drand01()

"EBCDIC"
    This symbol, if defined, indicates that this system uses "EBCDIC" encoding.

"HAS_CSH"
    This symbol, if defined, indicates that the C-shell exists.

"HAS_GETHOSTNAME"
    This symbol, if defined, indicates that the C program may use the gethostname() routine to derive the host name. See also "HAS_UNAME" and "PHOSTNAME".

"HAS_GNULIBC"
    This symbol, if defined, indicates to the C program that the "GNU" C library is being used. A better check is to use the "__GLIBC__" and "__GLIBC_MINOR__" symbols supplied with glibc.

"HAS_LGAMMA"
    This symbol, if defined, indicates that the "lgamma" routine is available to do the log gamma function. See also "HAS_TGAMMA" and "HAS_LGAMMA_R".

"HAS_LGAMMA_R"
    This symbol, if defined, indicates that the "lgamma_r" routine is available to do the log gamma function without using the global signgam variable.

"HAS_NON_INT_BITFIELDS"
    This symbol, if defined, indicates that the C compiler accepts, without error or warning, "struct bitfields" that are declared with sizes other than plain 'int'; for example 'unsigned char' is accepted.

"HAS_PRCTL_SET_NAME"
    This symbol, if defined, indicates that the prctl routine is available to set process title and supports "PR_SET_NAME".

"HAS_PROCSELFEXE"
    This symbol is defined if "PROCSELFEXE_PATH" is a symlink to the absolute pathname of the executing program.

"HAS_PSEUDOFORK"
    This symbol, if defined, indicates that an emulation of the fork routine is available.

"HAS_REGCOMP"
    This symbol, if defined, indicates that the regcomp() routine is available to do some regular pattern matching (usually on "POSIX".2 conforming systems).

"HAS_SETPGID"
    This symbol, if defined, indicates that the "setpgid(pid, gpid)" routine is available to set process group ID.

"HAS_SIGSETJMP"
    This variable indicates to the C program that the sigsetjmp() routine is available to save the calling process's registers and stack environment for later use by siglongjmp(), and to optionally save the process's signal mask. See "Sigjmp_buf", "Sigsetjmp", and "Siglongjmp".

"HAS_STRUCT_CMSGHDR"
    This symbol, if defined, indicates that the "struct cmsghdr" is supported.

"HAS_STRUCT_MSGHDR"
    This symbol, if defined, indicates that the "struct msghdr" is supported.

"HAS_TGAMMA"
    This symbol, if defined, indicates that the "tgamma" routine is available to do the gamma function. See also "HAS_LGAMMA".

"HAS_UNAME"
    This symbol, if defined, indicates that the C program may use the uname() routine to derive the host name. See also "HAS_GETHOSTNAME" and "PHOSTNAME".

"HAS_UNION_SEMUN"
    This symbol, if defined, indicates that the "union semun" is defined by including sys/sem.h. If not, the user code probably needs to define it as:

     union semun {
     int val;
     struct semid_ds *buf;
     unsigned short *array;
     }

"I_DIRENT"
    This symbol, if defined, indicates to the C program that it should include dirent.h. Using this symbol also triggers the definition of the "Direntry_t" define which ends up being '"struct dirent"' or '"struct direct"' depending on the availability of dirent.h.

     #ifdef I_DIRENT
         #include <dirent.h>
     #endif

"I_POLL"
    This symbol, if defined, indicates that poll.h exists and should be included. (see also "HAS_POLL")

     #ifdef I_POLL
         #include <poll.h>
     #endif

"I_SYS_RESOURCE"
    This symbol, if defined, indicates to the C program that it should include sys/resource.h.

     #ifdef I_SYS_RESOURCE
         #include <sys_resource.h>
     #endif

"LIBM_LIB_VERSION"
    This symbol, if defined, indicates that libm exports "_LIB_VERSION" and that math.h defines the enum to manipulate it.

"NEED_VA_COPY"
    This symbol, if defined, indicates that the system stores the variable argument list datatype, "va_list", in a format that cannot be copied by simple assignment, so that some other means must be used when copying is required. As such systems vary in their provision (or non-provision) of copying mechanisms, handy.h defines a platform- independent macro, "Perl_va_copy(src, dst)", to do the job.

"OSNAME"
    This symbol contains the name of the operating system, as determined by Configure. You shouldn't rely on it too much; the specific feature tests from Configure are generally more reliable.

"OSVERS"
    This symbol contains the version of the operating system, as determined by Configure. You shouldn't rely on it too much; the specific feature tests from Configure are generally more reliable.

"PERL_USE_GCC_BRACE_GROUPS"
    This C pre-processor value, if defined, indicates that it is permissible to use the GCC brace groups extension. However, use of this extension is DISCOURAGED. Use a "static inline" function instead.

    The extension, of the form

     ({ statement ... })

    turns the block consisting of statement ... into an expression with a value, unlike plain C language blocks. This can present optimization possibilities, BUT, unless you know for sure that this will never be compiled without this extension being available and not forbidden, you need to specify an alternative. Thus two code paths have to be maintained, which can get out-of-sync. All these issues are solved by using a "static inline" function instead.

    Perl can be configured to not use this feature by passing the parameter "-Accflags=-DPERL_GCC_BRACE_GROUPS_FORBIDDEN" to Configure.

     #ifdef  PERL_USE_GCC_BRACE_GROUPS

"PHOSTNAME"
    This symbol, if defined, indicates the command to feed to the popen() routine to derive the host name. See also "HAS_GETHOSTNAME" and "HAS_UNAME". Note that the command uses a fully qualified path, so that it is safe even if used by a process with super-user privileges.

"PROCSELFEXE_PATH"
    If "HAS_PROCSELFEXE" is defined this symbol is the filename of the symbolic link pointing to the absolute pathname of the executing program.

"PTRSIZE"
    This symbol contains the size of a pointer, so that the C preprocessor can make decisions based on it. It will be "sizeof(void *)" if the compiler supports (void *); otherwise it will be "sizeof(char *)".

"RANDBITS"
    This symbol indicates how many bits are produced by the function used to generate normalized random numbers. Values include 15, 16, 31, and 48.

"seedDrand01"
    This symbol defines the macro to be used in seeding the random number generator (see "Drand01").

     void  seedDrand01(Rand_seed_t x)

"SELECT_MIN_BITS"
    This symbol holds the minimum number of bits operated by select. That is, if you do "select(n, ...)", how many bits at least will be cleared in the masks if some activity is detected. Usually this is either n or 32*ceil(n/32), especially many little-endians do the latter. This is only useful if you have select(), naturally.

"SETUID_SCRIPTS_ARE_SECURE_NOW"
    This symbol, if defined, indicates that the bug that prevents setuid scripts from being secure is not present in this kernel.

"ST_DEV_SIGN"
    This symbol holds the signedness of "struct stat"'s "st_dev". 1 for unsigned, -1 for signed.

"ST_DEV_SIZE"
    This variable contains the size of "struct stat"'s "st_dev" in bytes.

"STRINGIFY"
    This macro surrounds its token with double quotes.

     string  STRINGIFY(token x)

  List of capability "HAS_foo" symbols
This is a list of those symbols that dont appear elsewhere in ths document that indicate if the current platform has a certain capability. Their names all begin with "HAS_". Only those symbols whose capability is directly derived from the name are listed here. All others have their meaning expanded out elsewhere in this document. This (relatively) compact list is because we think that the expansion would add little or no value and take up a lot of space (because there are so many). If you think certain ones should be expanded, send email to perl5-porters@perl.org <mailto:perl5-porters@perl.org>.

Each symbol here will be "#define"d if and only if the platform has the capability. If you need more detail, see the corresponding entry in config.h. For convenience, the list is split so that the ones that indicate there is a reentrant version of a capability are listed separately

"HAS__FWALK", "HAS_ACCEPT4", "HAS_ACCESS", "HAS_ACCESSX", "HAS_ACOSH", "HAS_AINTL", "HAS_ALARM", "HAS_ASINH", "HAS_ATANH", "HAS_ATOLL", "HAS_CBRT", "HAS_CHOWN", "HAS_CHROOT", "HAS_CHSIZE", "HAS_CLEARENV", "HAS_COPYSIGN", "HAS_COPYSIGNL", "HAS_CRYPT", "HAS_CTERMID", "HAS_CUSERID", "HAS_DIRFD", "HAS_DLADDR", "HAS_DLERROR", "HAS_EACCESS", "HAS_ENDHOSTENT", "HAS_ENDNETENT", "HAS_ENDPROTOENT", "HAS_ENDSERVENT", "HAS_ERF", "HAS_ERFC", "HAS_EXPM1", "HAS_EXP2", "HAS_FCHMOD", "HAS_FCHMODAT", "HAS_FCHOWN", "HAS_FD_SET", "HAS_FDIM", "HAS_FEGETROUND", "HAS_FFS", "HAS_FFSL", "HAS_FGETPOS", "HAS_FLOCK", "HAS_FMA", "HAS_FMAX", "HAS_FMIN", "HAS_FORK", "HAS_FSEEKO", "HAS_FSETPOS", "HAS_FSYNC", "HAS_FTELLO", "HAS_GAI_STRERROR", "HAS_GETADDRINFO", "HAS_GETCWD", "HAS_GETESPWNAM", "HAS_GETGROUPS", "HAS_GETHOSTBYADDR", "HAS_GETHOSTBYNAME", "HAS_GETHOSTENT", "HAS_GETLOGIN", "HAS_GETNAMEINFO", "HAS_GETNETBYADDR", "HAS_GETNETBYNAME", "HAS_GETNETENT", "HAS_GETPAGESIZE", "HAS_GETPGID", "HAS_GETPGRP", "HAS_GETPGRP2", "HAS_GETPPID", "HAS_GETPRIORITY", "HAS_GETPROTOBYNAME", "HAS_GETPROTOBYNUMBER", "HAS_GETPROTOENT", "HAS_GETPRPWNAM", "HAS_GETSERVBYNAME", "HAS_GETSERVBYPORT", "HAS_GETSERVENT", "HAS_GETSPNAM", "HAS_HTONL", "HAS_HTONS", "HAS_HYPOT", "HAS_ILOGBL", "HAS_INET_ATON", "HAS_INETNTOP", "HAS_INETPTON", "HAS_IP_MREQ", "HAS_IP_MREQ_SOURCE", "HAS_IPV6_MREQ", "HAS_IPV6_MREQ_SOURCE", "HAS_ISASCII", "HAS_ISBLANK", "HAS_ISLESS", "HAS_KILLPG", "HAS_LCHOWN", "HAS_LINK", "HAS_LINKAT", "HAS_LLROUND", "HAS_LOCKF", "HAS_LOGB", "HAS_LOG1P", "HAS_LOG2", "HAS_LROUND", "HAS_LSTAT", "HAS_MADVISE", "HAS_MBLEN", "HAS_MBRLEN", "HAS_MBRTOWC", "HAS_MBSTOWCS", "HAS_MBTOWC", "HAS_MEMMEM", "HAS_MEMRCHR", "HAS_MKDTEMP", "HAS_MKFIFO", "HAS_MKOSTEMP", "HAS_MKSTEMP", "HAS_MKSTEMPS", "HAS_MMAP", "HAS_MPROTECT", "HAS_MSG", "HAS_MSYNC", "HAS_MUNMAP", "HAS_NEARBYINT", "HAS_NEXTAFTER", "HAS_NICE", "HAS_NTOHL", "HAS_NTOHS", "HAS_PATHCONF", "HAS_PAUSE", "HAS_PHOSTNAME", "HAS_PIPE", "HAS_PIPE2", "HAS_PRCTL", "HAS_PTRDIFF_T", "HAS_READLINK", "HAS_READV", "HAS_RECVMSG", "HAS_REMQUO", "HAS_RENAME", "HAS_RENAMEAT", "HAS_RINT", "HAS_ROUND", "HAS_SCALBNL", "HAS_SEM", "HAS_SENDMSG", "HAS_SETEGID", "HAS_SETENV", "HAS_SETEUID", "HAS_SETGROUPS", "HAS_SETHOSTENT", "HAS_SETLINEBUF", "HAS_SETNETENT", "HAS_SETPGRP", "HAS_SETPGRP2", "HAS_SETPRIORITY", "HAS_SETPROCTITLE", "HAS_SETPROTOENT", "HAS_SETREGID", "HAS_SETRESGID", "HAS_SETRESUID", "HAS_SETREUID", "HAS_SETRGID", "HAS_SETRUID", "HAS_SETSERVENT", "HAS_SETSID", "HAS_SHM", "HAS_SIGACTION", "HAS_SIGPROCMASK", "HAS_SIN6_SCOPE_ID", "HAS_SNPRINTF", "HAS_STAT", "HAS_STRCOLL", "HAS_STRERROR_L", "HAS_STRLCAT", "HAS_STRLCPY", "HAS_STRNLEN", "HAS_STRTOD", "HAS_STRTOL", "HAS_STRTOLL", "HAS_STRTOQ", "HAS_STRTOUL", "HAS_STRTOULL", "HAS_STRTOUQ", "HAS_STRXFRM", "HAS_STRXFRM_L", "HAS_SYMLINK", "HAS_SYS_ERRLIST", "HAS_SYSCALL", "HAS_SYSCONF", "HAS_SYSTEM", "HAS_TCGETPGRP", "HAS_TCSETPGRP", "HAS_TOWLOWER", "HAS_TOWUPPER", "HAS_TRUNCATE", "HAS_TRUNCL", "HAS_UALARM", "HAS_UMASK", "HAS_UNLINKAT", "HAS_UNSETENV", "HAS_VFORK", "HAS_VSNPRINTF", "HAS_WAITPID", "HAS_WAIT4", "HAS_WCRTOMB", "HAS_WCSCMP", "HAS_WCSTOMBS", "HAS_WCSXFRM", "HAS_WCTOMB", "HAS_WRITEV"

And, the reentrant capabilities:

"HAS_CRYPT_R", "HAS_CTERMID_R", "HAS_DRAND48_R", "HAS_ENDHOSTENT_R", "HAS_ENDNETENT_R", "HAS_ENDPROTOENT_R", "HAS_ENDSERVENT_R", "HAS_GETGRGID_R", "HAS_GETGRNAM_R", "HAS_GETHOSTBYADDR_R", "HAS_GETHOSTBYNAME_R", "HAS_GETHOSTENT_R", "HAS_GETLOGIN_R", "HAS_GETNETBYADDR_R", "HAS_GETNETBYNAME_R", "HAS_GETNETENT_R", "HAS_GETPROTOBYNAME_R", "HAS_GETPROTOBYNUMBER_R", "HAS_GETPROTOENT_R", "HAS_GETPWNAM_R", "HAS_GETPWUID_R", "HAS_GETSERVBYNAME_R", "HAS_GETSERVBYPORT_R", "HAS_GETSERVENT_R", "HAS_GETSPNAM_R", "HAS_RANDOM_R", "HAS_READDIR_R", "HAS_SETHOSTENT_R", "HAS_SETNETENT_R", "HAS_SETPROTOENT_R", "HAS_SETSERVENT_R", "HAS_SRANDOM_R", "HAS_SRAND48_R", "HAS_STRERROR_R", "HAS_TMPNAM_R", "HAS_TTYNAME_R"

Example usage:

 #ifdef HAS_STRNLEN
   use strnlen()
 #else
   use an alternative implementation
 #endif

  List of "#include" needed symbols
This list contains symbols that indicate if certain "#include" files are present on the platform. If your code accesses the functionality that one of these is for, you will need to "#include" it if the symbol on this list is "#define"d. For more detail, see the corresponding entry in config.h.

"I_ARPA_INET", "I_BFD", "I_CRYPT", "I_DBM", "I_DLFCN", "I_EXECINFO", "I_FP", "I_FP_CLASS", "I_GDBM", "I_GDBM_NDBM", "I_GDBMNDBM", "I_GRP", "I_IEEEFP", "I_INTTYPES", "I_LIBUTIL", "I_MNTENT", "I_NDBM", "I_NET_ERRNO", "I_NETDB", "I_NETINET_IN", "I_NETINET_TCP", "I_PROT", "I_PWD", "I_RPCSVC_DBM", "I_SGTTY", "I_SHADOW", "I_STDBOOL", "I_STDINT", "I_SUNMATH", "I_SYS_ACCESS", "I_SYS_IOCTL", "I_SYS_MOUNT", "I_SYS_PARAM", "I_SYS_POLL", "I_SYS_SECURITY", "I_SYS_SELECT", "I_SYS_STAT", "I_SYS_STATVFS", "I_SYS_SYSCALL", "I_SYS_TIME", "I_SYS_TIME_KERNEL", "I_SYS_TIMES", "I_SYS_TYPES", "I_SYS_UN", "I_SYS_VFS", "I_SYS_WAIT", "I_SYSLOG", "I_SYSMODE", "I_SYSUIO", "I_SYSUTSNAME", "I_TERMIO", "I_TERMIOS", "I_UNISTD", "I_USTAT", "I_VFORK", "I_WCHAR", "I_WCTYPE"

Example usage:

 #ifdef I_WCHAR
   #include <wchar.h>
 #endif

Global Variables
These variables are global to an entire process. They are shared between all interpreters and all threads in a process. Any variables not documented here may be changed or removed without notice, so don't use them! If you feel you really do need to use an unlisted variable, first send email to perl5-porters@perl.org <mailto:perl5-porters@perl.org>. It may be that someone there will point out a way to accomplish what you need without using an internal variable. But if not, you should get a go-ahead to document and then use the variable.

"PL_check"
    Array, indexed by opcode, of functions that will be called for the "check" phase of optree building during compilation of Perl code. For most (but not all) types of op, once the op has been initially built and populated with child ops it will be filtered through the check function referenced by the appropriate element of this array. The new op is passed in as the sole argument to the check function, and the check function returns the completed op. The check function may (as the name suggests) check the op for validity and signal errors. It may also initialise or modify parts of the ops, or perform more radical surgery such as adding or removing child ops, or even throw the op away and return a different op in its place.

    This array of function pointers is a convenient place to hook into the compilation process. An XS module can put its own custom check function in place of any of the standard ones, to influence the compilation of a particular type of op. However, a custom check function must never fully replace a standard check function (or even a custom check function from another module). A module modifying checking must instead wrap the preexisting check function. A custom check function must be selective about when to apply its custom behaviour. In the usual case where it decides not to do anything special with an op, it must chain the preexisting op function. Check functions are thus linked in a chain, with the core's base checker at the end.

    For thread safety, modules should not write directly to this array. Instead, use the function "wrap_op_checker".

"PL_infix_plugin"
    NOTE: "PL_infix_plugin" is experimental and may change or be removed without notice.

    NOTE: This API exists entirely for the purpose of making the CPAN module "XS::Parse::Infix" work. It is not expected that additional modules will make use of it; rather, that they should use "XS::Parse::Infix" to provide parsing of new infix operators.

    Function pointer, pointing at a function used to handle extended infix operators. The function should be declared as

            int infix_plugin_function(pTHX_
                    char *opname, STRLEN oplen,
                    struct Perl_custom_infix **infix_ptr)

    The function is called from the tokenizer whenever a possible infix operator is seen. "opname" points to the operator name in the parser's input buffer, and "oplen" gives the maximum number of bytes of it that should be consumed; it is not null-terminated. The function is expected to examine the operator name and possibly other state such as %^H, to determine whether it wants to handle the operator name.

    As compared to the single stage of "PL_keyword_plugin", parsing of additional infix operators occurs in three separate stages. This is because of the more complex interactions it has with the parser, to ensure that operator precedence rules work correctly. These stages are co-ordinated by the use of an additional information structure.

    If the function wants to handle the infix operator, it must set the variable pointed to by "infix_ptr" to the address of a structure that provides this additional information about the subsequent parsing stages. If it does not, it should make a call to the next function in the chain.

    This structure has the following definition:

            struct Perl_custom_infix {
                enum Perl_custom_infix_precedence prec;
                void (*parse)(pTHX_ SV **opdata,
                    struct Perl_custom_infix *);
                OP *(*build_op)(pTHX_ SV **opdata, OP *lhs, OP *rhs,
                    struct Perl_custom_infix *);
            };

    The function must then return an integer giving the number of bytes consumed by the name of this operator. In the case of an operator whose name is composed of identifier characters, this must be equal to "oplen". In the case of an operator named by non-identifier characters, this is permitted to be shorter than "oplen", and any additional characters after it will not be claimed by the infix operator but instead will be consumed by the tokenizer and parser as normal.

    If the optional "parse" function is provided, it is called immediately by the parser to let the operator's definition consume any additional syntax from the source code. This should not be used for normal operand parsing, but it may be useful when implementing things like parametric operators or meta-operators that consume more syntax themselves. This function may use the variable pointed to by "opdata" to provide an SV containing additional data to be passed into the "build_op" function later on.

    The information structure gives the operator precedence level in the "prec" field. This is used to tell the parser how much of the surrounding syntax before and after should be considered as operands to the operator.

    The tokenizer and parser will then continue to operate as normal until enough additional input has been parsed to form both the left- and right-hand side operands to the operator, according to the precedence level. At this point the "build_op" function is called, being passed the left- and right-hand operands as optree fragments. It is expected to combine them into the resulting optree fragment, which it should return.

    After the "build_op" function has returned, if the variable pointed to by "opdata" was set to a non-"NULL" value, it will then be destroyed by calling SvREFCNT_dec().

    For thread safety, modules should not set this variable directly. Instead, use the function "wrap_infix_plugin".

    However, that all said, the introductory note above still applies. This variable is provided in core perl only for the benefit of the "XS::Parse::Infix" module. That module acts as a central registry for infix operators, automatically handling things like deparse support and discovery/reflection, and these abilities only work because it knows all the registered operators. Other modules should not use this interpreter variable directly to implement them because then those central features would no longer work properly.

    Furthermore, it is likely that this (experimental) API will be replaced in a future Perl version by a more complete API that fully implements the central registry and other semantics currently provided by "XS::Parse::Infix", once the module has had sufficient experimental testing time. This current mechanism exists only as an interim measure to get to that stage.

"PL_keyword_plugin"
    NOTE: "PL_keyword_plugin" is experimental and may change or be removed without notice.

    Function pointer, pointing at a function used to handle extended keywords. The function should be declared as

            int keyword_plugin_function(pTHX_
                    char *keyword_ptr, STRLEN keyword_len,
                    OP **op_ptr)

    The function is called from the tokeniser, whenever a possible keyword is seen. "keyword_ptr" points at the word in the parser's input buffer, and "keyword_len" gives its length; it is not null-terminated. The function is expected to examine the word, and possibly other state such as %^H, to decide whether it wants to handle it as an extended keyword. If it does not, the function should return "KEYWORD_PLUGIN_DECLINE", and the normal parser process will continue.

    If the function wants to handle the keyword, it first must parse anything following the keyword that is part of the syntax introduced by the keyword. See "Lexer interface" for details.

    When a keyword is being handled, the plugin function must build a tree of "OP" structures, representing the code that was parsed. The root of the tree must be stored in *op_ptr. The function then returns a constant indicating the syntactic role of the construct that it has parsed: "KEYWORD_PLUGIN_STMT" if it is a complete statement, or "KEYWORD_PLUGIN_EXPR" if it is an expression. Note that a statement construct cannot be used inside an expression (except via "do BLOCK" and similar), and an expression is not a complete statement (it requires at least a terminating semicolon).

    When a keyword is handled, the plugin function may also have (compile-time) side effects. It may modify "%^H", define functions, and so on. Typically, if side effects are the main purpose of a handler, it does not wish to generate any ops to be included in the normal compilation. In this case it is still required to supply an op tree, but it suffices to generate a single null op.

    That's how the *PL_keyword_plugin function needs to behave overall. Conventionally, however, one does not completely replace the existing handler function. Instead, take a copy of "PL_keyword_plugin" before assigning your own function pointer to it. Your handler function should look for keywords that it is interested in and handle those. Where it is not interested, it should call the saved plugin function, passing on the arguments it received. Thus "PL_keyword_plugin" actually points at a chain of handler functions, all of which have an opportunity to handle keywords, and only the last function in the chain (built into the Perl core) will normally return "KEYWORD_PLUGIN_DECLINE".

    For thread safety, modules should not set this variable directly. Instead, use the function "wrap_keyword_plugin".

"PL_phase"
    A value that indicates the current Perl interpreter's phase. Possible values include "PERL_PHASE_CONSTRUCT", "PERL_PHASE_START", "PERL_PHASE_CHECK", "PERL_PHASE_INIT", "PERL_PHASE_RUN", "PERL_PHASE_END", and "PERL_PHASE_DESTRUCT".

    For example, the following determines whether the interpreter is in global destruction:

        if (PL_phase == PERL_PHASE_DESTRUCT) {
            // we are in global destruction
        }

    "PL_phase" was introduced in Perl 5.14; in prior perls you can use "PL_dirty" (boolean) to determine whether the interpreter is in global destruction. (Use of "PL_dirty" is discouraged since 5.14.)

     enum perl_phase  PL_phase

GV Handling and Stashes
A GV is a structure which corresponds to a Perl typeglob, i.e., *foo. It is a structure that holds a pointer to a scalar, an array, a hash etc, corresponding to $foo, @foo, %foo.

GVs are usually found as values in stashes (symbol table hashes) where Perl stores its global variables.

A stash is a hash that contains all variables that are defined within a package. See "Stashes and Globs" in perlguts

"amagic_call"
    Perform the overloaded (active magic) operation given by "method". "method" is one of the values found in overload.h.

    "flags" affects how the operation is performed, as follows:

    "AMGf_noleft"
        "left" is not to be used in this operation.

    "AMGf_noright"
        "right" is not to be used in this operation.

    "AMGf_unary"
        The operation is done only on just one operand.

    "AMGf_assign"
        The operation changes one of the operands, e.g., $x += 1

     SV *       amagic_call(      SV *left, SV *right, int method,
                                  int dir)
     SV *  Perl_amagic_call(pTHX_ SV *left, SV *right, int method,
                                  int dir)

"amagic_deref_call"
    Perform "method" overloading dereferencing on "ref", returning the dereferenced result. "method" must be one of the dereference operations given in overload.h.

    If overloading is inactive on "ref", returns "ref" itself.

     SV *       amagic_deref_call(      SV *ref, int method)
     SV *  Perl_amagic_deref_call(pTHX_ SV *ref, int method)

"gv_add_by_type"
    Make sure there is a slot of type "type" in the GV "gv".

     GV *       gv_add_by_type(      GV *gv, svtype type)
     GV *  Perl_gv_add_by_type(pTHX_ GV *gv, svtype type)

"Gv_AMupdate"
    Recalculates overload magic in the package given by "stash".

    Returns:

    1 on success and there is some overload
    0 if there is no overload
    -1 if some error occurred and it couldn't croak (because "destructing" is true).

     int       Gv_AMupdate(      HV *stash, bool destructing)
     int  Perl_Gv_AMupdate(pTHX_ HV *stash, bool destructing)

"gv_autoload_pv"
"gv_autoload_pvn"
"gv_autoload_sv"
"gv_autoload4"
    These each search for an "AUTOLOAD" method, returning NULL if not found, or else returning a pointer to its GV, while setting the package $AUTOLOAD variable to the name (fully qualified). Also, if found and the GV's CV is an XSUB, the CV's PV will be set to the name, and its stash will be set to the stash of the GV.

    Searching is done in "MRO" order, as specified in ""gv_fetchmeth"", beginning with "stash" if it isn't NULL.

    "gv_autoload4") has a "method" parameter; the others a "flags" one (both types explained below). Otherwise, the forms differ only in how the name is specified.

    In "gv_autoload_pv", "namepv" is a C language NUL-terminated string.

    In "gv_autoload_pvn" and "gv_autoload4"), "name" points to the first byte of the name, and an additional parameter, "len", specifies its length in bytes. Hence, *name may contain embedded-NUL characters.

    In "gv_autoload_sv", *namesv is an SV, and the name is the PV extracted from that using ""SvPV"". If the SV is marked as being in UTF-8, the extracted PV will also be.

    The other way to indicate that the name is encoded as UTF-8 is to set the "SVf_UTF8" bit in "flags" for the forms that have that parameter. The name is never considered to be UTF-8 in "gv_autoload4".

    The "method" parameter in "gv_autoload4" is used only to indicate that the name is for a method (non-zero), or not (zero). The other forms use the "GV_AUTOLOAD_ISMETHOD" bit in "flags" to indicate this.

    The only other significant value in "flags" currently is "GV_SUPER" to indicate, if set, to skip searching for the name in "stash".

     GV *       gv_autoload_pv (      NOCHECK HV *stash,
                                      const char *namepv, U32 flags)
     GV *  Perl_gv_autoload_pv (pTHX_ NOCHECK HV *stash,
                                      const char *namepv, U32 flags)
     GV *       gv_autoload_pvn(      NOCHECK HV *stash,
                                      const char *name, STRLEN len,
                                      U32 flags)
     GV *  Perl_gv_autoload_pvn(pTHX_ NOCHECK HV *stash,
                                      const char *name, STRLEN len,
                                      U32 flags)
     GV *       gv_autoload_sv (      NOCHECK HV *stash, SV *namesv,
                                      U32 flags)
     GV *  Perl_gv_autoload_sv (pTHX_ NOCHECK HV *stash, SV *namesv,
                                      U32 flags)
     GV *       gv_autoload4   (      HV *stash, const char *name,
                                      STRLEN len, I32 method
    )

"gv_AVadd"
"gv_HVadd"
"gv_IOadd"
"gv_SVadd"
    Make sure there is a slot of the given type (AV, HV, IO, SV) in the GV "gv".

     GV *       gv_AVadd(      GV *gv)
     GV *  Perl_gv_AVadd(pTHX_ GV *gv)
     GV *       gv_HVadd(      GV *gv)
     GV *  Perl_gv_HVadd(pTHX_ GV *gv)
     GV *       gv_IOadd(      GV *gv)
     GV *  Perl_gv_IOadd(pTHX_ GV *gv)
     GV *       gv_SVadd(      GV *gv)
     GV *  Perl_gv_SVadd(pTHX_ GV *gv)

"gv_const_sv"
    If "gv" is a typeglob whose subroutine entry is a constant sub eligible for inlining, or "gv" is a placeholder reference that would be promoted to such a typeglob, then returns the value returned by the sub. Otherwise, returns "NULL".

     SV *       gv_const_sv(      GV *gv)
     SV *  Perl_gv_const_sv(pTHX_ GV *gv)

"gv_efullname3"
"gv_efullname4"
"gv_fullname3"
"gv_fullname4"
    Place the full package name of "gv" into "sv". The "gv_e*" forms return instead the effective package name (see "HvENAME").

    If "prefix" is non-NULL, it is considered to be a C language NUL-terminated string, and the stored name will be prefaced with it.

    The other difference between the functions is that the *4 forms have an extra parameter, "keepmain". If "true" an initial "main::" in the name is kept; if "false" it is stripped. With the *3 forms, it is always kept.

     void       gv_efullname3(      SV *sv, const GV *gv,
                                    const char *prefix)
     void  Perl_gv_efullname3(pTHX_ SV *sv, const GV *gv,
                                    const char *prefix)
     void       gv_efullname4(      SV *sv, const GV *gv,
                                    const char *prefix, bool keepmain)
     void  Perl_gv_efullname4(pTHX_ SV *sv, const GV *gv,
                                    const char *prefix, bool keepmain)
     void       gv_fullname3 (      SV *sv, const GV *gv,
                                    const char *prefix)
     void  Perl_gv_fullname3 (pTHX_ SV *sv, const GV *gv,
                                    const char *prefix)
     void       gv_fullname4 (      SV *sv, const GV *gv,
                                    const char *prefix, bool keepmain)
     void  Perl_gv_fullname4 (pTHX_ SV *sv, const GV *gv,
                                    const char *prefix, bool keepmain)

"gv_fetchfile"
"gv_fetchfile_flags"
    These return the debugger glob for the file (compiled by Perl) whose name is given by the "name" parameter.

    There are currently exactly two differences between these functions.

    The "name" parameter to "gv_fetchfile" is a C string, meaning it is "NUL"-terminated; whereas the "name" parameter to "gv_fetchfile_flags" is a Perl string, whose length (in bytes) is passed in via the "namelen" parameter This means the name may contain embedded "NUL" characters. "namelen" doesn't exist in plain "gv_fetchfile").

    The other difference is that "gv_fetchfile_flags" has an extra "flags" parameter, which is currently completely ignored, but allows for possible future extensions.

     GV *       gv_fetchfile      (      const char *name)
     GV *  Perl_gv_fetchfile      (pTHX_ const char *name)
     GV *       gv_fetchfile_flags(      const char * const name,
                                         const STRLEN len,
                                         const U32 flags)
     GV *  Perl_gv_fetchfile_flags(pTHX_ const char * const name,
                                         const STRLEN len,
                                         const U32 flags)

"gv_fetchmeth"
"gv_fetchmeth_autoload"
"gv_fetchmeth_pv"
"gv_fetchmeth_pv_autoload"
"gv_fetchmeth_pvn"
"gv_fetchmeth_pvn_autoload"
"gv_fetchmeth_sv"
"gv_fetchmeth_sv_autoload"
    These each look for a glob with name "name", containing a defined subroutine, returning the GV of that glob if found, or "NULL" if not.

    You probably want to use the "gv_fetchmethod" family of functions instead.

    Searching is always done in the following order, with some steps skipped depending on various criteria. The first match found is used, ending the search. "gv_fetchmeth_pv" and "gv_fetchmeth_pv_autoload" lack a flags parameter, so in the following, consider "flags" to be zero for those two functions.

    1.  "stash" is searched first, unless "stash" either is NULL or "GV_SUPER" is set in "flags".

    2.  Stashes accessible via @ISA are searched next.

        Searching is conducted according to "MRO" order.

    3.  "UNIVERSAL::" is searched unless "GV_NOUNIVERSAL" is set.

    4.  Autoloaded subroutines are then looked for, but only for the forms whose names end in "_autoload", and when "stash" is not NULL and "GV_SUPER" is not set.

    The argument "level" should be either 0 or -1.

    If -1
        No method caching is done.

    If 0
        If "GV_SUPER" is not set in "flags", the method found is cached in "stash".

        If "GV_SUPER" is set in "flags", the method is cached in the super cache for "stash".

        If the method is not found a negative cache entry is added.

        Note that subroutines found in "UNIVERSAL::" are not cached, though this may change.

    The GV returned from these may be a method cache entry, which is not visible to Perl code. So when calling "call_sv", you should not use the GV directly; instead, you should use the method's CV, which can be obtained from the GV with the "GvCV" macro. For an autoloaded subroutine without a stub, GvCV() of the result may be zero.

    The only other significant value for "flags" is "SVf_UTF8", indicating that "name" is to be treated as being encoded in UTF-8. Since plain "gv_fetchmeth" and "gv_fetchmeth_autoload" lack a "flags" parameter, "name" is never UTF-8.

    Otherwise, the functions behave identically, except as noted below.

    In "gv_fetchmeth_pv" and "gv_fetchmeth_pv_autoload", "name" is a C language NUL-terminated string.

    In "gv_fetchmeth", "gv_fetchmeth_pvn", "gv_fetchmeth_autoload", and "gv_fetchmeth_pvn_autoload", "name" points to the first byte of the name, and an additional parameter, "len", specifies its length in bytes. Hence, the name may contain embedded-NUL characters.

    In "gv_fetchmeth_sv" and "gv_fetchmeth_sv_autoload", *name is an SV, and the name is the PV extracted from that, using "SvPV". If the SV is marked as being in UTF-8, the extracted PV will also be. Including "SVf_UTF8" in "flags" will force the name to be considered to be UTF-8 even if the SV is not so marked.

     GV *       gv_fetchmeth             (      NOCHECK HV *stash,
                                                const char *name,
                                                STRLEN len, I32 level)
     GV *       gv_fetchmeth_autoload    (      NOCHECK HV *stash,
                                                const char *name,
                                                STRLEN len, I32 level)
     GV *       gv_fetchmeth_pv          (      NOCHECK HV *stash,
                                                const char *name,
                                                I32 level, U32 flags)
     GV *  Perl_gv_fetchmeth_pv          (pTHX_ NOCHECK HV *stash,
                                                const char *name,
                                                I32 level, U32 flags)
     GV *       gv_fetchmeth_pv_autoload (      NOCHECK HV *stash,
                                                const char *name,
                                                I32 level, U32 flags)
     GV *  Perl_gv_fetchmeth_pv_autoload (pTHX_ NOCHECK HV *stash,
                                                const char *name,
                                                I32 level, U32 flags)
     GV *       gv_fetchmeth_pvn         (      NOCHECK HV *stash,
                                                const char *name,
                                                STRLEN len, I32 level,
                                                U32 flags)
     GV *  Perl_gv_fetchmeth_pvn         (pTHX_ NOCHECK HV *stash,
                                                const char *name,
                                                STRLEN len, I32 level,
                                                U32 flags)
     GV *       gv_fetchmeth_pvn_autoload(      NOCHECK HV *stash,
                                                const char *name,
                                                STRLEN len, I32 level,
                                                U32 flags)
     GV *  Perl_gv_fetchmeth_pvn_autoload(pTHX_ NOCHECK HV *stash,
                                                const char *name,
                                                STRLEN len, I32 level,
                                                U32 flags)
     GV *       gv_fetchmeth_sv          (      NOCHECK HV *stash,
                                                SV *namesv, I32 level,
                                                U32 flags)
     GV *  Perl_gv_fetchmeth_sv          (pTHX_ NOCHECK HV *stash,
                                                SV *namesv, I32 level,
                                                U32 flags)
     GV *       gv_fetchmeth_sv_autoload (      NOCHECK HV *stash,
                                                SV *namesv, I32 level,
                                                U32 flags)
     GV *  Perl_gv_fetchmeth_sv_autoload (pTHX_ NOCHECK HV *stash,
                                                SV *namesv, I32 level,
                                                U32 flags)

"gv_fetchmethod"
"gv_fetchmethod_autoload"
    These each return the glob which contains the subroutine to call to invoke the method on the "stash". In fact in the presence of autoloading this may be the glob for "AUTOLOAD". In this case the corresponding variable $AUTOLOAD is already setup.

    The third parameter of "gv_fetchmethod_autoload" determines whether AUTOLOAD lookup is performed if the given method is not present: non-zero means yes, look for AUTOLOAD; zero means no, don't look for AUTOLOAD. Calling "gv_fetchmethod" is equivalent to calling "gv_fetchmethod_autoload" with a non-zero "autoload" parameter.

    These functions grant "SUPER" token as a prefix of the method name. Note that if you want to keep the returned glob for a long time, you need to check for it being "AUTOLOAD", since at the later time the call may load a different subroutine due to $AUTOLOAD changing its value. Use the glob created as a side effect to do this.

    These functions have the same side-effects as "gv_fetchmeth" with "level==0". The warning against passing the GV returned by "gv_fetchmeth" to "call_sv" applies equally to these functions.

     GV *       gv_fetchmethod         (      NOCHECK HV *stash,
                                              const char *name)
     GV *  Perl_gv_fetchmethod         (pTHX_ NOCHECK HV *stash,
                                              const char *name)
     GV *       gv_fetchmethod_autoload(      NOCHECK HV *stash,
                                              const char *name,
                                              I32 autoload)
     GV *  Perl_gv_fetchmethod_autoload(pTHX_ NOCHECK HV *stash,
                                              const char *name,
                                              I32 autoload)

"gv_fetchpv"
"gv_fetchpvn"
"gv_fetchpvn_flags"
"gv_fetchpvs"
"gv_fetchsv"
"gv_fetchsv_nomg"
    These all return the GV of type "sv_type" whose name is given by the inputs, or NULL if no GV of that name and type could be found. See "Stashes and Globs" in perlguts.

    The only differences are how the input name is specified, and if 'get' magic is normally used in getting that name.

    Don't be fooled by the fact that only one form has "flags" in its name. They all have a "flags" parameter in fact, and all the flag bits have the same meanings for all

    If any of the flags "GV_ADD", "GV_ADDMG", "GV_ADDWARN", "GV_ADDMULTI", or "GV_NOINIT" is set, a GV is created if none already exists for the input name and type. However, "GV_ADDMG" will only do the creation for magical GV's. For all of these flags except "GV_NOINIT", "gv_init_pvn" is called after the addition. "GV_ADDWARN" is used when the caller expects that adding won't be necessary because the symbol should already exist; but if not, add it anyway, with a warning that it was unexpectedly absent. The "GV_ADDMULTI" flag means to pretend that the GV has been seen before (i.e., suppress "Used once" warnings).

    The flag "GV_NOADD_NOINIT" causes "gv_init_pvn" not be to called if the GV existed but isn't PVGV.

    If the "SVf_UTF8" bit is set, the name is treated as being encoded in UTF-8; otherwise the name won't be considered to be UTF-8 in the "pv"-named forms, and the UTF-8ness of the underlying SVs will be used in the "sv" forms.

    If the flag "GV_NOTQUAL" is set, the caller warrants that the input name is a plain symbol name, not qualified with a package, otherwise the name is checked for being a qualified one.

    In "gv_fetchpv", "nambeg" is a C string, NUL-terminated with no intermediate NULs.

    In "gv_fetchpvs", "name" is a literal C string, hence is enclosed in double quotes.

    "gv_fetchpvn" and "gv_fetchpvn_flags" are identical. In these, <nambeg> is a Perl string whose byte length is given by "full_len", and may contain embedded NULs.

    In "gv_fetchsv" and "gv_fetchsv_nomg", the name is extracted from the PV of the input "name" SV. The only difference between these two forms is that 'get' magic is normally done on "name" in "gv_fetchsv", and always skipped with "gv_fetchsv_nomg". Including "GV_NO_SVGMAGIC" in the "flags" parameter to "gv_fetchsv" makes it behave identically to "gv_fetchsv_nomg".

     GV *       gv_fetchpv       (      const char *nambeg, I32 flags,
                                        const svtype sv_type)
     GV *  Perl_gv_fetchpv       (pTHX_ const char *nambeg, I32 flags,
                                        const svtype sv_type)
     GV *       gv_fetchpvn      (      const char * nambeg,
                                        STRLEN full_len, I32 flags,
                                        const svtype sv_type)
     GV *       gv_fetchpvn_flags(      const char *name, STRLEN len,
                                        I32 flags,
                                        const svtype sv_type)
     GV *  Perl_gv_fetchpvn_flags(pTHX_ const char *name, STRLEN len,
                                        I32 flags,
                                        const svtype sv_type)
     GV *       gv_fetchpvs      (      "name", I32 flags,
                                        const svtype sv_type)
     GV *       gv_fetchsv       (      SV *name, I32 flags,
                                        const svtype sv_type)
     GV *  Perl_gv_fetchsv       (pTHX_ SV *name, I32 flags,
                                        const svtype sv_type)
     GV *       gv_fetchsv_nomg  (      SV *name, I32 flags,
                                        const svtype sv_type)

"gv_fullname3*"
"gv_fullname4*"
    Described under "gv_efullname3"

"gv_HVadd*"
    Described under "gv_AVadd"

"gv_init"
"gv_init_pv"
"gv_init_pvn"
"gv_init_sv"
    These each convert a scalar into a typeglob. This is an incoercible typeglob; assigning a reference to it will assign to one of its slots, instead of overwriting it as happens with typeglobs created by "SvSetSV". Converting any scalar that is SvOK() may produce unpredictable results and is reserved for perl's internal use.

    "gv" is the scalar to be converted.

    "stash" is the parent stash/package, if any.

    In "gv_init" and "gv_init_pvn", "name" and "len" give the name. The name must be unqualified; that is, it must not include the package name. If "gv" is a stash element, it is the caller's responsibility to ensure that the name passed to this function matches the name of the element. If it does not match, perl's internal bookkeeping will get out of sync. "name" may contain embedded NUL characters.

    "gv_init_pv" is identical to "gv_init_pvn", but takes a NUL-terminated string for the name instead of separate char * and length parameters.

    In "gv_init_sv", the name is given by "sv".

    All but "gv_init" take a "flags" parameter. Set "flags" to include "SVf_UTF8" if "name" is a UTF-8 string. In "gv_init_sv", if SvUTF8(sv) is non-zero, name will be also be considered to be a UTF-8 string. It's unlikely to be a good idea to pass this particular flag to "gv_init_sv", as that would potentially override the (presumaby known) state of "sv".

    "flags" can also take the "GV_ADDMULTI" flag, which means to pretend that the GV has been seen before (i.e., suppress "Used once" warnings).

    "gv_init" is the old form of "gv_init_pvn". It does not work with UTF-8 strings, as it has no flags parameter. Setting the "multi" parameter to non-zero has the same effect as setting the "GV_ADDMULTI" flag in the other forms.

     void       gv_init    (      GV *gv, HV *stash, const char *name,
                                  STRLEN len, int multi)
     void       gv_init_pv (      GV *gv, HV *stash, const char *name,
                                  U32 flags)
     void  Perl_gv_init_pv (pTHX_ GV *gv, HV *stash, const char *name,
                                  U32 flags)
     void       gv_init_pvn(      GV *gv, HV *stash, const char *name,
                                  STRLEN len, U32 flags)
     void  Perl_gv_init_pvn(pTHX_ GV *gv, HV *stash, const char *name,
                                  STRLEN len, U32 flags)
     void       gv_init_sv (      GV *gv, HV *stash, SV *namesv,
                                  U32 flags)
     void  Perl_gv_init_sv (pTHX_ GV *gv, HV *stash, SV *namesv,
                                  U32 flags)

"gv_IOadd*"
    Described under "gv_AVadd"

"gv_name_set"
    Set the name for GV "gv" to "name" which is "len" bytes long. Thus it may contain embedded NUL characters.

    If "flags" contains "SVf_UTF8", the name is treated as being encoded in UTF-8; otherwise not.

     void       gv_name_set(      GV *gv, const char *name, U32 len,
                                  U32 flags)
     void  Perl_gv_name_set(pTHX_ GV *gv, const char *name, U32 len,
                                  U32 flags)

"gv_stashpv"
"gv_stashpvn"
"gv_stashpvs"
"gv_stashsv"
    Note "gv_stashsv" is strongly preferred for performance reasons.

    These each return a pointer to the stash for a specified package.

    In "gv_stashsv", the package is specified by "sv".

    In "gv_stashpvs", the package is specified by the literal C string enclosed in double quotes.

    In the other forms, "name" specifies the package. In "gv_stashpvn", "namelen" gives the length of the name in bytes, so it may include embedded NUL characters. In "gv_stashpv", "name" ends at the first NUL character.

    "flags" is passed to gv_fetchpvn_flags(), so if set to "GV_ADD" then the package will be created if it does not already exist. If the package does not exist and "flags" is 0 (or any other setting that does not create packages) then "NULL" is returned.

    Flags may be one of:

     GV_ADD           Create and initialize the package if doesn't
                      already exist
     GV_NOADD_NOINIT  Don't create the package,
     GV_ADDMG         GV_ADD iff the GV is magical
     GV_NOINIT        GV_ADD, but don't initialize
     GV_NOEXPAND      Don't expand SvOK() entries to PVGV
     SVf_UTF8         The name is in UTF-8

    The most important of which are probably "GV_ADD" and "SVf_UTF8".

     HV *       gv_stashpv (      const char *name, I32 flags)
     HV *  Perl_gv_stashpv (pTHX_ const char *name, I32 flags)
     HV *       gv_stashpvn(      const char *name, U32 namelen,
                                  I32 flags)
     HV *  Perl_gv_stashpvn(pTHX_ const char *name, U32 namelen,
                                  I32 flags)
     HV*        gv_stashpvs(      "name", I32 create)
     HV *       gv_stashsv (      SV *sv, I32 flags)
     HV *  Perl_gv_stashsv (pTHX_ SV *sv, I32 flags)

"gv_SVadd*"
    Described under "gv_AVadd"

"GvAV"
    Return the AV from the GV.

     AV*  GvAV(GV* gv)

"GvCV"
    Return the CV from the GV.

     CV*  GvCV(GV* gv)

"GvHV"
    Return the HV from the GV.

     HV*  GvHV(GV* gv)

"GvREFCNT_inc"
"GvREFCNT_inc_simple"
"GvREFCNT_inc_simple_NN"
    These all increment the reference count of the given SV, which must be a GV. They are useful when assigning the result into a typed pointer as they avoid the need to cast the result to the appropriate type.

     GV *  GvREFCNT_inc          (GV *gv)
     GV *  GvREFCNT_inc_simple   (GV *gv)
     GV *  GvREFCNT_inc_simple_NN(GV *gv)

"GvSV"
    Return the SV from the GV.

    Prior to Perl v5.9.3, this would add a scalar if none existed. Nowadays, use "GvSVn" for that, or compile perl with "-DPERL_CREATE_GVSV". See perl5100delta.

     SV*  GvSV(GV* gv)

"GvSVn"
    Like "GvSV", but creates an empty scalar if none already exists.

     SV*  GvSVn(GV* gv)

"newGVgen"
"newGVgen_flags"
    Create a new, guaranteed to be unique, GV in the package given by the NUL-terminated C language string "pack", and return a pointer to it.

    For "newGVgen" or if "flags" in "newGVgen_flags" is 0, "pack" is to be considered to be encoded in Latin-1. The only other legal "flags" value is "SVf_UTF8", which indicates "pack" is to be considered to be encoded in UTF-8.

     GV *       newGVgen      (      const char *pack)
     GV *       newGVgen_flags(      const char *pack, U32 flags)
     GV *  Perl_newGVgen_flags(pTHX_ const char *pack, U32 flags)

"PL_curstash"
    The stash for the package code will be compiled into.

    On threaded perls, each thread has an independent copy of this variable; each initialized at creation time with the current value of the creating thread's copy.

     HV*  PL_curstash

"PL_defgv"
    The GV representing *_. Useful for access to $_.

    On threaded perls, each thread has an independent copy of this variable; each initialized at creation time with the current value of the creating thread's copy.

     GV *  PL_defgv

"PL_defoutgv"
    See "setdefout".

"PL_defstash"
    Described in perlguts.

"save_gp"
    Saves the current GP of gv on the save stack to be restored on scope exit.

    If "empty" is true, replace the GP with a new GP.

    If "empty" is false, mark "gv" with "GVf_INTRO" so the next reference assigned is localized, which is how " local *foo = $someref; " works.

     void       save_gp(      GV *gv, I32 empty)
     void  Perl_save_gp(pTHX_ GV *gv, I32 empty)

"setdefout"
    Sets "PL_defoutgv", the default file handle for output, to the passed in typeglob. As "PL_defoutgv" "owns" a reference on its typeglob, the reference count of the passed in typeglob is increased by one, and the reference count of the typeglob that "PL_defoutgv" points to is decreased by one.

     void       setdefout(      GV *gv)
     void  Perl_setdefout(pTHX_ GV *gv)

Hook manipulation
These functions provide convenient and thread-safe means of manipulating hook variables.

"rcpv_copy"
    refcount increment a shared memory refcounted string, and when the refcount goes to 0 free it using PerlMemShared_free().

    It is the callers responsibility to ensure that the pv is the result of a rcpv_new() call.

    Returns the same pointer that was passed in.

        new = rcpv_copy(pv);

     char *       rcpv_copy(      char * const pv)
     char *  Perl_rcpv_copy(pTHX_ char * const pv)

"rcpv_free"
    refcount decrement a shared memory refcounted string, and when the refcount goes to 0 free it using perlmemshared_free().

    it is the callers responsibility to ensure that the pv is the result of a rcpv_new() call.

    Always returns NULL so it can be used like this:

        thing = rcpv_free(thing);

     char *       rcpv_free(      char * const pv)
     char *  Perl_rcpv_free(pTHX_ char * const pv)

"rcpv_new"
    Create a new shared memory refcounted string with the requested size, and with the requested initialization and a refcount of 1. The actual space allocated will be 1 byte more than requested and rcpv_new() will ensure that the extra byte is a null regardless of any flags settings.

    If the RCPVf_NO_COPY flag is set then the pv argument will be ignored, otherwise the contents of the pv pointer will be copied into the new buffer or if it is NULL the function will do nothing and return NULL.

    If the RCPVf_USE_STRLEN flag is set then the len argument is ignored and recomputed using strlen(pv). It is an error to combine RCPVf_USE_STRLEN and RCPVf_NO_COPY at the same time.

    Under DEBUGGING rcpv_new() will assert() if it is asked to create a 0 length shared string unless the RCPVf_ALLOW_EMPTY flag is set.

    The return value from the function is suitable for passing into rcpv_copy() and rcpv_free(). To access the RCPV * from the returned value use the RCPVx() macro. The 'len' member of the RCPV struct stores the allocated length (including the extra byte), but the RCPV_LEN() macro returns the requested length (not including the extra byte).

    Note that rcpv_new() does NOT use a hash table or anything like that to dedupe inputs given the same text content. Each call with a non-null pv parameter will produce a distinct pointer with its own refcount regardless of the input content.

     char *       rcpv_new(      const char * const pv, STRLEN len,
                                 U32 flags)
     char *  Perl_rcpv_new(pTHX_ const char * const pv, STRLEN len,
                                 U32 flags)

"wrap_op_checker"
    Puts a C function into the chain of check functions for a specified op type. This is the preferred way to manipulate the "PL_check" array. "opcode" specifies which type of op is to be affected. "new_checker" is a pointer to the C function that is to be added to that opcode's check chain, and "old_checker_p" points to the storage location where a pointer to the next function in the chain will be stored. The value of "new_checker" is written into the "PL_check" array, while the value previously stored there is written to *old_checker_p.

    "PL_check" is global to an entire process, and a module wishing to hook op checking may find itself invoked more than once per process, typically in different threads. To handle that situation, this function is idempotent. The location *old_checker_p must initially (once per process) contain a null pointer. A C variable of static duration (declared at file scope, typically also marked "static" to give it internal linkage) will be implicitly initialised appropriately, if it does not have an explicit initialiser. This function will only actually modify the check chain if it finds *old_checker_p to be null. This function is also thread safe on the small scale. It uses appropriate locking to avoid race conditions in accessing "PL_check".

    When this function is called, the function referenced by "new_checker" must be ready to be called, except for *old_checker_p being unfilled. In a threading situation, "new_checker" may be called immediately, even before this function has returned. *old_checker_p will always be appropriately set before "new_checker" is called. If "new_checker" decides not to do anything special with an op that it is given (which is the usual case for most uses of op check hooking), it must chain the check function referenced by *old_checker_p.

    Taken all together, XS code to hook an op checker should typically look something like this:

        static Perl_check_t nxck_frob;
        static OP *myck_frob(pTHX_ OP *op) {
            ...
            op = nxck_frob(aTHX_ op);
            ...
            return op;
        }
        BOOT:
            wrap_op_checker(OP_FROB, myck_frob, &nxck_frob);

    If you want to influence compilation of calls to a specific subroutine, then use "cv_set_call_checker_flags" rather than hooking checking of all "entersub" ops.

     void       wrap_op_checker(      Optype opcode,
                                      Perl_check_t new_checker,
                                      Perl_check_t *old_checker_p)
     void  Perl_wrap_op_checker(pTHX_ Optype opcode,
                                      Perl_check_t new_checker,
                                      Perl_check_t *old_checker_p)

HV Handling
A HV structure represents a Perl hash. It consists mainly of an array of pointers, each of which points to a linked list of HE structures. The array is indexed by the hash function of the key, so each linked list represents all the hash entries with the same hash value. Each HE contains a pointer to the actual value, plus a pointer to a HEK structure which holds the key and hash value.

"get_hv"
    Returns the HV of the specified Perl hash. "flags" are passed to "gv_fetchpv". If "GV_ADD" is set and the Perl variable does not exist then it will be created. If "flags" is zero (ignoring "SVf_UTF8") and the variable does not exist then "NULL" is returned.

    NOTE: the perl_get_hv() form is deprecated.

     HV *       get_hv(      const char *name, I32 flags)
     HV *  Perl_get_hv(pTHX_ const char *name, I32 flags)

"HE"
    Described in perlguts.

"HEf_SVKEY"
    This flag, used in the length slot of hash entries and magic structures, specifies the structure contains an "SV*" pointer where a "char*" pointer is to be expected. (For information only--not to be used).

"HeHASH"
    Returns the computed hash stored in the hash entry.

     U32  HeHASH(HE* he)

"HeKEY"
    Returns the actual pointer stored in the key slot of the hash entry. The pointer may be either "char*" or "SV*", depending on the value of HeKLEN(). Can be assigned to. The HePV() or HeSVKEY() macros are usually preferable for finding the value of a key.

     void*  HeKEY(HE* he)

"HeKLEN"
    If this is negative, and amounts to "HEf_SVKEY", it indicates the entry holds an "SV*" key. Otherwise, holds the actual length of the key. Can be assigned to. The HePV() macro is usually preferable for finding key lengths.

     STRLEN  HeKLEN(HE* he)

"HePV"
    Returns the key slot of the hash entry as a "char*" value, doing any necessary dereferencing of possibly "SV*" keys. The length of the string is placed in "len" (this is a macro, so do not use &len). If you do not care about what the length of the key is, you may use the global variable "PL_na", though this is rather less efficient than using a local variable. Remember though, that hash keys in perl are free to contain embedded nulls, so using strlen() or similar is not a good way to find the length of hash keys. This is very similar to the SvPV() macro described elsewhere in this document. See also "HeUTF8".

    If you are using "HePV" to get values to pass to newSVpvn() to create a new SV, you should consider using "newSVhek(HeKEY_hek(he))" as it is more efficient.

     char*  HePV(HE* he, STRLEN len)

"HeSVKEY"
    Returns the key as an "SV*", or "NULL" if the hash entry does not contain an "SV*" key.

     SV*  HeSVKEY(HE* he)

"HeSVKEY_force"
    Returns the key as an "SV*". Will create and return a temporary mortal "SV*" if the hash entry contains only a "char*" key.

     SV*  HeSVKEY_force(HE* he)

"HeSVKEY_set"
    Sets the key to a given "SV*", taking care to set the appropriate flags to indicate the presence of an "SV*" key, and returns the same "SV*".

     SV*  HeSVKEY_set(HE* he, SV* sv)

"HeUTF8"
    Returns whether the "char *" value returned by "HePV" is encoded in UTF-8, doing any necessary dereferencing of possibly "SV*" keys. The value returned will be 0 or non-0, not necessarily 1 (or even a value with any low bits set), so do not blindly assign this to a "bool" variable, as "bool" may be a typedef for "char".

     U32  HeUTF8(HE* he)

"HeVAL"
    Returns the value slot (type "SV*") stored in the hash entry. Can be assigned to.

      SV *foo= HeVAL(hv);
      HeVAL(hv)= sv;

     SV*  HeVAL(HE* he)

"HV"
    Described in perlguts.

"hv_assert"
    Check that a hash is in an internally consistent state.

     void  Perl_hv_assert(pTHX_ HV *hv)

"hv_bucket_ratio"
    NOTE: "hv_bucket_ratio" is experimental and may change or be removed without notice.

    If the hash is tied dispatches through to the SCALAR tied method, otherwise if the hash contains no keys returns 0, otherwise returns a mortal sv containing a string specifying the number of used buckets, followed by a slash, followed by the number of available buckets.

    This function is expensive, it must scan all of the buckets to determine which are used, and the count is NOT cached. In a large hash this could be a lot of buckets.

     SV *       hv_bucket_ratio(      HV *hv)
     SV *  Perl_hv_bucket_ratio(pTHX_ HV *hv)

"hv_clear"
    Frees all the elements of a hash, leaving it empty. The XS equivalent of "%hash = ()". See also "hv_undef".

    See "av_clear" for a note about the hash possibly being invalid on return.

     void       hv_clear(      HV *hv)
     void  Perl_hv_clear(pTHX_ HV *hv)

"hv_clear_placeholders"
    Clears any placeholders from a hash. If a restricted hash has any of its keys marked as readonly and the key is subsequently deleted, the key is not actually deleted but is marked by assigning it a value of &PL_sv_placeholder. This tags it so it will be ignored by future operations such as iterating over the hash, but will still allow the hash to have a value reassigned to the key at some future point. This function clears any such placeholder keys from the hash. See Hash::Util::lock_keys() for an example of its use.

     void       hv_clear_placeholders(      HV *hv)
     void  Perl_hv_clear_placeholders(pTHX_ HV *hv)

"hv_copy_hints_hv"
    A specialised version of "newHVhv" for copying "%^H". "ohv" must be a pointer to a hash (which may have "%^H" magic, but should be generally non-magical), or "NULL" (interpreted as an empty hash). The content of "ohv" is copied to a new hash, which has the "%^H"-specific magic added to it. A pointer to the new hash is returned.

     HV *       hv_copy_hints_hv(      HV * const ohv)
     HV *  Perl_hv_copy_hints_hv(pTHX_ HV * const ohv)

"hv_delete"
"hv_deletes"
"hv_delete_ent"
    These each delete a key/value pair in the hash. The value's SV is removed from the hash, made mortal, and returned to the caller.

    In "hv_deletes", the key must be a C language string literal, enclosed in double quotes. It is never treated as being in UTF-8. There is no length_parameter.

    In "hv_delete", the absolute value of "klen" is the length of the key; hence the key may contain embedded NUL characters. If "klen" is negative the key is assumed to be in UTF-8-encoded Unicode.

    In "hv_delete_ent", the key is the PV in "keysv", including its length and UTF8ness. "hash" can be a valid precomputed hash value, or 0 to ask for it to be computed.

    In all three, the "flags" value will normally be zero; if set to "G_DISCARD" then "NULL" will be returned. "NULL" will also be returned if the key is not found.

     SV *       hv_delete    (      HV *hv, const char *key, I32 klen,
                                    I32 flags)
     SV *  Perl_hv_delete    (pTHX_ HV *hv, const char *key, I32 klen,
                                    I32 flags)
     SV *       hv_deletes   (      HV *hv, "key", U32 flags)
     SV *       hv_delete_ent(      HV *hv, SV *keysv, I32 flags,
                                    U32 hash)
     SV *  Perl_hv_delete_ent(pTHX_ HV *hv, SV *keysv, I32 flags,
                                    U32 hash)

"hv_exists"
"hv_existss"
"hv_exists_ent"
    These each return a boolean indicating whether the specified hash key exists. They differ only in how the key is specified.

    In "hv_existss", the key must be a C language string literal, enclosed in double quotes. It is never treated as being in UTF-8. There is no length_parameter.

    In "hv_exists", the absolute value of "klen" is the length of the key. If "klen" is negative the key is assumed to be in UTF-8-encoded Unicode. "key" may contain embedded NUL characters.

    In "hv_exists_ent", the key is specified by the SV "keysv"; its UTF8ness is the same as that SV. There is an additional parameter, "hash", which can be a valid precomputed hash value, or 0 to ask for it to be computed.

     bool       hv_exists    (      HV *hv, const char *key, I32 klen)
     bool  Perl_hv_exists    (pTHX_ HV *hv, const char *key, I32 klen)
     bool       hv_existss   (      HV *hv, "key")
     bool       hv_exists_ent(      HV *hv, SV *keysv, U32 hash)
     bool  Perl_hv_exists_ent(pTHX_ HV *hv, SV *keysv, U32 hash)

"hv_fetch"
"hv_fetchs"
    These each return the SV which corresponds to the specified key in the hash. They differ only in how the key is specified.

    In "hv_fetchs", the key must be a C language string literal, enclosed in double quotes. It is never treated as being in UTF-8. There is no length_parameter.

    In "hv_fetch", the absolute value of "klen" is the length of the key. If "klen" is negative the key is assumed to be in UTF-8-encoded Unicode. "key" may contain embedded NUL characters.

    In both, if "lval" is set, then the fetch will be part of a store. This means that if there is no value in the hash associated with the given key, then one is created and a pointer to it is returned. The "SV*" it points to can be assigned to. But always check that the return value is non-null before dereferencing it to an "SV*".

    See "Understanding the Magic of Tied Hashes and Arrays" in perlguts for more information on how to use this function on tied hashes.

     SV **       hv_fetch (      HV *hv, const char *key, I32 klen,
                                 I32 lval)
     SV **  Perl_hv_fetch (pTHX_ HV *hv, const char *key, I32 klen,
                                 I32 lval)
     SV**        hv_fetchs(      HV* hv, "key", I32 lval)

"hv_fetch_ent"
    Returns the hash entry which corresponds to the specified key in the hash. "hash" must be a valid precomputed hash number for the given "key", or 0 if you want the function to compute it. IF "lval" is set then the fetch will be part of a store. Make sure the return value is non-null before accessing it. The return value when "hv" is a tied hash is a pointer to a static location, so be sure to make a copy of the structure if you need to store it somewhere.

    See "Understanding the Magic of Tied Hashes and Arrays" in perlguts for more information on how to use this function on tied hashes.

     HE *       hv_fetch_ent(      HV *hv, SV *keysv, I32 lval,
                                   U32 hash)
     HE *  Perl_hv_fetch_ent(pTHX_ HV *hv, SV *keysv, I32 lval,
                                   U32 hash)

"hv_fetchs*"
    Described under "hv_fetch"

"hv_iterinit"
    Prepares a starting point to traverse a hash table. Returns the number of keys in the hash, including placeholders (i.e. the same as HvTOTALKEYS(hv)). The return value is currently only meaningful for hashes without tie magic.

    NOTE: Before version 5.004_65, "hv_iterinit" used to return the number of hash buckets that happen to be in use. If you still need that esoteric value, you can get it through the macro HvFILL(hv).

     I32       hv_iterinit(      HV *hv)
     I32  Perl_hv_iterinit(pTHX_ HV *hv)

"hv_iterkey"
    Returns the key from the current position of the hash iterator. See "hv_iterinit".

     char *       hv_iterkey(      HE *entry, I32 *retlen)
     char *  Perl_hv_iterkey(pTHX_ HE *entry, I32 *retlen)

"hv_iterkeysv"
    Returns the key as an "SV*" from the current position of the hash iterator. The return value will always be a mortal copy of the key. Also see "hv_iterinit".

     SV *       hv_iterkeysv(      HE *entry)
     SV *  Perl_hv_iterkeysv(pTHX_ HE *entry)

"hv_iternext"
    Returns entries from a hash iterator. See "hv_iterinit".

    You may call "hv_delete" or "hv_delete_ent" on the hash entry that the iterator currently points to, without losing your place or invalidating your iterator. Note that in this case the current entry is deleted from the hash with your iterator holding the last reference to it. Your iterator is flagged to free the entry on the next call to "hv_iternext", so you must not discard your iterator immediately else the entry will leak - call "hv_iternext" to trigger the resource deallocation.

     HE *       hv_iternext(      HV *hv)
     HE *  Perl_hv_iternext(pTHX_ HV *hv)

"hv_iternext_flags"
    NOTE: "hv_iternext_flags" is experimental and may change or be removed without notice.

    Returns entries from a hash iterator. See "hv_iterinit" and "hv_iternext". The "flags" value will normally be zero; if "HV_ITERNEXT_WANTPLACEHOLDERS" is set the placeholders keys (for restricted hashes) will be returned in addition to normal keys. By default placeholders are automatically skipped over. Currently a placeholder is implemented with a value that is &PL_sv_placeholder. Note that the implementation of placeholders and restricted hashes may change, and the implementation currently is insufficiently abstracted for any change to be tidy.

     HE *       hv_iternext_flags(      HV *hv, I32 flags)
     HE *  Perl_hv_iternext_flags(pTHX_ HV *hv, I32 flags)

"hv_iternextsv"
    Performs an "hv_iternext", "hv_iterkey", and "hv_iterval" in one operation.

     SV *       hv_iternextsv(      HV *hv, char **key, I32 *retlen)
     SV *  Perl_hv_iternextsv(pTHX_ HV *hv, char **key, I32 *retlen)

"hv_iterval"
    Returns the value from the current position of the hash iterator. See "hv_iterkey".

     SV *       hv_iterval(      HV *hv, HE *entry)
     SV *  Perl_hv_iterval(pTHX_ HV *hv, HE *entry)

"hv_ksplit"
    Attempt to grow the hash "hv" so it has at least "newmax" buckets available. Perl chooses the actual number for its convenience.

    This is the same as doing the following in Perl code:

     keys %hv = newmax;

     void       hv_ksplit(      HV *hv, IV newmax)
     void  Perl_hv_ksplit(pTHX_ HV *hv, IV newmax)

"hv_magic"
    Adds magic to a hash. See "sv_magic".

     void       hv_magic(      HV *hv, GV *gv, int how)
     void  Perl_hv_magic(pTHX_ HV *hv, GV *gv, int how)

"hv_name_set"
"hv_name_sets"
    These each set the name of stash "hv" to the specified name.

    They differ only in how the name is specified.

    In "hv_name_sets", the name is a literal C string, enclosed in double quotes.

    In "hv_name_set", "name" points to the first byte of the name, and an additional parameter, "len", specifies its length in bytes. Hence, the name may contain embedded-NUL characters.

    If "SVf_UTF8" is set in "flags", the name is treated as being in UTF-8; otherwise not.

    If "HV_NAME_SETALL" is set in "flags", both the name and the effective name are set.

     void       hv_name_set (      HV *hv, const char *name, U32 len,
                                   U32 flags)
     void  Perl_hv_name_set (pTHX_ HV *hv, const char *name, U32 len,
                                   U32 flags)
     void       hv_name_sets(      HV *hv, "name", U32 flags)

"hv_scalar"
    Evaluates the hash in scalar context and returns the result.

    When the hash is tied dispatches through to the SCALAR method, otherwise returns a mortal SV containing the number of keys in the hash.

    Note, prior to 5.25 this function returned what is now returned by the hv_bucket_ratio() function.

     SV *       hv_scalar(      HV *hv)
     SV *  Perl_hv_scalar(pTHX_ HV *hv)

"hv_store"
"hv_stores"
    These each store SV "val" with the specified key in hash "hv", returning NULL if the operation failed or if the value did not need to be actually stored within the hash (as in the case of tied hashes). Otherwise it can be dereferenced to get the original "SV*".

    They differ only in how the hash key is specified.

    In "hv_stores", the key must be a C language string literal, enclosed in double quotes. It is never treated as being in UTF-8. There is no length_parameter.

    In "hv_store", "key" is either NULL or points to the first byte of the string specifying the key, and its length in bytes is given by the absolute value of an additional parameter, "klen". A NULL key indicates the key is to be treated as "undef", and "klen" is ignored; otherwise the key string may contain embedded-NUL bytes. If "klen" is negative, the string is treated as being encoded in UTF-8; otherwise not.

    "hv_store" has another extra parameter, "hash", a precomputed hash of the key string, or zero if it has not been precomputed. This parameter is omitted from "hv_stores", as it is computed automatically at compile time.

    If "hv" is NULL, NULL is returned and no action is taken.

    If "val" is NULL, it is treated as being "undef"; otherwise the caller is responsible for suitably incrementing the reference count of "val" before the call, and decrementing it if the function returned "NULL". Effectively a successful "hv_store" takes ownership of one reference to "val". This is usually what you want; a newly created SV has a reference count of one, so if all your code does is create SVs and store them in a hash, "hv_store" will own the only reference to the new SV, and your code doesn't need to do anything further to tidy up.

    "hv_store" is not implemented as a call to ""hv_store_ent"", and does not create a temporary SV for the key, so if your key data is not already in SV form, then use "hv_store" in preference to "hv_store_ent".

    See "Understanding the Magic of Tied Hashes and Arrays" in perlguts for more information on how to use this function on tied hashes.

