# (c) Copyright 2003-2015 HP Development Company, L.P.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
#
# ****************************************
#
# [TYPE_BOOL] : T | F | 0 | 1 (not case sensitive)
# [TYPE_INT] : integer value
# [TYPE_LIST]: <string>,... (no spaces between values/commas)
# [TYPE_STRING]: string value (commas are not significant)
#
# ****************************************
# [distros]
# distros=<list of distro names> [TYPE_LIST]
#
# [<distro name>]
# index=<n> # Must be unique [TYPE_INT]
# versions=<list of version names> [TYPE_LIST]
# display_name=<human readable display name> [TYPE_STRING]
# alt_names=<alternate names to search for in /etc/issue> [TYPE_LIST]
# display=1|0 [TYPE_BOOL]
# notes=<distro notes> [TYPE_STRING]
# package_mgrs=<package managers to search for in ps> [TYPE_LIST]
# package_mgr_cmd=<command to install packages, list replaced in $packages_to_install> [TYPE_STRING]
# pre_install_cmd=<commands to run before installer checks dependencies (comma sep. list)> [TYPE_LIST]
# pre_depend_cmd=<commands to run before packages are installed (comma sep. list)> [TYPE_LIST]
# post_depend_cmd=<commands to run after packages are installed (comma sep. list)> [TYPE_LIST]
# scanjet_depend_cmd=<commands to run for installing python2 packages related to scanjet features (comma sep. list)> [TYPE_LIST]
# scanjet_py3_depend_cmd=<commands to run for installing python3 packages related to scanjet features (comma sep. list)> [TYPE_LIST]
# hplip_remove_cmd=<command to remove package version of hplip> [TYPE_LIST]
# su_sudo=su|sudo  [TYPE_STRING] # su is default
# ppd_install=ppd|drv  [TYPE_STRING] # ppd is default
# udev_mode_fix=1|0 [TYPE_BOOL]
# ppd_dir=<ppd dir> [TYPE_STRING] # Used for BOTH ppd and drv install types
# drv_dir=<drv dir> [TYPE_STRING] # Used for only drv installs
# fix_ppd_symlink=1|0 [TYPE_BOOL]
# ui_toolkit=qt3|qt4|gtk|none [TYPE_STRING] # gtk not supported. qt3 not supported by installer.
# policykit=1|0 [TYPE_BOOL]
# native_cups=1|0 [TYPE_BOOL]
# package_available=1|0 [TYPE_BOOL]
# package_arch=<list of processor architectures> [TYPE_LIST]
# add_user_to_group=<usermod params> [TYPE_STRING] (leave empty for none) [ex. "-a -G sys" or "-G lp"]
# open_mdns_port=<command(s) to use to open the mdns multicast port 5353> [TYPE_LIST]
# acl_rules=1|0 [TYPE_BOOL] # For Karmic+
#
# # Version data overrides distro data if present.
# # <version name> must be present in [<distro name>] section's versions= list.
# [<distro name>:<version name>]
# code_name=<code name> [TYPE_STRING]
# supported=1|0 [TYPE_BOOL]
# release_date=<human readable date YYYY-MM-DD> [TYPE_STRING]
# notes=<version notes> [TYPE_STRING]
# ppd_install=ppd|drv [TYPE_STRING] # ppd is default
# udev_mode_fix=1|0 [TYPE_BOOL]
# ppd_dir=<ppd dir> [TYPE_STRING] # Used for BOTH ppd and drv install types
# drv_dir=<drv dir> [TYPE_STRING] # Used for only drv installs
# fix_ppd_symlink=1|0 [TYPE_BOOL]
# scan_supported=1|0 [TYPE_BOOL]
# fax_supported=1|0 [TYPE_BOOL]
# pcard_supported=1|0 [TYPE_BOOL]
# network_supported=1|0 [TYPE_BOOL]
# parallel_supported=1|0 [TYPE_BOOL]
# usb_supported=1|0 [TYPE_BOOL]
# packaged_version=<hplip version major.year.month> [TYPE_STRING] (version of HPLIP pre-packaged in distro, e.g. "2.8.12")
# cups_path_with_bitness=1|0 [TYPE_BOOL] (False is default)
# ui_toolkit=qt3|qt4|gtk|none [TYPE_STRING]
# foomatic_rip_hplip=1|0 [TYPE_BOOL] (False is default)
# policykit=1|0 [TYPE_BOOL]
# native_cups=1|0 [TYPE_BOOL]
# package_available=1|0 [TYPE_BOOL]
# package_arch=<list of processor architectures> [TYPE_LIST]
# add_user_to_group=<usermod params> [TYPE_STRING] (leave empty for none) [ex. "-a -G sys" or "-G lp"]
# open_mdns_port=<command(s) to use to open the mdns multicast port 5353> [TYPE_LIST]
# acl_rules=1|0 [TYPE_BOOL] # For Karmic+
# libdir_path=<lib directory path> [TYPE_STRING] # Used if libdir location is to be provided in 64 bit machines

# # Only include these sections if supported==1 for this <distro name>:<version name>.
# [<distro name>:<version name>:<dependency name>]
# packages=<package list to satisfy dependency (comma sep. list)> [TYPE_LIST]
# commands=<command list to satisfy dependency (comma sep. list)> [TYPE_LIST]
#
# ****************************************

[distros]
distros=unknown,mepis,debian,suse,mandriva,fedora,redhat,rhel,slackware,gentoo,redflag,ubuntu,xandros,freebsd,linspire,ark,pclinuxos,centos,igos,linuxmint,linpus,gos,boss,lfs,manjarolinux

# ****************************************

[unknown]
index=0
display_name=Unknown
versions=0
display=0
package_mgrs=
su_sudo=
drv_dir=

[unknown:0]
supported=0

# ****************************************

[suse]
index=3
versions=12.2,12.3,13.1,13.2,42.1,42.2,42.3,15.0,15.1
display_name=SUSE Linux
alt_names=
display=1
notes=
package_mgrs=yast,yast2,opensuse-updater,zypper,package-manager
package_mgr_cmd=su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses $packages_to_install"
pre_depend_cmd=
post_depend_cmd=
scanjet_depend_cmd=su -c "zypper --non-interactive --no-gpg-checks remove python-numpy",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses python-pip",su -c "pip2 install --upgrade pip",su -c "pip2 install setuptools",su -c "pip2 install opencv-python",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses leptonica-devel",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses tesseract-ocr",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses tesseract-ocr-devel",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses tesseract-ocr-traineddata-*",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses libzbar-devel",su -c "pip2 install zbar",su -c "pip2 install PyPDF2",su -c "pip2 install imutils",su -c "pip2 install tesserocr",su -c "pip2 install pypdfocr",su -c "pip2 install --ignore-installed decorator",su -c "pip2 install scikit-image",su -c "pip2 install scipy"
#su -c "pip2 install --upgrade setuptools"
scanjet_py3_depend_cmd=su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses python3-pip",su -c "pip3 install --upgrade pip",su -c "pip3 install opencv-python",su -c "pip3 install setuptools",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses leptonica-devel",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses tesseract-ocr",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses tesseract-ocr-devel",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses tesseract-ocr-traineddata-*",su -c "pip3 install PyPDF2",su -c "pip3 install imutils",su -c "pip3 install tesserocr",su -c "pip3 install ocrmypdf",su -c "pip3 install --ignore-installed decorator",su -c "pip3 install scikit-image",su -c "pip3 install scipy"
#su -c "pip3 install --upgrade setuptools",
hplip_remove_cmd=su -c "zypper --non-interactive rm hplip"
su_sudo=su
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/manufacturer-PPDs/hp
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP

# ********************
[suse:12.2]
code_name=Mantis
supported=1
scan_supported=1
fax_supported=1
pcard_supported=0
network_supported=1
parallel_supported=0
usb_supported=1
packaged_version=3.11.6
release_date=2012-07-11
notes=Please be sure to disable the CD repositories in YaST.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
cups_path_with_bitness=0
ui_toolkit=qt4
native_cups=1
pre_depend_cmd=su -c "zypper refresh"

[suse:12.2:cups]
packages=cups,cups-client

[suse:12.2:cups-devel]
packages=cups-devel,cupsddk

[suse:12.2:gcc]
packages=gcc-c++

[suse:12.2:gs]
packages=ghostscript-library

[suse:12.2:libcrypto]
packages=openssl

[suse:12.2:libjpeg]
packages=libjpeg-devel,zlib-devel

[suse:12.2:libnetsnmp-devel]
packages=net-snmp-devel

[suse:12.2:libpthread]
packages=glibc

[suse:12.2:libtool]
packages=libtool,libgphoto2-devel,rpm-build

[suse:12.2:libusb]
packages=libusb-1_0-devel,libusb-1_0-0

[suse:12.2:make]
packages=make

[suse:12.2:pil]
packages=python-imaging

[suse:12.2:ppdev]
packages=
commands=su -c "modprobe ppdev"

[suse:12.2:pyqt]
packages=python-qt

[suse:12.2:pyqt4]
packages=python-qt4

[suse:12.2:pyqt4-dbus]
packages=dbus-1-python-devel,dbus-1-python

[suse:12.2:python-devel]
packages=python-devel,python-xml,libpython2_7-1_0

[suse:12.2:python23]
packages=python

[suse:12.2:python2X]
packages=python

[suse:12.2:reportlab]
packages=

[suse:12.2:sane]
packages=xsane

[suse:12.2:sane-devel]
packages=sane-backends-devel

[suse:12.2:scanimage]
packages=sane-backends

[suse:12.2:xsane]
packages=xsane

[suse:12.2:cups-ddk]
packages=cupsddk

[suse:12.2:python-dbus]
packages=dbus-1-python

[suse:12.2:dbus]
packages=dbus-1-devel,python-gobject2

[suse:12.2:python-xml]
packages=python-xml,libpython2_7-1_0

[suse:12.2:cups-image]
packages=cups-devel

[suse:12.2:python-notify]
packages=python-notify

[suse:12.2:network]
packages=wget

[suse:12.2:avahi-utils]
packages=avahi-utils

[suse:12.2:python3-pyqt4]
packages=python3-qt4,python3-qt4-devel

[suse:12.2:python3-dbus]
packages=dbus-1-python3,python3-gobject,python3-gobject2-devel

[suse:12.2:python3-devel]
packages=python3-devel

[suse:12.2:python3-pyqt4-dbus]
packages=dbus-1-python3-devel,dbus-1-python3

[suse:12.2:python3-pil]
packages=PKG_FROM_PIP:pillow

[suse:12.2:python3-xml]
packages=python3-xml

[suse:12.2:automake]
packages=automake


# ********************
[suse:12.3]
code_name=Dartmouth
supported=1
scan_supported=1
fax_supported=1
pcard_supported=0
network_supported=1
parallel_supported=0
usb_supported=1
packaged_version=3.12.11
release_date=2013-03-13
notes=Please be sure to disable the CD repositories in YaST.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
cups_path_with_bitness=0
ui_toolkit=qt4
native_cups=1
pre_depend_cmd=su -c "zypper refresh"

[suse:12.3:cups]
packages=cups,cups-client

[suse:12.3:cups-devel]
packages=cups-devel,cupsddk

[suse:12.3:gcc]
packages=gcc-c++

[suse:12.3:gs]
packages=ghostscript-library

[suse:12.3:libcrypto]
packages=openssl

[suse:12.3:libjpeg]
packages=libjpeg-devel,zlib-devel

[suse:12.3:libnetsnmp-devel]
packages=net-snmp-devel

[suse:12.3:libpthread]
packages=glibc

[suse:12.3:libtool]
packages=libtool,libgphoto2-devel,rpm-build

[suse:12.3:libusb]
packages=libusb-1_0-devel,libusb-1_0-0

[suse:12.3:make]
packages=make

[suse:12.3:pil]
packages=python-imaging

[suse:12.3:ppdev]
packages=
commands=su -c "modprobe ppdev"

[suse:12.3:pyqt]
packages=python-qt

[suse:12.3:pyqt4]
packages=python-qt4

[suse:12.3:pyqt4-dbus]
packages=dbus-1-python-devel,dbus-1-python

[suse:12.3:python-devel]
packages=python-devel,python-xml,libpython2_7-1_0

[suse:12.3:python23]
packages=python

[suse:12.3:python2X]
packages=python

[suse:12.3:reportlab]
packages=

[suse:12.3:sane]
packages=xsane

[suse:12.3:sane-devel]
packages=sane-backends-devel

[suse:12.3:scanimage]
packages=sane-backends

[suse:12.3:xsane]
packages=xsane

[suse:12.3:cups-ddk]
packages=cupsddk

[suse:12.3:python-dbus]
packages=dbus-1-python

[suse:12.3:dbus]
packages=dbus-1-devel,python-gobject2

[suse:12.3:python-xml]
packages=python-xml,libpython2_7-1_0

[suse:12.3:cups-image]
packages=cups-devel

[suse:12.3:python-notify]
packages=python-notify

[suse:12.3:network]
packages=wget

[suse:12.3:avahi-utils]
packages=avahi-utils

[suse:12.3:python3-pyqt4]
packages=python3-qt4,python3-qt4-devel

[suse:12.3:python3-dbus]
packages=dbus-1-python3,python3-gobject,python3-gobject2-devel

[suse:12.3:python3-xml]
packages=python3-xml,python3-lxml

[suse:12.3:python3-devel]
packages=python3-devel

[suse:12.3:python3-pyqt4-dbus]
packages=dbus-1-python3-devel,dbus-1-python3

[suse:12.3:python3-pil]
packages=PKG_FROM_PIP:pillow

[suse:12.3:python3-reportlab]
packages=python3-reportlab

[suse:12.3:python3-notify2]
packages=python3-notify2

[suse:12.3:automake]
packages=automake


# ****************************************

[suse:13.1]
code_name=Evergreen
supported=1
packaged_version=3.13.7
release_date=19.09.2013
same_as_version=12.3

# ****************************************

[suse:13.2]
code_name=Harlequin
supported=1
packaged_version=3.14.6
release_date=04.11.2014
post_depend_cmd=su -c "zypper --non-interactive --no-gpg-checks in --force --auto-agree-with-licenses cups-filters-ghostscript",su -c "service cups restart"
scan_supported=1
fax_supported=1
pcard_supported=0
network_supported=1
parallel_supported=0
usb_supported=1
notes=Please be sure to disable the CD repositories in YaST.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
cups_path_with_bitness=0
ui_toolkit=qt4
native_cups=1
pre_depend_cmd=su -c "zypper refresh"

[suse:13.2:cups]
packages=cups,cups-client

[suse:13.2:cups-devel]
packages=cups-devel,cupsddk

[suse:13.2:gcc]
packages=gcc-c++

[suse:13.2:gs]
packages=ghostscript-library

[suse:13.2:libcrypto]
packages=openssl

[suse:13.2:libjpeg]
packages=libjpeg-devel,zlib-devel

[suse:13.2:libnetsnmp-devel]
packages=net-snmp-devel

[suse:13.2:libpthread]
packages=glibc

[suse:13.2:libtool]
packages=libtool,libgphoto2-devel,rpm-build

[suse:13.2:libusb]
packages=libusb-1_0-devel,libusb-1_0-0

[suse:13.2:make]
packages=make

[suse:13.2:pil]
packages=python-imaging

[suse:13.2:ppdev]
packages=
commands=su -c "modprobe ppdev"

[suse:13.2:pyqt]
packages=python-qt

[suse:13.2:pyqt4]
packages=python-qt4

[suse:13.2:pyqt4-dbus]
packages=dbus-1-python-devel,dbus-1-python

[suse:13.2:python-devel]
packages=python-devel,python-xml,libpython2_7-1_0

[suse:13.2:python23]
packages=python

[suse:13.2:python2X]
packages=python

[suse:13.2:reportlab]
packages=python-reportlab

[suse:13.2:sane]
packages=xsane

[suse:13.2:sane-devel]
packages=sane-backends-devel

[suse:13.2:scanimage]
packages=sane-backends

[suse:13.2:xsane]
packages=xsane

[suse:13.2:cups-ddk]
packages=cupsddk

[suse:13.2:python-dbus]
packages=dbus-1-python

[suse:13.2:dbus]
packages=dbus-1-devel,python-gobject2

[suse:13.2:python-xml]
packages=python-xml,libpython2_7-1_0

[suse:13.2:cups-image]
packages=cups-devel

[suse:13.2:python-notify]
packages=python-notify

[suse:13.2:network]
packages=wget

[suse:13.2:avahi-utils]
packages=avahi-utils

[suse:13.2:python3-pyqt4]
packages=python3-qt4,python3-qt4-devel

[suse:13.2:python3-dbus]
packages=dbus-1-python3,python3-gobject,python3-gobject2-devel

[suse:13.2:python3-xml]
packages=python3-xml,python3-lxml

[suse:13.2:python3-devel]
packages=python3-devel

[suse:13.2:python3-pyqt4-dbus]
packages=dbus-1-python3-devel,dbus-1-python3

[suse:13.2:python3-pil]
packages=python3-Pillow

[suse:13.2:python3-reportlab]
packages=python3-reportlab

[suse:13.2:python3-notify2]
packages=python3-notify2

[suse:13.2:automake]
packages=automake

# ****************************************

[suse:42.1]
code_name=Malachitte
supported=1
packaged_version=3.14.6
release_date=04.11.2015
same_as_version=13.2


# ****************************************

[suse:42.2]
code_name=Harlequin
supported=1
packaged_version=3.16.11
release_date=24.11.2016
post_depend_cmd=su -c "zypper --non-interactive --no-gpg-checks in --force --auto-agree-with-licenses cups-filters-ghostscript",su -c "service cups restart"
scan_supported=1
fax_supported=1
pcard_supported=0
network_supported=1
parallel_supported=0
usb_supported=1
notes=Please be sure to disable the CD repositories in YaST.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
cups_path_with_bitness=0
ui_toolkit=qt4
native_cups=1
pre_depend_cmd=su -c "zypper refresh"

[suse:42.2:cups]
packages=cups,cups-client

[suse:42.2:cups-devel]
packages=cups-devel,cupsddk

[suse:42.2:gcc]
packages=gcc-c++

[suse:42.2:gs]
packages=ghostscript-library

[suse:42.2:libcrypto]
packages=openssl

[suse:42.2:libjpeg]
packages=libjpeg-devel,zlib-devel

[suse:42.2:libnetsnmp-devel]
packages=net-snmp-devel

[suse:42.2:libpthread]
packages=glibc

[suse:42.2:libtool]
packages=libtool,libgphoto2-devel,rpm-build

[suse:42.2:libusb]
packages=libusb-1_0-devel,libusb-1_0-0

[suse:42.2:make]
packages=make

[suse:42.2:pil]
packages=python-imaging

[suse:42.2:ppdev]
packages=
commands=su -c "modprobe ppdev"

[suse:42.2:pyqt]
packages=python-qt

[suse:42.2:pyqt4]
packages=python-qt4

[suse:42.2:pyqt4-dbus]
packages=dbus-1-python-devel,dbus-1-python

[suse:42.2:python-devel]
packages=python-devel,python-xml,libpython2_7-1_0

[suse:42.2:python23]
packages=python

[suse:42.2:python2X]
packages=python

[suse:42.2:reportlab]
packages=

[suse:42.2:sane]
packages=xsane

[suse:42.2:sane-devel]
packages=sane-backends-devel

[suse:42.2:scanimage]
packages=sane-backends

[suse:42.2:xsane]
packages=xsane

[suse:42.2:cups-ddk]
packages=cupsddk

[suse:42.2:python-dbus]
packages=dbus-1-python

[suse:42.2:dbus]
packages=dbus-1-devel,python-gobject2

[suse:42.2:python-xml]
packages=python-xml,libpython2_7-1_0

[suse:42.2:cups-image]
packages=cups-devel

[suse:42.2:python-notify]
packages=python-notify

[suse:42.2:network]
packages=wget

[suse:42.2:avahi-utils]
packages=avahi-utils

[suse:42.2:python3-pyqt4]
packages=python3-qt4,python3-qt4-devel

[suse:42.2:python3-dbus]
packages=dbus-1-python3,python3-gobject,python3-gobject2-devel

[suse:42.2:python3-xml]
packages=python3-xml,python3-lxml

[suse:42.2:python3-devel]
packages=python3-devel

[suse:42.2:python3-pyqt4-dbus]
packages=dbus-1-python3-devel,dbus-1-python3

[suse:42.2:python3-pil]
packages=python3-Pillow

[suse:42.2:python3-reportlab]
packages=python3-reportlab

[suse:42.2:python3-notify2]
packages=python3-notify2

[suse:42.2:automake]
packages=automake


# ****************************************

[suse:42.3]
code_name=Harlequin
supported=1
packaged_version=3.17.9
release_date=26.07.2017
scan_supported=1
fax_supported=1
pcard_supported=0
network_supported=1
parallel_supported=0
usb_supported=1
notes=Please be sure to disable the CD repositories in YaST.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
cups_path_with_bitness=0
ui_toolkit=qt4
native_cups=1
pre_depend_cmd=su -c "zypper refresh"
post_depend_cmd=su -c "zypper --non-interactive --no-gpg-checks in --force --auto-agree-with-licenses cups-filters-ghostscript",su -c "service cups restart"
#scanjet_depend_cmd=su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses python2-pip",su -c "pip2 install --upgrade pip",su -c "pip2 install setuptools",su -c "pip2 install --upgrade setuptools",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses leptonica-devel",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses tesseract-ocr",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses tesseract-ocr-devel",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses tesseract-ocr-traineddata-*",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses libzbar-devel",su -c "pip2 install zbar",su -c "pip2 install opencv-python",su -c "pip2 install PyPDF2",su -c "pip2 install imutils",su -c "pip2 install tesserocr",su -c "pip2 install pypdfocr",su -c "pip2 install --ignore-installed decorator",su -c "pip2 install scikit-image",su -c "pip2 install scipy"
#scanjet_py3_depend_cmd=su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses python3-pip",su -c "pip3 install --upgrade pip",su -c "pip3 install setuptools",su -c "pip3 install --upgrade setuptools",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses leptonica-devel",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses tesseract-ocr",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses tesseract-ocr-devel",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses tesseract-ocr-traineddata-*",su -c "pip3 install opencv-python",su -c "pip3 install PyPDF2",su -c "pip3 install imutils",su -c "pip3 install tesserocr",su -c "pip3 install ocrmypdf",su -c "pip3 install --ignore-installed decorator",su -c "pip3 install scikit-image",su -c "pip3 install scipy"

[suse:42.3:cups]
packages=cups,cups-client

[suse:42.3:cups-devel]
packages=cups-devel,cupsddk

[suse:42.3:gcc]
packages=gcc-c++

[suse:42.3:gs]
packages=ghostscript-library

[suse:42.3:libcrypto]
packages=openssl

[suse:42.3:libjpeg]
packages=libjpeg-devel,zlib-devel

[suse:42.3:libnetsnmp-devel]
packages=net-snmp-devel

[suse:42.3:libpthread]
packages=glibc

[suse:42.3:libtool]
packages=libtool,libgphoto2-devel,rpm-build

[suse:42.3:libusb]
packages=libusb-1_0-devel,libusb-1_0-0

[suse:42.3:make]
packages=make

[suse:42.3:pil]
packages=python-imaging

[suse:42.3:ppdev]
packages=
commands=su -c "modprobe ppdev"

[suse:42.3:pyqt]
packages=python-qt

[suse:42.3:pyqt4]
packages=python-qt4

[suse:42.3:pyqt4-dbus]
packages=dbus-1-python-devel,dbus-1-python

[suse:42.3:python-devel]
packages=python-devel,python-xml,libpython2_7-1_0

[suse:42.3:python23]
packages=python

[suse:42.3:python2X]
packages=python

[suse:42.3:reportlab]
packages=

[suse:42.3:sane]
packages=xsane

[suse:42.3:sane-devel]
packages=sane-backends-devel

[suse:42.3:scanimage]
packages=sane-backends

[suse:42.3:xsane]
packages=xsane

[suse:42.3:cups-ddk]
packages=cupsddk

[suse:42.3:python-dbus]
packages=dbus-1-python

[suse:42.3:dbus]
packages=dbus-1-devel,python-gobject2

[suse:42.3:python-xml]
packages=python-xml,libpython2_7-1_0

[suse:42.3:cups-image]
packages=cups-devel

[suse:42.3:python-notify]
packages=python-notify

[suse:42.3:network]
packages=wget

[suse:42.3:avahi-utils]
packages=avahi-utils

[suse:42.3:python3-pyqt4]
packages=python3-qt4,python3-qt4-devel

[suse:42.3:python3-dbus]
packages=dbus-1-python3,python3-gobject,python3-gobject2-devel

[suse:42.3:python3-xml]
packages=python3-xml,python3-lxml

[suse:42.3:python3-devel]
packages=python3-devel

[suse:42.3:python3-pyqt4-dbus]
packages=dbus-1-python3-devel,dbus-1-python3

[suse:42.3:python3-pil]
packages=python3-Pillow

[suse:42.3:python3-reportlab]
packages=python3-reportlab

[suse:42.3:python3-notify2]
packages=python3-notify2

[suse:42.3:automake]
packages=automake


# ****************************************


[suse:15.0]
code_name=Harlequin
supported=1
packaged_version=3.19.1
release_date=27.01.2018
scan_supported=1
fax_supported=1
pcard_supported=0
network_supported=1
parallel_supported=0
usb_supported=1
notes=Please be sure to disable the CD repositories in YaST.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
cups_path_with_bitness=0
ui_toolkit=qt4
native_cups=1
pre_depend_cmd=su -c "zypper refresh"
post_depend_cmd=su -c "zypper --non-interactive --no-gpg-checks in --force --auto-agree-with-licenses cups-filters-ghostscript",su -c "service cups restart"
scanjet_depend_cmd=su -c "zypper --non-interactive --no-gpg-checks remove python-numpy",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses python-pip",su -c "pip2 install --upgrade pip",su -c "pip2 install setuptools",su -c "pip2 install opencv-python",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses leptonica-devel",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses tesseract-ocr",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses tesseract-ocr-devel",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses tesseract-ocr-traineddata-*",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses libzbar-devel",su -c "pip2 install zbar",su -c "pip2 install PyPDF2",su -c "pip2 install imutils",su -c "pip2 install tesserocr",su -c "pip2 install pypdfocr",su -c "pip2 install --ignore-installed decorator",su -c "pip2 install scikit-image",su -c "pip2 install reportlab==3.4.0",su -c "pip2 install scipy"
#su -c "pip2 install --upgrade setuptools"
scanjet_py3_depend_cmd=su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses python3-pip",su -c "pip3 install --upgrade pip",su -c "pip3 install opencv-python",su -c "pip3 install setuptools",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses leptonica-devel",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses tesseract-ocr",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses tesseract-ocr-devel",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses tesseract-ocr-traineddata-*",su -c "pip3 install PyPDF2",su -c "pip3 install imutils",su -c "pip3 install tesserocr",su -c "pip3 install ocrmypdf",su -c "pip3 install --ignore-installed decorator",su -c "pip3 install scikit-image",su -c "pip3 install reportlab==3.4.0",su -c "pip3 install scipy"

[suse:15.0:cups]
packages=cups,cups-client

[suse:15.0:cups-devel]
packages=cups-devel,cupsddk

[suse:15.0:gcc]
packages=gcc-c++

[suse:15.0:gs]
packages=ghostscript-library

[suse:15.0:libcrypto]
packages=openssl

[suse:15.0:libjpeg]
packages=libjpeg-devel,zlib-devel

[suse:15.0:libnetsnmp-devel]
packages=net-snmp-devel

[suse:15.0:libpthread]
packages=glibc

[suse:15.0:libtool]
packages=libtool,libgphoto2-devel,rpm-build

[suse:15.0:libusb]
packages=libusb-1_0-devel,libusb-1_0-0

[suse:15.0:make]
packages=make

[suse:15.0:pil]
packages=python-imaging

[suse:15.0:ppdev]
packages=
commands=su -c "modprobe ppdev"

[suse:15.0:pyqt]
packages=python-qt

[suse:15.0:pyqt4]
packages=python-qt4

[suse:15.0:pyqt4-dbus]
packages=dbus-1-python-devel,dbus-1-python

[suse:15.0:python-devel]
packages=python-devel,python-xml,libpython2_7-1_0

[suse:15.0:python23]
packages=python

[suse:15.0:python2X]
packages=python

[suse:15.0:reportlab]
packages=

[suse:15.0:sane]
packages=xsane

[suse:15.0:sane-devel]
packages=sane-backends-devel

[suse:15.0:scanimage]
packages=sane-backends

[suse:15.0:xsane]
packages=xsane

[suse:15.0:cups-ddk]
packages=cupsddk

[suse:15.0:python-dbus]
packages=dbus-1-python

[suse:15.0:dbus]
packages=dbus-1-devel,python-gobject2

[suse:15.0:python-xml]
packages=python-xml,libpython2_7-1_0

[suse:15.0:cups-image]
packages=cups-devel

[suse:15.0:python-notify]
packages=python-notify

[suse:15.0:network]
packages=wget

[suse:15.0:avahi-utils]
packages=avahi-utils

[suse:15.0:python3-pyqt4]
packages=python3-qt4,python3-qt4-devel

[suse:15.0:python3-dbus]
packages=dbus-1-python3,python3-gobject,python3-gobject2-devel

[suse:15.0:python3-xml]
packages=python3-xml,python3-lxml

[suse:15.0:python3-devel]
packages=python3-devel

[suse:15.0:python3-pyqt4-dbus]
packages=dbus-1-python3-devel,dbus-1-python3

[suse:15.0:python3-pil]
packages=python3-Pillow

[suse:15.0:python3-reportlab]
packages=python3-reportlab

[suse:15.0:python3-notify2]
packages=python3-notify2

[suse:15.0:automake]
packages=automake

# ****************************************


[suse:15.1]
code_name=Harlequin
supported=1
packaged_version=3.19.8
release_date=22.05.2019
scan_supported=1
fax_supported=1
pcard_supported=0
network_supported=1
parallel_supported=0
usb_supported=1
notes=Please be sure to disable the CD repositories in YaST.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
cups_path_with_bitness=0
ui_toolkit=qt4
native_cups=1
pre_depend_cmd=su -c "zypper refresh"
post_depend_cmd=su -c "zypper --non-interactive --no-gpg-checks in --force --auto-agree-with-licenses cups-filters-ghostscript",su -c "service cups restart"
scanjet_depend_cmd=su -c "zypper --non-interactive --no-gpg-checks remove python-numpy",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses python-pip",su -c "pip2 install --upgrade pip",su -c "pip2 install setuptools",su -c "pip2 install opencv-python",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses leptonica-devel",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses tesseract-ocr",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses tesseract-ocr-devel",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses tesseract-ocr-traineddata-*",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses libzbar-devel",su -c "pip2 install zbar",su -c "pip2 install PyPDF2",su -c "pip2 install imutils",su -c "pip2 install tesserocr",su -c "pip2 install pypdfocr",su -c "pip2 install --ignore-installed decorator",su -c "pip2 install scikit-image",su -c "pip2 install reportlab==3.4.0",su -c "pip2 install scipy"
#su -c "pip2 install --upgrade setuptools"
scanjet_py3_depend_cmd=su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses python3-pip",su -c "pip3 install --upgrade pip",su -c "pip3 install opencv-python",su -c "pip3 install setuptools",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses leptonica-devel",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses tesseract-ocr",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses tesseract-ocr-devel",su -c "zypper --non-interactive --no-gpg-checks in --auto-agree-with-licenses tesseract-ocr-traineddata-*",su -c "pip3 install PyPDF2",su -c "pip3 install imutils",su -c "pip3 install tesserocr",su -c "pip3 install ocrmypdf",su -c "pip3 install --ignore-installed decorator",su -c "pip3 install scikit-image",su -c "pip3 install reportlab==3.4.0",su -c "pip3 install scipy"