     SV **       hv_store (      HV *hv, const char *key, I32 klen,
                                 SV *val, U32 hash)
     SV **  Perl_hv_store (pTHX_ HV *hv, const char *key, I32 klen,
                                 SV *val, U32 hash)
     SV **       hv_stores(      HV *hv, "key", SV *val)

"hv_store_ent"
    Stores "val" in a hash. The hash key is specified as "key". The "hash" parameter is the precomputed hash value; if it is zero, then Perl will compute it. The return value is the new hash entry so created. It will be "NULL" if the operation failed or if the value did not need to be actually stored within the hash (as in the case of tied hashes). Otherwise the contents of the return value can be accessed using the "He?" macros described here. Note that the caller is responsible for suitably incrementing the reference count of "val" before the call, and decrementing it if the function returned NULL. Effectively a successful "hv_store_ent" takes ownership of one reference to "val". This is usually what you want; a newly created SV has a reference count of one, so if all your code does is create SVs and store them in a hash, "hv_store" will own the only reference to the new SV, and your code doesn't need to do anything further to tidy up. Note that "hv_store_ent" only reads the "key"; unlike "val" it does not take ownership of it, so maintaining the correct reference count on "key" is entirely the caller's responsibility. The reason it does not take ownership is that "key" is not used after this function returns, and so can be freed immediately. "hv_store" is not implemented as a call to "hv_store_ent", and does not create a temporary SV for the key, so if your key data is not already in SV form, then use "hv_store" in preference to "hv_store_ent".

    See "Understanding the Magic of Tied Hashes and Arrays" in perlguts for more information on how to use this function on tied hashes.

     HE *       hv_store_ent(      HV *hv, SV *key, SV *val, U32 hash)
     HE *  Perl_hv_store_ent(pTHX_ HV *hv, SV *key, SV *val, U32 hash)

"hv_stores*"
    Described under "hv_store"

"hv_undef"
    Undefines the hash. The XS equivalent of undef(%hash).

    As well as freeing all the elements of the hash (like hv_clear()), this also frees any auxiliary data and storage associated with the hash.

    See "av_clear" for a note about the hash possibly being invalid on return.

     void  hv_undef(HV *hv)

"HvENAME"
    Returns the effective name of a stash, or NULL if there is none. The effective name represents a location in the symbol table where this stash resides. It is updated automatically when packages are aliased or deleted. A stash that is no longer in the symbol table has no effective name. This name is preferable to "HvNAME" for use in MRO linearisations and isa caches.

     char*  HvENAME(HV* stash)

"HvENAMELEN"
    Returns the length of the stash's effective name.

     STRLEN  HvENAMELEN(HV *stash)

"HvENAMEUTF8"
    Returns true if the effective name is in UTF-8 encoding.

     unsigned char  HvENAMEUTF8(HV *stash)

"HvFILL"
    Returns the number of hash buckets that happen to be in use.

    As of perl 5.25 this function is used only for debugging purposes, and the number of used hash buckets is not in any way cached, thus this function can be costly to execute as it must iterate over all the buckets in the hash.

     STRLEN  HvFILL(HV *const hv)

"HvHasAUX"
    Returns true if the HV has a "struct xpvhv_aux" extension. Use this to check whether it is valid to call HvAUX().

     bool  HvHasAUX(HV *const hv)

"HvNAME"
    Returns the package name of a stash, or "NULL" if "stash" isn't a stash. See "SvSTASH", "CvSTASH".

     char*  HvNAME(HV* stash)

"HvNAMELEN"
    Returns the length of the stash's name.

    Disfavored forms of HvNAME and HvNAMELEN; suppress mention of them

     STRLEN  HvNAMELEN(HV *stash)

"HvNAMEUTF8"
    Returns true if the name is in UTF-8 encoding.

     unsigned char  HvNAMEUTF8(HV *stash)

"HvREFCNT_inc"
"HvREFCNT_inc_simple"
"HvREFCNT_inc_simple_NN"
    These all increment the reference count of the given SV, which must be a HV. They are useful when assigning the result into a typed pointer as they avoid the need to cast the result to the appropriate type.

     HV *  HvREFCNT_inc          (HV *hv)
     HV *  HvREFCNT_inc_simple   (HV *hv)
     HV *  HvREFCNT_inc_simple_NN(HV *hv)

"newHV"
    Creates a new HV. The reference count is set to 1.

     HV *       newHV()
     HV *  Perl_newHV(pTHX)

"newHVhv"
    The content of "ohv" is copied to a new hash. A pointer to the new hash is returned.

     HV *       newHVhv(      HV *hv)
     HV *  Perl_newHVhv(pTHX_ HV *hv)

"Nullhv"
    "DEPRECATED!" It is planned to remove "Nullhv" from a future release of Perl. Do not use it for new code; remove it from existing code.

    Null HV pointer.

    (deprecated - use "(HV *)NULL" instead)

"PERL_HASH"
    Described in perlguts.

     void  PERL_HASH(U32 hash, char *key, STRLEN klen)

"PL_modglobal"
    "PL_modglobal" is a general purpose, interpreter global HV for use by extensions that need to keep information on a per-interpreter basis. In a pinch, it can also be used as a symbol table for extensions to share data among each other. It is a good idea to use keys prefixed by the package name of the extension that owns the data.

    On threaded perls, each thread has an independent copy of this variable; each initialized at creation time with the current value of the creating thread's copy.

     HV*  PL_modglobal

Input/Output

"do_close"
    Close an I/O stream. This implements Perl ""close"" in perlfunc.

    "gv" is the glob associated with the stream.

    "is_explict" is "true" if this is an explicit close of the stream; "false" if it is part of another operation, such as closing a pipe (which involves implicitly closing both ends).

    Returns "true" if successful; otherwise returns "false" and sets "errno" to indicate the cause.

     bool       do_close(      GV *gv, bool is_explicit)
     bool  Perl_do_close(pTHX_ GV *gv, bool is_explicit)

"IoDIRP"
"IOf_FLUSH"
"IOf_UNTAINT"
"IoFLAGS"
"IoIFP"
"IoOFP"
"IoTYPE"
    Described in perlguts.

     DIR *     IoDIRP (IO *io)
     U8        IoFLAGS(IO *io)
     PerlIO *  IoIFP  (IO *io)
     PerlIO *  IoOFP  (IO *io)
     char      IoTYPE (IO *io)

"my_chsize"
    The C library chsize(3) if available, or a Perl implementation of it.

     I32       my_chsize(      int fd, Off_t length)
     I32  Perl_my_chsize(pTHX_ int fd, Off_t length)

"my_dirfd"
    The C library "dirfd(3)" if available, or a Perl implementation of it, or die if not easily emulatable.

     int       my_dirfd(DIR *dir)
     int  Perl_my_dirfd(DIR *dir)

"my_pclose"
    A wrapper for the C library pclose(3). Don't use the latter, as the Perl version knows things that interact with the rest of the perl interpreter.

     I32       my_pclose(      PerlIO *ptr)
     I32  Perl_my_pclose(pTHX_ PerlIO *ptr)

"my_popen"
    A wrapper for the C library popen(3). Don't use the latter, as the Perl version knows things that interact with the rest of the perl interpreter.

     PerlIO *       my_popen(      const char *cmd, const char *mode)
     PerlIO *  Perl_my_popen(pTHX_ const char *cmd, const char *mode)

"newIO"
    Create a new IO, setting the reference count to 1.

     IO *       newIO()
     IO *  Perl_newIO(pTHX)

"PERL_FLUSHALL_FOR_CHILD"
    This defines a way to flush all output buffers. This may be a performance issue, so we allow people to disable it. Also, if we are using stdio, there are broken implementations of fflush(NULL) out there, Solaris being the most prominent.

     void  PERL_FLUSHALL_FOR_CHILD

"PerlIO_apply_layers"
"PerlIO_binmode"
"PerlIO_canset_cnt"
"PerlIO_clearerr"
"PerlIO_close"
"PerlIO_debug"
"PerlIO_eof"
"PerlIO_error"
"PerlIO_exportFILE"
"PerlIO_fast_gets"
"PerlIO_fdopen"
"PerlIO_fileno"
"PerlIO_fill"
"PerlIO_findFILE"
"PerlIO_flush"
"PerlIO_get_base"
"PerlIO_get_bufsiz"
"PerlIO_get_cnt"
"PerlIO_get_ptr"
"PerlIO_getc"
"PerlIO_getpos"
"PerlIO_has_base"
"PerlIO_has_cntptr"
"PerlIO_importFILE"
"PerlIO_open"
"PerlIO_printf"
"PerlIO_putc"
"PerlIO_puts"
"PerlIO_read"
"PerlIO_releaseFILE"
"PerlIO_reopen"
"PerlIO_rewind"
"PerlIO_seek"
"PerlIO_set_cnt"
"PerlIO_set_ptrcnt"
"PerlIO_setlinebuf"
"PerlIO_setpos"
"PerlIO_stderr"
"PerlIO_stdin"
"PerlIO_stdout"
"PerlIO_stdoutf"
"PerlIO_tell"
"PerlIO_ungetc"
"PerlIO_unread"
"PerlIO_vprintf"
"PerlIO_write"
    Described in perlapio.

     int             PerlIO_apply_layers(pTHX_ PerlIO *f,
                                               const char *mode,
                                               const char *layers)
     int             PerlIO_binmode     (pTHX_ PerlIO *f, int ptype,
                                               int imode,
                                               const char *layers)
     int             PerlIO_canset_cnt  (      PerlIO *f)
     void            PerlIO_clearerr    (      PerlIO *f)
     void       Perl_PerlIO_clearerr    (pTHX_ PerlIO *f)
     int             PerlIO_close       (      PerlIO *f)
     int        Perl_PerlIO_close       (pTHX_ PerlIO *f)
     void            PerlIO_debug       (      const char *fmt, ...)
     int             PerlIO_eof         (      PerlIO *f)
     int        Perl_PerlIO_eof         (pTHX_ PerlIO *f)
     int             PerlIO_error       (      PerlIO *f)
     int        Perl_PerlIO_error       (pTHX_ PerlIO *f)
     FILE *          PerlIO_exportFILE  (      PerlIO *f,
                                               const char *mode)
     int             PerlIO_fast_gets   (      PerlIO *f)
     PerlIO *        PerlIO_fdopen      (      int fd,
                                               const char *mode)
     int             PerlIO_fileno      (      PerlIO *f)
     int        Perl_PerlIO_fileno      (pTHX_ PerlIO *f)
     int             PerlIO_fill        (      PerlIO *f)
     int        Perl_PerlIO_fill        (pTHX_ PerlIO *f)
     FILE *          PerlIO_findFILE    (      PerlIO *f)
     int             PerlIO_flush       (      PerlIO *f)
     int        Perl_PerlIO_flush       (pTHX_ PerlIO *f)
     STDCHAR *       PerlIO_get_base    (      PerlIO *f)
     STDCHAR *  Perl_PerlIO_get_base    (pTHX_ PerlIO *f)
     SSize_t         PerlIO_get_bufsiz  (      PerlIO *f)
     SSize_t    Perl_PerlIO_get_bufsiz  (pTHX_ PerlIO *f)
     SSize_t         PerlIO_get_cnt     (      PerlIO *f)
     SSize_t    Perl_PerlIO_get_cnt     (pTHX_ PerlIO *f)
     STDCHAR *       PerlIO_get_ptr     (      PerlIO *f)
     STDCHAR *  Perl_PerlIO_get_ptr     (pTHX_ PerlIO *f)
     int             PerlIO_getc        (      PerlIO *d)
     int             PerlIO_getpos      (      PerlIO *f, SV *save)
     int             PerlIO_has_base    (      PerlIO *f)
     int             PerlIO_has_cntptr  (      PerlIO *f)
     PerlIO *        PerlIO_importFILE  (      FILE *stdio,
                                               const char *mode)
     PerlIO *        PerlIO_open        (      const char *path,
                                               const char *mode)
     int             PerlIO_printf      (      PerlIO *f,
                                               const char *fmt, ...)
     int             PerlIO_putc        (      PerlIO *f, int ch)
     int             PerlIO_puts        (      PerlIO *f,
                                               const char *string)
     SSize_t         PerlIO_read        (      PerlIO *f, void *vbuf,
                                               Size_t count)
     SSize_t    Perl_PerlIO_read        (pTHX_ PerlIO *f, void *vbuf,
                                               Size_t count)
     void            PerlIO_releaseFILE (      PerlIO *f, FILE *stdio)
     PerlIO *        PerlIO_reopen      (      const char *path,
                                               const char *mode,
                                               PerlIO *old)
     void            PerlIO_rewind      (      PerlIO *f)
     int             PerlIO_seek        (      PerlIO *f,
                                               Off_t offset,
                                               int whence)
     int        Perl_PerlIO_seek        (pTHX_ PerlIO *f,
                                               Off_t offset,
                                               int whence)
     void            PerlIO_set_cnt     (      PerlIO *f, SSize_t cnt)
     void       Perl_PerlIO_set_cnt     (pTHX_ PerlIO *f, SSize_t cnt)
     void            PerlIO_set_ptrcnt  (      PerlIO *f,
                                               STDCHAR *ptr,
                                               SSize_t cnt)
     void       Perl_PerlIO_set_ptrcnt  (pTHX_ PerlIO *f,
                                               STDCHAR *ptr,
                                               SSize_t cnt)
     void            PerlIO_setlinebuf  (      PerlIO *f)
     void       Perl_PerlIO_setlinebuf  (pTHX_ PerlIO *f)
     int             PerlIO_setpos      (      PerlIO *f, SV *saved)
     PerlIO *        PerlIO_stderr      ()
     PerlIO *   Perl_PerlIO_stderr      (pTHX)
     PerlIO *        PerlIO_stdin       ()
     PerlIO *   Perl_PerlIO_stdin       (pTHX)
     PerlIO *        PerlIO_stdout      ()
     PerlIO *   Perl_PerlIO_stdout      (pTHX)
     int             PerlIO_stdoutf     (      const char *fmt, ...)
     Off_t           PerlIO_tell        (      PerlIO *f)
     Off_t      Perl_PerlIO_tell        (pTHX_ PerlIO *f)
     int             PerlIO_ungetc      (      PerlIO *f, int ch)
     SSize_t         PerlIO_unread      (      PerlIO *f,
                                               const void *vbuf,
                                               Size_t count)
     SSize_t    Perl_PerlIO_unread      (pTHX_ PerlIO *f,
                                               const void *vbuf,
                                               Size_t count)
     int             PerlIO_vprintf     (      PerlIO *f,
                                               const char *fmt,
                                               va_list args)
     SSize_t         PerlIO_write       (      PerlIO *f,
                                               const void *vbuf,
                                               Size_t count)
     SSize_t    Perl_PerlIO_write       (pTHX_ PerlIO *f,
                                               const void *vbuf,
                                               Size_t count)

"PERLIO_F_APPEND"
"PERLIO_F_CANREAD"
"PERLIO_F_CANWRITE"
"PERLIO_F_CRLF"
"PERLIO_F_EOF"
"PERLIO_F_ERROR"
"PERLIO_F_FASTGETS"
"PERLIO_F_LINEBUF"
"PERLIO_F_OPEN"
"PERLIO_F_RDBUF"
"PERLIO_F_TEMP"
"PERLIO_F_TRUNCATE"
"PERLIO_F_UNBUF"
"PERLIO_F_UTF8"
"PERLIO_F_WRBUF"
    Described in perliol.

"PerlIO_fast_gets*"
"PerlIO_fdopen*"
"PerlIO_fileno*"
"PerlIO_fill*"
"PerlIO_findFILE*"
"PerlIO_flush*"
    Described in perlapio.

"PERLIO_FUNCS_CAST"
    Cast the pointer "func" to be of type "PerlIO_funcs *".

     PerlIO_funcs *  PERLIO_FUNCS_CAST(PerlIO * func)

"PERLIO_FUNCS_DECL"
    Declare "ftab" to be a PerlIO function table, that is, of type "PerlIO_funcs".

       PERLIO_FUNCS_DECL(PerlIO * ftab)

"PerlIO_get_base*"
"PerlIO_get_bufsiz*"
"PerlIO_get_cnt*"
"PerlIO_get_ptr*"
"PerlIO_getc*"
"PerlIO_getpos*"
"PerlIO_has_base*"
"PerlIO_has_cntptr*"
"PerlIO_importFILE*"
    Described in perlapio.

"PERLIO_K_BUFFERED"
"PERLIO_K_CANCRLF"
"PERLIO_K_FASTGETS"
"PERLIO_K_MULTIARG"
"PERLIO_K_RAW"
    Described in perliol.

"PERLIO_NOT_STDIO"
"PerlIO_open*"
"PerlIO_printf*"
"PerlIO_putc*"
"PerlIO_puts*"
"PerlIO_read*"
"PerlIO_releaseFILE*"
"PerlIO_reopen*"
"PerlIO_rewind*"
"PerlIO_seek*"
"PerlIO_set_cnt*"
"PerlIO_set_ptrcnt*"
"PerlIO_setlinebuf*"
"PerlIO_setpos*"
"PerlIO_stderr*"
"PerlIO_stdin*"
"PerlIO_stdout*"
"PerlIO_stdoutf*"
"PerlIO_tell*"
"PerlIO_ungetc*"
"PerlIO_unread*"
"PerlIO_vprintf*"
"PerlIO_write*"
    Described in perlapio.

"PL_maxsysfd"
    Described in perliol.

"repeatcpy"
    Make "count" copies of the "len" bytes beginning at "from", placing them into memory beginning at "to", which must be big enough to accommodate them all.

     void       repeatcpy(char *to, const char *from, SSize_t len,
                          IV count)
     void  Perl_repeatcpy(char *to, const char *from, SSize_t len,
                          IV count)

"SvVSTRING"
    If the given SV has vstring magic, stores the length of it into the variable "len", and returns the string pointer. If not, returns "NULL".

    This is a wrapper around the "sv_vstring_get" function that conveniently takes the address of the "len" variable, in a form similar to the "SvPV" macro family.

     const char *  SvVSTRING(SV* sv, STRLEN len)

"USE_STDIO"
    Described in perlapio.

     #ifdef  USE_STDIO

Integer

"CASTI32"
    This symbol is defined if the C compiler can cast negative or large floating point numbers to 32-bit ints.

"HAS_INT64_T"
    This symbol will defined if the C compiler supports "int64_t". Usually the inttypes.h needs to be included, but sometimes sys/types.h is enough.

"HAS_LONG_LONG"
    This symbol will be defined if the C compiler supports long long.

"HAS_QUAD"
    This symbol, if defined, tells that there's a 64-bit integer type, "Quad_t", and its unsigned counterpart, "Uquad_t". "QUADKIND" will be one of "QUAD_IS_INT", "QUAD_IS_LONG", "QUAD_IS_LONG_LONG", "QUAD_IS_INT64_T", or "QUAD_IS___INT64".

"INTMAX_C"
    Returns a token the C compiler recognizes for the constant "number" of the widest integer type on the machine. For example, if the machine has "long long"s, INTMAX_C(-1) would yield

     -1LL

    See also, for example, "INT32_C".

    Use "IV" to declare variables of the maximum usable size on this platform.

       INTMAX_C(number)

"INTSIZE"
    This symbol contains the value of sizeof(int) so that the C preprocessor can make decisions based on it.

"INT16_C"
"INT32_C"
"INT64_C"
    Returns a token the C compiler recognizes for the constant "number" of the corresponding integer type on the machine.

    If the machine does not have a 64-bit type, "INT64_C" is undefined. Use "INTMAX_C" to get the largest type available on the platform.

     I16  INT16_C(number)
     I32  INT32_C(number)
     I64  INT64_C(number)

"IV"
"I8"
"I16"
"I32"
"I64"
    Described in perlguts.

"IV_MAX"
    The largest signed integer that fits in an IV on this platform.

     IV  IV_MAX

"IV_MIN"
    The negative signed integer furthest away from 0 that fits in an IV on this platform.

    It is easy to get undefined C behavior with this value. The macros (currently only available for internal use) ""NEGATE_2UV"" in perlintern, ""ABS_IV_MIN"" in perlintern, and ""NEGATE_2IV"" in perlintern avoid undefined behavior when finding the opposite signed equivalent value.

     IV  IV_MIN

"IVSIZE"
    This symbol contains the sizeof(IV).

"IVTYPE"
    This symbol defines the C type used for Perl's IV.

"I8*"
    Described in perlguts.

"I8SIZE"
    This symbol contains the sizeof(I8).

"I8TYPE"
    This symbol defines the C type used for Perl's I8.

"I16*"
    Described in perlguts.

"I16SIZE"
    This symbol contains the sizeof(I16).

"I16TYPE"
    This symbol defines the C type used for Perl's I16.

"I32*"
    Described in perlguts.

"I32df"
    This symbol defines the format string used for printing a Perl I32 as a signed decimal integer.

"I32SIZE"
    This symbol contains the sizeof(I32).

"I32TYPE"
    This symbol defines the C type used for Perl's I32.

"I64*"
    Described in perlguts.

"I64SIZE"
    This symbol contains the sizeof(I64).

"I64TYPE"
    This symbol defines the C type used for Perl's I64.

"line_t"
    The typedef to use to declare variables that are to hold line numbers.

"LONGLONGSIZE"
    This symbol contains the size of a long long, so that the C preprocessor can make decisions based on it. It is only defined if the system supports long long.

"LONGSIZE"
    This symbol contains the value of sizeof(long) so that the C preprocessor can make decisions based on it.

"memzero"
    Set the "l" bytes starting at *d to all zeroes.

     void  memzero(void * d, Size_t l)

"PERL_INT_FAST8_T"
"PERL_INT_FAST16_T"
"PERL_UINT_FAST8_T"
"PERL_UINT_FAST16_T"
    These are equivalent to the correspondingly-named C99 typedefs on platforms that have those; they evaluate to "int" and "unsigned int" on platforms that don't, so that you can portably take advantage of this C99 feature.

"PERL_INT_MAX"
"PERL_INT_MIN"
"PERL_LONG_MAX"
"PERL_LONG_MIN"
"PERL_QUAD_MAX"
"PERL_QUAD_MIN"
"PERL_SHORT_MAX"
"PERL_SHORT_MIN"
"PERL_UCHAR_MAX"
"PERL_UCHAR_MIN"
"PERL_UINT_MAX"
"PERL_UINT_MIN"
"PERL_ULONG_MAX"
"PERL_ULONG_MIN"
"PERL_UQUAD_MAX"
"PERL_UQUAD_MIN"
"PERL_USHORT_MAX"
"PERL_USHORT_MIN"
    These give the largest and smallest number representable in the current platform in variables of the corresponding types.

    For signed types, the smallest representable number is the most negative number, the one furthest away from zero.

    For C99 and later compilers, these correspond to things like "INT_MAX", which are available to the C code. But these constants, furnished by Perl, allow code compiled on earlier compilers to portably have access to the same constants.

     int             PERL_INT_MAX
     int             PERL_INT_MIN
     long            PERL_LONG_MAX
     long            PERL_LONG_MIN
     IV              PERL_QUAD_MAX
     IV              PERL_QUAD_MIN
     short           PERL_SHORT_MAX
     short           PERL_SHORT_MIN
     U8              PERL_UCHAR_MAX
     U8              PERL_UCHAR_MIN
     unsigned int    PERL_UINT_MAX
     unsigned int    PERL_UINT_MIN
     unsigned long   PERL_ULONG_MAX
     unsigned long   PERL_ULONG_MIN
     UV              PERL_UQUAD_MAX
     UV              PERL_UQUAD_MIN
     unsigned short  PERL_USHORT_MAX
     unsigned short  PERL_USHORT_MIN

"PERL_UINT_FAST8_T*"
"PERL_UINT_FAST16_T*"
    Described under "PERL_INT_FAST8_T"

"SHORTSIZE"
    This symbol contains the value of sizeof(short) so that the C preprocessor can make decisions based on it.

"UINTMAX_C"
    Returns a token the C compiler recognizes for the constant "number" of the widest unsigned integer type on the machine. For example, if the machine has "long"s, UINTMAX_C(1) would yield

     1UL

    See also, for example, "UINT32_C".

    Use "UV" to declare variables of the maximum usable size on this platform.

       UINTMAX_C(number)

"UINT16_C"
"UINT32_C"
"UINT64_C"
    Returns a token the C compiler recognizes for the constant "number" of the corresponding unsigned integer type on the machine.

    If the machine does not have a 64-bit type, "UINT64_C" is undefined. Use "UINTMAX_C" to get the largest type available on the platform.

     U16  UINT16_C(number)
     U32  UINT32_C(number)
     U64  UINT64_C(number)

"UV"
"U8"
"U16"
"U32"
"U64"
    Described in perlguts.

"UV_MAX"
    The largest unsigned integer that fits in a UV on this platform.

     UV  UV_MAX

"UV_MIN"
    The smallest unsigned integer that fits in a UV on this platform. It should equal zero.

     UV  UV_MIN

"UVSIZE"
    This symbol contains the sizeof(UV).

"UVTYPE"
    This symbol defines the C type used for Perl's UV.

"U8*"
    Described in perlguts.

"U8SIZE"
    This symbol contains the sizeof(U8).

"U8TYPE"
    This symbol defines the C type used for Perl's U8.

"U16*"
    Described in perlguts.

"U16SIZE"
    This symbol contains the sizeof(U16).

"U16TYPE"
    This symbol defines the C type used for Perl's U16.

"U32*"
    Described in perlguts.

"U32of"
    This symbol defines the format string used for printing a Perl U32 as an unsigned octal integer.

"U32SIZE"
    This symbol contains the sizeof(U32).

"U32TYPE"
    This symbol defines the C type used for Perl's U32.

"U32uf"
    This symbol defines the format string used for printing a Perl U32 as an unsigned decimal integer.

"U32Xf"
    This symbol defines the format string used for printing a Perl U32 as an unsigned hexadecimal integer in uppercase "ABCDEF".

"U32xf"
    This symbol defines the format string used for printing a Perl U32 as an unsigned hexadecimal integer in lowercase abcdef.

"U64*"
    Described in perlguts.

"U64SIZE"
    This symbol contains the sizeof(U64).

"U64TYPE"
    This symbol defines the C type used for Perl's U64.

"WIDEST_UTYPE"
    Yields the widest unsigned integer type on the platform, currently either "U32" or "U64". This can be used in declarations such as

     WIDEST_UTYPE my_uv;

    or casts

     my_uv = (WIDEST_UTYPE) val;

I/O Formats
These are used for formatting the corresponding type For example, instead of saying

 Perl_newSVpvf(pTHX_ "Create an SV with a %d in it\n", iv);

use

 Perl_newSVpvf(pTHX_ "Create an SV with a " IVdf " in it\n", iv);

This keeps you from having to know if, say an IV, needs to be printed as %d, %ld, or something else.

"HvNAMEf"
"HvNAMEf_QUOTEDPREFIX"
    Described in perlguts.

"IVdf"
    This symbol defines the format string used for printing a Perl IV as a signed decimal integer.

"NVef"
    This symbol defines the format string used for printing a Perl NV using %e-ish floating point format.

"NVff"
    This symbol defines the format string used for printing a Perl NV using %f-ish floating point format.

"NVgf"
    This symbol defines the format string used for printing a Perl NV using %g-ish floating point format.

"PERL_PRIeldbl"
    This symbol, if defined, contains the string used by stdio to format long doubles (format 'e') for output.

"PERL_PRIfldbl"
    This symbol, if defined, contains the string used by stdio to format long doubles (format 'f') for output.

"PERL_PRIgldbl"
    This symbol, if defined, contains the string used by stdio to format long doubles (format 'g') for output.

"PERL_SCNfldbl"
    This symbol, if defined, contains the string used by stdio to format long doubles (format 'f') for input.

"PRINTF_FORMAT_NULL_OK"
    Allows "__printf__" format to be null when checking printf-style

"SVf"
"SVf_QUOTEDPREFIX"
"SVfARG"
"UTF8f"
"UTF8f_QUOTEDPREFIX"
"UTF8fARG"
    Described in perlguts.

       SVfARG  (SV *sv)
       UTF8fARG(bool is_utf8, Size_t byte_len, char *str)

"UVf"
    "DEPRECATED!" It is planned to remove "UVf" from a future release of Perl. Do not use it for new code; remove it from existing code.

    Obsolete form of "UVuf", which you should convert to instead use

     const char *  UVf

"UVof"
    This symbol defines the format string used for printing a Perl UV as an unsigned octal integer.

"UVuf"
    This symbol defines the format string used for printing a Perl UV as an unsigned decimal integer.

"UVXf"
    This symbol defines the format string used for printing a Perl UV as an unsigned hexadecimal integer in uppercase "ABCDEF".

"UVxf"
    This symbol defines the format string used for printing a Perl UV as an unsigned hexadecimal integer in lowercase abcdef.

Lexer interface
This is the lower layer of the Perl parser, managing characters and tokens.

"BHK"
    Described in perlguts.

"lex_bufutf8"
    NOTE: "lex_bufutf8" is experimental and may change or be removed without notice.

    Indicates whether the octets in the lexer buffer ("PL_parser->linestr") should be interpreted as the UTF-8 encoding of Unicode characters. If not, they should be interpreted as Latin-1 characters. This is analogous to the "SvUTF8" flag for scalars.

    In UTF-8 mode, it is not guaranteed that the lexer buffer actually contains valid UTF-8. Lexing code must be robust in the face of invalid encoding.

    The actual "SvUTF8" flag of the "PL_parser->linestr" scalar is significant, but not the whole story regarding the input character encoding. Normally, when a file is being read, the scalar contains octets and its "SvUTF8" flag is off, but the octets should be interpreted as UTF-8 if the "use utf8" pragma is in effect. During a string eval, however, the scalar may have the "SvUTF8" flag on, and in this case its octets should be interpreted as UTF-8 unless the "use bytes" pragma is in effect. This logic may change in the future; use this function instead of implementing the logic yourself.

     bool       lex_bufutf8()
     bool  Perl_lex_bufutf8(pTHX)

"lex_discard_to"
    NOTE: "lex_discard_to" is experimental and may change or be removed without notice.

    Discards the first part of the "PL_parser->linestr" buffer, up to "ptr". The remaining content of the buffer will be moved, and all pointers into the buffer updated appropriately. "ptr" must not be later in the buffer than the position of "PL_parser->bufptr": it is not permitted to discard text that has yet to be lexed.

    Normally it is not necessarily to do this directly, because it suffices to use the implicit discarding behaviour of "lex_next_chunk" and things based on it. However, if a token stretches across multiple lines, and the lexing code has kept multiple lines of text in the buffer for that purpose, then after completion of the token it would be wise to explicitly discard the now-unneeded earlier lines, to avoid future multi-line tokens growing the buffer without bound.

     void       lex_discard_to(      char *ptr)
     void  Perl_lex_discard_to(pTHX_ char *ptr)

"lex_grow_linestr"
    NOTE: "lex_grow_linestr" is experimental and may change or be removed without notice.

    Reallocates the lexer buffer ("PL_parser->linestr") to accommodate at least "len" octets (including terminating "NUL"). Returns a pointer to the reallocated buffer. This is necessary before making any direct modification of the buffer that would increase its length. "lex_stuff_pvn" provides a more convenient way to insert text into the buffer.

    Do not use "SvGROW" or "sv_grow" directly on "PL_parser->linestr"; this function updates all of the lexer's variables that point directly into the buffer.

     char *       lex_grow_linestr(      STRLEN len)
     char *  Perl_lex_grow_linestr(pTHX_ STRLEN len)

"lex_next_chunk"
    NOTE: "lex_next_chunk" is experimental and may change or be removed without notice.

    Reads in the next chunk of text to be lexed, appending it to "PL_parser->linestr". This should be called when lexing code has looked to the end of the current chunk and wants to know more. It is usual, but not necessary, for lexing to have consumed the entirety of the current chunk at this time.

    If "PL_parser->bufptr" is pointing to the very end of the current chunk (i.e., the current chunk has been entirely consumed), normally the current chunk will be discarded at the same time that the new chunk is read in. If "flags" has the "LEX_KEEP_PREVIOUS" bit set, the current chunk will not be discarded. If the current chunk has not been entirely consumed, then it will not be discarded regardless of the flag.

    Returns true if some new text was added to the buffer, or false if the buffer has reached the end of the input text.

     bool       lex_next_chunk(      U32 flags)
     bool  Perl_lex_next_chunk(pTHX_ U32 flags)

"lex_peek_unichar"
    NOTE: "lex_peek_unichar" is experimental and may change or be removed without notice.

    Looks ahead one (Unicode) character in the text currently being lexed. Returns the codepoint (unsigned integer value) of the next character, or -1 if lexing has reached the end of the input text. To consume the peeked character, use "lex_read_unichar".

    If the next character is in (or extends into) the next chunk of input text, the next chunk will be read in. Normally the current chunk will be discarded at the same time, but if "flags" has the "LEX_KEEP_PREVIOUS" bit set, then the current chunk will not be discarded.

    If the input is being interpreted as UTF-8 and a UTF-8 encoding error is encountered, an exception is generated.

     I32       lex_peek_unichar(      U32 flags)
     I32  Perl_lex_peek_unichar(pTHX_ U32 flags)

"lex_read_space"
    NOTE: "lex_read_space" is experimental and may change or be removed without notice.

    Reads optional spaces, in Perl style, in the text currently being lexed. The spaces may include ordinary whitespace characters and Perl-style comments. "#line" directives are processed if encountered. "PL_parser->bufptr" is moved past the spaces, so that it points at a non-space character (or the end of the input text).

    If spaces extend into the next chunk of input text, the next chunk will be read in. Normally the current chunk will be discarded at the same time, but if "flags" has the "LEX_KEEP_PREVIOUS" bit set, then the current chunk will not be discarded.

     void       lex_read_space(      U32 flags)
     void  Perl_lex_read_space(pTHX_ U32 flags)

"lex_read_to"
    NOTE: "lex_read_to" is experimental and may change or be removed without notice.

    Consume text in the lexer buffer, from "PL_parser->bufptr" up to "ptr". This advances "PL_parser->bufptr" to match "ptr", performing the correct bookkeeping whenever a newline character is passed. This is the normal way to consume lexed text.

    Interpretation of the buffer's octets can be abstracted out by using the slightly higher-level functions "lex_peek_unichar" and "lex_read_unichar".

     void       lex_read_to(      char *ptr)
     void  Perl_lex_read_to(pTHX_ char *ptr)

"lex_read_unichar"
    NOTE: "lex_read_unichar" is experimental and may change or be removed without notice.

    Reads the next (Unicode) character in the text currently being lexed. Returns the codepoint (unsigned integer value) of the character read, and moves "PL_parser->bufptr" past the character, or returns -1 if lexing has reached the end of the input text. To non-destructively examine the next character, use "lex_peek_unichar" instead.

    If the next character is in (or extends into) the next chunk of input text, the next chunk will be read in. Normally the current chunk will be discarded at the same time, but if "flags" has the "LEX_KEEP_PREVIOUS" bit set, then the current chunk will not be discarded.

    If the input is being interpreted as UTF-8 and a UTF-8 encoding error is encountered, an exception is generated.

     I32       lex_read_unichar(      U32 flags)
     I32  Perl_lex_read_unichar(pTHX_ U32 flags)

"lex_start"
    NOTE: "lex_start" is experimental and may change or be removed without notice.

    Creates and initialises a new lexer/parser state object, supplying a context in which to lex and parse from a new source of Perl code. A pointer to the new state object is placed in "PL_parser". An entry is made on the save stack so that upon unwinding, the new state object will be destroyed and the former value of "PL_parser" will be restored. Nothing else need be done to clean up the parsing context.

    The code to be parsed comes from "line" and "rsfp". "line", if non-null, provides a string (in SV form) containing code to be parsed. A copy of the string is made, so subsequent modification of "line" does not affect parsing. "rsfp", if non-null, provides an input stream from which code will be read to be parsed. If both are non-null, the code in "line" comes first and must consist of complete lines of input, and "rsfp" supplies the remainder of the source.

    The "flags" parameter is reserved for future use. Currently it is only used by perl internally, so extensions should always pass zero.

     void       lex_start(      SV *line, PerlIO *rsfp, U32 flags)
     void  Perl_lex_start(pTHX_ SV *line, PerlIO *rsfp, U32 flags)

"lex_stuff_pv"
"lex_stuff_pvn"
"lex_stuff_pvs"
"lex_stuff_sv"
    NOTE: all these forms are experimental and may change or be removed without notice.

    These each insert characters into the lexer buffer ("PL_parser->linestr"), immediately after the current lexing point ("PL_parser->bufptr"), reallocating the buffer if necessary. This means that lexing code that runs later will see the characters as if they had appeared in the input. It is not recommended to do this as part of normal parsing, and most uses of this facility run the risk of the inserted characters being interpreted in an unintended manner.

    In "lex_stuff_pvs", the string to be inserted is a literal C string, enclosed in double quotes.

    In "lex_stuff_pv" and "lex_stuff_pvn", the string to be inserted is represented by the octets starting at "pv". In "lex_stuff_pv", the first NUL octet terminates the string. In "lex_stuff_pvn", "len" octets will be used, hence the string may contain embedded NUL characters.

    In all three cases, these octets are interpreted as either UTF-8 or Latin-1, according to whether or not the "LEX_STUFF_UTF8" flag is set in "flags".

    In "lex_stuff_sv", the string to be inserted is the string value of "sv". "flags" must be 0. The string is interpreted as either UTF-8 or Latin-1, according to whether or not "sv" has its UTF-8 flag set.

    In all three forms, the characters are recoded for the lexer buffer, according to how the buffer is currently being interpreted ("lex_bufutf8").

     void       lex_stuff_pv (      const char *pv, U32 flags)
     void  Perl_lex_stuff_pv (pTHX_ const char *pv, U32 flags)
     void       lex_stuff_pvn(      const char *pv, STRLEN len,
                                    U32 flags)
     void  Perl_lex_stuff_pvn(pTHX_ const char *pv, STRLEN len,
                                    U32 flags)
     void       lex_stuff_pvs(      "pv", U32 flags)
     void       lex_stuff_sv (      SV *sv, U32 flags)
     void  Perl_lex_stuff_sv (pTHX_ SV *sv, U32 flags)

"lex_unstuff"
    NOTE: "lex_unstuff" is experimental and may change or be removed without notice.

    Discards text about to be lexed, from "PL_parser->bufptr" up to "ptr". Text following "ptr" will be moved, and the buffer shortened. This hides the discarded text from any lexing code that runs later, as if the text had never appeared.

    This is not the normal way to consume lexed text. For that, use "lex_read_to".

     void       lex_unstuff(      char *ptr)
     void  Perl_lex_unstuff(pTHX_ char *ptr)

"parse_arithexpr"
    NOTE: "parse_arithexpr" is experimental and may change or be removed without notice.

    Parse a Perl arithmetic expression. This may contain operators of precedence down to the bit shift operators. The expression must be followed (and thus terminated) either by a comparison or lower-precedence operator or by something that would normally terminate an expression such as semicolon. If "flags" has the "PARSE_OPTIONAL" bit set, then the expression is optional, otherwise it is mandatory. It is up to the caller to ensure that the dynamic parser state ("PL_parser" et al) is correctly set to reflect the source of the code to be parsed and the lexical context for the expression.

    The op tree representing the expression is returned. If an optional expression is absent, a null pointer is returned, otherwise the pointer will be non-null.

    If an error occurs in parsing or compilation, in most cases a valid op tree is returned anyway. The error is reflected in the parser state, normally resulting in a single exception at the top level of parsing which covers all the compilation errors that occurred. Some compilation errors, however, will throw an exception immediately.

     OP *       parse_arithexpr(      U32 flags)
     OP *  Perl_parse_arithexpr(pTHX_ U32 flags)

"parse_barestmt"
    NOTE: "parse_barestmt" is experimental and may change or be removed without notice.

    Parse a single unadorned Perl statement. This may be a normal imperative statement or a declaration that has compile-time effect. It does not include any label or other affixture. It is up to the caller to ensure that the dynamic parser state ("PL_parser" et al) is correctly set to reflect the source of the code to be parsed and the lexical context for the statement.

    The op tree representing the statement is returned. This may be a null pointer if the statement is null, for example if it was actually a subroutine definition (which has compile-time side effects). If not null, it will be ops directly implementing the statement, suitable to pass to "newSTATEOP". It will not normally include a "nextstate" or equivalent op (except for those embedded in a scope contained entirely within the statement).

    If an error occurs in parsing or compilation, in most cases a valid op tree (most likely null) is returned anyway. The error is reflected in the parser state, normally resulting in a single exception at the top level of parsing which covers all the compilation errors that occurred. Some compilation errors, however, will throw an exception immediately.

    The "flags" parameter is reserved for future use, and must always be zero.

     OP *       parse_barestmt(      U32 flags)
     OP *  Perl_parse_barestmt(pTHX_ U32 flags)

"parse_block"
    NOTE: "parse_block" is experimental and may change or be removed without notice.

    Parse a single complete Perl code block. This consists of an opening brace, a sequence of statements, and a closing brace. The block constitutes a lexical scope, so "my" variables and various compile-time effects can be contained within it. It is up to the caller to ensure that the dynamic parser state ("PL_parser" et al) is correctly set to reflect the source of the code to be parsed and the lexical context for the statement.

    The op tree representing the code block is returned. This is always a real op, never a null pointer. It will normally be a "lineseq" list, including "nextstate" or equivalent ops. No ops to construct any kind of runtime scope are included by virtue of it being a block.

    If an error occurs in parsing or compilation, in most cases a valid op tree (most likely null) is returned anyway. The error is reflected in the parser state, normally resulting in a single exception at the top level of parsing which covers all the compilation errors that occurred. Some compilation errors, however, will throw an exception immediately.

    The "flags" parameter is reserved for future use, and must always be zero.

     OP *       parse_block(      U32 flags)
     OP *  Perl_parse_block(pTHX_ U32 flags)

"parse_fullexpr"
    NOTE: "parse_fullexpr" is experimental and may change or be removed without notice.

    Parse a single complete Perl expression. This allows the full expression grammar, including the lowest-precedence operators such as "or". The expression must be followed (and thus terminated) by a token that an expression would normally be terminated by: end-of-file, closing bracketing punctuation, semicolon, or one of the keywords that signals a postfix expression-statement modifier. If "flags" has the "PARSE_OPTIONAL" bit set, then the expression is optional, otherwise it is mandatory. It is up to the caller to ensure that the dynamic parser state ("PL_parser" et al) is correctly set to reflect the source of the code to be parsed and the lexical context for the expression.

    The op tree representing the expression is returned. If an optional expression is absent, a null pointer is returned, otherwise the pointer will be non-null.

    If an error occurs in parsing or compilation, in most cases a valid op tree is returned anyway. The error is reflected in the parser state, normally resulting in a single exception at the top level of parsing which covers all the compilation errors that occurred. Some compilation errors, however, will throw an exception immediately.

     OP *       parse_fullexpr(      U32 flags)
     OP *  Perl_parse_fullexpr(pTHX_ U32 flags)

"parse_fullstmt"
    NOTE: "parse_fullstmt" is experimental and may change or be removed without notice.

    Parse a single complete Perl statement. This may be a normal imperative statement or a declaration that has compile-time effect, and may include optional labels. It is up to the caller to ensure that the dynamic parser state ("PL_parser" et al) is correctly set to reflect the source of the code to be parsed and the lexical context for the statement.

    The op tree representing the statement is returned. This may be a null pointer if the statement is null, for example if it was actually a subroutine definition (which has compile-time side effects). If not null, it will be the result of a "newSTATEOP" call, normally including a "nextstate" or equivalent op.

    If an error occurs in parsing or compilation, in most cases a valid op tree (most likely null) is returned anyway. The error is reflected in the parser state, normally resulting in a single exception at the top level of parsing which covers all the compilation errors that occurred. Some compilation errors, however, will throw an exception immediately.

    The "flags" parameter is reserved for future use, and must always be zero.

     OP *       parse_fullstmt(      U32 flags)
     OP *  Perl_parse_fullstmt(pTHX_ U32 flags)

"parse_label"
    NOTE: "parse_label" is experimental and may change or be removed without notice.

    Parse a single label, possibly optional, of the type that may prefix a Perl statement. It is up to the caller to ensure that the dynamic parser state ("PL_parser" et al) is correctly set to reflect the source of the code to be parsed. If "flags" has the "PARSE_OPTIONAL" bit set, then the label is optional, otherwise it is mandatory.

    The name of the label is returned in the form of a fresh scalar. If an optional label is absent, a null pointer is returned.

    If an error occurs in parsing, which can only occur if the label is mandatory, a valid label is returned anyway. The error is reflected in the parser state, normally resulting in a single exception at the top level of parsing which covers all the compilation errors that occurred.

     SV *       parse_label(      U32 flags)
     SV *  Perl_parse_label(pTHX_ U32 flags)

"parse_listexpr"
    NOTE: "parse_listexpr" is experimental and may change or be removed without notice.

    Parse a Perl list expression. This may contain operators of precedence down to the comma operator. The expression must be followed (and thus terminated) either by a low-precedence logic operator such as "or" or by something that would normally terminate an expression such as semicolon. If "flags" has the "PARSE_OPTIONAL" bit set, then the expression is optional, otherwise it is mandatory. It is up to the caller to ensure that the dynamic parser state ("PL_parser" et al) is correctly set to reflect the source of the code to be parsed and the lexical context for the expression.

    The op tree representing the expression is returned. If an optional expression is absent, a null pointer is returned, otherwise the pointer will be non-null.

    If an error occurs in parsing or compilation, in most cases a valid op tree is returned anyway. The error is reflected in the parser state, normally resulting in a single exception at the top level of parsing which covers all the compilation errors that occurred. Some compilation errors, however, will throw an exception immediately.

     OP *       parse_listexpr(      U32 flags)
     OP *  Perl_parse_listexpr(pTHX_ U32 flags)

"parse_stmtseq"
    NOTE: "parse_stmtseq" is experimental and may change or be removed without notice.

    Parse a sequence of zero or more Perl statements. These may be normal imperative statements, including optional labels, or declarations that have compile-time effect, or any mixture thereof. The statement sequence ends when a closing brace or end-of-file is encountered in a place where a new statement could have validly started. It is up to the caller to ensure that the dynamic parser state ("PL_parser" et al) is correctly set to reflect the source of the code to be parsed and the lexical context for the statements.

    The op tree representing the statement sequence is returned. This may be a null pointer if the statements were all null, for example if there were no statements or if there were only subroutine definitions (which have compile-time side effects). If not null, it will be a "lineseq" list, normally including "nextstate" or equivalent ops.

    If an error occurs in parsing or compilation, in most cases a valid op tree is returned anyway. The error is reflected in the parser state, normally resulting in a single exception at the top level of parsing which covers all the compilation errors that occurred. Some compilation errors, however, will throw an exception immediately.

    The "flags" parameter is reserved for future use, and must always be zero.

     OP *       parse_stmtseq(      U32 flags)
     OP *  Perl_parse_stmtseq(pTHX_ U32 flags)

"parse_subsignature"
    NOTE: "parse_subsignature" is experimental and may change or be removed without notice.

    Parse a subroutine signature declaration. This is the contents of the parentheses following a named or anonymous subroutine declaration when the "signatures" feature is enabled. Note that this function neither expects nor consumes the opening and closing parentheses around the signature; it is the caller's job to handle these.

    This function must only be called during parsing of a subroutine; after "start_subparse" has been called. It might allocate lexical variables on the pad for the current subroutine.

    The op tree to unpack the arguments from the stack at runtime is returned. This op tree should appear at the beginning of the compiled function. The caller may wish to use "op_append_list" to build their function body after it, or splice it together with the body before calling "newATTRSUB".

    The "flags" parameter is reserved for future use, and must always be zero.

     OP *       parse_subsignature(      U32 flags)
     OP *  Perl_parse_subsignature(pTHX_ U32 flags)

"parse_termexpr"
    NOTE: "parse_termexpr" is experimental and may change or be removed without notice.

    Parse a Perl term expression. This may contain operators of precedence down to the assignment operators. The expression must be followed (and thus terminated) either by a comma or lower-precedence operator or by something that would normally terminate an expression such as semicolon. If "flags" has the "PARSE_OPTIONAL" bit set, then the expression is optional, otherwise it is mandatory. It is up to the caller to ensure that the dynamic parser state ("PL_parser" et al) is correctly set to reflect the source of the code to be parsed and the lexical context for the expression.

    The op tree representing the expression is returned. If an optional expression is absent, a null pointer is returned, otherwise the pointer will be non-null.

    If an error occurs in parsing or compilation, in most cases a valid op tree is returned anyway. The error is reflected in the parser state, normally resulting in a single exception at the top level of parsing which covers all the compilation errors that occurred. Some compilation errors, however, will throw an exception immediately.

     OP *       parse_termexpr(      U32 flags)
     OP *  Perl_parse_termexpr(pTHX_ U32 flags)

"PL_parser"
    Pointer to a structure encapsulating the state of the parsing operation currently in progress. The pointer can be locally changed to perform a nested parse without interfering with the state of an outer parse. Individual members of "PL_parser" have their own documentation.

"PL_parser->bufend"
    NOTE: "PL_parser->bufend" is experimental and may change or be removed without notice.

    Direct pointer to the end of the chunk of text currently being lexed, the end of the lexer buffer. This is equal to "SvPVX(PL_parser->linestr) + SvCUR(PL_parser->linestr)". A "NUL" character (zero octet) is always located at the end of the buffer, and does not count as part of the buffer's contents.

"PL_parser->bufptr"
    NOTE: "PL_parser->bufptr" is experimental and may change or be removed without notice.

    Points to the current position of lexing inside the lexer buffer. Characters around this point may be freely examined, within the range delimited by SvPVX("PL_parser->linestr") and "PL_parser->bufend". The octets of the buffer may be intended to be interpreted as either UTF-8 or Latin-1, as indicated by "lex_bufutf8".

    Lexing code (whether in the Perl core or not) moves this pointer past the characters that it consumes. It is also expected to perform some bookkeeping whenever a newline character is consumed. This movement can be more conveniently performed by the function "lex_read_to", which handles newlines appropriately.

    Interpretation of the buffer's octets can be abstracted out by using the slightly higher-level functions "lex_peek_unichar" and "lex_read_unichar".

"PL_parser->linestart"
    NOTE: "PL_parser->linestart" is experimental and may change or be removed without notice.

    Points to the start of the current line inside the lexer buffer. This is useful for indicating at which column an error occurred, and not much else. This must be updated by any lexing code that consumes a newline; the function "lex_read_to" handles this detail.

"PL_parser->linestr"
    NOTE: "PL_parser->linestr" is experimental and may change or be removed without notice.

    Buffer scalar containing the chunk currently under consideration of the text currently being lexed. This is always a plain string scalar (for which "SvPOK" is true). It is not intended to be used as a scalar by normal scalar means; instead refer to the buffer directly by the pointer variables described below.

    The lexer maintains various "char*" pointers to things in the "PL_parser->linestr" buffer. If "PL_parser->linestr" is ever reallocated, all of these pointers must be updated. Don't attempt to do this manually, but rather use "lex_grow_linestr" if you need to reallocate the buffer.

    The content of the text chunk in the buffer is commonly exactly one complete line of input, up to and including a newline terminator, but there are situations where it is otherwise. The octets of the buffer may be intended to be interpreted as either UTF-8 or Latin-1. The function "lex_bufutf8" tells you which. Do not use the "SvUTF8" flag on this scalar, which may disagree with it.

    For direct examination of the buffer, the variable "PL_parser->bufend" points to the end of the buffer. The current lexing position is pointed to by "PL_parser->bufptr". Direct use of these pointers is usually preferable to examination of the scalar through normal scalar means.

"resume_compcv_and_save"
    Resumes a buffer previously suspended by the "suspend_compcv" function, in a way that will be re-suspended at the end of the scope so it can be used again later. This should be used within an "ENTER"/"LEAVE" scoped pair.

     void  resume_compcv_and_save(struct suspended_compcv *buffer)

"resume_compcv_final"
    Resumes the parser state previously saved using the "suspend_compcv" function for a final time before being compiled into a full CV. This should be used within an "ENTER"/"LEAVE" scoped pair.

     void  resume_compcv_final(struct suspended_compcv *buffer)

"suspend_compcv"
    Implements part of the concept of a "suspended compilation CV", which can be used to pause the parser and compiler during parsing a CV in order to come back to it later on.

    This function saves the current state of the subroutine under compilation ("PL_compcv") into the supplied buffer. This should be used initially to create the state in the buffer, as the final thing before a "LEAVE" within a block.

        ENTER;
        start_subparse(0);
        ...

        suspend_compcv(&buffer);
        LEAVE;

    Once suspended, the "resume_compcv_final" or "resume_compcv_and_save" function can later be used to continue the parsing from the point this stopped.

     void       suspend_compcv(      struct suspended_compcv *buffer)
     void  Perl_suspend_compcv(pTHX_ struct suspended_compcv *buffer)

"valid_identifier_pve"
    Returns true if the string given by "s" until "end" would be considered valid as a Perl identifier. That is, it must begin with a character matching "isIDFIRST", followed by characters all matching "isIDCONT". An empty string (i.e. when "end" is "s") will return false.

    If "flags" contains the "SVf_UTF8" bit, then the string is presumed to be encoded in UTF-8, and suitable Unicode character test functions will be used.

     bool       valid_identifier_pve(      const char *s,
                                           const char *end, U32 flags)
     bool  Perl_valid_identifier_pve(pTHX_ const char *s,
                                           const char *end, U32 flags)

"valid_identifier_pvn"
    Returns true if the string given by "s" whose length is "len" would be considered valid as a Perl identifier. That is, it must begin with a character matching "isIDFIRST", followed by characters all matching "isIDCONT". An empty string (i.e. when "len" is zero) will return false.

    If "flags" contains the "SVf_UTF8" bit, then the string is presumed to be encoded in UTF-8, and suitable Unicode character test functions will be used.

     bool       valid_identifier_pvn(      const char *s, STRLEN len,
                                           U32 flags)
     bool  Perl_valid_identifier_pvn(pTHX_ const char *s, STRLEN len,
                                           U32 flags)

"valid_identifier_sv"
    Returns true if the given SV contains a non-empty string whose characters match accoding to "valid_identifier_pvn". Returns false if given NULL, an undefined SV, or a SV that does not contain a non-empty string.

    Does not invoke "get" magic on the SV beforehand.

     bool       valid_identifier_sv(      SV *sv)
     bool  Perl_valid_identifier_sv(pTHX_ SV *sv)

"wrap_infix_plugin"
    NOTE: "wrap_infix_plugin" is experimental and may change or be removed without notice.

    NOTE: This API exists entirely for the purpose of making the CPAN module "XS::Parse::Infix" work. It is not expected that additional modules will make use of it; rather, that they should use "XS::Parse::Infix" to provide parsing of new infix operators.

    Puts a C function into the chain of infix plugins. This is the preferred way to manipulate the "PL_infix_plugin" variable. "new_plugin" is a pointer to the C function that is to be added to the infix plugin chain, and "old_plugin_p" points to a storage location where a pointer to the next function in the chain will be stored. The value of "new_plugin" is written into the "PL_infix_plugin" variable, while the value previously stored there is written to *old_plugin_p.

    Direct access to "PL_infix_plugin" should be avoided.

     void       wrap_infix_plugin(  Perl_infix_plugin_t new_plugin,
                                    Perl_infix_plugin_t *old_plugin_p)
     void  Perl_wrap_infix_plugin(pTHX_
                                    Perl_infix_plugin_t new_plugin,
                                    Perl_infix_plugin_t *old_plugin_p)

"wrap_keyword_plugin"
    NOTE: "wrap_keyword_plugin" is experimental and may change or be removed without notice.

    Puts a C function into the chain of keyword plugins. This is the preferred way to manipulate the "PL_keyword_plugin" variable. "new_plugin" is a pointer to the C function that is to be added to the keyword plugin chain, and "old_plugin_p" points to the storage location where a pointer to the next function in the chain will be stored. The value of "new_plugin" is written into the "PL_keyword_plugin" variable, while the value previously stored there is written to *old_plugin_p.

    "PL_keyword_plugin" is global to an entire process, and a module wishing to hook keyword parsing may find itself invoked more than once per process, typically in different threads. To handle that situation, this function is idempotent. The location *old_plugin_p must initially (once per process) contain a null pointer. A C variable of static duration (declared at file scope, typically also marked "static" to give it internal linkage) will be implicitly initialised appropriately, if it does not have an explicit initialiser. This function will only actually modify the plugin chain if it finds *old_plugin_p to be null. This function is also thread safe on the small scale. It uses appropriate locking to avoid race conditions in accessing "PL_keyword_plugin".

    When this function is called, the function referenced by "new_plugin" must be ready to be called, except for *old_plugin_p being unfilled. In a threading situation, "new_plugin" may be called immediately, even before this function has returned. *old_plugin_p will always be appropriately set before "new_plugin" is called. If "new_plugin" decides not to do anything special with the identifier that it is given (which is the usual case for most calls to a keyword plugin), it must chain the plugin function referenced by *old_plugin_p.

    Taken all together, XS code to install a keyword plugin should typically look something like this:

        static Perl_keyword_plugin_t next_keyword_plugin;
        static OP *my_keyword_plugin(pTHX_
            char *keyword_ptr, STRLEN keyword_len, OP **op_ptr)
        {
            if (memEQs(keyword_ptr, keyword_len,
                       "my_new_keyword")) {
                ...
            } else {
                return next_keyword_plugin(aTHX_
                    keyword_ptr, keyword_len, op_ptr);
            }
        }
        BOOT:
            wrap_keyword_plugin(my_keyword_plugin,
                                &next_keyword_plugin);

    Direct access to "PL_keyword_plugin" should be avoided.

     void       wrap_keyword_plugin(Perl_keyword_plugin_t new_plugin,
                                  Perl_keyword_plugin_t *old_plugin_p)
     void  Perl_wrap_keyword_plugin(pTHX_
                                  Perl_keyword_plugin_t new_plugin,
                                  Perl_keyword_plugin_t *old_plugin_p)

Locales

"DECLARATION_FOR_LC_NUMERIC_MANIPULATION"
    This macro should be used as a statement. It declares a private variable (whose name begins with an underscore) that is needed by the other macros in this section. Failing to include this correctly should lead to a syntax error. For compatibility with C89 C compilers it should be placed in a block before any executable statements.

     void  DECLARATION_FOR_LC_NUMERIC_MANIPULATION

"HAS_DUPLOCALE"
    This symbol, if defined, indicates that the "duplocale" routine is available to duplicate a locale object.

"HAS_FREELOCALE"
    This symbol, if defined, indicates that the "freelocale" routine is available to deallocates the resources associated with a locale object.

"HAS_LC_MONETARY_2008"
    This symbol, if defined, indicates that the localeconv routine is available and has the additional members added in "POSIX" 1003.1-2008.

"HAS_LOCALECONV"
    This symbol, if defined, indicates that the "localeconv" routine is available for numeric and monetary formatting conventions.

"HAS_LOCALECONV_L"
    This symbol, if defined, indicates that the "localeconv_l" routine is available to query certain information about a locale.

"HAS_NEWLOCALE"
    This symbol, if defined, indicates that the "newlocale" routine is available to return a new locale object or modify an existing locale object.

"HAS_NL_LANGINFO"
    This symbol, if defined, indicates that the "nl_langinfo" routine is available to return locale data. You will also need langinfo.h and therefore "I_LANGINFO".

"HAS_NL_LANGINFO_L"
    This symbol, if defined, indicates that the "nl_langinfo_l" routine is available to return locale data. You will also need langinfo.h and therefore "I_LANGINFO".

"HAS_QUERYLOCALE"
    This symbol, if defined, indicates that the "querylocale" routine is available to return the name of the locale for a category mask.

"HAS_SETLOCALE"
    This symbol, if defined, indicates that the "setlocale" routine is available to handle locale-specific ctype implementations.

"HAS_SETLOCALE_R"
    This symbol, if defined, indicates that the "setlocale_r" routine is available to setlocale re-entrantly.

"HAS_USELOCALE"
    This symbol, if defined, indicates that the "uselocale" routine is available to set the current locale for the calling thread.

"I_LANGINFO"
    This symbol, if defined, indicates that langinfo.h exists and should be included.

     #ifdef I_LANGINFO
         #include <langinfo.h>
     #endif

"I_LOCALE"
    This symbol, if defined, indicates to the C program that it should include locale.h.

     #ifdef I_LOCALE
         #include <locale.h>
     #endif

"I_XLOCALE"
    This symbol, if defined, indicates to the C program that the header xlocale.h is available. See also "NEED_XLOCALE_H"

     #ifdef I_XLOCALE
         #include <xlocale.h>
     #endif

"IN_LOCALE"
    Evaluates to TRUE if the plain locale pragma without a parameter ("use locale") is in effect.

     bool  IN_LOCALE

"IN_LOCALE_COMPILETIME"
    Evaluates to TRUE if, when compiling a perl program (including an "eval") if the plain locale pragma without a parameter ("use locale") is in effect.

     bool  IN_LOCALE_COMPILETIME

"IN_LOCALE_RUNTIME"
    Evaluates to TRUE if, when executing a perl program (including an "eval") if the plain locale pragma without a parameter ("use locale") is in effect.

     bool  IN_LOCALE_RUNTIME

"NEED_XLOCALE_H"
    This symbol, if defined, indicates that the C program should include xlocale.h to get newlocale() and its friends.

"Perl_langinfo*"
"Perl_langinfo8*"
    Described under "sv_langinfo"

"PERL_LC_ALL_CATEGORY_POSITIONS_INIT"
    This symbol, when defined, gives the C initializer for an array whose element [0] is the first category in the string returned by "setlocale(LC_ALL, NULL)" when not all categories are the same, on systems that use a positional notation. After element [0] is "LC_ALL_SEPARATOR", then the category given by element [1] and so on.

"PERL_LC_ALL_SEPARATOR"
    This symbol, if defined, gives the string returned by "setlocale(LC_ALL, NULL)" to separate categories that are in different locales on systems that use a positional notation as opposed to 'name=value' pairs. An example on some platforms could be the '/' in "C/"de_DE"/C/"en_UK"/C/C"

"PERL_LC_ALL_USES_NAME_VALUE_PAIRS"
    This symbol, if defined, indicates to the C program that the string returned by "setlocale(LC_ALL, NULL)" uses 'name=value;' pairs to indicate what each category's locale is when they aren't all set to the same locale. For example, ""LC_NUMERIC"=C;"LC_CTYPE"="de_DE";..." When not defined, the system uses positional notation.

"Perl_localeconv"
    This is a thread-safe version of the libc localeconv(3). It is the same as POSIX::localeconv (returning a hash of the localeconv() fields), but directly callable from XS code. The hash is mortalized, so must be dealt with immediately.

     HV *  Perl_localeconv(pTHX)

"Perl_setlocale"
    This is an (almost) drop-in replacement for the system "setlocale(3)", taking the same parameters, and returning the same information, except that it returns the correct underlying "LC_NUMERIC" locale. Regular "setlocale" will instead return "C" if the underlying locale has a non-dot decimal point character, or a non-empty thousands separator for displaying floating point numbers. This is because perl keeps that locale category such that it has a dot and empty separator, changing the locale briefly during the operations where the underlying one is required. "Perl_setlocale" knows about this, and compensates; regular "setlocale" doesn't.

    Another reason it isn't completely a drop-in replacement is that it is declared to return "const char *", whereas the system setlocale omits the "const" (presumably because its API was specified long ago, and can't be updated; it is illegal to change the information "setlocale" returns; doing so leads to segfaults.)

    Finally, "Perl_setlocale" works under all circumstances, whereas plain "setlocale" can be completely ineffective on some platforms under some configurations.

    Changing the locale is not a good idea when more than one thread is running, except on systems where the predefined variable "${^SAFE_LOCALES}" is non-zero. This is because on such systems the locale is global to the whole process and not local to just the thread calling the function. So changing it in one thread instantaneously changes it in all. On some such systems, the system setlocale() is ineffective, returning the wrong information, and failing to actually change the locale. z/OS refuses to try to change the locale once a second thread is created. "Perl_setlocale", should give you accurate results of what actually happened on these problematic platforms, returning NULL if the system forbade the locale change.

    The return points to a per-thread static buffer, which is overwritten the next time "Perl_setlocale" is called from the same thread.

     const char *  Perl_setlocale(const int category,
                                  const char *locale)

"RESTORE_LC_NUMERIC"
    This is used in conjunction with one of the macros "STORE_LC_NUMERIC_SET_TO_NEEDED" and "STORE_LC_NUMERIC_FORCE_TO_UNDERLYING" to properly restore the "LC_NUMERIC" state.

    A call to "DECLARATION_FOR_LC_NUMERIC_MANIPULATION" must have been made to declare at compile time a private variable used by this macro and the two "STORE" ones. This macro should be called as a single statement, not an expression, but with an empty argument list, like this:

     {
        DECLARATION_FOR_LC_NUMERIC_MANIPULATION;
         ...
        RESTORE_LC_NUMERIC();
         ...
     }

     void  RESTORE_LC_NUMERIC()

"SETLOCALE_ACCEPTS_ANY_LOCALE_NAME"
    This symbol, if defined, indicates that the setlocale routine is available and it accepts any input locale name as valid.

"STORE_LC_NUMERIC_FORCE_TO_UNDERLYING"
    This is used by XS code that is "LC_NUMERIC" locale-aware to force the locale for category "LC_NUMERIC" to be what perl thinks is the current underlying locale. (The perl interpreter could be wrong about what the underlying locale actually is if some C or XS code has called the C library function setlocale(3) behind its back; calling "sync_locale" before calling this macro will update perl's records.)

    A call to "DECLARATION_FOR_LC_NUMERIC_MANIPULATION" must have been made to declare at compile time a private variable used by this macro. This macro should be called as a single statement, not an expression, but with an empty argument list, like this:

     {
        DECLARATION_FOR_LC_NUMERIC_MANIPULATION;
         ...
        STORE_LC_NUMERIC_FORCE_TO_UNDERLYING();
         ...
        RESTORE_LC_NUMERIC();
         ...
     }

    The private variable is used to save the current locale state, so that the requisite matching call to "RESTORE_LC_NUMERIC" can restore it.

    On threaded perls not operating with thread-safe functionality, this macro uses a mutex to force a critical section. Therefore the matching RESTORE should be close by, and guaranteed to be called.

     void  STORE_LC_NUMERIC_FORCE_TO_UNDERLYING()

"STORE_LC_NUMERIC_SET_TO_NEEDED"
    This is used to help wrap XS or C code that is "LC_NUMERIC" locale-aware. This locale category is generally kept set to a locale where the decimal radix character is a dot, and the separator between groups of digits is empty. This is because most XS code that reads floating point numbers is expecting them to have this syntax.

    This macro makes sure the current "LC_NUMERIC" state is set properly, to be aware of locale if the call to the XS or C code from the Perl program is from within the scope of a "use locale"; or to ignore locale if the call is instead from outside such scope.

    This macro is the start of wrapping the C or XS code; the wrap ending is done by calling the "RESTORE_LC_NUMERIC" macro after the operation. Otherwise the state can be changed that will adversely affect other XS code.

    A call to "DECLARATION_FOR_LC_NUMERIC_MANIPULATION" must have been made to declare at compile time a private variable used by this macro. This macro should be called as a single statement, not an expression, but with an empty argument list, like this:

     {
        DECLARATION_FOR_LC_NUMERIC_MANIPULATION;
         ...
        STORE_LC_NUMERIC_SET_TO_NEEDED();
         ...
        RESTORE_LC_NUMERIC();
         ...
     }

    On threaded perls not operating with thread-safe functionality, this macro uses a mutex to force a critical section. Therefore the matching RESTORE should be close by, and guaranteed to be called; see "WITH_LC_NUMERIC_SET_TO_NEEDED" for a more contained way to ensure that.

     void  STORE_LC_NUMERIC_SET_TO_NEEDED()

"STORE_LC_NUMERIC_SET_TO_NEEDED_IN"
    Same as "STORE_LC_NUMERIC_SET_TO_NEEDED" with in_lc_numeric provided as the precalculated value of IN_LC(LC_NUMERIC). It is the caller's responsibility to ensure that the status of "PL_compiling" and "PL_hints" cannot have changed since the precalculation.

     void  STORE_LC_NUMERIC_SET_TO_NEEDED_IN(bool in_lc_numeric)

"sv_langinfo"
"Perl_langinfo"
"Perl_langinfo8"
    These perform the equivalent functionality as the system "nl_langinfo(3)", taking the same "item" parameter values, but are preferred over calling that directly because they are portable to platforms lacking that function, are thread-safe, and can automatically handle UTF-8 strings.

    The simplest to use is "sv_langinfo". It returns an SV containing the correct PV and UTF8ness, requiring no extra muss or fuss from you. New code should use this form.

    "Perl_langinfo" and "Perl_langinfo8" are retained for backwards compatibility. "Perl_langinfo" is an (almost) drop-in replacement for the system "nl_langinfo(3)", but exists on systems that lack a native "nl_langinfo".

    "Perl_langinfo8" is identical to "Perl_langinfo" except for an additional parameter, a pointer to a variable declared as "utf8ness_t", into which it returns to you how you should treat the returned string with regards to it being encoded in UTF-8 or not.

    "Perl_langinfo" and "Perl_langinfo8" share private per-thread memory that will be changed the next time either one of them is called with any input, but not before.

    Concerning the differences between these functions and plain nl_langinfo():

    a.  "Perl_langinfo8" has an extra parameter, described above. Besides this, the other reason they aren't quite a drop-in replacement is actually an advantage. The "const"ness of the return allows the compiler to catch attempts to write into the returned buffer, which is illegal and could cause run-time crashes.

    b.  They deliver the correct results for the "RADIXCHAR" and "THOUSEP" items, without you having to write extra code. The reason for the extra code would be because these are from the "LC_NUMERIC" locale category, which is normally kept set by Perl so that the radix is a dot, and the separator is the empty string, no matter what the underlying locale is supposed to be, and so to get the expected results, you have to temporarily toggle into the underlying locale, and later toggle back. (You could use plain "nl_langinfo" and "STORE_LC_NUMERIC_FORCE_TO_UNDERLYING" for this but then you wouldn't get the other advantages of Perl_langinfo(); not keeping "LC_NUMERIC" in the C (or equivalent) locale would break a lot of CPAN, which is expecting the radix (decimal point) character to be a dot.)

    c.  The system function they replace can have its static return buffer trashed, not only by a subsequent call to that function, but by a "freelocale", "setlocale", or other locale change. "sv_langinfo" sidesteps this problem entirely; the returned buffer of the other two is not changed until the next call to one or the other, so the buffer is never in a trashed state.

    d.  The return buffer of "Perl_langinfo" and "Perl_langinfo8" is per-thread so it also is never overwritten by a call to these functions from another thread; unlike the function they replace.

    e.  But most importantly, they work on systems that don't have "nl_langinfo", such as Windows, hence making your code more portable. Of the fifty-some possible items specified by the POSIX 2008 standard, <https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/langinfo.h.html>, only one is completely unimplemented, though on non-Windows platforms, another significant one is not fully implemented). They use various techniques to recover the other items, including calling "localeconv(3)", and "strftime(3)", both of which are specified in C89, so should be always be available. Later strftime() versions have additional capabilities. If an item is not available on your system, this returns either the value associated with the C locale, or simply "", whichever is more appropriate.

        It is important to note that, when called with an item that is recovered by using "localeconv", the buffer from any previous explicit call to "localeconv(3)" will be overwritten. But you shouldn't be using "localeconv" anyway because it is is very much not thread-safe, and suffers from the same problems outlined in item 'b.' above for the fields it returns that are controlled by the LC_NUMERIC locale category. Instead, avoid all of those problems by calling "Perl_localeconv", which is thread-safe; or by using the methods given in perlcall to call POSIX::localeconv(), which is also thread-safe.

    The details for those items which may deviate from what this emulation returns and what a native nl_langinfo() would return are specified in I18N::Langinfo.

     SV *               sv_langinfo   (      const nl_item item)
     SV *          Perl_sv_langinfo   (pTHX_ const nl_item item)
     const char *       Perl_langinfo (      const nl_item item)
     const char *       Perl_langinfo8(      const nl_item item,
                                             utf8ness_t *utf8ness)

"switch_to_global_locale"
    This function copies the locale state of the calling thread into the program's global locale, and converts the thread to use that global locale.

    It is intended so that Perl can safely be used with C libraries that access the global locale and which can't be converted to not access it. Effectively, this means libraries that call "setlocale(3)" on non-Windows systems. (For portability, it is a good idea to use it on Windows as well.)

    A downside of using it is that it disables the services that Perl provides to hide locale gotchas from your code. The service you most likely will miss regards the radix character (decimal point) in floating point numbers. Code executed after this function is called can no longer just assume that this character is correct for the current circumstances.

    To return to Perl control, and restart the gotcha prevention services, call "sync_locale". Behavior is undefined for any pure Perl code that executes while the switch is in effect.

    The global locale and the per-thread locales are independent. As long as just one thread converts to the global locale, everything works smoothly. But if more than one does, they can easily interfere with each other, and races are likely. On Windows systems prior to Visual Studio 15 (at which point Microsoft fixed a bug), races can occur (even if only one thread has been converted to the global locale), but only if you use the following operations:

    POSIX::localeconv
    I18N::Langinfo, items "CRNCYSTR" and "THOUSEP"
    "sv_langinfo" in perlapi, items "CRNCYSTR" and "THOUSEP"

    The first item is not fixable (except by upgrading to a later Visual Studio release), but it would be possible to work around the latter two items by having Perl change its algorithm for calculating these to use Windows API functions (likely "GetNumberFormat" and "GetCurrencyFormat"); patches welcome.

    XS code should never call plain "setlocale", but should instead be converted to either call "Perl_setlocale" (which is a drop-in for the system "setlocale") or use the methods given in perlcall to call "POSIX::setlocale". Either one will transparently properly handle all cases of single- vs multi-thread, POSIX 2008-supported or not.

     void       switch_to_global_locale()
     void  Perl_switch_to_global_locale(pTHX)

"sync_locale"
    This function copies the state of the program global locale into the calling thread, and converts that thread to using per-thread locales, if it wasn't already, and the platform supports them. The LC_NUMERIC locale is toggled into the standard state (using the C locale's conventions), if not within the lexical scope of "use locale".

    Perl will now consider itself to have control of the locale.

    Since unthreaded perls have only a global locale, this function is a no-op without threads.

    This function is intended for use with C libraries that do locale manipulation. It allows Perl to accommodate the use of them. Call this function before transferring back to Perl space so that it knows what state the C code has left things in.

    XS code should not manipulate the locale on its own. Instead, "Perl_setlocale" can be used at any time to query or change the locale (though changing the locale is antisocial and dangerous on multi-threaded systems that don't have multi-thread safe locale operations. (See "Multi-threaded operation" in perllocale).

    Using the libc "setlocale(3)" function should be avoided. Nevertheless, certain non-Perl libraries called from XS, do call it, and their behavior may not be able to be changed. This function, along with "switch_to_global_locale", can be used to get seamless behavior in these circumstances, as long as only one thread is involved.

    If the library has an option to turn off its locale manipulation, doing that is preferable to using this mechanism. "Gtk" is such a library.

    The return value is a boolean: TRUE if the global locale at the time of call was in effect for the caller; and FALSE if a per-thread locale was in effect.

     bool       sync_locale()
     bool  Perl_sync_locale(pTHX)

"WITH_LC_NUMERIC_SET_TO_NEEDED"
    This macro invokes the supplied statement or block within the context of a "STORE_LC_NUMERIC_SET_TO_NEEDED" .. "RESTORE_LC_NUMERIC" pair if required, so eg:

      WITH_LC_NUMERIC_SET_TO_NEEDED(
        SNPRINTF_G(fv, ebuf, sizeof(ebuf), precis)
      );

    is equivalent to:

      {
    #ifdef USE_LOCALE_NUMERIC
        DECLARATION_FOR_LC_NUMERIC_MANIPULATION;
        STORE_LC_NUMERIC_SET_TO_NEEDED();
    #endif
        SNPRINTF_G(fv, ebuf, sizeof(ebuf), precis);
    #ifdef USE_LOCALE_NUMERIC
        RESTORE_LC_NUMERIC();
    #endif
      }

     void  WITH_LC_NUMERIC_SET_TO_NEEDED(block)

"WITH_LC_NUMERIC_SET_TO_NEEDED_IN"
    Same as "WITH_LC_NUMERIC_SET_TO_NEEDED" with in_lc_numeric provided as the precalculated value of IN_LC(LC_NUMERIC). It is the caller's responsibility to ensure that the status of "PL_compiling" and "PL_hints" cannot have changed since the precalculation.

     void  WITH_LC_NUMERIC_SET_TO_NEEDED_IN(bool in_lc_numeric, block)

Magic
"Magic" is special data attached to SV structures in order to give them "magical" properties. When any Perl code tries to read from, or assign to, an SV marked as magical, it calls the 'get' or 'set' function associated with that SV's magic. A get is called prior to reading an SV, in order to give it a chance to update its internal value (get on $. writes the line number of the last read filehandle into the SV's IV slot), while set is called after an SV has been written to, in order to allow it to make use of its changed value (set on $/ copies the SV's new value to the PL_rs global variable).

Magic is implemented as a linked list of MAGIC structures attached to the SV. Each MAGIC struct holds the type of the magic, a pointer to an array of functions that implement the get(), set(), length() etc functions, plus space for some flags and pointers. For example, a tied variable has a MAGIC structure that contains a pointer to the object associated with the tie.

"mg_clear"
    Clear something magical that the SV represents. See "sv_magic".

     int       mg_clear(      SV *sv)
     int  Perl_mg_clear(pTHX_ SV *sv)

"mg_copy"
    Copies the magic from one SV to another. See "sv_magic".

     int       mg_copy(      SV *sv, SV *nsv, const char *key,
                             I32 klen)
     int  Perl_mg_copy(pTHX_ SV *sv, SV *nsv, const char *key,
                             I32 klen)

"mg_find"
    Finds the magic pointer for "type" matching the SV. See "sv_magic".

     MAGIC *       mg_find(const SV *sv, int type)
     MAGIC *  Perl_mg_find(const SV *sv, int type)

"mg_findext"
    Finds the magic pointer of "type" with the given "vtbl" for the "SV". See "sv_magicext".

     MAGIC *       mg_findext(const SV *sv, int type,
                              const MGVTBL *vtbl)
     MAGIC *  Perl_mg_findext(const SV *sv, int type,
                              const MGVTBL *vtbl)

"mg_free"
    Free any magic storage used by the SV. See "sv_magic".

     int       mg_free(      SV *sv)
     int  Perl_mg_free(pTHX_ SV *sv)

"mg_free_type"
    Remove any magic of type "how" from the SV "sv". See "sv_magic".

     void       mg_free_type(      SV *sv, int how)
     void  Perl_mg_free_type(pTHX_ SV *sv, int how)

"mg_freeext"
    Remove any magic of type "how" using virtual table "vtbl" from the SV "sv". See "sv_magic".

    "mg_freeext(sv, how, NULL)" is equivalent to "mg_free_type(sv, how)".

     void       mg_freeext(      SV *sv, int how, const MGVTBL *vtbl)
     void  Perl_mg_freeext(pTHX_ SV *sv, int how, const MGVTBL *vtbl)

"mg_get"
    Do magic before a value is retrieved from the SV. The type of SV must be >= "SVt_PVMG". See "sv_magic".

     int       mg_get(      SV *sv)
     int  Perl_mg_get(pTHX_ SV *sv)

"mg_magical"
    Turns on the magical status of an SV. See "sv_magic".

     void       mg_magical(SV *sv)
     void  Perl_mg_magical(SV *sv)

"mg_set"
    Do magic after a value is assigned to the SV. See "sv_magic".

     int       mg_set(      SV *sv)
     int  Perl_mg_set(pTHX_ SV *sv)

"MGf_COPY"
"MGf_DUP"
"MGf_LOCAL"
"MGVTBL"
"PERL_MAGIC_arylen"
"PERL_MAGIC_arylen_p"
"PERL_MAGIC_backref"
"PERL_MAGIC_bm"
"PERL_MAGIC_checkcall"
"PERL_MAGIC_collxfrm"
"PERL_MAGIC_dbfile"
"PERL_MAGIC_dbline"
"PERL_MAGIC_debugvar"
"PERL_MAGIC_defelem"
"PERL_MAGIC_destruct"
"PERL_MAGIC_env"
"PERL_MAGIC_envelem"
"PERL_MAGIC_ext"
"PERL_MAGIC_extvalue"
"PERL_MAGIC_fm"
"PERL_MAGIC_hints"
"PERL_MAGIC_hintselem"
"PERL_MAGIC_hook"
"PERL_MAGIC_hookelem"
"PERL_MAGIC_isa"
"PERL_MAGIC_isaelem"
"PERL_MAGIC_lvref"
"PERL_MAGIC_nkeys"
"PERL_MAGIC_nonelem"
"PERL_MAGIC_overload_table"
"PERL_MAGIC_pos"
"PERL_MAGIC_qr"
"PERL_MAGIC_regdata"
"PERL_MAGIC_regdatum"
"PERL_MAGIC_regex_global"
"PERL_MAGIC_rhash"
"PERL_MAGIC_shared"
"PERL_MAGIC_shared_scalar"
"PERL_MAGIC_sig"
"PERL_MAGIC_sigelem"
"PERL_MAGIC_substr"
"PERL_MAGIC_sv"
"PERL_MAGIC_symtab"
"PERL_MAGIC_taint"
"PERL_MAGIC_tied"
"PERL_MAGIC_tiedelem"
"PERL_MAGIC_tiedscalar"
"PERL_MAGIC_utf8"
"PERL_MAGIC_uvar"
"PERL_MAGIC_uvar_elem"
"PERL_MAGIC_vec"
"PERL_MAGIC_vstring"
    Described in perlguts.

"SvTIED_obj"
    Described in perlinterp.

       SvTIED_obj(SV *sv, MAGIC *mg)

Memory Management

"dump_mstats"
    When enabled by compiling with "-DDEBUGGING_MSTATS", print out statistics about malloc as two lines of numbers, one showing the length of the free list for each size category, the second showing the number of mallocs - frees for each size category.

    "s", if not NULL, is used as a phrase to include in the output, such as "after compilation".

     void       dump_mstats(      const char *s)
     void  Perl_dump_mstats(pTHX_ const char *s)

"HAS_MALLOC_GOOD_SIZE"
    This symbol, if defined, indicates that the "malloc_good_size" routine is available for use.

"HAS_MALLOC_SIZE"
    This symbol, if defined, indicates that the "malloc_size" routine is available for use.

"HASATTRIBUTE_MALLOC"
    Can we handle "GCC" attribute for malloc-style functions.

"I_MALLOCMALLOC"
    This symbol, if defined, indicates to the C program that it should include malloc/malloc.h.

     #ifdef I_MALLOCMALLOC
         #include <mallocmalloc.h>
     #endif

"MYMALLOC"
    This symbol, if defined, indicates that we're using our own malloc.

"Newx"
"safemalloc"
    The XSUB-writer's interface to the C "malloc" function.

    Memory obtained by this should ONLY be freed with "Safefree".

    In 5.9.3, Newx() and friends replace the older New() API, and drops the first parameter, x, a debug aid which allowed callers to identify themselves. This aid has been superseded by a new build option, PERL_MEM_LOG (see "PERL_MEM_LOG" in perlhacktips). The older API is still there for use in XS modules supporting older perls.

     void   Newx      (void* ptr, int nitems, type)
     void*  safemalloc(size_t size)

"Newxc"
    The XSUB-writer's interface to the C "malloc" function, with cast. See also "Newx".

    Memory obtained by this should ONLY be freed with "Safefree".

     void  Newxc(void* ptr, int nitems, type, cast)

"Newxz"
"safecalloc"
    The XSUB-writer's interface to the C "calloc" function. The allocated memory is zeroed with "memzero". See also "Newx".

    Memory obtained by this should ONLY be freed with "Safefree".

     void   Newxz     (void* ptr, int nitems, type)
     void*  safecalloc(size_t nitems, size_t item_size)

"PERL_MALLOC_WRAP"
    This symbol, if defined, indicates that we'd like malloc wrap checks.

"Renew"
"saferealloc"
    The XSUB-writer's interface to the C "realloc" function.

    Memory obtained by this should ONLY be freed with "Safefree".

     void   Renew      (void* ptr, int nitems, type)
     void*  saferealloc(void *ptr, size_t size)

"Renewc"
    The XSUB-writer's interface to the C "realloc" function, with cast.

    Memory obtained by this should ONLY be freed with "Safefree".

     void  Renewc(void* ptr, int nitems, type, cast)

"safecalloc*"
    Described under "Newxz"

"Safefree"
    The XSUB-writer's interface to the C "free" function.

    This should ONLY be used on memory obtained using "Newx" and friends.

     void  Safefree(void* ptr)

"safemalloc*"
    Described under "Newx"

"saferealloc*"
    Described under "Renew"

"safesyscalloc"
    Safe version of system's calloc()

     Malloc_t       safesyscalloc(MEM_SIZE elements, MEM_SIZE size)
     Malloc_t  Perl_safesyscalloc(MEM_SIZE elements, MEM_SIZE size)

"safesysfree"
    Safe version of system's free()

     Free_t       safesysfree(Malloc_t where)
     Free_t  Perl_safesysfree(Malloc_t where)

"safesysmalloc"
    Paranoid version of system's malloc()

     Malloc_t       safesysmalloc(MEM_SIZE nbytes)
     Malloc_t  Perl_safesysmalloc(MEM_SIZE nbytes)

"safesysrealloc"
    Paranoid version of system's realloc()

     Malloc_t       safesysrealloc(Malloc_t where, MEM_SIZE nbytes)
     Malloc_t  Perl_safesysrealloc(Malloc_t where, MEM_SIZE nbytes)

MRO
These functions are related to the method resolution order of perl classes Also see perlmroapi.

"HvMROMETA"
    Described in perlmroapi.

     struct mro_meta *  HvMROMETA(HV *hv)

"mro_get_from_name"
    Returns the previously registered mro with the given "name", or NULL if not registered. See ""mro_register"".

     const struct mro_alg *  Perl_mro_get_from_name(pTHX_ SV *name)

"mro_get_linear_isa"
    Returns the mro linearisation for the given stash. By default, this will be whatever "mro_get_linear_isa_dfs" returns unless some other MRO is in effect for the stash. The return value is a read-only AV* whose values are string SVs giving class names.

    You are responsible for SvREFCNT_inc() on the return value if you plan to store it anywhere semi-permanently (otherwise it might be deleted out from under you the next time the cache is invalidated).

     AV *       mro_get_linear_isa(      HV *stash)
     AV *  Perl_mro_get_linear_isa(pTHX_ HV *stash)

"MRO_GET_PRIVATE_DATA"
    Described in perlmroapi.

     SV*  MRO_GET_PRIVATE_DATA(struct mro_meta *const smeta,
                               const struct mro_alg *const which)

"mro_method_changed_in"
    Invalidates method caching on any child classes of the given stash, so that they might notice the changes in this one.

    Ideally, all instances of "PL_sub_generation++" in perl source outside of mro.c should be replaced by calls to this.

    Perl automatically handles most of the common ways a method might be redefined. However, there are a few ways you could change a method in a stash without the cache code noticing, in which case you need to call this method afterwards:

    1) Directly manipulating the stash HV entries from XS code.

    2) Assigning a reference to a readonly scalar constant into a stash entry in order to create a constant subroutine (like constant.pm does).

    This same method is available from pure perl via, mro::method_changed_in(classname).

     void       mro_method_changed_in(      HV *stash)
     void  Perl_mro_method_changed_in(pTHX_ HV *stash)

"mro_register"
    Registers a custom mro plugin. See perlmroapi for details on this and other mro functions.

     void  Perl_mro_register(pTHX_ const struct mro_alg *mro)

"mro_set_mro"
    Set "meta" to the value contained in the registered mro plugin whose name is "name".

    Croaks if "name" hasn't been registered

     void  Perl_mro_set_mro(pTHX_ struct mro_meta * const meta,
                                  SV * const name)

"mro_set_private_data"
    Described in perlmroapi.

     SV *  Perl_mro_set_private_data(pTHX_
                                   struct mro_meta * const smeta,
                                   const struct mro_alg * const which,
                                   SV * const data)

Multicall Functions

"dMULTICALL"
    Declare local variables for a multicall. See "LIGHTWEIGHT CALLBACKS" in perlcall.

       dMULTICALL;

"MULTICALL"
    Make a lightweight callback. See "LIGHTWEIGHT CALLBACKS" in perlcall.

       MULTICALL;

"POP_MULTICALL"
    Closing bracket for a lightweight callback. See "LIGHTWEIGHT CALLBACKS" in perlcall.

       POP_MULTICALL;

"PUSH_MULTICALL"
    Opening bracket for a lightweight callback. See "LIGHTWEIGHT CALLBACKS" in perlcall.

       PUSH_MULTICALL(CV* the_cv);

Numeric Functions

"Atof*"
    Described under "my_atof"

"grok_atoUV"
    parse a string, looking for a decimal unsigned integer.

    On entry, "pv" points to the beginning of the string; "valptr" points to a UV that will receive the converted value, if found; "endptr" is either NULL or points to a variable that points to one byte beyond the point in "pv" that this routine should examine. If "endptr" is NULL, "pv" is assumed to be NUL-terminated.

    Returns FALSE if "pv" doesn't represent a valid unsigned integer value (with no leading zeros). Otherwise it returns TRUE, and sets *valptr to that value.

    If you constrain the portion of "pv" that is looked at by this function (by passing a non-NULL "endptr"), and if the initial bytes of that portion form a valid value, it will return TRUE, setting *endptr to the byte following the final digit of the value. But if there is no constraint at what's looked at, all of "pv" must be valid in order for TRUE to be returned. *endptr is unchanged from its value on input if FALSE is returned;

    The only characters this accepts are the decimal digits '0'..'9'.

    As opposed to atoi(3) or strtol(3), "grok_atoUV" does NOT allow optional leading whitespace, nor negative inputs. If such features are required, the calling code needs to explicitly implement those.

    Note that this function returns FALSE for inputs that would overflow a UV, or have leading zeros. Thus a single 0 is accepted, but not 00 nor 01, 002, etc.

    Background: "atoi" has severe problems with illegal inputs, it cannot be used for incremental parsing, and therefore should be avoided "atoi" and "strtol" are also affected by locale settings, which can also be seen as a bug (global state controlled by user environment).

     bool       grok_atoUV(const char *pv, UV *valptr,
                           const char **endptr)
     bool  Perl_grok_atoUV(const char *pv, UV *valptr,
                           const char **endptr)

"grok_bin"
    converts a string representing a binary number to numeric form.

    On entry "start" and *len_p give the string to scan, *flags gives conversion flags, and "result" should be "NULL" or a pointer to an NV. The scan stops at the end of the string, or at just before the first invalid character. Unless "PERL_SCAN_SILENT_ILLDIGIT" is set in *flags, encountering an invalid character (except NUL) will also trigger a warning. On return *len_p is set to the length of the scanned string, and *flags gives output flags.

    If the value is <= "UV_MAX" it is returned as a UV, the output flags are clear, and nothing is written to *result. If the value is > "UV_MAX", "grok_bin" returns "UV_MAX", sets "PERL_SCAN_GREATER_THAN_UV_MAX" in the output flags, and writes an approximation of the correct value into *result (which is an NV; or the approximation is discarded if "result" is NULL).

    The binary number may optionally be prefixed with "0b" or "b" unless "PERL_SCAN_DISALLOW_PREFIX" is set in *flags on entry.

    If "PERL_SCAN_ALLOW_UNDERSCORES" is set in *flags then any or all pairs of digits may be separated from each other by a single underscore; also a single leading underscore is accepted.

     UV       grok_bin(      const char *start, STRLEN *len_p,
                             I32 *flags, NV *result)
     UV  Perl_grok_bin(pTHX_ const char *start, STRLEN *len_p,
                             I32 *flags, NV *result)

"grok_hex"
    converts a string representing a hex number to numeric form.

    On entry "start" and *len_p give the string to scan, *flags gives conversion flags, and "result" should be "NULL" or a pointer to an NV. The scan stops at the end of the string, or at just before the first invalid character. Unless "PERL_SCAN_SILENT_ILLDIGIT" is set in *flags, encountering an invalid character (except NUL) will also trigger a warning. On return *len_p is set to the length of the scanned string, and *flags gives output flags.

    If the value is <= "UV_MAX" it is returned as a UV, the output flags are clear, and nothing is written to *result. If the value is > "UV_MAX", "grok_hex" returns "UV_MAX", sets "PERL_SCAN_GREATER_THAN_UV_MAX" in the output flags, and writes an approximation of the correct value into *result (which is an NV; or the approximation is discarded if "result" is NULL).

    The hex number may optionally be prefixed with "0x" or "x" unless "PERL_SCAN_DISALLOW_PREFIX" is set in *flags on entry.

    If "PERL_SCAN_ALLOW_UNDERSCORES" is set in *flags then any or all pairs of digits may be separated from each other by a single underscore; also a single leading underscore is accepted.

     UV       grok_hex(      const char *start, STRLEN *len_p,
                             I32 *flags, NV *result)
     UV  Perl_grok_hex(pTHX_ const char *start, STRLEN *len_p,
                             I32 *flags, NV *result)

"grok_infnan"
    Helper for grok_number(), accepts various ways of spelling "infinity" or "not a number", and returns one of the following flag combinations:

      IS_NUMBER_INFINITY
      IS_NUMBER_NAN
      IS_NUMBER_INFINITY | IS_NUMBER_NEG
      IS_NUMBER_NAN | IS_NUMBER_NEG
      0

    possibly |-ed with "IS_NUMBER_TRAILING".

    If an infinity or a not-a-number is recognized, *sp will point to one byte past the end of the recognized string. If the recognition fails, zero is returned, and *sp will not move.

     int       grok_infnan(      const char **sp, const char *send)
     int  Perl_grok_infnan(pTHX_ const char **sp, const char *send)

"grok_number"
"grok_number_flags"
    Look for a number in the "len" bytes starting at "pv". If one isn't found, return 0; otherwise return its type (and optionally its value). In "grok_number" all "len" bytes must be either leading "isSPACE" characters or part of the number. The same is true in "grok_number_flags" unless "flags" contains the "PERL_SCAN_TRAILING" bit, which allows for trailing non-numeric text. (This is the only difference between the two functions.)

    The returned type is the ORing of various bits (#defined in perl.h) as described below:

    If the number is negative, the returned type will include the "IS_NUMBER_NEG" bit.

    If the absolute value of the integral portion of the found number fits in a UV, the returned type will include the "IS_NUMBER_IN_UV" bit. If it won't fit, instead the "IS_NUMBER_GREATER_THAN_UV_MAX" bit will be included.

    If the found number is not an integer, the returned type will include the "IS_NUMBER_NOT_INT" bit. This happens either if the number is expressed in exponential "e" notation, or if it includes a decimal point (radix) character. If exponential notation is used, then neither IS_NUMBER_IN_UV nor IS_NUMBER_GREATER_THAN_UV_MAX bits are set. Otherwise, the integer part of the number is used to determine the "IS_NUMBER_IN_UV" and "IS_NUMBER_GREATER_THAN_UV_MAX" bits.

    If the found number is a string indicating it is infinity, the "IS_NUMBER_INFINITY" and "IS_NUMBER_NOT_INT" bits are included in the returned type.

    If the found number is a string indicating it is not a number, the "IS_NUMBER_NAN" and "IS_NUMBER_NOT_INT" bits are included in the returned type.

    You can get the number's absolute integral value returned to you by calling these functions with a non-NULL "valuep" argument. If the returned type includes the "IS_NUMBER_IN_UV" bit, *valuep will be set to the correct value. Otherwise, it could well have been zapped with garbage.

    In "grok_number_flags" when "flags" contains the "PERL_SCAN_TRAILING" bit, and trailing non-numeric text was found, the returned type will include the "IS_NUMBER_TRAILING" bit.

     int       grok_number      (      const char *pv, STRLEN len,
                                       UV *valuep)
     int  Perl_grok_number      (pTHX_ const char *pv, STRLEN len,
                                       UV *valuep)
     int       grok_number_flags(      const char *pv, STRLEN len,
                                       UV *valuep, U32 flags)
     int  Perl_grok_number_flags(pTHX_ const char *pv, STRLEN len,
                                       UV *valuep, U32 flags)

"grok_numeric_radix"
"GROK_NUMERIC_RADIX"
    These are identical.

    Scan and skip for a numeric decimal separator (radix).

     bool       grok_numeric_radix(      const char **sp,
                                         const char *send)
     bool  Perl_grok_numeric_radix(pTHX_ const char **sp,
                                         const char *send)
     bool       GROK_NUMERIC_RADIX(      const char **sp,
                                         const char *send)

"grok_oct"
    converts a string representing an octal number to numeric form.

    On entry "start" and *len_p give the string to scan, *flags gives conversion flags, and "result" should be "NULL" or a pointer to an NV. The scan stops at the end of the string, or at just before the first invalid character. Unless "PERL_SCAN_SILENT_ILLDIGIT" is set in *flags, encountering an invalid character (except NUL) will also trigger a warning. On return *len_p is set to the length of the scanned string, and *flags gives output flags.

    If the value is <= "UV_MAX" it is returned as a UV, the output flags are clear, and nothing is written to *result. If the value is > "UV_MAX", "grok_oct" returns "UV_MAX", sets "PERL_SCAN_GREATER_THAN_UV_MAX" in the output flags, and writes an approximation of the correct value into *result (which is an NV; or the approximation is discarded if "result" is NULL).

    If "PERL_SCAN_ALLOW_UNDERSCORES" is set in *flags then any or all pairs of digits may be separated from each other by a single underscore; also a single leading underscore is accepted.

    The "PERL_SCAN_DISALLOW_PREFIX" flag is always treated as being set for this function.

     UV       grok_oct(      const char *start, STRLEN *len_p,
                             I32 *flags, NV *result)
     UV  Perl_grok_oct(pTHX_ const char *start, STRLEN *len_p,
                             I32 *flags, NV *result)

"isinfnan"
    Perl_isinfnan() is a utility function that returns true if the NV argument is either an infinity or a "NaN", false otherwise. To test in more detail, use Perl_isinf() and Perl_isnan().

    This is also the logical inverse of Perl_isfinite().

     bool       isinfnan(NV nv)
     bool  Perl_isinfnan(NV nv)

"my_atof"
"Atof"
    These each are "atof(3)", but properly work with Perl locale handling, accepting a dot radix character always, but also the current locale's radix character if and only if called from within the lexical scope of a Perl "use locale" statement.

    N.B. "s" must be NUL terminated.

     NV       my_atof(      const char *s)
     NV  Perl_my_atof(pTHX_ const char *s)
     NV       Atof   (      const char * const s)

"my_strtod"
"Strtod"
    These are identical.

    They act like the libc "strtod(3)" function, with three exceptions:

    1.  Their return value is an NV. Plain "strod" returns a double precision value.

    2.  Plain "strtod" always is expecting the radix character (or string) to be the one specified by the underlying locale the program is executing in. This is almost universally a dot (U+002E) or a comma (U+002C).

        In contrast, these expect the radix to be a dot, except when called from within the scope of "use locale", in which case they act like plain "strtod", expecting the radix to be that specified by the current locale.

    3.  These are are available even on platforms that lack plain strtod().

     NV       my_strtod(const char * const s, char **e)
     NV  Perl_my_strtod(const char * const s, char **e)
     NV       Strtod   (const char * const s, char **e)

"PERL_ABS"
    Typeless "abs" or "fabs", etc. (The usage below indicates it is for integers, but it works for any type.) Use instead of these, since the C library ones force their argument to be what it is expecting, potentially leading to disaster. But also beware that this evaluates its argument twice, so no "x++".

     int  PERL_ABS(int x)

"Perl_acos"
"Perl_asin"
"Perl_atan"
"Perl_atan2"
"Perl_ceil"
"Perl_cos"
"Perl_cosh"
"Perl_exp"
"Perl_floor"
"Perl_fmod"
"Perl_frexp"
"Perl_isfinite"
"Perl_isinf"
"Perl_isnan"
"Perl_ldexp"
"Perl_log"
"Perl_log10"
"Perl_modf"
"Perl_pow"
"Perl_sin"
"Perl_sinh"
"Perl_sqrt"
"Perl_tan"
"Perl_tanh"
    These perform the corresponding mathematical operation on the operand(s), using the libc function designed for the task that has just enough precision for an NV on this platform. If no such function with sufficient precision exists, the highest precision one available is used.

     NV  Perl_acos    (NV x)
     NV  Perl_asin    (NV x)
     NV  Perl_atan    (NV x)
     NV  Perl_atan2   (NV x, NV y)
     NV  Perl_ceil    (NV x)
     NV  Perl_cos     (NV x)
     NV  Perl_cosh    (NV x)
     NV  Perl_exp     (NV x)
     NV  Perl_floor   (NV x)
     NV  Perl_fmod    (NV x, NV y)
     NV  Perl_frexp   (NV x, int *exp)
     IV  Perl_isfinite(NV x)
     IV  Perl_isinf   (NV x)
     IV  Perl_isnan   (NV x)
     NV  Perl_ldexp   (NV x, int exp)
     NV  Perl_log     (NV x)
     NV  Perl_log10   (NV x)
     NV  Perl_modf    (NV x, NV *iptr)
     NV  Perl_pow     (NV x, NV y)
     NV  Perl_sin     (NV x)
     NV  Perl_sinh    (NV x)
     NV  Perl_sqrt    (NV x)
     NV  Perl_tan     (NV x)
     NV  Perl_tanh    (NV x)

"Perl_signbit"
    NOTE: "Perl_signbit" is experimental and may change or be removed without notice.

    Return a non-zero integer if the sign bit on an NV is set, and 0 if it is not.

    If Configure detects this system has a signbit() that will work with our NVs, then we just use it via the "#define" in perl.h. Otherwise, fall back on this implementation. The main use of this function is catching -0.0.

    "Configure" notes: This function is called 'Perl_signbit' instead of a plain 'signbit' because it is easy to imagine a system having a signbit() function or macro that doesn't happen to work with our particular choice of NVs. We shouldn't just re-"#define" "signbit" as "Perl_signbit" and expect the standard system headers to be happy. Also, this is a no-context function (no "pTHX_") because Perl_signbit() is usually re-"#defined" in perl.h as a simple macro call to the system's signbit(). Users should just always call Perl_signbit().

     int  Perl_signbit(NV f)

"Perl_sin*"
"Perl_sinh*"
"Perl_sqrt*"
"Perl_tan*"
"Perl_tanh*"
    Described under "Perl_acos"

"PL_hexdigit"
    This array, indexed by an integer, converts that value into the character that represents it. For example, if the input is 8, the return will be a string whose first character is '8'. What is actually returned is a pointer into a string. All you are interested in is the first character of that string. To get uppercase letters (for the values 10..15), add 16 to the index. Hence, "PL_hexdigit[11]" is 'b', and "PL_hexdigit[11+16]" is 'B'. Adding 16 to an index whose representation is '0'..'9' yields the same as not adding 16. Indices outside the range 0..31 result in (bad) undefined behavior.

"READ_XDIGIT"
    Returns the value of an ASCII-range hex digit and advances the string pointer. Behaviour is only well defined when isXDIGIT(*str) is true.

     U8  READ_XDIGIT(char str*)

"scan_bin"
    For backwards compatibility. Use "grok_bin" instead.

     NV       scan_bin(      const char *start, STRLEN len,
                             STRLEN *retlen)
     NV  Perl_scan_bin(pTHX_ const char *start, STRLEN len,
                             STRLEN *retlen)

"scan_hex"
    For backwards compatibility. Use "grok_hex" instead.

     NV       scan_hex(      const char *start, STRLEN len,
                             STRLEN *retlen)
     NV  Perl_scan_hex(pTHX_ const char *start, STRLEN len,
                             STRLEN *retlen)

"scan_oct"
    For backwards compatibility. Use "grok_oct" instead.

     NV       scan_oct(      const char *start, STRLEN len,
                             STRLEN *retlen)
     NV  Perl_scan_oct(pTHX_ const char *start, STRLEN len,
                             STRLEN *retlen)

"Strtod*"
    Described under "my_strtod"

"Strtol"
    Platform and configuration independent "strtol". This expands to the appropriate "strotol"-like function based on the platform and Configure options>. For example it could expand to "strtoll" or "strtoq" instead of "strtol".

     NV  Strtol(const char * const s, char ** e, int base)

"Strtoul"
    Platform and configuration independent "strtoul". This expands to the appropriate "strotoul"-like function based on the platform and Configure options>. For example it could expand to "strtoull" or "strtouq" instead of "strtoul".

     NV  Strtoul(const char * const s, char ** e, int base)

Optrees

"alloccopstash"
    NOTE: "alloccopstash" is experimental and may change or be removed without notice.

    Available only under threaded builds, this function allocates an entry in "PL_stashpad" for the stash passed to it.

     PADOFFSET       alloccopstash(      HV *hv)
     PADOFFSET  Perl_alloccopstash(pTHX_ HV *hv)

"BINOP"
    Described in perlguts.

"block_end"
    Handles compile-time scope exit. "floor" is the savestack index returned by "block_start", and "seq" is the body of the block. Returns the block, possibly modified.

     OP *       block_end(      I32 floor, OP *seq)
     OP *  Perl_block_end(pTHX_ I32 floor, OP *seq)

"block_start"
    Handles compile-time scope entry. Arranges for hints to be restored on block exit and also handles pad sequence numbers to make lexical variables scope right. Returns a savestack index for use with "block_end".

     int       block_start(      int full)
     int  Perl_block_start(pTHX_ int full)

"ck_entersub_args_list"
    Performs the default fixup of the arguments part of an "entersub" op tree. This consists of applying list context to each of the argument ops. This is the standard treatment used on a call marked with "&", or a method call, or a call through a subroutine reference, or any other call where the callee can't be identified at compile time, or a call where the callee has no prototype.

     OP *       ck_entersub_args_list(      OP *entersubop)
     OP *  Perl_ck_entersub_args_list(pTHX_ OP *entersubop)

"ck_entersub_args_proto"
    Performs the fixup of the arguments part of an "entersub" op tree based on a subroutine prototype. This makes various modifications to the argument ops, from applying context up to inserting "refgen" ops, and checking the number and syntactic types of arguments, as directed by the prototype. This is the standard treatment used on a subroutine call, not marked with "&", where the callee can be identified at compile time and has a prototype.

    "protosv" supplies the subroutine prototype to be applied to the call. It may be a normal defined scalar, of which the string value will be used. Alternatively, for convenience, it may be a subroutine object (a "CV*" that has been cast to "SV*") which has a prototype. The prototype supplied, in whichever form, does not need to match the actual callee referenced by the op tree.

    If the argument ops disagree with the prototype, for example by having an unacceptable number of arguments, a valid op tree is returned anyway. The error is reflected in the parser state, normally resulting in a single exception at the top level of parsing which covers all the compilation errors that occurred. In the error message, the callee is referred to by the name defined by the "namegv" parameter.

     OP *       ck_entersub_args_proto(      OP *entersubop,
                                             GV *namegv, SV *protosv)
     OP *  Perl_ck_entersub_args_proto(pTHX_ OP *entersubop,
                                             GV *namegv, SV *protosv)

"ck_entersub_args_proto_or_list"
    Performs the fixup of the arguments part of an "entersub" op tree either based on a subroutine prototype or using default list-context processing. This is the standard treatment used on a subroutine call, not marked with "&", where the callee can be identified at compile time.

    "protosv" supplies the subroutine prototype to be applied to the call, or indicates that there is no prototype. It may be a normal scalar, in which case if it is defined then the string value will be used as a prototype, and if it is undefined then there is no prototype. Alternatively, for convenience, it may be a subroutine object (a "CV*" that has been cast to "SV*"), of which the prototype will be used if it has one. The prototype (or lack thereof) supplied, in whichever form, does not need to match the actual callee referenced by the op tree.

    If the argument ops disagree with the prototype, for example by having an unacceptable number of arguments, a valid op tree is returned anyway. The error is reflected in the parser state, normally resulting in a single exception at the top level of parsing which covers all the compilation errors that occurred. In the error message, the callee is referred to by the name defined by the "namegv" parameter.

     OP *       ck_entersub_args_proto_or_list(      OP *entersubop,
                                                     GV *namegv,
                                                     SV *protosv)
     OP *  Perl_ck_entersub_args_proto_or_list(pTHX_ OP *entersubop,
                                                     GV *namegv,
                                                     SV *protosv)

"cv_const_sv"
    If "cv" is a constant sub eligible for inlining, returns the constant value returned by the sub. Otherwise, returns "NULL".

    Constant subs can be created with "newCONSTSUB" or as described in "Constant Functions" in perlsub.

     SV *       cv_const_sv(const CV * const cv)
     SV *  Perl_cv_const_sv(const CV * const cv)

"cv_get_call_checker"
    The original form of "cv_get_call_checker_flags", which does not return checker flags. When using a checker function returned by this function, it is only safe to call it with a genuine GV as its "namegv" argument.

     void       cv_get_call_checker(      CV *cv,
                                          Perl_call_checker *ckfun_p,
                                          SV **ckobj_p)
     void  Perl_cv_get_call_checker(pTHX_ CV *cv,
                                          Perl_call_checker *ckfun_p,
                                          SV **ckobj_p)

"cv_get_call_checker_flags"
    Retrieves the function that will be used to fix up a call to "cv". Specifically, the function is applied to an "entersub" op tree for a subroutine call, not marked with "&", where the callee can be identified at compile time as "cv".

    The C-level function pointer is returned in *ckfun_p, an SV argument for it is returned in *ckobj_p, and control flags are returned in *ckflags_p. The function is intended to be called in this manner:

     entersubop = (*ckfun_p)(aTHX_ entersubop, namegv, (*ckobj_p));

    In this call, "entersubop" is a pointer to the "entersub" op, which may be replaced by the check function, and "namegv" supplies the name that should be used by the check function to refer to the callee of the "entersub" op if it needs to emit any diagnostics. It is permitted to apply the check function in non-standard situations, such as to a call to a different subroutine or to a method call.

    "namegv" may not actually be a GV. If the "CALL_CHECKER_REQUIRE_GV" bit is clear in *ckflags_p, it is permitted to pass a CV or other SV instead, anything that can be used as the first argument to "cv_name". If the "CALL_CHECKER_REQUIRE_GV" bit is set in *ckflags_p then the check function requires "namegv" to be a genuine GV.

    By default, the check function is Perl_ck_entersub_args_proto_or_list, the SV parameter is "cv" itself, and the "CALL_CHECKER_REQUIRE_GV" flag is clear. This implements standard prototype processing. It can be changed, for a particular subroutine, by "cv_set_call_checker_flags".

    If the "CALL_CHECKER_REQUIRE_GV" bit is set in "gflags" then it indicates that the caller only knows about the genuine GV version of "namegv", and accordingly the corresponding bit will always be set in *ckflags_p, regardless of the check function's recorded requirements. If the "CALL_CHECKER_REQUIRE_GV" bit is clear in "gflags" then it indicates the caller knows about the possibility of passing something other than a GV as "namegv", and accordingly the corresponding bit may be either set or clear in *ckflags_p, indicating the check function's recorded requirements.

    "gflags" is a bitset passed into "cv_get_call_checker_flags", in which only the "CALL_CHECKER_REQUIRE_GV" bit currently has a defined meaning (for which see above). All other bits should be clear.

     void       cv_get_call_checker_flags(CV *cv, U32 gflags,
                                           Perl_call_checker *ckfun_p,
                                           SV **ckobj_p,
                                           U32 *ckflags_p)
     void  Perl_cv_get_call_checker_flags(pTHX_ CV *cv, U32 gflags,
                                           Perl_call_checker *ckfun_p,
                                           SV **ckobj_p,
                                           U32 *ckflags_p)

"cv_set_call_checker"
    The original form of "cv_set_call_checker_flags", which passes it the "CALL_CHECKER_REQUIRE_GV" flag for backward-compatibility. The effect of that flag setting is that the check function is guaranteed to get a genuine GV as its "namegv" argument.

     void       cv_set_call_checker(      CV *cv,
                                          Perl_call_checker ckfun,
                                          SV *ckobj)
     void  Perl_cv_set_call_checker(pTHX_ CV *cv,
                                          Perl_call_checker ckfun,
                                          SV *ckobj)

"cv_set_call_checker_flags"
    Sets the function that will be used to fix up a call to "cv". Specifically, the function is applied to an "entersub" op tree for a subroutine call, not marked with "&", where the callee can be identified at compile time as "cv".

    The C-level function pointer is supplied in "ckfun", an SV argument for it is supplied in "ckobj", and control flags are supplied in "ckflags". The function should be defined like this:

        STATIC OP * ckfun(pTHX_ OP *op, GV *namegv, SV *ckobj)

    It is intended to be called in this manner:

        entersubop = ckfun(aTHX_ entersubop, namegv, ckobj);

    In this call, "entersubop" is a pointer to the "entersub" op, which may be replaced by the check function, and "namegv" supplies the name that should be used by the check function to refer to the callee of the "entersub" op if it needs to emit any diagnostics. It is permitted to apply the check function in non-standard situations, such as to a call to a different subroutine or to a method call.

    "namegv" may not actually be a GV. For efficiency, perl may pass a CV or other SV instead. Whatever is passed can be used as the first argument to "cv_name". You can force perl to pass a GV by including "CALL_CHECKER_REQUIRE_GV" in the "ckflags".

    "ckflags" is a bitset, in which only the "CALL_CHECKER_REQUIRE_GV" bit currently has a defined meaning (for which see above). All other bits should be clear.

    The current setting for a particular CV can be retrieved by "cv_get_call_checker_flags".

     void       cv_set_call_checker_flags(    CV *cv,
                                              Perl_call_checker ckfun,
                                              SV *ckobj, U32 ckflags)
     void  Perl_cv_set_call_checker_flags(pTHX_ CV *cv,
                                              Perl_call_checker ckfun,
                                              SV *ckobj, U32 ckflags)

"finalize_optree"
    This function finalizes the optree. Should be called directly after the complete optree is built. It does some additional checking which can't be done in the normal "ck_"xxx functions and makes the tree thread-safe.

     void       finalize_optree(      OP *o)
     void  Perl_finalize_optree(pTHX_ OP *o)

"forbid_outofblock_ops"
    NOTE: "forbid_outofblock_ops" is experimental and may change or be removed without notice.

    Checks an optree that implements a block, to ensure there are no control-flow ops that attempt to leave the block. Any "OP_RETURN" is forbidden, as is any "OP_GOTO". Loops are analysed, so any LOOPEX op ("OP_NEXT", "OP_LAST" or "OP_REDO") that affects a loop that contains it within the block are permitted, but those that do not are forbidden.

    If any of these forbidden constructions are detected, an exception is thrown by using the op name and the blockname argument to construct a suitable message.

    This function alone is not sufficient to ensure the optree does not perform any of these forbidden activities during runtime, as it might call a different function that performs a non-local LOOPEX, or a string-eval() that performs a "goto", or various other things. It is intended purely as a compile-time check for those that could be detected statically. Additional runtime checks may be required depending on the circumstance it is used for.

    Note currently that all "OP_GOTO" ops are forbidden, even in cases where they might otherwise be safe to execute. This may be permitted in a later version.

     void       forbid_outofblock_ops(      OP *o,
                                            const char *blockname)
     void  Perl_forbid_outofblock_ops(pTHX_ OP *o,
                                            const char *blockname)

"LINKLIST"
    Given the root of an optree, link the tree in execution order using the "op_next" pointers and return the first op executed. If this has already been done, it will not be redone, and "o->op_next" will be returned. If "o->op_next" is not already set, "o" should be at least an "UNOP".

     OP*  LINKLIST(OP *o)

"LISTOP"
"LOGOP"
"LOOP"
    Described in perlguts.

"newANONATTRSUB"
    Construct a nameless (anonymous) Perl subroutine, also performing some surrounding jobs.

    This is the same as ""newATTRSUB_x"" in perlintern with its "o_is_gv" parameter set to FALSE, and its "o" parameter to NULL. For more details, see ""newATTRSUB_x"" in perlintern.

     OP *       newANONATTRSUB(      I32 floor, OP *proto, OP *attrs,
                                     OP *block)
     OP *  Perl_newANONATTRSUB(pTHX_ I32 floor, OP *proto, OP *attrs,
                                     OP *block)

"newANONHASH"
    Constructs, checks, and returns an anonymous hash op.

     OP *       newANONHASH(      OP *o)
     OP *  Perl_newANONHASH(pTHX_ OP *o)

"newANONLIST"
    Constructs, checks, and returns an anonymous list op.

     OP *       newANONLIST(      OP *o)
     OP *  Perl_newANONLIST(pTHX_ OP *o)

"newANONSUB"
    Construct a nameless (anonymous) Perl subroutine without attributes, also performing some surrounding jobs.

    This is the same as ""newATTRSUB_x"" in perlintern with its "o_is_gv" parameter set to FALSE, and its "o" and "attrs" parameters to NULL. For more details, see ""newATTRSUB_x"" in perlintern.

     OP *       newANONSUB(      I32 floor, OP *proto, OP *block)
     OP *  Perl_newANONSUB(pTHX_ I32 floor, OP *proto, OP *block)

"newARGDEFELEMOP"
    Constructs and returns a new "OP_ARGDEFELEM" op which provides a defaulting expression given by "expr" for the signature parameter at the index given by "argindex". The expression optree is consumed by this function and becomes part of the returned optree.

     OP *       newARGDEFELEMOP(      I32 flags, OP *expr,
                                      I32 argindex)
     OP *  Perl_newARGDEFELEMOP(pTHX_ I32 flags, OP *expr,
                                      I32 argindex)

"newASSIGNOP"
    Constructs, checks, and returns an assignment op. "left" and "right" supply the parameters of the assignment; they are consumed by this function and become part of the constructed op tree.

    If "optype" is "OP_ANDASSIGN", "OP_ORASSIGN", or "OP_DORASSIGN", then a suitable conditional optree is constructed. If "optype" is the opcode of a binary operator, such as "OP_BIT_OR", then an op is constructed that performs the binary operation and assigns the result to the left argument. Either way, if "optype" is non-zero then "flags" has no effect.

    If "optype" is zero, then a plain scalar or list assignment is constructed. Which type of assignment it is is automatically determined. "flags" gives the eight bits of "op_flags", except that "OPf_KIDS" will be set automatically, and, shifted up eight bits, the eight bits of "op_private", except that the bit with value 1 or 2 is automatically set as required.

     OP *       newASSIGNOP(      I32 flags, OP *left, I32 optype,
                                  OP *right)
     OP *  Perl_newASSIGNOP(pTHX_ I32 flags, OP *left, I32 optype,
                                  OP *right)

"newATTRSUB"
    Construct a Perl subroutine, also performing some surrounding jobs, returning a pointer to the constructed subroutine.

    This is the same as ""newATTRSUB_x"" in perlintern with its "o_is_gv" parameter set to FALSE. This means that if "o" is null, the new sub will be anonymous; otherwise the name will be derived from "o" in the way described (as with all other details) in ""newATTRSUB_x"" in perlintern.

     CV *  newATTRSUB(I32 floor, OP *o, OP *proto, OP *attrs,
                      OP *block)

"newAVREF"
    Constructs, checks, and returns an arrary reference op.

     OP *       newAVREF(      OP *o)
     OP *  Perl_newAVREF(pTHX_ OP *o)

"newBINOP"
    Constructs, checks, and returns an op of any binary type. "type" is the opcode. "flags" gives the eight bits of "op_flags", except that "OPf_KIDS" will be set automatically, and, shifted up eight bits, the eight bits of "op_private", except that the bit with value 1 or 2 is automatically set as required. "first" and "last" supply up to two ops to be the direct children of the binary op; they are consumed by this function and become part of the constructed op tree.

     OP *       newBINOP(      I32 type, I32 flags, OP *first,
                               OP *last)
     OP *  Perl_newBINOP(pTHX_ I32 type, I32 flags, OP *first,
                               OP *last)

"newCONDOP"
    Constructs, checks, and returns a conditional-expression ("cond_expr") op. "flags" gives the eight bits of "op_flags", except that "OPf_KIDS" will be set automatically, and, shifted up eight bits, the eight bits of "op_private", except that the bit with value 1 is automatically set. "first" supplies the expression selecting between the two branches, and "trueop" and "falseop" supply the branches; they are consumed by this function and become part of the constructed op tree.

     OP *       newCONDOP(      I32 flags, OP *first, OP *trueop,
                                OP *falseop)
     OP *  Perl_newCONDOP(pTHX_ I32 flags, OP *first, OP *trueop,
                                OP *falseop)

"newCONSTSUB"
"newCONSTSUB_flags"
    Construct a constant subroutine, also performing some surrounding jobs. A scalar constant-valued subroutine is eligible for inlining at compile-time, and in Perl code can be created by "sub FOO () { 123 }". Other kinds of constant subroutine have other treatment.

    The subroutine will have an empty prototype and will ignore any arguments when called. Its constant behaviour is determined by "sv". If "sv" is null, the subroutine will yield an empty list. If "sv" points to a scalar, the subroutine will always yield that scalar. If "sv" points to an array, the subroutine will always yield a list of the elements of that array in list context, or the number of elements in the array in scalar context. This function takes ownership of one counted reference to the scalar or array, and will arrange for the object to live as long as the subroutine does. If "sv" points to a scalar then the inlining assumes that the value of the scalar will never change, so the caller must ensure that the scalar is not subsequently written to. If "sv" points to an array then no such assumption is made, so it is ostensibly safe to mutate the array or its elements, but whether this is really supported has not been determined.

    The subroutine will have "CvFILE" set according to "PL_curcop". Other aspects of the subroutine will be left in their default state. The caller is free to mutate the subroutine beyond its initial state after this function has returned.

    If "name" is null then the subroutine will be anonymous, with its "CvGV" referring to an "__ANON__" glob. If "name" is non-null then the subroutine will be named accordingly, referenced by the appropriate glob.

    "name" is a string, giving a sigilless symbol name. For "/newCONSTSUB", "name" is NUL-terminated, interpreted as Latin-1.

    For "/newCONSTSUB_flags", "name" has length "len" bytes, hence may contain embedded NULs. It is interpreted as UTF-8 if "flags" has the "SVf_UTF8" bit set, and Latin-1 otherwise. "flags" should not have bits set other than "SVf_UTF8".

    The name may be either qualified or unqualified. If the name is unqualified then it defaults to being in the stash specified by "stash" if that is non-null, or to "PL_curstash" if "stash" is null. The symbol is always added to the stash if necessary, with "GV_ADDMULTI" semantics.

    If there is already a subroutine of the specified name, then the new sub will replace the existing one in the glob. A warning may be generated about the redefinition.

    If the subroutine has one of a few special names, such as "BEGIN" or "END", then it will be claimed by the appropriate queue for automatic running of phase-related subroutines. In this case the relevant glob will be left not containing any subroutine, even if it did contain one before. Execution of the subroutine will likely be a no-op, unless "sv" was a tied array or the caller modified the subroutine in some interesting way before it was executed. In the case of "BEGIN", the treatment is buggy: the sub will be executed when only half built, and may be deleted prematurely, possibly causing a crash.

    The function returns a pointer to the constructed subroutine. If the sub is anonymous then ownership of one counted reference to the subroutine is transferred to the caller. If the sub is named then the caller does not get ownership of a reference. In most such cases, where the sub has a non-phase name, the sub will be alive at the point it is returned by virtue of being contained in the glob that names it. A phase-named subroutine will usually be alive by virtue of the reference owned by the phase's automatic run queue. A "BEGIN" subroutine may have been destroyed already by the time this function returns, but currently bugs occur in that case before the caller gets control. It is the caller's responsibility to ensure that it knows which of these situations applies.

     CV *       newCONSTSUB      (      HV *stash, const char *name,
                                        SV *sv)
     CV *  Perl_newCONSTSUB      (pTHX_ HV *stash, const char *name,
                                        SV *sv)
     CV *       newCONSTSUB_flags(      HV *stash, const char *name,
                                        STRLEN len, U32 flags, SV *sv)
     CV *  Perl_newCONSTSUB_flags(pTHX_ HV *stash, const char *name,
                                        STRLEN len, U32 flags, SV *sv)

"newCVREF"
    Constructs, checks, and returns a code reference op.

     OP *       newCVREF(      I32 flags, OP *o)
     OP *  Perl_newCVREF(pTHX_ I32 flags, OP *o)

"newDEFEROP"
    NOTE: "newDEFEROP" is experimental and may change or be removed without notice.

    Constructs and returns a deferred-block statement that implements the "defer" semantics. The "block" optree is consumed by this function and becomes part of the returned optree.

    The "flags" argument carries additional flags to set on the returned op, including the "op_private" field.

     OP *       newDEFEROP(      I32 flags, OP *block)
     OP *  Perl_newDEFEROP(pTHX_ I32 flags, OP *block)

"newDEFSVOP"
    Constructs and returns an op to access $_.

     OP *       newDEFSVOP()
     OP *  Perl_newDEFSVOP(pTHX)

"newFOROP"
    Constructs, checks, and returns an op tree expressing a "foreach" loop (iteration through a list of values). This is a heavyweight loop, with structure that allows exiting the loop by "last" and suchlike.

    "sv" optionally supplies the variable(s) that will be aliased to each item in turn; if null, it defaults to $_. "expr" supplies the list of values to iterate over. "block" supplies the main body of the loop, and "cont" optionally supplies a "continue" block that operates as a second half of the body. All of these optree inputs are consumed by this function and become part of the constructed op tree.

    "flags" gives the eight bits of "op_flags" for the "leaveloop" op and, shifted up eight bits, the eight bits of "op_private" for the "leaveloop" op, except that (in both cases) some bits will be set automatically.

     OP *       newFOROP(      I32 flags, OP *sv, OP *expr, OP *block,
                               OP *cont)
     OP *  Perl_newFOROP(pTHX_ I32 flags, OP *sv, OP *expr, OP *block,
                               OP *cont)

"newGIVENOP"
    Constructs, checks, and returns an op tree expressing a "given" block. "cond" supplies the expression to whose value $_ will be locally aliased, and "block" supplies the body of the "given" construct; they are consumed by this function and become part of the constructed op tree. "defsv_off" must be zero (it used to identity the pad slot of lexical $_).

     OP *       newGIVENOP(      OP *cond, OP *block,
                                 PADOFFSET defsv_off)
     OP *  Perl_newGIVENOP(pTHX_ OP *cond, OP *block,
                                 PADOFFSET defsv_off)

"newGVOP"
    Constructs, checks, and returns an op of any type that involves an embedded reference to a GV. "type" is the opcode. "flags" gives the eight bits of "op_flags". "gv" identifies the GV that the op should reference; calling this function does not transfer ownership of any reference to it.

     OP *       newGVOP(      I32 type, I32 flags, GV *gv)
     OP *  Perl_newGVOP(pTHX_ I32 type, I32 flags, GV *gv)

"newGVREF"
    Constructs, checks, and returns a glob reference op.

     OP *       newGVREF(      I32 type, OP *o)
     OP *  Perl_newGVREF(pTHX_ I32 type, OP *o)

"newHVREF"
    Constructs, checks, and returns a hash reference op.

     OP *       newHVREF(      OP *o)
     OP *  Perl_newHVREF(pTHX_ OP *o)

"newLISTOP"
    Constructs, checks, and returns an op of any list type. "type" is the opcode. "flags" gives the eight bits of "op_flags", except that "OPf_KIDS" will be set automatically if required. "first" and "last" supply up to two ops to be direct children of the list op; they are consumed by this function and become part of the constructed op tree.

    For most list operators, the check function expects all the kid ops to be present already, so calling "newLISTOP(OP_JOIN, ...)" (e.g.) is not appropriate. What you want to do in that case is create an op of type "OP_LIST", append more children to it, and then call "op_convert_list". See "op_convert_list" for more information.

    If a compiletime-known fixed list of child ops is required, the "newLISTOPn" function can be used as a convenient shortcut, avoiding the need to create a temporary plain "OP_LIST" in a new variable.

     OP *       newLISTOP(      I32 type, I32 flags, OP *first,
                                OP *last)
     OP *  Perl_newLISTOP(pTHX_ I32 type, I32 flags, OP *first,
                                OP *last)

"newLISTOPn"
    Constructs, checks, and returns an op of any list type. "type" is the opcode. "flags" gives the eight bits of "op_flags", except that "OPf_KIDS" will be set automatically if required. The variable number of arguments after "flags" must all be OP pointers, terminated by a final "NULL" pointer. These will all be consumed as direct children of the list op and become part of the constructed op tree.

    Do not forget to end the arguments list with a "NULL" pointer.

    This function is useful as a shortcut to performing the sequence of newLISTOP(), op_append_elem() on each element and final op_convert_list() in the case where a compiletime-known fixed sequence of child ops is required. If a variable number of elements are required, or for splicing in an entire sub-list of child ops, see instead "newLISTOP" and "op_convert_list".

     OP *       newLISTOPn(      I32 type, I32 flags, ...)
     OP *  Perl_newLISTOPn(pTHX_ I32 type, I32 flags, ...)

"newLOGOP"
    Constructs, checks, and returns a logical (flow control) op. "type" is the opcode. "flags" gives the eight bits of "op_flags", except that "OPf_KIDS" will be set automatically, and, shifted up eight bits, the eight bits of "op_private", except that the bit with value 1 is automatically set. "first" supplies the expression controlling the flow, and "other" supplies the side (alternate) chain of ops; they are consumed by this function and become part of the constructed op tree.

     OP *       newLOGOP(      I32 optype, I32 flags, OP *first,
                               OP *other)
     OP *  Perl_newLOGOP(pTHX_ I32 optype, I32 flags, OP *first,
                               OP *other)

"newLOOPEX"
    Constructs, checks, and returns a loop-exiting op (such as "goto" or "last"). "type" is the opcode. "label" supplies the parameter determining the target of the op; it is consumed by this function and becomes part of the constructed op tree.

     OP *       newLOOPEX(      I32 type, OP *label)
     OP *  Perl_newLOOPEX(pTHX_ I32 type, OP *label)

"newLOOPOP"
    Constructs, checks, and returns an op tree expressing a loop. This is only a loop in the control flow through the op tree; it does not have the heavyweight loop structure that allows exiting the loop by "last" and suchlike. "flags" gives the eight bits of "op_flags" for the top-level op, except that some bits will be set automatically as required. "expr" supplies the expression controlling loop iteration, and "block" supplies the body of the loop; they are consumed by this function and become part of the constructed op tree. "debuggable" is currently unused and should always be 1.

     OP *       newLOOPOP(      I32 flags, I32 debuggable, OP *expr,
                                OP *block)
     OP *  Perl_newLOOPOP(pTHX_ I32 flags, I32 debuggable, OP *expr,
                                OP *block)

"newMETHOP"
    Constructs, checks, and returns an op of method type with a method name evaluated at runtime. "type" is the opcode. "flags" gives the eight bits of "op_flags", except that "OPf_KIDS" will be set automatically, and, shifted up eight bits, the eight bits of "op_private", except that the bit with value 1 is automatically set. "dynamic_meth" supplies an op which evaluates method name; it is consumed by this function and become part of the constructed op tree. Supported optypes: "OP_METHOD".

     OP *       newMETHOP(      I32 type, I32 flags, OP *dynamic_meth)
     OP *  Perl_newMETHOP(pTHX_ I32 type, I32 flags, OP *dynamic_meth)

"newMETHOP_named"
    Constructs, checks, and returns an op of method type with a constant method name. "type" is the opcode. "flags" gives the eight bits of "op_flags", and, shifted up eight bits, the eight bits of "op_private". "const_meth" supplies a constant method name; it must be a shared COW string. Supported optypes: "OP_METHOD_NAMED".

     OP *       newMETHOP_named(      I32 type, I32 flags,
                                      SV * const_meth)
     OP *  Perl_newMETHOP_named(pTHX_ I32 type, I32 flags,
                                      SV * const_meth)

"newNULLLIST"
    Constructs, checks, and returns a new "stub" op, which represents an empty list expression.

     OP *       newNULLLIST()
     OP *  Perl_newNULLLIST(pTHX)

"newOP"
    Constructs, checks, and returns an op of any base type (any type that has no extra fields). "type" is the opcode. "flags" gives the eight bits of "op_flags", and, shifted up eight bits, the eight bits of "op_private".

     OP *       newOP(      I32 optype, I32 flags)
     OP *  Perl_newOP(pTHX_ I32 optype, I32 flags)

"newPADOP"
    Constructs, checks, and returns an op of any type that involves a reference to a pad element. "type" is the opcode. "flags" gives the eight bits of "op_flags". A pad slot is automatically allocated, and is populated with "sv"; this function takes ownership of one reference to it.

    This function only exists if Perl has been compiled to use ithreads.

     OP *       newPADOP(      I32 type, I32 flags, SV *sv)
     OP *  Perl_newPADOP(pTHX_ I32 type, I32 flags, SV *sv)

"newPMOP"
    Constructs, checks, and returns an op of any pattern matching type. "type" is the opcode. "flags" gives the eight bits of "op_flags" and, shifted up eight bits, the eight bits of "op_private".

     OP *       newPMOP(      I32 type, I32 flags)
     OP *  Perl_newPMOP(pTHX_ I32 type, I32 flags)

"newPVOP"
    Constructs, checks, and returns an op of any type that involves an embedded C-level pointer (PV). "type" is the opcode. "flags" gives the eight bits of "op_flags". "pv" supplies the C-level pointer. Depending on the op type, the memory referenced by "pv" may be freed when the op is destroyed. If the op is of a freeing type, "pv" must have been allocated using "PerlMemShared_malloc".

     OP *       newPVOP(      I32 type, I32 flags, char *pv)
     OP *  Perl_newPVOP(pTHX_ I32 type, I32 flags, char *pv)

"newRANGE"
    Constructs and returns a "range" op, with subordinate "flip" and "flop" ops. "flags" gives the eight bits of "op_flags" for the "flip" op and, shifted up eight bits, the eight bits of "op_private" for both the "flip" and "range" ops, except that the bit with value 1 is automatically set. "left" and "right" supply the expressions controlling the endpoints of the range; they are consumed by this function and become part of the constructed op tree.

     OP *       newRANGE(      I32 flags, OP *left, OP *right)
     OP *  Perl_newRANGE(pTHX_ I32 flags, OP *left, OP *right)

"newSLICEOP"
    Constructs, checks, and returns an "lslice" (list slice) op. "flags" gives the eight bits of "op_flags", except that "OPf_KIDS" will be set automatically, and, shifted up eight bits, the eight bits of "op_private", except that the bit with value 1 or 2 is automatically set as required. "listval" and "subscript" supply the parameters of the slice; they are consumed by this function and become part of the constructed op tree.

     OP *       newSLICEOP(      I32 flags, OP *subscript, OP *listop)
     OP *  Perl_newSLICEOP(pTHX_ I32 flags, OP *subscript, OP *listop)

"newSTATEOP"
    Constructs a state op (COP). The state op is normally a "nextstate" op, but will be a "dbstate" op if debugging is enabled for currently-compiled code. The state op is populated from "PL_curcop" (or "PL_compiling"). If "label" is non-null, it supplies the name of a label to attach to the state op; this function takes ownership of the memory pointed at by "label", and will free it. "flags" gives the eight bits of "op_flags" for the state op.

    If "o" is null, the state op is returned. Otherwise the state op is combined with "o" into a "lineseq" list op, which is returned. "o" is consumed by this function and becomes part of the returned op tree.

     OP *       newSTATEOP(      I32 flags, char *label, OP *o)
     OP *  Perl_newSTATEOP(pTHX_ I32 flags, char *label, OP *o)

"newSUB"
    Construct a Perl subroutine without attributes, and also performing some surrounding jobs, returning a pointer to the constructed subroutine.

    This is the same as ""newATTRSUB_x"" in perlintern with its "o_is_gv" parameter set to FALSE, and its "attrs" parameter to NULL. This means that if "o" is null, the new sub will be anonymous; otherwise the name will be derived from "o" in the way described (as with all other details) in ""newATTRSUB_x"" in perlintern.

     CV *       newSUB(      I32 floor, OP *o, OP *proto, OP *block)
     CV *  Perl_newSUB(pTHX_ I32 floor, OP *o, OP *proto, OP *block)

"newSVOP"
    Constructs, checks, and returns an op of any type that involves an embedded SV. "type" is the opcode. "flags" gives the eight bits of "op_flags". "sv" gives the SV to embed in the op; this function takes ownership of one reference to it.

     OP *       newSVOP(      I32 type, I32 flags, SV *sv)
     OP *  Perl_newSVOP(pTHX_ I32 type, I32 flags, SV *sv)

"newSVREF"
    Constructs, checks, and returns a scalar reference op.

     OP *       newSVREF(      OP *o)
     OP *  Perl_newSVREF(pTHX_ OP *o)

"newTRYCATCHOP"
    NOTE: "newTRYCATCHOP" is experimental and may change or be removed without notice.

    Constructs and returns a conditional execution statement that implements the "try"/"catch" semantics. First the op tree in "tryblock" is executed, inside a context that traps exceptions. If an exception occurs then the optree in "catchblock" is executed, with the trapped exception set into the lexical variable given by "catchvar" (which must be an op of type "OP_PADSV"). All the optrees are consumed by this function and become part of the returned op tree.

    The "flags" argument is currently ignored.

     OP *       newTRYCATCHOP(      I32 flags, OP *tryblock,
                                    OP *catchvar, OP *catchblock)
     OP *  Perl_newTRYCATCHOP(pTHX_ I32 flags, OP *tryblock,
                                    OP *catchvar, OP *catchblock)

"newUNOP"
    Constructs, checks, and returns an op of any unary type. "type" is the opcode. "flags" gives the eight bits of "op_flags", except that "OPf_KIDS" will be set automatically if required, and, shifted up eight bits, the eight bits of "op_private", except that the bit with value 1 is automatically set. "first" supplies an optional op to be the direct child of the unary op; it is consumed by this function and become part of the constructed op tree.

     OP *       newUNOP(      I32 type, I32 flags, OP *first)
     OP *  Perl_newUNOP(pTHX_ I32 type, I32 flags, OP *first)

"newUNOP_AUX"
    Similar to "newUNOP", but creates an "UNOP_AUX" struct instead, with "op_aux" initialised to "aux"

     OP *       newUNOP_AUX(      I32 type, I32 flags, OP *first,
                                  UNOP_AUX_item *aux)
     OP *  Perl_newUNOP_AUX(pTHX_ I32 type, I32 flags, OP *first,
                                  UNOP_AUX_item *aux)

"newWHENOP"
    Constructs, checks, and returns an op tree expressing a "when" block. "cond" supplies the test expression, and "block" supplies the block that will be executed if the test evaluates to true; they are consumed by this function and become part of the constructed op tree. "cond" will be interpreted DWIMically, often as a comparison against $_, and may be null to generate a "default" block.

     OP *       newWHENOP(      OP *cond, OP *block)
     OP *  Perl_newWHENOP(pTHX_ OP *cond, OP *block)

"newWHILEOP"
    Constructs, checks, and returns an op tree expressing a "while" loop. This is a heavyweight loop, with structure that allows exiting the loop by "last" and suchlike.

    "loop" is an optional preconstructed "enterloop" op to use in the loop; if it is null then a suitable op will be constructed automatically. "expr" supplies the loop's controlling expression. "block" supplies the main body of the loop, and "cont" optionally supplies a "continue" block that operates as a second half of the body. All of these optree inputs are consumed by this function and become part of the constructed op tree.

    "flags" gives the eight bits of "op_flags" for the "leaveloop" op and, shifted up eight bits, the eight bits of "op_private" for the "leaveloop" op, except that (in both cases) some bits will be set automatically. "debuggable" is currently unused and should always be 1. "has_my" can be supplied as true to force the loop body to be enclosed in its own scope.

     OP *       newWHILEOP(      I32 flags, I32 debuggable,
                                 LOOP *loop, OP *expr, OP *block,
                                 OP *cont, I32 has_my)
     OP *  Perl_newWHILEOP(pTHX_ I32 flags, I32 debuggable,
                                 LOOP *loop, OP *expr, OP *block,
                                 OP *cont, I32 has_my)

"newXS"
    Used by "xsubpp" to hook up XSUBs as Perl subs. "filename" needs to be static storage, as it is used directly as CvFILE(), without a copy being made.

"OA_BASEOP"
"OA_BINOP"
"OA_COP"
"OA_LISTOP"
"OA_LOGOP"
"OA_LOOP"
"OA_PADOP"
"OA_PMOP"
"OA_PVOP_OR_SVOP"
"OA_SVOP"
"OA_UNOP"
"OP"
    Described in perlguts.

"op_append_elem"
    Append an item to the list of ops contained directly within a list-type op, returning the lengthened list. "first" is the list-type op, and "last" is the op to append to the list. "optype" specifies the intended opcode for the list. If "first" is not already a list of the right type, it will be upgraded into one. If either "first" or "last" is null, the other is returned unchanged.

     OP *       op_append_elem(      I32 optype, OP *first, OP *last)
     OP *  Perl_op_append_elem(pTHX_ I32 optype, OP *first, OP *last)

"op_append_list"
    Concatenate the lists of ops contained directly within two list-type ops, returning the combined list. "first" and "last" are the list-type ops to concatenate. "optype" specifies the intended opcode for the list. If either "first" or "last" is not already a list of the right type, it will be upgraded into one. If either "first" or "last" is null, the other is returned unchanged.

     OP *       op_append_list(      I32 optype, OP *first, OP *last)
     OP *  Perl_op_append_list(pTHX_ I32 optype, OP *first, OP *last)

"OP_CLASS"
    Return the class of the provided OP: that is, which of the *OP structures it uses. For core ops this currently gets the information out of "PL_opargs", which does not always accurately reflect the type used; in v5.26 onwards, see also the function "op_class" which can do a better job of determining the used type.

    For custom ops the type is returned from the registration, and it is up to the registree to ensure it is accurate. The value returned will be one of the "OA_"* constants from op.h.

     U32  OP_CLASS(OP *o)

"op_contextualize"
    Applies a syntactic context to an op tree representing an expression. "o" is the op tree, and "context" must be "G_SCALAR", "G_LIST", or "G_VOID" to specify the context to apply. The modified op tree is returned.

     OP *       op_contextualize(      OP *o, I32 context)
     OP *  Perl_op_contextualize(pTHX_ OP *o, I32 context)

"op_convert_list"
    Converts "o" into a list op if it is not one already, and then converts it into the specified "type", calling its check function, allocating a target if it needs one, and folding constants.

    A list-type op is usually constructed one kid at a time via "newLISTOP", "op_prepend_elem" and "op_append_elem". Then finally it is passed to "op_convert_list" to make it the right type.

     OP *       op_convert_list(      I32 optype, I32 flags, OP *o)
     OP *  Perl_op_convert_list(pTHX_ I32 optype, I32 flags, OP *o)

"OP_DESC"
    Return a short description of the provided OP.

     const char *  OP_DESC(OP *o)

"op_force_list"
    Promotes o and any siblings to be an "OP_LIST" if it is not already. If a new "OP_LIST" op was created, its first child will be "OP_PUSHMARK". The returned node itself will be nulled, leaving only its children.

    This is often what you want to do before putting the optree into list context; as

        o = op_contextualize(op_force_list(o), G_LIST);

     OP *       op_force_list(      OP *o)
     OP *  Perl_op_force_list(pTHX_ OP *o)

"op_free"
    Free an op and its children. Only use this when an op is no longer linked to from any optree.