[suse:15.1:cups]
packages=cups,cups-client

[suse:15.1:cups-devel]
packages=cups-devel,cupsddk

[suse:15.1:gcc]
packages=gcc-c++

[suse:15.1:gs]
packages=ghostscript-library

[suse:15.1:libcrypto]
packages=openssl

[suse:15.1:libjpeg]
packages=libjpeg-devel,zlib-devel

[suse:15.1:libnetsnmp-devel]
packages=net-snmp-devel

[suse:15.1:libpthread]
packages=glibc

[suse:15.1:libtool]
packages=libtool,libgphoto2-devel,rpm-build

[suse:15.1:libusb]
packages=libusb-1_0-devel,libusb-1_0-0

[suse:15.1:make]
packages=make

[suse:15.1:pil]
packages=python-imaging

[suse:15.1:ppdev]
packages=
commands=su -c "modprobe ppdev"

[suse:15.1:pyqt]
packages=python-qt

[suse:15.1:pyqt4]
packages=python-qt4

[suse:15.1:pyqt4-dbus]
packages=dbus-1-python-devel,dbus-1-python

[suse:15.1:python-devel]
packages=python-devel,python-xml,libpython2_7-1_0

[suse:15.1:python23]
packages=python

[suse:15.1:python2X]
packages=python

[suse:15.1:reportlab]
packages=

[suse:15.1:sane]
packages=xsane

[suse:15.1:sane-devel]
packages=sane-backends-devel

[suse:15.1:scanimage]
packages=sane-backends

[suse:15.1:xsane]
packages=xsane

[suse:15.1:cups-ddk]
packages=cupsddk

[suse:15.1:python-dbus]
packages=dbus-1-python

[suse:15.1:dbus]
packages=dbus-1-devel,python-gobject2

[suse:15.1:python-xml]
packages=python-xml,libpython2_7-1_0

[suse:15.1:cups-image]
packages=cups-devel

[suse:15.1:python-notify]
packages=python-notify

[suse:15.1:network]
packages=wget

[suse:15.1:avahi-utils]
packages=avahi-utils

[suse:15.1:python3-pyqt4]
packages=python3-qt4,python3-qt4-devel

[suse:15.1:python3-dbus]
packages=dbus-1-python3,python3-gobject,python3-gobject2-devel

[suse:15.1:python3-xml]
packages=python3-xml,python3-lxml

[suse:15.1:python3-devel]
packages=python3-devel

[suse:15.1:python3-pyqt4-dbus]
packages=dbus-1-python3-devel,dbus-1-python3

[suse:15.1:python3-pil]
packages=python3-Pillow

[suse:15.1:python3-reportlab]
packages=python3-reportlab

[suse:15.1:python3-notify2]
packages=python3-notify2

[suse:15.1:automake]
packages=automake

# ****************************************
[redhat]
index=6
versions=8.0,9.0
display_name=Red Hat
alt_names=
display=1
notes=
package_mgrs=yum,rpm,up2date
#package_mgr_cmd=rpm install $packages_to_install
package_mgr_cmd=su -c 'yum -y -d 10 -e 1 install $packages_to_install'
pre_depend_cmd=su -c 'yum list update'
post_depend_cmd=
hplip_remove_cmd=su -c 'rpm -ev hplipfull'
su_sudo=su
ppd_install=ppd
udev_mode_fix=1
ppd_dir=
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt3

# ********************
[redhat:8.0]
code_name=Psyche
supported=0
scan_supported=1
fax_supported=0
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=
release_date=2002-9-1
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=none

# ********************
[redhat:9.0]
code_name=Shrike
supported=0
scan_supported=1
fax_supported=0
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=
release_date=2003-3-1
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=none

# ****************************************
[turbolinux]
index=10
versions=any
display_name=Turbolinux
alt_names=
display=0
notes=
package_mgrs=
package_mgr_cmd=
pre_depend_cmd=
post_depend_cmd=
hplip_remove_cmd=
su_sudo=su
ppd_install=ppd
udev_mode_fix=1
ppd_dir=
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt3

# ********************
[turbolinux:any]
code_name=
supported=0
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=
release_date=
notes=
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt3

# ****************************************
[redflag]
index=11
versions=any
display_name=Red Flag Linux
alt_names=
display=0
notes=
package_mgrs=
package_mgr_cmd=
pre_depend_cmd=
post_depend_cmd=
hplip_remove_cmd=
su_sudo=su
ppd_install=ppd
udev_mode_fix=1
ppd_dir=
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt3

# ********************
[redflag:any]
code_name=
supported=0
scan_supported=1
fax_supported=0
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=
release_date=
notes=
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt3

# ****************************************
[ark]
index=16
versions=any
display_name=Ark Linux
alt_names=
display=0
notes=
package_mgrs=
package_mgr_cmd=
pre_depend_cmd=
post_depend_cmd=
hplip_remove_cmd=
su_sudo=su
ppd_install=ppd
udev_mode_fix=1
ppd_dir=
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt3

# ********************
[ark:any]
code_name=
supported=0
scan_supported=1
fax_supported=0
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=
release_date=
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt3

# ****************************************
[sunwah]
index=20
versions=any
display_name=Sun Wah RAYS LX
alt_names=
display=0
notes=
package_mgrs=
package_mgr_cmd=
pre_depend_cmd=
post_depend_cmd=
hplip_remove_cmd=
su_sudo=su
ppd_install=ppd
udev_mode_fix=1
ppd_dir=
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt3

# ********************
[sunwah:any]
code_name=
supported=0
scan_supported=1
fax_supported=0
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=
release_date=
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt3

# ****************************************
[fedora]
index=5
versions=17,18,19,20,21,22,23,24,25,26,27,28,29,30,31
display_name=Fedora
alt_names=Fedora Core
display=1
notes=SELinux must run in permissive mode or it must be disabled for HPLIP to function properly. Please run SELinux in permissive mode or disable it before continuing.
package_mgrs=yum,rpm,up2date
package_mgr_cmd=su -c "yum -y -d 10 -e 1 install $packages_to_install"
pre_depend_cmd=su -c "yum clean all",su -c "yum check-update"
post_depend_cmd=
#scanjet_depend_cmd=su -c "dnf -y -d 10 -e 1 install python2-pip",su -c "dnf -y -d 10 -e 1 install leptonica",su -c "dnf -y -d 10 -e 1 install leptonica-devel",su -c "dnf -y -d 10 -e 1 install tesseract",su -c "dnf -y -d 10 -e 1 install tesseract-devel",su -c "pip2 install tesserocr",su -c "dnf -y -d 10 -e 1 install tesseract-langpack-*",su -c "dnf -y -d 10 -e 1 install zbar-devel",su -c "pip2 install zbar",su -c "pip2 install opencv-python",su -c "pip2 install pypdf2",su -c "pip2 install imutils",su -c "pip2 install pypdfocr",su -c "pip2 install scikit-image",su -c "pip2 install scipy"
scanjet_depend_cmd=su -c "dnf -y -d 10 -e 1 install python-pip",su -c "pip install opencv-python",su -c "pip install pypdf2",su -c "pip install imutils",su -c "dnf -y -d 10 -e 1 install zbar-devel",su -c "dnf update gcc",su -c "dnf -y -d 10 -e 1 install zbar-*",su -c "dnf -y -d 10 -e 1 install ImageMagick*",su -c "dnf -y -d 10 -e 1 install leptonica",su -c "dnf -y -d 10 -e 1 install leptonica-devel",su -c "dnf -y -d 10 -e 1 install tesseract",su -c "dnf -y -d 10 -e 1 install tesseract-devel",su -c "pip install tesserocr",su -c "dnf -y -d 10 -e 1 install tesseract-langpack-*",su -c "dnf -y -d 10 -e 1 install tesseract-osd",,su -c "pip install pypdfocr",su -c "pip install scikit-image",su -c "pip install scipy"
scanjet_py3_depend_cmd=su -c "dnf -y -d 10 -e 1 install python3-pip",su -c "pip3 install opencv-python",su -c "pip3 install pypdf2",su -c "pip3 install imutils",su -c "dnf -y -d 10 -e 1 install ImageMagick*",su -c "dnf -y -d 10 -e 1 install leptonica",su -c "dnf -y -d 10 -e 1 install leptonica-devel",su -c "dnf -y -d 10 -e 1 install tesseract",su -c "dnf -y -d 10 -e 1 install tesseract-devel",su -c "pip3 install tesserocr",su -c "dnf -y -d 10 -e 1 install tesseract-langpack-*",su -c "dnf -y -d 10 -e 1 install tesseract-osd",su -c "pip3 install ocrmypdf",su -c "pip3 install scikit-image",su -c "pip3 install scipy"
#hplip_remove_cmd=su -c "dnf -y -d 10 -e 1 remove hplip"
hplip_remove_cmd=su -c "yum -y -d 10 -e 1 remove hplip"
su_sudo=su
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP

# ********************
[fedora:17]
code_name=Beefy Miracle
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.12.4
release_date=22/05/2012
notes=To complete the install in Fedora you must quit the installer at the printer setup stage, log out, log back in, and run hp-setup.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
policykit=0
native_cups=1
open_mdns_port=/bin/bash ./init-iptables-firewall
pre_depend_cmd=su -c "yum clean all",su -c "yum check-update"

[fedora:17:cups]
packages=cups

[fedora:17:cups-devel]
packages=cups-devel

[fedora:17:gcc]
packages=gcc-c++

[fedora:17:gs]
packages=ghostscript

[fedora:17:libcrypto]
packages=openssl-devel

[fedora:17:libjpeg]
packages=libjpeg-devel

[fedora:17:libnetsnmp-devel]
packages=net-snmp-devel

[fedora:17:libpthread]
packages=glibc-headers

[fedora:17:libtool]
packages=libtool,rpm-build

[fedora:17:libusb]
packages=libusb1-devel

[fedora:17:make]
packages=make

[fedora:17:pil]
packages=python-imaging

[fedora:17:ppdev]
packages=
commands=su -c "/sbin/modprobe ppdev"

[fedora:17:pyqt]
packages=PyQt

[fedora:17:python-devel]
packages=python-devel

[fedora:17:pyqt4]
packages=PyQt4

[fedora:17:pyqt4-dbus]
packages=dbus-python

[fedora:17:python23]
packages=python

[fedora:17:python2X]
packages=python

[fedora:17:reportlab]
packages=python-reportlab

[fedora:17:sane]
packages=sane-backends

[fedora:17:sane-devel]
packages=sane-backends-devel

[fedora:17:scanimage]
packages=sane-frontends

[fedora:17:xsane]
packages=xsane

[fedora:17:python-dbus]
packages=dbus-python,pygobject2

[fedora:17:dbus]
packages=dbus-devel

[fedora:17:cups-image]
packages=cups-devel

[fedora:17:python-notify]
packages=notify-python

[fedora:17:policykit]
packages=polkit,polkit-gnome

[fedora:17:network]
packages=wget

[fedora:17:avahi-utils]
packages=avahi-tools

[fedora:17:automake]
packages=automake

# ********************
[fedora:18]
code_name=Sperical Cow
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.12.10a
release_date=08/01/2013
notes=To complete the install in Fedora you must quit the installer at the printer setup stage, log out, log back in, and run hp-setup.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
policykit=0
native_cups=1
open_mdns_port=/bin/bash ./init-iptables-firewall
pre_depend_cmd=su -c "yum clean all",su -c "yum check-update"

[fedora:18:cups]
packages=cups

[fedora:18:cups-devel]
packages=cups-devel

[fedora:18:gcc]
packages=audit,gcc-c++

[fedora:18:gs]
packages=ghostscript

[fedora:18:libcrypto]
packages=openssl-devel

[fedora:18:libjpeg]
packages=libjpeg-devel

[fedora:18:libnetsnmp-devel]
packages=net-snmp-devel

[fedora:18:libpthread]
packages=glibc-headers

[fedora:18:libtool]
packages=audit,libtool,rpm-build

[fedora:18:libusb]
packages=libusb1-devel

[fedora:18:make]
packages=make

[fedora:18:pil]
packages=python-imaging

[fedora:18:ppdev]
packages=
commands=su -c "/sbin/modprobe ppdev"

[fedora:18:pyqt]
packages=PyQt

[fedora:18:python-devel]
packages=python-devel

[fedora:18:pyqt4]
packages=PyQt4

[fedora:18:pyqt4-dbus]
packages=dbus-python

[fedora:18:python23]
packages=python

[fedora:18:python2X]
packages=python

[fedora:18:reportlab]
packages=python-reportlab

[fedora:18:sane]
packages=sane-backends

[fedora:18:sane-devel]
packages=sane-backends-devel

[fedora:18:scanimage]
packages=sane-frontends

[fedora:18:xsane]
packages=xsane

[fedora:18:python-dbus]
packages=dbus-python,pygobject2

[fedora:18:dbus]
packages=dbus-devel

[fedora:18:cups-image]
packages=cups-devel

[fedora:18:python-notify]
packages=notify-python

[fedora:18:policykit]
packages=polkit,polkit-gnome

[fedora:18:network]
packages=wget

[fedora:18:avahi-utils]
packages=avahi-tools

[fedora:18:automake]
packages=automake

# ****************************************

[fedora:19]
code_name=Schrodinger's Cat
supported=1
packaged_version=3.13.5
release_date=02/07/2013
same_as_version=17



# ****************************************

[fedora:20]
code_name=Heisenbug
supported=1
packaged_version=3.13.9
release_date=12/11/2013
same_as_version=19



# ****************************************

[fedora:21]
code_name=
supported=1
packaged_version=3.14.10
release_date=09/12/2014
same_as_version=17

# ****************************************

[fedora:22]
code_name=
supported=1
scan_supported=1
fax_supported=1
pcard_supported=0
network_supported=1
parallel_supported=0
usb_supported=1
packaged_version=3.15.6
release_date=26/05/2015
notes=To complete the install in Fedora you must quit the installer at the printer setup stage, log out, log back in, and run hp-setup.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
policykit=0
native_cups=1
open_mdns_port=/bin/bash ./init-iptables-firewall
package_mgr_cmd=su -c "dnf -y -d 10 -e 1 install $packages_to_install"
pre_depend_cmd=su -c "dnf check-update"
hplip_remove_cmd=su -c "dnf -y -d 10 -e 1 remove hplip"

[fedora:22:cups]
packages=cups

[fedora:22:cups-devel]
packages=cups-devel

[fedora:22:gcc]
packages=gcc-c++

[fedora:22:gs]
packages=ghostscript

[fedora:22:libcrypto]
packages=openssl-devel

[fedora:22:libjpeg]
packages=libjpeg-devel

[fedora:22:libnetsnmp-devel]
packages=net-snmp-devel

[fedora:22:libpthread]
packages=glibc-headers

[fedora:22:libtool]
packages=libtool,rpm-build

[fedora:22:libusb]
packages=libusb1-devel

[fedora:22:make]
packages=make

[fedora:22:pil]
packages=python-imaging

[fedora:22:ppdev]
packages=
commands=su -c "/sbin/modprobe ppdev"

[fedora:22:pyqt]
packages=PyQt

[fedora:22:python-devel]
packages=python-devel

[fedora:22:pyqt4]
packages=PyQt4

[fedora:22:pyqt4-dbus]
packages=dbus-python

[fedora:22:python2X]
packages=python

[fedora:22:reportlab]
packages=python-reportlab

[fedora:22:sane]
packages=sane-backends

[fedora:22:sane-devel]
packages=sane-backends-devel

[fedora:22:scanimage]
packages=sane-frontends

[fedora:22:xsane]
packages=xsane

[fedora:22:python-dbus]
packages=dbus-python,pygobject2

[fedora:22:dbus]
packages=dbus-devel

[fedora:22:cups-image]
packages=cups-devel

[fedora:22:python-notify]
packages=notify-python

[fedora:22:policykit]
packages=polkit,polkit-gnome

[fedora:22:network]
packages=wget

[fedora:22:avahi-utils]
packages=avahi-tools

[fedora:22:python3X]
packages=python3

[fedora:22:python3-notify2]
packages=PKG_FROM_PIP:notify2

[fedora:22:python3-pyqt4]
packages=python3-PyQt4

[fedora:22:python3-dbus]
packages=python3-dbus,python3-gobject

[fedora:22:python3-xml]
packages=python3-lxml

[fedora:22:python3-devel]
packages=python3-devel

[fedora:22:python3-pil]
packages=python3-pillow

[fedora:22:python3-reportlab]
packages=python3-reportlab

[fedora:22:automake]
packages=automake

# ****************************************

[fedora:23]
code_name=
supported=1
packaged_version=3.15.7
release_date=27/10/2015
same_as_version=22