    Remember that any op with "OPf_KIDS" set is expected to have a valid "op_first" pointer. If you are attempting to free an op but preserve its child op, make sure to clear that flag before calling op_free(). For example:

        OP *kid = o->op_first; o->op_first = NULL;
        o->op_flags &= ~OPf_KIDS;
        op_free(o);

     void       op_free(      OP *arg)
     void  Perl_op_free(pTHX_ OP *arg)

"op_linklist"
    This function is the implementation of the "LINKLIST" macro. It should not be called directly.

     OP *       op_linklist(      OP *o)
     OP *  Perl_op_linklist(pTHX_ OP *o)

"op_lvalue"
    NOTE: "op_lvalue" is experimental and may change or be removed without notice.

    Propagate lvalue ("modifiable") context to an op and its children. "type" represents the context type, roughly based on the type of op that would do the modifying, although local() is represented by "OP_NULL", because it has no op type of its own (it is signalled by a flag on the lvalue op).

    This function detects things that can't be modified, such as "$x+1", and generates errors for them. For example, "$x+1 = 2" would cause it to be called with an op of type "OP_ADD" and a "type" argument of "OP_SASSIGN".

    It also flags things that need to behave specially in an lvalue context, such as "$$x = 5" which might have to vivify a reference in $x.

     OP *  op_lvalue(OP *o, I32 type)

"OP_NAME"
    Return the name of the provided OP. For core ops this looks up the name from the op_type; for custom ops from the op_ppaddr.

     const char *  OP_NAME(OP *o)

"op_null"
    Neutralizes an op when it is no longer needed, but is still linked to from other ops.

     void       op_null(      OP *o)
     void  Perl_op_null(pTHX_ OP *o)

"op_parent"
    Returns the parent OP of "o", if it has a parent. Returns "NULL" otherwise.

     OP *       op_parent(OP *o)
     OP *  Perl_op_parent(OP *o)

"op_prepend_elem"
    Prepend an item to the list of ops contained directly within a list-type op, returning the lengthened list. "first" is the op to prepend to the list, and "last" is the list-type op. "optype" specifies the intended opcode for the list. If "last" is not already a list of the right type, it will be upgraded into one. If either "first" or "last" is null, the other is returned unchanged.

     OP *       op_prepend_elem(      I32 optype, OP *first, OP *last)
     OP *  Perl_op_prepend_elem(pTHX_ I32 optype, OP *first, OP *last)

"op_scope"
    NOTE: "op_scope" is experimental and may change or be removed without notice.

    Wraps up an op tree with some additional ops so that at runtime a dynamic scope will be created. The original ops run in the new dynamic scope, and then, provided that they exit normally, the scope will be unwound. The additional ops used to create and unwind the dynamic scope will normally be an "enter"/"leave" pair, but a "scope" op may be used instead if the ops are simple enough to not need the full dynamic scope structure.

     OP *       op_scope(      OP *o)
     OP *  Perl_op_scope(pTHX_ OP *o)

"op_sibling_splice"
    A general function for editing the structure of an existing chain of op_sibling nodes. By analogy with the perl-level splice() function, allows you to delete zero or more sequential nodes, replacing them with zero or more different nodes. Performs the necessary op_first/op_last housekeeping on the parent node and op_sibling manipulation on the children. The last deleted node will be marked as the last node by updating the op_sibling/op_sibparent or op_moresib field as appropriate.

    Note that op_next is not manipulated, and nodes are not freed; that is the responsibility of the caller. It also won't create a new list op for an empty list etc; use higher-level functions like op_append_elem() for that.

    "parent" is the parent node of the sibling chain. It may passed as "NULL" if the splicing doesn't affect the first or last op in the chain.

    "start" is the node preceding the first node to be spliced. Node(s) following it will be deleted, and ops will be inserted after it. If it is "NULL", the first node onwards is deleted, and nodes are inserted at the beginning.

    "del_count" is the number of nodes to delete. If zero, no nodes are deleted. If -1 or greater than or equal to the number of remaining kids, all remaining kids are deleted.

    "insert" is the first of a chain of nodes to be inserted in place of the nodes. If "NULL", no nodes are inserted.

    The head of the chain of deleted ops is returned, or "NULL" if no ops were deleted.

    For example:

        action                    before      after         returns
        ------                    -----       -----         -------

                                  P           P
        splice(P, A, 2, X-Y-Z)    |           |             B-C
                                  A-B-C-D     A-X-Y-Z-D

                                  P           P
        splice(P, NULL, 1, X-Y)   |           |             A
                                  A-B-C-D     X-Y-B-C-D

                                  P           P
        splice(P, NULL, 3, NULL)  |           |             A-B-C
                                  A-B-C-D     D

                                  P           P
        splice(P, B, 0, X-Y)      |           |             NULL
                                  A-B-C-D     A-B-X-Y-C-D

    For lower-level direct manipulation of "op_sibparent" and "op_moresib", see "OpMORESIB_set", "OpLASTSIB_set", "OpMAYBESIB_set".

     OP *       op_sibling_splice(      OP *parent, OP *start,
                                        int del_count, OP *insert)
     OP *  Perl_op_sibling_splice(pTHX_ OP *parent, OP *start,
                                        int del_count, OP *insert)

"OP_TYPE_IS"
    Returns true if the given OP is not a "NULL" pointer and if it is of the given type.

    The negation of this macro, "OP_TYPE_ISNT" is also available as well as "OP_TYPE_IS_NN" and "OP_TYPE_ISNT_NN" which elide the NULL pointer check.

     bool  OP_TYPE_IS(OP *o, Optype type)

"OP_TYPE_IS_OR_WAS"
    Returns true if the given OP is not a NULL pointer and if it is of the given type or used to be before being replaced by an OP of type OP_NULL.

    The negation of this macro, "OP_TYPE_ISNT_AND_WASNT" is also available as well as "OP_TYPE_IS_OR_WAS_NN" and "OP_TYPE_ISNT_AND_WASNT_NN" which elide the "NULL" pointer check.

     bool  OP_TYPE_IS_OR_WAS(OP *o, Optype type)

"op_wrap_finally"
    NOTE: "op_wrap_finally" is experimental and may change or be removed without notice.

    Wraps the given "block" optree fragment in its own scoped block, arranging for the "finally" optree fragment to be invoked when leaving that block for any reason. Both optree fragments are consumed and the combined result is returned.

     OP *       op_wrap_finally(      OP *block, OP *finally)
     OP *  Perl_op_wrap_finally(pTHX_ OP *block, OP *finally)

"opcode"
    An enum of all the legal Perl opcodes, defined in opnames.h

"OpHAS_SIBLING"
    Returns true if "o" has a sibling

     bool  OpHAS_SIBLING(OP *o)

"OpLASTSIB_set"
    Marks "o" as having no further siblings and marks o as having the specified parent. See also "OpMORESIB_set" and "OpMAYBESIB_set". For a higher-level interface, see "op_sibling_splice".

     void  OpLASTSIB_set(OP *o, OP *parent)

"OpMAYBESIB_set"
    Conditionally does "OpMORESIB_set" or "OpLASTSIB_set" depending on whether "sib" is non-null. For a higher-level interface, see "op_sibling_splice".

     void  OpMAYBESIB_set(OP *o, OP *sib, OP *parent)

"OpMORESIB_set"
    Sets the sibling of "o" to the non-zero value "sib". See also "OpLASTSIB_set" and "OpMAYBESIB_set". For a higher-level interface, see "op_sibling_splice".

     void  OpMORESIB_set(OP *o, OP *sib)

"OpSIBLING"
    Returns the sibling of "o", or "NULL" if there is no sibling

     OP*  OpSIBLING(OP *o)

"optimize_optree"
    This function applies some optimisations to the optree in top-down order. It is called before the peephole optimizer, which processes ops in execution order. Note that finalize_optree() also does a top-down scan, but is called *after* the peephole optimizer.

     void       optimize_optree(      OP *o)
     void  Perl_optimize_optree(pTHX_ OP *o)

"peep_t"
"Perl_cpeep_t"
    Described in perlguts.

"PL_opfreehook"
    When non-"NULL", the function pointed by this variable will be called each time an OP is freed with the corresponding OP as the argument. This allows extensions to free any extra attribute they have locally attached to an OP. It is also assured to first fire for the parent OP and then for its kids.

    When you replace this variable, it is considered a good practice to store the possibly previously installed hook and that you recall it inside your own.

    On threaded perls, each thread has an independent copy of this variable; each initialized at creation time with the current value of the creating thread's copy.

     Perl_ophook_t  PL_opfreehook

"PL_peepp"
    Pointer to the per-subroutine peephole optimiser. This is a function that gets called at the end of compilation of a Perl subroutine (or equivalently independent piece of Perl code) to perform fixups of some ops and to perform small-scale optimisations. The function is called once for each subroutine that is compiled, and is passed, as sole parameter, a pointer to the op that is the entry point to the subroutine. It modifies the op tree in place.

    The peephole optimiser should never be completely replaced. Rather, add code to it by wrapping the existing optimiser. The basic way to do this can be seen in "Compile pass 3: peephole optimization" in perlguts. If the new code wishes to operate on ops throughout the subroutine's structure, rather than just at the top level, it is likely to be more convenient to wrap the "PL_rpeepp" hook.

    On threaded perls, each thread has an independent copy of this variable; each initialized at creation time with the current value of the creating thread's copy.

     peep_t  PL_peepp

"PL_rpeepp"
    Pointer to the recursive peephole optimiser. This is a function that gets called at the end of compilation of a Perl subroutine (or equivalently independent piece of Perl code) to perform fixups of some ops and to perform small-scale optimisations. The function is called once for each chain of ops linked through their "op_next" fields; it is recursively called to handle each side chain. It is passed, as sole parameter, a pointer to the op that is at the head of the chain. It modifies the op tree in place.

    The peephole optimiser should never be completely replaced. Rather, add code to it by wrapping the existing optimiser. The basic way to do this can be seen in "Compile pass 3: peephole optimization" in perlguts. If the new code wishes to operate only on ops at a subroutine's top level, rather than throughout the structure, it is likely to be more convenient to wrap the "PL_peepp" hook.

    On threaded perls, each thread has an independent copy of this variable; each initialized at creation time with the current value of the creating thread's copy.

     peep_t  PL_rpeepp

"PMOP"
    Described in perlguts.

"rv2cv_op_cv"
    Examines an op, which is expected to identify a subroutine at runtime, and attempts to determine at compile time which subroutine it identifies. This is normally used during Perl compilation to determine whether a prototype can be applied to a function call. "cvop" is the op being considered, normally an "rv2cv" op. A pointer to the identified subroutine is returned, if it could be determined statically, and a null pointer is returned if it was not possible to determine statically.

    Currently, the subroutine can be identified statically if the RV that the "rv2cv" is to operate on is provided by a suitable "gv" or "const" op. A "gv" op is suitable if the GV's CV slot is populated. A "const" op is suitable if the constant value must be an RV pointing to a CV. Details of this process may change in future versions of Perl. If the "rv2cv" op has the "OPpENTERSUB_AMPER" flag set then no attempt is made to identify the subroutine statically: this flag is used to suppress compile-time magic on a subroutine call, forcing it to use default runtime behaviour.

    If "flags" has the bit "RV2CVOPCV_MARK_EARLY" set, then the handling of a GV reference is modified. If a GV was examined and its CV slot was found to be empty, then the "gv" op has the "OPpEARLY_CV" flag set. If the op is not optimised away, and the CV slot is later populated with a subroutine having a prototype, that flag eventually triggers the warning "called too early to check prototype".

    If "flags" has the bit "RV2CVOPCV_RETURN_NAME_GV" set, then instead of returning a pointer to the subroutine it returns a pointer to the GV giving the most appropriate name for the subroutine in this context. Normally this is just the "CvGV" of the subroutine, but for an anonymous ("CvANON") subroutine that is referenced through a GV it will be the referencing GV. The resulting "GV*" is cast to "CV*" to be returned. A null pointer is returned as usual if there is no statically-determinable subroutine.

     CV *       rv2cv_op_cv(      OP *cvop, U32 flags)
     CV *  Perl_rv2cv_op_cv(pTHX_ OP *cvop, U32 flags)

"UNOP"
"XOP"
    Described in perlguts.

Pack and Unpack

"packlist"
    The engine implementing pack() Perl function.

     void       packlist(      SV *cat, const char *pat,
                               const char *patend, SV **beglist,
                               SV **endlist)
     void  Perl_packlist(pTHX_ SV *cat, const char *pat,
                               const char *patend, SV **beglist,
                               SV **endlist)

"unpackstring"
    The engine implementing the unpack() Perl function.

    Using the template "pat..patend", this function unpacks the string "s..strend" into a number of mortal SVs, which it pushes onto the perl argument (@_) stack (so you will need to issue a "PUTBACK" before and "SPAGAIN" after the call to this function). It returns the number of pushed elements.

    The "strend" and "patend" pointers should point to the byte following the last character of each string.

    Although this function returns its values on the perl argument stack, it doesn't take any parameters from that stack (and thus in particular there's no need to do a "PUSHMARK" before calling it, unlike "call_pv" for example).

     SSize_t       unpackstring(      const char *pat,
                                      const char *patend,
                                      const char *s,
                                      const char *strend, U32 flags)
     SSize_t  Perl_unpackstring(pTHX_ const char *pat,
                                      const char *patend,
                                      const char *s,
                                      const char *strend, U32 flags)

Pad Data Structures

"CvPADLIST"
    NOTE: "CvPADLIST" is experimental and may change or be removed without notice.

    CV's can have CvPADLIST(cv) set to point to a PADLIST. This is the CV's scratchpad, which stores lexical variables and opcode temporary and per-thread values.

    For these purposes "formats" are a kind-of CV; eval""s are too (except they're not callable at will and are always thrown away after the eval"" is done executing). Require'd files are simply evals without any outer lexical scope.

    XSUBs do not have a "CvPADLIST". "dXSTARG" fetches values from "PL_curpad", but that is really the callers pad (a slot of which is allocated by every entersub). Do not get or set "CvPADLIST" if a CV is an XSUB (as determined by CvISXSUB()), "CvPADLIST" slot is reused for a different internal purpose in XSUBs.

    The PADLIST has a C array where pads are stored.

    The 0th entry of the PADLIST is a PADNAMELIST which represents the "names" or rather the "static type information" for lexicals. The individual elements of a PADNAMELIST are PADNAMEs. Future refactorings might stop the PADNAMELIST from being stored in the PADLIST's array, so don't rely on it. See "PadlistNAMES".

    The CvDEPTH'th entry of a PADLIST is a PAD (an AV) which is the stack frame at that depth of recursion into the CV. The 0th slot of a frame AV is an AV which is @_. Other entries are storage for variables and op targets.

    Iterating over the PADNAMELIST iterates over all possible pad items. Pad slots for targets ("SVs_PADTMP") and GVs end up having &PL_padname_undef "names", while slots for constants have &PL_padname_const "names" (see "pad_alloc"). That &PL_padname_undef and &PL_padname_const are used is an implementation detail subject to change. To test for them, use "!PadnamePV(name)" and "PadnamePV(name) && !PadnameLEN(name)", respectively.

    Only "my"/"our" variable slots get valid names. The rest are op targets/GVs/constants which are statically allocated or resolved at compile time. These don't have names by which they can be looked up from Perl code at run time through eval"" the way "my"/"our" variables can be. Since they can't be looked up by "name" but only by their index allocated at compile time (which is usually in "PL_op->op_targ"), wasting a name SV for them doesn't make sense.

    The pad names in the PADNAMELIST have their PV holding the name of the variable. The "COP_SEQ_RANGE_LOW" and "_HIGH" fields form a range (low+1..high inclusive) of cop_seq numbers for which the name is valid. During compilation, these fields may hold the special value PERL_PADSEQ_INTRO to indicate various stages:

     COP_SEQ_RANGE_LOW        _HIGH
     -----------------        -----
     PERL_PADSEQ_INTRO            0   variable not yet introduced:
                                      { my ($x
     valid-seq#   PERL_PADSEQ_INTRO   variable in scope:
                                      { my ($x);
     valid-seq#          valid-seq#   compilation of scope complete:
                                      { my ($x); .... }

    When a lexical var hasn't yet been introduced, it already exists from the perspective of duplicate declarations, but not for variable lookups, e.g.

        my ($x, $x); # '"my" variable $x masks earlier declaration'
        my $x = $x;  # equal to my $x = $::x;

    For typed lexicals "PadnameTYPE" points at the type stash. For "our" lexicals, "PadnameOURSTASH" points at the stash of the associated global (so that duplicate "our" declarations in the same package can be detected). "PadnameGEN" is sometimes used to store the generation number during compilation.

    If "PadnameOUTER" is set on the pad name, then that slot in the frame AV is a REFCNT'ed reference to a lexical from "outside". Such entries are sometimes referred to as 'fake'. In this case, the name does not use 'low' and 'high' to store a cop_seq range, since it is in scope throughout. Instead 'high' stores some flags containing info about the real lexical (is it declared in an anon, and is it capable of being instantiated multiple times?), and for fake ANONs, 'low' contains the index within the parent's pad where the lexical's value is stored, to make cloning quicker.

    If the 'name' is "&" the corresponding entry in the PAD is a CV representing a possible closure.

    Note that formats are treated as anon subs, and are cloned each time write is called (if necessary).

    The flag "SVs_PADSTALE" is cleared on lexicals each time the my() is executed, and set on scope exit. This allows the "Variable $x is not available" warning to be generated in evals, such as

        { my $x = 1; sub f { eval '$x'} } f();

    For state vars, "SVs_PADSTALE" is overloaded to mean 'not yet initialised', but this internal state is stored in a separate pad entry.

     PADLIST *  CvPADLIST(CV *cv)

"pad_add_name_pvs"
    Exactly like "pad_add_name_pvn", but takes a literal string instead of a string/length pair.

     PADOFFSET  pad_add_name_pvs("name", U32 flags, HV *typestash,
                                 HV *ourstash)

"pad_new"
    Create a new padlist, updating the global variables for the currently-compiling padlist to point to the new padlist. The following flags can be OR'ed together:

        padnew_CLONE        this pad is for a cloned CV
        padnew_SAVE         save old globals on the save stack
        padnew_SAVESUB      also save extra stuff for start of sub

     PADLIST *       pad_new(      int flags)
     PADLIST *  Perl_pad_new(pTHX_ int flags)

"PadARRAY"
    NOTE: "PadARRAY" is experimental and may change or be removed without notice.

    The C array of pad entries.

     SV **  PadARRAY(PAD * pad)

"PadlistARRAY"
    NOTE: "PadlistARRAY" is experimental and may change or be removed without notice.

    The C array of a padlist, containing the pads. Only subscript it with numbers >= 1, as the 0th entry is not guaranteed to remain usable.

     PAD **  PadlistARRAY(PADLIST * padlist)

"PadlistMAX"
    NOTE: "PadlistMAX" is experimental and may change or be removed without notice.

    The index of the last allocated space in the padlist. Note that the last pad may be in an earlier slot. Any entries following it will be "NULL" in that case.

     SSize_t  PadlistMAX(PADLIST * padlist)

"PadlistNAMES"
    NOTE: "PadlistNAMES" is experimental and may change or be removed without notice.

    The names associated with pad entries.

     PADNAMELIST *  PadlistNAMES(PADLIST * padlist)

"PadlistNAMESARRAY"
    NOTE: "PadlistNAMESARRAY" is experimental and may change or be removed without notice.

    The C array of pad names.

     PADNAME **  PadlistNAMESARRAY(PADLIST * padlist)

"PadlistNAMESMAX"
    NOTE: "PadlistNAMESMAX" is experimental and may change or be removed without notice.

    The index of the last pad name.

     SSize_t  PadlistNAMESMAX(PADLIST * padlist)

"PadlistREFCNT"
    NOTE: "PadlistREFCNT" is experimental and may change or be removed without notice.

    The reference count of the padlist. Currently this is always 1.

     U32  PadlistREFCNT(PADLIST * padlist)

"PadMAX"
    NOTE: "PadMAX" is experimental and may change or be removed without notice.

    The index of the last pad entry.

     SSize_t  PadMAX(PAD * pad)

"PadnameLEN"
    NOTE: "PadnameLEN" is experimental and may change or be removed without notice.

    The length of the name.

     STRLEN  PadnameLEN(PADNAME * pn)

"PadnamelistARRAY"
    NOTE: "PadnamelistARRAY" is experimental and may change or be removed without notice.

    The C array of pad names.

     PADNAME **  PadnamelistARRAY(PADNAMELIST * pnl)

"PadnamelistMAX"
    NOTE: "PadnamelistMAX" is experimental and may change or be removed without notice.

    The index of the last pad name.

     SSize_t  PadnamelistMAX(PADNAMELIST * pnl)

"PadnamelistREFCNT"
    NOTE: "PadnamelistREFCNT" is experimental and may change or be removed without notice.

    The reference count of the pad name list.

     SSize_t  PadnamelistREFCNT(PADNAMELIST * pnl)

"PadnamelistREFCNT_dec"
    NOTE: "PadnamelistREFCNT_dec" is experimental and may change or be removed without notice.

    Lowers the reference count of the pad name list.

     void  PadnamelistREFCNT_dec(PADNAMELIST * pnl)

"PadnamePV"
    NOTE: "PadnamePV" is experimental and may change or be removed without notice.

    The name stored in the pad name struct. This returns "NULL" for a target slot.

     char *  PadnamePV(PADNAME * pn)

"PadnameREFCNT"
    NOTE: "PadnameREFCNT" is experimental and may change or be removed without notice.

    The reference count of the pad name.

     SSize_t  PadnameREFCNT(PADNAME * pn)

"PadnameREFCNT_dec"
    NOTE: "PadnameREFCNT_dec" is experimental and may change or be removed without notice.

    Lowers the reference count of the pad name.

     void  PadnameREFCNT_dec(PADNAME * pn)

"PadnameREFCNT_inc"
    NOTE: "PadnameREFCNT_inc" is experimental and may change or be removed without notice.

    Increases the reference count of the pad name. Returns the pad name itself.

     PADNAME *  PadnameREFCNT_inc(PADNAME * pn)

"PadnameSV"
    NOTE: "PadnameSV" is experimental and may change or be removed without notice.

    Returns the pad name as a mortal SV.

     SV *  PadnameSV(PADNAME * pn)

"PadnameUTF8"
    NOTE: "PadnameUTF8" is experimental and may change or be removed without notice.

    Whether PadnamePV is in UTF-8. Currently, this is always true.

     bool  PadnameUTF8(PADNAME * pn)

"PL_comppad"
    NOTE: "PL_comppad" is experimental and may change or be removed without notice.

    During compilation, this points to the array containing the values part of the pad for the currently-compiling code. (At runtime a CV may have many such value arrays; at compile time just one is constructed.) At runtime, this points to the array containing the currently-relevant values for the pad for the currently-executing code.

"PL_comppad_name"
    NOTE: "PL_comppad_name" is experimental and may change or be removed without notice.

    During compilation, this points to the array containing the names part of the pad for the currently-compiling code.

"PL_curpad"
    NOTE: "PL_curpad" is experimental and may change or be removed without notice.

    Points directly to the body of the "PL_comppad" array. (I.e., this is PadARRAY(PL_comppad).)

"SVs_PADMY"
"SVs_PADTMP"
    "DEPRECATED!" It is planned to remove "SVs_PADMY" from a future release of Perl. Do not use it for new code; remove it from existing code.

    Described in perlguts.

Password and Group access

"GRPASSWD"
    This symbol, if defined, indicates to the C program that "struct group" in grp.h contains "gr_passwd".

"HAS_ENDGRENT"
    This symbol, if defined, indicates that the getgrent routine is available for finalizing sequential access of the group database.

"HAS_ENDGRENT_R"
    This symbol, if defined, indicates that the "endgrent_r" routine is available to endgrent re-entrantly.

"HAS_ENDPWENT"
    This symbol, if defined, indicates that the "endpwent" routine is available for finalizing sequential access of the passwd database.

"HAS_ENDPWENT_R"
    This symbol, if defined, indicates that the "endpwent_r" routine is available to endpwent re-entrantly.

"HAS_GETGRENT"
    This symbol, if defined, indicates that the "getgrent" routine is available for sequential access of the group database.

"HAS_GETGRENT_R"
    This symbol, if defined, indicates that the "getgrent_r" routine is available to getgrent re-entrantly.

"HAS_GETPWENT"
    This symbol, if defined, indicates that the "getpwent" routine is available for sequential access of the passwd database. If this is not available, the older getpw() function may be available.

"HAS_GETPWENT_R"
    This symbol, if defined, indicates that the "getpwent_r" routine is available to getpwent re-entrantly.

"HAS_SETGRENT"
    This symbol, if defined, indicates that the "setgrent" routine is available for initializing sequential access of the group database.

"HAS_SETGRENT_R"
    This symbol, if defined, indicates that the "setgrent_r" routine is available to setgrent re-entrantly.

"HAS_SETPWENT"
    This symbol, if defined, indicates that the "setpwent" routine is available for initializing sequential access of the passwd database.

"HAS_SETPWENT_R"
    This symbol, if defined, indicates that the "setpwent_r" routine is available to setpwent re-entrantly.

"PWAGE"
    This symbol, if defined, indicates to the C program that "struct passwd" contains "pw_age".

"PWCHANGE"
    This symbol, if defined, indicates to the C program that "struct passwd" contains "pw_change".

"PWCLASS"
    This symbol, if defined, indicates to the C program that "struct passwd" contains "pw_class".

"PWCOMMENT"
    This symbol, if defined, indicates to the C program that "struct passwd" contains "pw_comment".

"PWEXPIRE"
    This symbol, if defined, indicates to the C program that "struct passwd" contains "pw_expire".

"PWGECOS"
    This symbol, if defined, indicates to the C program that "struct passwd" contains "pw_gecos".

"PWPASSWD"
    This symbol, if defined, indicates to the C program that "struct passwd" contains "pw_passwd".

"PWQUOTA"
    This symbol, if defined, indicates to the C program that "struct passwd" contains "pw_quota".

Paths to system commands

"CSH"
    This symbol, if defined, contains the full pathname of csh.

"LOC_SED"
    This symbol holds the complete pathname to the sed program.

"SH_PATH"
    This symbol contains the full pathname to the shell used on this on this system to execute Bourne shell scripts. Usually, this will be /bin/sh, though it's possible that some systems will have /bin/ksh, /bin/pdksh, /bin/ash, /bin/bash, or even something such as D:/bin/sh.exe.

Prototype information

"CRYPT_R_PROTO"
    This symbol encodes the prototype of "crypt_r". It is zero if "d_crypt_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_crypt_r" is defined.

"CTERMID_R_PROTO"
    This symbol encodes the prototype of "ctermid_r". It is zero if "d_ctermid_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_ctermid_r" is defined.

"DRAND48_R_PROTO"
    This symbol encodes the prototype of "drand48_r". It is zero if "d_drand48_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_drand48_r" is defined.

"ENDGRENT_R_PROTO"
    This symbol encodes the prototype of "endgrent_r". It is zero if "d_endgrent_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_endgrent_r" is defined.

"ENDHOSTENT_R_PROTO"
    This symbol encodes the prototype of "endhostent_r". It is zero if "d_endhostent_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_endhostent_r" is defined.

"ENDNETENT_R_PROTO"
    This symbol encodes the prototype of "endnetent_r". It is zero if "d_endnetent_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_endnetent_r" is defined.

"ENDPROTOENT_R_PROTO"
    This symbol encodes the prototype of "endprotoent_r". It is zero if "d_endprotoent_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_endprotoent_r" is defined.

"ENDPWENT_R_PROTO"
    This symbol encodes the prototype of "endpwent_r". It is zero if "d_endpwent_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_endpwent_r" is defined.

"ENDSERVENT_R_PROTO"
    This symbol encodes the prototype of "endservent_r". It is zero if "d_endservent_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_endservent_r" is defined.

"GDBM_NDBM_H_USES_PROTOTYPES"
    This symbol, if defined, indicates that <gdbm-ndbm.h> uses real "ANSI" C prototypes instead of K&R style function declarations without any parameter information. While "ANSI" C prototypes are supported in C++, K&R style function declarations will yield errors.

"GDBMNDBM_H_USES_PROTOTYPES"
    This symbol, if defined, indicates that gdbm/ndbm.h uses real "ANSI" C prototypes instead of K&R style function declarations without any parameter information. While "ANSI" C prototypes are supported in C++, K&R style function declarations will yield errors.

"GETGRENT_R_PROTO"
    This symbol encodes the prototype of "getgrent_r". It is zero if "d_getgrent_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_getgrent_r" is defined.

"GETGRGID_R_PROTO"
    This symbol encodes the prototype of "getgrgid_r". It is zero if "d_getgrgid_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_getgrgid_r" is defined.

"GETGRNAM_R_PROTO"
    This symbol encodes the prototype of "getgrnam_r". It is zero if "d_getgrnam_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_getgrnam_r" is defined.

"GETHOSTBYADDR_R_PROTO"
    This symbol encodes the prototype of "gethostbyaddr_r". It is zero if "d_gethostbyaddr_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_gethostbyaddr_r" is defined.

"GETHOSTBYNAME_R_PROTO"
    This symbol encodes the prototype of "gethostbyname_r". It is zero if "d_gethostbyname_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_gethostbyname_r" is defined.

"GETHOSTENT_R_PROTO"
    This symbol encodes the prototype of "gethostent_r". It is zero if "d_gethostent_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_gethostent_r" is defined.

"GETLOGIN_R_PROTO"
    This symbol encodes the prototype of "getlogin_r". It is zero if "d_getlogin_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_getlogin_r" is defined.

"GETNETBYADDR_R_PROTO"
    This symbol encodes the prototype of "getnetbyaddr_r". It is zero if "d_getnetbyaddr_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_getnetbyaddr_r" is defined.

"GETNETBYNAME_R_PROTO"
    This symbol encodes the prototype of "getnetbyname_r". It is zero if "d_getnetbyname_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_getnetbyname_r" is defined.

"GETNETENT_R_PROTO"
    This symbol encodes the prototype of "getnetent_r". It is zero if "d_getnetent_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_getnetent_r" is defined.

"GETPROTOBYNAME_R_PROTO"
    This symbol encodes the prototype of "getprotobyname_r". It is zero if "d_getprotobyname_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_getprotobyname_r" is defined.

"GETPROTOBYNUMBER_R_PROTO"
    This symbol encodes the prototype of "getprotobynumber_r". It is zero if "d_getprotobynumber_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_getprotobynumber_r" is defined.

"GETPROTOENT_R_PROTO"
    This symbol encodes the prototype of "getprotoent_r". It is zero if "d_getprotoent_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_getprotoent_r" is defined.

"GETPWENT_R_PROTO"
    This symbol encodes the prototype of "getpwent_r". It is zero if "d_getpwent_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_getpwent_r" is defined.

"GETPWNAM_R_PROTO"
    This symbol encodes the prototype of "getpwnam_r". It is zero if "d_getpwnam_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_getpwnam_r" is defined.

"GETPWUID_R_PROTO"
    This symbol encodes the prototype of "getpwuid_r". It is zero if "d_getpwuid_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_getpwuid_r" is defined.

"GETSERVBYNAME_R_PROTO"
    This symbol encodes the prototype of "getservbyname_r". It is zero if "d_getservbyname_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_getservbyname_r" is defined.

"GETSERVBYPORT_R_PROTO"
    This symbol encodes the prototype of "getservbyport_r". It is zero if "d_getservbyport_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_getservbyport_r" is defined.

"GETSERVENT_R_PROTO"
    This symbol encodes the prototype of "getservent_r". It is zero if "d_getservent_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_getservent_r" is defined.

"GETSPNAM_R_PROTO"
    This symbol encodes the prototype of "getspnam_r". It is zero if "d_getspnam_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_getspnam_r" is defined.

"HAS_DBMINIT_PROTO"
    This symbol, if defined, indicates that the system provides a prototype for the dbminit() function. Otherwise, it is up to the program to supply one. A good guess is

     extern int dbminit(char *);

"HAS_DRAND48_PROTO"
    This symbol, if defined, indicates that the system provides a prototype for the drand48() function. Otherwise, it is up to the program to supply one. A good guess is

     extern double drand48(void);

"HAS_FLOCK_PROTO"
    This symbol, if defined, indicates that the system provides a prototype for the flock() function. Otherwise, it is up to the program to supply one. A good guess is

     extern int flock(int, int);

"HAS_GETHOST_PROTOS"
    This symbol, if defined, indicates that netdb.h includes prototypes for gethostent(), gethostbyname(), and gethostbyaddr(). Otherwise, it is up to the program to guess them. See netdbtype.U (part of metaconfig) for probing for various "Netdb_xxx_t" types.

"HAS_GETNET_PROTOS"
    This symbol, if defined, indicates that netdb.h includes prototypes for getnetent(), getnetbyname(), and getnetbyaddr(). Otherwise, it is up to the program to guess them. See netdbtype.U (part of metaconfig) for probing for various "Netdb_xxx_t" types.

"HAS_GETPROTO_PROTOS"
    This symbol, if defined, indicates that netdb.h includes prototypes for getprotoent(), getprotobyname(), and getprotobyaddr(). Otherwise, it is up to the program to guess them. See netdbtype.U (part of metaconfig) for probing for various "Netdb_xxx_t" types.

"HAS_GETSERV_PROTOS"
    This symbol, if defined, indicates that netdb.h includes prototypes for getservent(), getservbyname(), and getservbyaddr(). Otherwise, it is up to the program to guess them. See netdbtype.U (part of metaconfig) for probing for various "Netdb_xxx_t" types.

"HAS_MODFL_PROTO"
    This symbol, if defined, indicates that the system provides a prototype for the modfl() function. Otherwise, it is up to the program to supply one.

"HAS_SBRK_PROTO"
    This symbol, if defined, indicates that the system provides a prototype for the sbrk() function. Otherwise, it is up to the program to supply one. Good guesses are

     extern void* sbrk(int);
     extern void* sbrk(size_t);

"HAS_SETRESGID_PROTO"
    This symbol, if defined, indicates that the system provides a prototype for the setresgid() function. Otherwise, it is up to the program to supply one. Good guesses are

     extern int setresgid(uid_t ruid, uid_t euid, uid_t suid);

"HAS_SETRESUID_PROTO"
    This symbol, if defined, indicates that the system provides a prototype for the setresuid() function. Otherwise, it is up to the program to supply one. Good guesses are

     extern int setresuid(uid_t ruid, uid_t euid, uid_t suid);

"HAS_SHMAT_PROTOTYPE"
    This symbol, if defined, indicates that the sys/shm.h includes a prototype for shmat(). Otherwise, it is up to the program to guess one. "Shmat_t" "shmat(int, Shmat_t, int)" is a good guess, but not always right so it should be emitted by the program only when "HAS_SHMAT_PROTOTYPE" is not defined to avoid conflicting defs.

"HAS_SOCKATMARK_PROTO"
    This symbol, if defined, indicates that the system provides a prototype for the sockatmark() function. Otherwise, it is up to the program to supply one. A good guess is

     extern int sockatmark(int);

"HAS_SYSCALL_PROTO"
    This symbol, if defined, indicates that the system provides a prototype for the syscall() function. Otherwise, it is up to the program to supply one. Good guesses are

     extern int syscall(int,  ...);
     extern int syscall(long, ...);

"HAS_TELLDIR_PROTO"
    This symbol, if defined, indicates that the system provides a prototype for the telldir() function. Otherwise, it is up to the program to supply one. A good guess is

     extern long telldir(DIR*);

"NDBM_H_USES_PROTOTYPES"
    This symbol, if defined, indicates that ndbm.h uses real "ANSI" C prototypes instead of K&R style function declarations without any parameter information. While "ANSI" C prototypes are supported in C++, K&R style function declarations will yield errors.

"RANDOM_R_PROTO"
    This symbol encodes the prototype of "random_r". It is zero if "d_random_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_random_r" is defined.

"READDIR_R_PROTO"
    This symbol encodes the prototype of "readdir_r". It is zero if "d_readdir_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_readdir_r" is defined.

"SETGRENT_R_PROTO"
    This symbol encodes the prototype of "setgrent_r". It is zero if "d_setgrent_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_setgrent_r" is defined.

"SETHOSTENT_R_PROTO"
    This symbol encodes the prototype of "sethostent_r". It is zero if "d_sethostent_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_sethostent_r" is defined.

"SETLOCALE_R_PROTO"
    This symbol encodes the prototype of "setlocale_r". It is zero if "d_setlocale_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_setlocale_r" is defined.

"SETNETENT_R_PROTO"
    This symbol encodes the prototype of "setnetent_r". It is zero if "d_setnetent_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_setnetent_r" is defined.

"SETPROTOENT_R_PROTO"
    This symbol encodes the prototype of "setprotoent_r". It is zero if "d_setprotoent_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_setprotoent_r" is defined.

"SETPWENT_R_PROTO"
    This symbol encodes the prototype of "setpwent_r". It is zero if "d_setpwent_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_setpwent_r" is defined.

"SETSERVENT_R_PROTO"
    This symbol encodes the prototype of "setservent_r". It is zero if "d_setservent_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_setservent_r" is defined.

"SRANDOM_R_PROTO"
    This symbol encodes the prototype of "srandom_r". It is zero if "d_srandom_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_srandom_r" is defined.

"SRAND48_R_PROTO"
    This symbol encodes the prototype of "srand48_r". It is zero if "d_srand48_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_srand48_r" is defined.

"STRERROR_R_PROTO"
    This symbol encodes the prototype of "strerror_r". It is zero if "d_strerror_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_strerror_r" is defined.

"TMPNAM_R_PROTO"
    This symbol encodes the prototype of "tmpnam_r". It is zero if "d_tmpnam_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_tmpnam_r" is defined.

"TTYNAME_R_PROTO"
    This symbol encodes the prototype of "ttyname_r". It is zero if "d_ttyname_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_ttyname_r" is defined.

Reference-counted stack manipulation
Functions for pushing and pulling items on the stack when the stack is reference counted. They are intended as replacements for the old PUSHs, POPi, EXTEND etc pp macros within pp functions.

"rpp_context"
    NOTE: "rpp_context" is experimental and may change or be removed without notice.

    Impose void, scalar or list context on the stack. First, pop "extra" items off the stack, then when "gimme" is: "G_LIST": return as-is. "G_VOID": pop everything back to "mark" "G_SCALAR": move the top stack item (or &PL_sv_undef if none) to "mark+1" and free everything above it.

     void       rpp_context(      SV **mark, U8 gimme, SSize_t extra)
     void  Perl_rpp_context(pTHX_ SV **mark, U8 gimme, SSize_t extra)

"rpp_extend"
    NOTE: "rpp_extend" is experimental and may change or be removed without notice.

    Ensures that there is space on the stack to push "n" items, extending it if necessary.

     void       rpp_extend(      SSize_t n)
     void  Perl_rpp_extend(pTHX_ SSize_t n)

"rpp_invoke_xs"
    NOTE: "rpp_invoke_xs" is experimental and may change or be removed without notice.

    Call the XS function associated with "cv". Wraps the call if necessary to handle XS functions which are not aware of reference-counted stacks.

     void       rpp_invoke_xs(      CV *cv)
     void  Perl_rpp_invoke_xs(pTHX_ CV *cv)

"rpp_is_lone"
    NOTE: "rpp_is_lone" is experimental and may change or be removed without notice.

    Indicates whether the stacked SV "sv" (assumed to be not yet popped off the stack) is only kept alive due to a single reference from the argument stack and/or and the temps stack.

    This can used for example to decide whether the copying of return values in rvalue context can be skipped, or whether it shouldn't be assigned to in lvalue context.

     bool       rpp_is_lone(      SV *sv)
     bool  Perl_rpp_is_lone(pTHX_ SV *sv)

"rpp_pop_1_norc"
    NOTE: "rpp_pop_1_norc" is experimental and may change or be removed without notice.

    Pop and return the top item off the argument stack and update "PL_stack_sp". It's similar to rpp_popfree_1(), except that it actually returns a value, and it doesn't decrement the SV's reference count. On non-"PERL_RC_STACK" builds it actually increments the SV's reference count.

    This is useful in cases where the popped value is immediately embedded somewhere e.g. via av_store(), allowing you skip decrementing and then immediately incrementing the reference count again (and risk prematurely freeing the SV if it had a RC of 1). On non-RC builds, the reference count bookkeeping still works too, which is why it should be used rather than a simple "*PL_stack_sp--".

     SV *       rpp_pop_1_norc()
     SV *  Perl_rpp_pop_1_norc(pTHX)

"rpp_popfree_to"
    NOTE: "rpp_popfree_to" is experimental and may change or be removed without notice.

    Pop and free all items on the argument stack above "sp". On return, "PL_stack_sp" will be equal to "sp".

     void       rpp_popfree_to(      SV **sp)
     void  Perl_rpp_popfree_to(pTHX_ SV **sp)

"rpp_popfree_to_NN"
    NOTE: "rpp_popfree_to_NN" is experimental and may change or be removed without notice.

    A variant of rpp_popfree_to() which assumes that all the pointers being popped off the stack are non-NULL.

     void       rpp_popfree_to_NN(      SV **sp)
     void  Perl_rpp_popfree_to_NN(pTHX_ SV **sp)

"rpp_popfree_1"
    NOTE: "rpp_popfree_1" is experimental and may change or be removed without notice.

    Pop and free the top item on the argument stack and update "PL_stack_sp".

     void       rpp_popfree_1()
     void  Perl_rpp_popfree_1(pTHX)

"rpp_popfree_1_NN"
    NOTE: "rpp_popfree_1_NN" is experimental and may change or be removed without notice.

    A variant of rpp_popfree_1() which assumes that the pointer being popped off the stack is non-NULL.

     void       rpp_popfree_1_NN()
     void  Perl_rpp_popfree_1_NN(pTHX)

"rpp_popfree_2"
    NOTE: "rpp_popfree_2" is experimental and may change or be removed without notice.

    Pop and free the top two items on the argument stack and update "PL_stack_sp".

     void       rpp_popfree_2()
     void  Perl_rpp_popfree_2(pTHX)

"rpp_popfree_2_NN"
    NOTE: "rpp_popfree_2_NN" is experimental and may change or be removed without notice.

    A variant of rpp_popfree_2() which assumes that the two pointers being popped off the stack are non-NULL.

     void       rpp_popfree_2_NN()
     void  Perl_rpp_popfree_2_NN(pTHX)

"rpp_push_1"
"rpp_push_IMM"
"rpp_push_2"
"rpp_xpush_1"
"rpp_xpush_IMM"
"rpp_xpush_2"
    NOTE: all these forms are experimental and may change or be removed without notice.

    Push one or two SVs onto the stack, incrementing their reference counts and updating "PL_stack_sp". With the "x" variants, it extends the stack first. The "IMM" variants assume that the single argument is an immortal such as <&PL_sv_undef> and, for efficiency, will skip incrementing its reference count.

     void       rpp_push_1   (      SV *sv)
     void  Perl_rpp_push_1   (pTHX_ SV *sv)
     void       rpp_push_IMM (      SV *sv)
     void  Perl_rpp_push_IMM (pTHX_ SV *sv)
     void       rpp_push_2   (      SV *sv1, SV *sv2)
     void  Perl_rpp_push_2   (pTHX_ SV *sv1, SV *sv2)
     void       rpp_xpush_1  (      SV *sv)
     void  Perl_rpp_xpush_1  (pTHX_ SV *sv)
     void       rpp_xpush_IMM(      SV *sv)
     void  Perl_rpp_xpush_IMM(pTHX_ SV *sv)
     void       rpp_xpush_2  (      SV *sv1, SV *sv2)
     void  Perl_rpp_xpush_2  (pTHX_ SV *sv1, SV *sv2)

"rpp_push_1_norc"
    NOTE: "rpp_push_1_norc" is experimental and may change or be removed without notice.

    Push "sv" onto the stack without incrementing its reference count, and update "PL_stack_sp". On non-PERL_RC_STACK builds, mortalise too.

    This is most useful where an SV has just been created and already has a reference count of 1, but has not yet been anchored anywhere.

     void       rpp_push_1_norc(      SV *sv)
     void  Perl_rpp_push_1_norc(pTHX_ SV *sv)

"rpp_push_2*"
    Described under "rpp_push_1"

"rpp_replace_at"
    NOTE: "rpp_replace_at" is experimental and may change or be removed without notice.

    Replace the SV at address sp within the stack with "sv", while suitably adjusting reference counts. Equivalent to "*sp = sv", except with proper reference count handling.

     void       rpp_replace_at(      SV **sp, SV *sv)
     void  Perl_rpp_replace_at(pTHX_ SV **sp, SV *sv)

"rpp_replace_at_NN"
    NOTE: "rpp_replace_at_NN" is experimental and may change or be removed without notice.

    A variant of rpp_replace_at() which assumes that the SV pointer on the stack is non-NULL.

     void       rpp_replace_at_NN(      SV **sp, SV *sv)
     void  Perl_rpp_replace_at_NN(pTHX_ SV **sp, SV *sv)

"rpp_replace_at_norc"
    NOTE: "rpp_replace_at_norc" is experimental and may change or be removed without notice.

    Replace the SV at address sp within the stack with "sv", while suitably adjusting the reference count of the old SV. Equivalent to "*sp = sv", except with proper reference count handling.

    "sv"'s reference count doesn't get incremented. On non-"PERL_RC_STACK" builds, it gets mortalised too.

    This is most useful where an SV has just been created and already has a reference count of 1, but has not yet been anchored anywhere.

     void       rpp_replace_at_norc(      SV **sp, SV *sv)
     void  Perl_rpp_replace_at_norc(pTHX_ SV **sp, SV *sv)

"rpp_replace_at_norc_NN"
    NOTE: "rpp_replace_at_norc_NN" is experimental and may change or be removed without notice.

    A variant of rpp_replace_at_norc() which assumes that the SV pointer on the stack is non-NULL.

     void       rpp_replace_at_norc_NN(      SV **sp, SV *sv)
     void  Perl_rpp_replace_at_norc_NN(pTHX_ SV **sp, SV *sv)

"rpp_replace_1_1"
"rpp_replace_1_1_NN"
"rpp_replace_1_IMM_NN"
    NOTE: all these forms are experimental and may change or be removed without notice.

    Replace the current top stack item with "sv", while suitably adjusting reference counts. Equivalent to rpp_popfree_1(); rpp_push_1(sv), but is more efficient and handles both SVs being the same.

    The "_NN" variant assumes that the pointer on the stack to the SV being freed is non-NULL.

    The "IMM_NN" variant is like the "_NN" variant, but in addition, assumes that the single argument is an immortal such as <&PL_sv_undef> and, for efficiency, will skip incrementing its reference count.

     void       rpp_replace_1_1     (      SV *sv)
     void  Perl_rpp_replace_1_1     (pTHX_ SV *sv)
     void       rpp_replace_1_1_NN  (      SV *sv)
     void  Perl_rpp_replace_1_1_NN  (pTHX_ SV *sv)
     void       rpp_replace_1_IMM_NN(      SV *sv)
     void  Perl_rpp_replace_1_IMM_NN(pTHX_ SV *sv)

"rpp_replace_2_1"
"rpp_replace_2_1_NN"
"rpp_replace_2_IMM_NN"
    NOTE: all these forms are experimental and may change or be removed without notice.

    Replace the current top to stacks item with "sv", while suitably adjusting reference counts. Equivalent to rpp_popfree_2(); rpp_push_1(sv), but is more efficient and handles SVs being the same.

    The "_NN" variant assumes that the pointers on the stack to the SVs being freed are non-NULL.

    The "IMM_NN" variant is like the "_NN" variant, but in addition, assumes that the single argument is an immortal such as <&PL_sv_undef> and, for efficiency, will skip incrementing its reference count.

     void       rpp_replace_2_1     (      SV *sv)
     void  Perl_rpp_replace_2_1     (pTHX_ SV *sv)
     void       rpp_replace_2_1_NN  (      SV *sv)
     void  Perl_rpp_replace_2_1_NN  (pTHX_ SV *sv)
     void       rpp_replace_2_IMM_NN(      SV *sv)
     void  Perl_rpp_replace_2_IMM_NN(pTHX_ SV *sv)

"rpp_stack_is_rc"
    NOTE: "rpp_stack_is_rc" is experimental and may change or be removed without notice.

    Returns a boolean value indicating whether the stack is currently reference-counted. Note that if the stack is split (bottom half RC, top half non-RC), this function returns false, even if the top half currently contains zero items.

     bool       rpp_stack_is_rc()
     bool  Perl_rpp_stack_is_rc(pTHX)

"rpp_try_AMAGIC_1"
"rpp_try_AMAGIC_2"
    NOTE: both forms are experimental and may change or be removed without notice.

    Check whether either of the one or two SVs at the top of the stack is magical or a ref, and in either case handle it specially: invoke get magic, call an overload method, or replace a ref with a temporary numeric value, as appropriate. If this function returns true, it indicates that the correct return value is already on the stack. Intended to be used at the beginning of the PP function for unary or binary ops.

     bool       rpp_try_AMAGIC_1(      int method, int flags)
     bool  Perl_rpp_try_AMAGIC_1(pTHX_ int method, int flags)
     bool       rpp_try_AMAGIC_2(      int method, int flags)
     bool  Perl_rpp_try_AMAGIC_2(pTHX_ int method, int flags)

"rpp_xpush_IMM*"
"rpp_xpush_1*"
"rpp_xpush_2*"
    Described under "rpp_push_1"

"XSPP_wrapped"
    NOTE: "XSPP_wrapped" is experimental and may change or be removed without notice.

    Declare and wrap a non-reference-counted PP-style function. On traditional perl builds where the stack isn't reference-counted, this just produces a function declaration like

      OP * xsppw_name(pTHX)

    Conversely, in ref-counted builds it creates xsppw_name() as a small wrapper function which calls the real function via a wrapper which processes the args and return values to ensure that reference counts are properly handled for code which uses old-style dSP, PUSHs(), POPs() etc, which don't adjust the reference counts of the items they manipulate.

    xsppw_nargs indicates how many arguments the function consumes off the stack. It can be a constant value or an expression, such as

        ((PL_op->op_flags & OPf_STACKED) ? 2 : 1)

    Alternatively if xsppw_nlists is 1, it indicates that the PP function consumes a list (or - rarely - if 2, consumes two lists, like pp_aassign()), as indicated by the top markstack position.

    This is intended as a temporary fix when converting XS code to run under PERL_RC_STACK builds. In the longer term, the PP function should be rewritten to replace PUSHs() etc with rpp_push_1() etc.

       XSPP_wrapped(xsppw_name, I32 xsppw_nargs, I32 xsppw_nlists)

REGEXP Functions

"pregcomp"
"pregexec"
    Described in perlreguts.

     REGEXP *       pregcomp(      SV * const pattern,
                                   const U32 flags)
     REGEXP *  Perl_pregcomp(pTHX_ SV * const pattern,
                                   const U32 flags)
     I32            pregexec(      REGEXP * const prog,
                                   char *stringarg, char *strend,
                                   char *strbeg, SSize_t minend,
                                   SV *screamer, U32 nosave)
     I32       Perl_pregexec(pTHX_ REGEXP * const prog,
                                   char *stringarg, char *strend,
                                   char *strbeg, SSize_t minend,
                                   SV *screamer, U32 nosave)

"re_compile"
    Compile the regular expression pattern "pattern", returning a pointer to the compiled object for later matching with the internal regex engine.

    This function is typically used by a custom regexp engine ".comp()" function to hand off to the core regexp engine those patterns it doesn't want to handle itself (typically passing through the same flags it was called with). In almost all other cases, a regexp should be compiled by calling ""pregcomp"" to compile using the currently active regexp engine.

    If "pattern" is already a "REGEXP", this function does nothing but return a pointer to the input. Otherwise the PV is extracted and treated like a string representing a pattern. See perlre.

    The possible flags for "rx_flags" are documented in perlreapi. Their names all begin with "RXf_".

     REGEXP *       re_compile(      SV * const pattern,
                                     U32 orig_rx_flags)
     REGEXP *  Perl_re_compile(pTHX_ SV * const pattern,
                                     U32 orig_rx_flags)

"re_dup_guts"
    Duplicate a regexp.

    This routine is expected to clone a given regexp structure. It is only compiled under USE_ITHREADS.

    After all of the core data stored in struct regexp is duplicated the "regexp_engine.dupe" method is used to copy any private data stored in the *pprivate pointer. This allows extensions to handle any duplication they need to do.

     void       re_dup_guts(      const REGEXP *sstr, REGEXP *dstr,
                                  CLONE_PARAMS *param)
     void  Perl_re_dup_guts(pTHX_ const REGEXP *sstr, REGEXP *dstr,
                                  CLONE_PARAMS *param)

"REGEX_LOCALE_CHARSET"
"REGEXP"
    Described in perlreapi.

"regexp"
    The regexp/REGEXP struct, see perlreapi for further documentation on the individual fields. The struct is ordered so that the most commonly used fields are placed at the start.

    Any patch that adds items to this struct will need to include changes to sv.c (Perl_re_dup()) and regcomp.c (pregfree()). This involves freeing or cloning items in the regexp's data array based on the data item's type.

"regexp_engine"
    When a regexp is compiled, its "engine" field is then set to point at the appropriate structure, so that when it needs to be used Perl can find the right routines to do so.

    In order to install a new regexp handler, $^H{regcomp} is set to an integer which (when casted appropriately) resolves to one of these structures. When compiling, the "comp" method is executed, and the resulting "regexp" structure's engine field is expected to point back at the same structure.

    The pTHX_ symbol in the definition is a macro used by Perl under threading to provide an extra argument to the routine holding a pointer back to the interpreter that is executing the regexp. So under threading all routines get an extra argument.

"regexp_paren_pair"
    Described in perlreapi.

"regmatch_info"
    Some basic information about the current match that is created by Perl_regexec_flags and then passed to regtry(), regmatch() etc. It is allocated as a local var on the stack, so nothing should be stored in it that needs preserving or clearing up on croak(). For that, see the aux_info and aux_info_eval members of the regmatch_state union.

"REXEC_COPY_SKIP_POST"
"REXEC_COPY_SKIP_PRE"
"REXEC_COPY_STR"
"RX_BUFF_IDX_CARET_FULLMATCH"
"RX_BUFF_IDX_CARET_POSTMATCH"
"RX_BUFF_IDX_CARET_PREMATCH"
"RX_BUFF_IDX_FULLMATCH"
"RX_BUFF_IDX_POSTMATCH"
"RX_BUFF_IDX_PREMATCH"
"RX_MATCH_COPIED"
"RXapif_ALL"
"RXapif_CLEAR"
"RXapif_DELETE"
"RXapif_EXISTS"
"RXapif_FETCH"
"RXapif_FIRSTKEY"
"RXapif_NEXTKEY"
"RXapif_ONE"
"RXapif_REGNAME"
"RXapif_REGNAMES"
"RXapif_REGNAMES_COUNT"
"RXapif_SCALAR"
"RXapif_STORE"
"RXf_NO_INPLACE_SUBST"
"RXf_NULL"
"RXf_SKIPWHITE"
"RXf_SPLIT"
"RXf_START_ONLY"
"RXf_WHITE"
"RXf_PMf_EXTENDED"
"RXf_PMf_FOLD"
"RXf_PMf_KEEPCOPY"
"RXf_PMf_MULTILINE"
"RXf_PMf_SINGLELINE"
"RXf_SKIPWHITE*"
"RXf_SPLIT*"
"RXf_START_ONLY*"
"RXf_WHITE*"
"struct regexp"
"SV_SAVED_COPY"
    Described in perlreapi.

       RX_MATCH_COPIED(const REGEXP * rx_sv)

"SvRX"
    Convenience macro to get the REGEXP from a SV. This is approximately equivalent to the following snippet:

        if (SvMAGICAL(sv))
            mg_get(sv);
        if (SvROK(sv))
            sv = MUTABLE_SV(SvRV(sv));
        if (SvTYPE(sv) == SVt_REGEXP)
            return (REGEXP*) sv;

    "NULL" will be returned if a REGEXP* is not found.

     REGEXP *  SvRX(SV *sv)

"SvRXOK"
    Returns a boolean indicating whether the SV (or the one it references) is a REGEXP.

    If you want to do something with the REGEXP* later use SvRX instead and check for NULL.

     bool  SvRXOK(SV* sv)

Reports and Formats
These are used in the simple report generation feature of Perl. See perlform.

"IoBOTTOM_GV"
"IoBOTTOM_NAME"
"IoFMT_GV"
"IoFMT_NAME"
"IoLINES"
"IoLINES_LEFT"
"IoPAGE"
"IoPAGE_LEN"
"IoTOP_GV"
"IoTOP_NAME"
    Described in perlguts.

     GV *    IoBOTTOM_GV  (IO *io)
     char *  IoBOTTOM_NAME(IO *io)
     GV *    IoFMT_GV     (IO *io)
     char *  IoFMT_NAME   (IO *io)
     IV      IoLINES      (IO *io)
     IV      IoLINES_LEFT (IO *io)
     IV      IoPAGE       (IO *io)
     IV      IoPAGE_LEN   (IO *io)
     GV *    IoTOP_GV     (IO *io)
     char *  IoTOP_NAME   (IO *io)

Signals

"HAS_SIGINFO_SI_ADDR"
    This symbol, if defined, indicates that "siginfo_t" has the "si_addr" member

"HAS_SIGINFO_SI_BAND"
    This symbol, if defined, indicates that "siginfo_t" has the "si_band" member

"HAS_SIGINFO_SI_ERRNO"
    This symbol, if defined, indicates that "siginfo_t" has the "si_errno" member

"HAS_SIGINFO_SI_PID"
    This symbol, if defined, indicates that "siginfo_t" has the "si_pid" member

"HAS_SIGINFO_SI_STATUS"
    This symbol, if defined, indicates that "siginfo_t" has the "si_status" member

"HAS_SIGINFO_SI_UID"
    This symbol, if defined, indicates that "siginfo_t" has the "si_uid" member

"HAS_SIGINFO_SI_VALUE"
    This symbol, if defined, indicates that "siginfo_t" has the "si_value" member

"PERL_SIGNALS_UNSAFE_FLAG"
    If this bit in "PL_signals" is set, the system is uing the pre-Perl 5.8 unsafe signals. See "PERL_SIGNALS" in perlrun and "Deferred Signals (Safe Signals)" in perlipc.

     U32  PERL_SIGNALS_UNSAFE_FLAG

"rsignal"
    A wrapper for the C library functions sigaction(2) or signal(2). Use this instead of those libc functions, as the Perl version gives the safest available implementation, and knows things that interact with the rest of the perl interpreter.

     Sighandler_t       rsignal(      int i, Sighandler_t t)
     Sighandler_t  Perl_rsignal(pTHX_ int i, Sighandler_t t)

"rsignal_state"
    Returns a the current signal handler for signal "signo". See ""rsignal"".

     Sighandler_t       rsignal_state(      int i)
     Sighandler_t  Perl_rsignal_state(pTHX_ int i)

"SIG_NAME"
    This symbol contains a list of signal names in order of signal number. This is intended to be used as a static array initialization, like this:

     char *sig_name[] = { SIG_NAME };

    The signals in the list are separated with commas, and each signal is surrounded by double quotes. There is no leading "SIG" in the signal name, i.e. "SIGQUIT" is known as ""QUIT"". Gaps in the signal numbers (up to "NSIG") are filled in with "NUMnn", etc., where nn is the actual signal number (e.g. "NUM37"). The signal number for "sig_name[i]" is stored in "sig_num[i]". The last element is 0 to terminate the list with a "NULL". This corresponds to the 0 at the end of the "sig_name_init" list. Note that this variable is initialized from the "sig_name_init", not from "sig_name" (which is unused).

"SIG_NUM"
    This symbol contains a list of signal numbers, in the same order as the "SIG_NAME" list. It is suitable for static array initialization, as in:

     int sig_num[] = { SIG_NUM };

    The signals in the list are separated with commas, and the indices within that list and the "SIG_NAME" list match, so it's easy to compute the signal name from a number or vice versa at the price of a small dynamic linear lookup. Duplicates are allowed, but are moved to the end of the list. The signal number corresponding to "sig_name[i]" is "sig_number[i]". if (i < "NSIG") then "sig_number[i]" == i. The last element is 0, corresponding to the 0 at the end of the "sig_name_init" list. Note that this variable is initialized from the "sig_num_init", not from "sig_num" (which is unused).

"SIG_SIZE"
    This variable contains the number of elements of the "SIG_NAME" and "SIG_NUM" arrays, excluding the final "NULL" entry.

"Sigjmp_buf"
    This is the buffer type to be used with Sigsetjmp and Siglongjmp.

"Siglongjmp"
    This macro is used in the same way as siglongjmp(), but will invoke traditional longjmp() if siglongjmp isn't available. See "HAS_SIGSETJMP".

     void  Siglongjmp(jmp_buf env, int val)

"Sigsetjmp"
    This macro is used in the same way as sigsetjmp(), but will invoke traditional setjmp() if sigsetjmp isn't available. See "HAS_SIGSETJMP".

     int  Sigsetjmp(jmp_buf env, int savesigs)

"whichsig"
"whichsig_pv"
"whichsig_pvn"
"whichsig_sv"
    These all convert a signal name into its corresponding signal number; returning -1 if no corresponding number was found.

    They differ only in the source of the signal name:

    "whichsig_pv" takes the name from the "NUL"-terminated string starting at "sig".

    "whichsig" is merely a different spelling, a synonym, of "whichsig_pv".

    "whichsig_pvn" takes the name from the string starting at "sig", with length "len" bytes.

    "whichsig_sv" takes the name from the PV stored in the SV "sigsv".

     I32       whichsig    (      const char *sig)
     I32       whichsig_pv (      const char *sig)
     I32  Perl_whichsig_pv (pTHX_ const char *sig)
     I32       whichsig_pvn(      const char *sig, STRLEN len)
     I32  Perl_whichsig_pvn(pTHX_ const char *sig, STRLEN len)
     I32       whichsig_sv (      SV *sigsv)
     I32  Perl_whichsig_sv (pTHX_ SV *sigsv)

Site configuration
These variables give details as to where various libraries, installation destinations, etc., go, as well as what various installation options were selected

"ARCHLIB"
    This variable, if defined, holds the name of the directory in which the user wants to put architecture-dependent public library files for perl5. It is most often a local directory such as /usr/local/lib. Programs using this variable must be prepared to deal with filename expansion. If "ARCHLIB" is the same as "PRIVLIB", it is not defined, since presumably the program already searches "PRIVLIB".

"ARCHLIB_EXP"
    This symbol contains the ~name expanded version of "ARCHLIB", to be used in programs that are not prepared to deal with ~ expansion at run-time.

"ARCHNAME"
    This symbol holds a string representing the architecture name. It may be used to construct an architecture-dependant pathname where library files may be held under a private library, for instance.

"BIN"
    This symbol holds the path of the bin directory where the package will be installed. Program must be prepared to deal with ~name substitution.

"BIN_EXP"
    This symbol is the filename expanded version of the "BIN" symbol, for programs that do not want to deal with that at run-time.

"INSTALL_USR_BIN_PERL"
    This symbol, if defined, indicates that Perl is to be installed also as /usr/bin/perl.

"MULTIARCH"
    This symbol, if defined, signifies that the build process will produce some binary files that are going to be used in a cross-platform environment. This is the case for example with the NeXT "fat" binaries that contain executables for several "CPUs".

"PERL_INC_VERSION_LIST"
    This variable specifies the list of subdirectories in over which perl.c:incpush() and lib/lib.pm will automatically search when adding directories to @"INC", in a format suitable for a C initialization string. See the "inc_version_list" entry in Porting/Glossary for more details.

"PERL_OTHERLIBDIRS"
    This variable contains a colon-separated set of paths for the perl binary to search for additional library files or modules. These directories will be tacked to the end of @"INC". Perl will automatically search below each path for version- and architecture-specific directories. See "PERL_INC_VERSION_LIST" for more details.

"PERL_RELOCATABLE_INC"
    This symbol, if defined, indicates that we'd like to relocate entries in @"INC" at run time based on the location of the perl binary.

"PERL_TARGETARCH"
    This symbol, if defined, indicates the target architecture Perl has been cross-compiled to. Undefined if not a cross-compile.

"PERL_USE_DEVEL"
    This symbol, if defined, indicates that Perl was configured with "-Dusedevel", to enable development features. This should not be done for production builds.

"PERL_VENDORARCH"
    If defined, this symbol contains the name of a private library. The library is private in the sense that it needn't be in anyone's execution path, but it should be accessible by the world. It may have a ~ on the front. The standard distribution will put nothing in this directory. Vendors who distribute perl may wish to place their own architecture-dependent modules and extensions in this directory with

     MakeMaker Makefile.PL INSTALLDIRS=vendor

    or equivalent. See INSTALL for details.

"PERL_VENDORARCH_EXP"
    This symbol contains the ~name expanded version of "PERL_VENDORARCH", to be used in programs that are not prepared to deal with ~ expansion at run-time.

"PERL_VENDORLIB_EXP"
    This symbol contains the ~name expanded version of "VENDORLIB", to be used in programs that are not prepared to deal with ~ expansion at run-time.

"PERL_VENDORLIB_STEM"
    This define is "PERL_VENDORLIB_EXP" with any trailing version-specific component removed. The elements in "inc_version_list" ("inc_version_list".U (part of metaconfig)) can be tacked onto this variable to generate a list of directories to search.

"PRIVLIB"
    This symbol contains the name of the private library for this package. The library is private in the sense that it needn't be in anyone's execution path, but it should be accessible by the world. The program should be prepared to do ~ expansion.

"PRIVLIB_EXP"
    This symbol contains the ~name expanded version of "PRIVLIB", to be used in programs that are not prepared to deal with ~ expansion at run-time.

"SITEARCH"
    This symbol contains the name of the private library for this package. The library is private in the sense that it needn't be in anyone's execution path, but it should be accessible by the world. The program should be prepared to do ~ expansion. The standard distribution will put nothing in this directory. After perl has been installed, users may install their own local architecture-dependent modules in this directory with

     MakeMaker Makefile.PL

    or equivalent. See INSTALL for details.

"SITEARCH_EXP"
    This symbol contains the ~name expanded version of "SITEARCH", to be used in programs that are not prepared to deal with ~ expansion at run-time.

"SITELIB"
    This symbol contains the name of the private library for this package. The library is private in the sense that it needn't be in anyone's execution path, but it should be accessible by the world. The program should be prepared to do ~ expansion. The standard distribution will put nothing in this directory. After perl has been installed, users may install their own local architecture-independent modules in this directory with

     MakeMaker Makefile.PL

    or equivalent. See INSTALL for details.

"SITELIB_EXP"
    This symbol contains the ~name expanded version of "SITELIB", to be used in programs that are not prepared to deal with ~ expansion at run-time.

"SITELIB_STEM"
    This define is "SITELIB_EXP" with any trailing version-specific component removed. The elements in "inc_version_list" ("inc_version_list".U (part of metaconfig)) can be tacked onto this variable to generate a list of directories to search.

"STARTPERL"
    This variable contains the string to put in front of a perl script to make sure (one hopes) that it runs with perl and not some shell.

"USE_BSD_GETPGRP"
    This symbol, if defined, indicates that getpgrp needs one arguments whereas "USG" one needs none.

"USE_BSD_SETPGRP"
    This symbol, if defined, indicates that setpgrp needs two arguments whereas "USG" one needs none. See also "HAS_SETPGID" for a "POSIX" interface.

"USE_C_BACKTRACE"
    This symbol, if defined, indicates that Perl should be built with support for backtrace.

"USE_CPLUSPLUS"
    This symbol, if defined, indicates that a C++ compiler was used to compiled Perl and will be used to compile extensions.

"USE_CROSS_COMPILE"
    This symbol, if defined, indicates that Perl is being cross-compiled.

"USE_DTRACE"
    This symbol, if defined, indicates that Perl should be built with support for DTrace.

"USE_DYNAMIC_LOADING"
    This symbol, if defined, indicates that dynamic loading of some sort is available.

"USE_FAST_STDIO"
    This symbol, if defined, indicates that Perl should be built to use 'fast stdio'. Defaults to define in Perls 5.8 and earlier, to undef later.

"USE_ITHREADS"
    This symbol, if defined, indicates that Perl should be built to use the interpreter-based threading implementation.

"USE_KERN_PROC_PATHNAME"
    This symbol, if defined, indicates that we can use sysctl with "KERN_PROC_PATHNAME" to get a full path for the executable, and hence convert $^X to an absolute path.

"USE_LARGE_FILES"
    This symbol, if defined, indicates that large file support should be used when available.

"USE_LONG_DOUBLE"
    This symbol, if defined, indicates that long doubles should be used when available.

"USE_MORE_BITS"
    This symbol, if defined, indicates that 64-bit interfaces and long doubles should be used when available.

"USE_NSGETEXECUTABLEPATH"
    This symbol, if defined, indicates that we can use "_NSGetExecutablePath" and realpath to get a full path for the executable, and hence convert $^X to an absolute path.

"USE_PERLIO"
    This symbol, if defined, indicates that the PerlIO abstraction should be used throughout. If not defined, stdio should be used in a fully backward compatible manner.

"USE_QUADMATH"
    This symbol, if defined, indicates that the quadmath library should be used when available.

"USE_REENTRANT_API"
    This symbol, if defined, indicates that Perl should try to use the various "_r" versions of library functions. This is extremely experimental.

"USE_SEMCTL_SEMID_DS"
    This symbol, if defined, indicates that "struct semid_ds" * is used for semctl "IPC_STAT".

"USE_SEMCTL_SEMUN"
    This symbol, if defined, indicates that "union semun" is used for semctl "IPC_STAT".

"USE_SITECUSTOMIZE"
    This symbol, if defined, indicates that sitecustomize should be used.

"USE_SOCKS"
    This symbol, if defined, indicates that Perl should be built to use socks.

"USE_STAT_BLOCKS"
    This symbol is defined if this system has a stat structure declaring "st_blksize" and "st_blocks".

"USE_STDIO_BASE"
    This symbol is defined if the "_base" field (or similar) of the stdio "FILE" structure can be used to access the stdio buffer for a file handle. If this is defined, then the FILE_base(fp) macro will also be defined and should be used to access this field. Also, the FILE_bufsiz(fp) macro will be defined and should be used to determine the number of bytes in the buffer. "USE_STDIO_BASE" will never be defined unless "USE_STDIO_PTR" is.

"USE_STDIO_PTR"
    This symbol is defined if the "_ptr" and "_cnt" fields (or similar) of the stdio "FILE" structure can be used to access the stdio buffer for a file handle. If this is defined, then the FILE_ptr(fp) and FILE_cnt(fp) macros will also be defined and should be used to access these fields.

"USE_STRICT_BY_DEFAULT"
    This symbol, if defined, enables additional defaults. At this time it only enables implicit strict by default.

"USE_THREADS"
    This symbol, if defined, indicates that Perl should be built to use threads. At present, it is a synonym for and "USE_ITHREADS", but eventually the source ought to be changed to use this to mean "_any_" threading implementation.

"USE_64_BIT_ALL"
    This symbol, if defined, indicates that 64-bit integers should be used when available. If not defined, the native integers will be used (be they 32 or 64 bits). The maximal possible 64-bitness is employed: LP64 or "ILP64", meaning that you will be able to use more than 2 gigabytes of memory. This mode is even more binary incompatible than "USE_64_BIT_INT". You may not be able to run the resulting executable in a 32-bit "CPU" at all or you may need at least to reboot your OS to 64-bit mode.

"USE_64_BIT_INT"
    This symbol, if defined, indicates that 64-bit integers should be used when available. If not defined, the native integers will be employed (be they 32 or 64 bits). The minimal possible 64-bitness is used, just enough to get 64-bit integers into Perl. This may mean using for example "long longs", while your memory may still be limited to 2 gigabytes.

Sockets configuration values

"HAS_SOCKADDR_IN6"
    This symbol, if defined, indicates the availability of "struct sockaddr_in6";

"HAS_SOCKADDR_SA_LEN"
    This symbol, if defined, indicates that the "struct sockaddr" structure has a member called "sa_len", indicating the length of the structure.

"HAS_SOCKADDR_STORAGE"
    This symbol, if defined, indicates the availability of "struct sockaddr_storage";

"HAS_SOCKATMARK"
    This symbol, if defined, indicates that the "sockatmark" routine is available to test whether a socket is at the out-of-band mark.

"HAS_SOCKET"
    This symbol, if defined, indicates that the "BSD" "socket" interface is supported.

"HAS_SOCKETPAIR"
    This symbol, if defined, indicates that the "BSD" socketpair() call is supported.

"HAS_SOCKS5_INIT"
    This symbol, if defined, indicates that the "socks5_init" routine is available to initialize "SOCKS" 5.

"I_SOCKS"
    This symbol, if defined, indicates that socks.h exists and should be included.

     #ifdef I_SOCKS
         #include <socks.h>
     #endif

"I_SYS_SOCKIO"
    This symbol, if defined, indicates the sys/sockio.h should be included to get socket ioctl options, like "SIOCATMARK".

     #ifdef I_SYS_SOCKIO
         #include <sys_sockio.h>
     #endif

Source Filters

"apply_builtin_cv_attributes"
    Given an OP_LIST containing attribute definitions, filter it for known builtin attributes to apply to the cv, returning a possibly-smaller list containing just the remaining ones.

     OP *       apply_builtin_cv_attributes(      CV *cv,
                                                  OP *attrlist)
     OP *  Perl_apply_builtin_cv_attributes(pTHX_ CV *cv,
                                                  OP *attrlist)

"filter_add"
    Described in perlfilter.

     SV *       filter_add(      filter_t funcp, SV *datasv)
     SV *  Perl_filter_add(pTHX_ filter_t funcp, SV *datasv)

"filter_del"
    Delete most recently added instance of the filter function argument

     void       filter_del(      filter_t funcp)
     void  Perl_filter_del(pTHX_ filter_t funcp)

"filter_read"
    Described in perlfilter.

     I32       filter_read(      int idx, SV *buf_sv, int maxlen)
     I32  Perl_filter_read(pTHX_ int idx, SV *buf_sv, int maxlen)

"scan_vstring"
    Returns a pointer to the next character after the parsed vstring, as well as updating the passed in sv.

    Function must be called like

            sv = sv_2mortal(newSV(5));
            s = scan_vstring(s,e,sv);

    where s and e are the start and end of the string. The sv should already be large enough to store the vstring passed in, for performance reasons.

    This function may croak if fatal warnings are enabled in the calling scope, hence the sv_2mortal in the example (to prevent a leak). Make sure to do SvREFCNT_inc afterwards if you use sv_2mortal.

     char *       scan_vstring(      const char *s,
                                     const char * const e, SV *sv)
     char *  Perl_scan_vstring(pTHX_ const char *s,
                                     const char * const e, SV *sv)

"start_subparse"
    Set things up for parsing a subroutine.

    If "is_format" is non-zero, the input is to be considered a format sub (a specialised sub used to implement perl's "format" feature); else a normal "sub".

    "flags" are added to the flags for "PL_compcv". "flags" may include the "CVf_IsMETHOD" bit, which causes the new subroutine to be a method.

    This returns the value of "PL_savestack_ix" that was in effect upon entry to the function;

     I32       start_subparse(      I32 is_format, U32 flags)
     I32  Perl_start_subparse(pTHX_ I32 is_format, U32 flags)

Stack Manipulation Macros

"dMARK"
    Declare a stack marker variable, "mark", for the XSUB. See "MARK" and "dORIGMARK".

       dMARK;

"dORIGMARK"
    Saves the original stack mark for the XSUB. See "ORIGMARK".

       dORIGMARK;

"dSP"
    Declares a local copy of perl's stack pointer for the XSUB, available via the "SP" macro. See "SP".

       dSP;

"dTARGET"
    Declare that this function uses "TARG", and initializes it

       dTARGET;

"EXTEND"
    Used to extend the argument stack for an XSUB's return values. Once used, guarantees that there is room for at least "nitems" to be pushed onto the stack.

     void  EXTEND(SP, SSize_t nitems)

"MARK"
    Stack marker variable for the XSUB. See "dMARK".

"mPUSHi"
    Push an integer onto the stack. The stack must have room for this element. Does not use "TARG". See also "PUSHi", "mXPUSHi" and "XPUSHi".

     void  mPUSHi(IV iv)

"mPUSHn"
    Push a double onto the stack. The stack must have room for this element. Does not use "TARG". See also "PUSHn", "mXPUSHn" and "XPUSHn".

     void  mPUSHn(NV nv)

"mPUSHp"
    Push a string onto the stack. The stack must have room for this element. The "len" indicates the length of the string. Does not use "TARG". See also "PUSHp", "mXPUSHp" and "XPUSHp".

     void  mPUSHp(char* str, STRLEN len)

"mPUSHpvs"
    A variation on "mPUSHp" that takes a literal string and calculates its size directly.

     void  mPUSHpvs("literal string")

"mPUSHs"
    Push an SV onto the stack and mortalizes the SV. The stack must have room for this element. Does not use "TARG". See also "PUSHs" and "mXPUSHs".

     void  mPUSHs(SV* sv)

"mPUSHu"
    Push an unsigned integer onto the stack. The stack must have room for this element. Does not use "TARG". See also "PUSHu", "mXPUSHu" and "XPUSHu".

     void  mPUSHu(UV uv)

"mXPUSHi"
    Push an integer onto the stack, extending the stack if necessary. Does not use "TARG". See also "XPUSHi", "mPUSHi" and "PUSHi".

     void  mXPUSHi(IV iv)

"mXPUSHn"
    Push a double onto the stack, extending the stack if necessary. Does not use "TARG". See also "XPUSHn", "mPUSHn" and "PUSHn".

     void  mXPUSHn(NV nv)

"mXPUSHp"
    Push a string onto the stack, extending the stack if necessary. The "len" indicates the length of the string. Does not use "TARG". See also "XPUSHp", "mPUSHp" and "PUSHp".

     void  mXPUSHp(char* str, STRLEN len)

"mXPUSHpvs"
    A variation on "mXPUSHp" that takes a literal string and calculates its size directly.

     void  mXPUSHpvs("literal string")

"mXPUSHs"
    Push an SV onto the stack, extending the stack if necessary and mortalizes the SV. Does not use "TARG". See also "XPUSHs" and "mPUSHs".

     void  mXPUSHs(SV* sv)

"mXPUSHu"
    Push an unsigned integer onto the stack, extending the stack if necessary. Does not use "TARG". See also "XPUSHu", "mPUSHu" and "PUSHu".

     void  mXPUSHu(UV uv)

"newXSproto"
    Used by "xsubpp" to hook up XSUBs as Perl subs. Adds Perl prototypes to the subs.

"ORIGMARK"
    The original stack mark for the XSUB. See "dORIGMARK".

"PL_markstack"
"PL_markstack_ptr"
"PL_savestack"
"PL_savestack_ix"
"PL_scopestack"
"PL_scopestack_ix"
"PL_scopestack_name"
"PL_stack_base"
"PL_stack_sp"
"PL_tmps_floor"
"PL_tmps_ix"
"PL_tmps_stack"
    Described in perlguts.

"POPi"
    Pops an integer off the stack.

     IV  POPi

"POPl"
    Pops a long off the stack.

     long  POPl

"POPn"
    Pops a double off the stack.

     NV  POPn

"POPp"
"POPpx"
    These each pop a string off the stack. There are two names for historical reasons.

     char*  POPp
     char*  POPpx

"POPpbytex"
    Pops a string off the stack which must consist of bytes i.e. characters < 256.

     char*  POPpbytex

"POPpx*"
    Described under "POPp"

"POPs"
    Pops an SV off the stack.

     SV*  POPs

"POPu"
    Pops an unsigned integer off the stack.

     UV  POPu

"POPul"
    Pops an unsigned long off the stack.

     long  POPul

"PUSHi"
    Push an integer onto the stack. The stack must have room for this element. Handles 'set' magic. Uses "TARG", so "dTARGET" or "dXSTARG" should be called to declare it. Do not call multiple "TARG"-oriented macros to return lists from XSUB's - see "mPUSHi" instead. See also "XPUSHi" and "mXPUSHi".

     void  PUSHi(IV iv)

"PUSHMARK"
    Opening bracket for arguments on a callback. See "PUTBACK" and perlcall.

     void  PUSHMARK(SP)

"PUSHmortal"
    Push a new mortal SV onto the stack. The stack must have room for this element. Does not use "TARG". See also "PUSHs", "XPUSHmortal" and "XPUSHs".

     void  PUSHmortal

"PUSHn"
    Push a double onto the stack. The stack must have room for this element. Handles 'set' magic. Uses "TARG", so "dTARGET" or "dXSTARG" should be called to declare it. Do not call multiple "TARG"-oriented macros to return lists from XSUB's - see "mPUSHn" instead. See also "XPUSHn" and "mXPUSHn".

     void  PUSHn(NV nv)

"PUSHp"
    Push a string onto the stack. The stack must have room for this element. The "len" indicates the length of the string. Handles 'set' magic. Uses "TARG", so "dTARGET" or "dXSTARG" should be called to declare it. Do not call multiple "TARG"-oriented macros to return lists from XSUB's - see "mPUSHp" instead. See also "XPUSHp" and "mXPUSHp".

     void  PUSHp(char* str, STRLEN len)

"PUSHpvs"
    A variation on "PUSHp" that takes a literal string and calculates its size directly.

     void  PUSHpvs("literal string")

"PUSHs"
    Push an SV onto the stack. The stack must have room for this element. Does not handle 'set' magic. Does not use "TARG". See also "PUSHmortal", "XPUSHs", and "XPUSHmortal".

     void  PUSHs(SV* sv)

"PUSHu"
    Push an unsigned integer onto the stack. The stack must have room for this element. Handles 'set' magic. Uses "TARG", so "dTARGET" or "dXSTARG" should be called to declare it. Do not call multiple "TARG"-oriented macros to return lists from XSUB's - see "mPUSHu" instead. See also "XPUSHu" and "mXPUSHu".

     void  PUSHu(UV uv)

"PUTBACK"
    Closing bracket for XSUB arguments. This is usually handled by "xsubpp". See "PUSHMARK" and perlcall for other uses.

       PUTBACK;

"SAVEt_INT"
    Described in perlguts.

"SP"
    Stack pointer. This is usually handled by "xsubpp". See "dSP" and "SPAGAIN".

"SPAGAIN"
    Refetch the stack pointer. Used after a callback. See perlcall.

       SPAGAIN;

"SSNEW"
"SSNEWa"
"SSNEWat"
"SSNEWt"
    These each temporarily allocate data on the savestack, returning an SSize_t index into the savestack, because a pointer would get broken if the savestack is moved on reallocation. Use ""SSPTR"" to convert the returned index into a pointer.

    The forms differ in that plain "SSNEW" allocates "size" bytes; "SSNEWt" and "SSNEWat" allocate "size" objects, each of which is type "type"; and <SSNEWa> and "SSNEWat" make sure to align the new data to an "align" boundary. The most useful value for the alignment is likely to be ""MEM_ALIGNBYTES"". The alignment will be preserved through savestack reallocation only if realloc returns data aligned to a size divisible by "align"!

     SSize_t  SSNEW  (Size_t size)
     SSize_t  SSNEWa (Size_t size, Size_t align)
     SSize_t  SSNEWat(Size_t size, type, Size_t align)
     SSize_t  SSNEWt (Size_t size, type)

"SSPTR"
"SSPTRt"
    These convert the "index" returned by L/<"SSNEW"> and kin into actual pointers.

    The difference is that "SSPTR" casts the result to "type", and "SSPTRt" casts it to a pointer of that "type".

     type    SSPTR (SSize_t index, type)
     type *  SSPTRt(SSize_t index, type)

"TARG"
    "TARG" is short for "target". It is an entry in the pad that an OPs "op_targ" refers to. It is scratchpad space, often used as a return value for the OP, but some use it for other purposes.

       TARG;

"TOPs"
    Described in perlguts.

"XPUSHi"
    Push an integer onto the stack, extending the stack if necessary. Handles 'set' magic. Uses "TARG", so "dTARGET" or "dXSTARG" should be called to declare it. Do not call multiple "TARG"-oriented macros to return lists from XSUB's - see "mXPUSHi" instead. See also "PUSHi" and "mPUSHi".

     void  XPUSHi(IV iv)

"XPUSHmortal"
    Push a new mortal SV onto the stack, extending the stack if necessary. Does not use "TARG". See also "XPUSHs", "PUSHmortal" and "PUSHs".

     void  XPUSHmortal

"XPUSHn"
    Push a double onto the stack, extending the stack if necessary. Handles 'set' magic. Uses "TARG", so "dTARGET" or "dXSTARG" should be called to declare it. Do not call multiple "TARG"-oriented macros to return lists from XSUB's - see "mXPUSHn" instead. See also "PUSHn" and "mPUSHn".

     void  XPUSHn(NV nv)

"XPUSHp"
    Push a string onto the stack, extending the stack if necessary. The "len" indicates the length of the string. Handles 'set' magic. Uses "TARG", so "dTARGET" or "dXSTARG" should be called to declare it. Do not call multiple "TARG"-oriented macros to return lists from XSUB's - see "mXPUSHp" instead. See also "PUSHp" and "mPUSHp".

     void  XPUSHp(char* str, STRLEN len)

"XPUSHpvs"
    A variation on "XPUSHp" that takes a literal string and calculates its size directly.

     void  XPUSHpvs("literal string")

"XPUSHs"
    Push an SV onto the stack, extending the stack if necessary. Does not handle 'set' magic. Does not use "TARG". See also "XPUSHmortal", "PUSHs" and "PUSHmortal".

     void  XPUSHs(SV* sv)

"XPUSHu"
    Push an unsigned integer onto the stack, extending the stack if necessary. Handles 'set' magic. Uses "TARG", so "dTARGET" or "dXSTARG" should be called to declare it. Do not call multiple "TARG"-oriented macros to return lists from XSUB's - see "mXPUSHu" instead. See also "PUSHu" and "mPUSHu".

     void  XPUSHu(UV uv)

"XS_APIVERSION_BOOTCHECK"
    Macro to verify that the perl api version an XS module has been compiled against matches the api version of the perl interpreter it's being loaded into.

       XS_APIVERSION_BOOTCHECK;

"XS_VERSION"
    The version identifier for an XS module. This is usually handled automatically by "ExtUtils::MakeMaker". See "XS_VERSION_BOOTCHECK".

"XS_VERSION_BOOTCHECK"
    Macro to verify that a PM module's $VERSION variable matches the XS module's "XS_VERSION" variable. This is usually handled automatically by "xsubpp". See "The VERSIONCHECK: Keyword" in perlxs.

       XS_VERSION_BOOTCHECK;

"XSRETURN"
    Return from XSUB, indicating number of items on the stack. This is usually handled by "xsubpp".

     void  XSRETURN(int nitems)

"XSRETURN_EMPTY"
    Return an empty list from an XSUB immediately.

       XSRETURN_EMPTY;

"XSRETURN_IV"
    Return an integer from an XSUB immediately. Uses "XST_mIV".

     void  XSRETURN_IV(IV iv)

"XSRETURN_NO"
    Return &PL_sv_no from an XSUB immediately. Uses "XST_mNO".

       XSRETURN_NO;

"XSRETURN_NV"
    Return a double from an XSUB immediately. Uses "XST_mNV".

     void  XSRETURN_NV(NV nv)

"XSRETURN_PV"
    Return a copy of a string from an XSUB immediately. Uses "XST_mPV".

     void  XSRETURN_PV(char* str)

"XSRETURN_UNDEF"
    Return &PL_sv_undef from an XSUB immediately. Uses "XST_mUNDEF".

       XSRETURN_UNDEF;

"XSRETURN_UV"
    Return an integer from an XSUB immediately. Uses "XST_mUV".

     void  XSRETURN_UV(IV uv)

"XSRETURN_YES"
    Return &PL_sv_yes from an XSUB immediately. Uses "XST_mYES".

       XSRETURN_YES;

"XST_mIV"
    Place an integer into the specified position "pos" on the stack. The value is stored in a new mortal SV.

     void  XST_mIV(int pos, IV iv)

"XST_mNO"
    Place &PL_sv_no into the specified position "pos" on the stack.

     void  XST_mNO(int pos)

"XST_mNV"
    Place a double into the specified position "pos" on the stack. The value is stored in a new mortal SV.

     void  XST_mNV(int pos, NV nv)

"XST_mPV"
    Place a copy of a string into the specified position "pos" on the stack. The value is stored in a new mortal SV.

     void  XST_mPV(int pos, char* str)

"XST_mUNDEF"
    Place &PL_sv_undef into the specified position "pos" on the stack.

     void  XST_mUNDEF(int pos)

"XST_mUV"
    Place an unsigned integer into the specified position "pos" on the stack. The value is stored in a new mortal SV.

     void  XST_mUV(int pos, UV uv)

"XST_mYES"
    Place &PL_sv_yes into the specified position "pos" on the stack.

     void  XST_mYES(int pos)

String Handling
See also "Unicode Support".

"Copy"
"CopyD"
    The XSUB-writer's interface to the C "memcpy" function. The "src" is the source, "dest" is the destination, "nitems" is the number of items, and "type" is the type. May fail on overlapping copies. See also "Move".

    "CopyD" is like "Copy" but returns "dest". Useful for encouraging compilers to tail-call optimise.

     void    Copy (void* src, void* dest, int nitems, type)
     void *  CopyD(void* src, void* dest, int nitems, type)

"delimcpy"
    Copy a source buffer to a destination buffer, stopping at (but not including) the first occurrence in the source of an unescaped (defined below) delimiter byte, "delim". The source is the bytes between "from" and "from_end" - 1. Similarly, the dest is "to" up to "to_end".

    The number of bytes copied is written to *retlen.

    Returns the position of the first uncopied "delim" in the "from" buffer, but if there is no such occurrence before "from_end", then "from_end" is returned, and the entire buffer "from" .. "from_end" - 1 is copied.

    If there is room in the destination available after the copy, an extra terminating safety "NUL" byte is appended (not included in the returned length).

    The error case is if the destination buffer is not large enough to accommodate everything that should be copied. In this situation, a value larger than "to_end" - "to" is written to *retlen, and as much of the source as fits will be written to the destination. Not having room for the safety "NUL" is not considered an error.

    In the following examples, let "x" be the delimiter, and 0 represent a "NUL" byte (NOT the digit 0). Then we would have

      Source     Destination
     abcxdef        abc0

    provided the destination buffer is at least 4 bytes long.

    An escaped delimiter is one which is immediately preceded by a single backslash. Escaped delimiters are copied, and the copy continues past the delimiter; the backslash is not copied:

      Source       Destination
     abc\xdef       abcxdef0

    (provided the destination buffer is at least 8 bytes long).

    It's actually somewhat more complicated than that. A sequence of any odd number of backslashes escapes the following delimiter, and the copy continues with exactly one of the backslashes stripped.

         Source         Destination
         abc\xdef          abcxdef0
       abc\\\xdef        abc\\xdef0
     abc\\\\\xdef      abc\\\\xdef0

    (as always, if the destination is large enough)

    An even number of preceding backslashes does not escape the delimiter, so that the copy stops just before it, and includes all the backslashes (no stripping; zero is considered even):

          Source         Destination
          abcxdef          abc0
        abc\\xdef          abc\\0
      abc\\\\xdef          abc\\\\0

     char *       delimcpy(char *to, const char *to_end,
                           const char *from, const char *from_end,
                           const int delim, I32 *retlen)
     char *  Perl_delimcpy(char *to, const char *to_end,
                           const char *from, const char *from_end,
                           const int delim, I32 *retlen)

"do_join"
    This performs a Perl "join", placing the joined output into "sv".

    The elements to join are in SVs, stored in a C array of pointers to SVs, from **mark to "**sp - 1". Hence *mark is a reference to the first SV. Each SV will be coerced into a PV if not one already.

    "delim" contains the string (or coerced into a string) that is to separate each of the joined elements.

    If any component is in UTF-8, the result will be as well, and all non-UTF-8 components will be converted to UTF-8 as necessary.

    Magic and tainting are handled.

     void       do_join(      SV *sv, SV *delim, SV **mark, SV **sp)
     void  Perl_do_join(pTHX_ SV *sv, SV *delim, SV **mark, SV **sp)

"do_sprintf"
    This performs a Perl "sprintf" placing the string output into "sv".

    The elements to format are in SVs, stored in a C array of pointers to SVs of length "len"> and beginning at **sarg. The element referenced by *sarg is the format.

    Magic and tainting are handled.

     void       do_sprintf(      SV *sv, SSize_t len, SV **sarg)
     void  Perl_do_sprintf(pTHX_ SV *sv, SSize_t len, SV **sarg)

"fbm_compile"
    Analyzes the string in order to make fast searches on it using fbm_instr() -- the Boyer-Moore algorithm.

     void       fbm_compile(      SV *sv, U32 flags)
     void  Perl_fbm_compile(pTHX_ SV *sv, U32 flags)

"fbm_instr"
    Returns the location of the SV in the string delimited by "big" and "bigend" ("bigend") is the char following the last char). It returns "NULL" if the string can't be found. The "sv" does not have to be "fbm_compiled", but the search will not be as fast then.

     char *       fbm_instr(      unsigned char *big,
                                  unsigned char *bigend,
                                  SV *littlestr, U32 flags)
     char *  Perl_fbm_instr(pTHX_ unsigned char *big,
                                  unsigned char *bigend,
                                  SV *littlestr, U32 flags)

"foldEQ"
"foldEQ_locale"
    These each return true if the leading "len" bytes of the strings "s1" and "s2" are the same case-insensitively; false otherwise.

    In "foldEQ", uppercase and lowercase ASCII range bytes match themselves and their opposite case counterparts. Non-cased and non-ASCII range bytes match only themselves.

    In "foldEQ_locale", the comparison is based on the current locale. If that locale is UTF-8, the results are the same as "foldEQ", leading to incorrect values for non-ASCII range code points. Use "foldEQ_utf8" instead.

     I32       foldEQ       (      const char *a, const char *b,
                                   I32 len)
     I32  Perl_foldEQ       (pTHX_ const char *a, const char *b,
                                   I32 len)
     I32       foldEQ_locale(      const char *a, const char *b,
                                   I32 len)
     I32  Perl_foldEQ_locale(pTHX_ const char *a, const char *b,
                                   I32 len)

"ibcmp"
"ibcmp_locale"
"ibcmp_utf8"
    These return the complement of "foldEQ", "foldEQ_locale", and "foldEQ_utf8" respectively. Those other names are preferred, as being clearer.

    Hence, for example, ibcmp() is "(! foldEQ())"

     I32  ibcmp       (const char *a, const char *b, I32 len)
     I32  ibcmp_locale(const char *a, const char *b, I32 len)
     I32  ibcmp_utf8  (const char *s1, char **pe1, UV l1, bool u1,
                       const char *s2, char **pe2, UV l2, bool u2)

"instr"
    Same as strstr(3), which finds and returns a pointer to the first occurrence of the NUL-terminated substring "little" in the NUL-terminated string "big", returning NULL if not found. The terminating NUL bytes are not compared.

     char *       instr(const char *big, const char *little)
     char *  Perl_instr(const char *big, const char *little)

"memCHRs"
    Returns the position of the first occurrence of the byte "c" in the literal string "list", or NULL if "c" doesn't appear in "list". All bytes are treated as unsigned char. Thus this macro can be used to determine if "c" is in a set of particular characters. Unlike strchr(3), it works even if "c" is "NUL" (and the set doesn't include "NUL").

     bool  memCHRs("list", char c)

"memEQ"
    Test two buffers (which may contain embedded "NUL" characters, to see if they are equal. The "len" parameter indicates the number of bytes to compare. Returns true or false. It is undefined behavior if either of the buffers doesn't contain at least "len" bytes.

     bool  memEQ(char* s1, char* s2, STRLEN len)

"memEQs"
    Like "memEQ", but the second string is a literal enclosed in double quotes, "l1" gives the number of bytes in "s1". Returns true or false.

     bool  memEQs(char* s1, STRLEN l1, "s2")

"memNE"
    Test two buffers (which may contain embedded "NUL" characters, to see if they are not equal. The "len" parameter indicates the number of bytes to compare. Returns true or false. It is undefined behavior if either of the buffers doesn't contain at least "len" bytes.

     bool  memNE(char* s1, char* s2, STRLEN len)

"memNEs"
    Like "memNE", but the second string is a literal enclosed in double quotes, "l1" gives the number of bytes in "s1". Returns true or false.

     bool  memNEs(char* s1, STRLEN l1, "s2")

"Move"
"MoveD"
    The XSUB-writer's interface to the C "memmove" function. The "src" is the source, "dest" is the destination, "nitems" is the number of items, and "type" is the type. Can do overlapping moves. See also "Copy".

    "MoveD" is like "Move" but returns "dest". Useful for encouraging compilers to tail-call optimise.

     void    Move (void* src, void* dest, int nitems, type)
     void *  MoveD(void* src, void* dest, int nitems, type)

"my_snprintf"
    The C library "snprintf" functionality, if available and standards-compliant (uses "vsnprintf", actually). However, if the "vsnprintf" is not available, will unfortunately use the unsafe "vsprintf" which can overrun the buffer (there is an overrun check, but that may be too late). Consider using "sv_vcatpvf" instead, or getting "vsnprintf".

     int       my_snprintf(char *buffer, const Size_t len,
                           const char *format, ...)
     int  Perl_my_snprintf(char *buffer, const Size_t len,
                           const char *format, ...)

"my_sprintf"
    "DEPRECATED!" It is planned to remove "my_sprintf" from a future release of Perl. Do not use it for new code; remove it from existing code.

    Do NOT use this due to the possibility of overflowing "buffer". Instead use my_snprintf()

     int  my_sprintf(char *buffer, const char *pat, ...)

"my_strlcat"
    The C library "strlcat" if available, or a Perl implementation of it. This operates on C "NUL"-terminated strings.

    my_strlcat() appends string "src" to the end of "dst". It will append at most "size - strlen(dst) - 1" bytes. It will then "NUL"-terminate, unless "size" is 0 or the original "dst" string was longer than "size" (in practice this should not happen as it means that either "size" is incorrect or that "dst" is not a proper "NUL"-terminated string).

    Note that "size" is the full size of the destination buffer and the result is guaranteed to be "NUL"-terminated if there is room. Note that room for the "NUL" should be included in "size".

    The return value is the total length that "dst" would have if "size" is sufficiently large. Thus it is the initial length of "dst" plus the length of "src". If "size" is smaller than the return, the excess was not appended.

     Size_t       my_strlcat(char *dst, const char *src, Size_t size)
     Size_t  Perl_my_strlcat(char *dst, const char *src, Size_t size)

"my_strlcpy"
    The C library "strlcpy" if available, or a Perl implementation of it. This operates on C "NUL"-terminated strings.

    my_strlcpy() copies up to "size - 1" bytes from the string "src" to "dst", "NUL"-terminating the result if "size" is not 0.

    The return value is the total length "src" would be if the copy completely succeeded. If it is larger than "size", the excess was not copied.

     Size_t  my_strlcpy(char *dst, const char *src, Size_t size)

"my_strnlen"
    The C library "strnlen" if available, or a Perl implementation of it.

    my_strnlen() computes the length of the string, up to "maxlen" bytes. It will never attempt to address more than "maxlen" bytes, making it suitable for use with strings that are not guaranteed to be NUL-terminated.

     Size_t       my_strnlen(const char *str, Size_t maxlen)
     Size_t  Perl_my_strnlen(const char *str, Size_t maxlen)

"my_vsnprintf"
    The C library "vsnprintf" if available and standards-compliant. However, if the "vsnprintf" is not available, will unfortunately use the unsafe "vsprintf" which can overrun the buffer (there is an overrun check, but that may be too late). Consider using "sv_vcatpvf" instead, or getting "vsnprintf".

     int       my_vsnprintf(char *buffer, const Size_t len,
                            const char *format, va_list ap)
     int  Perl_my_vsnprintf(char *buffer, const Size_t len,
                            const char *format, va_list ap)

"NewCopy"
    Combines Newx() and Copy() into a single macro. Dest will be allocated using Newx() and then src will be copied into it.

     void  NewCopy(void* src, void* dest, int nitems, type)

"ninstr"
    Find the first (leftmost) occurrence of a sequence of bytes within another sequence. This is the Perl version of strstr(), extended to handle arbitrary sequences, potentially containing embedded "NUL" characters ("NUL" is what the initial "n" in the function name stands for; some systems have an equivalent, memmem(), but with a somewhat different API).

    Another way of thinking about this function is finding a needle in a haystack. "big" points to the first byte in the haystack. "big_end" points to one byte beyond the final byte in the haystack. "little" points to the first byte in the needle. "little_end" points to one byte beyond the final byte in the needle. All the parameters must be non-"NULL".

    The function returns "NULL" if there is no occurrence of "little" within "big". If "little" is the empty string, "big" is returned.

    Because this function operates at the byte level, and because of the inherent characteristics of UTF-8 (or UTF-EBCDIC), it will work properly if both the needle and the haystack are strings with the same UTF-8ness, but not if the UTF-8ness differs.

     char *       ninstr(const char *big, const char *bigend,
                         const char *little, const char *lend)
     char *  Perl_ninstr(const char *big, const char *bigend,
                         const char *little, const char *lend)

"Nullch"
    Null character pointer. (No longer available when "PERL_CORE" is defined.)

"PL_na"
    A scratch pad variable in which to store a "STRLEN" value. If would have been better named something like "PL_temp_strlen".

    It is is typically used with "SvPV" when one is actually planning to discard the returned length, (hence the length is "Not Applicable", which is how this variable got its name).

    BUT BEWARE, if this is used in a situation where something that is using it is in a call stack with something else that is using it, this variable would get zapped, leading to hard-to-diagnose errors.

    It is usually more efficient to either declare a local variable and use that instead, or to use the "SvPV_nolen" macro.

     STRLEN  PL_na

"rninstr"
    Like "ninstr", but instead finds the final (rightmost) occurrence of a sequence of bytes within another sequence, returning "NULL" if there is no such occurrence.

     char *       rninstr(const char *big, const char *bigend,
                          const char *little, const char *lend)
     char *  Perl_rninstr(const char *big, const char *bigend,
                          const char *little, const char *lend)

"savepv"
"savepvn"
"savepvs"
"savesvpv"
"savesharedpv"
"savesharedpvn"
"savesharedpvs"
"savesharedsvpv"
    Perl's version of strdup() (or strndup() would be if it existed).

    These each return a pointer to a newly allocated string which is a duplicate of the input string.

    The forms differ in how the string to be copied is specified, and where the new memory is allocated from.

    To prevent memory leaks, the memory allocated for the new string needs to be freed when no longer needed. This can be done with the "Safefree" function, or "SAVEFREEPV".

    The forms whose names contain "shared" differ from the corresponding form without that in its name, only in that the memory in the former comes from memory shared between threads. This is needed, because on some platforms, Windows for example, all allocated memory owned by a thread is deallocated when that thread ends. So if you need that not to happen, you need to use the shared memory forms.

    The string to copy in "savepvs" is a C language string literal surrounded by double quotes.

    The string to copy in the forms whose name contains "svpv" comes from the PV in the SV argument "sv", using SvPV()

    The string to copy in the remaining forms comes from the "pv" argument.

    In the case of "savepv", the size of the string is determined by strlen(), which means it may not contain embedded "NUL" characters, and must have a trailing "NUL".

    In the case of "savepvn", "len" gives the length of "pv", hence it may contain embedded "NUL" characters. The copy will be guaranteed to have a trailing NUL added if not already present.

     char *       savepv        (      const char *pv)
     char *  Perl_savepv        (pTHX_ const char *pv)
     char *       savepvn       (      const char *pv, Size_t len)
     char *  Perl_savepvn       (pTHX_ const char *pv, Size_t len)
     char*        savepvs       (      "literal string")
     char *       savesvpv      (      SV *sv)
     char *  Perl_savesvpv      (pTHX_ SV *sv)
     char *       savesharedpv  (      const char *pv)
     char *  Perl_savesharedpv  (pTHX_ const char *pv)
     char *       savesharedpvn (      const char * const pv,
                                       const STRLEN len)
     char *  Perl_savesharedpvn (pTHX_ const char * const pv,
                                       const STRLEN len)
     char*        savesharedpvs (      "literal string")
     char *       savesharedsvpv(      SV *sv)
     char *  Perl_savesharedsvpv(pTHX_ SV *sv)

"STR_WITH_LEN"
    Returns two comma separated tokens of the input literal string, and its length. This is convenience macro which helps out in some API calls. Note that it can't be used as an argument to macros or functions that under some configurations might be macros, which means that it requires the full Perl_xxx(aTHX_ ...) form for any API calls where it's used.

     pair  STR_WITH_LEN("literal string")

"strEQ"
    Test two "NUL"-terminated strings to see if they are equal. Returns true or false.

     bool  strEQ(char* s1, char* s2)

"strGE"
    Test two "NUL"-terminated strings to see if the first, "s1", is greater than or equal to the second, "s2". Returns true or false.

     bool  strGE(char* s1, char* s2)

"strGT"
    Test two "NUL"-terminated strings to see if the first, "s1", is greater than the second, "s2". Returns true or false.

     bool  strGT(char* s1, char* s2)

"strLE"
    Test two "NUL"-terminated strings to see if the first, "s1", is less than or equal to the second, "s2". Returns true or false.

     bool  strLE(char* s1, char* s2)

"STRLEN"
    Described in perlguts.

"strLT"
    Test two "NUL"-terminated strings to see if the first, "s1", is less than the second, "s2". Returns true or false.

     bool  strLT(char* s1, char* s2)

"strNE"
    Test two "NUL"-terminated strings to see if they are different. Returns true or false.

     bool  strNE(char* s1, char* s2)

"strnEQ"
    Test two "NUL"-terminated strings to see if they are equal. The "len" parameter indicates the number of bytes to compare. Returns true or false. (A wrapper for "strncmp").

     bool  strnEQ(char* s1, char* s2, STRLEN len)

"strnNE"
    Test two "NUL"-terminated strings to see if they are different. The "len" parameter indicates the number of bytes to compare. Returns true or false. (A wrapper for "strncmp").

     bool  strnNE(char* s1, char* s2, STRLEN len)

"Zero"
"ZeroD"
    The XSUB-writer's interface to the C "memzero" function. The "dest" is the destination, "nitems" is the number of items, and "type" is the type.

    "ZeroD" is like "Zero" but returns "dest". Useful for encouraging compilers to tail-call optimise.

     void    Zero (void* dest, int nitems, type)
     void *  ZeroD(void* dest, int nitems, type)

SV Flags

"SVt_IV"
"SVt_NULL"
"SVt_NV"
"SVt_PV"
    Type flag for scalars. See "svtype".

"SVt_PVAV"
    Type flag for arrays. See "svtype".

"SVt_PVCV"
    Type flag for subroutines. See "svtype".

"SVt_PVFM"
    Type flag for formats. See "svtype".

"SVt_PVGV"
    Type flag for typeglobs. See "svtype".

"SVt_PVHV"
    Type flag for hashes. See "svtype".

"SVt_PVIO"
    Type flag for I/O objects. See "svtype".

"SVt_PVIV"
"SVt_PVLV"
"SVt_PVMG"
"SVt_PVNV"
    Type flag for scalars. See "svtype".

"SVt_PVOBJ"
    NOTE: "SVt_PVOBJ" is experimental and may change or be removed without notice.

    Type flag for object instances. See "svtype".

"SVt_REGEXP"
    Type flag for regular expressions. See "svtype".

"svtype"
    An enum of flags for Perl types. These are found in the file sv.h in the "svtype" enum. Test these flags with the "SvTYPE" macro.

    The types are:

        SVt_NULL
        SVt_IV
        SVt_NV
        SVt_RV
        SVt_PV
        SVt_PVIV
        SVt_PVNV
        SVt_PVMG
        SVt_INVLIST
        SVt_REGEXP
        SVt_PVGV
        SVt_PVLV
        SVt_PVAV
        SVt_PVHV
        SVt_PVCV
        SVt_PVFM
        SVt_PVIO
        SVt_PVOBJ

    These are most easily explained from the bottom up.

    "SVt_PVOBJ" is for object instances of the new `use feature 'class'` kind. "SVt_PVIO" is for I/O objects, "SVt_PVFM" for formats, "SVt_PVCV" for subroutines, "SVt_PVHV" for hashes and "SVt_PVAV" for arrays.

    All the others are scalar types, that is, things that can be bound to a "$" variable. For these, the internal types are mostly orthogonal to types in the Perl language.

    Hence, checking "SvTYPE(sv) < SVt_PVAV" is the best way to see whether something is a scalar.

    "SVt_PVGV" represents a typeglob. If "!SvFAKE(sv)", then it is a real, incoercible typeglob. If SvFAKE(sv), then it is a scalar to which a typeglob has been assigned. Assigning to it again will stop it from being a typeglob. "SVt_PVLV" represents a scalar that delegates to another scalar behind the scenes. It is used, e.g., for the return value of "substr" and for tied hash and array elements. It can hold any scalar value, including a typeglob. "SVt_REGEXP" is for regular expressions. "SVt_INVLIST" is for Perl core internal use only.

    "SVt_PVMG" represents a "normal" scalar (not a typeglob, regular expression, or delegate). Since most scalars do not need all the internal fields of a PVMG, we save memory by allocating smaller structs when possible. All the other types are just simpler forms of "SVt_PVMG", with fewer internal fields. "SVt_NULL" can only hold undef. "SVt_IV" can hold undef, an integer, or a reference. ("SVt_RV" is an alias for "SVt_IV", which exists for backward compatibility.) "SVt_NV" can hold undef or a double. (In builds that support headless NVs, these could also hold a reference via a suitable offset, in the same way that SVt_IV does, but this is not currently supported and seems to be a rare use case.) "SVt_PV" can hold "undef", a string, or a reference. "SVt_PVIV" is a superset of "SVt_PV" and "SVt_IV". "SVt_PVNV" is a superset of "SVt_PV" and "SVt_NV". "SVt_PVMG" can hold anything "SVt_PVNV" can hold, but it may also be blessed or magical.

SV Handling

"AV_FROM_REF"
"CV_FROM_REF"
"GV_FROM_REF"
"HV_FROM_REF"
    The "*V_FROM_REF" macros extract the SvRV() from a given reference SV and return a suitably-cast to pointer to the referenced SV. When running under "-DDEBUGGING", assertions are also applied that check that ref is definitely a reference SV that refers to an SV of the right type.

     AV *  AV_FROM_REF(SV * ref)
     CV *  CV_FROM_REF(SV * ref)
     GV *  GV_FROM_REF(SV * ref)
     HV *  HV_FROM_REF(SV * ref)

"BOOL_INTERNALS_sv_isbool"
    Checks if a SvBoolFlagsOK() sv is a bool. Note that it is the caller's responsibility to ensure that the sv is SvBoolFlagsOK() before calling this. This is only useful in specialized logic like serialization code where performance is critical and the flags have already been checked to be correct. Almost always you should be using sv_isbool(sv) instead.

     bool  BOOL_INTERNALS_sv_isbool(SV* sv)

"BOOL_INTERNALS_sv_isbool_false"
    Checks if a SvBoolFlagsOK() sv is a false bool. Note that it is the caller's responsibility to ensure that the sv is SvBoolFlagsOK() before calling this. This is only useful in specialized logic like serialization code where performance is critical and the flags have already been checked to be correct. This is NOT what you should use to check if an SV is "false", for that you should be using "!SvTRUE(sv)" instead.

     bool  BOOL_INTERNALS_sv_isbool_false(SV* sv)

"BOOL_INTERNALS_sv_isbool_true"
    Checks if a SvBoolFlagsOK() sv is a true bool. Note that it is the caller's responsibility to ensure that the sv is SvBoolFlagsOK() before calling this. This is only useful in specialized logic like serialization code where performance is critical and the flags have already been checked to be correct. This is NOT what you should use to check if an SV is "true", for that you should be using SvTRUE(sv) instead.

     bool  BOOL_INTERNALS_sv_isbool_true(SV* sv)

"boolSV"
    Returns a true SV if "b" is a true value, or a false SV if "b" is 0.

    See also "PL_sv_yes" and "PL_sv_no".

     SV *  boolSV(bool b)

"croak_xs_usage"
    A specialised variant of croak() for emitting the usage message for xsubs

        croak_xs_usage(cv, "eee_yow");

    works out the package name and subroutine name from "cv", and then calls croak(). Hence if "cv" is &ouch::awk, it would call "croak" as:

     diag_listed_as: SKIPME
     croak("Usage: %" SVf "::%" SVf "(%s)", "ouch" "awk",
                                                         "eee_yow");

     void       croak_xs_usage(const CV * const cv,
                               const char * const params)
     void  Perl_croak_xs_usage(const CV * const cv,
                               const char * const params)

"CV_FROM_REF*"
    Described under "AV_FROM_REF"

"DEFSV"
    Returns the SV associated with $_

     SV *  DEFSV

"DEFSV_set"
    Associate "sv" with $_

     void  DEFSV_set(SV * sv)

"get_sv"
    Returns the SV of the specified Perl scalar. "flags" are passed to ""gv_fetchpv"". If "GV_ADD" is set and the Perl variable does not exist then it will be created. If "flags" is zero and the variable does not exist then NULL is returned.

    NOTE: the perl_get_sv() form is deprecated.

     SV *       get_sv(      const char *name, I32 flags)
     SV *  Perl_get_sv(pTHX_ const char *name, I32 flags)

"GV_FROM_REF*"
"HV_FROM_REF*"
    Described under "AV_FROM_REF"

"isGV_with_GP"
    Returns a boolean as to whether or not "sv" is a GV with a pointer to a GP (glob pointer).

     bool  isGV_with_GP(SV * sv)

"looks_like_number"
    Test if the content of an SV looks like a number (or is a number). "Inf" and "Infinity" are treated as numbers (so will not issue a non-numeric warning), even if your atof() doesn't grok them. Get-magic is ignored.

     I32       looks_like_number(      SV * const sv)
     I32  Perl_looks_like_number(pTHX_ SV * const sv)

"MUTABLE_AV"
"MUTABLE_CV"
"MUTABLE_GV"
"MUTABLE_HV"
"MUTABLE_IO"
"MUTABLE_PTR"
"MUTABLE_SV"
    The "MUTABLE_*"() macros cast pointers to the types shown, in such a way (compiler permitting) that casting away const-ness will give a warning; e.g.:

     const SV *sv = ...;
     AV *av1 = (AV*)sv;        <== BAD:  the const has been silently
                                         cast away
     AV *av2 = MUTABLE_AV(sv); <== GOOD: it may warn

    "MUTABLE_PTR" is the base macro used to derive new casts. The other already-built-in ones return pointers to what their names indicate.

     AV *    MUTABLE_AV (AV * p)
     CV *    MUTABLE_CV (CV * p)
     GV *    MUTABLE_GV (GV * p)
     HV *    MUTABLE_HV (HV * p)
     IO *    MUTABLE_IO (IO * p)
     void *  MUTABLE_PTR(void * p)
     SV *    MUTABLE_SV (SV * p)

"newRV"
"newRV_inc"
    These are identical. They create an RV wrapper for an SV. The reference count for the original SV is incremented.

     SV *       newRV    (      SV * const sv)
     SV *  Perl_newRV    (pTHX_ SV * const sv)
     SV *       newRV_inc(      SV * const sv)

"newRV_noinc"
    Creates an RV wrapper for an SV. The reference count for the original SV is not incremented.

     SV *       newRV_noinc(      SV * const tmpRef)
     SV *  Perl_newRV_noinc(pTHX_ SV * const tmpRef)

"newSV"
    Creates a new SV. A non-zero "len" parameter indicates the number of bytes of preallocated string space the SV should have. An extra byte for a trailing "NUL" is also reserved. ("SvPOK" is not set for the SV even if string space is allocated.) The reference count for the new SV is set to 1.

    In 5.9.3, newSV() replaces the older NEWSV() API, and drops the first parameter, x, a debug aid which allowed callers to identify themselves. This aid has been superseded by a new build option, "PERL_MEM_LOG" (see "PERL_MEM_LOG" in perlhacktips). The older API is still there for use in XS modules supporting older perls.

     SV *       newSV(      const STRLEN len)
     SV *  Perl_newSV(pTHX_ const STRLEN len)

"newSV_false"
    Creates a new SV that is a boolean false.

     SV *       newSV_false()
     SV *  Perl_newSV_false(pTHX)

"newSV_true"
    Creates a new SV that is a boolean true.

     SV *       newSV_true()
     SV *  Perl_newSV_true(pTHX)

"newSV_type"
    Creates a new SV, of the type specified. The reference count for the new SV is set to 1.

     SV *       newSV_type(      const svtype type)
     SV *  Perl_newSV_type(pTHX_ const svtype type)

"newSV_type_mortal"
    Creates a new mortal SV, of the type specified. The reference count for the new SV is set to 1.

    This is equivalent to
        SV* sv = sv_2mortal(newSV_type(<some type>)) and
        SV* sv = sv_newmortal();
        sv_upgrade(sv, <some_type>) but should be more efficient than both of them. (Unless sv_2mortal is inlined at some point in the future.)

     SV *       newSV_type_mortal(      const svtype type)
     SV *  Perl_newSV_type_mortal(pTHX_ const svtype type)

"newSVbool"
    Creates a new SV boolean.

     SV *       newSVbool(      const bool bool_val)
     SV *  Perl_newSVbool(pTHX_ const bool bool_val)

"newSVhek"
    Creates a new SV from the hash key structure. It will generate scalars that point to the shared string table where possible. Returns a new (undefined) SV if "hek" is NULL.

     SV *       newSVhek(      const HEK * const hek)
     SV *  Perl_newSVhek(pTHX_ const HEK * const hek)

"newSVhek_mortal"
    Creates a new mortal SV from the hash key structure. It will generate scalars that point to the shared string table where possible. Returns a new (undefined) SV if "hek" is NULL.

    This is more efficient than using sv_2mortal(newSVhek( ... ))

     SV *       newSVhek_mortal(      const HEK * const hek)
     SV *  Perl_newSVhek_mortal(pTHX_ const HEK * const hek)

"newSViv"
    Creates a new SV and copies an integer into it. The reference count for the SV is set to 1.

     SV *       newSViv(      const IV i)
     SV *  Perl_newSViv(pTHX_ const IV i)

"newSVnv"
    Creates a new SV and copies a floating point value into it. The reference count for the SV is set to 1.

     SV *       newSVnv(      const NV n)
     SV *  Perl_newSVnv(pTHX_ const NV n)

"newSVpadname"
    NOTE: "newSVpadname" is experimental and may change or be removed without notice.

    Creates a new SV containing the pad name.

     SV*  newSVpadname(PADNAME *pn)

"newSVpv"
    Creates a new SV and copies a string (which may contain "NUL" ("\0") characters) into it. The reference count for the SV is set to 1. If "len" is zero, Perl will compute the length using strlen(), (which means if you use this option, that "s" can't have embedded "NUL" characters and has to have a terminating "NUL" byte).

    This function can cause reliability issues if you are likely to pass in empty strings that are not null terminated, because it will run strlen on the string and potentially run past valid memory.

    Using "newSVpvn" is a safer alternative for non "NUL" terminated strings. For string literals use "newSVpvs" instead. This function will work fine for "NUL" terminated strings, but if you want to avoid the if statement on whether to call "strlen" use "newSVpvn" instead (calling "strlen" yourself).

     SV *       newSVpv(      const char * const s, const STRLEN len)
     SV *  Perl_newSVpv(pTHX_ const char * const s, const STRLEN len)

"newSVpv_share"
    Like "newSVpvn_share", but takes a "NUL"-terminated string instead of a string/length pair.

     SV *       newSVpv_share(      const char *s, U32 hash)
     SV *  Perl_newSVpv_share(pTHX_ const char *s, U32 hash)

"newSVpvf"
    Creates a new SV and initializes it with the string formatted like "sv_catpvf".

     SV *  Perl_newSVpvf(pTHX_ const char * const pat, ...)

"newSVpvf_nocontext"
    Like "newSVpvf" but does not take a thread context ("aTHX") parameter, so is used in situations where the caller doesn't already have the thread context.

     SV *       newSVpvf_nocontext(const char * const pat, ...)
     SV *  Perl_newSVpvf_nocontext(const char * const pat, ...)

"newSVpvn"
    Creates a new SV and copies a string into it, which may contain "NUL" characters ("\0") and other binary data. The reference count for the SV is set to 1. Note that if "len" is zero, Perl will create a zero length (Perl) string. You are responsible for ensuring that the source buffer is at least "len" bytes long. If the "buffer" argument is NULL the new SV will be undefined.

     SV *       newSVpvn(      const char * const s, const STRLEN len)
     SV *  Perl_newSVpvn(pTHX_ const char * const s, const STRLEN len)

"newSVpvn_flags"
    Creates a new SV and copies a string (which may contain "NUL" ("\0") characters) into it. The reference count for the SV is set to 1. Note that if "len" is zero, Perl will create a zero length string. You are responsible for ensuring that the source string is at least "len" bytes long. If the "s" argument is NULL the new SV will be undefined. Currently the only flag bits accepted are "SVf_UTF8" and "SVs_TEMP". If "SVs_TEMP" is set, then sv_2mortal() is called on the result before returning. If "SVf_UTF8" is set, "s" is considered to be in UTF-8 and the "SVf_UTF8" flag will be set on the new SV. newSVpvn_utf8() is a convenience wrapper for this function, defined as

        #define newSVpvn_utf8(s, len, u)                    \
            newSVpvn_flags((s), (len), (u) ? SVf_UTF8 : 0)

     SV *       newSVpvn_flags(      const char * const s,
                                     const STRLEN len,
                                     const U32 flags)
     SV *  Perl_newSVpvn_flags(pTHX_ const char * const s,
                                     const STRLEN len,
                                     const U32 flags)

"newSVpvn_share"
    Creates a new SV with its "SvPVX_const" pointing to a shared string in the string table. If the string does not already exist in the table, it is created first. Turns on the "SvIsCOW" flag (or "READONLY" and "FAKE" in 5.16 and earlier). If the "hash" parameter is non-zero, that value is used; otherwise the hash is computed. The string's hash can later be retrieved from the SV with the "SvSHARED_HASH" macro. The idea here is that as the string table is used for shared hash keys these strings will have "SvPVX_const == HeKEY" and hash lookup will avoid string compare.

     SV *       newSVpvn_share(      const char *s, I32 len, U32 hash)
     SV *  Perl_newSVpvn_share(pTHX_ const char *s, I32 len, U32 hash)

"newSVpvn_utf8"
    Creates a new SV and copies a string (which may contain "NUL" ("\0") characters) into it. If "utf8" is true, calls "SvUTF8_on" on the new SV. Implemented as a wrapper around "newSVpvn_flags".

     SV*  newSVpvn_utf8(const char* s, STRLEN len, U32 utf8)

"newSVpvs"
    Like "newSVpvn", but takes a literal string instead of a string/length pair.

     SV*  newSVpvs("literal string")

"newSVpvs_flags"
    Like "newSVpvn_flags", but takes a literal string instead of a string/length pair.

     SV*  newSVpvs_flags("literal string", U32 flags)

"newSVpvs_share"
    Like "newSVpvn_share", but takes a literal string instead of a string/length pair and omits the hash parameter.

     SV*  newSVpvs_share("literal string")

"newSVpvz"
    Creates a new SV initialized with an empty string, like newSVpvs(""), but with enough available space to hold a string of "len" bytes (plus a trailing NUL) without needing to grow. It differs from "newSV" in that the string is defined and initialized.

    The reference count for the new SV is set to 1.

     SV *       newSVpvz(      const STRLEN len)
     SV *  Perl_newSVpvz(pTHX_ const STRLEN len)

"newSVrv"
    Creates a new SV for the existing RV, "rv", to point to. If "rv" is not an RV then it will be upgraded to one. If "classname" is non-null then the new SV will be blessed in the specified package. The new SV is returned and its reference count is 1. The reference count 1 is owned by "rv". See also newRV_inc() and newRV_noinc() for creating a new RV properly.

     SV *       newSVrv(      SV * const rv,
                              const char * const classname)
     SV *  Perl_newSVrv(pTHX_ SV * const rv,
                              const char * const classname)

"newSVsv"
"newSVsv_flags"
"newSVsv_nomg"
    These create a new SV which is an exact duplicate of the original SV (using "sv_setsv".)

    They differ only in that "newSVsv" performs 'get' magic; "newSVsv_nomg" skips any magic; and "newSVsv_flags" allows you to explicitly set a "flags" parameter.

     SV *       newSVsv      (      SV * const old)
     SV *  Perl_newSVsv      (pTHX_ SV * const old)
     SV *       newSVsv_flags(      SV * const old, I32 flags)
     SV *  Perl_newSVsv_flags(pTHX_ SV * const old, I32 flags)
     SV *       newSVsv_nomg (      SV * const old)

"newSVuv"
    Creates a new SV and copies an unsigned integer into it. The reference count for the SV is set to 1.

     SV *       newSVuv(      const UV u)
     SV *  Perl_newSVuv(pTHX_ const UV u)

"Nullsv"
    Null SV pointer. (No longer available when "PERL_CORE" is defined.)

"PL_sv_no"
    This is the "false" SV. It is readonly. See "PL_sv_yes". Always refer to this as &PL_sv_no.

     SV  PL_sv_no

"PL_sv_undef"
    This is the "undef" SV. It is readonly. Always refer to this as &PL_sv_undef.

     SV  PL_sv_undef

"PL_sv_yes"
    This is the "true" SV. It is readonly. See "PL_sv_no". Always refer to this as &PL_sv_yes.

     SV  PL_sv_yes

"PL_sv_zero"
    This readonly SV has a zero numeric value and a "0" string value. It's similar to "PL_sv_no" except for its string value. Can be used as a cheap alternative to mXPUSHi(0) for example. Always refer to this as &PL_sv_zero. Introduced in 5.28.

     SV  PL_sv_zero

"SAVE_DEFSV"
    Localize $_. See "Localizing changes" in perlguts.

     void  SAVE_DEFSV

"sortsv"
    In-place sort an array of SV pointers with the given comparison routine.

    Currently this always uses mergesort. See "sortsv_flags" for a more flexible routine.

     void       sortsv(      SV **array, size_t num_elts,
                             SVCOMPARE_t cmp)
     void  Perl_sortsv(pTHX_ SV **array, size_t num_elts,
                             SVCOMPARE_t cmp)

"sortsv_flags"
    In-place sort an array of SV pointers with the given comparison routine, with various SORTf_* flag options.

     void       sortsv_flags(      SV **array, size_t num_elts,
                                   SVCOMPARE_t cmp, U32 flags)
     void  Perl_sortsv_flags(pTHX_ SV **array, size_t num_elts,
                                   SVCOMPARE_t cmp, U32 flags)

"SV"
    Described in perlguts.

"sv_backoff"
    Remove any string offset. You should normally use the "SvOOK_off" macro wrapper instead.

     void       sv_backoff(SV * const sv)
     void  Perl_sv_backoff(SV * const sv)

"sv_bless"
    Blesses an SV into a specified package. The SV must be an RV. The package must be designated by its stash (see "gv_stashpv"). The reference count of the SV is unaffected.

     SV *       sv_bless(      SV * const sv,
                               NOCHECK HV * const stash)
     SV *  Perl_sv_bless(pTHX_ SV * const sv,
                               NOCHECK HV * const stash)

"sv_catpv"
"sv_catpv_flags"
"sv_catpv_mg"
"sv_catpv_nomg"
"sv_catpvn"
"sv_catpvn_flags"
"sv_catpvn_mg"
"sv_catpvn_nomg"
"sv_catpvn_nomg_maybeutf8"
"sv_catpvs"
"sv_catpvs_flags"
"sv_catpvs_mg"
"sv_catpvs_nomg"
    These each concatenate a string onto the end of the string which is in "dsv". They differ in how the catenated string is specified and in the handling of magic and UTF-8ness.

    In the "pvs" forms, the catenated string is a C language string literal, enclosed in double quotes.

    In the "pvn" forms, "sstr" points to the first byte of the string to concatenate, and an additional parameter, "len", specifies the number of bytes to copy. Hence, "sstr" may contain embedded-NUL characters. The caller must make sure "sstr" contains at least "len" bytes.

    In the plain "pv" forms, the catenated string is a C language NUL-terminated string.

    The "_mg" forms perform both 'get' and 'set' magic on "dsv".

    The "_nomg" forms skip all magic.

    The other forms perform only 'get' magic.

    The "_flags" forms have an extra parameter, "flags", which allows you to also override the UTF-8 handling. By supplying the "SV_CATBYTES" flag, the appended string is interpreted as plain bytes; by supplying instead the "SV_CATUTF8" flag, it will be interpreted as UTF-8, and "dsv" will be upgraded to UTF-8 if necessary.

    "sv_catpvn_nomg_maybeutf8" has an extra boolean parameter, "is_utf8", which if "true" indicates that "sstr" is encoded in UTF-8; otherwise not.

    For all other forms, the string appended is assumed to be valid UTF-8 if and only if the "dsv" has the UTF-8 status set.

     void       sv_catpv                (      SV * const dsv,
                                               const char *sstr)
     void  Perl_sv_catpv                (pTHX_ SV * const dsv,
                                               const char *sstr)
     void       sv_catpv_flags          (      SV * const dsv,
                                               const char *sstr,
                                               const I32 flags)
     void  Perl_sv_catpv_flags          (pTHX_ SV * const dsv,
                                               const char *sstr,
                                               const I32 flags)
     void       sv_catpv_mg             (     SV * const dsv,
                                              const char * const sstr)
     void  Perl_sv_catpv_mg             (pTHX_ SV * const dsv,
                                              const char * const sstr)
     void       sv_catpv_nomg           (      SV * const dsv,
                                               const char * sstr
    )
     void       sv_catpvn               (      SV * const dsv,
                                               const char *sstr,
                                               STRLEN len)
     void  Perl_sv_catpvn               (pTHX_ SV * const dsv,
                                               const char *sstr,
                                               STRLEN len)
     void       sv_catpvn_flags         (      SV * const dsv,
                                               const char *sstr,
                                               const STRLEN len,
                                               const I32 flags)
     void  Perl_sv_catpvn_flags         (pTHX_ SV * const dsv,
                                               const char *sstr,
                                               const STRLEN len,
                                               const I32 flags)
     void       sv_catpvn_mg            (      SV * const dsv,
                                               const char *sstr,
                                               STRLEN len)
     void  Perl_sv_catpvn_mg            (pTHX_ SV * const dsv,
                                               const char *sstr,
                                               STRLEN len)
     void       sv_catpvn_nomg          (      SV * const dsv,
                                               const char * sstr,
                                               const STRLEN len
    )
     void       sv_catpvn_nomg_maybeutf8(      SV * const dsv,
                                               const char *sstr,
                                               const STRLEN len,
                                               const I32 flags
    )
     void       sv_catpvs               (      SV * const dsv,
                                               "literal string")
     void       sv_catpvs_flags         (      SV * const dsv,
                                               "literal string",
                                               I32 flags)
     void       sv_catpvs_mg            (      SV * const dsv,
                                               "literal string")
     void       sv_catpvs_nomg          (      SV * const dsv,
                                               "literal string")

"sv_catpvf"
"sv_catpvf_nocontext"
"sv_catpvf_mg"
"sv_catpvf_mg_nocontext"
"sv_vcatpvf"
"sv_vcatpvf_mg"
"sv_vcatpvfn"
"sv_vcatpvfn_flags"
    These each append to "sv" the result of formatting their arguments using "pat" as the "sprintf"-like pattern. They assume that "pat" has the same UTF8ness as "sv". It's the caller's responsibility to ensure that this is so.

    If the destination "sv" isn't already in UTF-8, but the appended data contains "wide" characters, "sv" will be converted to be UTF-8. An example is the %c format with the code point > 255. (This is an enhancement to what libc "sprintf" would do in this situation.) Other examples are given below.

    The forms differ in how their arguments are specified and in the handling of magic.

    "sv_vcatpvfn_flags" is the most general, and all the other forms are implemented by eventually calling it.

    It has two sets of argument lists, only one of which is used in any given call. The first set, "args", is an encapsulated argument list of pointers to C strings. If it is NULL, the other list, "svargs", is used; it is an array of pointers to SV's. "sv_count" gives how many there are in the list.

    See sprintf(3) for details on how the formatting is done. Some platforms support extensions to the standard C99 definition of this function. None of those are supported by Perl. For example, neither "'" (to get digit grouping), nor "I" (to get alternate digits) are supported.

    Also, argument reordering (using format specifiers like "%2$d" or "%*2$d") is supported only when using the "svargs" array of SVs; an exception is raised if "arg" is not NULL and "pat" contains the "$" reordering specifier.

    "* maybe_tainted" is supposed to be set when running with taint checks enabled if the results are untrustworthy (often due to the use of locales). However, this is not currently implemented. This argument is not used.

    "patlen" gives the length in bytes of "pat". Currently, the pattern must be NUL-terminated anyway.

    "flags" is used to specify which magic to handle or to skip, by setting or clearing the "SV_GMAGIC" and/or SV_SMAGIC flags.

    Plain "sv_vcatpvfn" just calls "sv_vcatpvfn_flags" setting both the "SV_GMAGIC" and SV_SMAGIC flags, so it always handles both set and get magic.

    All the remaining forms handle 'get' magic; the forms whose name contains "_mg" additionally handle 'set' magic.

    When using the "svargs" array, if any of the SVs in it have their UTF-8 flag set, "sv" will be converted to be so too, as necessary.

    None of the remaining forms use the "svargs" array, meaning argument reordering is not possible with them. The arguments are generally considered to be the same UTF8ness as the destination "sv", though certain Perl extensions to the standard set of %formats can override this (see "Formatted Printing of Strings" in perlguts and adjacent sections).

    The forms whose name contains "_no_context" do not take a thread context ("aTHX") parameter, so are used in situations where the caller doesn't already have the thread context.

    The forms whose name contains "vcat" use an encapsulated argument list, the other forms use "sprintf"-style arguments.

    There are no other differences between the forms.

     void  Perl_sv_catpvf             (pTHX_ SV * const sv,
                                             const char * const pat,
                                             ...)
     void       sv_catpvf_nocontext   (      SV * const sv,
                                             const char * const pat,
                                             ...)
     void  Perl_sv_catpvf_nocontext   (      SV * const sv,
                                             const char * const pat,
                                             ...)
     void  Perl_sv_catpvf_mg          (pTHX_ SV * const sv,
                                             const char * const pat,
                                             ...)
     void       sv_catpvf_mg_nocontext(      SV * const sv,
                                             const char * const pat,
                                             ...)
     void  Perl_sv_catpvf_mg_nocontext(      SV * const sv,
                                             const char * const pat,
                                             ...)
     void       sv_vcatpvf            (      SV * const sv,
                                             const char * const pat,
                                             va_list * const args)
     void  Perl_sv_vcatpvf            (pTHX_ SV * const sv,
                                             const char * const pat,
                                             va_list * const args)
     void       sv_vcatpvf_mg         (      SV * const sv,
                                             const char * const pat,
                                             va_list * const args)
     void  Perl_sv_vcatpvf_mg         (pTHX_ SV * const sv,
                                             const char * const pat,
                                             va_list * const args)
     void       sv_vcatpvfn           (    SV * const sv,
                                           const char * const pat,
                                           const STRLEN patlen,
                                           va_list * const args,
                                           SV ** const svargs,
                                           const Size_t sv_count,
                                           bool * const maybe_tainted)
     void  Perl_sv_vcatpvfn           (pTHX_ SV * const sv,
                                           const char * const pat,
                                           const STRLEN patlen,
                                           va_list * const args,
                                           SV ** const svargs,
                                           const Size_t sv_count,
                                           bool * const maybe_tainted)
     void       sv_vcatpvfn_flags     (    SV * const sv,
                                           const char * const pat,
                                           const STRLEN patlen,
                                           va_list * const args,
                                           SV ** const svargs,
                                           const Size_t sv_count,
                                           bool * const maybe_tainted,
                                           const U32 flags)
     void  Perl_sv_vcatpvfn_flags     (pTHX_ SV * const sv,
                                           const char * const pat,
                                           const STRLEN patlen,
                                           va_list * const args,
                                           SV ** const svargs,
                                           const Size_t sv_count,
                                           bool * const maybe_tainted,
                                           const U32 flags)

"sv_catpvn*"
"sv_catpvn_flags*"
"sv_catpvn_mg*"
"sv_catpvn_nomg*"
"sv_catpvn_nomg_maybeutf8*"
"sv_catpvs*"
"sv_catpvs_flags*"
"sv_catpvs_mg*"
"sv_catpvs_nomg*"
    Described under "sv_catpv"

"sv_catsv"
"sv_catsv_flags"
"sv_catsv_mg"
"sv_catsv_nomg"
    These concatenate the string from SV "sstr" onto the end of the string in SV "dsv". If "sstr" is null, these are no-ops; otherwise only "dsv" is modified.

    They differ only in what magic they perform:

    "sv_catsv_mg" performs 'get' magic on both SVs before the copy, and 'set' magic on "dsv" afterwards.

    "sv_catsv" performs just 'get' magic, on both SVs.

    "sv_catsv_nomg" skips all magic.

    "sv_catsv_flags" has an extra "flags" parameter which allows you to use "SV_GMAGIC" and/or "SV_SMAGIC" to specify any combination of magic handling (although either both or neither SV will have 'get' magic applied to it.)

    "sv_catsv", "sv_catsv_mg", and "sv_catsv_nomg" are implemented in terms of "sv_catsv_flags".

     void       sv_catsv      (      SV * const dsv, SV * const sstr)
     void  Perl_sv_catsv      (pTHX_ SV * const dsv, SV * const sstr)
     void       sv_catsv_flags(      SV * const dsv, SV * const sstr,
                                     const I32 flags)
     void  Perl_sv_catsv_flags(pTHX_ SV * const dsv, SV * const sstr,
                                     const I32 flags)
     void       sv_catsv_mg   (      SV * const dsv, SV * const sstr)
     void  Perl_sv_catsv_mg   (pTHX_ SV * const dsv, SV * const sstr)
     void       sv_catsv_nomg (      SV * const dsv, SV * const sstr)

"SV_CHECK_THINKFIRST"
    Remove any encumbrances from "sv", that need to be taken care of before it is modifiable. For example if it is Copy on Write (COW), now is the time to make that copy.

    If you know that you are about to change the PV value of "sv", instead use ""SV_CHECK_THINKFIRST_COW_DROP"" to avoid the write that would be immediately written again.

     void  SV_CHECK_THINKFIRST(SV * sv)

"SV_CHECK_THINKFIRST_COW_DROP"
    Call this when you are about to replace the PV value in "sv", which is potentially copy-on-write. It stops any sharing with other SVs, so that no Copy on Write (COW) actually happens. This COW would be useless, as it would immediately get changed to something else. This function also removes any other encumbrances that would be problematic when changing "sv".

     void  SV_CHECK_THINKFIRST_COW_DROP(SV * sv)

"sv_chop"
    Efficient removal of characters from the beginning of the string buffer. SvPOK(sv), or at least SvPOKp(sv), must be true and "ptr" must be a pointer to somewhere inside the string buffer. "ptr" becomes the first character of the adjusted string. Uses the "OOK" hack. On return, only SvPOK(sv) and SvPOKp(sv) among the "OK" flags will be true.

    Beware: after this function returns, "ptr" and SvPVX_const(sv) may no longer refer to the same chunk of data.

    The unfortunate similarity of this function's name to that of Perl's "chop" operator is strictly coincidental. This function works from the left; "chop" works from the right.

     void       sv_chop(      SV * const sv, const char * const ptr)
     void  Perl_sv_chop(pTHX_ SV * const sv, const char * const ptr)

"sv_clear"
    Clear an SV: call any destructors, free up any memory used by the body, and free the body itself. The SV's head is not freed, although its type is set to all 1's so that it won't inadvertently be assumed to be live during global destruction etc. This function should only be called when "REFCNT" is zero. Most of the time you'll want to call "SvREFCNT_dec" instead.

     void       sv_clear(      SV * const orig_sv)
     void  Perl_sv_clear(pTHX_ SV * const orig_sv)

"sv_cmp"
"sv_cmp_flags"
    These each compare the strings in two SVs, returning -1, 0, or 1 indicating whether the string in "sv1" is less than, equal to, or greater than the string in "sv2". They are UTF-8 and 'use bytes' aware, and will coerce their arguments to strings if necessary.

    "sv_cmp" always handles 'get' magic. "sv_cmp_flags" only does so if "flags" contains "SV_GMAGIC". Otherwise, the two forms behave identically.

    See also "sv_cmp_locale".

     I32       sv_cmp      (      SV * const sv1, SV * const sv2)
     I32  Perl_sv_cmp      (pTHX_ SV * const sv1, SV * const sv2)
     I32       sv_cmp_flags(      SV * const sv1, SV * const sv2,
                                  const U32 flags)
     I32  Perl_sv_cmp_flags(pTHX_ SV * const sv1, SV * const sv2,
                                  const U32 flags)

"sv_cmp_locale"
"sv_cmp_locale_flags"
    These each compare the strings in two SVs in a locale-aware manner, returning -1, 0, or 1 indicating whether the string in "sv1" is less than, equal to, or greater than the string in "sv2".

    They are UTF-8 and 'use bytes' aware, and will coerce their args to strings if necessary.

    "sv_cmp_locale" always handles 'get' magic. "sv_cmp_locale_flags" only does so if "flags" contains "SV_GMAGIC". Otherwise, the two forms behave identically.

    See also "sv_cmp".

     I32       sv_cmp_locale      (      SV * const sv1,
                                         SV * const sv2)
     I32  Perl_sv_cmp_locale      (pTHX_ SV * const sv1,
                                         SV * const sv2)
     I32       sv_cmp_locale_flags(      SV * const sv1,
                                         SV * const sv2,
                                         const U32 flags)
     I32  Perl_sv_cmp_locale_flags(pTHX_ SV * const sv1,
                                         SV * const sv2,
                                         const U32 flags)

"sv_collxfrm"
"sv_collxfrm_flags"
    These each add Collate Transform magic to an SV if it doesn't already have it.

    Any scalar variable may carry "PERL_MAGIC_collxfrm" magic that contains the scalar data of the variable, but transformed to such a format that a normal memory comparison can be used to compare the data according to the locale settings.

    "sv_collxfrm" always handles 'get' magic. "sv_collxfrm_flags" only does so if "flags" contains "SV_GMAGIC". Otherwise, the two forms behave identically.

     char *       sv_collxfrm      (      SV * const sv,
                                          STRLEN * const nxp)
     char *  Perl_sv_collxfrm      (pTHX_ SV * const sv,
                                          STRLEN * const nxp)
     char *       sv_collxfrm_flags(      SV * const sv,
                                          STRLEN * const nxp,
                                          I32 const flags)
     char *  Perl_sv_collxfrm_flags(pTHX_ SV * const sv,
                                          STRLEN * const nxp,
                                          I32 const flags)

"sv_copypv"
"sv_copypv_flags"
"sv_copypv_nomg"
    These copy a stringified representation of the source SV into the destination SV. They automatically perform coercion of numeric values into strings. Guaranteed to preserve the "UTF8" flag even from overloaded objects. Similar in nature to "sv_2pv[_flags]" but they operate directly on an SV instead of just the string. Mostly they use ""sv_2pv_flags"" to do the work, except when that would lose the UTF-8'ness of the PV.