# ****************************************

[fedora:24]
code-name=
supported=1
packaged_version=3.16.8
release_date=27/08/2016
same_as_version=22

# ****************************************

[fedora:25]
code-name=
supported=1
packaged_version=3.16.11
release_date=23/11/2016
same_as_version=22

# ****************************************

[fedora:26]
code-name=
supported=1
packaged_version=3.17.9
release_date=11/07/2017
same_as_version=22

# ****************************************

[fedora:27]
code_name=
supported=1
scan_supported=1
fax_supported=1
pcard_supported=0
network_supported=1
parallel_supported=0
usb_supported=1
packaged_version=3.18.2
release_date=14/11/2017
notes=To complete the install in Fedora you must quit the installer at the printer setup stage, log out, log back in, and run hp-setup.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
policykit=0
native_cups=1
open_mdns_port=/bin/bash ./init-iptables-firewall
package_mgr_cmd=su -c "dnf -y -d 10 -e 1 install $packages_to_install"
pre_depend_cmd=su -c "dnf check-update"
#scanjet_depend_cmd=su -c "dnf -y -d 10 -e 1 install python2-pip",su -c "dnf -y -d 10 -e 1 install leptonica",su -c "dnf -y -d 10 -e 1 install leptonica-devel",su -c "dnf -y -d 10 -e 1 install tesseract",su -c "dnf -y -d 10 -e 1 install tesseract-devel",su -c "pip2 install tesserocr",su -c "dnf -y -d 10 -e 1 install tesseract-langpack-*",su -c "dnf -y -d 10 -e 1 install zbar-devel",su -c "pip2 install zbar",su -c "pip2 install opencv-python",su -c "pip2 install pypdf2",su -c "pip2 install imutils",su -c "pip2 install pypdfocr",su -c "pip2 install scikit-image",su -c "pip2 install scipy"
#scanjet_py3_depend_cmd=su -c "dnf -y -d 10 -e 1 install python3-pip",su -c "dnf -y -d 10 -e 1 install leptonica",su -c "dnf -y -d 10 -e 1 install leptonica-devel",su -c "dnf -y -d 10 -e 1 install tesseract",su -c "dnf -y -d 10 -e 1 install tesseract-devel",su -c "pip3 install tesserocr",su -c "dnf -y -d 10 -e 1 install tesseract-langpack-*",su -c "pip3 install opencv-python",su -c "pip3 install pypdf2",su -c "pip3 install imutils", su -c "pip3 install ocrmypdf",su -c "pip3 install scikit-image"
hplip_remove_cmd=su -c "dnf -y -d 10 -e 1 remove hplip",su -c "pip3 install scipy"

[fedora:27:cups]
packages=cups

[fedora:27:cups-devel]
packages=cups-devel

[fedora:27:gcc]
packages=gcc-c++

[fedora:27:gs]
packages=ghostscript

[fedora:27:libcrypto]
packages=openssl-devel

[fedora:27:libjpeg]
packages=libjpeg-devel

[fedora:27:libnetsnmp-devel]
packages=net-snmp-devel

[fedora:27:libpthread]
packages=glibc-headers

[fedora:27:libtool]
packages=libtool,rpm-build

[fedora:27:libusb]
packages=libusb1-devel

[fedora:27:make]
packages=make

[fedora:27:pil]
packages=python-imaging

[fedora:27:ppdev]
packages=
commands=su -c "/sbin/modprobe ppdev"

[fedora:27:pyqt]
packages=PyQt

[fedora:27:python-devel]
packages=python-devel

[fedora:27:pyqt4]
packages=PyQt4

[fedora:27:pyqt4-dbus]
packages=dbus-python

[fedora:27:python2X]
packages=python

[fedora:27:reportlab]
packages=python-reportlab

[fedora:27:sane]
packages=sane-backends

[fedora:27:sane-devel]
packages=sane-backends-devel

[fedora:27:scanimage]
packages=sane-frontends

[fedora:27:xsane]
packages=xsane

[fedora:27:python-dbus]
packages=dbus-python,pygobject2

[fedora:27:dbus]
packages=dbus-devel

[fedora:27:cups-image]
packages=cups-devel

[fedora:27:python-notify]
packages=notify-python

[fedora:27:policykit]
packages=polkit,polkit-gnome

[fedora:27:network]
packages=wget

[fedora:27:avahi-utils]
packages=avahi-tools

[fedora:27:python3X]
packages=python3

[fedora:27:python3-notify2]
packages=PKG_FROM_PIP:notify2

[fedora:27:python3-pyqt4]
packages=python3-PyQt4

[fedora:27:python3-dbus]
packages=python3-dbus,python3-gobject

[fedora:27:python3-xml]
packages=python3-lxml

[fedora:27:python3-devel]
packages=python3-devel

[fedora:27:python3-pil]
packages=python3-pillow

[fedora:27:python3-reportlab]
packages=python3-reportlab

[fedora:27:automake]
packages=automake


# ****************************************

[fedora:28]
code_name=
supported=1
scan_supported=1
fax_supported=1
pcard_supported=0
network_supported=1
parallel_supported=0
usb_supported=1
packaged_version=3.18.5
release_date=01/05/2018
notes=To complete the install in Fedora you must quit the installer at the printer setup stage, log out, log back in, and run hp-setup.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
policykit=0
native_cups=1
open_mdns_port=/bin/bash ./init-iptables-firewall
package_mgr_cmd= sudo dnf -y -d 10 -e 1 install $packages_to_install
pre_depend_cmd=sudo dnf check-update
scanjet_depend_cmd=sudo dnf -y -d 10 -e 1 install python-pip,sudo pip install opencv-python,sudo pip install pypdf2,sudo pip install imutils,sudo dnf -y -d 10 -e 1 install zbar-devel,sudo dnf update gcc,sudo dnf -y -d 10 -e 1 install zbar-*,sudo dnf -y -d 10 -e 1 install leptonica,sudo dnf -y -d 10 -e 1 install leptonica-devel,sudo dnf -y -d 10 -e 1 install tesseract,sudo dnf -y -d 10 -e 1 install tesseract-devel,sudo pip install tesserocr,sudo dnf -y -d 10 -e 1 install tesseract-langpack-*,sudo dnf -y -d 10 -e 1 install tesseract-osd, sudo pip install pypdfocr,sudo pip install scikit-image,sudo pip install scipy
scanjet_py3_depend_cmd=sudo dnf -y -d 10 -e 1 install python3-pip,sudo pip3 install opencv-python,sudo pip3 install pypdf2,sudo pip3 install imutils,sudo dnf -y -d 10 -e 1 install leptonica,sudo dnf -y -d 10 -e 1 install leptonica-devel,sudo dnf -y -d 10 -e 1 install tesseract,sudo dnf -y -d 10 -e 1 install tesseract-devel,sudo pip3 install tesserocr,sudo dnf -y -d 10 -e 1 install tesseract-langpack-*,sudo dnf -y -d 10 -e 1 install tesseract-osd,sudo pip3 install ocrmypdf,sudo pip3 install scikit-image,sudo pip3 install scipy
hplip_remove_cmd=sudo dnf -y -d 10 -e 1 remove hplip

[fedora:28:cups]
packages=cups

[fedora:28:cups-devel]
packages=cups-devel

[fedora:28:gcc]
packages=gcc-c++

[fedora:28:gs]
packages=ghostscript

[fedora:28:libcrypto]
packages=openssl-devel

[fedora:28:libjpeg]
packages=libjpeg-devel

[fedora:28:libnetsnmp-devel]
packages=net-snmp-devel

[fedora:28:libpthread]
packages=glibc-headers

[fedora:28:libtool]
packages=libtool,rpm-build

[fedora:28:libusb]
packages=libusb1-devel

[fedora:28:make]
packages=make

[fedora:28:pil]
packages=python-imaging

[fedora:28:ppdev]
packages=
commands=sudo /sbin/modprobe ppdev

[fedora:28:pyqt]
packages=PyQt

[fedora:28:python-devel]
packages=python-devel

[fedora:28:pyqt4]
packages=PyQt4

[fedora:28:pyqt4-dbus]
packages=dbus-python

[fedora:28:python2X]
packages=python

[fedora:28:reportlab]
packages=python-reportlab

[fedora:28:sane]
packages=sane-backends

[fedora:28:sane-devel]
packages=sane-backends-devel

[fedora:28:scanimage]
packages=sane-frontends

[fedora:28:xsane]
packages=xsane

[fedora:28:python-dbus]
packages=dbus-python,pygobject2

[fedora:28:dbus]
packages=dbus-devel

[fedora:28:cups-image]
packages=cups-devel

[fedora:28:python-notify]
packages=notify-python

[fedora:28:policykit]
packages=polkit,polkit-gnome

[fedora:28:network]
packages=wget

[fedora:28:avahi-utils]
packages=avahi-tools

[fedora:28:python3X]
packages=python3

[fedora:28:python3-notify2]
packages=PKG_FROM_PIP:notify2

[fedora:28:python3-pyqt4]
packages=python3-PyQt4

[fedora:28:python3-dbus]
packages=python3-dbus,python3-gobject

[fedora:28:python3-xml]
packages=python3-lxml

[fedora:28:python3-devel]
packages=python3-devel

[fedora:28:python3-pil]
packages=python3-pillow

[fedora:28:python3-reportlab]
packages=python3-reportlab

[fedora:28:automake]
packages=automake

# ****************************************

[fedora:29]
code_name=
supported=1
scan_supported=1
fax_supported=1
pcard_supported=0
network_supported=1
parallel_supported=0
usb_supported=1
packaged_version=3.19.1
release_date=30/10/2018
notes=To complete the install in Fedora you must quit the installer at the printer setup stage, log out, log back in, and run hp-setup.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
policykit=0
native_cups=1
open_mdns_port=/bin/bash ./init-iptables-firewall
package_mgr_cmd= sudo dnf -y -d 10 -e 1 install $packages_to_install
pre_depend_cmd=sudo dnf check-update
scanjet_depend_cmd=sudo dnf -y -d 10 -e 1 install python-pip,sudo pip install opencv-python,sudo pip install pypdf2,sudo pip install imutils,sudo dnf -y -d 10 -e 1 install zbar-devel,sudo dnf update gcc,sudo dnf -y -d 10 -e 1 install zbar-*,sudo dnf -y -d 10 -e 1 install leptonica,sudo dnf -y -d 10 -e 1 install leptonica-devel,sudo dnf -y -d 10 -e 1 install tesseract,sudo dnf -y -d 10 -e 1 install tesseract-devel,sudo pip install tesserocr,sudo dnf -y -d 10 -e 1 install tesseract-langpack-*,sudo dnf -y -d 10 -e 1 install tesseract-osd,sudo dnf -y -d 10 -e 1 install qpdf,sudo pip install pypdfocr,sudo pip install scikit-image,sudo pip install scipy
scanjet_py3_depend_cmd=sudo dnf -y -d 10 -e 1 install python3-pip,sudo pip3 install opencv-python,sudo pip3 install pypdf2,sudo pip3 install imutils,sudo dnf -y -d 10 -e 1 install leptonica,sudo dnf -y -d 10 -e 1 install leptonica-devel,sudo dnf -y -d 10 -e 1 install tesseract,sudo dnf -y -d 10 -e 1 install tesseract-devel,sudo pip3 install tesserocr,sudo dnf -y -d 10 -e 1 install tesseract-langpack-*,sudo dnf -y -d 10 -e 1 install tesseract-osd,sudo dnf -y -d 10 -e 1 install qpdf,sudo pip3 install ocrmypdf,sudo pip3 install scikit-image,sudo pip3 install scipy
hplip_remove_cmd=sudo dnf -y -d 10 -e 1 remove hplip

[fedora:29:cups]
packages=cups

[fedora:29:cups-devel]
packages=cups-devel

[fedora:29:gcc]
packages=gcc-c++

[fedora:29:gs]
packages=ghostscript

[fedora:29:libcrypto]
packages=openssl-devel

[fedora:29:libjpeg]
packages=libjpeg-devel

[fedora:29:libnetsnmp-devel]
packages=net-snmp-devel

[fedora:29:libpthread]
packages=glibc-headers

[fedora:29:libtool]
packages=libtool,rpm-build

[fedora:29:libusb]
packages=libusb1-devel

[fedora:29:make]
packages=make

[fedora:29:pil]
packages=python-imaging

[fedora:29:ppdev]
packages=
commands=sudo /sbin/modprobe ppdev

[fedora:29:pyqt]
packages=PyQt

[fedora:29:python-devel]
packages=python-devel

[fedora:29:pyqt4]
packages=PyQt4

[fedora:29:pyqt4-dbus]
packages=dbus-python

[fedora:29:python2X]
packages=python

[fedora:29:reportlab]
packages=python-reportlab

[fedora:29:sane]
packages=sane-backends

[fedora:29:sane-devel]
packages=sane-backends-devel

[fedora:29:scanimage]
packages=sane-frontends

[fedora:29:xsane]
packages=xsane

[fedora:29:python-dbus]
packages=dbus-python,pygobject2

[fedora:29:dbus]
packages=dbus-devel

[fedora:29:cups-image]
packages=cups-devel

[fedora:29:python-notify]
packages=notify-python

[fedora:29:policykit]
packages=polkit,polkit-gnome

[fedora:29:network]
packages=wget

[fedora:29:avahi-utils]
packages=avahi-tools

[fedora:29:python3X]
packages=python3

[fedora:29:python3-notify2]
packages=PKG_FROM_PIP:notify2

[fedora:29:python3-pyqt4]
packages=python3-PyQt4

[fedora:29:python3-dbus]
packages=python3-dbus,python3-gobject

[fedora:29:python3-xml]
packages=python3-lxml

[fedora:29:python3-devel]
packages=python3-devel

[fedora:29:python3-pil]
packages=python3-pillow

[fedora:29:python3-reportlab]
packages=python3-reportlab

[fedora:29:automake]
packages=automake

# ****************************************

[fedora:30]
code_name=
supported=1
scan_supported=1
fax_supported=1
pcard_supported=0
network_supported=1
parallel_supported=0
usb_supported=1
packaged_version=3.19.1
release_date=30/10/2018
notes=To complete the install in Fedora you must quit the installer at the printer setup stage, log out, log back in, and run hp-setup.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
policykit=0
native_cups=1
open_mdns_port=/bin/bash ./init-iptables-firewall
package_mgr_cmd= sudo dnf -y -d 10 -e 1 install $packages_to_install
pre_depend_cmd=sudo dnf check-update
scanjet_depend_cmd=sudo dnf -y -d 10 -e 1 install python-pip,sudo pip install opencv-python,sudo pip install pypdf2,sudo pip install imutils,sudo dnf -y -d 10 -e 1 install zbar-devel,sudo dnf update gcc,sudo dnf -y -d 10 -e 1 install zbar-*,sudo dnf -y -d 10 -e 1 install leptonica,sudo dnf -y -d 10 -e 1 install leptonica-devel,sudo dnf -y -d 10 -e 1 install tesseract,sudo dnf -y -d 10 -e 1 install tesseract-devel,sudo pip install tesserocr,sudo dnf -y -d 10 -e 1 install tesseract-langpack-*,sudo dnf -y -d 10 -e 1 install tesseract-osd,sudo dnf -y -d 10 -e 1 install qpdf,sudo pip install pypdfocr,sudo pip install scikit-image,sudo pip install scipy
scanjet_py3_depend_cmd=sudo dnf -y -d 10 -e 1 install python3-pip,sudo pip3 install opencv-python,sudo pip3 install pypdf2,sudo pip3 install imutils,sudo dnf -y -d 10 -e 1 install leptonica,sudo dnf -y -d 10 -e 1 install leptonica-devel,sudo dnf -y -d 10 -e 1 install tesseract,sudo dnf -y -d 10 -e 1 install tesseract-devel,sudo pip3 install tesserocr,sudo dnf -y -d 10 -e 1 install tesseract-langpack-*,sudo dnf -y -d 10 -e 1 install tesseract-osd,sudo dnf -y -d 10 -e 1 install qpdf,sudo pip3 install ocrmypdf,sudo pip3 install scikit-image,sudo pip3 install scipy
hplip_remove_cmd=sudo dnf -y -d 10 -e 1 remove hplip