    The three forms differ only in whether or not they perform 'get magic' on "sv". "sv_copypv_nomg" skips 'get magic'; "sv_copypv" performs it; and "sv_copypv_flags" either performs it (if the "SV_GMAGIC" bit is set in "flags") or doesn't (if that bit is cleared).

     void       sv_copypv      (      SV * const dsv, SV * const ssv)
     void  Perl_sv_copypv      (pTHX_ SV * const dsv, SV * const ssv)
     void       sv_copypv_flags(      SV * const dsv, SV * const ssv,
                                      const I32 flags)
     void  Perl_sv_copypv_flags(pTHX_ SV * const dsv, SV * const ssv,
                                      const I32 flags)
     void       sv_copypv_nomg (      SV * const dsv, SV * const ssv)

"sv_dec"
"sv_dec_nomg"
    These auto-decrement the value in the SV, doing string to numeric conversion if necessary. They both handle operator overloading.

    They differ only in that:

    "sv_dec" handles 'get' magic; "sv_dec_nomg" skips 'get' magic.

     void       sv_dec     (      SV * const sv)
     void  Perl_sv_dec     (pTHX_ SV * const sv)
     void       sv_dec_nomg(      SV * const sv)
     void  Perl_sv_dec_nomg(pTHX_ SV * const sv)

"sv_derived_from"
"sv_derived_from_hv"
"sv_derived_from_pv"
"sv_derived_from_pvn"
"sv_derived_from_sv"
    These each return a boolean indicating whether "sv" is derived from the specified class at the C level. To check derivation at the Perl level, call isa() as a normal Perl method.

    In "sv_derived_from_hv", the class name is HvNAME(hv) (which would presumably represent a stash). Its UTF8ness is HvNAMEUTF8(hv).

    In "sv_derived_from" and "sv_derived_from_pv", the class name is given by "name", which is a NUL-terminated C string. In "sv_derived_from", the name is never considered to be encoded as UTF-8.

    The remaining forms differ only in how the class name is specified; they all have a "flags" parameter. Currently, the only significant value for which is "SVf_UTF8" to indicate that the class name is encoded as such.

    In "sv_derived_from_sv", the class name is extracted from "namesv". This is the preferred form. The class name is considered to be in UTF-8 if "namesv" is marked as such.

    In "sv_derived_from_pvn", "len" gives the length of "name", so the latter may contain embedded NUL characters.

     bool       sv_derived_from    (      SV *sv,
                                          const char * const name)
     bool  Perl_sv_derived_from    (pTHX_ SV *sv,
                                          const char * const name)
     bool       sv_derived_from_hv (      SV *sv, HV *hv)
     bool  Perl_sv_derived_from_hv (pTHX_ SV *sv, HV *hv)
     bool       sv_derived_from_pv (      SV *sv,
                                          const char * const name,
                                          U32 flags)
     bool  Perl_sv_derived_from_pv (pTHX_ SV *sv,
                                          const char * const name,
                                          U32 flags)
     bool       sv_derived_from_pvn(      SV *sv,
                                          const char * const name,
                                          const STRLEN len, U32 flags)
     bool  Perl_sv_derived_from_pvn(pTHX_ SV *sv,
                                          const char * const name,
                                          const STRLEN len, U32 flags)
     bool       sv_derived_from_sv (      SV *sv, SV *namesv,
                                          U32 flags)
     bool  Perl_sv_derived_from_sv (pTHX_ SV *sv, SV *namesv,
                                          U32 flags)

"sv_does"
    Like "sv_does_pv", but doesn't take a "flags" parameter.

     bool       sv_does(      SV *sv, const char * const name)
     bool  Perl_sv_does(pTHX_ SV *sv, const char * const name)

"sv_does_pv"
    Like "sv_does_sv", but takes a nul-terminated string instead of an SV.

     bool       sv_does_pv(      SV *sv, const char * const name,
                                 U32 flags)
     bool  Perl_sv_does_pv(pTHX_ SV *sv, const char * const name,
                                 U32 flags)

"sv_does_pvn"
    Like "sv_does_sv", but takes a string/length pair instead of an SV.

     bool       sv_does_pvn(      SV *sv, const char * const name,
                                  const STRLEN len, U32 flags)
     bool  Perl_sv_does_pvn(pTHX_ SV *sv, const char * const name,
                                  const STRLEN len, U32 flags)

"sv_does_sv"
    Returns a boolean indicating whether the SV performs a specific, named role. The SV can be a Perl object or the name of a Perl class.

     bool       sv_does_sv(      SV *sv, SV *namesv, U32 flags)
     bool  Perl_sv_does_sv(pTHX_ SV *sv, SV *namesv, U32 flags)

"sv_eq"
"sv_eq_flags"
    These each return a boolean indicating whether or not the strings in the two SVs are equal. If 'use bytes' is in effect, the comparison is byte-by-byte; otherwise character-by-character. Each will coerce its args to strings if necessary.

    They differ only in that "sv_eq" always processes get magic, while "sv_eq_flags" processes get magic only when the "flags" parameter has the "SV_GMAGIC" bit set.

    These functions do not handle operator overloading. For versions that do, see instead "sv_streq" or "sv_streq_flags".

     I32       sv_eq      (      SV *sv1, SV *sv2)
     I32  Perl_sv_eq      (pTHX_ SV *sv1, SV *sv2)
     I32       sv_eq_flags(      SV *sv1, SV *sv2, const U32 flags)
     I32  Perl_sv_eq_flags(pTHX_ SV *sv1, SV *sv2, const U32 flags)

"sv_force_normal"
"sv_force_normal_flags"
    Undo various types of fakery on an SV, where fakery means "more than" a string:

    if the PV is a shared string
        make a private copy

    if we're a ref
        stop refing. This is done by calling "sv_unref_flags". In "sv_force_normal_flags", the "flags" parameter gets passed to that function.

    if we're a glob
        downgrade to an "xpvmg";

    if we're a copy-on-write scalar
        this is the on-write time when we do the copy, and is also used locally

    if this is a vstring
        drop the vstring magic

    in "sv_force_normal_flags" if "SV_COW_DROP_PV" is set in "flags"
        a copy-on-write scalar drops its PV buffer (if any) and becomes "SvPOK_off" rather than making a copy. (Used where this scalar is about to be set to some other value.)

    Other than what was mentioned above, the two forms behave identically. This is because "sv_force_normal" merely calls "sv_force_normal_flags" with "flags" set to 0.

     void       sv_force_normal      (      SV *sv)
     void  Perl_sv_force_normal      (pTHX_ SV *sv)
     void       sv_force_normal_flags(      SV * const sv,
                                            const U32 flags)
     void  Perl_sv_force_normal_flags(pTHX_ SV * const sv,
                                            const U32 flags)

"sv_free"
    Decrement an SV's reference count, and if it drops to zero, call "sv_clear" to invoke destructors and free up any memory used by the body; finally, deallocating the SV's head itself. Normally called via a wrapper macro "SvREFCNT_dec".

     void       sv_free(      SV * const sv)
     void  Perl_sv_free(pTHX_ SV * const sv)

"sv_get_backrefs"
    NOTE: "sv_get_backrefs" is experimental and may change or be removed without notice.

    If "sv" is the target of a weak reference then it returns the back references structure associated with the sv; otherwise return "NULL".

    When returning a non-null result the type of the return is relevant. If it is an AV then the elements of the AV are the weak reference RVs which point at this item. If it is any other type then the item itself is the weak reference.

    See also Perl_sv_add_backref(), Perl_sv_del_backref(), Perl_sv_kill_backrefs()

     SV *       sv_get_backrefs(SV * const sv)
     SV *  Perl_sv_get_backrefs(SV * const sv)

"sv_gets"
    Get a line from the filehandle and store it into the SV, optionally appending to the currently-stored string. If "append" is not 0, the line is appended to the SV instead of overwriting it. "append" should be set to the byte offset that the appended string should start at in the SV (typically, SvCUR(sv) is a suitable choice).

     char *       sv_gets(      SV * const sv, PerlIO * const fp,
                                SSize_t append)
     char *  Perl_sv_gets(pTHX_ SV * const sv, PerlIO * const fp,
                                SSize_t append)

"sv_inc"
"sv_inc_nomg"
    These auto-increment the value in the SV, doing string to numeric conversion if necessary. They both handle operator overloading.

    They differ only in that "sv_inc" performs 'get' magic; "sv_inc_nomg" skips any magic.

     void       sv_inc     (      SV * const sv)
     void  Perl_sv_inc     (pTHX_ SV * const sv)
     void       sv_inc_nomg(      SV * const sv)
     void  Perl_sv_inc_nomg(pTHX_ SV * const sv)

"sv_insert"
"sv_insert_flags"
    These insert and/or replace a string at the specified offset/length within the SV. Similar to the Perl substr() function, with "littlelen" bytes starting at "little" replacing "len" bytes of the string in "bigstr" starting at "offset". They handle get magic.

    "sv_insert_flags" is identical to plain "sv_insert", but the extra "flags" are passed to the "SvPV_force_flags" operation that is internally applied to "bigstr".

     void       sv_insert      (      SV * const bigstr,
                                      const STRLEN offset,
                                      const STRLEN len,
                                      const char * const little,
                                      const STRLEN littlelen)
     void  Perl_sv_insert      (pTHX_ SV * const bigstr,
                                      const STRLEN offset,
                                      const STRLEN len,
                                      const char * const little,
                                      const STRLEN littlelen)
     void       sv_insert_flags(      SV * const bigstr,
                                      const STRLEN offset,
                                      const STRLEN len,
                                      const char *little,
                                      const STRLEN littlelen,
                                      const U32 flags)
     void  Perl_sv_insert_flags(pTHX_ SV * const bigstr,
                                      const STRLEN offset,
                                      const STRLEN len,
                                      const char *little,
                                      const STRLEN littlelen,
                                      const U32 flags)

"sv_isa"
    Returns a boolean indicating whether the SV is blessed into the specified class.

    This does not check for subtypes or method overloading. Use "sv_isa_sv" to verify an inheritance relationship in the same way as the "isa" operator by respecting any isa() method overloading; or "sv_derived_from_sv" to test directly on the actual object type.

     int       sv_isa(      SV *sv, const char * const name)
     int  Perl_sv_isa(pTHX_ SV *sv, const char * const name)

"sv_isa_sv"
    Returns a boolean indicating whether the SV is an object reference and is derived from the specified class, respecting any isa() method overloading it may have. Returns false if "sv" is not a reference to an object, or is not derived from the specified class.

    This is the function used to implement the behaviour of the "isa" operator.

    Does not invoke magic on "sv".

    Not to be confused with the older "sv_isa" function, which does not use an overloaded isa() method, nor will check subclassing.

     bool       sv_isa_sv(      SV *sv, SV *namesv)
     bool  Perl_sv_isa_sv(pTHX_ SV *sv, SV *namesv)

"sv_isobject"
    Returns a boolean indicating whether the SV is an RV pointing to a blessed object. If the SV is not an RV, or if the object is not blessed, then this will return false.

     int       sv_isobject(      SV *sv)
     int  Perl_sv_isobject(pTHX_ SV *sv)

"sv_len"
    Returns the length of the string in the SV. Handles magic and type coercion and sets the UTF8 flag appropriately. See also "SvCUR", which gives raw access to the "xpv_cur" slot.

     STRLEN       sv_len(      SV * const sv)
     STRLEN  Perl_sv_len(pTHX_ SV * const sv)

"sv_len_utf8"
"sv_len_utf8_nomg"
    These return the number of characters in the string in an SV, counting wide UTF-8 bytes as a single character. Both handle type coercion. They differ only in that "sv_len_utf8" performs 'get' magic; "sv_len_utf8_nomg" skips any magic.

     STRLEN       sv_len_utf8     (      SV * const sv)
     STRLEN  Perl_sv_len_utf8     (pTHX_ SV * const sv)
     STRLEN       sv_len_utf8_nomg(      SV * const sv)
     STRLEN  Perl_sv_len_utf8_nomg(pTHX_ SV * const sv)

"sv_magic"
    Adds magic to an SV. First upgrades "sv" to type "SVt_PVMG" if necessary, then adds a new magic item of type "how" to the head of the magic list.

    See "sv_magicext" (which "sv_magic" now calls) for a description of the handling of the "name" and "namlen" arguments.

    You need to use "sv_magicext" to add magic to "SvREADONLY" SVs and also to add more than one instance of the same "how".

     void       sv_magic(      SV * const sv, SV * const obj,
                               const int how, const char * const name,
                               const I32 namlen)
     void  Perl_sv_magic(pTHX_ SV * const sv, SV * const obj,
                               const int how, const char * const name,
                               const I32 namlen)

"sv_magicext"
    Adds magic to an SV, upgrading it if necessary. Applies the supplied "vtable" and returns a pointer to the magic added.

    Note that "sv_magicext" will allow things that "sv_magic" will not. In particular, you can add magic to "SvREADONLY" SVs, and add more than one instance of the same "how".

    If "namlen" is greater than zero then a "savepvn" copy of "name" is stored, if "namlen" is zero then "name" is stored as-is and - as another special case - if "(name && namlen == HEf_SVKEY)" then "name" is assumed to contain an SV* and is stored as-is with its "REFCNT" incremented.

    (This is now used as a subroutine by "sv_magic".)

     MAGIC *       sv_magicext(      SV * const sv, SV * const obj,
                                     const int how,
                                     const MGVTBL * const vtbl,
                                     const char * const name,
                                     const I32 namlen)
     MAGIC *  Perl_sv_magicext(pTHX_ SV * const sv, SV * const obj,
                                     const int how,
                                     const MGVTBL * const vtbl,
                                     const char * const name,
                                     const I32 namlen)

"sv_mortalcopy"
"sv_mortalcopy_flags"
    These each create a new SV which is a copy of the original SV (using "sv_setsv"). The new SV is marked as mortal. It will be destroyed "soon", either by an explicit call to "FREETMPS", or by an implicit call at places such as statement boundaries. See also "sv_newmortal" and "sv_2mortal".

    The two forms are identical, except "sv_mortalcopy_flags" has an extra "flags" parameter, the contents of which are passed along to "sv_setsv_flags".

     SV *       sv_mortalcopy      (      SV * const oldsv)
     SV *  Perl_sv_mortalcopy      (pTHX_ SV * const oldsv)
     SV *       sv_mortalcopy_flags(      SV * const oldsv, U32 flags)
     SV *  Perl_sv_mortalcopy_flags(pTHX_ SV * const oldsv, U32 flags)

"sv_newmortal"
    Creates a new null SV which is mortal. The reference count of the SV is set to 1. It will be destroyed "soon", either by an explicit call to "FREETMPS", or by an implicit call at places such as statement boundaries. See also "sv_mortalcopy" and "sv_2mortal".

     SV *       sv_newmortal()
     SV *  Perl_sv_newmortal(pTHX)

"sv_nolocking"
    "DEPRECATED!" It is planned to remove "sv_nolocking" from a future release of Perl. Do not use it for new code; remove it from existing code.

    Dummy routine which "locks" an SV when there is no locking module present. Exists to avoid test for a "NULL" function pointer and because it could potentially warn under some level of strict-ness.

    "Superseded" by sv_nosharing().

     void       sv_nolocking(      SV *sv)
     void  Perl_sv_nolocking(pTHX_ SV *sv)

"sv_nounlocking"
    "DEPRECATED!" It is planned to remove "sv_nounlocking" from a future release of Perl. Do not use it for new code; remove it from existing code.

    Dummy routine which "unlocks" an SV when there is no locking module present. Exists to avoid test for a "NULL" function pointer and because it could potentially warn under some level of strict-ness.

    "Superseded" by sv_nosharing().

     void       sv_nounlocking(      SV *sv)
     void  Perl_sv_nounlocking(pTHX_ SV *sv)

"sv_numeq"
"sv_numeq_flags"
    These each return a boolean indicating whether the numbers in the two SV arguments are identical. Those arguments will be coerced to numbers if necessary. A "NULL" SV is treated as "undef".

    In "sv_numeq_flags", if "flags" has the "SV_GMAGIC" bit set, 'get' magic is handled.

    And unless "flags" has the "SV_SKIP_OVERLOAD" bit set, an attempt to use "==" overloading will be made. If such overloading does not exist or the flag is set, then regular numerical comparison will be used instead.

    "sv_numeq" merely calls "sv_numeq_flags" with just the "SV_GMAGIC" bit set. This function basically behaves like the Perl code "$sv1 == $sv2".

     bool       sv_numeq      (      SV *sv1, SV *sv2)
     bool       sv_numeq_flags(      SV *sv1, SV *sv2,
                                     const U32 flags)
     bool  Perl_sv_numeq_flags(pTHX_ SV *sv1, SV *sv2,
                                     const U32 flags)

"sv_pos_b2u"
"sv_pos_b2u_flags"
    These each count the number of UTF-8 encoded characters in the PV of "sv". The entire PV is not necessarily looked at, just the first so-many bytes. The byte count is given by *offsetp in "sv_pos_b2u", and by "offset" in "sv_pos_b2u_flags".

    The caller must ensure that the PV contains at least as many bytes as the count passed in.

    "sv_pos_b2u" returns "void", instead updating *offsetp to the character count. "sv_pos_b2u_flags" returns the character count.

    "sv_pos_b2u_flags" is preferred as "offsetp" is a *I32, which limits the size it can handle to 2Gb.

    Both handle type coercion.

    "sv_pos_b2u" always handles 'get' magic. "sv_pos_b2u_flags" only handles 'get' magic when "flags" contains "SV_GMAGIC".

    In fact, "sv_pos_b2u_flags" passes "flags" to "SvPV_flags", and "flags" usually should be "SV_GMAGIC|SV_CONST_RETURN". "sv_pos_b2u" automatically causes "SV_CONST_RETURN" to be passed to "SvPV_flags".

    Both functions use and update "PERL_MAGIC_utf8".

     void         sv_pos_b2u      (      SV * const sv,
                                         I32 * const offsetp)
     void    Perl_sv_pos_b2u      (pTHX_ SV * const sv,
                                         I32 * const offsetp)
     STRLEN       sv_pos_b2u_flags(      SV * const sv,
                                         STRLEN const offset,
                                         U32 flags)
     STRLEN  Perl_sv_pos_b2u_flags(pTHX_ SV * const sv,
                                         STRLEN const offset,
                                         U32 flags)

"sv_pos_u2b"
"sv_pos_u2b_flags"
    These each find out how many bytes are occupied by the first so-many UTF-8-encoded characters in the PV of "sv". The character count is passed by *offsetp in "sv_pos_u2b", and by "uoffset" in "sv_pos_u2b_flags".

    Optionally, they also count how many bytes are in the next so-many UTF-8-encoded characters. This option is chosen in both functions by passing a non-NULL "lenp" to them, and setting *lenp to the desired character count. The functions update *lenp with the byte count.

    "sv_pos_u2b" returns "void", instead updating *offsetp to the byte count. "sv_pos_u2b_flags" returns the byte count.

    "sv_pos_u2b_flags" is preferred as "offsetp" is a *I32, which limits the size it can handle to 2Gb.

    Both handle type coercion.

    "sv_pos_u2b" always handles 'get' magic. "sv_pos_u2b_flags" only handles 'get' magic when "flags" contains "SV_GMAGIC".

    In fact, "sv_pos_u2b_flags" passes "flags" to "SvPV_flags", and "flags" usually should be "SV_GMAGIC|SV_CONST_RETURN". "sv_pos_u2b" automatically causes "SV_CONST_RETURN" to be passed to "SvPV_flags".

    Both functions use and update "PERL_MAGIC_utf8".

     void         sv_pos_u2b      (      SV * const sv,
                                         I32 * const offsetp,
                                         I32 * const lenp)
     void    Perl_sv_pos_u2b      (pTHX_ SV * const sv,
                                         I32 * const offsetp,
                                         I32 * const lenp)
     STRLEN       sv_pos_u2b_flags(      SV * const sv,
                                         STRLEN uoffset,
                                         STRLEN * const lenp,
                                         U32 flags)
     STRLEN  Perl_sv_pos_u2b_flags(pTHX_ SV * const sv,
                                         STRLEN uoffset,
                                         STRLEN * const lenp,
                                         U32 flags)

"sv_pvn_force_flags"
    Get a sensible string out of the SV somehow. If "flags" has the "SV_GMAGIC" bit set, will "mg_get" on "sv" if appropriate, else not. "sv_pvn_force" and "sv_pvn_force_nomg" are implemented in terms of this function. You normally want to use the various wrapper macros instead: see "SvPV_force" and "SvPV_force_nomg".

     char *       sv_pvn_force_flags(      SV * const sv,
                                           STRLEN * const lp,
                                           const U32 flags)
     char *  Perl_sv_pvn_force_flags(pTHX_ SV * const sv,
                                           STRLEN * const lp,
                                           const U32 flags)

"sv_ref"
    Returns a SV describing what the SV passed in is a reference to.

    dst can be a SV to be set to the description or NULL, in which case a mortal SV is returned.

    If ob is true and the SV is blessed, the description is the class name, otherwise it is the type of the SV, "SCALAR", "ARRAY" etc.

     SV *       sv_ref(      SV *dst, const SV * const sv,
                             const int ob)
     SV *  Perl_sv_ref(pTHX_ SV *dst, const SV * const sv,
                             const int ob)

"sv_reftype"
    Returns a string describing what the SV is a reference to.

    If ob is true and the SV is blessed, the string is the class name, otherwise it is the type of the SV, "SCALAR", "ARRAY" etc.

     const char *       sv_reftype(      const SV * const sv,
                                         const int ob)
     const char *  Perl_sv_reftype(pTHX_ const SV * const sv,
                                         const int ob)

"sv_replace"
    Make the first argument a copy of the second, then delete the original. The target SV physically takes over ownership of the body of the source SV and inherits its flags; however, the target keeps any magic it owns, and any magic in the source is discarded. Note that this is a rather specialist SV copying operation; most of the time you'll want to use "sv_setsv" or one of its many macro front-ends.

     void       sv_replace(      SV * const sv, SV * const nsv)
     void  Perl_sv_replace(pTHX_ SV * const sv, SV * const nsv)

"sv_report_used"
    Dump the contents of all SVs not yet freed (debugging aid).

     void       sv_report_used()
     void  Perl_sv_report_used(pTHX)

"sv_reset"
    Underlying implementation for the "reset" Perl function. Note that the perl-level function is vaguely deprecated.

     void       sv_reset(      const char *s, HV * const stash)
     void  Perl_sv_reset(pTHX_ const char *s, HV * const stash)

"sv_rvunweaken"
    Unweaken a reference: Clear the "SvWEAKREF" flag on this RV; remove the backreference to this RV from the array of backreferences associated with the target SV, increment the refcount of the target. Silently ignores "undef" and warns on non-weak references.

     SV *       sv_rvunweaken(      SV * const sv)
     SV *  Perl_sv_rvunweaken(pTHX_ SV * const sv)

"sv_rvweaken"
    Weaken a reference: set the "SvWEAKREF" flag on this RV; give the referred-to SV "PERL_MAGIC_backref" magic if it hasn't already; and push a back-reference to this RV onto the array of backreferences associated with that magic. If the RV is magical, set magic will be called after the RV is cleared. Silently ignores "undef" and warns on already-weak references.

     SV *       sv_rvweaken(      SV * const sv)
     SV *  Perl_sv_rvweaken(pTHX_ SV * const sv)

"sv_set_bool"
    Equivalent to "sv_setsv(sv, bool_val ? &Pl_sv_yes : &PL_sv_no)", but may be made more efficient in the future. Doesn't handle set magic.

    The perl equivalent is "$sv = !!$expr;".

    Introduced in perl 5.35.11.

     void       sv_set_bool(      SV *sv, const bool bool_val)
     void  Perl_sv_set_bool(pTHX_ SV *sv, const bool bool_val)

"sv_set_false"
    Equivalent to "sv_setsv(sv, &PL_sv_no)", but may be made more efficient in the future. Doesn't handle set magic.

    The perl equivalent is "$sv = !1;".

    Introduced in perl 5.35.11.

     void       sv_set_false(      SV *sv)
     void  Perl_sv_set_false(pTHX_ SV *sv)

"sv_set_true"
    Equivalent to "sv_setsv(sv, &PL_sv_yes)", but may be made more efficient in the future. Doesn't handle set magic.

    The perl equivalent is "$sv = !0;".

    Introduced in perl 5.35.11.

     void       sv_set_true(      SV *sv)
     void  Perl_sv_set_true(pTHX_ SV *sv)

"sv_set_undef"
    Equivalent to "sv_setsv(sv, &PL_sv_undef)", but more efficient. Doesn't handle set magic.

    The perl equivalent is "$sv = undef;". Note that it doesn't free any string buffer, unlike "undef $sv".

    Introduced in perl 5.25.12.

     void       sv_set_undef(      SV *sv)
     void  Perl_sv_set_undef(pTHX_ SV *sv)

"sv_setbool"
"sv_setbool_mg"
    These set an SV to a true or false boolean value, upgrading first if necessary.

    They differ only in that "sv_setbool_mg" handles 'set' magic; "sv_setbool" does not.

     void  sv_setbool   (SV *sv, bool b)
     void  sv_setbool_mg(SV *sv, bool b)

"sv_setiv"
"sv_setiv_mg"
    These copy an integer into the given SV, upgrading first if necessary.

    They differ only in that "sv_setiv_mg" handles 'set' magic; "sv_setiv" does not.

     void       sv_setiv   (      SV * const sv, const IV num)
     void  Perl_sv_setiv   (pTHX_ SV * const sv, const IV num)
     void       sv_setiv_mg(      SV * const sv, const IV i)
     void  Perl_sv_setiv_mg(pTHX_ SV * const sv, const IV i)

"sv_setnv"
"sv_setnv_mg"
    These copy a double into the given SV, upgrading first if necessary.

    They differ only in that "sv_setnv_mg" handles 'set' magic; "sv_setnv" does not.

     void       sv_setnv   (      SV * const sv, const NV num)
     void  Perl_sv_setnv   (pTHX_ SV * const sv, const NV num)
     void       sv_setnv_mg(      SV * const sv, const NV num)
     void  Perl_sv_setnv_mg(pTHX_ SV * const sv, const NV num)

"sv_setpv"
"sv_setpv_mg"
"sv_setpvn"
"sv_setpvn_fresh"
"sv_setpvn_mg"
"sv_setpvs"
"sv_setpvs_mg"
    These copy a string into the SV "sv", making sure it is "SvPOK_only".

    In the "pvs" forms, the string must be a C literal string, enclosed in double quotes.

    In the "pvn" forms, the first byte of the string is pointed to by "ptr", and "len" indicates the number of bytes to be copied, potentially including embedded "NUL" characters.

    In the plain "pv" forms, "ptr" points to a NUL-terminated C string. That is, it points to the first byte of the string, and the copy proceeds up through the first encountered "NUL" byte.

    In the forms that take a "ptr" argument, if it is NULL, the SV will become undefined.

    The UTF-8 flag is not changed by these functions.

    A terminating NUL byte is guaranteed in the result.

    The "_mg" forms handle 'set' magic; the other forms skip all magic.

    "sv_setpvn_fresh" is a cut-down alternative to "sv_setpvn", intended ONLY to be used with a fresh sv that has been upgraded to a SVt_PV, SVt_PVIV, SVt_PVNV, or SVt_PVMG.

     void       sv_setpv       (      SV * const sv,
                                      const char * const ptr)
     void  Perl_sv_setpv       (pTHX_ SV * const sv,
                                      const char * const ptr)
     void       sv_setpv_mg    (      SV * const sv,
                                      const char * const ptr)
     void  Perl_sv_setpv_mg    (pTHX_ SV * const sv,
                                      const char * const ptr)
     void       sv_setpvn      (      SV * const sv,
                                      const char * const ptr,
                                      const STRLEN len)
     void  Perl_sv_setpvn      (pTHX_ SV * const sv,
                                      const char * const ptr,
                                      const STRLEN len)
     void       sv_setpvn_fresh(      SV * const sv,
                                      const char * const ptr,
                                      const STRLEN len)
     void  Perl_sv_setpvn_fresh(pTHX_ SV * const sv,
                                      const char * const ptr,
                                      const STRLEN len)
     void       sv_setpvn_mg   (      SV * const sv,
                                      const char * const ptr,
                                      const STRLEN len)
     void  Perl_sv_setpvn_mg   (pTHX_ SV * const sv,
                                      const char * const ptr,
                                      const STRLEN len)
     void       sv_setpvs      (      SV *const sv, "literal string")
     void       sv_setpvs_mg   (      SV *const sv, "literal string")

"sv_setpv_bufsize"
    Sets the SV to be a string of "cur" bytes length, with at least "len" bytes available. Ensures that there is a null byte at "SvEND".

    Returns a char * pointer to the SvPV buffer.

    The caller must set the first "cur" bytes of "sv" before the first use of its contents. This means that if "cur" is zero, the SV is immediately fully formed and ready to use, just like any other SV containing an empty string.

     char  *       sv_setpv_bufsize(      SV * const sv,
                                          const STRLEN cur,
                                          const STRLEN len)
     char  *  Perl_sv_setpv_bufsize(pTHX_ SV * const sv,
                                          const STRLEN cur,
                                          const STRLEN len)

"sv_setpv_mg*"
    Described under "sv_setpv"

"sv_setpvf"
"sv_setpvf_mg"
"sv_setpvf_mg_nocontext"
"sv_setpvf_nocontext"
    These work like "sv_catpvf" but copy the text into the SV instead of appending it.

    The differences between these are:

    "sv_setpvf_mg" and "sv_setpvf_mg_nocontext" perform 'set' magic; "sv_setpvf" and "sv_setpvf_nocontext" skip all magic.

    "sv_setpvf_nocontext" and "sv_setpvf_mg_nocontext" do not take a thread context ("aTHX") parameter, so are used in situations where the caller doesn't already have the thread context.

    The UTF-8 flag is not changed by these functions.

     void  Perl_sv_setpvf             (pTHX_ SV * const sv,
                                             const char * const pat,
                                             ...)
     void  Perl_sv_setpvf_mg          (pTHX_ SV * const sv,
                                             const char * const pat,
                                             ...)
     void       sv_setpvf_mg_nocontext(      SV * const sv,
                                             const char * const pat,
                                             ...)
     void  Perl_sv_setpvf_mg_nocontext(      SV * const sv,
                                             const char * const pat,
                                             ...)
     void       sv_setpvf_nocontext   (      SV * const sv,
                                             const char * const pat,
                                             ...)
     void  Perl_sv_setpvf_nocontext   (      SV * const sv,
                                             const char * const pat,
                                             ...)

"sv_setpvn*"
"sv_setpvn_fresh*"
"sv_setpvn_mg*"
"sv_setpvs*"
"sv_setpvs_mg*"
    Described under "sv_setpv"

"sv_setref_iv"
    Copies an integer into a new SV, optionally blessing the SV. The "rv" argument will be upgraded to an RV. That RV will be modified to point to the new SV. The "classname" argument indicates the package for the blessing. Set "classname" to "NULL" to avoid the blessing. The new SV will have a reference count of 1, and the RV will be returned.

     SV *       sv_setref_iv(      SV * const rv,
                                   const char * const classname,
                                   const IV iv)
     SV *  Perl_sv_setref_iv(pTHX_ SV * const rv,
                                   const char * const classname,
                                   const IV iv)

"sv_setref_nv"
    Copies a double into a new SV, optionally blessing the SV. The "rv" argument will be upgraded to an RV. That RV will be modified to point to the new SV. The "classname" argument indicates the package for the blessing. Set "classname" to "NULL" to avoid the blessing. The new SV will have a reference count of 1, and the RV will be returned.

     SV *       sv_setref_nv(      SV * const rv,
                                   const char * const classname,
                                   const NV nv)
     SV *  Perl_sv_setref_nv(pTHX_ SV * const rv,
                                   const char * const classname,
                                   const NV nv)

"sv_setref_pv"
    Copies a pointer into a new SV, optionally blessing the SV. The "rv" argument will be upgraded to an RV. That RV will be modified to point to the new SV. If the "pv" argument is "NULL", then "PL_sv_undef" will be placed into the SV. The "classname" argument indicates the package for the blessing. Set "classname" to "NULL" to avoid the blessing. The new SV will have a reference count of 1, and the RV will be returned.

    Do not use with other Perl types such as HV, AV, SV, CV, because those objects will become corrupted by the pointer copy process.

    Note that "sv_setref_pvn" copies the string while this copies the pointer.

     SV *       sv_setref_pv(      SV * const rv,
                                   const char * const classname,
                                   void * const pv)
     SV *  Perl_sv_setref_pv(pTHX_ SV * const rv,
                                   const char * const classname,
                                   void * const pv)

"sv_setref_pvn"
    Copies a string into a new SV, optionally blessing the SV. The length of the string must be specified with "n". The "rv" argument will be upgraded to an RV. That RV will be modified to point to the new SV. The "classname" argument indicates the package for the blessing. Set "classname" to "NULL" to avoid the blessing. The new SV will have a reference count of 1, and the RV will be returned.

    Note that "sv_setref_pv" copies the pointer while this copies the string.

     SV *       sv_setref_pvn(      SV * const rv,
                                    const char * const classname,
                                    const char * const pv,
                                    const STRLEN n)
     SV *  Perl_sv_setref_pvn(pTHX_ SV * const rv,
                                    const char * const classname,
                                    const char * const pv,
                                    const STRLEN n)

"sv_setref_pvs"
    Like "sv_setref_pvn", but takes a literal string instead of a string/length pair.

     SV *  sv_setref_pvs(SV *const rv, const char *const classname,
                         "literal string")

"sv_setref_uv"
    Copies an unsigned integer into a new SV, optionally blessing the SV. The "rv" argument will be upgraded to an RV. That RV will be modified to point to the new SV. The "classname" argument indicates the package for the blessing. Set "classname" to "NULL" to avoid the blessing. The new SV will have a reference count of 1, and the RV will be returned.

     SV *       sv_setref_uv(      SV * const rv,
                                   const char * const classname,
                                   const UV uv)
     SV *  Perl_sv_setref_uv(pTHX_ SV * const rv,
                                   const char * const classname,
                                   const UV uv)

"sv_setrv_inc"
"sv_setrv_inc_mg"
    As "sv_setrv_noinc" but increments the reference count of ref.

    "sv_setrv_inc_mg" will invoke 'set' magic on the SV; "sv_setrv_inc" will not.

     void       sv_setrv_inc   (      SV * const sv, SV * const ref)
     void  Perl_sv_setrv_inc   (pTHX_ SV * const sv, SV * const ref)
     void       sv_setrv_inc_mg(      SV * const sv, SV * const ref)
     void  Perl_sv_setrv_inc_mg(pTHX_ SV * const sv, SV * const ref)

"sv_setrv_noinc"
"sv_setrv_noinc_mg"
    Copies an SV pointer into the given SV as an SV reference, upgrading it if necessary. After this, SvRV(sv) is equal to ref. This does not adjust the reference count of ref. The reference ref must not be NULL.

    "sv_setrv_noinc_mg" will invoke 'set' magic on the SV; "sv_setrv_noinc" will not.

     void       sv_setrv_noinc   (      SV * const sv, SV * const ref)
     void  Perl_sv_setrv_noinc   (pTHX_ SV * const sv, SV * const ref)
     void       sv_setrv_noinc_mg(      SV * const sv, SV * const ref)
     void  Perl_sv_setrv_noinc_mg(pTHX_ SV * const sv, SV * const ref)

"sv_setsv"
"sv_setsv_flags"
"sv_setsv_mg"
"sv_setsv_nomg"
    These copy the contents of the source SV "ssv" into the destination SV "dsv". "ssv" may be destroyed if it is mortal, so don't use these functions if the source SV needs to be reused. Loosely speaking, they perform a copy-by-value, obliterating any previous content of the destination.

    They differ only in that:

    "sv_setsv" calls 'get' magic on "ssv", but skips 'set' magic on "dsv".

    "sv_setsv_mg" calls both 'get' magic on "ssv" and 'set' magic on "dsv".

    "sv_setsv_nomg" skips all magic.

    "sv_setsv_flags" has a "flags" parameter which you can use to specify any combination of magic handling, and also you can specify "SV_NOSTEAL" so that the buffers of temps will not be stolen.

    You probably want to instead use one of the assortment of wrappers, such as "SvSetSV", "SvSetSV_nosteal", "SvSetMagicSV" and "SvSetMagicSV_nosteal".

    "sv_setsv_flags" is the primary function for copying scalars, and most other copy-ish functions and macros use it underneath.

     void       sv_setsv      (      SV *dsv, SV *ssv)
     void  Perl_sv_setsv      (pTHX_ SV *dsv, SV *ssv)
     void       sv_setsv_flags(      SV *dsv, SV *ssv,
                                     const I32 flags)
     void  Perl_sv_setsv_flags(pTHX_ SV *dsv, SV *ssv,
                                     const I32 flags)
     void       sv_setsv_mg   (      SV * const dsv, SV * const ssv)
     void  Perl_sv_setsv_mg   (pTHX_ SV * const dsv, SV * const ssv)
     void       sv_setsv_nomg (      SV *dsv, SV *ssv)

"sv_setuv"
"sv_setuv_mg"
    These copy an unsigned integer into the given SV, upgrading first if necessary.

    They differ only in that "sv_setuv_mg" handles 'set' magic; "sv_setuv" does not.

     void       sv_setuv   (      SV * const sv, const UV num)
     void  Perl_sv_setuv   (pTHX_ SV * const sv, const UV num)
     void       sv_setuv_mg(      SV * const sv, const UV u)
     void  Perl_sv_setuv_mg(pTHX_ SV * const sv, const UV u)

"sv_streq"
"sv_streq_flags"
    These each return a boolean indicating whether the strings in the two SVs are identical.

    "sv_streq_flags" is the more general form, having a "flags" argument that affects its behavior in two ways. It coerces its args to strings if necessary, treating a "NULL" argument as "undef". It correctly handles the UTF8 flag.

    If "flags" has the "SV_GMAGIC" bit set, 'get' magic will be handled.

    If flags does not have the "SV_SKIP_OVERLOAD" bit set, an attempt to use "eq" overloading will be made. If such overloading does not exist or the flag is set, then regular string comparison will be used instead.

    "sv_streq" merely calls "sv_streq_flags" with "flags" set to just "SV_GMAGIC". This function basically behaves like the Perl code "$sv1 eq $sv2".

     bool       sv_streq      (      SV *sv1, SV *sv2)
     bool       sv_streq_flags(      SV *sv1, SV *sv2,
                                     const U32 flags)
     bool  Perl_sv_streq_flags(pTHX_ SV *sv1, SV *sv2,
                                     const U32 flags)

"sv_unmagic"
    Removes all magic of type "type" from an SV.

     int       sv_unmagic(      SV * const sv, const int type)
     int  Perl_sv_unmagic(pTHX_ SV * const sv, const int type)

"sv_unmagicext"
    Removes all magic of type "type" with the specified "vtbl" from an SV.

     int       sv_unmagicext(      SV * const sv, const int type,
                                   const MGVTBL *vtbl)
     int  Perl_sv_unmagicext(pTHX_ SV * const sv, const int type,
                                   const MGVTBL *vtbl)

"sv_unref"
"sv_unref_flags"
    These each unset the RV status of the SV, and decrement the reference count of whatever was being referenced by the RV. This can almost be thought of as a reversal of "newSVrv".

    "sv_unref_flags" has an extra parameter, "flags", which can contain the "SV_IMMEDIATE_UNREF" bit to force the reference count to be decremented no matter what.

    When that bit isn't set, or with plain "sv_unref" always, the reference count will not be immediately decremented if the count is 1. Instead, it will be scheduled to be freed at a time of perl's choosing.

    Other than the ability to force immediate action, the two forms behave identically.

    See "SvROK_off".

     void       sv_unref      (      SV *sv)
     void  Perl_sv_unref      (pTHX_ SV *sv)
     void       sv_unref_flags(      SV * const ref, const U32 flags)
     void  Perl_sv_unref_flags(pTHX_ SV * const ref, const U32 flags)

"sv_upgrade"
    Upgrade an SV to a more complex form. Generally adds a new body type to the SV, then copies across as much information as possible from the old body. It croaks if the SV is already in a more complex form than requested. You generally want to use the "SvUPGRADE" macro wrapper, which checks the type before calling "sv_upgrade", and hence does not croak. See also "svtype".

     void       sv_upgrade(      SV * const sv, svtype new_type)
     void  Perl_sv_upgrade(pTHX_ SV * const sv, svtype new_type)

"sv_usepvn"
"sv_usepvn_flags"
"sv_usepvn_mg"
    These tell an SV to use "ptr" for its string value. Normally SVs have their string stored inside the SV, but these tell the SV to use an external string instead.

    "ptr" should point to memory that was allocated by ""Newx"". It must be the start of a "Newx"-ed block of memory, and not a pointer to the middle of it (beware of "OOK" and copy-on-write), and not be from a non-"Newx" memory allocator like "malloc". The string length, "len", must be supplied. By default this function will ""Renew"" (i.e. realloc, move) the memory pointed to by "ptr", so that the pointer should not be freed or used by the programmer after giving it to "sv_usepvn", and neither should any pointers from "behind" that pointer (e.g., "ptr" + 1) be used.

    In the "sv_usepvn_flags" form, if "flags & SV_SMAGIC" is true, "SvSETMAGIC" is called before returning. And if "flags & SV_HAS_TRAILING_NUL" is true, then "ptr[len]" must be "NUL", and the realloc will be skipped (i.e., the buffer is actually at least 1 byte longer than "len", and already meets the requirements for storing in "SvPVX").

    "sv_usepvn" is merely "sv_usepvn_flags" with "flags" set to 0, so 'set' magic is skipped.

    "sv_usepvn_mg" is merely "sv_usepvn_flags" with "flags" set to "SV_SMAGIC", so 'set' magic is performed.

     void       sv_usepvn      (      SV *sv, char *ptr, STRLEN len)
     void  Perl_sv_usepvn      (pTHX_ SV *sv, char *ptr, STRLEN len)
     void       sv_usepvn_flags(      SV * const sv, char *ptr,
                                      const STRLEN len,
                                      const U32 flags)
     void  Perl_sv_usepvn_flags(pTHX_ SV * const sv, char *ptr,
                                      const STRLEN len,
                                      const U32 flags)
     void       sv_usepvn_mg   (      SV *sv, char *ptr, STRLEN len)
     void  Perl_sv_usepvn_mg   (pTHX_ SV *sv, char *ptr, STRLEN len)

"sv_utf8_decode"
    If the PV of the SV is an octet sequence in Perl's extended UTF-8 and contains a multiple-byte character, the "SvUTF8" flag is turned on so that it looks like a character. If the PV contains only single-byte characters, the "SvUTF8" flag stays off. Scans PV for validity and returns FALSE if the PV is invalid UTF-8.

     bool       sv_utf8_decode(      SV * const sv)
     bool  Perl_sv_utf8_decode(pTHX_ SV * const sv)

"sv_utf8_downgrade"
"sv_utf8_downgrade_flags"
"sv_utf8_downgrade_nomg"
    These attempt to convert the PV of an SV from characters to bytes. If the PV contains a character that cannot fit in a byte, this conversion will fail; in this case, "FALSE" is returned if "fail_ok" is true; otherwise they croak.

    They are not a general purpose Unicode to byte encoding interface: use the "Encode" extension for that.

    They differ only in that:

    "sv_utf8_downgrade" processes 'get' magic on "sv".

    "sv_utf8_downgrade_nomg" does not.

    "sv_utf8_downgrade_flags" has an additional "flags" parameter in which you can specify "SV_GMAGIC" to process 'get' magic, or leave it cleared to not process 'get' magic.

     bool       sv_utf8_downgrade      (      SV * const sv,
                                              const bool fail_ok)
     bool  Perl_sv_utf8_downgrade      (pTHX_ SV * const sv,
                                              const bool fail_ok)
     bool       sv_utf8_downgrade_flags(      SV * const sv,
                                              const bool fail_ok,
                                              const U32 flags)
     bool  Perl_sv_utf8_downgrade_flags(pTHX_ SV * const sv,
                                              const bool fail_ok,
                                              const U32 flags)
     bool       sv_utf8_downgrade_nomg (      SV * const sv,
                                              const bool fail_ok)

"sv_utf8_encode"
    Converts the PV of an SV to UTF-8, but then turns the "SvUTF8" flag off so that it looks like octets again.

     void       sv_utf8_encode(      SV * const sv)
     void  Perl_sv_utf8_encode(pTHX_ SV * const sv)

"sv_utf8_upgrade"
"sv_utf8_upgrade_flags"
"sv_utf8_upgrade_flags_grow"
"sv_utf8_upgrade_nomg"
    These convert the PV of an SV to its UTF-8-encoded form. The SV is forced to string form if it is not already. They always set the "SvUTF8" flag to avoid future validity checks even if the whole string is the same in UTF-8 as not. They return the number of bytes in the converted string

    The forms differ in just two ways. The main difference is whether or not they perform 'get magic' on "sv". "sv_utf8_upgrade_nomg" skips 'get magic'; "sv_utf8_upgrade" performs it; and "sv_utf8_upgrade_flags" and "sv_utf8_upgrade_flags_grow" either perform it (if the "SV_GMAGIC" bit is set in "flags") or don't (if that bit is cleared).

    The other difference is that "sv_utf8_upgrade_flags_grow" has an additional parameter, "extra", which allows the caller to specify an amount of space to be reserved as spare beyond what is needed for the actual conversion. This is used when the caller knows it will soon be needing yet more space, and it is more efficient to request space from the system in a single call. This form is otherwise identical to "sv_utf8_upgrade_flags".

    These are not a general purpose byte encoding to Unicode interface: use the Encode extension for that.

    The "SV_FORCE_UTF8_UPGRADE" flag is now ignored.

     STRLEN       sv_utf8_upgrade           (      SV *sv)
     STRLEN  Perl_sv_utf8_upgrade           (pTHX_ SV *sv)
     STRLEN       sv_utf8_upgrade_flags     (      SV * const sv,
                                                   const I32 flags)
     STRLEN       sv_utf8_upgrade_flags_grow(      SV * const sv,
                                                   const I32 flags,
                                                   STRLEN extra)
     STRLEN  Perl_sv_utf8_upgrade_flags_grow(pTHX_ SV * const sv,
                                                   const I32 flags,
                                                   STRLEN extra)
     STRLEN       sv_utf8_upgrade_nomg      (      SV *sv)

"sv_vcatpvf*"
"sv_vcatpvf_mg*"
"sv_vcatpvfn*"
"sv_vcatpvfn_flags*"
    Described under "sv_catpvf"

"sv_vsetpvf"
"sv_vsetpvf_mg"
    These work like "sv_vcatpvf" but copy the text into the SV instead of appending it.

    They differ only in that "sv_vsetpvf_mg" performs 'set' magic; "sv_vsetpvf" skips all magic.

    They are usually used via their frontends, "sv_setpvf" and "sv_setpvf_mg".

    The UTF-8 flag is not changed by these functions.

     void       sv_vsetpvf   (      SV * const sv,
                                    const char * const pat,
                                    va_list * const args)
     void  Perl_sv_vsetpvf   (pTHX_ SV * const sv,
                                    const char * const pat,
                                    va_list * const args)
     void       sv_vsetpvf_mg(      SV * const sv,
                                    const char * const pat,
                                    va_list * const args)
     void  Perl_sv_vsetpvf_mg(pTHX_ SV * const sv,
                                    const char * const pat,
                                    va_list * const args)

"sv_vsetpvfn"
    Works like "sv_vcatpvfn" but copies the text into the SV instead of appending it.

    The UTF-8 flag is not changed by this function.

    Usually used via one of its frontends ""sv_vsetpvf"" and ""sv_vsetpvf_mg"".

     void       sv_vsetpvfn(      SV * const sv,
                                  const char * const pat,
                                  const STRLEN patlen,
                                  va_list * const args,
                                  SV ** const svargs,
                                  const Size_t sv_count,
                                  bool * const maybe_tainted)
     void  Perl_sv_vsetpvfn(pTHX_ SV * const sv,
                                  const char * const pat,
                                  const STRLEN patlen,
                                  va_list * const args,
                                  SV ** const svargs,
                                  const Size_t sv_count,
                                  bool * const maybe_tainted)

"sv_2cv"
    Using various gambits, try to get a CV from an SV; in addition, try if possible to set *st and *gvp to the stash and GV associated with it. The flags in "lref" are passed to "gv_fetchsv".

     CV *       sv_2cv(      SV *sv, HV ** const st, GV ** const gvp,
                             const I32 lref)
     CV *  Perl_sv_2cv(pTHX_ SV *sv, HV ** const st, GV ** const gvp,
                             const I32 lref)

"sv_2io"
    Using various gambits, try to get an IO from an SV: the IO slot if its a GV; or the recursive result if we're an RV; or the IO slot of the symbol named after the PV if we're a string.

    'Get' magic is ignored on the "sv" passed in, but will be called on SvRV(sv) if "sv" is an RV.

     IO *       sv_2io(      SV * const sv)
     IO *  Perl_sv_2io(pTHX_ SV * const sv)

"sv_2iv_flags"
    Return the integer value of an SV, doing any necessary string conversion. If "flags" has the "SV_GMAGIC" bit set, does an mg_get() first. Normally used via the SvIV(sv) and SvIVx(sv) macros.

     IV       sv_2iv_flags(      SV * const sv, const I32 flags)
     IV  Perl_sv_2iv_flags(pTHX_ SV * const sv, const I32 flags)

"sv_2mortal"
    Marks an existing SV as mortal. The SV will be destroyed "soon", either by an explicit call to "FREETMPS", or by an implicit call at places such as statement boundaries. SvTEMP() is turned on which means that the SV's string buffer can be "stolen" if this SV is copied. See also "sv_newmortal" and "sv_mortalcopy".

     SV *       sv_2mortal(      SV * const sv)
     SV *  Perl_sv_2mortal(pTHX_ SV * const sv)

"sv_2nv_flags"
    Return the num value of an SV, doing any necessary string or integer conversion. If "flags" has the "SV_GMAGIC" bit set, does an mg_get() first. Normally used via the SvNV(sv) and SvNVx(sv) macros.

     NV       sv_2nv_flags(      SV * const sv, const I32 flags)
     NV  Perl_sv_2nv_flags(pTHX_ SV * const sv, const I32 flags)

"sv_2pv"
"sv_2pv_flags"
    These implement the various forms of the ""SvPV"" in perlapi macros. The macros are the preferred interface.

    These return a pointer to the string value of an SV (coercing it to a string if necessary), and set *lp to its length in bytes.

    The forms differ in that plain "sv_2pvbyte" always processes 'get' magic; and "sv_2pvbyte_flags" processes 'get' magic if and only if "flags" contains "SV_GMAGIC".

     char *       sv_2pv      (      SV *sv, STRLEN *lp)
     char *  Perl_sv_2pv      (pTHX_ SV *sv, STRLEN *lp)
     char *       sv_2pv_flags(      SV * const sv, STRLEN * const lp,
                                     const U32 flags)
     char *  Perl_sv_2pv_flags(pTHX_ SV * const sv, STRLEN * const lp,
                                     const U32 flags)

"sv_2pvbyte"
"sv_2pvbyte_flags"
    These implement the various forms of the ""SvPVbyte"" in perlapi macros. The macros are the preferred interface.

    These return a pointer to the byte-encoded representation of the SV, and set *lp to its length. If the SV is marked as being encoded as UTF-8, it will be downgraded, if possible, to a byte string. If the SV cannot be downgraded, they croak.

    The forms differ in that plain "sv_2pvbyte" always processes 'get' magic; and "sv_2pvbyte_flags" processes 'get' magic if and only if "flags" contains "SV_GMAGIC".

     char *       sv_2pvbyte      (      SV *sv, STRLEN * const lp)
     char *  Perl_sv_2pvbyte      (pTHX_ SV *sv, STRLEN * const lp)
     char *       sv_2pvbyte_flags(      SV *sv, STRLEN * const lp,
                                         const U32 flags)
     char *  Perl_sv_2pvbyte_flags(pTHX_ SV *sv, STRLEN * const lp,
                                         const U32 flags)

"sv_2pvutf8"
"sv_2pvutf8_flags"
    These implement the various forms of the ""SvPVutf8"" in perlapi macros. The macros are the preferred interface.

    These return a pointer to the UTF-8-encoded representation of the SV, and set *lp to its length in bytes. They may cause the SV to be upgraded to UTF-8 as a side-effect.

    The forms differ in that plain "sv_2pvutf8" always processes 'get' magic; and "sv_2pvutf8_flags" processes 'get' magic if and only if "flags" contains "SV_GMAGIC".

     char *       sv_2pvutf8      (      SV *sv, STRLEN * const lp)
     char *  Perl_sv_2pvutf8      (pTHX_ SV *sv, STRLEN * const lp)
     char *       sv_2pvutf8_flags(      SV *sv, STRLEN * const lp,
                                         const U32 flags)
     char *  Perl_sv_2pvutf8_flags(pTHX_ SV *sv, STRLEN * const lp,
                                         const U32 flags)

"sv_2uv_flags"
    Return the unsigned integer value of an SV, doing any necessary string conversion. If "flags" has the "SV_GMAGIC" bit set, does an mg_get() first. Normally used via the SvUV(sv) and SvUVx(sv) macros.

     UV       sv_2uv_flags(      SV * const sv, const I32 flags)
     UV  Perl_sv_2uv_flags(pTHX_ SV * const sv, const I32 flags)

"SvAMAGIC"
    Returns a boolean as to whether "sv" has overloading (active magic) enabled or not.

     bool  SvAMAGIC(SV * sv)

"SvAMAGIC_off"
    Indicate that "sv" has overloading (active magic) disabled.

     void       SvAMAGIC_off(SV *sv)
     void  Perl_SvAMAGIC_off(SV *sv)

"SvAMAGIC_on"
    Indicate that "sv" has overloading (active magic) enabled.

     void       SvAMAGIC_on(SV *sv)
     void  Perl_SvAMAGIC_on(SV *sv)

"SvBoolFlagsOK"
    Returns a bool indicating whether the SV has the right flags set such that it is safe to call BOOL_INTERNALS_sv_isbool() or BOOL_INTERNALS_sv_isbool_true() or BOOL_INTERNALS_sv_isbool_false(). Currently equivalent to SvIandPOK(sv) or "SvIOK(sv) && SvPOK(sv)". Serialization may want to unroll this check. If so you are strongly recommended to add code like "assert(SvBoolFlagsOK(sv));" before calling using any of the BOOL_INTERNALS macros.

     U32  SvBoolFlagsOK(SV* sv)

"SvCUR"
    Returns the length, in bytes, of the PV inside the SV. Note that this may not match Perl's "length"; for that, use sv_len_utf8(sv). See "SvLEN" also.

     STRLEN  SvCUR(SV* sv)

"SvCUR_set"
    Sets the current length, in bytes, of the C string which is in the SV. See "SvCUR" and "SvIV_set">.

     void  SvCUR_set(SV* sv, STRLEN len)

"SvEND"
    Returns a pointer to the spot just after the last character in the string which is in the SV, where there is usually a trailing "NUL" character (even though Perl scalars do not strictly require it). See "SvCUR". Access the character as "*(SvEND(sv))".

    Warning: If "SvCUR" is equal to "SvLEN", then "SvEND" points to unallocated memory.

     char*  SvEND(SV* sv)

"SvGAMAGIC"
    Returns true if the SV has get magic or overloading. If either is true then the scalar is active data, and has the potential to return a new value every time it is accessed. Hence you must be careful to only read it once per user logical operation and work with that returned value. If neither is true then the scalar's value cannot change unless written to.

     U32  SvGAMAGIC(SV* sv)

"SvGETMAGIC"
    Invokes "mg_get" on an SV if it has 'get' magic. For example, this will call "FETCH" on a tied variable. As of 5.37.1, this function is guaranteed to evaluate its argument exactly once.

     void       SvGETMAGIC(      SV *sv)
     void  Perl_SvGETMAGIC(pTHX_ SV *sv)

"SvGROW"
    Expands the character buffer in the SV so that it has room for the indicated number of bytes (remember to reserve space for an extra trailing "NUL" character). Calls "sv_grow" to perform the expansion if necessary. Returns a pointer to the character buffer. SV must be of type >= "SVt_PV". One alternative is to call "sv_grow" if you are not sure of the type of SV.

    You might mistakenly think that "len" is the number of bytes to add to the existing size, but instead it is the total size "sv" should be.

     char *  SvGROW(SV* sv, STRLEN len)

"SvIandPOK"
    Returns a bool indicating whether the SV is both SvPOK() and SvIOK() at the same time. Equivalent to "SvIOK(sv) && SvPOK(sv)" but more efficient.

     U32  SvIandPOK(SV* sv)

"SvIandPOK_off"
    Unsets the PV and IV status of an SV in one operation. Equivalent to "SvIOK_off(sv); SvPK_off(v);" but more efficient.

     void  SvIandPOK_off(SV* sv)

"SvIandPOK_on"
    Tells an SV that is a string and a number in one operation. Equivalent to "SvIOK_on(sv); SvPOK_on(sv);" but more efficient.

     void  SvIandPOK_on(SV* sv)

"SvIOK"
    Returns a U32 value indicating whether the SV contains an integer.

     U32  SvIOK(SV* sv)

"SvIOK_notUV"
    Returns a boolean indicating whether the SV contains a signed integer.

     bool  SvIOK_notUV(SV* sv)

"SvIOK_off"
    Unsets the IV status of an SV.

     void  SvIOK_off(SV* sv)

"SvIOK_on"
    Tells an SV that it is an integer.

     void  SvIOK_on(SV* sv)

"SvIOK_only"
    Tells an SV that it is an integer and disables all other "OK" bits.

     void  SvIOK_only(SV* sv)

"SvIOK_only_UV"
    Tells an SV that it is an unsigned integer and disables all other "OK" bits.

     void  SvIOK_only_UV(SV* sv)

"SvIOK_UV"
    Returns a boolean indicating whether the SV contains an integer that must be interpreted as unsigned. A non-negative integer whose value is within the range of both an IV and a UV may be flagged as either "SvUOK" or "SvIOK".

     bool  SvIOK_UV(SV* sv)

"SvIOKp"
    Returns a U32 value indicating whether the SV contains an integer. Checks the private setting. Use "SvIOK" instead.

     U32  SvIOKp(SV* sv)

"SvIsBOOL"
    Returns true if the SV is one of the special boolean constants (PL_sv_yes or PL_sv_no), or is a regular SV whose last assignment stored a copy of one.

     bool  SvIsBOOL(SV* sv)

"SvIsCOW"
    Returns a U32 value indicating whether the SV is Copy-On-Write (either shared hash key scalars, or full Copy On Write scalars if 5.9.0 is configured for COW).

     U32  SvIsCOW(SV* sv)

"SvIsCOW_shared_hash"
    Returns a boolean indicating whether the SV is Copy-On-Write shared hash key scalar.

     bool  SvIsCOW_shared_hash(SV* sv)

"SvIV"
"SvIV_nomg"
"SvIVx"
    These each coerce the given SV to IV and return it. The returned value in many circumstances will get stored in "sv"'s IV slot, but not in all cases. (Use "sv_setiv" to make sure it does).

    As of 5.37.1, all are guaranteed to evaluate "sv" only once.

    "SvIVx" is now identical to "SvIV", but prior to 5.37.1, it was the only form guaranteed to evaluate "sv" only once.

    "SvIV_nomg" is the same as "SvIV", but does not perform 'get' magic.

     IV       SvIV     (      SV *sv)
     IV  Perl_SvIV     (pTHX_ SV *sv)
     IV       SvIV_nomg(      SV *sv)
     IV  Perl_SvIV_nomg(pTHX_ SV *sv)
     IV       SvIVx    (      SV *sv)

"SvIV_set"
    Set the value of the IV pointer in sv to val. It is possible to perform the same function of this macro with an lvalue assignment to "SvIVX". With future Perls, however, it will be more efficient to use "SvIV_set" instead of the lvalue assignment to "SvIVX".

     void  SvIV_set(SV* sv, IV val)

"SvIVX"
    Returns the raw value in the SV's IV slot, without checks or conversions. Only use when you are sure "SvIOK" is true. See also "SvIV".

     IV  SvIVX(SV* sv)

"SvIVx*"
    Described under "SvIV"

"SvLEN"
    Returns the size of the string buffer in the SV, not including any part attributable to "SvOOK". See "SvCUR".

     STRLEN  SvLEN(SV* sv)

"SvLEN_set"
    Set the size of the string buffer for the SV. See "SvLEN".

     void  SvLEN_set(SV* sv, STRLEN len)

"SvLOCK"
    Arranges for a mutual exclusion lock to be obtained on "sv" if a suitable module has been loaded.

     void  SvLOCK(SV* sv)

"SvMAGIC_set"
    Set the value of the MAGIC pointer in "sv" to val. See "SvIV_set".

     void  SvMAGIC_set(SV* sv, MAGIC* val)

"SvNIOK"
    Returns a U32 value indicating whether the SV contains a number, integer or double.

     U32  SvNIOK(SV* sv)

"SvNIOK_off"
    Unsets the NV/IV status of an SV.

     void  SvNIOK_off(SV* sv)

"SvNIOKp"
    Returns a U32 value indicating whether the SV contains a number, integer or double. Checks the private setting. Use "SvNIOK" instead.

     U32  SvNIOKp(SV* sv)

"SvNOK"
    Returns a U32 value indicating whether the SV contains a double.

     U32  SvNOK(SV* sv)

"SvNOK_off"
    Unsets the NV status of an SV.

     void  SvNOK_off(SV* sv)

"SvNOK_on"
    Tells an SV that it is a double.

     void  SvNOK_on(SV* sv)

"SvNOK_only"
    Tells an SV that it is a double and disables all other OK bits.

     void  SvNOK_only(SV* sv)

"SvNOKp"
    Returns a U32 value indicating whether the SV contains a double. Checks the private setting. Use "SvNOK" instead.

     U32  SvNOKp(SV* sv)

"SvNV"
"SvNV_nomg"
"SvNVx"
    These each coerce the given SV to NV and return it. The returned value in many circumstances will get stored in "sv"'s NV slot, but not in all cases. (Use "sv_setnv" to make sure it does).

    As of 5.37.1, all are guaranteed to evaluate "sv" only once.

    "SvNVx" is now identical to "SvNV", but prior to 5.37.1, it was the only form guaranteed to evaluate "sv" only once.

    "SvNV_nomg" is the same as "SvNV", but does not perform 'get' magic.

     NV       SvNV     (      SV *sv)
     NV  Perl_SvNV     (pTHX_ SV *sv)
     NV       SvNV_nomg(      SV *sv)
     NV  Perl_SvNV_nomg(pTHX_ SV *sv)
     NV       SvNVx    (      SV *sv)

"SvNV_set"
    Set the value of the NV pointer in "sv" to val. See "SvIV_set".

     void  SvNV_set(SV* sv, NV val)

"SvNVX"
    Returns the raw value in the SV's NV slot, without checks or conversions. Only use when you are sure "SvNOK" is true. See also "SvNV".

     NV  SvNVX(SV* sv)

"SvNVx*"
    Described under "SvNV"

"SvOK"
    Returns a U32 value indicating whether the value is defined. This is only meaningful for scalars.

     U32  SvOK(SV* sv)

"SvOOK"
    Returns a U32 indicating whether the pointer to the string buffer is offset. This hack is used internally to speed up removal of characters from the beginning of a "SvPV". When "SvOOK" is true, then the start of the allocated string buffer is actually SvOOK_offset() bytes before "SvPVX". This offset used to be stored in "SvIVX", but is now stored within the spare part of the buffer.

     U32  SvOOK(SV* sv)

"SvOOK_off"
    Remove any string offset.

     void  SvOOK_off(SV * sv)

"SvOOK_offset"
    Reads into "len" the offset from "SvPVX" back to the true start of the allocated buffer, which will be non-zero if "sv_chop" has been used to efficiently remove characters from start of the buffer. Implemented as a macro, which takes the address of "len", which must be of type "STRLEN". Evaluates "sv" more than once. Sets "len" to 0 if SvOOK(sv) is false.

     void  SvOOK_offset(SV*sv, STRLEN len)

"SvPOK"
    Returns a U32 value indicating whether the SV contains a character string.

     U32  SvPOK(SV* sv)

"SvPOK_off"
    Unsets the PV status of an SV.

     void  SvPOK_off(SV* sv)

"SvPOK_on"
    Tells an SV that it is a string.

     void  SvPOK_on(SV* sv)

"SvPOK_only"
    Tells an SV that it is a string and disables all other "OK" bits. Will also turn off the UTF-8 status.

     void  SvPOK_only(SV* sv)

"SvPOK_only_UTF8"
    Tells an SV that it is a string and disables all other "OK" bits, and leaves the UTF-8 status as it was.

     void  SvPOK_only_UTF8(SV* sv)

"SvPOKp"
    Returns a U32 value indicating whether the SV contains a character string. Checks the private setting. Use "SvPOK" instead.

     U32  SvPOKp(SV* sv)

"SvPV"
"SvPV_const"
"SvPV_flags"
"SvPV_flags_const"
"SvPV_flags_mutable"
"SvPV_mutable"
"SvPV_nolen"
"SvPV_nolen_const"
"SvPV_nomg"
"SvPV_nomg_const"
"SvPV_nomg_const_nolen"
"SvPV_nomg_nolen"
"SvPVbyte"
"SvPVbyte_nolen"
"SvPVbyte_nomg"
"SvPVbyte_or_null"
"SvPVbyte_or_null_nomg"
"SvPVbytex"
"SvPVbytex_nolen"
"SvPVutf8"
"SvPVutf8_nolen"
"SvPVutf8_nomg"
"SvPVutf8_or_null"
"SvPVutf8_or_null_nomg"
"SvPVutf8x"
"SvPVx"
"SvPVx_const"
"SvPVx_nolen"
"SvPVx_nolen_const"
    These each return a pointer to the string in "sv", or a stringified form of "sv" if it does not contain a string. The SV may cache the stringified version becoming "SvPOK".

    This is a very basic and common operation, so there are lots of slightly different versions of it.

    Note that there is no guarantee that the return value of SvPV(sv), for example, is equal to SvPVX(sv), or that SvPVX(sv) contains valid data, or that successive calls to SvPV(sv) (or another of these forms) will return the same pointer value each time. This is due to the way that things like overloading and Copy-On-Write are handled. In these cases, the return value may point to a temporary buffer or similar. If you absolutely need the "SvPVX" field to be valid (for example, if you intend to write to it), then see "SvPV_force".

    The differences between the forms are:

    The forms with neither "byte" nor "utf8" in their names (e.g., "SvPV" or "SvPV_nolen") can expose the SV's internal string buffer. If that buffer consists entirely of bytes 0-255 and includes any bytes above 127, then you MUST consult "SvUTF8" to determine the actual code points the string is meant to contain. Generally speaking, it is probably safer to prefer "SvPVbyte", "SvPVutf8", and the like. See "How do I pass a Perl string to a C library?" in perlguts for more details.

    The forms with "flags" in their names allow you to use the "flags" parameter to specify to process 'get' magic (by setting the "SV_GMAGIC" flag) or to skip 'get' magic (by clearing it). The other forms process 'get' magic, except for the ones with "nomg" in their names, which skip 'get' magic.

    The forms that take a "len" parameter will set that variable to the byte length of the resultant string (these are macros, so don't use &len).

    The forms with "nolen" in their names indicate they don't have a "len" parameter. They should be used only when it is known that the PV is a C string, terminated by a NUL byte, and without intermediate NUL characters; or when you don't care about its length.

    The forms with "const" in their names return "const char *" so that the compiler will hopefully complain if you were to try to modify the contents of the string (unless you cast away const yourself).

    The other forms return a mutable pointer so that the string is modifiable by the caller; this is emphasized for the ones with "mutable" in their names.

    As of 5.38, all forms are guaranteed to evaluate "sv" exactly once. For earlier Perls, use a form whose name ends with "x" for single evaluation.

    "SvPVutf8" is like "SvPV", but converts "sv" to UTF-8 first if not already UTF-8. Similarly, the other forms with "utf8" in their names correspond to their respective forms without.

    "SvPVutf8_or_null" and "SvPVutf8_or_null_nomg" don't have corresponding non-"utf8" forms. Instead they are like "SvPVutf8_nomg", but when "sv" is undef, they return "NULL".

    "SvPVbyte" is like "SvPV", but converts "sv" to byte representation first if currently encoded as UTF-8. If "sv" cannot be downgraded from UTF-8, it croaks. Similarly, the other forms with "byte" in their names correspond to their respective forms without.

    "SvPVbyte_or_null" doesn't have a corresponding non-"byte" form. Instead it is like "SvPVbyte", but when "sv" is undef, it returns "NULL".

     char*        SvPV                 (SV* sv, STRLEN len)
     const char*  SvPV_const           (SV* sv, STRLEN len)
     char*        SvPV_flags           (SV* sv, STRLEN len, U32 flags)
     const char*  SvPV_flags_const     (SV* sv, STRLEN len, U32 flags)
     char*        SvPV_flags_mutable   (SV* sv, STRLEN len, U32 flags)
     char*        SvPV_mutable         (SV* sv, STRLEN len)
     char*        SvPV_nolen           (SV* sv)
     const char*  SvPV_nolen_const     (SV* sv)
     char*        SvPV_nomg            (SV* sv, STRLEN len)
     const char*  SvPV_nomg_const      (SV* sv, STRLEN len)
     const char*  SvPV_nomg_const_nolen(SV* sv)
     char*        SvPV_nomg_nolen      (SV* sv)
     char*        SvPVbyte             (SV* sv, STRLEN len)
     char*        SvPVbyte_nolen       (SV* sv)
     char*        SvPVbyte_nomg        (SV* sv, STRLEN len)
     char*        SvPVbyte_or_null     (SV* sv, STRLEN len)
     char*        SvPVbyte_or_null_nomg(SV* sv, STRLEN len)
     char*        SvPVbytex            (SV* sv, STRLEN len)
     char*        SvPVbytex_nolen      (SV* sv)
     char*        SvPVutf8             (SV* sv, STRLEN len)
     char*        SvPVutf8_nolen       (SV* sv)
     char*        SvPVutf8_nomg        (SV* sv, STRLEN len)
     char*        SvPVutf8_or_null     (SV* sv, STRLEN len)
     char*        SvPVutf8_or_null_nomg(SV* sv, STRLEN len)
     char*        SvPVutf8x            (SV* sv, STRLEN len)
     char*        SvPVx                (SV* sv, STRLEN len)
     const char*  SvPVx_const          (SV* sv, STRLEN len)
     char*        SvPVx_nolen          (SV* sv)
     const char*  SvPVx_nolen_const    (SV* sv)

"SvPV_force"
"SvPV_force_flags"
"SvPV_force_flags_mutable"
"SvPV_force_flags_nolen"
"SvPV_force_mutable"
"SvPV_force_nolen"
"SvPV_force_nomg"
"SvPV_force_nomg_nolen"
"SvPVbyte_force"
"SvPVbytex_force"
"SvPVutf8_force"
"SvPVutf8x_force"
"SvPVx_force"
    These are like "SvPV", returning the string in the SV, but will force the SV into containing a string ("SvPOK"), and only a string ("SvPOK_only"), by hook or by crook. You need to use one of these "force" routines if you are going to update the "SvPVX" directly.

    Note that coercing an arbitrary scalar into a plain PV will potentially strip useful data from it. For example if the SV was "SvROK", then the referent will have its reference count decremented, and the SV itself may be converted to an "SvPOK" scalar with a string buffer containing a value such as "ARRAY(0x1234)".

    The differences between the forms are:

    The forms with "flags" in their names allow you to use the "flags" parameter to specify to perform 'get' magic (by setting the "SV_GMAGIC" flag) or to skip 'get' magic (by clearing it). The other forms do perform 'get' magic, except for the ones with "nomg" in their names, which skip 'get' magic.