[fedora:30:cups]
packages=cups

[fedora:30:cups-devel]
packages=cups-devel

[fedora:30:gcc]
packages=gcc-c++

[fedora:30:gs]
packages=ghostscript

[fedora:30:libcrypto]
packages=openssl-devel

[fedora:30:libjpeg]
packages=libjpeg-devel

[fedora:30:libnetsnmp-devel]
packages=net-snmp-devel

[fedora:30:libpthread]
packages=glibc-headers

[fedora:30:libtool]
packages=libtool,rpm-build

[fedora:30:libusb]
packages=libusb1-devel

[fedora:30:make]
packages=make

[fedora:30:pil]
packages=python-imaging

[fedora:30:ppdev]
packages=
commands=sudo /sbin/modprobe ppdev

[fedora:30:pyqt]
packages=PyQt

[fedora:30:python-devel]
packages=python-devel

[fedora:30:pyqt4]
packages=PyQt4

[fedora:30:pyqt4-dbus]
packages=dbus-python

[fedora:30:python2X]
packages=python

[fedora:30:reportlab]
packages=python-reportlab

[fedora:30:sane]
packages=sane-backends

[fedora:30:sane-devel]
packages=sane-backends-devel

[fedora:30:scanimage]
packages=sane-frontends

[fedora:30:xsane]
packages=xsane

[fedora:30:python-dbus]
packages=dbus-python,pygobject2

[fedora:30:dbus]
packages=dbus-devel

[fedora:30:cups-image]
packages=cups-devel

[fedora:30:python-notify]
packages=notify-python

[fedora:30:policykit]
packages=polkit,polkit-gnome

[fedora:30:network]
packages=wget

[fedora:30:avahi-utils]
packages=avahi-tools

[fedora:30:python3X]
packages=python3

[fedora:30:python3-notify2]
packages=PKG_FROM_PIP:notify2

[fedora:30:python3-pyqt4]
packages=python3-PyQt4

[fedora:30:python3-dbus]
packages=python3-dbus,python3-gobject

[fedora:30:python3-xml]
packages=python3-lxml

[fedora:30:python3-devel]
packages=python3-devel

[fedora:30:python3-pil]
packages=python3-pillow

[fedora:30:python3-reportlab]
packages=python3-reportlab

[fedora:30:automake]
packages=automake

# ****************************************

[fedora:31]
code_name=
supported=1
scan_supported=1
fax_supported=1
pcard_supported=0
network_supported=1
parallel_supported=0
usb_supported=1
packaged_version=3.19.8
release_date=30/10/2019
notes=To complete the install in Fedora you must quit the installer at the printer setup stage, log out, log back in, and run hp-setup.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
policykit=0
native_cups=1
open_mdns_port=/bin/bash ./init-iptables-firewall
package_mgr_cmd= sudo dnf -y -d 10 -e 1 install $packages_to_install
pre_depend_cmd=sudo dnf check-update
scanjet_depend_cmd=sudo dnf -y -d 10 -e 1 install python-pip,sudo pip install opencv-python,sudo pip install pypdf2,sudo pip install imutils,sudo dnf -y -d 10 -e 1 install zbar-devel,sudo dnf update gcc,sudo dnf -y -d 10 -e 1 install zbar-*,sudo dnf -y -d 10 -e 1 install leptonica,sudo dnf -y -d 10 -e 1 install leptonica-devel,sudo dnf -y -d 10 -e 1 install tesseract,sudo dnf -y -d 10 -e 1 install tesseract-devel,sudo pip install tesserocr,sudo dnf -y -d 10 -e 1 install tesseract-langpack-*,sudo dnf -y -d 10 -e 1 install tesseract-osd,sudo dnf -y -d 10 -e 1 install qpdf,sudo pip install pypdfocr,sudo pip install scikit-image,sudo pip install scipy
scanjet_py3_depend_cmd=sudo dnf -y -d 10 -e 1 install python3-pip,sudo pip3 install opencv-python,sudo pip3 install pypdf2,sudo pip3 install imutils,sudo dnf -y -d 10 -e 1 install leptonica,sudo dnf -y -d 10 -e 1 install leptonica-devel,sudo dnf -y -d 10 -e 1 install tesseract,sudo dnf -y -d 10 -e 1 install tesseract-devel,sudo pip3 install tesserocr,sudo dnf -y -d 10 -e 1 install tesseract-langpack-*,sudo dnf -y -d 10 -e 1 install tesseract-osd,sudo dnf -y -d 10 -e 1 install qpdf,sudo pip3 install ocrmypdf,sudo pip3 install scikit-image,sudo pip3 install scipy
hplip_remove_cmd=sudo dnf -y -d 10 -e 1 remove hplip

[fedora:31:cups]
packages=cups

[fedora:31:cups-devel]
packages=cups-devel

[fedora:31:gcc]
packages=gcc-c++

[fedora:31:gs]
packages=ghostscript

[fedora:31:libcrypto]
packages=openssl-devel

[fedora:31:libjpeg]
packages=libjpeg-devel

[fedora:31:libnetsnmp-devel]
packages=net-snmp-devel

[fedora:31:libpthread]
packages=glibc-headers

[fedora:31:libtool]
packages=libtool,rpm-build

[fedora:31:libusb]
packages=libusb1-devel

[fedora:31:make]
packages=make

[fedora:31:pil]
packages=python-imaging

[fedora:31:ppdev]
packages=
commands=sudo /sbin/modprobe ppdev

[fedora:31:pyqt]
packages=PyQt

[fedora:31:python-devel]
packages=python-devel

[fedora:31:pyqt4]
packages=PyQt4

[fedora:31:pyqt4-dbus]
packages=dbus-python

[fedora:31:python2X]
packages=python

[fedora:31:reportlab]
packages=python-reportlab

[fedora:31:sane]
packages=sane-backends

[fedora:31:sane-devel]
packages=sane-backends-devel

[fedora:31:scanimage]
packages=sane-frontends

[fedora:31:xsane]
packages=xsane

[fedora:31:python-dbus]
packages=dbus-python,pygobject2

[fedora:31:dbus]
packages=dbus-devel

[fedora:31:cups-image]
packages=cups-devel

[fedora:31:python-notify]
packages=notify-python

[fedora:31:policykit]
packages=polkit,polkit-gnome

[fedora:31:network]
packages=wget

[fedora:31:avahi-utils]
packages=avahi-tools

[fedora:31:python3X]
packages=python3

[fedora:31:python3-notify2]
packages=PKG_FROM_PIP:notify2

[fedora:31:python3-pyqt4]
packages=python3-PyQt4

[fedora:31:python3-dbus]
packages=python3-dbus,python3-gobject

[fedora:31:python3-xml]
packages=python3-lxml

[fedora:31:python3-devel]
packages=python3-devel

[fedora:31:python3-pil]
packages=python3-pillow

[fedora:31:python3-reportlab]
packages=python3-reportlab

[fedora:31:automake]
packages=automake

# ****************************************

[linspire]
index=15
versions=5.0
display_name=Linspire
alt_names=
display=0
notes=The installer will uncomment out several Debian repositories to complete the installation.  This may pull in packages that are incompatible with Linspire and may cause CNR to stop working.
package_mgrs=apt-get
package_mgr_cmd=su -c "apt-get install --yes $packages_to_install"
pre_depend_cmd=su -c "cp -f /etc/apt/sources.list /etc/apt/sources.hplip,echo deb ftp://mirrors.kernel.org/debian/ sid main contrib non-free | sudo tee -a /etc/apt/sources.list,echo deb-src ftp://mirrors.kernel.org/debian/ sid main contrib non-free | sudo tee -a /etc/apt/sources.list,su -c "apt-get update"
post_depend_cmd=
hplip_remove_cmd=su -c "apt-get remove hplip hpijs"
su_sudo=su
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP

# ********************
[linspire:5.0]
code_name=Linspire
supported=0
scan_supported=1
fax_supported=0
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=
release_date=
notes=
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt3

# ****************************************
[rhel]
index=7
versions=5.0,6.0,7.0,7.1,7.2,7.3,7.6,8.0
display_name=Red Hat Enterprise Linux
alt_names=red hat enterprise linux
display=1
notes=
package_mgrs=yum,rpm,up2date,gpk-update-viewer
#package_mgr_cmd=su -c 'rpm install $packages_to_install'
package_mgr_cmd=su -c 'yum -y -d 10 -e 1 install $packages_to_install'
pre_depend_cmd=su -c 'yum list update'
post_depend_cmd=
hplip_remove_cmd=su -c 'rpm -ev hplipfull'
su_sudo=su
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP

# ********************
[rhel:5.0]
code_name=
supported=0
libusb01=1
scan_supported=1
fax_supported=0
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=1.6.7
release_date=
notes=
ppd_install=
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt3
package_available=1
package_arch=i386,x86_64


[rhel:5.0:cups]
packages=cups

[rhel:5.0:cups-devel]
packages=cups-devel

[rhel:5.0:gcc]
packages=gcc-c++

[rhel:5.0:gs]
packages=ghostscript

[rhel:5.0:libcrypto]
packages=openssl-devel

[rhel:5.0:libjpeg]
packages=libjpeg-devel

[rhel:5.0:libnetsnmp-devel]
packages=net-snmp-devel

[rhel:5.0:libpthread]
packages=glibc-headers

[rhel:5.0:libtool]
packages=libtool

[rhel:5.0:libusb]
packages=libusb1

[rhel:5.0:make]
packages=make

[rhel:5.0:pil]
packages=python-imaging

[rhel:5.0:ppdev]
packages=

[rhel:5.0:pyqt]
packages=PyQt

[rhel:5.0:python-devel]
packages=python-devel

[rhel:5.0:pyqt4]
packages=PyQt4

[rhel:5.0:pyqt4-dbus]
packages=dbus-python

[rhel:5.0:python23]
packages=python

[rhel:5.0:python2X]
packages=python

[rhel:5.0:reportlab]
packages=python-reportlab

[rhel:5.0:sane]
packages=sane-backends

[rhel:5.0:sane-devel]
packages=sane-backends-devel

[rhel:5.0:scanimage]
packages=sane-frontends

[rhel:5.0:xsane]
packages=xsane

[rhel:5.0:python-dbus]
packages=dbus-python,pygobject2

[rhel:5.0:dbus]
packages=dbus-devel

[rhel:5.0:cups-image]
packages=cups-devel

[rhel:5.0:python-notify]
packages=notify-python

[rhel:5.0:policykit]
packages=polkit,polkit-gnome

[rhel:5.0:network]
packages=wget

[rhel:5.0:avahi-utils]
packages=avahi-tools

[rhel:5.0:automake]
packages=automake1.11

# ********************
[rhel:6.0]
code_name=Santiago
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=1.6.7
release_date=
notes=
ppd_install=
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
package_available=1
package_arch=i686,x86_64
native_cups=1
libusb01=1

[rhel:6.0:cups]
packages=cups

[rhel:6.0:cups-devel]
packages=cups-devel

[rhel:6.0:gcc]
packages=gcc-c++

[rhel:6.0:gs]
packages=ghostscript

[rhel:6.0:libcrypto]
packages=openssl-devel

[rhel:6.0:libjpeg]
packages=libjpeg-devel

[rhel:6.0:libnetsnmp-devel]
packages=net-snmp-devel

[rhel:6.0:libpthread]
packages=glibc-headers

[rhel:6.0:libtool]
packages=libtool

[rhel:6.0:libusb]
packages=libusb1

[rhel:6.0:make]
packages=make

[rhel:6.0:pil]
packages=python-imaging

[rhel:6.0:ppdev]
packages=

[rhel:6.0:pyqt]
packages=PyQt

[rhel:6.0:python-devel]
packages=python-devel

[rhel:6.0:pyqt4]
packages=PyQt4

[rhel:6.0:pyqt4-dbus]
packages=dbus-python

[rhel:6.0:python23]
packages=python

[rhel:6.0:python2X]
packages=python

[rhel:6.0:reportlab]
packages=python-reportlab

[rhel:6.0:sane]
packages=sane-backends

[rhel:6.0:sane-devel]
packages=sane-backends-devel

[rhel:6.0:scanimage]
packages=sane-frontends

[rhel:6.0:xsane]
packages=xsane

[rhel:6.0:python-dbus]
packages=dbus-python,pygobject2

[rhel:6.0:dbus]
packages=dbus-devel

[rhel:6.0:cups-image]
packages=cups-devel

[rhel:6.0:python-notify]
packages=notify-python

[rhel:6.0:policykit]
packages=polkit,polkit-gnome

[rhel:6.0:network]
packages=wget

[rhel:6.0:avahi-utils]
packages=avahi-tools

[rhel:6.0:automake]
packages=automake1.11

# ****************************************
[rhel:7.0]
code_name=Maipo
packaged_version=3.13.7
release_date=10/06/2014
same_as_version=6.0

# ****************************************
[rhel:7.1]
packaged_version=3.14.7
release_date=05/03/2015
same_as_version=6.0

# ****************************************
[rhel:7.2]
packaged_version=3.14.7
release_date=21/09/2015
same_as_version=6.0

# ****************************************
[rhel:7.3]
packaged_version=3.17.9
release_date=03/11/2016
same_as_version=6.0

# ****************************************
[rhel:7.6]
packaged_version=3.19.3
release_date=31/11/2018
same_as_version=6.0


# ****************************************
[rhel:8.0]
code_name=Ootpa
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.19.8
release_date=
notes=
ppd_install=
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt5
package_available=1
package_arch=x86_64
native_cups=1
libusb01=1

[rhel:8:0:cups]
packages=cups

[rhel:8:0:cups-devel]
packages=cups-devel

[rhel:8:0:gcc]
packages=gcc-c++

[rhel:8:0:gs]
packages=ghostscript

[rhel:8:0:libcrypto]
packages=openssl-devel

[rhel:8:0:libjpeg]
packages=libjpeg-devel

[rhel:8:0:libnetsnmp-devel]
packages=net-snmp-devel

[rhel:8:0:libpthread]
packages=glibc-headers

[rhel:8:0:libtool]
packages=libtool

[rhel:8:0:libusb]
packages=libusb1

[rhel:8:0:make]
packages=make

[rhel:8:0:pil]
packages=python-imaging

[rhel:8:0:ppdev]
packages=

[rhel:8:0:python3-devel]
packages=python3-devel

[rhel:8:0:pyqt5]
packages=python3-qt5

[rhel:8:0:pyqt5-dbus]
packages=python3-dbus.mainloop.pyqt5

[rhel:8:0:python36]
packages=python

[rhel:8:0:python3X]
packages=python

[rhel:8:0:reportlab]
packages=python-reportlab

[rhel:8:0:sane]
packages=sane-backends

[rhel:8:0:sane-devel]
packages=sane-backends-devel

[rhel:8:0:scanimage]
packages=sane-frontends

[rhel:8:0:xsane]
packages=xsane

[rhel:8:0:python3-dbus]
packages=python3-dbus

[rhel:8:0:dbus]
packages=dbus-devel

[rhel:8:0:cups-image]
packages=cups-devel

[rhel:8:0:python-notify]
packages=notify-python

[rhel:8:0:policykit]
packages=polkit,polkit-gnome

[rhel:8:0:network]
packages=wget

[rhel:8:0:avahi-utils]
packages=avahi-tools

[rhel:8:0:automake]
packages=automake1.11

# ****************************************
[slackware]
index=8
versions=9.0,9.1,10.0,10.1,10.2,11,12,12.1
display_name=Slackware Linux
alt_names=
display=0
notes=
package_mgrs=
package_mgr_cmd=
pre_depend_cmd=
post_depend_cmd=
hplip_remove_cmd=
su_sudo=su
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP

# ********************
[slackware:9.0]
code_name=
supported=0
scan_supported=0
fax_supported=0
pcard_supported=0
network_supported=0
parallel_supported=0
usb_supported=0
packaged_version=
release_date=2003-3-19
notes=
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=none

# ********************
[slackware:9.1]
code_name=
supported=0
scan_supported=0
fax_supported=0
pcard_supported=0
network_supported=0
parallel_supported=0
usb_supported=0
packaged_version=
release_date=2003-9-26
notes=
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=none

# ********************
[slackware:10.0]
code_name=
supported=0
scan_supported=0
fax_supported=0
pcard_supported=0
network_supported=0
parallel_supported=0
usb_supported=0
packaged_version=
release_date=2004-6-23
notes=
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=none

# ********************
[slackware:10.1]
code_name=
supported=0
scan_supported=0
fax_supported=0
pcard_supported=0
network_supported=0
parallel_supported=0
usb_supported=0
packaged_version=
release_date=2005-2-2
notes=
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=none

# ********************
[slackware:10.2]
code_name=
supported=0
scan_supported=0
fax_supported=0
pcard_supported=0
network_supported=0
parallel_supported=0
usb_supported=0
packaged_version=
release_date=2005-9-14
notes=
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=none

# ********************
[slackware:11]
code_name=
supported=0
scan_supported=0
fax_supported=0
pcard_supported=0
network_supported=0
parallel_supported=0
usb_supported=0
packaged_version=1.6.9
release_date=
notes=
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=none

# ********************
[slackware:12]
code_name=
supported=0
scan_supported=0
fax_supported=0
pcard_supported=0
network_supported=0
parallel_supported=0
usb_supported=0
packaged_version=1.7.4a
release_date=
notes=
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=none

# ********************
[slackware:12.1]
code_name=
supported=0
scan_supported=0
fax_supported=0
pcard_supported=0
network_supported=0
parallel_supported=0
usb_supported=0
packaged_version=2.8.4
release_date=
notes=
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=none

# ****************************************
[centos]
index=23
versions=any
display_name=CentOS
alt_names=
display=0
notes=
package_mgrs=pup,yum,rpm
package_mgr_cmd=su -c 'yum -y -d 10 -e 1 install $packages_to_install'
pre_depend_cmd=su -c 'yum list update'
post_depend_cmd=
hplip_remove_cmd=
su_sudo=su
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP

# ********************
[centos:any]
code_name=
supported=0
scan_supported=1
fax_supported=0
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
libusb01=1
udev_sysfs_rule=1
packaged_version=
release_date=
notes=
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt3


[centos:any:cups]
packages=cups

[centos:any:cups-devel]
packages=cups-devel

[centos:any:cups-image]
packages=cups-devel

[centos:any:gcc]
packages=gcc-c++

[centos:any:gs]
packages=ghostscript

[centos:any:libcrypto]
packages=openssl-devel

[centos:any:libjpeg]
packages=libjpeg-devel

[centos:any:libnetsnmp-devel]
packages=net-snmp-devel

[centos:any:libpthread]
packages=glibc-headers

[centos:any:libtool]
packages=libtool

[centos:any:libusb]
packages=libusb1-devel

[centos:any:make]
packages=make

[centos:any:pil]
packages=python-imaging,python-imaging-devel

[centos:any:ppdev]
packages=
commands=su -c "modprobe ppdev",su -c cp -f /etc/modules /etc/modules.hplip,echo ppdev | su -c tee -a /etc/modules

[centos:any:pyqt]
packages=PyQt,PyQt-devel

[centos:any:python-devel]
packages=python-devel,PyXML

[centos:any:pyqt4]
packages=PyQt4

[centos:any:pyqt4-dbus]
packages=pygobject2

[centos:any:python23]
packages=python

[centos:any:python2X]
packages=python

[centos:any:reportlab]
packages=python-reportlab

[centos:any:sane]
packages=sane-backends

[centos:any:sane-devel]
packages=sane-backends-devel

[centos:any:scanimage]
packages=sane-frontends

[centos:any:xsane]
packages=xsane

[centos:any:cups-ddk]
packages=

[centos:any:python-dbus]
packages=dbus-python,policycoreutils-gui

[centos:any:python-ctypes]
packages=

[centos:any:python-notify]
packages=notify-python

[centos:any:dbus]
packages=dbus-devel

[centos:any:network]
packages=wget

[centos:any:avahi-utils]
packages=avahi-tools

[centos:any:automake]
packages=automake1.11

# ****************************************
[gentoo]
index=9
versions=any
display_name=Gentoo Linux
alt_names=
display=0
notes=
package_mgrs=
package_mgr_cmd=
pre_depend_cmd=
post_depend_cmd=
hplip_remove_cmd=
su_sudo=su
ppd_install=ppd
udev_mode_fix=1
ppd_dir=
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP

# ********************
[gentoo:any]
code_name=
supported=0
scan_supported=0
fax_supported=0
pcard_supported=0
network_supported=0
parallel_supported=0
usb_supported=0
packaged_version=
release_date=
notes=
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=none


# ****************************************
[pclinuxos]
index=17
versions=2006.0,2006,2007.0,2007,2008.0,2008,2009,2009.0
display_name=PCLinuxOS
alt_names=
display=1
notes=Please enable all the available repositories before continuing or the install will fail.
package_mgrs=apt-get,synaptic
package_mgr_cmd=su -c "apt-get install --yes $packages_to_install"
pre_install_cmd=su - -c "/etc/init.d/cups restart",su -c "touch /etc/security/console.perms.d/60-hplip.perms && echo '<usb>=/dev/usb/dabusb* /dev/usb/mdc800* /dev/usb/rio500 /dev/ttyUSB*' | tee /etc/security/console.perms.d/60-hplip.perms"
pre_depend_cmd=su -c "apt-get update"
post_depend_cmd=
hplip_remove_cmd=su -c "apt-get remove --yes hplip hpijs"
su_sudo=su
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
libusb01=1

# ********************
[pclinuxos:2006.0]
code_name=Texstar
supported=0
scan_supported=1
fax_supported=0
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=
release_date=
libusb01=1
notes=
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4

[pclinuxos:2006.0:cups]
packages=libcups2

[pclinuxos:2006.0:cups-devel]
packages=libcups2-devel

[pclinuxos:2006.0:gcc]
packages=gcc-c++

[pclinuxos:2006.0:gs]
packages=ghostscript

[pclinuxos:2006.0:libcrypto]
packages=openssl

[pclinuxos:2006.0:libjpeg]
packages=libjpeg62-devel

[pclinuxos:2006.0:libnetsnmp-devel]
packages=libnet-snmp5-devel

[pclinuxos:2006.0:libpthread]
packages=glibc

[pclinuxos:2006.0:libtool]
packages=libtool

[pclinuxos:2006.0:libusb]
packages=libusb-devel

[pclinuxos:2006.0:make]
packages=make

[pclinuxos:2006.0:pil]
packages=python-imaging

[pclinuxos:2006.0:ppdev]
packages=
commands=su -c "modprobe ppdev",su -c cp -f /etc/modules /etc/modules.hplip,echo ppdev | su -c tee -a /etc/modules

[pclinuxos:2006.0:pyqt]
packages=pyqt

[pclinuxos:2006.0:python-devel]
packages=python-devel

[pclinuxos:2006.0:pyqt4]
packages=PyQt4

[pclinuxos:2006.0:pyqt4-dbus]
packages=dbus-python

[pclinuxos:2006.0:python23]
packages=python

[pclinuxos:2006.0:python2X]
packages=python

[pclinuxos:2006.0:reportlab]
packages=python-reportlab

[pclinuxos:2006.0:sane]
packages=sane-frontends

[pclinuxos:2006.0:sane-devel]
packages=sane-devel

[pclinuxos:2006.0:scanimage]
packages=sane-frontends

[pclinuxos:2006.0:xsane]
packages=xsane

[pclinuxos:2006.0:cups-ddk]
packages=

[pclinuxos:2006.0:python-dbus]
# packages=dbus-python,libdbus-1_3-devel,python-gobject

[pclinuxos:2006.0:python-ctypes]
# packages=python-ctypes

[pclinuxos:2006.0:cups-image]
packages=libcups2-devel

[pclinuxos:2006.0:network]
packages=wget

[pclinuxos:2006.0:avahi-utils]
packages=avahi

[pclinuxos:2006.0:automake]
packages=automake1.11

# ********************
[pclinuxos:2006]
same_as_version=2006.0

# ********************
[pclinuxos:2007.0]
code_name=
supported=0
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=2.7.10
release_date=
notes=
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
libusb01=1

[pclinuxos:2007.0:cups]
packages=libcups2

[pclinuxos:2007.0:cups-devel]
packages=libcups2-devel

[pclinuxos:2007.0:gcc]
packages=gcc-c++

[pclinuxos:2007.0:gs]
packages=ghostscript

[pclinuxos:2007.0:libcrypto]
packages=openssl

[pclinuxos:2007.0:libjpeg]
packages=libjpeg62-devel

[pclinuxos:2007.0:libnetsnmp-devel]
packages=libnet-snmp10-devel

[pclinuxos:2007.0:libpthread]
packages=glibc

[pclinuxos:2007.0:libtool]
packages=libtool

[pclinuxos:2007.0:libusb]
packages=libusb-devel

[pclinuxos:2007.0:make]
packages=make

[pclinuxos:2007.0:pil]
packages=python-imaging

[pclinuxos:2007.0:ppdev]
packages=
commands=su -c "modprobe ppdev",su -c cp -f /etc/modules /etc/modules.hplip,echo ppdev | su -c tee -a /etc/modules

[pclinuxos:2007.0:pyqt]
packages=pyqt

[pclinuxos:2007.0:python-devel]
packages=libpython2.4-devel

[pclinuxos:2007.0:pyqt4]
packages=PyQt4

[pclinuxos:2007.0:pyqt4-dbus]
packages=dbus-python

[pclinuxos:2007.0:python23]
packages=python

[pclinuxos:2007.0:python2X]
packages=python

[pclinuxos:2007.0:reportlab]
packages=python-reportlab

[pclinuxos:2007.0:sane]
packages=sane-frontends

[pclinuxos:2007.0:sane-devel]
packages=libsane1-devel

[pclinuxos:2007.0:scanimage]
packages=sane-frontends

[pclinuxos:2007.0:xsane]
packages=xsane

[pclinuxos:2007.0:cups-ddk]
# packages=cupsddk,cupsddk-drivers

[pclinuxos:2007.0:python-dbus]
packages=dbus-python,python-gobject

[pclinuxos:2007.0:dbus]
packages=libdbus-1_3-devel

[pclinuxos:2007.0:python-ctypes]
packages=python-ctypes

[pclinuxos:2007.0:cups-image]
packages=libcups2-devel

[pclinuxos:2007.0:network]
packages=wget

[pclinuxos:2007.0:avahi-utils]
packages=avahi

[pclinuxos:2007.0:automake]
packages=automake1.11

# ********************
[pclinuxos:2007]
same_as_version=2007.0

# ********************
[pclinuxos:2008.0]
code_name=
supported=0
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=2.7.10
release_date=
notes=
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
libusb01=1

[pclinuxos:2008.0:cups]
packages=libcups2

[pclinuxos:2008.0:cups-devel]
packages=libcups2-devel

[pclinuxos:2008.0:gcc]
packages=gcc-c++

[pclinuxos:2008.0:gs]
packages=ghostscript

[pclinuxos:2008.0:libcrypto]
packages=openssl

[pclinuxos:2008.0:libjpeg]
packages=libjpeg62-devel

[pclinuxos:2008.0:libnetsnmp-devel]
packages=libnet-snmp10-devel

[pclinuxos:2008.0:libpthread]
packages=glibc

[pclinuxos:2008.0:libtool]
packages=libtool

[pclinuxos:2008.0:libusb]
packages=libusb-devel

[pclinuxos:2008.0:make]
packages=make

[pclinuxos:2008.0:pil]
packages=python-imaging

[pclinuxos:2008.0:ppdev]
packages=
commands=su -c "modprobe ppdev",su -c cp -f /etc/modules /etc/modules.hplip,echo ppdev | su -c tee -a /etc/modules

[pclinuxos:2008.0:pyqt]
packages=pyqt

[pclinuxos:2008.0:python-devel]
packages=libpython2.4-devel

[pclinuxos:2008.0:pyqt4]
packages=PyQt4

[pclinuxos:2008.0:pyqt4-dbus]
packages=dbus-python

[pclinuxos:2008.0:python23]
packages=python

[pclinuxos:2008.0:python2X]
packages=python

[pclinuxos:2008.0:reportlab]
packages=python-reportlab

[pclinuxos:2008.0:sane]
packages=sane-frontends

[pclinuxos:2008.0:sane-devel]
packages=libsane1-devel

[pclinuxos:2008.0:scanimage]
packages=sane-frontends

[pclinuxos:2008.0:xsane]
packages=xsane

[pclinuxos:2008.0:cups-ddk]
# packages=cupsddk,cupsddk-drivers

[pclinuxos:2008.0:python-dbus]
packages=dbus-python,python-gobject

[pclinuxos:2008.0:dbus]
packages=libdbus-1_3-devel

[pclinuxos:2008.0:python-ctypes]
packages=python-ctypes

[pclinuxos:2008.0:cups-image]
packages=libcups2-devel

[pclinuxos:2008.0:network]
packages=wget

[pclinuxos:2008.0:avahi-utils]
packages=avahi

[pclinuxos:2008.0:automake]
packages=automake1.11

# ********************
[pclinuxos:2008]
same_as_version=2008.0

# ********************
[pclinuxos:2009.0]
code_name=
supported=0
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=
release_date=
notes=
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
libusb01=1

[pclinuxos:2009.0:cups]
packages=libcups2

[pclinuxos:2009.0:cups-devel]
packages=libcups2-devel

[pclinuxos:2009.0:gcc]
packages=gcc-c++

[pclinuxos:2009.0:gs]
packages=ghostscript

[pclinuxos:2009.0:libcrypto]
packages=openssl

[pclinuxos:2009.0:libjpeg]
packages=libjpeg62-devel

[pclinuxos:2009.0:libnetsnmp-devel]
packages=libnet-snmp10-devel

[pclinuxos:2009.0:libpthread]
packages=glibc

[pclinuxos:2009.0:libtool]
packages=libtool

[pclinuxos:2009.0:libusb]
packages=libusb-devel

[pclinuxos:2009.0:make]
packages=make

[pclinuxos:2009.0:pil]
packages=python-imaging

[pclinuxos:2009.0:ppdev]
packages=
commands=su -c "modprobe ppdev",su -c cp -f /etc/modules /etc/modules.hplip,echo ppdev | su -c tee -a /etc/modules

[pclinuxos:2009.0:pyqt]
packages=pyqt

[pclinuxos:2009.0:python-devel]
packages=libpython2.4-devel

[pclinuxos:2009.0:pyqt4]
packages=PyQt4

[pclinuxos:2009.0:pyqt4-dbus]
packages=dbus-python

[pclinuxos:2009.0:python23]
packages=python

[pclinuxos:2009.0:python2X]
packages=python

[pclinuxos:2009.0:reportlab]
packages=python-reportlab

[pclinuxos:2009.0:sane]
packages=sane-frontends

[pclinuxos:2009.0:sane-devel]
packages=libsane1-devel

[pclinuxos:2009.0:scanimage]
packages=sane-frontends

[pclinuxos:2009.0:xsane]
packages=xsane

[pclinuxos:2009.0:cups-ddk]
# packages=cupsddk,cupsddk-drivers

[pclinuxos:2009.0:python-dbus]
packages=dbus-python,python-gobject

[pclinuxos:2009.0:dbus]
packages=libdbus-1_3-devel

[pclinuxos:2009.0:python-ctypes]
packages=python-ctypes

[pclinuxos:2009.0:cups-image]
packages=libcups2-devel

[pclinuxos:2009.0:network]
packages=wget

[pclinuxos:2009.0:avahi-utils]
packages=avahi

[pclinuxos:2009.0:automake]
packages=automake1.11

# ********************
[pclinuxos:2009]
same_as_version=2009.0

# ********************
[pclinuxos:2009.1]
code_name=
supported=0
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=
release_date=
notes=
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
libusb01=1

[pclinuxos:2009.1:cups]
packages=libcups2

[pclinuxos:2009.1:cups-devel]
packages=libcups2-devel

[pclinuxos:2009.1:gcc]
packages=gcc-c++

[pclinuxos:2009.1:gs]
packages=ghostscript

[pclinuxos:2009.1:libcrypto]
packages=openssl

[pclinuxos:2009.1:libjpeg]
packages=libjpeg62-devel

[pclinuxos:2009.1:libnetsnmp-devel]
packages=libnet-snmp10-devel

[pclinuxos:2009.1:libpthread]
packages=glibc

[pclinuxos:2009.1:libtool]
packages=libtool

[pclinuxos:2009.1:libusb]
packages=libusb-devel

[pclinuxos:2009.1:make]
packages=make

[pclinuxos:2009.1:pil]
packages=python-imaging

[pclinuxos:2009.1:ppdev]
packages=
commands=su -c "modprobe ppdev",su -c cp -f /etc/modules /etc/modules.hplip,echo ppdev | su -c tee -a /etc/modules