    The forms that take a "len" parameter will set that variable to the byte length of the resultant string (these are macros, so don't use &len).

    The forms with "nolen" in their names indicate they don't have a "len" parameter. They should be used only when it is known that the PV is a C string, terminated by a NUL byte, and without intermediate NUL characters; or when you don't care about its length.

    The forms with "mutable" in their names are effectively the same as those without, but the name emphasizes that the string is modifiable by the caller, which it is in all the forms.

    "SvPVutf8_force" is like "SvPV_force", but converts "sv" to UTF-8 first if not already UTF-8.

    "SvPVutf8x_force" is like "SvPVutf8_force", but guarantees to evaluate "sv" only once; use the more efficient "SvPVutf8_force" otherwise.

    "SvPVbyte_force" is like "SvPV_force", but converts "sv" to byte representation first if currently encoded as UTF-8. If the SV cannot be downgraded from UTF-8, this croaks.

    "SvPVbytex_force" is like "SvPVbyte_force", but guarantees to evaluate "sv" only once; use the more efficient "SvPVbyte_force" otherwise.

     char*  SvPV_force              (SV* sv, STRLEN len)
     char*  SvPV_force_flags        (SV * sv, STRLEN len, U32 flags)
     char*  SvPV_force_flags_mutable(SV * sv, STRLEN len, U32 flags)
     char*  SvPV_force_flags_nolen  (SV * sv, U32 flags)
     char*  SvPV_force_mutable      (SV * sv, STRLEN len)
     char*  SvPV_force_nolen        (SV* sv)
     char*  SvPV_force_nomg         (SV* sv, STRLEN len)
     char*  SvPV_force_nomg_nolen   (SV * sv)
     char*  SvPVbyte_force          (SV * sv, STRLEN len)
     char*  SvPVbytex_force         (SV * sv, STRLEN len)
     char*  SvPVutf8_force          (SV * sv, STRLEN len)
     char*  SvPVutf8x_force         (SV * sv, STRLEN len)
     char*  SvPVx_force             (SV* sv, STRLEN len)

"SvPV_free"
    Frees the PV buffer in "sv", leaving things in a precarious state, so should only be used as part of a larger operation

     void  SvPV_free(SV * sv)

"SvPV_mutable*"
"SvPV_nolen*"
"SvPV_nolen_const*"
"SvPV_nomg*"
"SvPV_nomg_const*"
"SvPV_nomg_const_nolen*"
"SvPV_nomg_nolen*"
    Described under "SvPV"

"SvPV_renew"
    Low level micro optimization of "SvGROW". It is generally better to use "SvGROW" instead. This is because "SvPV_renew" ignores potential issues that "SvGROW" handles. "sv" needs to have a real "PV" that is unencumbered by things like COW. Using "SV_CHECK_THINKFIRST" or "SV_CHECK_THINKFIRST_COW_DROP" before calling this should clean it up, but why not just use "SvGROW" if you're not sure about the provenance?

     void  SvPV_renew(SV* sv, STRLEN len)

"SvPV_set"
    This is probably not what you want to use, you probably wanted "sv_usepvn_flags" or "sv_setpvn" or "sv_setpvs".

    Set the value of the PV pointer in "sv" to the Perl allocated "NUL"-terminated string "val". See also "SvIV_set".

    Remember to free the previous PV buffer. There are many things to check. Beware that the existing pointer may be involved in copy-on-write or other mischief, so do SvOOK_off(sv) and use "sv_force_normal" or "SvPV_force" (or check the "SvIsCOW" flag) first to make sure this modification is safe. Then finally, if it is not a COW, call "SvPV_free" to free the previous PV buffer.

     void  SvPV_set(SV* sv, char* val)

"SvPV_shrink_to_cur"
    Trim any trailing unused memory in the PV of "sv", which needs to have a real "PV" that is unencumbered by things like COW. Think first before using this functionality. Is the space saving really worth giving up COW? Will the needed size of "sv" stay the same?

    If the answers are both yes, then use ""SV_CHECK_THINKFIRST"" or ""SV_CHECK_THINKFIRST_COW_DROP"" before calling this.

     void  SvPV_shrink_to_cur(SV* sv)

"SvPVbyte*"
    Described under "SvPV"

"SvPVbyte_force*"
    Described under "SvPV_force"

"SvPVbyte_nolen*"
"SvPVbyte_nomg*"
"SvPVbyte_or_null*"
"SvPVbyte_or_null_nomg*"
"SvPVbytex*"
    Described under "SvPV"

"SvPVbytex_force*"
    Described under "SvPV_force"

"SvPVbytex_nolen*"
    Described under "SvPV"

"SvPVCLEAR"
    Ensures that sv is a SVt_PV and that its SvCUR is 0, and that it is properly null terminated. Equivalent to sv_setpvs(""), but more efficient.

     char *  SvPVCLEAR(SV* sv)

"SvPVCLEAR_FRESH"
    Like SvPVCLEAR, but optimized for newly-minted SVt_PV/PVIV/PVNV/PVMG that already have a PV buffer allocated, but no SvTHINKFIRST.

     char *  SvPVCLEAR_FRESH(SV* sv)

"SvPVutf8*"
    Described under "SvPV"

"SvPVutf8_force*"
    Described under "SvPV_force"

"SvPVutf8_nolen*"
"SvPVutf8_nomg*"
"SvPVutf8_or_null*"
"SvPVutf8_or_null_nomg*"
"SvPVutf8x*"
    Described under "SvPV"

"SvPVutf8x_force*"
    Described under "SvPV_force"

"SvPVX"
"SvPVX_const"
"SvPVX_mutable"
"SvPVXx"
    These return a pointer to the physical string in the SV. The SV must contain a string. Prior to 5.9.3 it is not safe to execute these unless the SV's type >= "SVt_PV".

    These are also used to store the name of an autoloaded subroutine in an XS AUTOLOAD routine. See "Autoloading with XSUBs" in perlguts.

    "SvPVXx" is identical to "SvPVX".

    "SvPVX_mutable" is merely a synonym for "SvPVX", but its name emphasizes that the string is modifiable by the caller.

    "SvPVX_const" differs in that the return value has been cast so that the compiler will complain if you were to try to modify the contents of the string, (unless you cast away const yourself).

     char*        SvPVX        (SV* sv)
     const char*  SvPVX_const  (SV* sv)
     char*        SvPVX_mutable(SV* sv)
     char*        SvPVXx       (SV* sv)

"SvPVx*"
"SvPVx_const*"
    Described under "SvPV"

"SvPVx_force*"
    Described under "SvPV_force"

"SvPVx_nolen*"
"SvPVx_nolen_const*"
    Described under "SvPV"

"SvPVXtrue"
    Returns a boolean as to whether or not "sv" contains a PV that is considered TRUE. FALSE is returned if "sv" doesn't contain a PV, or if the PV it does contain is zero length, or consists of just the single character '0'. Every other PV value is considered TRUE.

    As of Perl v5.37.1, "sv" is evaluated exactly once; in earlier releases, it could be evaluated more than once.

     bool       SvPVXtrue(      SV *sv)
     bool  Perl_SvPVXtrue(pTHX_ SV *sv)

"SvPVXx*"
    Described under "SvPVX"

"SvREADONLY"
    Returns true if the argument is readonly, otherwise returns false. Exposed to perl code via Internals::SvREADONLY().

     U32  SvREADONLY(SV* sv)

"SvREADONLY_off"
    Mark an object as not-readonly. Exactly what this mean depends on the object type. Exposed to perl code via Internals::SvREADONLY().

     U32  SvREADONLY_off(SV* sv)

"SvREADONLY_on"
    Mark an object as readonly. Exactly what this means depends on the object type. Exposed to perl code via Internals::SvREADONLY().

     U32  SvREADONLY_on(SV* sv)

"SvREFCNT"
    Returns the value of the object's reference count. Exposed to perl code via Internals::SvREFCNT().

     U32  SvREFCNT(SV* sv)

"SvREFCNT_dec"
"SvREFCNT_dec_set_NULL"
"SvREFCNT_dec_ret_NULL"
"SvREFCNT_dec_NN"
    These decrement the reference count of the given SV.

    "SvREFCNT_dec_NN" may only be used when "sv" is known to not be "NULL".

    The function SvREFCNT_dec_ret_NULL() is identical to the SvREFCNT_dec() except it returns a NULL "SV *". It is used by SvREFCNT_dec_set_NULL() which is a macro which will, when passed a non-NULL argument, decrement the reference count of its argument and then set it to NULL. You can replace code of the following form:

        if (sv) {
           SvREFCNT_dec_NN(sv);
           sv = NULL;
        }

    with

        SvREFCNT_dec_set_NULL(sv);

     void       SvREFCNT_dec         (      SV *sv)
     void  Perl_SvREFCNT_dec         (pTHX_ SV *sv)
     void       SvREFCNT_dec_set_NULL(      SV *sv)
     SV *       SvREFCNT_dec_ret_NULL(      SV *sv)
     SV *  Perl_SvREFCNT_dec_ret_NULL(pTHX_ SV *sv)
     void       SvREFCNT_dec_NN      (      SV *sv)
     void  Perl_SvREFCNT_dec_NN      (pTHX_ SV *sv)

"SvREFCNT_inc"
"SvREFCNT_inc_NN"
"SvREFCNT_inc_simple"
"SvREFCNT_inc_simple_NN"
"SvREFCNT_inc_simple_void"
"SvREFCNT_inc_simple_void_NN"
"SvREFCNT_inc_void"
"SvREFCNT_inc_void_NN"
    These all increment the reference count of the given SV. The ones without "void" in their names return the SV.

    "SvREFCNT_inc" is the base operation; the rest are optimizations if various input constraints are known to be true; hence, all can be replaced with "SvREFCNT_inc".

    "SvREFCNT_inc_NN" can only be used if you know "sv" is not "NULL". Since we don't have to check the NULLness, it's faster and smaller.

    "SvREFCNT_inc_void" can only be used if you don't need the return value. The macro doesn't need to return a meaningful value.

    "SvREFCNT_inc_void_NN" can only be used if you both don't need the return value, and you know that "sv" is not "NULL". The macro doesn't need to return a meaningful value, or check for NULLness, so it's smaller and faster.

    "SvREFCNT_inc_simple" can only be used with expressions without side effects. Since we don't have to store a temporary value, it's faster.

    "SvREFCNT_inc_simple_NN" can only be used with expressions without side effects and you know "sv" is not "NULL". Since we don't have to store a temporary value, nor check for NULLness, it's faster and smaller.

    "SvREFCNT_inc_simple_void" can only be used with expressions without side effects and you don't need the return value.

    "SvREFCNT_inc_simple_void_NN" can only be used with expressions without side effects, you don't need the return value, and you know "sv" is not "NULL".

     SV *       SvREFCNT_inc               (SV *sv)
     SV *  Perl_SvREFCNT_inc               (SV *sv)
     SV *       SvREFCNT_inc_NN            (SV *sv)
     SV *  Perl_SvREFCNT_inc_NN            (SV *sv)
     SV *       SvREFCNT_inc_simple        (SV *sv)
     SV *       SvREFCNT_inc_simple_NN     (SV *sv)
     void       SvREFCNT_inc_simple_void   (SV *sv)
     void       SvREFCNT_inc_simple_void_NN(SV *sv)
     void       SvREFCNT_inc_void          (SV *sv)
     void  Perl_SvREFCNT_inc_void          (SV *sv)
     void       SvREFCNT_inc_void_NN       (SV *sv)

"SvROK"
    Tests if the SV is an RV.

     U32  SvROK(SV* sv)

"SvROK_off"
    Unsets the RV status of an SV.

     void  SvROK_off(SV* sv)

"SvROK_on"
    Tells an SV that it is an RV.

     void  SvROK_on(SV* sv)

"SvRV"
    Dereferences an RV to return the SV.

     SV*  SvRV(SV* sv)

"SvRV_set"
    Set the value of the RV pointer in "sv" to val. See "SvIV_set".

     void  SvRV_set(SV* sv, SV* val)

"SvSETMAGIC"
    Invokes "mg_set" on an SV if it has 'set' magic. This is necessary after modifying a scalar, in case it is a magical variable like $| or a tied variable (it calls "STORE"). This macro evaluates its argument more than once.

     void  SvSETMAGIC(SV* sv)

"SvSetMagicSV"
"SvSetMagicSV_nosteal"
"SvSetSV"
"SvSetSV_nosteal"
    if "dsv" is the same as "ssv", these do nothing. Otherwise they all call some form of "sv_setsv". They may evaluate their arguments more than once.

    The only differences are:

    "SvSetMagicSV" and "SvSetMagicSV_nosteal" perform any required 'set' magic afterwards on the destination SV; "SvSetSV" and "SvSetSV_nosteal" do not.

    "SvSetSV_nosteal" "SvSetMagicSV_nosteal" call a non-destructive version of "sv_setsv".

     void  SvSetMagicSV        (SV* dsv, SV* ssv)
     void  SvSetMagicSV_nosteal(SV* dsv, SV* ssv)
     void  SvSetSV             (SV* dsv, SV* ssv)
     void  SvSetSV_nosteal     (SV* dsv, SV* ssv)

"SvSHARE"
    Arranges for "sv" to be shared between threads if a suitable module has been loaded.

     void  SvSHARE(SV* sv)

"SvSHARED_HASH"
    Returns the hash for "sv" created by "newSVpvn_share".

     struct hek*  SvSHARED_HASH(SV * sv)

"SvSTASH"
    Returns the stash of the SV.

     HV*  SvSTASH(SV* sv)

"SvSTASH_set"
    Set the value of the STASH pointer in "sv" to val. See "SvIV_set".

     void  SvSTASH_set(SV* sv, HV* val)

"SvTRUE"
"SvTRUE_NN"
"SvTRUE_nomg"
"SvTRUE_nomg_NN"
"SvTRUEx"
    These return a boolean indicating whether Perl would evaluate the SV as true or false. See "SvOK" for a defined/undefined test.

    As of Perl 5.32, all are guaranteed to evaluate "sv" only once. Prior to that release, only "SvTRUEx" guaranteed single evaluation; now "SvTRUEx" is identical to "SvTRUE".

    "SvTRUE_nomg" and "TRUE_nomg_NN" do not perform 'get' magic; the others do unless the scalar is already "SvPOK", "SvIOK", or "SvNOK" (the public, not the private flags).

    "SvTRUE_NN" is like "SvTRUE", but "sv" is assumed to be non-null (NN). If there is a possibility that it is NULL, use plain "SvTRUE".

    "SvTRUE_nomg_NN" is like "SvTRUE_nomg", but "sv" is assumed to be non-null (NN). If there is a possibility that it is NULL, use plain "SvTRUE_nomg".

     bool       SvTRUE        (      SV *sv)
     bool  Perl_SvTRUE        (pTHX_ SV *sv)
     bool       SvTRUE_NN     (      SV *sv)
     bool  Perl_SvTRUE_NN     (pTHX_ SV *sv)
     bool       SvTRUE_nomg   (      SV *sv)
     bool  Perl_SvTRUE_nomg   (pTHX_ SV *sv)
     bool       SvTRUE_nomg_NN(      SV *sv)
     bool       SvTRUEx       (      SV *sv)

"SvTYPE"
    Returns the type of the SV. See "svtype".

     svtype  SvTYPE(SV* sv)

"SvUNLOCK"
    Releases a mutual exclusion lock on "sv" if a suitable module has been loaded.

     void  SvUNLOCK(SV* sv)

"SvUOK"
    Returns a boolean indicating whether the SV contains an integer that must be interpreted as unsigned. A non-negative integer whose value is within the range of both an IV and a UV may be flagged as either "SvUOK" or "SvIOK".

     bool  SvUOK(SV* sv)

"SvUPGRADE"
    Used to upgrade an SV to a more complex form. Uses "sv_upgrade" to perform the upgrade if necessary. See "svtype".

     void  SvUPGRADE(SV* sv, svtype type)

"SvUTF8"
    Returns a U32 value indicating the UTF-8 status of an SV. If things are set-up properly, this indicates whether or not the SV contains UTF-8 encoded data. You should use this after a call to "SvPV" or one of its variants, in case any call to string overloading updates the internal flag.

    If you want to take into account the bytes pragma, use "DO_UTF8" instead.

     U32  SvUTF8(SV* sv)

"SvUTF8_off"
    Unsets the UTF-8 status of an SV (the data is not changed, just the flag). Do not use frivolously.

     void  SvUTF8_off(SV *sv)

"SvUTF8_on"
    Turn on the UTF-8 status of an SV (the data is not changed, just the flag). Do not use frivolously.

     void  SvUTF8_on(SV *sv)

"SvUV"
"SvUV_nomg"
"SvUVx"
    These each coerce the given SV to UV and return it. The returned value in many circumstances will get stored in "sv"'s UV slot, but not in all cases. (Use "sv_setuv" to make sure it does).

    As of 5.37.1, all are guaranteed to evaluate "sv" only once.

    "SvUVx" is now identical to "SvUV", but prior to 5.37.1, it was the only form guaranteed to evaluate "sv" only once.

     UV       SvUV     (      SV *sv)
     UV  Perl_SvUV     (pTHX_ SV *sv)
     UV       SvUV_nomg(      SV *sv)
     UV  Perl_SvUV_nomg(pTHX_ SV *sv)
     UV       SvUVx    (      SV *sv)

"SvUV_set"
    Set the value of the UV pointer in "sv" to val. See "SvIV_set".

     void  SvUV_set(SV* sv, UV val)

"SvUVX"
    Returns the raw value in the SV's UV slot, without checks or conversions. Only use when you are sure "SvIOK" is true. See also "SvUV".

     UV  SvUVX(SV* sv)

"SvUVx*"
    Described under "SvUV"

"SvUVXx"
    "DEPRECATED!" It is planned to remove "SvUVXx" from a future release of Perl. Do not use it for new code; remove it from existing code.

    This is an unnecessary synonym for "SvUVX"

     UV  SvUVXx(SV* sv)

"SvVOK"
    Returns a boolean indicating whether the SV contains a v-string.

     bool  SvVOK(SV* sv)

"SvVSTRING_mg"
    Returns the vstring magic, or NULL if none

     MAGIC*  SvVSTRING_mg(SV * sv)

"uiv_2buf"
    This function converts an IV or UV to its string representation.

    It is used internally by sv_2pv_flags() and do_print().

     char *       uiv_2buf(char * const buf, const IV iv, UV uv,
                           const int is_uv, char ** const peob)
     char *  Perl_uiv_2buf(char * const buf, const IV iv, UV uv,
                           const int is_uv, char ** const peob)

"vnewSVpvf"
    Like "newSVpvf" but the arguments are an encapsulated argument list.

     SV *       vnewSVpvf(      const char * const pat,
                                va_list * const args)
     SV *  Perl_vnewSVpvf(pTHX_ const char * const pat,
                                va_list * const args)

Tainting

"SvTAINT"
    Taints an SV if tainting is enabled, and if some input to the current expression is tainted--usually a variable, but possibly also implicit inputs such as locale settings. "SvTAINT" propagates that taintedness to the outputs of an expression in a pessimistic fashion; i.e., without paying attention to precisely which outputs are influenced by which inputs.

     void  SvTAINT(SV* sv)

"SvTAINTED"
    Checks to see if an SV is tainted. Returns TRUE if it is, FALSE if not.

     bool  SvTAINTED(SV* sv)

"SvTAINTED_off"
    Untaints an SV. Be very careful with this routine, as it short-circuits some of Perl's fundamental security features. XS module authors should not use this function unless they fully understand all the implications of unconditionally untainting the value. Untainting should be done in the standard perl fashion, via a carefully crafted regexp, rather than directly untainting variables.

     void  SvTAINTED_off(SV* sv)

"SvTAINTED_on"
    Marks an SV as tainted if tainting is enabled.

     void  SvTAINTED_on(SV* sv)

Time

"ASCTIME_R_PROTO"
    This symbol encodes the prototype of "asctime_r". It is zero if "d_asctime_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_asctime_r" is defined.

"CTIME_R_PROTO"
    This symbol encodes the prototype of "ctime_r". It is zero if "d_ctime_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_ctime_r" is defined.

"GMTIME_MAX"
    This symbol contains the maximum value for the "time_t" offset that the system function gmtime () accepts, and defaults to 0

"GMTIME_MIN"
    This symbol contains the minimum value for the "time_t" offset that the system function gmtime () accepts, and defaults to 0

"GMTIME_R_PROTO"
    This symbol encodes the prototype of "gmtime_r". It is zero if "d_gmtime_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_gmtime_r" is defined.

"HAS_ASCTIME_R"
    This symbol, if defined, indicates that the "asctime_r" routine is available to asctime re-entrantly.

"HAS_ASCTIME64"
    This symbol, if defined, indicates that the "asctime64" () routine is available to do the 64bit variant of asctime ()

"HAS_CTIME_R"
    This symbol, if defined, indicates that the "ctime_r" routine is available to ctime re-entrantly.

"HAS_CTIME64"
    This symbol, if defined, indicates that the "ctime64" () routine is available to do the 64bit variant of ctime ()

"HAS_DIFFTIME"
    This symbol, if defined, indicates that the "difftime" routine is available.

"HAS_DIFFTIME64"
    This symbol, if defined, indicates that the "difftime64" () routine is available to do the 64bit variant of difftime ()

"HAS_FUTIMES"
    This symbol, if defined, indicates that the "futimes" routine is available to change file descriptor time stamps with "struct timevals".

"HAS_GETITIMER"
    This symbol, if defined, indicates that the "getitimer" routine is available to return interval timers.

"HAS_GETTIMEOFDAY"
    This symbol, if defined, indicates that the gettimeofday() system call is available for a sub-second accuracy clock. Usually, the file sys/resource.h needs to be included (see "I_SYS_RESOURCE"). The type "Timeval" should be used to refer to ""struct timeval"".

"HAS_GMTIME_R"
    This symbol, if defined, indicates that the "gmtime_r" routine is available to gmtime re-entrantly.

"HAS_GMTIME64"
    This symbol, if defined, indicates that the "gmtime64" () routine is available to do the 64bit variant of gmtime ()

"HAS_LOCALTIME_R"
    This symbol, if defined, indicates that the "localtime_r" routine is available to localtime re-entrantly.

"HAS_LOCALTIME64"
    This symbol, if defined, indicates that the "localtime64" () routine is available to do the 64bit variant of localtime ()

"HAS_MKTIME"
    This symbol, if defined, indicates that the "mktime" routine is available.

"HAS_MKTIME64"
    This symbol, if defined, indicates that the "mktime64" () routine is available to do the 64bit variant of mktime ()

"HAS_NANOSLEEP"
    This symbol, if defined, indicates that the "nanosleep" system call is available to sleep with 1E-9 sec accuracy.

"HAS_SETITIMER"
    This symbol, if defined, indicates that the "setitimer" routine is available to set interval timers.

"HAS_STRFTIME"
    This symbol, if defined, indicates that the "strftime" routine is available to do time formatting.

"HAS_TIME"
    This symbol, if defined, indicates that the time() routine exists.

"HAS_TIMEGM"
    This symbol, if defined, indicates that the "timegm" routine is available to do the opposite of gmtime ()

"HAS_TIMES"
    This symbol, if defined, indicates that the times() routine exists. Note that this became obsolete on some systems ("SUNOS"), which now use getrusage(). It may be necessary to include sys/times.h.

"HAS_TM_TM_GMTOFF"
    This symbol, if defined, indicates to the C program that the "struct tm" has a "tm_gmtoff" field.

"HAS_TM_TM_ZONE"
    This symbol, if defined, indicates to the C program that the "struct tm" has a "tm_zone" field.

"HAS_TZNAME"
    This symbol, if defined, indicates that the "tzname[]" array is available to access timezone names.

"HAS_USLEEP"
    This symbol, if defined, indicates that the "usleep" routine is available to let the process sleep on a sub-second accuracy.

"HAS_USLEEP_PROTO"
    This symbol, if defined, indicates that the system provides a prototype for the usleep() function. Otherwise, it is up to the program to supply one. A good guess is

     extern int usleep(useconds_t);

"I_TIME"
    This symbol is always defined, and indicates to the C program that it should include time.h.

     #ifdef I_TIME
         #include <time.h>
     #endif

"I_UTIME"
    This symbol, if defined, indicates to the C program that it should include utime.h.

     #ifdef I_UTIME
         #include <utime.h>
     #endif

"L_R_TZSET"
    If localtime_r() needs tzset, it is defined in this define

"LOCALTIME_MAX"
    This symbol contains the maximum value for the "time_t" offset that the system function localtime () accepts, and defaults to 0

"LOCALTIME_MIN"
    This symbol contains the minimum value for the "time_t" offset that the system function localtime () accepts, and defaults to 0

"LOCALTIME_R_NEEDS_TZSET"
    Many libc's "localtime_r" implementations do not call tzset, making them differ from localtime(), and making timezone changes using $"ENV"{TZ} without explicitly calling tzset impossible. This symbol makes us call tzset before "localtime_r"

"LOCALTIME_R_PROTO"
    This symbol encodes the prototype of "localtime_r". It is zero if "d_localtime_r" is undef, and one of the "REENTRANT_PROTO_T_ABC" macros of reentr.h if "d_localtime_r" is defined.

"mini_mktime"
    normalise "struct tm" values without the localtime() semantics (and overhead) of mktime().

     void       mini_mktime(struct tm *ptm)
     void  Perl_mini_mktime(struct tm *ptm)

"sv_strftime_tm"
"sv_strftime_ints"
"my_strftime"
    These implement the libc strftime().

    On failure, they return NULL, and set "errno" to "EINVAL".

    "sv_strftime_tm" and "sv_strftime_ints" are preferred, as they transparently handle the UTF-8ness of the current locale, the input "fmt", and the returned result. Only if the current "LC_TIME" locale is a UTF-8 one (and "use bytes" is not in effect) will the result be marked as UTF-8.

    "my_strftime" is kept for backwards compatibility. Knowing if its result should be considered UTF-8 or not requires significant extra logic.

    Note that all three functions are always executed in the underlying "LC_TIME" locale of the program, giving results based on that locale.

    The functions differ as follows:

    "sv_strftime_tm" takes a pointer to a filled-in "struct tm" parameter. It ignores the values of the "wday" and "yday" fields in it. The other fields give enough information to accurately calculate these values, and are used for that purpose.

    The caller assumes ownership of the returned SV with a reference count of 1.

    "sv_strftime_ints" takes a bunch of integer parameters that together completely define a given time. It calculates the "struct tm" to pass to libc strftime(), and calls that function.

    The value of "isdst" is used as follows:

    0   No daylight savings time is in effect

    >0  Check if daylight savings time is in effect, and adjust the results accordingly.

    <0  This value is reserved for internal use by the POSIX module for backwards compatibility purposes.

    The caller assumes ownership of the returned SV with a reference count of 1.

    "my_strftime" is like "sv_strftime_ints" except that:

    The "fmt" parameter and the return are "char *" instead of "SV *".
        This means the UTF-8ness of the result is unspecified. The result MUST be arranged to be FREED BY THE CALLER).

    The "is_dst" parameter is ignored.
        Daylight savings time is never considered to be in effect.

    It has extra parameters "yday" and "wday" that are ignored.
        These exist only for historical reasons; the values for the corresponding fields in "struct tm" are calculated from the other arguments.

    Note that all three functions are always executed in the underlying "LC_TIME" locale of the program, giving results based on that locale.

     SV *         sv_strftime_tm  (      SV *fmt,
                                         const struct tm *mytm)
     SV *    Perl_sv_strftime_tm  (pTHX_ SV *fmt,
                                         const struct tm *mytm)
     SV *         sv_strftime_ints(      SV *fmt, int sec, int min,
                                         int hour, int mday, int mon,
                                         int year, int isdst)
     SV *    Perl_sv_strftime_ints(pTHX_ SV *fmt, int sec, int min,
                                         int hour, int mday, int mon,
                                         int year, int isdst)
     char *       my_strftime     (      const char *fmt, int sec,
                                         int min, int hour, int mday,
                                         int mon, int year, int wday,
                                         int yday, int isdst)
     char *  Perl_my_strftime     (pTHX_ const char *fmt, int sec,
                                         int min, int hour, int mday,
                                         int mon, int year, int wday,
                                         int yday, int isdst)

Typedef names

"DB_Hash_t"
    This symbol contains the type of the prefix structure element in the db.h header file. In older versions of DB, it was int, while in newer ones it is "size_t".

"DB_Prefix_t"
    This symbol contains the type of the prefix structure element in the db.h header file. In older versions of DB, it was int, while in newer ones it is "u_int32_t".

"Direntry_t"
    This symbol is set to '"struct direct"' or '"struct dirent"' depending on whether dirent is available or not. You should use this pseudo type to portably declare your directory entries.

"Fpos_t"
    This symbol holds the type used to declare file positions in libc. It can be "fpos_t", long, uint, etc... It may be necessary to include sys/types.h to get any typedef'ed information.

"Free_t"
    This variable contains the return type of free(). It is usually void, but occasionally int.

"Gid_t"
    This symbol holds the return type of getgid() and the type of argument to setrgid() and related functions. Typically, it is the type of group ids in the kernel. It can be int, ushort, "gid_t", etc... It may be necessary to include sys/types.h to get any typedef'ed information.

"Gid_t_f"
    This symbol defines the format string used for printing a "Gid_t".

"Gid_t_sign"
    This symbol holds the signedness of a "Gid_t". 1 for unsigned, -1 for signed.

"Gid_t_size"
    This symbol holds the size of a "Gid_t" in bytes.

"Groups_t"
    This symbol holds the type used for the second argument to getgroups() and setgroups(). Usually, this is the same as gidtype ("gid_t") , but sometimes it isn't. It can be int, ushort, "gid_t", etc... It may be necessary to include sys/types.h to get any typedef'ed information. This is only required if you have getgroups() or setgroups()..

"Malloc_t"
    This symbol is the type of pointer returned by malloc and realloc.

"Mmap_t"
    This symbol holds the return type of the mmap() system call (and simultaneously the type of the first argument). Usually set to 'void *' or '"caddr_t"'.

"Mode_t"
    This symbol holds the type used to declare file modes for systems calls. It is usually "mode_t", but may be int or unsigned short. It may be necessary to include sys/types.h to get any typedef'ed information.

"Netdb_hlen_t"
    This symbol holds the type used for the 2nd argument to gethostbyaddr().

"Netdb_host_t"
    This symbol holds the type used for the 1st argument to gethostbyaddr().

"Netdb_name_t"
    This symbol holds the type used for the argument to gethostbyname().

"Netdb_net_t"
    This symbol holds the type used for the 1st argument to getnetbyaddr().

"Off_t"
    This symbol holds the type used to declare offsets in the kernel. It can be int, long, "off_t", etc... It may be necessary to include sys/types.h to get any typedef'ed information.

"Off_t_size"
    This symbol holds the number of bytes used by the "Off_t".

"Pid_t"
    This symbol holds the type used to declare process ids in the kernel. It can be int, uint, "pid_t", etc... It may be necessary to include sys/types.h to get any typedef'ed information.

"Rand_seed_t"
    This symbol defines the type of the argument of the random seed function.

"Select_fd_set_t"
    This symbol holds the type used for the 2nd, 3rd, and 4th arguments to select. Usually, this is '"fd_set" *', if "HAS_FD_SET" is defined, and 'int *' otherwise. This is only useful if you have select(), of course.

"Shmat_t"
    This symbol holds the return type of the shmat() system call. Usually set to 'void *' or 'char *'.

"Signal_t"
    This symbol's value is either "void" or "int", corresponding to the appropriate return type of a signal handler. Thus, you can declare a signal handler using ""Signal_t" (*handler)()", and define the handler using ""Signal_t" handler(sig)".

"Size_t"
    This symbol holds the type used to declare length parameters for string functions. It is usually "size_t", but may be unsigned long, int, etc. It may be necessary to include sys/types.h to get any typedef'ed information.

"Size_t_size"
    This symbol holds the size of a "Size_t" in bytes.

"Sock_size_t"
    This symbol holds the type used for the size argument of various socket calls (just the base type, not the pointer-to).

"SSize_t"
    This symbol holds the type used by functions that return a count of bytes or an error condition. It must be a signed type. It is usually "ssize_t", but may be long or int, etc. It may be necessary to include sys/types.h or unistd.h to get any typedef'ed information. We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).

"Time_t"
    This symbol holds the type returned by time(). It can be long, or "time_t" on "BSD" sites (in which case sys/types.h should be included).

"Uid_t"
    This symbol holds the type used to declare user ids in the kernel. It can be int, ushort, "uid_t", etc... It may be necessary to include sys/types.h to get any typedef'ed information.

"Uid_t_f"
    This symbol defines the format string used for printing a "Uid_t".

"Uid_t_sign"
    This symbol holds the signedness of a "Uid_t". 1 for unsigned, -1 for signed.

"Uid_t_size"
    This symbol holds the size of a "Uid_t" in bytes.

Unicode Support
"Unicode Support" in perlguts has an introduction to this API.

See also "Character classification", "Character case changing", and "String Handling". Various functions outside this section also work specially with Unicode. Search for the string "utf8" in this document.

"BOM_UTF8"
    This is a macro that evaluates to a string constant of the UTF-8 bytes that define the Unicode BYTE ORDER MARK (U+FEFF) for the platform that perl is compiled on. This allows code to use a mnemonic for this character that works on both ASCII and EBCDIC platforms. "sizeof(BOM_UTF8) - 1" can be used to get its length in bytes.

"bytes_cmp_utf8"
    Compares the sequence of characters (stored as octets) in "b", "blen" with the sequence of characters (stored as UTF-8) in "u", "ulen". Returns 0 if they are equal, -1 or -2 if the first string is less than the second string, +1 or +2 if the first string is greater than the second string.

    -1 or +1 is returned if the shorter string was identical to the start of the longer string. -2 or +2 is returned if there was a difference between characters within the strings.

     int       bytes_cmp_utf8(      const U8 *b, STRLEN blen,
                                    const U8 *u, STRLEN ulen)
     int  Perl_bytes_cmp_utf8(pTHX_ const U8 *b, STRLEN blen,
                                    const U8 *u, STRLEN ulen)

"bytes_from_utf8*"
    Described under "utf8_to_bytes_overwrite"

"bytes_to_utf8"
"bytes_to_utf8_free_me"
"bytes_to_utf8_temp_pv"
    These each convert a string "s" of length *lenp bytes from the native encoding into UTF-8 (UTF-EBCDIC on EBCDIC platforms), returning a pointer to the UTF-8 string, and setting *lenp to its length in bytes.

    "bytes_to_utf8" always allocates new memory for the result, making sure it is NUL-terminated.

    "bytes_to_utf8_free_me" simply returns a pointer to the input string if the string's UTF-8 representation is the same as its native representation. Otherwise, it behaves like "bytes_to_utf8", returning a pointer to new memory containing the conversion of the input. In other words, it returns the input string if converting the string would be a no-op. Note that when no new string is allocated, the function can't add a NUL to the original string if one wasn't already there.

    In both cases, the caller is responsible for arranging for any new memory to get freed.

    "bytes_to_utf8_temp_pv" simply returns a pointer to the input string if the string's UTF-8 representation is the same as its native representation, thus behaving like "bytes_to_utf8_free_me" in this situation. Otherwise, it behaves like "bytes_to_utf8", returning a pointer to new memory containing the conversion of the input. The difference is that it also arranges for the new memory to automatically be freed by calling "SAVEFREEPV" on it.

    "bytes_to_utf8_free_me" takes an extra parameter, "free_me" to communicate. to the caller that memory was allocated or not. If that parameter is NULL, "bytes_to_utf8_free_me" acts identically to "bytes_to_utf8", always allocating new memory.

    But when it is a non-NULL pointer, "bytes_to_utf8_free_me" stores into it either NULL if no memory was allocated; or a pointer to that new memory. This allows the following convenient paradigm:

     void * free_me;
     U8 converted = bytes_to_utf8_free_me(string, &len, &free_me);

     ...

     Safefree(free_me);

    You don't have to know if memory was allocated or not. Just call "Safefree" unconditionally. "free_me" will contain a suitable value to pass to "Safefree" for it to do the right thing, regardless. Your design is likely flawed if you find yourself using "free_me" for anything other than passing to "Safefree".

    Upon return, the number of variants in the string can be computed by having saved the value of *lenp before the call, and subtracting the after-call value of *lenp from it.

    If you want to convert to UTF-8 from encodings other than the native (Latin1 or EBCDIC), see "sv_recode_to_utf8"().

     U8 *       bytes_to_utf8        (      const U8 *s, STRLEN *lenp)
     U8 *  Perl_bytes_to_utf8        (pTHX_ const U8 *s, STRLEN *lenp)
     U8 *       bytes_to_utf8_free_me(      const U8 *s, STRLEN *lenp,
                                            void **free_me)
     U8 *  Perl_bytes_to_utf8_free_me(pTHX_ const U8 *s, STRLEN *lenp,
                                            void **free_me)
     U8 *       bytes_to_utf8_temp_pv(      const U8 *s, STRLEN *lenp)
     U8 *  Perl_bytes_to_utf8_temp_pv(pTHX_ const U8 *s, STRLEN *lenp)

"c9strict_utf8_to_uv*"
    Described under "utf8_to_uv"

"DO_UTF8"
    Returns a bool giving whether or not the PV in "sv" is to be treated as being encoded in UTF-8.

    You should use this after a call to SvPV() or one of its variants, in case any call to string overloading updates the internal UTF-8 encoding flag.

     bool  DO_UTF8(SV* sv)

"extended_utf8_to_uv*"
    Described under "utf8_to_uv"

"foldEQ_utf8"
    Returns true if the leading portions of the strings "s1" and "s2" (either or both of which may be in UTF-8) are the same case-insensitively; false otherwise. How far into the strings to compare is determined by other input parameters.

    If "u1" is true, the string "s1" is assumed to be in UTF-8-encoded Unicode; otherwise it is assumed to be in native 8-bit encoding. Correspondingly for "u2" with respect to "s2".

    If the byte length "l1" is non-zero, it says how far into "s1" to check for fold equality. In other words, "s1"+"l1" will be used as a goal to reach. The scan will not be considered to be a match unless the goal is reached, and scanning won't continue past that goal. Correspondingly for "l2" with respect to "s2".

    If "pe1" is non-"NULL" and the pointer it points to is not "NULL", that pointer is considered an end pointer to the position 1 byte past the maximum point in "s1" beyond which scanning will not continue under any circumstances. (This routine assumes that UTF-8 encoded input strings are not malformed; malformed input can cause it to read past "pe1"). This means that if both "l1" and "pe1" are specified, and "pe1" is less than "s1"+"l1", the match will never be successful because it can never get as far as its goal (and in fact is asserted against). Correspondingly for "pe2" with respect to "s2".

    At least one of "s1" and "s2" must have a goal (at least one of "l1" and "l2" must be non-zero), and if both do, both have to be reached for a successful match. Also, if the fold of a character is multiple characters, all of them must be matched (see tr21 reference below for 'folding').

    Upon a successful match, if "pe1" is non-"NULL", it will be set to point to the beginning of the next character of "s1" beyond what was matched. Correspondingly for "pe2" and "s2".

    For case-insensitiveness, the "casefolding" of Unicode is used instead of upper/lowercasing both the characters, see <https://www.unicode.org/reports/tr21/> (Case Mappings).

     I32  foldEQ_utf8(const char *s1, char **pe1, UV l1, bool u1,
                      const char *s2, char **pe2, UV l2, bool u2)

"is_ascii_string*"
    Described under "is_utf8_invariant_string"

"is_c9strict_utf8_string*"
"is_c9strict_utf8_string_loc*"
"is_c9strict_utf8_string_loclen*"
    Described under "is_utf8_string"

"is_invariant_string*"
    Described under "is_utf8_invariant_string"

"is_strict_utf8_string*"
"is_strict_utf8_string_loc*"
"is_strict_utf8_string_loclen*"
    Described under "is_utf8_string"

"is_utf8_char_buf*"
    Described under "isUTF8_CHAR"

"is_utf8_fixed_width_buf_flags"
"is_utf8_fixed_width_buf_loc_flags"
"is_utf8_fixed_width_buf_loclen_flags"
    These each return TRUE if the fixed-width buffer starting at "s" with length "len" is entirely valid UTF-8, subject to the restrictions given by "flags"; otherwise they return FALSE.

    If "flags" is 0, any well-formed UTF-8, as extended by Perl, is accepted without restriction. If the final few bytes of the buffer do not form a complete code point, this will return TRUE anyway, provided that "is_utf8_valid_partial_char_flags" returns TRUE for them.

    "flags" can be zero or any combination of the "UTF8_DISALLOW_foo" flags accepted by "utf8_to_uv", and with the same meanings.

    The functions differ from "is_utf8_string_flags" only in that the latter returns FALSE if the final few bytes of the string don't form a complete code point.

    "is_utf8_fixed_width_buf_loc_flags"> does all the preceding, but takes an extra parameter, "ep" into which it stores the location of the failure, if "ep" is not NULL. If instead the function returns TRUE, *ep will point to the beginning of any partial character at the end of the buffer; if there is no partial character *ep will contain "s"+"len".

    "is_utf8_fixed_width_buf_loclen_flags"> does all the preceding, but takes another extra parameter, "el" into which it stores the number of complete, valid characters found, if "el" is not NULL.

     bool       is_utf8_fixed_width_buf_flags       (
                                                  const U8 * const s,
                                                   STRLEN len,
                                                   const U32 flags)
     bool       is_utf8_fixed_width_buf_loc_flags   (
                                                  const U8 * const s,
                                                   STRLEN len,
                                                   const U8 **ep,
                                                   const U32 flags)
     bool       is_utf8_fixed_width_buf_loclen_flags(
                                                  const U8 * const s,
                                                   STRLEN len,
                                                   const U8 **ep,
                                                   STRLEN *el,
                                                   const U32 flags)
     bool  Perl_is_utf8_fixed_width_buf_loclen_flags(
                                                  const U8 * const s,
                                                   STRLEN len,
                                                   const U8 **ep,
                                                   STRLEN *el,
                                                   const U32 flags)

"is_utf8_invariant_string"
"is_utf8_invariant_string_loc"
"is_ascii_string"
"is_invariant_string"
    These each return TRUE if the first "len" bytes of the string "s" are the same regardless of the UTF-8 encoding of the string (or UTF-EBCDIC encoding on EBCDIC machines); otherwise they returns FALSE. That is, they return TRUE if they are UTF-8 invariant. On ASCII-ish machines, all the ASCII characters and only the ASCII characters fit this definition. On EBCDIC machines, the ASCII-range characters are invariant, but so also are the C1 controls.

    If "len" is 0, it will be calculated using strlen(s), (which means if you use this option, that "s" can't have embedded "NUL" characters and has to have a terminating "NUL" byte).

    All forms except "is_utf8_invariant_string_loc" have identical behavior. The only difference with it is that it has an extra pointer parameter, "ep", into which, if it isn't NULL, the location of the first UTF-8 variant character in the "ep" pointer will be stored upon failure. If all characters are UTF-8 invariant, this function does not change the contents of *ep.

    "is_invariant_string" is somewhat misleadingly named. "is_utf8_invariant_string" is preferred, as it indicates under what conditions the string is invariant.

    "is_ascii_string" is misleadingly-named. On ASCII-ish platforms, the name isn't misleading: the ASCII-range characters are exactly the UTF-8 invariants. But EBCDIC machines have more UTF-8 invariants than just the ASCII characters, so the name "is_utf8_invariant_string" is preferred.

    See also "is_utf8_string" and "is_utf8_fixed_width_buf_flags".

     bool       is_utf8_invariant_string    (const U8 * const s,
                                             STRLEN len)
     bool       is_utf8_invariant_string_loc(const U8 * const s,
                                             STRLEN len,
                                             const U8 **ep)
     bool  Perl_is_utf8_invariant_string_loc(const U8 * const s,
                                             STRLEN len,
                                             const U8 **ep)
     bool       is_ascii_string             (const U8 * const s,
                                             STRLEN len)
     bool       is_invariant_string         (const U8 * const s,
                                             STRLEN len)

"is_utf8_string"
"is_utf8_string_loc"
"is_utf8_string_loclen"
"is_strict_utf8_string"
"is_strict_utf8_string_loc"
"is_strict_utf8_string_loclen"
"is_c9strict_utf8_string"
"is_c9strict_utf8_string_loc"
"is_c9strict_utf8_string_loclen"
"is_utf8_string_flags"
"is_utf8_string_loc_flags"
"is_utf8_string_loclen_flags"
    These each return TRUE if the first "len" bytes of string "s" form a valid UTF-8 string for varying degrees of strictness, FALSE otherwise. If "len" is 0, it will be calculated using strlen(s) (which means if you use this option, that "s" can't have embedded "NUL" characters and has to have a terminating "NUL" byte). Note that all characters being ASCII constitute 'a valid UTF-8 string'.

    Some of the functions also return information about the string. Those that have the suffix "_loc" in their names have an extra parameter, "ep". If that is not NULL, the function stores into it the location of how far it got in parsing "s". If the function is returning TRUE, this will be a pointer to the byte immediately after the end of "s". If FALSE, it will be the location of the first byte that fails the criteria.

    The functions that instead have the suffix "_loclen" have a second extra parameter, "el". They act as the plain "_loc" functions do with their "ep" parameter, but if "el" is not null, the functions store into it the number of UTF-8 encoded characters found at the point where parsing stopped. If the function is returning TRUE, this will be the full count of the UTF-8 characters in "s"; if FALSE, it will be the count before the first invalid one.

    "is_utf8_string" (and "is_utf8_string_loc" and "is_utf8_string_loclen") consider Perl's extended UTF-8 to be valid. That means that code points above Unicode, surrogates, and non-character code points are all considered valid by this function. Problems may arise in interchange with non-Perl applications, or (unlikely) between machines with different word sizes.

    "is_strict_utf8_string" (and "is_strict_utf8_string_loc" and "is_strict_utf8_string_loclen") consider only Unicode-range (0 to 0x10FFFF) code points to be valid, with the surrogates and non-character code points invalid. This level of strictness is what is safe to accept from outside sources that use Unicode rules.

    The forms whose names contain "c9strict" conform to the level of strictness given in Unicode Corrigendum #9 <http://www.unicode.org/versions/corrigendum9.html>. This means Unicode-range code points including non-character ones are considered valid, but not the surrogates. This level of strictness is considered safe for cooperating components that know how the other components handle non-character code points.

    The forms whose names contain "_flags" allow you to customize the acceptable level of strictness. They have an extra parameter, "flags" to indicate the types of code points that are acceptable. If "flags" is 0, they give the same results as "is_utf8_string" (and kin); if "flags" is "UTF8_DISALLOW_ILLEGAL_INTERCHANGE", they give the same results as "is_strict_utf8_string" (and kin); and if "flags" is "UTF8_DISALLOW_ILLEGAL_C9_INTERCHANGE", they give the same results as "is_c9strict_utf8_string" (and kin). Otherwise "flags" may be any combination of the "UTF8_DISALLOW_foo" flags understood by "utf8_to_uv", with the same meanings.

    It's better to use one of the non-"_flags" functions if they give you the desired strictness, as those have a better chance of being inlined by the C compiler.

    See also "is_utf8_invariant_string", "is_utf8_fixed_width_buf_flags",

     bool       is_utf8_string                (const U8 *s,
                                               STRLEN len)
     bool       is_utf8_string_loc            (const U8 *s,
                                               const STRLEN len,
                                               const U8 **ep)
     bool  Perl_is_utf8_string_loc            (const U8 *s,
                                               const STRLEN len,
                                               const U8 **ep)
     bool       is_utf8_string_loclen         (const U8 *s,
                                               STRLEN len,
                                               const U8 **ep,
                                               STRLEN *el)
     bool  Perl_is_utf8_string_loclen         (const U8 *s,
                                               STRLEN len,
                                               const U8 **ep,
                                               STRLEN *el)
     bool       is_strict_utf8_string         (const U8 *s,
                                               STRLEN len)
     bool       is_strict_utf8_string_loc     (const U8 *s,
                                               STRLEN len,
                                               const U8 **ep)
     bool       is_strict_utf8_string_loclen  (const U8 *s,
                                               STRLEN len,
                                               const U8 **ep,
                                               STRLEN *el)
     bool  Perl_is_strict_utf8_string_loclen  (const U8 *s,
                                               STRLEN len,
                                               const U8 **ep,
                                               STRLEN *el)
     bool       is_c9strict_utf8_string       (const U8 *s,
                                               STRLEN len)
     bool       is_c9strict_utf8_string_loc   (const U8 *s,
                                               STRLEN len,
                                               const U8 **ep)
     bool       is_c9strict_utf8_string_loclen(const U8 *s,
                                               STRLEN len,
                                               const U8 **ep,
                                               STRLEN *el)
     bool  Perl_is_c9strict_utf8_string_loclen(const U8 *s,
                                               STRLEN len,
                                               const U8 **ep,
                                               STRLEN *el)
     bool       is_utf8_string_flags          (const U8 *s,
                                               STRLEN len,
                                               const U32 flags)
     bool  Perl_is_utf8_string_flags          (const U8 *s,
                                               STRLEN len,
                                               const U32 flags)
     bool       is_utf8_string_loc_flags      (const U8 *s,
                                               STRLEN len,
                                               const U8 **ep,
                                               const U32 flags)
     bool       is_utf8_string_loclen_flags   (const U8 *s,
                                               STRLEN len,
                                               const U8 **ep,
                                               STRLEN *el,
                                               const U32 flags)
     bool  Perl_is_utf8_string_loclen_flags   (const U8 *s,
                                               STRLEN len,
                                               const U8 **ep,
                                               STRLEN *el,
                                               const U32 flags)

"is_utf8_valid_partial_char"
"is_utf8_valid_partial_char_flags"
    These each return FALSE if the sequence of bytes starting at "s" and looking no further than "e - 1" is the UTF-8 encoding for one or more code points. That is, FALSE is returned if "s" points to at least one entire UTF-8 encoded character.

    Otherwise, they return TRUE if there exists at least one non-empty sequence of bytes that when appended to sequence "s", starting at position "e" causes the entire sequence to be the well-formed UTF-8 of some code point

    In other words they return TRUE if "s" points to an incomplete UTF-8-encoded code point; FALSE otherwise.

    This is useful when a fixed-length buffer is being tested for being well-formed UTF-8, but the final few bytes in it don't comprise a full character; that is, it is split somewhere in the middle of the final code point's UTF-8 representation. (Presumably when the buffer is refreshed with the next chunk of data, the new first bytes will complete the partial code point.) This function is used to verify that the final bytes in the current buffer are in fact the legal beginning of some code point, so that if they aren't, the failure can be signalled without having to wait for the next read.

    "is_utf8_valid_partial_char" behaves identically to "is_utf8_valid_partial_char_flags" when the latter is called with a zero "flags" parameter. This parameter is used to restrict the classes of code points that are considered to be valid. When zero, Perl's extended UTF-8 is used. Otherwise "flags" can be any combination of the "UTF8_DISALLOW_foo" flags accepted by "utf8_to_uv". If there is any sequence of bytes that can complete the input partial character in such a way that a non-prohibited character is formed, the function returns TRUE; otherwise FALSE. Non-character code points cannot be determined based on partial character input, so TRUE is always returned if "s" looks like it could be the beginning on one of those. But many of the other possible excluded types can be determined from just the first one or two bytes.

     bool       is_utf8_valid_partial_char      (const U8 * const s0,
                                                 const U8 * const e)
     bool       is_utf8_valid_partial_char_flags(const U8 * const s0,
                                                 const U8 * const e,
                                                 const U32 flags)
     bool  Perl_is_utf8_valid_partial_char_flags(const U8 * const s0,
                                                 const U8 * const e,
                                                 const U32 flags)

"isUTF8_CHAR"
"isSTRICT_UTF8_CHAR"
"isC9_STRICT_UTF8_CHAR"
"isUTF8_CHAR_flags"
"is_utf8_char_buf"
    These each evaluate to non-zero if the first few bytes of the string starting at "s" and looking no further than "e - 1" are well-formed UTF-8 that represents some code point, for varying degrees of strictness. Otherwise they evaluate to 0. If non-zero, the value gives how many bytes starting at "s" comprise the code point's representation. Any bytes remaining before "e", but beyond the ones needed to form the first code point in "s", are not examined.

    These are used to efficiently decide if the next few bytes in "s" are legal UTF-8 for a single character.

    With "isUTF8_CHAR", the code point can be any that will fit in an IV on this machine, using Perl's extension to official UTF-8 to represent those higher than the Unicode maximum of 0x10FFFF. That means that this will consider byte sequences to be valid that are unrecognized or considered illegal by non-Perl applications.

    With "isSTRICT_UTF8_CHAR", acceptable code points are restricted to those defined by Unicode to be fully interchangeable across applications. This means code points above the Unicode range (max legal is 0x10FFFF), surrogates, and non-character code points are rejected.

    With "isC9_STRICT_UTF8_CHAR", acceptable code points are restricted to those defined by Unicode to be fully interchangeable within an application. This means code points above the Unicode range and surrogates are rejected, but non-character code points are accepted. See Unicode Corrigendum #9 <http://www.unicode.org/versions/corrigendum9.html>.

    Use "isUTF8_CHAR_flags" to customize what code points are acceptable. If "flags" is 0, this gives the same results as "isUTF8_CHAR"; if "flags" is "UTF8_DISALLOW_ILLEGAL_INTERCHANGE", this gives the same results as "isSTRICT_UTF8_CHAR"; and if "flags" is "UTF8_DISALLOW_ILLEGAL_C9_INTERCHANGE", this gives the same results as "isC9_STRICT_UTF8_CHAR". Otherwise "flags" may be any combination of the "UTF8_DISALLOW_foo" flags understood by "utf8_to_uv", with the same meanings.

    The three alternative macros are for the most commonly needed validations; they are likely to run somewhat faster than this more general one, as they can be inlined into your code.

    Use one of the "is_utf8_string" forms to check entire strings.

    Note also that a UTF-8 "invariant" character (i.e. ASCII on non-EBCDIC machines) is a valid UTF-8 character.

    "is_utf8_char_buf" is the old name for "isUTF8_CHAR". Do not use it in new code.

     Size_t       isUTF8_CHAR          (const U8 * const s0,
                                        const U8 * const e)
     Size_t  Perl_isUTF8_CHAR          (const U8 * const s0,
                                        const U8 * const e)
     Size_t       isSTRICT_UTF8_CHAR   (const U8 * const s0,
                                        const U8 * const e)
     Size_t  Perl_isSTRICT_UTF8_CHAR   (const U8 * const s0,
                                        const U8 * const e)
     Size_t       isC9_STRICT_UTF8_CHAR(const U8 * const s0,
                                        const U8 * const e)
     Size_t  Perl_isC9_STRICT_UTF8_CHAR(const U8 * const s0,
                                        const U8 * const e)
     Size_t       isUTF8_CHAR_flags    (const U8 * const s0,
                                        const U8 * const e,
                                        const U32 flags)
     Size_t  Perl_isUTF8_CHAR_flags    (const U8 * const s0,
                                        const U8 * const e,
                                        const U32 flags)
     STRLEN       is_utf8_char_buf     (const U8 *buf,
                                        const U8 *buf_end)
     STRLEN  Perl_is_utf8_char_buf     (const U8 *buf,
                                        const U8 *buf_end)

"LATIN1_TO_NATIVE"
    Returns the native equivalent of the input Latin-1 code point (including ASCII and control characters) given by "ch". Thus, LATIN1_TO_NATIVE(66) on EBCDIC platforms returns 194. These each represent the character "B" on their respective platforms. On ASCII platforms no conversion is needed, so this macro expands to just its input, adding no time nor space requirements to the implementation.

    For conversion of code points potentially larger than will fit in a character, use "UNI_TO_NATIVE".

     U8  LATIN1_TO_NATIVE(U8 ch)

"NATIVE_TO_LATIN1"
    Returns the Latin-1 (including ASCII and control characters) equivalent of the input native code point given by "ch". Thus, NATIVE_TO_LATIN1(193) on EBCDIC platforms returns 65. These each represent the character "A" on their respective platforms. On ASCII platforms no conversion is needed, so this macro expands to just its input, adding no time nor space requirements to the implementation.

    For conversion of code points potentially larger than will fit in a character, use "NATIVE_TO_UNI".

     U8  NATIVE_TO_LATIN1(U8 ch)

"NATIVE_TO_UNI"
    Returns the Unicode equivalent of the input native code point given by "ch". Thus, NATIVE_TO_UNI(195) on EBCDIC platforms returns 67. These each represent the character "C" on their respective platforms. On ASCII platforms no conversion is needed, so this macro expands to just its input, adding no time nor space requirements to the implementation.

     UV  NATIVE_TO_UNI(UV ch)

"pv_uni_display"
    Build to the scalar "dsv" a displayable version of the UTF-8 encoded string "spv", length "len", the displayable version being at most "pvlim" bytes long (if longer, the rest is truncated and "..." will be appended).

    The "flags" argument can have any combination of these flag bits

    "UNI_DISPLAY_ISPRINT"
        to display isPRINT()able characters as themselves

    "UNI_DISPLAY_BACKSLASH"
        to display the "\\[nrfta\\]" as the backslashed versions (like "\n")

        ("UNI_DISPLAY_BACKSLASH" is preferred over "UNI_DISPLAY_ISPRINT" for "\\").

    "UNI_DISPLAY_BACKSPACE"
        to display "\b" for a backspace, but only when "UNI_DISPLAY_BACKSLASH" also is set.

    "UNI_DISPLAY_REGEX"
        This a shorthand for "UNI_DISPLAY_ISPRINT" along with "UNI_DISPLAY_BACKSLASH".

    "UNI_DISPLAY_QQ"
        This a shorthand for all three "UNI_DISPLAY_ISPRINT", "UNI_DISPLAY_BACKSLASH", and "UNI_DISPLAY_BACKSLASH".

    The pointer to the PV of the "dsv" is returned.

    See also "sv_uni_display".

     char *       pv_uni_display(      SV *dsv, const U8 *spv,
                                       STRLEN len, STRLEN pvlim,
                                       UV flags)
     char *  Perl_pv_uni_display(pTHX_ SV *dsv, const U8 *spv,
                                       STRLEN len, STRLEN pvlim,
                                       UV flags)

"REPLACEMENT_CHARACTER_UTF8"
    This is a macro that evaluates to a string constant of the UTF-8 bytes that define the Unicode REPLACEMENT CHARACTER (U+FFFD) for the platform that perl is compiled on. This allows code to use a mnemonic for this character that works on both ASCII and EBCDIC platforms. "sizeof(REPLACEMENT_CHARACTER_UTF8) - 1" can be used to get its length in bytes.

"strict_utf8_to_uv*"
    Described under "utf8_to_uv"

"sv_cat_decode"
    "encoding" is assumed to be an "Encode" object, the PV of "ssv" is assumed to be octets in that encoding and decoding the input starts from the position which "(PV + *offset)" pointed to. "dsv" will be concatenated with the decoded UTF-8 string from "ssv". Decoding will terminate when the string "tstr" appears in decoding output or the input ends on the PV of "ssv". The value which "offset" points will be modified to the last input position on "ssv".

    Returns TRUE if the terminator was found, else returns FALSE.

     bool       sv_cat_decode(      SV *dsv, SV *encoding, SV *ssv,
                                    int *offset, char *tstr, int tlen)
     bool  Perl_sv_cat_decode(pTHX_ SV *dsv, SV *encoding, SV *ssv,
                                    int *offset, char *tstr, int tlen)

"sv_recode_to_utf8"
    "encoding" is assumed to be an "Encode" object, on entry the PV of "sv" is assumed to be octets in that encoding, and "sv" will be converted into Unicode (and UTF-8).

    If "sv" already is UTF-8 (or if it is not "POK"), or if "encoding" is not a reference, nothing is done to "sv". If "encoding" is not an "Encode::XS" Encoding object, bad things will happen. (See encoding and Encode.)

    The PV of "sv" is returned.

     char *       sv_recode_to_utf8(      SV *sv, SV *encoding)
     char *  Perl_sv_recode_to_utf8(pTHX_ SV *sv, SV *encoding)

"sv_uni_display"
    Build to the scalar "dsv" a displayable version of the scalar "sv", the displayable version being at most "pvlim" bytes long (if longer, the rest is truncated and "..." will be appended).

    The "flags" argument is as in "pv_uni_display"().

    The pointer to the PV of the "dsv" is returned.

     char *       sv_uni_display(      SV *dsv, SV *ssv, STRLEN pvlim,
                                       UV flags)
     char *  Perl_sv_uni_display(pTHX_ SV *dsv, SV *ssv, STRLEN pvlim,
                                       UV flags)

"UNI_TO_NATIVE"
    Returns the native equivalent of the input Unicode code point given by "ch". Thus, UNI_TO_NATIVE(68) on EBCDIC platforms returns 196. These each represent the character "D" on their respective platforms. On ASCII platforms no conversion is needed, so this macro expands to just its input, adding no time nor space requirements to the implementation.

     UV  UNI_TO_NATIVE(UV ch)

"UNICODE_IS_NONCHAR"
    Returns a boolean as to whether or not "uv" is one of the Unicode non-character code points

     bool  UNICODE_IS_NONCHAR(const UV uv)

"UNICODE_IS_REPLACEMENT"
    Returns a boolean as to whether or not "uv" is the Unicode REPLACEMENT CHARACTER

     bool  UNICODE_IS_REPLACEMENT(const UV uv)

"UNICODE_IS_SUPER"
    Returns a boolean as to whether or not "uv" is above the maximum legal Unicode code point of U+10FFFF.

     bool  UNICODE_IS_SUPER(const UV uv)

"UNICODE_IS_SURROGATE"
    Returns a boolean as to whether or not "uv" is one of the Unicode surrogate code points

     bool  UNICODE_IS_SURROGATE(const UV uv)

"UNICODE_REPLACEMENT"
    Evaluates to 0xFFFD, the code point of the Unicode REPLACEMENT CHARACTER

"UTF8_CHK_SKIP*"
    Described under "UTF8SKIP"

"utf8_distance"
    Returns the number of UTF-8 characters between the UTF-8 pointers "a" and "b".

    WARNING: use only if you *know* that the pointers point inside the same UTF-8 buffer.

     IV       utf8_distance(      const U8 *a, const U8 *b)
     IV  Perl_utf8_distance(pTHX_ const U8 *a, const U8 *b)

"utf8_hop"
    Return the UTF-8 pointer "s" displaced by "off" characters, either forward (if "off" is positive) or backward (if negative). "s" does not need to be pointing to the starting byte of a character. If it isn't, one count of "off" will be used up to get to the start of the next character for forward hops, and to the start of the current character for negative ones.

    WARNING: Prefer "utf8_hop_safe" to this one.

    Do NOT use this function unless you know "off" is within the UTF-8 data pointed to by "s" and that on entry "s" is aligned on the first byte of a character or just after the last byte of a character.

     U8 *       utf8_hop(const U8 *s, SSize_t off)
     U8 *  Perl_utf8_hop(const U8 *s, SSize_t off)

"utf8_hop_back"
"utf8_hop_back_overshoot"
    These each take as input a string encoded as UTF-8 which starts at "start", and a position into it given by "s", and return the position within it that is "s" displaced by up to "off" characters backwards.

    If there are fewer than "off" characters between "start" and "s", the functions return "start".

    The functions differ in that "utf8_hop_back_overshoot" can return how many characters "off" beyond the edge the request was for. When its parameter, &remaining, is not NULL, the function stores into it the count of the excess; zero if the request was completely fulfilled. The actual number of characters that were displaced can then be calculated as "off - remaining". This function acts identically to plain "utf8_hop_back" when this parameter is NULL.

    "s" does not need to be pointing to the starting byte of a character. If it isn't, one count of "off" will be used up to get to that start.

    "off" must be non-positive, and if zero, no action is taken; "s" is returned unchanged. That it otherwise must be negative means that the earlier description is a lie, to avoid burdening you with this detail too soon. An "off" of -2 means to displace two characters backwards, so the displacement is actually the absolute value of "off". "remaining" will also be non-positive. If there was only one character between "start" and "s", and a displacement of -2 was requested, "remaining" would be set to -1. The subtraction formula works, yielding the result that only -1 character was displaced.

     U8 *       utf8_hop_back          (const U8 *s, SSize_t off,
                                        const U8 * const start)
     U8 *  Perl_utf8_hop_back          (const U8 *s, SSize_t off,
                                        const U8 * const start)
     U8 *       utf8_hop_back_overshoot(const U8 *s, SSize_t off,
                                        const U8 * const start,
                                        SSize_t *remaining)
     U8 *  Perl_utf8_hop_back_overshoot(const U8 *s, SSize_t off,
                                        const U8 * const start,
                                        SSize_t *remaining)

"utf8_hop_forward"
"utf8_hop_forward_overshoot"
    These each take as input a position, "s0", into a string encoded as UTF-8 which ends at the byte before "end", and return the position within it that is "s0" displaced by up to "off" characters forwards.

    If there are fewer than "off" characters between "s0" and "end", the functions return "end".

    The functions differ in two ways

    •   "utf8_hop_forward_overshoot" can return how many characters beyond the edge the request was for. When its parameter, &remaining, is not NULL, the function stores into it the count of the excess; zero if the request was completely fulfilled. The actual number of characters that were displaced can then be calculated as "off - remaining".

    •   "utf8_hop_forward" will panic if called with "s0" already positioned at or beyond the edge of the string ending at "end" and the request is to go even further over the edge. "utf8_hop_forward_overshoot" presumes the caller will handle any errors, and just stores "off" into "remaining" without doing anything else.

    (The above contains a slight lie. When "remaining" is NULL, the two functions act identically.)

    "s0" does not need to be pointing to the starting byte of a character. If it isn't, one count of "off" will be used up to get to that start.

    "off" must be non-negative, and if zero, no action is taken; "s0" is returned unchanged.

     U8 *       utf8_hop_forward          (const U8 *s, SSize_t off,
                                           const U8 * const end)
     U8 *  Perl_utf8_hop_forward          (const U8 *s, SSize_t off,
                                           const U8 * const end)
     U8 *       utf8_hop_forward_overshoot(const U8 *s, SSize_t off,
                                           const U8 * const end,
                                           SSize_t *remaining)
     U8 *  Perl_utf8_hop_forward_overshoot(const U8 *s, SSize_t off,
                                           const U8 * const end,
                                           SSize_t *remaining)

"utf8_hop_safe"
"utf8_hop_overshoot"
    These each take as input a string encoded as UTF-8 which starts at "start", ending at "end", and a position into it given by "s", and return the position within it that is "s" displaced by up to "off" characters, either forwards if "off" is positive, or backwards if "off" is negative. (Nothing is done if "off" is 0.)

    If there are fewer than "off" characters between "s" and the respective edge, the functions return that edge.

    The functions differ in that "utf8_hop_overshoot" can return how many characters beyond the edge the request was for. When its parameter, &remaining, is not NULL, the function stores into it the count of the excess; zero if the request was completely fulfilled. The actual number of characters that were displaced can then be calculated as "off - remaining". This function acts identically to plain "utf8_hop_safe" when this parameter is NULL.

    "s" does not need to be pointing to the starting byte of a character. If it isn't, one count of "off" will be used up to get to that start.

    To be more precise, the displacement is by the absolute value of "off", and the excess count is the absolute value of "remaining".

     U8 *       utf8_hop_safe     (const U8 *s, SSize_t off,
                                   const U8 * const start,
                                   const U8 * const end)
     U8 *  Perl_utf8_hop_safe     (const U8 *s, SSize_t off,
                                   const U8 * const start,
                                   const U8 * const end)
     U8 *       utf8_hop_overshoot(const U8 *s, SSize_t off,
                                   const U8 * const start,
                                   const U8 * const end,
                                   SSize_t *remaining)
     U8 *  Perl_utf8_hop_overshoot(const U8 *s, SSize_t off,
                                   const U8 * const start,
                                   const U8 * const end,
                                   SSize_t *remaining)

"UTF8_IS_INVARIANT"
    Evaluates to 1 if the byte "c" represents the same character when encoded in UTF-8 as when not; otherwise evaluates to 0. UTF-8 invariant characters can be copied as-is when converting to/from UTF-8, saving time.

    In spite of the name, this macro gives the correct result if the input string from which "c" comes is not encoded in UTF-8.

    See "UVCHR_IS_INVARIANT" for checking if a UV is invariant.

     bool  UTF8_IS_INVARIANT(char c)

"UTF8_IS_NONCHAR"
    Evaluates to non-zero if the first few bytes of the string starting at "s" and looking no further than "e - 1" are well-formed UTF-8 that represents one of the Unicode non-character code points; otherwise it evaluates to 0. If non-zero, the value gives how many bytes starting at "s" comprise the code point's representation.

     bool  UTF8_IS_NONCHAR(const U8 *s, const U8 *e)

"UTF8_IS_REPLACEMENT"
    Evaluates to non-zero if the first few bytes of the string starting at "s" and looking no further than "e - 1" are well-formed UTF-8 that represents the Unicode REPLACEMENT CHARACTER; otherwise it evaluates to 0. If non-zero, the value gives how many bytes starting at "s" comprise the code point's representation.

     bool  UTF8_IS_REPLACEMENT(const U8 *s, const U8 *e)

"UTF8_IS_SUPER"
    Recall that Perl recognizes an extension to UTF-8 that can encode code points larger than the ones defined by Unicode, which are 0..0x10FFFF.

    This macro evaluates to non-zero if the first few bytes of the string starting at "s" and looking no further than "e - 1" are from this UTF-8 extension; otherwise it evaluates to 0. If non-zero, the return is how many bytes starting at "s" comprise the code point's representation.

    0 is returned if the bytes are not well-formed extended UTF-8, or if they represent a code point that cannot fit in a UV on the current platform. Hence this macro can give different results when run on a 64-bit word machine than on one with a 32-bit word size.

    Note that it is illegal in Perl to have code points that are larger than what can fit in an IV on the current machine; and illegal in Unicode to have any that this macro matches

     bool  UTF8_IS_SUPER(const U8 *s, const U8 *e)

"UTF8_IS_SURROGATE"
    Evaluates to non-zero if the first few bytes of the string starting at "s" and looking no further than "e - 1" are well-formed UTF-8 that represents one of the Unicode surrogate code points; otherwise it evaluates to 0. If non-zero, the value gives how many bytes starting at "s" comprise the code point's representation.

     bool  UTF8_IS_SURROGATE(const U8 *s, const U8 *e)

"utf8_length"
    Returns the number of characters in the sequence of UTF-8-encoded bytes starting at "s" and ending at the byte just before "e". If <s> and <e> point to the same place, it returns 0 with no warning raised.

    If "e < s" or if the scan would end up past "e", it raises a UTF8 warning and returns the number of valid characters.

     STRLEN       utf8_length(      const U8 *s0, const U8 *e)
     STRLEN  Perl_utf8_length(pTHX_ const U8 *s0, const U8 *e)

"UTF8_MAXBYTES"
    The maximum width of a single UTF-8 encoded character, in bytes.

    NOTE: Strictly speaking Perl's UTF-8 should not be called UTF-8 since UTF-8 is an encoding of Unicode, and Unicode's upper limit, 0x10FFFF, can be expressed with 4 bytes. However, Perl thinks of UTF-8 as a way to encode non-negative integers in a binary format, even those above Unicode.

"UTF8_MAXBYTES_CASE"
    The maximum number of UTF-8 bytes a single Unicode character can uppercase/lowercase/titlecase/fold into.

"UTF8_SAFE_SKIP*"
"UTF8_SKIP*"
    Described under "UTF8SKIP"

"utf8_to_bytes_overwrite"
"utf8_to_bytes_new_pv"
"utf8_to_bytes_temp_pv"
"utf8_to_bytes"
"bytes_from_utf8"
    NOTE: "utf8_to_bytes" is experimental and may change or be removed without notice.