[pclinuxos:2009.1:pyqt]
packages=pyqt

[pclinuxos:2009.1:python-devel]
packages=libpython2.4-devel

[pclinuxos:2009.1:pyqt4]
packages=PyQt4

[pclinuxos:2009.1:pyqt4-dbus]
packages=dbus-python

[pclinuxos:2009.1:python23]
packages=python

[pclinuxos:2009.1:python2X]
packages=python

[pclinuxos:2009.1:reportlab]
packages=python-reportlab

[pclinuxos:2009.1:sane]
packages=sane-frontends

[pclinuxos:2009.1:sane-devel]
packages=libsane1-devel

[pclinuxos:2009.1:scanimage]
packages=sane-frontends

[pclinuxos:2009.1:xsane]
packages=xsane

[pclinuxos:2009.1:cups-ddk]
# packages=cupsddk,cupsddk-drivers

[pclinuxos:2009.1:python-dbus]
packages=dbus-python,python-gobject

[pclinuxos:2009.1:dbus]
packages=libdbus-1_3-devel

[pclinuxos:2009.1:python-ctypes]
packages=python-ctypes

[pclinuxos:2009.1:cups-image]
packages=libcups2-devel

[pclinuxos:2009.1:network]
packages=wget

[pclinuxos:2009.1:avahi-utils]
packages=avahi

[pclinuxos:2009.1:automake]
packages=automake1.11

# ****************************************
[igos]
index=32
versions=1.0
display_name=IGOS
alt_names=IGOS
display=1
notes=SELinux must be disabled for HPLIP to function properly. Please disable SELinux before continuing.
package_mgrs=yum,rpm,up2date
package_mgr_cmd=su -c "yum -y -d 10 -e 1 install $packages_to_install"
pre_depend_cmd=su -c "yum clean all"
post_depend_cmd=
hplip_remove_cmd=su -c "yum -y -d 10 -e 1 remove hplip hpijs"
su_sudo=su
ppd_install=ppd
udev_mode_fix=1
ppd_dir=
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP

# ********************
[igos:1.0]
code_name=Nusantara
supported=0
scan_supported=1
fax_supported=0
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=
release_date=
notes=
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt3

[igos:1.0:cups]
packages=cups

[igos:1.0:cups-devel]
packages=cups-devel

[igos:1.0:gcc]
packages=gcc-c++

[igos:1.0:gs]
packages=ghostscript

[igos:1.0:libcrypto]
packages=net-snmp-devel

[igos:1.0:libjpeg]
packages=libjpeg-devel

[igos:1.0:libnetsnmp-devel]
packages=net-snmp-devel

[igos:1.0:libpthread]
packages=glibc-headers

[igos:1.0:libtool]
packages=libtool

[igos:1.0:libusb]
packages=libusb-devel

[igos:1.0:make]
packages=make

[igos:1.0:pil]
packages=python-imaging

[igos:1.0:ppdev]
packages=
commands=su -c "/sbin/modprobe ppdev"

[igos:1.0:pyqt]
packages=PyQt

[igos:1.0:python-devel]
packages=python-devel

[igos:1.0::pyqt4]
packages=

[igos:1.0:pyqt4-dbus]
packages=

[igos:1.0:python23]
packages=python

[igos:1.0:python2X]
packages=python

[igos:1.0:reportlab]
packages=python-reportlab

[igos:1.0:sane]
packages=sane-backends

[igos:1.0:sane-devel]
packages=sane-devel

[igos:1.0:scanimage]
packages=sane-frontends

[igos:1.0:xsane]
packages=xsane

[igos:1.0:cups-ddk]
# packages=cupsddk,cupsddk-drivers

[igos:1.0:python-dbus]
# packages=dbus-python,python-gobject

[igos:1.0:python-ctypes]
# packages=python-ctypes

[igos:1.0:cups-image]
packages=

[igos:1.0:network]
packages=wget

[igos:1.0:avahi-utils]
packages=avahi

[igos:1.0:automake]
packages=automake1.11

[igos:1.0:epm]
packages=epm

# ****************************************
[ubuntu]
index=12
versions=10.04,11.10,12.04,12.10,13.04,13.10,14.04,14.10,15.04,15.10,16.04,16.10,17.04,17.10,18.04,18.10,19.04,19.10
display_name=Ubuntu
alt_names=kubuntu,edubuntu,xubuntu
display=1
notes=
package_mgrs=dpkg,apt-get,synaptic,update-manager,adept,aptitude,adept-updater
package_mgr_cmd=sudo apt-get install --assume-yes $packages_to_install
pre_depend_cmd=sudo dpkg --configure -a,sudo apt-get install --yes --force-yes -f,sudo apt-get update
post_depend_cmd=
scanjet_depend_cmd=sudo apt-get install --assume-yes python-pip,sudo pip2 install --upgrade pip,sudo apt-get install --assume-yes libleptonica-dev,sudo apt-get install --assume-yes tesseract-ocr,sudo apt-get install --assume-yes libtesseract-dev,sudo -H pip2 install tesserocr,sudo apt-get install --assume-yes tesseract-ocr-all,sudo apt-get install --assume-yes libzbar-dev,sudo apt-get install --assume-yes python-zbar,sudo -H pip2 install opencv-python,sudo -H pip2 install PyPDF2,sudo -H pip2 install imutils,sudo -H pip2 install pypdfocr,sudo -H pip2 install scikit-image,sudo -H pip2 install scipy
#sudo apt-get install --assume-yes tesseract-ocr-all
scanjet_py3_depend_cmd=sudo apt-get install --assume-yes python3-pip,sudo pip3 install --upgrade pip,sudo apt-get install --assume-yes libleptonica-dev,sudo apt-get install --assume-yes tesseract-ocr,sudo apt-get install --assume-yes libtesseract-dev,sudo -H pip3 install tesserocr,sudo -H pip3 install opencv-python,sudo -H pip3 install PyPDF2,sudo -H pip3 install imutils,sudo -H pip3 install ocrmypdf,sudo -H pip3 install scikit-image,sudo -H pip3 install scipy,sudo apt-get install --assume-yes qpdf
hplip_remove_cmd=sudo apt-get remove --assume-yes hplip hpijs hplip-cups hplip-data libhpmud0 foomatic-db-hpijs
#sudo apt-get install --assume-yes tesseract-ocr-all,
su_sudo=sudo
ppd_install=ppd
udev_mode_fix=1
ppd_dir=
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP

# ********************
[ubuntu:10.04]
code_name=Lucid
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.10.2
release_date=2010
notes=Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
native_cups=1
acl_rules=1


[ubuntu:10.04:cups]
packages=libcups2

[ubuntu:10.04:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[ubuntu:10.04:gcc]
packages=build-essential

[ubuntu:10.04:gs]
packages=ghostscript

[ubuntu:10.04:libcrypto]
packages=openssl

[ubuntu:10.04:libjpeg]
packages=libjpeg62-dev

[ubuntu:10.04:libnetsnmp-devel]
packages=libsnmp-dev

[ubuntu:10.04:libpthread]
packages=build-essential

[ubuntu:10.04:libtool]
packages=libtool

[ubuntu:10.04:libusb]
packages=libusb-1.0-0-dev,libusb-0.1-4

[ubuntu:10.04:make]
packages=build-essential

[ubuntu:10.04:pil]
packages=python-imaging

[ubuntu:10.04:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[ubuntu:10.04:pyqt]
packages=python-qt4

[ubuntu:10.04:python-devel]
packages=python-dev

[ubuntu:10.04:pyqt4]
packages=python-qt4

[ubuntu:10.04:pyqt4-dbus]
packages=python-qt4-dbus

#[ubuntu:10.04:python23]
#packages=python

[ubuntu:10.04:python2X]
packages=python

[ubuntu:10.04:reportlab]
packages=python-reportlab

[ubuntu:10.04:sane]
packages=libsane

[ubuntu:10.04:sane-devel]
packages=libsane-dev

[ubuntu:10.04:scanimage]
packages=sane-utils

[ubuntu:10.04:xsane]
packages=xsane

[ubuntu:10.04:python-dbus]
packages=python-dbus,python-gobject

[ubuntu:10.04:dbus]
packages=libdbus-1-dev

[ubuntu:10.04:cups-image]
packages=libcupsimage2-dev

[ubuntu:10.04:cups-ddk]
packages=cups

[ubuntu:10.04:policykit]
packages=policykit-1,policykit-1-gnome

[ubuntu:10.04:python-notify]
packages=python-notify

[ubuntu:10.04:network]
packages=wget

[ubuntu:10.04:avahi-utils]
packages=avahi-utils

[ubuntu:10.04:automake]
packages=automake1.11

[ubuntu:10.04:epm]
packages=epm

# ********************
[ubuntu:11.10]
code_name=Oneiric
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.11.5
release_date=13/10/2011
notes=Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
native_cups=1
acl_rules=1

libdir_path=/usr/lib

[ubuntu:11.10:cups]
packages=libcups2

[ubuntu:11.10:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[ubuntu:11.10:gcc]
packages=build-essential

[ubuntu:11.10:gs]
packages=ghostscript

[ubuntu:11.10:libcrypto]
packages=openssl

[ubuntu:11.10:libjpeg]
packages=libjpeg62-dev

[ubuntu:11.10:libnetsnmp-devel]
packages=libsnmp-dev

[ubuntu:11.10:libpthread]
packages=build-essential

[ubuntu:11.10:libtool]
packages=libtool

[ubuntu:11.10:libusb]
packages=libusb-1.0.0-dev,libusb-0.1-4

[ubuntu:11.10:make]
packages=build-essential

[ubuntu:11.10:pil]
packages=python-imaging

[ubuntu:11.10:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[ubuntu:11.10:pyqt]
packages=gtk2-engines-pixbuf,python-qt4

[ubuntu:11.10:python-devel]
packages=python-dev

[ubuntu:11.10:pyqt4]
packages=gtk2-engines-pixbuf,python-qt4

[ubuntu:11.10:pyqt4-dbus]
packages=python-qt4-dbus

#[ubuntu:11.10:python23]
#packages=python

[ubuntu:11.10:python2X]
packages=python

[ubuntu:11.10:reportlab]
packages=python-reportlab

[ubuntu:11.10:sane]
packages=libsane

[ubuntu:11.10:sane-devel]
packages=libsane-dev

[ubuntu:11.10:scanimage]
packages=sane-utils

[ubuntu:11.10:xsane]
packages=gtk2-engines-pixbuf,xsane

[ubuntu:11.10:python-dbus]
packages=python-dbus,python-gobject

[ubuntu:11.10:dbus]
packages=libdbus-1-dev

[ubuntu:11.10:cups-image]
packages=libcupsimage2-dev

[ubuntu:11.10:cups-ddk]
packages=cups

[ubuntu:11.10:policykit]
packages=policykit-1,policykit-1-gnome

[ubuntu:11.10:python-notify]
packages=python-notify

[ubuntu:11.10:network]
packages=wget

[ubuntu:11.10:avahi-utils]
packages=avahi-utils

[ubuntu:11.10:automake]
packages=automake1.11

[ubuntu:11.10:epm]
packages=epm

# ********************
[ubuntu:12.04]
code_name=Precise
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.12.2
release_date=28/04/2012
notes=Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
native_cups=1
acl_rules=1

libdir_path=/usr/lib

[ubuntu:12.04:cups]
packages=libcups2

[ubuntu:12.04:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[ubuntu:12.04:gcc]
packages=build-essential

[ubuntu:12.04:gs]
packages=ghostscript

[ubuntu:12.04:libcrypto]
packages=openssl

[ubuntu:12.04:libjpeg]
packages=libjpeg-dev

[ubuntu:12.04:libnetsnmp-devel]
packages=libsnmp-dev

[ubuntu:12.04:libpthread]
packages=build-essential

[ubuntu:12.04:libtool]
packages=libtool

[ubuntu:12.04:libusb]
packages=libusb-1.0.0-dev,libusb-0.1-4

[ubuntu:12.04:make]
packages=build-essential

[ubuntu:12.04:pil]
packages=python-imaging

[ubuntu:12.04:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[ubuntu:12.04:pyqt]
packages=gtk2-engines-pixbuf,python-qt4

[ubuntu:12.04:python-devel]
packages=python-dev

[ubuntu:12.04:pyqt4]
packages=gtk2-engines-pixbuf,python-qt4

[ubuntu:12.04:pyqt4-dbus]
packages=python-qt4-dbus

#[ubuntu:12.04:python23]
#packages=python

[ubuntu:12.04:python2X]
packages=python

[ubuntu:12.04:python3X]
packages=python3,python3.2

[ubuntu:12.04:reportlab]
packages=python-reportlab

[ubuntu:12.04:sane]
packages=libsane

[ubuntu:12.04:sane-devel]
packages=libsane-dev

[ubuntu:12.04:scanimage]
packages=sane-utils

[ubuntu:12.04:xsane]
packages=gtk2-engines-pixbuf,xsane

[ubuntu:12.04:python-dbus]
packages=python-dbus,python-gobject

[ubuntu:12.04:dbus]
packages=libdbus-1-dev

[ubuntu:12.04:cups-image]
packages=libcupsimage2-dev

[ubuntu:12.04:cups-ddk]
packages=cups

[ubuntu:12.04:policykit]
packages=policykit-1,policykit-1-gnome

[ubuntu:12.04:python-notify]
packages=python-notify2

[ubuntu:12.04:network]
packages=wget

[ubuntu:12.04:avahi-utils]
packages=avahi-utils

[ubuntu:12.04:python3-notify2]
packages=python3-notify2

[ubuntu:12.04:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt

[ubuntu:12.04:python3-pyqt4]
packages=python3-pyqt4,gtk2-engines-pixbuf

[ubuntu:12.04:python3-dbus]
packages=python3-dbus,python3-gi

[ubuntu:12.04:python3-xml]
packages=python3-lxml

[ubuntu:12.04:python3-devel]
packages=python3-dev

[ubuntu:12.04:python3-pil]
packages=PKG_FROM_PIP:pillow

[ubuntu:12.04:automake]
packages=automake1.11

[ubuntu:12.04:epm]
packages=epm

# ********************
[ubuntu:12.10]
code_name=Quantal
packaged_version=3.12.11
release_date=18/10/2012
same_as_version=12.04

# ********************
[ubuntu:13.04]
code_name=Raring
supported=1
scan_supported=1
fax_supported=1
pcard_supported=0
network_supported=1
parallel_supported=0
usb_supported=1
packaged_version=3.13.4
release_date=25/04/2013
notes=Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
native_cups=1
acl_rules=1

libdir_path=/usr/lib

[ubuntu:13.04:cups]
packages=libcups2

[ubuntu:13.04:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[ubuntu:13.04:gcc]
packages=build-essential

[ubuntu:13.04:gs]
packages=ghostscript

[ubuntu:13.04:libcrypto]
packages=openssl

[ubuntu:13.04:libjpeg]
packages=libjpeg-dev

[ubuntu:13.04:libnetsnmp-devel]
packages=libsnmp-dev

[ubuntu:13.04:libpthread]
packages=build-essential

[ubuntu:13.04:libtool]
packages=libtool

[ubuntu:13.04:libusb]
packages=libusb-1.0.0-dev,libusb-0.1-4

[ubuntu:13.04:make]
packages=build-essential

[ubuntu:13.04:pil]
packages=python-imaging

[ubuntu:13.04:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[ubuntu:13.04:pyqt]
packages=gtk2-engines-pixbuf,python-qt4