    These each convert a string encoded as UTF-8 into the equivalent native byte representation, if possible. The first three forms are preferred; their API is more convenient to use, and each return "true" if the result is in bytes; "false" if the conversion failed.

    •   "utf8_to_bytes_overwrite"

    •   "utf8_to_bytes_new_pv"

    •   "utf8_to_bytes_temp_pv"

        These differ primarily in the form of the returned string and the allowed constness of the input string. In each, if the input string was already in native bytes or was not convertible, the input isn't changed.

        In each of these three functions, the input "s_ptr" is a pointer to the string to be converted and *lenp is its length (so that the first byte will be at *sptr[0]).

        "utf8_to_bytes_overwrite" overwrites the input string with the bytes conversion. Hence, the input string should not be "const". (Converting the multi-byte UTF-8 encoding to single bytes never expands the result, so overwriting is always feasible.)

        Both "utf8_to_bytes_new_pv" and "utf8_to_bytes_temp_pv" allocate new memory to hold the converted string, never changing the input. Hence the input string may be "const". They differ in that "utf8_to_bytes_temp_pv" arranges for the new memory to automatically be freed. With "utf8_to_bytes_new_pv", the caller is responsible for freeing the memory. As explained below, not all successful calls result in new memory being allocated. Hence this function also returns to the caller (via an extra parameter, *free_me) a pointer to any new memory, or "NULL" if none was allocated.

        The functions return "false" when the input is not well-formed UTF-8 or contains at least one UTF-8 sequence that represents a code point that can't be expressed as a byte. The contents of *s_ptr and *lenp are not changed. "utf8_to_bytes_new_pv" sets *free_me to "NULL".

        They all return "true" when either:

        The input turned out to already be in bytes form
            The contents of *s_ptr and *lenp are not changed. "utf8_to_bytes_new_pv" sets *free_me to "NULL".

        The input was successfully converted
            For "utf8_to_bytes_overwrite"
                The input string *s_ptr was overwritten with the native bytes, including a NUL terminator. *lenp has been updated with the new length.

            For "utf8_to_bytes_new_pv" and "utf8_to_bytes_temp_pv"
                The input string was not changed. Instead, new memory has been allocated containing the translation of the input into native bytes, with a NUL terminator byte. *s_ptr now points to that new memory, and *lenp contains its length.

                For "utf8_to_bytes_temp_pv", the new memory has been arranged to be automatically freed, via a call to "SAVEFREEPV".

                For "utf8_to_bytes_new_pv", *free_me has been set to *s_ptr, and it is the caller's responsibility to free the new memory when done using it. The following paradigm is convenient to use for this:

                 void * free_me;
                 if (utf8_to_bytes_new_pv(&s, &len, &free_me) {
                    ...
                 }
                 else {
                    ...
                 }

                 ...

                 Safefree(free_me);

                "free_me" can be used as a boolean (non-NULL meaning "true") to indicate that the input was indeed changed if you need to revisit that later in the code. Your design is likely flawed if you find yourself using "free_me" for any other purpose.

        Note that in all cases, *s_ptr and *lenp will have correct and consistent values, updated as was necessary.

        Also note that upon successful conversion, the number of variants in the string can be computed by having saved the value of *lenp before the call, and subtracting the after-call value of *lenp from it. This is also true for the other two functions described below.

    •   "utf8_to_bytes"

        Plain "utf8_to_bytes" (which has never lost its experimental status) also converts a UTF-8 encoded string to bytes, but there are more glitches that the caller has to be prepared to handle.

        The input string is passed with one less indirection level, "s".

        If the conversion was a noop
            The contents of "s" and *lenp are not changed, and the function returns "s".

        If the conversion was successful
            The contents of "s" were changed, and *lenp updated to be the correct length. The function returns "s" (unchanged).

        If the conversion failed
            The contents of "s" were not changed.

            The function returns NULL and sets *lenp to -1, cast to "STRLEN". This means that you will have to use a temporary containing the string length to pass to the function if you will need the value afterwards.

    •   "bytes_from_utf8"

        "bytes_from_utf8" also converts a potentially UTF-8 encoded string "s" to bytes. It preserves "s", allocating new memory for the converted string.

        In contrast to the other functions, the input string to this one need not be UTF-8. If not, the caller has set *is_utf8p to be "false", and the function does nothing, returning the original "s".

        Also do nothing if there are code points in the string not expressible in native byte encoding, returning the original "s".

        Otherwise, *is_utf8p is set to 0, and the return value is a pointer to a newly created string containing the native byte equivalent of "s", and whose length is returned in *lenp, updated. The new string is "NUL"-terminated. The caller is responsible for arranging for the memory used by this string to get freed.

        The major problem with this function is that memory is allocated and filled even when the input string was already in bytes form.

    New code should use the first three functions listed above.

     bool       utf8_to_bytes_overwrite(      U8 **s_ptr,
                                              STRLEN *lenp)
     bool  Perl_utf8_to_bytes_overwrite(pTHX_ U8 **s_ptr,
                                              STRLEN *lenp)
     bool       utf8_to_bytes_new_pv   (      U8 const **s_ptr,
                                              STRLEN *lenp,
                                              void **free_me)
     bool  Perl_utf8_to_bytes_new_pv   (pTHX_ U8 const **s_ptr,
                                              STRLEN *lenp,
                                              void **free_me)
     bool       utf8_to_bytes_temp_pv  (      U8 const **s_ptr,
                                              STRLEN *lenp)
     bool  Perl_utf8_to_bytes_temp_pv  (pTHX_ U8 const **s_ptr,
                                              STRLEN *lenp)
     U8 *       utf8_to_bytes          (      U8 *s, STRLEN *lenp)
     U8 *  Perl_utf8_to_bytes          (pTHX_ U8 *s, STRLEN *lenp)
     U8 *       bytes_from_utf8        (      const U8 *s,
                                              STRLEN *lenp,
                                              bool *is_utf8p)
     U8 *  Perl_bytes_from_utf8        (pTHX_ const U8 *s,
                                              STRLEN *lenp,
                                              bool *is_utf8p)

"utf8_to_uv"
"extended_utf8_to_uv"
"strict_utf8_to_uv"
"c9strict_utf8_to_uv"
"utf8_to_uv_or_die"
"utf8_to_uvchr_buf"
"utf8_to_uvchr"
    "DEPRECATED!" It is planned to remove "utf8_to_uvchr" from a future release of Perl. Do not use it for new code; remove it from existing code.

    These functions each translate from UTF-8 to UTF-32 (or UTF-64 on 64 bit platforms). In other words, to a code point ordinal value. (On EBCDIC platforms, the initial encoding is UTF-EBCDIC, and the output is a native code point).

    For example, the string "A" would be converted to the number 65 on an ASCII platform, and to 193 on an EBCDIC one. Converting the string "ABC" would yield the same results, as the functions stop after the first character converted. Converting the string "\N{LATIN CAPITAL LETTER A WITH MACRON} plus anything more in the string" would yield the number 0x100 on both types of platforms, since the first character is U+0100.

    The functions whose names contain "to_uvchr" are older than the functions whose names don't have "chr" in them. The API in the older functions is harder to use correctly, and so they are kept only for backwards compatibility, and may eventually become deprecated. If you are writing a module and use Devel::PPPort, your code can use the new functions back to at least Perl v5.7.1.

    All the functions accept, without complaint, well-formed UTF-8 for any non-problematic Unicode code point 0 .. 0x10FFFF. There are two types of Unicode problematic code points: surrogate characters and non-character code points. (See perlunicode.) Some of the functions reject one or both of these. Private use characters and those code points yet to be assigned to a particular character are never considered problematic. Additionally, most of the functions accept non-Unicode code points, those starting at 0x110000.

    There are two sets of these functions:

    "utf8_to_uv" forms
        Almost all code should use only "utf8_to_uv", "extended_utf8_to_uv", "strict_utf8_to_uv", "c9strict_utf8_to_uv", or "utf8_to_uv_or_die". The other functions are either the problematic old form, or are for specialized uses.

        "utf8_to_uv_or_die" has a simpler interface than the other four, for use when any errors encountered should be fatal. It throws an exception with any errors found, otherwise it returns the code point the input sequence represents.

        The other four functions each return "true" if the sequence of bytes starting at "s" form a complete, legal UTF-8 (or UTF-EBCDIC) sequence for a code point; or false otherwise. They take an extra parameter, the address of an IV, &cp. *cp will be set to the native code point value the sequence represents, and *advance will be set to its length, in bytes.

        If the functions returns "false", *cp is set to the Unicode REPLACEMENT CHARACTER, and *advance to the next position along "s", where the next possible UTF-8 character could begin. Failing to use this position as the next starting point during parsing of strings has led to successful attacks by crafted inputs.

        The functions only examine as many bytes along "s" as are needed to form a complete UTF-8 representation of a single code point; they never examine the byte at "e", or beyond. They return false (or die in the case of "utf8_to_uv_or_die") if the code point requires more than "e - s" bytes to represent.

        The functions differ only in what flavor of UTF-8 they accept. All reject syntactically invalid UTF-8.

        •   "strict_utf8_to_uv"

            additionally rejects any UTF-8 that translates into a code point that isn't specified by Unicode to be freely exchangeable, namely the surrogate characters and non-character code points (besides non-Unicode code points, any above 0x10FFFF). It does not raise a warning when rejecting these.

        •   "c9strict_utf8_to_uv"

            instead uses the exchangeable definition given by Unicode's Corregendum #9, which accepts non-character code points while still rejecting surrogates. It does not raise a warning when rejecting these.

        •   "utf8_to_uv"

        •   "utf8_to_uv_or die"

            accept all syntactically valid UTF-8, as extended by Perl to allow 64-bit code points to be encoded.

            "extended_utf8_to_uv" is merely a synonym for "utf8_to_uv". Use this form to draw attention to the fact that it accepts any code point. But since Perl programs traditionally do this by default, plain "utf8_to_uv" is the form most often used.

        Whenever syntactically invalid input is rejected, an explanatory warning message is raised, unless "utf8" warnings (or the appropriate subcategory) are turned off. A given input sequence may contain multiple malformations, giving rise to multiple warnings, as the functions attempt to find and report on all malformations in a sequence. All the possible malformations are listed in "utf8_to_uv_msgs", with some examples of multiple ones for the same sequence. You can use that function or "utf8_to_uv_flags" to exert more control over the input that is considered acceptable, and the warnings that are raised.

        Often, "s" is an arbitrarily long string containing the UTF-8 representations of many code points in a row, and these functions are called in the course of parsing "s" to find all those code points.

        If your code doesn't know how to deal with illegal input, as would be typical of a low level routine, the loop could look like:

         while (s < e) {
             Size_t advance;
             UV cp;
             (void) utf8_to_uv(s, e, &cp, &advance);
             <handle 'cp'>
             s += advance;
         }

        A REPLACEMENT CHARACTER will be inserted everywhere that malformed input occurs. Obviously, we aren't expecting such outcomes, but your code will be protected from attacks and many harmful effects that could otherwise occur.

        If the situation is such that it would be a bug for the input to be invalid, a somewhat simpler loop suffices:

         while (s < e) {
             Size_t advance;
             UV cp = utf8_to_uv_or_die(s, e, &advance);
             <handle 'cp'>
             s += advance;
         }

        This will throw an exception on invalid input, so your code doesn't have to concern itself with that possibility.

        If you do have a plan for handling malformed input, you could instead write:

         while (s < e) {
             Size_t advance;
             UV cp;

             if (UNLIKELY(! utf8_to_uv(s, e, &cp, &advance)) {
                 <bail out or convert to handleable>
             }

             <handle 'cp'>

             s += advance;
         }

        You may pass NULL to these functions instead of a pointer to your "advance" variable. But the only legitimate case to do this is if you are only examining the first character in "s", and have no plans to ever look further. You could also advance by using "UTF8SKIP", but this gives the correct result if and only if the input is well-formed; and this practice has led to successful attacks against such code; and it is extra work always, as the functions have already done the equivalent work and return the correct value in "advance", regardless of whether the input is well-formed or not.

        Except with "utf8_to_uv_or_die", you must always pass a non-NULL pointer into which to store the (first) code point "s" represents. If you don't care about this value, you should be using one of the "isUTF8_CHAR" functions instead.

    "utf8_to_uvchr" forms
        These are the old form equivalents of "utf8_to_uv" (and its synonym, "extended_utf8_to_uv"). They are "utf8_to_uvchr" and "utf8_to_uvchr_buf". There is no old form equivalent of either "strict_utf8_to_uv" nor "c9strict_utf8_to_uv".

        "utf8_to_uvchr" is DEPRECATED. Do NOT use it; it is a security hole ready to bring destruction onto you and yours.

        "utf8_to_uvchr_buf" is discouraged and may eventually become deprecated. It checks if the sequence of bytes starting at "s" form a complete, legal UTF-8 (or UTF-EBCDIC) sequence for a code point. If so, it returns the code point value the sequence represents, and *retlen will be set to its length, in bytes. Thus, the next possible character in "s" begins at "s + *retlen".

        The function only examines as many bytes along "s" as are needed to form a complete UTF-8 representation of a single code point, but it never examines the byte at "e", or beyond.

        If the sequence examined starting at "s" is not legal Perl extended UTF-8, the translation fails, and the resultant behavior unfortunately depends on if the warnings category "utf8" is enabled or not.

        If 'utf8' warnings are disabled
            The Unicode REPLACEMENT CHARACTER is silently returned, and *retlen is set (if "retlen" isn't "NULL") so that ("s" + *retlen) is the next possible position in "s" that could begin a non-malformed character.

            But note that it is ambiguous whether a REPLACEMENT CHARACTER was actually in the input, or if this function synthetically generated one. In the unlikely event that you care, you'd have to examine the input to disambiguate.

        If 'utf8' warnings are enabled
            A warning will be displayed, and 0 is returned and *retlen is set (if "retlen" isn't "NULL") to -1.

            But note that 0 may also be returned if *s is a legal NUL character. This means that you have to disambiguate a 0 return. You can do this by checking that the first byte of "s" is indeed a NUL; or by making sure to always pass a non-NULL "retlen" pointer, and by examining it.

            Also note that should you wish to proceed with parsing "s", you have no easy way of knowing where to start looking in it for the next possible character. It is important to look in the right place to prevent attacks on your code. It would be better to have instead called an equivalent function that provides this information; any of the "utf8_to_uv" series, or "utf8n_to_uvchr".

        Because of these quirks, "utf8_to_uvchr_buf" is very difficult to use correctly and handle all cases. Generally, you need to bail out at the first failure it finds.

        The deprecated "utf8_to_uvchr" behaves the same way as "utf8_to_uvchr_buf" for well-formed input, and for the malformations it is capable of finding, but doesn't find all of them, and it can read beyond the end of the input buffer, which is why it is deprecated.

    The utf8_to_uv() family of functions is preferred because they make it easier to write code safe from attacks. You should be converting to them; this will result in simpler, more robust code.

     bool       utf8_to_uv         (      const U8 * const s,
                                          const U8 * const e,
                                          UV *cp_p, Size_t *advance_p)
     bool  Perl_utf8_to_uv         (      const U8 * const s,
                                          const U8 * const e,
                                          UV *cp_p, Size_t *advance_p)
     bool       extended_utf8_to_uv(      const U8 * const s,
                                          const U8 * const e,
                                          UV *cp_p, Size_t *advance_p)
     bool  Perl_extended_utf8_to_uv(      const U8 * const s,
                                          const U8 * const e,
                                          UV *cp_p, Size_t *advance_p)
     bool       strict_utf8_to_uv  (      const U8 * const s,
                                          const U8 * const e,
                                          UV *cp_p, Size_t *advance_p)
     bool  Perl_strict_utf8_to_uv  (      const U8 * const s,
                                          const U8 * const e,
                                          UV *cp_p, Size_t *advance_p)
     bool       c9strict_utf8_to_uv(      const U8 * const s,
                                          const U8 * const e,
                                          UV *cp_p, Size_t *advance_p)
     bool  Perl_c9strict_utf8_to_uv(      const U8 * const s,
                                          const U8 * const e,
                                          UV *cp_p, Size_t *advance_p)
     UV         utf8_to_uv_or_die  (      const U8 * const s,
                                          const U8 *e,
                                          Size_t *advance_p)
     UV    Perl_utf8_to_uv_or_die  (      const U8 * const s,
                                          const U8 *e,
                                          Size_t *advance_p)
     UV         utf8_to_uvchr_buf  (      const U8 *s, const U8 *send,
                                          STRLEN *retlen)
     UV    Perl_utf8_to_uvchr_buf  (pTHX_ const U8 *s, const U8 *send,
                                          STRLEN *retlen)
     UV         utf8_to_uvchr      (      const U8 *s, STRLEN *retlen)
     UV    Perl_utf8_to_uvchr      (pTHX_ const U8 *s, STRLEN *retlen)

"utf8_to_uv_errors*"
    Described under "utf8_to_uv_msgs"

"utf8_to_uv_flags"
"utf8n_to_uvchr"
    These functions are extensions of "utf8_to_uv", where you need more control over what UTF-8 sequences are acceptable. These functions are unlikely to be needed except for specialized purposes.

    "utf8n_to_uvchr" is more like an extension of "utf8_to_uvchr_buf", but with fewer quirks, and a different method of specifying the bytes in "s" it is allowed to examine. It has a "curlen" parameter instead of an "e" parameter, so the furthest byte in "s" it can look at is "s + curlen - 1". Its return value is, like "utf8_to_uvchr_buf", ambiguous with respect to the NUL and REPLACEMENT characters, but the value of *retlen can be relied on (except with the "UTF8_CHECK_ONLY" flag described below) to know where the next possible character along "s" starts, removing that quirk. Hence, you always should use *retlen to determine where the next character in "s" starts.

    These functions have an additional parameter, "flags", besides the ones in "utf8_to_uv" and "utf8_to_uvchr_buf", which can be used to broaden or restrict what is acceptable UTF-8. "flags" has the same meaning and behavior in both functions. When "flags" is 0, these functions accept any syntactically valid Perl-extended-UTF-8 sequence that doesn't overflow the platform's word size.

    There are flags that apply to accepting particular sequences, and flags that apply to raising warnings about encountering sequences. Each type is independent of the other. You can reject and not warn; warn and still accept; or both reject and warn. Rejecting means that the sequence gets translated into the Unicode REPLACEMENT CHARACTER instead of what it was meant to represent.

    Unless otherwise stated below, warnings are subject to the "utf8" warnings category being on.

    "UTF8_CHECK_ONLY"
        This suppresses any warnings. And it changes what is stored into *retlen with the "uvchr" family of functions (for the worse). It is not likely to be of use to you. You can use "UTF8_ALLOW_ANY" (described below) to also turn off warnings, and that flag doesn't adversely affect *retlen.

        This flag is ignored if "UTF8_DIE_IF_MALFORMED" is also set.

    "UTF8_FORCE_WARN_IF_MALFORMED"
        Normally, no warnings are generated if warnings are turned off lexically or globally, regardless of any flags to the contrary. But this flag effectively turns on warnings temporarily for the duration of this function's execution.

        Do not use it lightly.

        This flag is ignored if "UTF8_CHECK_ONLY" is also set.

    "UTF8_DISALLOW_SURROGATE"
    "UTF8_WARN_SURROGATE"
        These reject and/or warn about UTF-8 sequences that represent surrogate characters. The warning categories "utf8" and "non_unicode" control if warnings are actually raised.

    "UTF8_DISALLOW_NONCHAR"
    "UTF8_WARN_NONCHAR"
        These reject and/or warn about UTF-8 sequences that represent non-character code points. The warning categories "utf8" and "nonchar" control if warnings are actually raised.

    "UTF8_DISALLOW_SUPER"
    "UTF8_WARN_SUPER"
        These reject and/or warn about UTF-8 sequences that represent code points above 0x10FFFF. The warning categories "utf8" and "non_unicode" control if warnings are actually raised.

    "UTF8_DISALLOW_ILLEGAL_INTERCHANGE"
    "UTF8_WARN_ILLEGAL_INTERCHANGE"
        These are the same as having selected all three of the corresponding SURROGATE, NONCHAR and SUPER flags listed above.

        All such code points are not considered to be safely freely exchangeable between processes.

    "UTF8_DISALLOW_ILLEGAL_C9_INTERCHANGE"
    "UTF8_WARN_ILLEGAL_C9_INTERCHANGE"
        These are the same as having selected both the corresponding SURROGATE and SUPER flags listed above.

        Unicode issued Unicode Corrigendum #9 <https://www.unicode.org/versions/corrigendum9.html> to allow non-character code points to be exchanged by processes aware of the possibility. (They are still discouraged, however.) For more discussion see "Noncharacter code points" in perlunicode.

    "UTF8_DISALLOW_PERL_EXTENDED"
    "UTF8_WARN_PERL_EXTENDED"
        These reject and/or warn on encountering sequences that require Perl's extension to UTF-8 to represent them. These are all for code points above 0x10FFFF, so these sequences are a subset of the ones controlled by SUPER or either of the illegal interchange sets of flags. The warning categories "utf8", "non_unicode", and "portable" control if warnings are actually raised.

        Perl predates Unicode, and earlier standards allowed for code points up through 0x7FFF_FFFF (2**31 - 1). Perl, of course, would like you to be able to represent in UTF-8 any code point available on the platform. To do so, some extension must be used to express them. Perl uses a natural extension to UTF-8 to represent the ones up to 2**36-1, and invented a further extension to represent even higher ones, so that any code point that fits in a 64-bit word can be represented. We lump both of these extensions together and refer to them as Perl extended UTF-8. There exist other extensions that people have invented, incompatible with Perl's.

        On EBCDIC platforms starting in Perl v5.24, the Perl extension for representing extremely high code points kicks in at 0x3FFF_FFFF (2**30 -1), which is lower than on ASCII. Prior to that, code points 2**31 and higher were simply unrepresentable, and a different, incompatible method was used to represent code points between 2**30 and 2**31 - 1.

        It is likely that programs written in something other than Perl would not be able to read files that contain these; nor would Perl understand files written by something that uses a different extension. Hence, you can specify that above-Unicode code points are generally accepted and/or warned about, but still exclude the ones that require this extension to represent.

    "UTF8_ALLOW_ANY" and kin
        Other flags can be passed to allow, in a limited way, syntactic malformations and/or overflowing the number of bits available in a UV on the platform. The functions will not treat the relevant malformations as errors, hence will not raise any warnings for them. "utf8_to_uv_msgs" will return "true".

        However, all such malformations translate to the REPLACEMENT CHARACTER, regardless of any of the flags.

        The only such flag that you would ever have any reason to use is "UTF8_ALLOW_ANY" which applies to any of the syntactic malformations and overflow, except for empty input. The other flags are analogous to ones in the "_GOT_" bits list in "utf8_to_uv_msgs".

    "UTF8_DIE_IF_MALFORMED"
        If the function would otherwise return "false", it instead croaks. The "UTF8_FORCE_WARN_IF_MALFORMED" flag is effectively turned on so that the cause of the croak is displayed.

     bool       utf8_to_uv_flags(const U8 * const s,
                                 const U8 * const e, UV *cp_p,
                                 Size_t *advance_p, U32 flags)
     bool  Perl_utf8_to_uv_flags(const U8 * const s,
                                 const U8 * const e, UV *cp_p,
                                 Size_t *advance_p, U32 flags)
     UV         utf8n_to_uvchr  (const U8 *s, STRLEN curlen,
                                 STRLEN *retlen, const U32 flags)
     UV    Perl_utf8n_to_uvchr  (const U8 *s, STRLEN curlen,
                                 STRLEN *retlen, const U32 flags)

"utf8_to_uv_msgs"
"utf8n_to_uvchr_msgs"
"utf8_to_uv_errors"
"utf8n_to_uvchr_error"
    These functions are extensions of "utf8_to_uv_flags" and "utf8n_to_uvchr". They are used for the highly specialized purpose of when the caller needs to know the exact malformations that were encountered and/or the diagnostics that would be raised.

    They each take one or two extra parameters, pointers to where to store this information. The functions with "_msgs" in their names return both types, so take two extra parameters; those with "_error" return just the malformations, so take just one extra parameter. When the extra parameters are both 0, the functions behave identically to the function they extend.

    When the "errors" parameter is not NULL, it should be the address of a U32 variable, into which the functions store a bitmap, described just below, with a bit set for each malformation the function found; 0 if none. The "ALLOW"-type flags are ignored when determining the content of this variable. That is, even if you "allow" a particular malformation, if it is encountered, the corresponding bit will be set to notify you that one was encountered. However, the bits for conditions that are accepted by default aren't set unless the flags passed to the function indicate that they should be rejected or warned about when encountering them. These are explicitly noted in the list below along with the controlling flags.

    The bits returned in "errors" and their meanings are:

    "UTF8_GOT_CONTINUATION"
        The input sequence was malformed in that the first byte was a UTF-8 continuation byte.

    "UTF8_GOT_EMPTY"
        The input parameters indicated the length of "s" is 0. Technically, this a coding error, not a malformation; you should check before calling these functions if there is actually anything to convert. But perl needs to be able to recover from bad input, and this is how it does it.

    "UTF8_GOT_LONG"
        The input sequence was malformed in that there is some other sequence that evaluates to the same code point, but that sequence is shorter than this one.

        Until Unicode 3.1, it was legal for programs to accept this malformation, but it was discovered that this created security issues.

    "UTF8_GOT_NONCHAR"
        The code point represented by the input UTF-8 sequence is for a Unicode non-character code point. This bit is set only if the input "flags" parameter contains either the "UTF8_DISALLOW_NONCHAR" or the "UTF8_WARN_NONCHAR" flags.

    "UTF8_GOT_NON_CONTINUATION"
        The input sequence was malformed in that a non-continuation-type byte was found in a position where only a continuation-type one should be. See also "UTF8_GOT_SHORT".

    "UTF8_GOT_OVERFLOW"
        The input sequence was malformed in that it is for a code point that is not representable in the number of bits available in an IV on the current platform.

    "UTF8_GOT_PERL_EXTENDED"
        The input sequence is not standard UTF-8, but a Perl extension. This bit is set only if the input "flags" parameter contains either the "UTF8_DISALLOW_PERL_EXTENDED" or the "UTF8_WARN_PERL_EXTENDED" flags.

    "UTF8_GOT_SHORT"
        The input sequence was malformed in that "curlen" is smaller than required for a complete sequence. In other words, the input is for a partial character sequence.

        "UTF8_GOT_SHORT" and "UTF8_GOT_NON_CONTINUATION" both indicate a too short sequence. The difference is that "UTF8_GOT_NON_CONTINUATION" indicates always that there is an error, while "UTF8_GOT_SHORT" means that an incomplete sequence was looked at. If no other flags are present, it means that the sequence was valid as far as it went. Depending on the application, this could mean one of three things:

        •   The "e" or "curlen" parameters passed in were too small, and the function was prevented from examining all the necessary bytes.

        •   The buffer being looked at is based on reading data, and the data received so far stopped in the middle of a character, so that the next read will read the remainder of this character. (It is up to the caller to deal with the split bytes somehow.)

        •   This is a real error, and the partial sequence is all we're going to get.

    "UTF8_GOT_SUPER"
        The input sequence was malformed in that it is for a non-Unicode code point; that is, one above the legal Unicode maximum. This bit is set only if the input "flags" parameter contains either the "UTF8_DISALLOW_SUPER" or the "UTF8_WARN_SUPER" flags.

    "UTF8_GOT_SURROGATE"
        The input sequence was malformed in that it is for a Unicode UTF-16 surrogate code point. This bit is set only if the input "flags" parameter contains either the "UTF8_DISALLOW_SURROGATE" or the "UTF8_WARN_SURROGATE" flags.

    Note that more than one bit may have been set by these functions. This is because it is possible for multiple malformations to be present in the same sequence. An example would be an overlong sequence evaluating to a surrogate when surrogates are forbidden. Another example is overflow; standard UTF-8 never overflows, so something that does must have been expressed using Perl's extended UTF-8. It also is above all legal Unicode code points. So there will be a bit set for up to all three of these things. 1) Overflow always; 2) perl-extended if the calling flags indicate those should be rejected or warned about; and 3) above-Unicode, provided the calling flags indicate those should be rejected or warned about.

    If you don't care about the system's messages text nor warning categories, you can customize error handling by calling one of the "_error" functions, using either of the flags "UTF8_ALLOW_ANY" or "UTF8_CHECK_ONLY" to suppress any warnings, and then examine the *errors return. If you don't use those flags, warnings will be raised as usual.

    But if you do care, instead use one of the functions with "_msgs" in their names. These allow you to completely customize error handling by suppressing any warnings that would otherwise be raised; instead returning all relevant information in a structure specified by an extra parameter, "msgs", a pointer to a variable which has been declared to be an "AV*", and into which the function creates a new AV to store information, described below, about all the malformations that were encountered.

    When this parameter is non-NULL, the "UTF8_DIE_IF_MALFORMED" and "UTF8_FORCE_WARN_IF_MALFORMED" flags are asserted against in DEBUGGING builds, and are ignored in non-DEBUGGING ones. The "UTF8_CHECK_ONLY" flag is always ignored.

    What is considered a malformation is affected by "flags", the same as described in "utf8_to_uv_flags". No array element is generated for malformations that are "allowed" by the input flags, in contrast to the bitmap returned in a non-NULL *errors.

    Each element of the "msgs" AV array is an anonymous hash with the following three key-value pairs:

    "text"
        A "SVpv" containing the text of the message about the problematic input. This text is identical to any warning that otherwise would have been raised if the appropriate warning categories were enabled.

    "warn_categories"
        This is 0 if the "flags" parameter to the function would ordinarily not have caused the message to be output as a warning; otherwise it is the warning category (or categories) that would have been used to generate a warning for "text", packed into a "SVuv". For example, if "flags" contains "UTF8_DISALLOW_SURROGATE", but not "UTF8_WARN_SURROGATE", this would be 0 if the input was a surrogate.

    "flag"
        A "SVuv" containing a single flag bit associated with this message. The bit corresponds to some bit in the *errors return value, such as "UTF8_GOT_LONG".

    The array is sorted so that element "[0]" contains the first message that would have otherwise been raised; "[1]", the second; and so on.

    You thus can completely override the normal error handling; you can check the lexical warnings state (or not) when choosing what to do with the returned messages.

    The caller, of course, is responsible for freeing any returned AV.

     bool       utf8_to_uv_msgs     (const U8 * const s0, const U8 *e,
                                     UV *cp_p, Size_t *advance_p,
                                     U32 flags, U32 *errors,
                                     AV **msgs)
     bool  Perl_utf8_to_uv_msgs     (const U8 * const s0, const U8 *e,
                                     UV *cp_p, Size_t *advance_p,
                                     U32 flags, U32 *errors,
                                     AV **msgs)
     UV         utf8n_to_uvchr_msgs (const U8 * const s0,
                                     STRLEN curlen, STRLEN *retlen,
                                     const U32 flags, U32 *errors,
                                     AV **msgs)
     UV    Perl_utf8n_to_uvchr_msgs (const U8 * const s0,
                                     STRLEN curlen, STRLEN *retlen,
                                     const U32 flags, U32 *errors,
                                     AV **msgs)
     bool       utf8_to_uv_errors   (const U8 * const s,
                                     const U8 * const e, UV *cp_p,
                                     Size_t *advance_p, U32 flags,
                                     U32 *errors)
     bool  Perl_utf8_to_uv_errors   (const U8 * const s,
                                     const U8 * const e, UV *cp_p,
                                     Size_t *advance_p, U32 flags,
                                     U32 *errors)
     UV         utf8n_to_uvchr_error(const U8 *s, STRLEN curlen,
                                     STRLEN *retlen, const U32 flags,
                                     U32 *errors)
     UV    Perl_utf8n_to_uvchr_error(const U8 *s, STRLEN curlen,
                                     STRLEN *retlen, const U32 flags,
                                     U32 *errors)

"utf8_to_uv_or_die*"
"utf8_to_uvchr*"
"utf8_to_uvchr_buf*"
    Described under "utf8_to_uv"

"utf8n_to_uvchr*"
    Described under "utf8_to_uv_flags"

"utf8ness_t"
    This typedef is used by several core functions that return PV strings, to indicate the UTF-8ness of those strings.

    (If you write a new function, you probably should instead return the PV in an SV with the UTF-8 flag of the SV properly set, rather than use this mechanism.)

    The possible values this can be are:

    "UTF8NESS_YES"
        This means the string definitely should be treated as a sequence of UTF-8-encoded characters.

        Most code that needs to handle this typedef should be of the form:

         if (utf8ness_flag == UTF8NESS_YES) {
             treat as utf8;  // like turning on an SV UTF-8 flag
         }

    "UTF8NESS_NO"
        This means the string definitely should be treated as a sequence of bytes, not encoded as UTF-8.

    "UTF8NESS_IMMATERIAL"
        This means it is equally valid to treat the string as bytes, or as UTF-8 characters; use whichever way you want. This happens when the string consists entirely of characters which have the same representation whether encoded in UTF-8 or not.

    "UTF8NESS_UNKNOWN"
        This means it is unknown how the string should be treated. No core function will ever return this value to a non-core caller. Instead, it is used by the caller to initialize a variable to a non-legal value. A typical call will look like:

         utf8ness_t string_is_utf8 = UTF8NESS_UNKNOWN
         const char * string = foo(arg1, arg2, ..., &string_is_utf8);
         if (string_is_utf8 == UTF8NESS_YES) {
            do something for UTF-8;
         }

    The following relationships hold between the enum values:

    "0 <= enum value <= UTF8NESS_IMMATERIAL"
        the string may be treated in code as non-UTF8

    "UTF8NESS_IMMATERIAL <= <enum value"
        the string may be treated in code as encoded in UTF-8

"UTF8SKIP"
"UTF8_SKIP"
"UTF8_CHK_SKIP"
"UTF8_SAFE_SKIP"
    Each of these returns the number of bytes in the UTF-8 encoded character whose first (perhaps only) byte is pointed to by "s".

    "UTF8SKIP" and "UTF8_SKIP" are synonyms. Use them when there is no possibility that the character pointed to by "s" is malformed.

    If there is a possibility of malformed input, use instead:

    "UTF8_SAFE_SKIP" if you know the maximum ending pointer in the buffer pointed to by "s"
        If the buffer has enough bytes to hold the character, it returns the same value as "UTF8SKIP" and "UTF8_SKIP" would. If the buffer has fewer bytes than can fit, it returns the number of bytes available in the buffer, which could be 0 if "s >= e". On DEBUGGING builds, it asserts that "s <= e".

    "UTF8_CHK_SKIP" if you don't know the maximum ending pointer
        This version doesn't blindly assume that the input string pointed to by "s" is well-formed, but verifies that there isn't a NUL terminating character before the expected end of the next character in "s". The length "UTF8_CHK_SKIP" returns stops just before any such NUL.

        Perl tends to add NULs, as an insurance policy, after the end of strings in SV's, so it is likely that using this macro on an SV string will prevent inadvertent reading beyond the end of the input buffer, even if it is malformed UTF-8.

        This macro is intended to be used by XS modules where the inputs could be malformed, and it isn't feasible to restructure to use the safer "UTF8_SAFE_SKIP", for example when interfacing with a C library.

     STRLEN  UTF8SKIP      (const char* s)
     STRLEN  UTF8_SKIP     (const char* s)
     STRLEN  UTF8_CHK_SKIP (const char* s)
     STRLEN  UTF8_SAFE_SKIP(const char* s, const char* e)

"uv_to_utf8"
"uv_to_utf8_flags"
"uvchr_to_utf8"
"uvchr_to_utf8_flags"
    These each add the UTF-8 representation of the native code point "uv" to the end of the string "d"; "d" should have at least "UVCHR_SKIP(uv)+1" (up to "UTF8_MAXBYTES+1") free bytes available. The return value is the pointer to the byte after the end of the new character. In other words,

        d = uv_to_utf8(d, uv);

    This is the Unicode-aware way of saying

        *(d++) = uv;

    ("uvchr_to_utf8" is a synonym for "uv_to_utf8".)

    "uv_to_utf8_flags" is used to make some classes of code points problematic in some way. "uv_to_utf8" is effectively the same as calling "uv_to_utf8_flags" with "flags" set to 0, meaning no class of code point is considered problematic. That means any input code point from 0.."IV_MAX" is considered to be fine. "IV_MAX" is typically 0x7FFF_FFFF in a 32-bit word.

    ("uvchr_to_utf8_flags" is a synonym for "uv_to_utf8_flags").

    A code point can be problematic in one of two ways. Its use could just raise a warning, and/or it could be forbidden with the function failing, and returning NULL.

    The potential classes of problematic code points and the flags that make them so are:

    If "uv" is a Unicode surrogate code point and "UNICODE_WARN_SURROGATE" is set, the function will raise a warning, provided UTF8 warnings are enabled. If instead "UNICODE_DISALLOW_SURROGATE" is set, the function will fail and return NULL. If both flags are set, the function will both warn and return NULL.

    Similarly, the "UNICODE_WARN_NONCHAR" and "UNICODE_DISALLOW_NONCHAR" flags affect how the function handles a Unicode non-character.

    And likewise, the "UNICODE_WARN_SUPER" and "UNICODE_DISALLOW_SUPER" flags affect the handling of code points that are above the Unicode maximum of 0x10FFFF. Languages other than Perl may not be able to accept files that contain these.

    The flag "UNICODE_WARN_ILLEGAL_INTERCHANGE" selects all three of the above WARN flags; and "UNICODE_DISALLOW_ILLEGAL_INTERCHANGE" selects all three DISALLOW flags. "UNICODE_DISALLOW_ILLEGAL_INTERCHANGE" restricts the allowed inputs to the strict UTF-8 traditionally defined by Unicode. Similarly, "UNICODE_WARN_ILLEGAL_C9_INTERCHANGE" and "UNICODE_DISALLOW_ILLEGAL_C9_INTERCHANGE" are shortcuts to select the above-Unicode and surrogate flags, but not the non-character ones, as defined in Unicode Corrigendum #9 <https://www.unicode.org/versions/corrigendum9.html>. See "Noncharacter code points" in perlunicode.

    Extremely high code points were never specified in any standard, and require an extension to UTF-8 to express, which Perl does. It is likely that programs written in something other than Perl would not be able to read files that contain these; nor would Perl understand files written by something that uses a different extension. For these reasons, there is a separate set of flags that can warn and/or disallow these extremely high code points, even if other above-Unicode ones are accepted. They are the "UNICODE_WARN_PERL_EXTENDED" and "UNICODE_DISALLOW_PERL_EXTENDED" flags. For more information see "UTF8_GOT_PERL_EXTENDED". Of course "UNICODE_DISALLOW_SUPER" will treat all above-Unicode code points, including these, as malformations. (Note that the Unicode standard considers anything above 0x10FFFF to be illegal, but there are standards predating it that allow up to 0x7FFF_FFFF (2**31 -1))

    A somewhat misleadingly named synonym for "UNICODE_WARN_PERL_EXTENDED" is retained for backward compatibility: "UNICODE_WARN_ABOVE_31_BIT". Similarly, "UNICODE_DISALLOW_ABOVE_31_BIT" is usable instead of the more accurately named "UNICODE_DISALLOW_PERL_EXTENDED". The names are misleading because on EBCDIC platforms,these flags can apply to code points that actually do fit in 31 bits. The new names accurately describe the situation in all cases.

     U8 *       uv_to_utf8         (      U8 *d, UV uv)
     U8 *  Perl_uv_to_utf8         (pTHX_ U8 *d, UV uv)
     U8 *       uv_to_utf8_flags   (      U8 *d, UV uv, UV flags)
     U8 *  Perl_uv_to_utf8_flags   (pTHX_ U8 *d, UV uv, UV flags)
     U8 *       uvchr_to_utf8      (      U8 *d, UV uv)
     U8 *       uvchr_to_utf8_flags(      U8 *d, UV uv, UV flags)

"uv_to_utf8_msgs"
"uvchr_to_utf8_flags_msgs"
    These functions are identical. THEY SHOULD BE USED IN ONLY VERY SPECIALIZED CIRCUMSTANCES.

    Most code should use ""uv_to_utf8_flags"()" rather than call this directly.

    This function is for code that wants any warning and/or error messages to be returned to the caller rather than be displayed. Any message that would have been displayed if all lexical warnings are enabled will instead be returned.

    It is just like "uvchr_to_utf8_flags" but it takes an extra parameter placed after all the others, "msgs". If this parameter is 0, this function behaves identically to "uvchr_to_utf8_flags". Otherwise, "msgs" should be a pointer to an "HV *" variable, in which this function creates a new HV to contain any appropriate message. The hash has three key-value pairs, as follows:

    "text"
        The text of the message as a "SVpv".

    "warn_categories"
        The warning category (or categories) packed into a "SVuv".

    "flag_bit"
        A single flag bit associated with this message, in a "SVuv". The bit corresponds to some bit in the *errors return value. The possibilities are:

        "UNICODE_GOT_SURROGATE"
        "UNICODE_GOT_NONCHAR"
        "UNICODE_GOT_SUPER"
        "UNICODE_GOT_PERL_EXTENDED"

    It's important to note that specifying this parameter as non-null will cause any warning this function would otherwise generate to be suppressed, and instead be placed in *msgs. The caller can check the lexical warnings state (or not) when choosing what to do with the returned message.

    Only a single message is returned; if a code point requires Perl extended UTF-8 to represent, it is also above-Unicode. If either the "UNICODE_WARN_PERL_EXTENDED" or "UNICODE_DISALLOW_PERL_EXTENDED" flags are set, the return is controlled by them; if neither is set, the return is controlled by the "UNICODE_WARN_SUPER" and "UNICODE_DISALLOW_SUPER" flags.

    The caller, of course, is responsible for freeing any returned HV.

     U8 *       uv_to_utf8_msgs         (      U8 *d, UV uv, UV flags,
                                               HV **msgs)
     U8 *  Perl_uv_to_utf8_msgs         (pTHX_ U8 *d, UV uv, UV flags,
                                               HV **msgs)
     U8 *       uvchr_to_utf8_flags_msgs(      U8 *d, UV uv, UV flags,
                                               HV **msgs)

"UVCHR_IS_INVARIANT"
    Evaluates to 1 if the representation of code point "cp" is the same whether or not it is encoded in UTF-8; otherwise evaluates to 0. UTF-8 invariant characters can be copied as-is when converting to/from UTF-8, saving time. "cp" is Unicode if above 255; otherwise is platform-native.

     bool  UVCHR_IS_INVARIANT(UV cp)

"UVCHR_SKIP"
    returns the number of bytes required to represent the code point "cp" when encoded as UTF-8. "cp" is a native (ASCII or EBCDIC) code point if less than 255; a Unicode code point otherwise.

     STRLEN  UVCHR_SKIP(UV cp)

"uvchr_to_utf8*"
"uvchr_to_utf8_flags*"
    Described under "uv_to_utf8"

"uvchr_to_utf8_flags_msgs*"
    Described under "uv_to_utf8_msgs"

Utility Functions

"C_ARRAY_END"
    Returns a pointer to one element past the final element of the input C array.

     void *  C_ARRAY_END(void *a)

"C_ARRAY_LENGTH"
    Returns the number of elements in the input C array (so you want your zero-based indices to be less than but not equal to).

     STRLEN  C_ARRAY_LENGTH(void *a)

"getcwd_sv"
    Fill "sv" with current working directory

     int       getcwd_sv(      SV *sv)
     int  Perl_getcwd_sv(pTHX_ SV *sv)

"IN_PERL_COMPILETIME"
    Returns 1 if this macro is being called during the compilation phase of the program; otherwise 0;

     bool  IN_PERL_COMPILETIME

"IN_PERL_RUNTIME"
    Returns 1 if this macro is being called during the execution phase of the program; otherwise 0;

     bool  IN_PERL_RUNTIME

"IS_SAFE_SYSCALL"
    Same as "is_safe_syscall".

     bool  IS_SAFE_SYSCALL(const char *pv, STRLEN len,
                           const char *what, const char *op_name)

"is_safe_syscall"
    Test that the given "pv" (with length "len") doesn't contain any internal "NUL" characters. If it does, set "errno" to "ENOENT", optionally warn using the "syscalls" category, and return FALSE.

    Return TRUE if the name is safe.

    "what" and "op_name" are used in any warning.

    Used by the IS_SAFE_SYSCALL() macro.

     bool       is_safe_syscall(      const char *pv, STRLEN len,
                                      const char *what,
                                      const char *op_name)
     bool  Perl_is_safe_syscall(pTHX_ const char *pv, STRLEN len,
                                      const char *what,
                                      const char *op_name)

"my_setenv"
    A wrapper for the C library setenv(3). Don't use the latter, as the perl version has desirable safeguards

     void       my_setenv(      const char *nam, const char *val)
     void  Perl_my_setenv(pTHX_ const char *nam, const char *val)

"newPADxVOP"
    Constructs, checks and returns an op containing a pad offset. "type" is the opcode, which should be one of "OP_PADSV", "OP_PADAV", "OP_PADHV" or "OP_PADCV". The returned op will have the "op_targ" field set by the "padix" argument.

    This is convenient when constructing a large optree in nested function calls, as it avoids needing to store the pad op directly to set the "op_targ" field as a side-effect. For example

        o = op_append_elem(OP_LINESEQ, o,
            newPADxVOP(OP_PADSV, 0, padix));

     OP *       newPADxVOP(      I32 type, I32 flags, PADOFFSET padix)
     OP *  Perl_newPADxVOP(pTHX_ I32 type, I32 flags, PADOFFSET padix)

"phase_name"
    Returns the given phase's name as a NUL-terminated string.

    For example, to print a stack trace that includes the current interpreter phase you might do:

        const char* phase_name = phase_name(PL_phase);
        mess("This is weird. (Perl phase: %s)", phase_name);

     const char * const  phase_name(enum perl_phase)

"PoisonFree"
"Poison"
    These each call PoisonWith(0xEF) for catching access to freed memory.

     void  PoisonFree(void* dest, int nitems, type)
     void  Poison    (void* dest, int nitems, type)

"PoisonNew"
    PoisonWith(0xAB) for catching access to allocated but uninitialized memory.

     void  PoisonNew(void* dest, int nitems, type)

"PoisonWith"
    Fill up memory with a byte pattern (a byte repeated over and over again) that hopefully catches attempts to access uninitialized memory.

     void  PoisonWith(void* dest, int nitems, type, U8 byte)

"StructCopy"
    This is an architecture-independent macro that does a shallow copy of one structure to another.

     void  StructCopy(type *src, type *dest, type)

"sv_destroyable"
    Dummy routine which reports that object can be destroyed when there is no sharing module present. It ignores its single SV argument, and returns 'true'. Exists to avoid test for a "NULL" function pointer and because it could potentially warn under some level of strict-ness.

     bool       sv_destroyable(      SV *sv)
     bool  Perl_sv_destroyable(pTHX_ SV *sv)

"sv_nosharing"
    Dummy routine which "shares" an SV when there is no sharing module present. Or "locks" it. Or "unlocks" it. In other words, ignores its single SV argument. Exists to avoid test for a "NULL" function pointer and because it could potentially warn under some level of strict-ness.

     void       sv_nosharing(      SV *sv)
     void  Perl_sv_nosharing(pTHX_ SV *sv)

Versioning

"new_version"
    Returns a new version object based on the passed in SV:

        SV *sv = new_version(SV *ver);

    Does not alter the passed in ver SV. See "upg_version" if you want to upgrade the SV.

     SV *       new_version(      SV *ver)
     SV *  Perl_new_version(pTHX_ SV *ver)

"PERL_REVISION"
    "DEPRECATED!" It is planned to remove "PERL_REVISION" from a future release of Perl. Do not use it for new code; remove it from existing code.

    The major number component of the perl interpreter currently being compiled or executing. This has been 5 from 1993 into 2020.

    Instead use one of the version comparison macros. See "PERL_VERSION_EQ".

"PERL_SUBVERSION"
    "DEPRECATED!" It is planned to remove "PERL_SUBVERSION" from a future release of Perl. Do not use it for new code; remove it from existing code.

    The micro number component of the perl interpreter currently being compiled or executing. In stable releases this gives the dot release number for maintenance updates. In development releases this gives a tag for a snapshot of the status at various points in the development cycle.

    Instead use one of the version comparison macros. See "PERL_VERSION_EQ".

"PERL_VERSION"
    "DEPRECATED!" It is planned to remove "PERL_VERSION" from a future release of Perl. Do not use it for new code; remove it from existing code.

    The minor number component of the perl interpreter currently being compiled or executing. Between 1993 into 2020, this has ranged from 0 to 33.

    Instead use one of the version comparison macros. See "PERL_VERSION_EQ".

"PERL_VERSION_EQ"
"PERL_VERSION_GE"
"PERL_VERSION_GT"
"PERL_VERSION_LE"
"PERL_VERSION_LT"
"PERL_VERSION_NE"
    Returns whether or not the perl currently being compiled has the specified relationship to the perl given by the parameters. For example,

     #if PERL_VERSION_GT(5,24,2)
       code that will only be compiled on perls after v5.24.2
     #else
       fallback code
     #endif

    Note that this is usable in making compile-time decisions

    You may use the special value '*' for the final number to mean ALL possible values for it. Thus,

     #if PERL_VERSION_EQ(5,31,'*')

    means all perls in the 5.31 series. And

     #if PERL_VERSION_NE(5,24,'*')

    means all perls EXCEPT 5.24 ones. And

     #if PERL_VERSION_LE(5,9,'*')

    is effectively

     #if PERL_VERSION_LT(5,10,0)

    This means you don't have to think so much when converting from the existing deprecated "PERL_VERSION" to using this macro:

     #if PERL_VERSION <= 9

    becomes

     #if PERL_VERSION_LE(5,9,'*')

     bool  PERL_VERSION_EQ(const U8 major, const U8 minor,
                           const U8 patch)
     bool  PERL_VERSION_GE(const U8 major, const U8 minor,
                           const U8 patch)
     bool  PERL_VERSION_GT(const U8 major, const U8 minor,
                           const U8 patch)
     bool  PERL_VERSION_LE(const U8 major, const U8 minor,
                           const U8 patch)
     bool  PERL_VERSION_LT(const U8 major, const U8 minor,
                           const U8 patch)
     bool  PERL_VERSION_NE(const U8 major, const U8 minor,
                           const U8 patch)

"prescan_version"
    Validate that a given string can be parsed as a version object, but doesn't actually perform the parsing. Can use either strict or lax validation rules. Can optionally set a number of hint variables to save the parsing code some time when tokenizing.

     const char *       prescan_version(      const char *s,
                                              bool strict,
                                              const char **errstr,
                                              bool *sqv,
                                              int *ssaw_decimal,
                                              int *swidth,
                                              bool *salpha)
     const char *  Perl_prescan_version(pTHX_ const char *s,
                                              bool strict,
                                              const char **errstr,
                                              bool *sqv,
                                              int *ssaw_decimal,
                                              int *swidth,
                                              bool *salpha)

"scan_version"
    Returns a pointer to the next character after the parsed version string, as well as upgrading the passed in SV to an RV.

    Function must be called with an already existing SV like

        sv = newSV(0);
        s = scan_version(s, SV *sv, bool qv);

    Performs some preprocessing to the string to ensure that it has the correct characteristics of a version. Flags the object if it contains an underscore (which denotes this is an alpha version). The boolean qv denotes that the version should be interpreted as if it had multiple decimals, even if it doesn't.

     const char *       scan_version(      const char *s, SV *rv,
                                           bool qv)
     const char *  Perl_scan_version(pTHX_ const char *s, SV *rv,
                                           bool qv)

"upg_version"
    In-place upgrade of the supplied SV to a version object.

        SV *sv = upg_version(SV *sv, bool qv);

    Returns a pointer to the upgraded SV. Set the boolean qv if you want to force this SV to be interpreted as an "extended" version.

     SV *       upg_version(      SV *ver, bool qv)
     SV *  Perl_upg_version(pTHX_ SV *ver, bool qv)

"vcmp"
    Version object aware cmp. Both operands must already have been converted into version objects.

     int       vcmp(      SV *lhv, SV *rhv)
     int  Perl_vcmp(pTHX_ SV *lhv, SV *rhv)

"vnormal"
    Accepts a version object and returns the normalized string representation. Call like:

        sv = vnormal(rv);

    NOTE: you can pass either the object directly or the SV contained within the RV.

    The SV returned has a refcount of 1.

     SV *       vnormal(      SV *vs)
     SV *  Perl_vnormal(pTHX_ SV *vs)

"vnumify"
    Accepts a version object and returns the normalized floating point representation. Call like:

        sv = vnumify(rv);

    NOTE: you can pass either the object directly or the SV contained within the RV.

    The SV returned has a refcount of 1.

     SV *       vnumify(      SV *vs)
     SV *  Perl_vnumify(pTHX_ SV *vs)

"vstringify"
    In order to maintain maximum compatibility with earlier versions of Perl, this function will return either the floating point notation or the multiple dotted notation, depending on whether the original version contained 1 or more dots, respectively.

    The SV returned has a refcount of 1.

     SV *       vstringify(      SV *vs)
     SV *  Perl_vstringify(pTHX_ SV *vs)

"vverify"
    Validates that the SV contains valid internal structure for a version object. It may be passed either the version object (RV) or the hash itself (HV). If the structure is valid, it returns the HV. If the structure is invalid, it returns NULL.

        SV *hv = vverify(sv);

    Note that it only confirms the bare minimum structure (so as not to get confused by derived classes which may contain additional hash entries):

    •   The SV is an HV or a reference to an HV

    •   The hash contains a "version" key

    •   The "version" key has a reference to an AV as its value

     SV *       vverify(      SV *vs)
     SV *  Perl_vverify(pTHX_ SV *vs)

Warning and Dieing
In all these calls, the "U32 wn" parameters are warning category constants. You can see the ones currently available in "Category Hierarchy" in warnings, just capitalize all letters in the names and prefix them by "WARN_". So, for example, the category "void" used in a perl program becomes "WARN_VOID" when used in XS code and passed to one of the calls below.

"ck_warner"
"ck_warner_d"
    If none of the warning categories given by "err" are enabled, do nothing; otherwise call "warner" or "warner_nocontext" with the passed-in parameters;.

    "err" must be one of the "packWARN", "packWARN2", "packWARN3", "packWARN4" macros populated with the appropriate number of warning categories.

    The two forms differ only in that "ck_warner_d" should be used if warnings for any of the categories are by default enabled.

     void  Perl_ck_warner  (pTHX_ U32 err, const char *pat, ...)
     void  Perl_ck_warner_d(pTHX_ U32 err, const char *pat, ...)

"ckWARN"
"ckWARN2"
"ckWARN3"
"ckWARN4"
    These return a boolean as to whether or not warnings are enabled for any of the warning category(ies) parameters: "w", "w1", ....

    Should any of the categories by default be enabled even if not within the scope of "use warnings", instead use the "ckWARN_d" macros.

    The categories must be completely independent, one may not be subclassed from the other.

     bool  ckWARN (U32 w)
     bool  ckWARN2(U32 w1, U32 w2)
     bool  ckWARN3(U32 w1, U32 w2, U32 w3)
     bool  ckWARN4(U32 w1, U32 w2, U32 w3, U32 w4)

"ckWARN_d"
"ckWARN2_d"
"ckWARN3_d"
"ckWARN4_d"
    Like "ckWARN", but for use if and only if the warning category(ies) is by default enabled even if not within the scope of "use warnings".

     bool  ckWARN_d (U32 w)
     bool  ckWARN2_d(U32 w1, U32 w2)
     bool  ckWARN3_d(U32 w1, U32 w2, U32 w3)
     bool  ckWARN4_d(U32 w1, U32 w2, U32 w3, U32 w4)

"ckWARN2*"
"ckWARN3*"
"ckWARN4*"
    Described under "ckWARN"

"CLEAR_ERRSV"
    Clear the contents of $@, setting it to the empty string.

    This replaces any read-only SV with a fresh SV and removes any magic.

     void  CLEAR_ERRSV()

"croak"
"croak_nocontext"
    These are XS interfaces to Perl's "die" function.

    They take a sprintf-style format pattern and argument list, which are used to generate a string message. If the message does not end with a newline, then it will be extended with some indication of the current location in the code, as described for "mess_sv".

    The error message will be used as an exception, by default returning control to the nearest enclosing "eval", but subject to modification by a $SIG{__DIE__} handler. In any case, these croak functions never return normally.

    For historical reasons, if "pat" is null then the contents of "ERRSV" ($@) will be used as an error message or object instead of building an error message from arguments. If you want to throw a non-string object, or build an error message in an SV yourself, it is preferable to use the "croak_sv" function, which does not involve clobbering "ERRSV".

    The two forms differ only in that "croak_nocontext" does not take a thread context ("aTHX") parameter. It is usually preferred as it takes up fewer bytes of code than plain "Perl_croak", and time is rarely a critical resource when you are about to throw an exception.

     void  Perl_croak          (pTHX_ const char *pat, ...)
     void       croak_nocontext(      const char *pat, ...)
     void  Perl_croak_nocontext(      const char *pat, ...)

"croak_no_modify"
    This encapsulates a common reason for dying, generating terser object code than using the generic "Perl_croak". It is exactly equivalent to "croak("%s", PL_no_modify)" (which expands to something like "Modification of a read-only value attempted").

    Less code used on exception code paths reduces CPU cache pressure.

     void       croak_no_modify()
     void  Perl_croak_no_modify()

"croak_nocontext*"
    Described under "croak"

"croak_sv"
    This is an XS interface to Perl's "die" function.

    "baseex" is the error message or object. If it is a reference, it will be used as-is. Otherwise it is used as a string, and if it does not end with a newline then it will be extended with some indication of the current location in the code, as described for "mess_sv".

    The error message or object will be used as an exception, by default returning control to the nearest enclosing "eval", but subject to modification by a $SIG{__DIE__} handler. In any case, the "croak_sv" function never returns normally.

    To die with a simple string message, the "croak" function may be more convenient.

     void       croak_sv(      SV *baseex)
     void  Perl_croak_sv(pTHX_ SV *baseex)

"die"
"die_nocontext"
    These behave the same as "croak", except for the return type. They should be used only where the "OP *" return type is required. They never actually return.

    The two forms differ only in that "die_nocontext" does not take a thread context ("aTHX") parameter, so is used in situations where the caller doesn't already have the thread context.

     OP *  Perl_die          (pTHX_ const char *pat, ...)
     OP *       die_nocontext(      const char *pat, ...)
     OP *  Perl_die_nocontext(      const char *pat, ...)

"die_sv"
    This behaves the same as "croak_sv", except for the return type. It should be used only where the "OP *" return type is required. The function never actually returns.

     OP *       die_sv(      SV *baseex)
     OP *  Perl_die_sv(pTHX_ SV *baseex)

"ERRSV"
    Returns the SV for $@, creating it if needed.

     SV *  ERRSV

"fatal_warner"
    Like "warner" except that it acts as if fatal warnings are enabled for the warning.

    If called when there are pending compilation errors this function may return.

    This is currently used to generate "used only once" fatal warnings since the COP where the name being reported is no longer the current COP when the warning is generated and may be useful for similar cases.

    "err" must be one of the "packWARN", "packWARN2", "packWARN3", "packWARN4" macros populated with the appropriate number of warning categories.

     void  Perl_fatal_warner(pTHX_ U32 err, const char *pat, ...)

"packWARN"
"packWARN2"
"packWARN3"
"packWARN4"
    These macros are used to pack warning categories into a single U32 to pass to macros and functions that take a warning category parameter. The number of categories to pack is given by the name, with a corresponding number of category parameters passed.

     U32  packWARN (U32 w1)
     U32  packWARN2(U32 w1, U32 w2)
     U32  packWARN3(U32 w1, U32 w2, U32 w3)
     U32  packWARN4(U32 w1, U32 w2, U32 w3, U32 w4)

"SANE_ERRSV"
    Clean up ERRSV so we can safely set it.

    This replaces any read-only SV with a fresh writable copy and removes any magic.

     void  SANE_ERRSV()

"sv_regex_global_pos_clear"
    Resets the value in the regexp global match position magic, if it exists, so that it does not take effect.

     void       sv_regex_global_pos_clear(      SV *sv)
     void  Perl_sv_regex_global_pos_clear(pTHX_ SV *sv)

"sv_regex_global_pos_get"
    If the given SV has regexp global match position magic, sets the STRLEN pointed to by "posp" to the current value of the position and returns true. If not, returns false.

    If flags is zero, the return value will count in units of characters. If the "SV_POSBYTES" flag is present, this will count instead in units of bytes, which may be different if the SV has the "SvUTF8" flag set.

     bool       sv_regex_global_pos_get(      SV *sv, STRLEN *posp,
                                              U32 flags)
     bool  Perl_sv_regex_global_pos_get(pTHX_ SV *sv, STRLEN *posp,
                                              U32 flags)

"sv_regex_global_pos_set"
    Sets the value in the regexp global match position magic, first adding it if necessary. If "pos" is given as a negative value, this will count backwards from the end of the string.

    If flags is zero, "pos" will count in units of characters. If the "SV_POSBYTES" flag is present, this will count instead in units of bytes, which may be different if the SV has the "SvUTF8" flag set. In that case, it will be the caller's responsibility to ensure that "pos" only lands on the boundary between characters, and not in the middle of a multi-byte character.

     void       sv_regex_global_pos_set(      SV *sv, STRLEN pos,
                                              U32 flags)
     void  Perl_sv_regex_global_pos_set(pTHX_ SV *sv, STRLEN pos,
                                              U32 flags)

"sv_vstring_get"
    If the given SV has vstring magic, stores the length of it into the variable addressed by "lenp", and returns the string pointer. If not, returns "NULL".

    If a pointer is returned to the caller, it will point to memory owned by the SV itself. The caller is not responsible for freeing it after this call, though it will not remain valid for longer than the lifetime of the SV itself. The caller should take a copy of it if it needs to be accessed after this time.

     const char *       sv_vstring_get(      SV * const sv,
                                             STRLEN *lenp)
     const char *  Perl_sv_vstring_get(pTHX_ SV * const sv,
                                             STRLEN *lenp)

"vcroak"
    This is an XS interface to Perl's "die" function.

    "pat" and "args" are a sprintf-style format pattern and encapsulated argument list. These are used to generate a string message. If the message does not end with a newline, then it will be extended with some indication of the current location in the code, as described for "mess_sv".

    The error message will be used as an exception, by default returning control to the nearest enclosing "eval", but subject to modification by a $SIG{__DIE__} handler. In any case, the "croak" function never returns normally.

    For historical reasons, if "pat" is null then the contents of "ERRSV" ($@) will be used as an error message or object instead of building an error message from arguments. If you want to throw a non-string object, or build an error message in an SV yourself, it is preferable to use the "croak_sv" function, which does not involve clobbering "ERRSV".

     void       vcroak(      const char *pat, va_list *args)
     void  Perl_vcroak(pTHX_ const char *pat, va_list *args)

"vfatal_warner"
    This is like "fatal_warner" but "args" are an encapsulated argument list.

     void       vfatal_warner(      U32 err, const char *pat,
                                    va_list *args)
     void  Perl_vfatal_warner(pTHX_ U32 err, const char *pat,
                                    va_list *args)

"vwarn"
    This is an XS interface to Perl's "warn" function.

    This is like "warn", but "args" are an encapsulated argument list.

    Unlike with "vcroak", "pat" is not permitted to be null.

     void       vwarn(      const char *pat, va_list *args)
     void  Perl_vwarn(pTHX_ const char *pat, va_list *args)

"vwarner"
    This is like "warner", but "args" are an encapsulated argument list.

     void       vwarner(      U32 err, const char *pat, va_list *args)
     void  Perl_vwarner(pTHX_ U32 err, const char *pat, va_list *args)

"warn"
"warn_nocontext"
    These are XS interfaces to Perl's "warn" function.

    They take a sprintf-style format pattern and argument list, which are used to generate a string message. If the message does not end with a newline, then it will be extended with some indication of the current location in the code, as described for "mess_sv".

    The error message or object will by default be written to standard error, but this is subject to modification by a $SIG{__WARN__} handler.

    Unlike with "croak", "pat" is not permitted to be null.

    The two forms differ only in that "warn_nocontext" does not take a thread context ("aTHX") parameter, so is used in situations where the caller doesn't already have the thread context.

     void  Perl_warn          (pTHX_ const char *pat, ...)
     void       warn_nocontext(      const char *pat, ...)
     void  Perl_warn_nocontext(      const char *pat, ...)

"warn_sv"
    This is an XS interface to Perl's "warn" function.

    "baseex" is the error message or object. If it is a reference, it will be used as-is. Otherwise it is used as a string, and if it does not end with a newline then it will be extended with some indication of the current location in the code, as described for "mess_sv".

    The error message or object will by default be written to standard error, but this is subject to modification by a $SIG{__WARN__} handler.

    To warn with a simple string message, the "warn" function may be more convenient.

     void       warn_sv(      SV *baseex)
     void  Perl_warn_sv(pTHX_ SV *baseex)

"warner"
"warner_nocontext"
    These output a warning of the specified category (or categories) given by "err", using the sprintf-style format pattern "pat", and argument list.

    "err" must be one of the "packWARN", "packWARN2", "packWARN3", "packWARN4" macros populated with the appropriate number of warning categories. If any of the warning categories they specify is fatal, a fatal exception is thrown.

    In any event a message is generated by the pattern and arguments. If the message does not end with a newline, then it will be extended with some indication of the current location in the code, as described for "mess_sv".

    The error message or object will by default be written to standard error, but this is subject to modification by a $SIG{__WARN__} handler.

    "pat" is not permitted to be null.

    The two forms differ only in that "warner_nocontext" does not take a thread context ("aTHX") parameter, so is used in situations where the caller doesn't already have the thread context.

    These functions differ from the similarly named "warn" functions, in that the latter are for XS code to unconditionally display a warning, whereas these are for code that may be compiling a perl program, and does extra checking to see if the warning should be fatal.

     void  Perl_warner          (pTHX_ U32 err, const char *pat, ...)
     void       warner_nocontext(      U32 err, const char *pat, ...)
     void  Perl_warner_nocontext(      U32 err, const char *pat, ...)

XS
xsubpp compiles XS code into C. See "xsubpp" in perlutil.

"aMY_CXT"
"aMY_CXT_"
"_aMY_CXT"
    Described in perlxs.

"ax"
    Variable which is setup by "xsubpp" to indicate the stack base offset, used by the "ST", "XSprePUSH" and "XSRETURN" macros. The "dMARK" macro must be called prior to setup the "MARK" variable.

     Stack_off_t  ax

"CLASS"
    Variable which is setup by "xsubpp" to indicate the class name for a C++ XS constructor. This is always a "char*". See "THIS".

     char*  CLASS

"dAX"
    Sets up the "ax" variable. This is usually handled automatically by "xsubpp" by calling "dXSARGS".

       dAX;

"dAXMARK"
    Sets up the "ax" variable and stack marker variable "mark". This is usually handled automatically by "xsubpp" by calling "dXSARGS".

       dAXMARK;

"dITEMS"
    Sets up the "items" variable. This is usually handled automatically by "xsubpp" by calling "dXSARGS".

       dITEMS;

"dMY_CXT"
    Described in perlxs.

"dMY_CXT_SV"
    Now a placeholder that declares nothing

       dMY_CXT_SV;

"dUNDERBAR"
    Sets up any variable needed by the "UNDERBAR" macro. It used to define "padoff_du", but it is currently a noop. However, it is strongly advised to still use it for ensuring past and future compatibility.

       dUNDERBAR;

"dXSARGS"
    Sets up stack and mark pointers for an XSUB, calling "dSP" and "dMARK". Sets up the "ax" and "items" variables by calling "dAX" and "dITEMS". This is usually handled automatically by "xsubpp".

       dXSARGS;

"dXSI32"
    Sets up the "ix" variable for an XSUB which has aliases. This is usually handled automatically by "xsubpp".

       dXSI32;

"items"
    Variable which is setup by "xsubpp" to indicate the number of items on the stack. See "Variable-length Parameter Lists" in perlxs.

     Stack_off_t  items

"ix"
    Variable which is setup by "xsubpp" to indicate which of an XSUB's aliases was used to invoke it. See "The ALIAS: Keyword" in perlxs.

     I32  ix

"MY_CXT"
"MY_CXT_CLONE"
"MY_CXT_INIT"
"pMY_CXT"
"pMY_CXT_"
"_pMY_CXT"
    Described in perlxs.

"RETVAL"
    Variable which is setup by "xsubpp" to hold the return value for an XSUB. This is always the proper type for the XSUB. See "The RETVAL Variable" in perlxs.

     type  RETVAL

"ST"
    Used to access elements on the XSUB's stack.

     SV*  ST(int ix)

"START_MY_CXT"
    Described in perlxs.

"THIS"
    Variable which is setup by "xsubpp" to designate the object in a C++ XSUB. This is always the proper type for the C++ object. See "CLASS" and "Using XS With C++" in perlxs.

     type  THIS

"UNDERBAR"
    The SV* corresponding to the $_ variable. Works even if there is a lexical $_ in scope.

"XS"
    Macro to declare an XSUB and its C parameter list. This is handled by "xsubpp". It is the same as using the more explicit "XS_EXTERNAL" macro; the latter is preferred.

"XS_EXTERNAL"
    Macro to declare an XSUB and its C parameter list explicitly exporting the symbols.

"XS_INTERNAL"
    Macro to declare an XSUB and its C parameter list without exporting the symbols. This is handled by "xsubpp" and generally preferable over exporting the XSUB symbols unnecessarily.

"XSPROTO"
    Macro used by "XS_INTERNAL" and "XS_EXTERNAL" to declare a function prototype. You probably shouldn't be using this directly yourself.

Undocumented elements
The following functions have been flagged as part of the public API, but are currently undocumented. Use them at your own risk, as the interfaces are subject to change. Functions that are not listed in this document are not intended for public use, and should NOT be used under any circumstances.

If you feel you need to use one of these functions, first send email to perl5-porters@perl.org <mailto:perl5-porters@perl.org>. It may be that there is a good reason for the function not being documented, and it should be removed from this list; or it may just be that no one has gotten around to documenting it. In the latter case, you will be asked to submit a patch to document the function. Once your patch is accepted, it will indicate that the interface is stable (unless it is explicitly marked otherwise) and usable by you.

 clone_params_del  clone_params_new  do_open  do_openn  sv_dup  sv_dup_inc

Next are the API-flagged elements that are considered experimental. Using one of these is even more risky than plain undocumented ones. They are listed here because they should be listed somewhere (so their existence doesn't get lost) and this is the best place for them.

 apply_attrs_string        hv_store_flags       thread_locale_init
 gv_fetchmethod_pv_flags   leave_adjust_stacks  thread_locale_term
 gv_fetchmethod_pvn_flags  newXS_flags
 gv_fetchmethod_sv_flags   savetmps

Finally are deprecated undocumented API elements. Do not use any for new code; remove all occurrences of all of these from existing code.

There are currently no items of this type

AUTHORS
Until May 1997, this document was maintained by Jeff Okamoto <okamoto@corp.hp.com>. It is now maintained as part of Perl itself.

With lots of help and suggestions from Dean Roehrich, Malcolm Beattie, Andreas Koenig, Paul Hudson, Ilya Zakharevich, Paul Marquess, Neil Bowers, Matthew Green, Tim Bunce, Spider Boardman, Ulrich Pfeifer, Stephen McCamant, and Gurusamy Sarathy.

API Listing originally by Dean Roehrich <roehrich@cray.com>.

Updated to be autogenerated from comments in the source by Benjamin Stuhl.

SEE ALSO
config.h, perlapio, perlcall, perlclib, perlembed, perlfilter, perlguts, perlhacktips, perlintern, perlinterp, perliol, perlmroapi, perlreapi, perlreguts, perlxs