[ubuntu:13.04:python-devel]
packages=python-dev

[ubuntu:13.04:pyqt4]
packages=gtk2-engines-pixbuf,python-qt4

[ubuntu:13.04:pyqt4-dbus]
packages=python-qt4-dbus

#[ubuntu:13.04:python23]
#packages=python

[ubuntu:13.04:python2X]
packages=python

[ubuntu:13.04:python3X]
packages=python3,python3.2

[ubuntu:13.04:reportlab]
packages=python-reportlab

[ubuntu:13.04:sane]
packages=libsane

[ubuntu:13.04:sane-devel]
packages=libsane-dev

[ubuntu:13.04:scanimage]
packages=sane-utils

[ubuntu:13.04:xsane]
packages=gtk2-engines-pixbuf,xsane

[ubuntu:13.04:python-dbus]
packages=python-dbus,python-gobject

[ubuntu:13.04:dbus]
packages=libdbus-1-dev

[ubuntu:13.04:cups-image]
packages=libcupsimage2-dev

[ubuntu:13.04:cups-ddk]
packages=cups

[ubuntu:13.04:policykit]
packages=policykit-1,policykit-1-gnome

[ubuntu:13.04:python-notify]
packages=python-notify2

[ubuntu:13.04:network]
packages=wget

[ubuntu:13.04:avahi-utils]
packages=avahi-utils

[ubuntu:13.04:python3-notify2]
packages=python3-notify2

[ubuntu:13.04:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt

[ubuntu:13.04:python3-pyqt4]
packages=python3-pyqt4,gtk2-engines-pixbuf

[ubuntu:13.04:python3-dbus]
packages=python3-dbus,python3-gi

[ubuntu:13.04:python3-xml]
packages=python3-lxml

[ubuntu:13.04:python3-devel]
packages=python3-dev

[ubuntu:13.04:python3-pil]
packages=python3-imaging

[ubuntu:13.04:automake]
packages=automake1.11

[ubuntu:13.04:epm]
packages=epm

# ********************
[ubuntu:13.10]
code_name=Saucy
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.13.7
release_date=17/10/2013
notes=Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
native_cups=1
acl_rules=1

libdir_path=/usr/lib
[ubuntu:13.10:cups]
packages=libcups2

[ubuntu:13.10:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[ubuntu:13.10:gcc]
packages=build-essential

[ubuntu:13.10:gs]
packages=ghostscript

[ubuntu:13.10:libcrypto]
packages=openssl

[ubuntu:13.10:libjpeg]
packages=libjpeg-dev

[ubuntu:13.10:libnetsnmp-devel]
packages=libsnmp-dev,snmp-mibs-downloader

[ubuntu:13.10:libpthread]
packages=build-essential

[ubuntu:13.10:libtool]
packages=libtool

[ubuntu:13.10:libusb]
packages=libusb-1.0.0-dev,libusb-0.1-4

[ubuntu:13.10:make]
packages=build-essential

[ubuntu:13.10:pil]
packages=python-imaging

[ubuntu:13.10:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[ubuntu:13.10:pyqt]
packages=gtk2-engines-pixbuf,python-qt4

[ubuntu:13.10:python-devel]
packages=python-dev

[ubuntu:13.10:pyqt4]
packages=gtk2-engines-pixbuf,python-qt4

[ubuntu:13.10:pyqt4-dbus]
packages=python-qt4-dbus

#[ubuntu:13.10:python23]
#packages=python

[ubuntu:13.10:python2X]
packages=python

[ubuntu:13.10:reportlab]
packages=python-reportlab

[ubuntu:13.10:sane]
packages=libsane

[ubuntu:13.10:sane-devel]
packages=libsane-dev

[ubuntu:13.10:scanimage]
packages=sane-utils

[ubuntu:13.10:xsane]
packages=gtk2-engines-pixbuf,xsane

[ubuntu:13.10:python-dbus]
packages=python-dbus,python-gobject

[ubuntu:13.10:dbus]
packages=libdbus-1-dev

[ubuntu:13.10:cups-image]
packages=libcupsimage2-dev

[ubuntu:13.10:cups-ddk]
packages=cups

[ubuntu:13.10:policykit]
packages=policykit-1,policykit-1-gnome

[ubuntu:13.10:python-notify]
packages=python-notify

[ubuntu:13.10:network]
packages=wget

[ubuntu:13.10:avahi-utils]
packages=avahi-utils

[ubuntu:13.10:python3-notify2]
packages=python3-notify2

[ubuntu:13.10:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt

[ubuntu:13.10:python3-pyqt4]
packages=python3-pyqt4,gtk2-engines-pixbuf

[ubuntu:13.10:python3-dbus]
packages=python3-dbus,python3-gi

[ubuntu:13.10:python3-xml]
packages=python3-lxml

[ubuntu:13.10:python3-devel]
packages=python3-dev

[ubuntu:13.10:python3-pil]
packages=python3-imaging

[ubuntu:13.10:python3-reportlab]
packages=python3-reportlab

[ubuntu:13.10:automake]
packages=automake1.11

[ubuntu:13.10:epm]
packages=epm

# ********************
[ubuntu:14.04]
code_name=Trusty
packaged_version=3.14.1
release_date=17/04/2014
same_as_version=13.10

# ********************
[ubuntu:14.10]
code_name=Utopic
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.14.6
release_date=23/10/2014
notes=Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
native_cups=1
acl_rules=1

libdir_path=/usr/lib
[ubuntu:14.10:cups]
packages=libcups2

[ubuntu:14.10:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[ubuntu:14.10:gcc]
packages=build-essential

[ubuntu:14.10:gs]
packages=ghostscript

[ubuntu:14.10:libcrypto]
packages=openssl

[ubuntu:14.10:libjpeg]
packages=libjpeg-dev

[ubuntu:14.10:libnetsnmp-devel]
packages=libsnmp-dev,snmp-mibs-downloader

[ubuntu:14.10:libpthread]
packages=build-essential

[ubuntu:14.10:libtool]
packages=libtool

[ubuntu:14.10:libusb]
packages=libusb-1.0.0-dev,libusb-0.1-4

[ubuntu:14.10:make]
packages=build-essential

[ubuntu:14.10:pil]
packages=python-imaging

[ubuntu:14.10:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[ubuntu:14.10:pyqt]
packages=gtk2-engines-pixbuf,python-qt4

[ubuntu:14.10:python-devel]
packages=python-dev

[ubuntu:14.10:pyqt4]
packages=gtk2-engines-pixbuf,python-qt4

[ubuntu:14.10:pyqt4-dbus]
packages=python-qt4-dbus

#[ubuntu:14.10:python23]
#packages=python

[ubuntu:14.10:python2X]
packages=python

[ubuntu:14.10:reportlab]
packages=python-reportlab

[ubuntu:14.10:sane]
packages=libsane

[ubuntu:14.10:sane-devel]
packages=libsane-dev

[ubuntu:14.10:scanimage]
packages=sane-utils

[ubuntu:14.10:xsane]
packages=gtk2-engines-pixbuf,xsane

[ubuntu:14.10:python-dbus]
packages=python-dbus,python-gobject

[ubuntu:14.10:dbus]
packages=libdbus-1-dev

[ubuntu:14.10:cups-image]
packages=libcupsimage2-dev

[ubuntu:14.10:cups-ddk]
packages=cups

[ubuntu:14.10:policykit]
packages=policykit-1,policykit-1-gnome

[ubuntu:14.10:python-notify]
packages=python-notify

[ubuntu:14.10:network]
packages=wget

[ubuntu:14.10:avahi-utils]
packages=avahi-utils

[ubuntu:14.10:python3-notify2]
packages=python3-notify2

[ubuntu:14.10:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt

[ubuntu:14.10:python3-pyqt4]
packages=python3-pyqt4,gtk2-engines-pixbuf

[ubuntu:14.10:python3-dbus]
packages=python3-dbus,python3-gi

[ubuntu:14.10:python3-xml]
packages=python3-lxml

[ubuntu:14.10:python3-devel]
packages=python3-dev

[ubuntu:14.10:python3-pil]
packages=python3-pil

[ubuntu:14.10:python3-reportlab]
packages=python3-reportlab

[ubuntu:14.10:automake]
packages=automake1.11

[ubuntu:14.10:epm]
packages=epm

# ********************
[ubuntu:15.04]
code_name=Vivid
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.15.2
release_date=17/04/2015
notes=Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
native_cups=1
acl_rules=1

libdir_path=/usr/lib
[ubuntu:15.04:cups]
packages=libcups2

[ubuntu:15.04:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[ubuntu:15.04:gcc]
packages=build-essential

[ubuntu:15.04:gs]
packages=ghostscript

[ubuntu:15.04:libcrypto]
packages=openssl

[ubuntu:15.04:libjpeg]
packages=libjpeg-dev

[ubuntu:15.04:libnetsnmp-devel]
packages=libsnmp-dev,snmp-mibs-downloader

[ubuntu:15.04:libpthread]
packages=build-essential

[ubuntu:15.04:libtool]
packages=libtool,libtool-bin

[ubuntu:15.04:libusb]
packages=libusb-1.0.0-dev,libusb-0.1-4

[ubuntu:15.04:make]
packages=build-essential

[ubuntu:15.04:pil]
packages=python-imaging

[ubuntu:15.04:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[ubuntu:15.04:pyqt]
packages=gtk2-engines-pixbuf,python-qt4

[ubuntu:15.04:python-devel]
packages=python-dev

[ubuntu:15.04:pyqt4]
packages=gtk2-engines-pixbuf,python-qt4

[ubuntu:15.04:pyqt4-dbus]
packages=python-qt4-dbus

#[ubuntu:15.04:python23]
#packages=python

[ubuntu:15.04:python2X]
packages=python

[ubuntu:15.04:reportlab]
packages=python-reportlab

[ubuntu:15.04:sane]
packages=libsane

[ubuntu:15.04:sane-devel]
packages=libsane-dev

[ubuntu:15.04:scanimage]
packages=sane-utils

[ubuntu:15.04:xsane]
packages=gtk2-engines-pixbuf,xsane

[ubuntu:15.04:python-dbus]
packages=python-dbus,python-gobject

[ubuntu:15.04:dbus]
packages=libdbus-1-dev

[ubuntu:15.04:cups-image]
packages=libcupsimage2-dev

[ubuntu:15.04:cups-ddk]
packages=cups

[ubuntu:15.04:policykit]
packages=policykit-1,policykit-1-gnome

[ubuntu:15.04:python-notify]
packages=python-notify

[ubuntu:15.04:network]
packages=wget

[ubuntu:15.04:avahi-utils]
packages=avahi-utils

[ubuntu:15.04:python3-notify2]
packages=python3-notify2

[ubuntu:15.04:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt

[ubuntu:15.04:python3-pyqt4]
packages=python3-pyqt4,gtk2-engines-pixbuf

[ubuntu:15.04:python3-dbus]
packages=python3-dbus,python3-gi

[ubuntu:15.04:python3-xml]
packages=python3-lxml

[ubuntu:15.04:python3-devel]
packages=python3-dev

[ubuntu:15.04:python3-pil]
packages=python3-pil

[ubuntu:15.04:python3-reportlab]
packages=python3-reportlab

[ubuntu:15.04:automake]
packages=automake1.11

[ubuntu:15.04:epm]
packages=epm

# ********************

[ubuntu:15.10]
code_name=Willy
packaged_version=3.15.7
release_date=22/10/2015
same_as_version=15.04

[ubuntu:15.10:python3-devel]
packages=python3-dev,python3.4-dev,python3.5-dev

# ********************
[ubuntu:16.04]
code_name=Xenial
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.15.2
release_date=17/04/2016
notes=Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
native_cups=1
acl_rules=1
scanjet_depend_cmd=sudo apt-get install --assume-yes python-pip,sudo pip install --upgrade pip,sudo apt-get install --assume-yes libleptonica-dev,sudo apt-get install --assume-yes tesseract-ocr,sudo apt-get install --assume-yes libtesseract-dev,sudo -H pip install tesserocr,sudo apt-get install --assume-yes libzbar-dev,sudo apt-get install --assume-yes python-zbar,sudo apt-get install --assume-yes python-opencv,sudo apt-get install --assume-yes python-pypdf2,sudo -H pip install imutils,sudo -H pip install pypdfocr,sudo -H pip install scikit-image,sudo -H pip install scipy
#sudo apt-get install --assume-yes tesseract-ocr-all,
#scanjet_py3_depend_cmd=sudo apt-get install --assume-yes python3-pip,sudo pip3 install --upgrade pip,sudo apt-get install --assume-yes libleptonica-dev,sudo apt-get install --assume-yes tesseract-ocr,sudo apt-get install --assume-yes libtesseract-dev,sudo -H pip3 install tesserocr,sudo apt-get install --assume-yes tesseract-ocr-all,sudo -H pip3 install opencv-python,sudo -H pip3 install PyPDF2,sudo -H pip3 install imutils,sudo -H pip3 install ocrmypdf,sudo -H pip3 install scikit-image,sudo -H pip3 install scipy

libdir_path=/usr/lib
[ubuntu:16.04:cups]
packages=libcups2

[ubuntu:16.04:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[ubuntu:16.04:gcc]
packages=build-essential

[ubuntu:16.04:gs]
packages=ghostscript

[ubuntu:16.04:libcrypto]
packages=openssl

[ubuntu:16.04:libjpeg]
packages=libjpeg-dev

[ubuntu:16.04:libnetsnmp-devel]
packages=libsnmp-dev,snmp-mibs-downloader

[ubuntu:16.04:libpthread]
packages=build-essential

[ubuntu:16.04:libtool]
packages=libtool,libtool-bin

[ubuntu:16.04:libusb]
packages=libusb-1.0.0-dev,libusb-0.1-4

[ubuntu:16.04:make]
packages=build-essential

[ubuntu:16.04:pil]
packages=python-imaging

[ubuntu:16.04:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[ubuntu:16.04:pyqt]
packages=gtk2-engines-pixbuf,python-qt4

[ubuntu:16.04:python-devel]
packages=python-dev

[ubuntu:16.04:pyqt4]
packages=gtk2-engines-pixbuf,python-qt4

[ubuntu:16.04:pyqt4-dbus]
packages=python-qt4-dbus

[ubuntu:16.04:pyqt5]
packages=gtk2-engines-pixbuf,python-pyqt5

[ubuntu:16.04:pyqt5-dbus]
packages=python-dbus.mainloop.pyqt5

#[ubuntu:16.04:python23]
#packages=python

[ubuntu:16.04:python2X]
packages=python

[ubuntu:16.04:reportlab]
packages=python-reportlab

[ubuntu:16.04:sane]
packages=libsane

[ubuntu:16.04:sane-devel]
packages=libsane-dev

[ubuntu:16.04:scanimage]
packages=sane-utils

[ubuntu:16.04:xsane]
packages=gtk2-engines-pixbuf,xsane

[ubuntu:16.04:python-dbus]
packages=python-dbus,python-gobject

[ubuntu:16.04:dbus]
packages=libdbus-1-dev

[ubuntu:16.04:cups-image]
packages=libcupsimage2-dev

[ubuntu:16.04:cups-ddk]
packages=cups

[ubuntu:16.04:policykit]
packages=policykit-1,policykit-1-gnome

[ubuntu:16.04:python-notify]
packages=python-notify

[ubuntu:16.04:network]
packages=wget

[ubuntu:16.04:avahi-utils]
packages=avahi-utils

[ubuntu:16.04:python3-notify2]
packages=python3-notify2

[ubuntu:16.04:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt

[ubuntu:16.04:python3-pyqt4]
packages=python3-pyqt4,gtk2-engines-pixbuf

[ubuntu:16.04:python3-pyqt5-dbus]
packages=python3-dbus.mainloop.pyqt5

[ubuntu:16.04:python3-pyqt5]
packages=python3-pyqt5,gtk2-engines-pixbuf

[ubuntu:16.04:python3-dbus]
packages=python3-dbus,python3-gi

[ubuntu:16.04:python3-xml]
packages=python3-lxml

[ubuntu:16.04:python3-devel]
packages=python3-dev

[ubuntu:16.04:python3-pil]
packages=python3-pil

[ubuntu:16.04:python3-reportlab]
packages=python3-reportlab

[ubuntu:16.04:automake]
packages=automake1.11

[ubuntu:16.04:epm]
packages=epm



# ********************
[ubuntu:16.10]
code_name=Yakkety
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.16.10
release_date=13/10/2016
notes=Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
native_cups=1
acl_rules=1

libdir_path=/usr/lib
[ubuntu:16.10:cups]
packages=libcups2

[ubuntu:16.10:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[ubuntu:16.10:gcc]
packages=build-essential

[ubuntu:16.10:gs]
packages=ghostscript

[ubuntu:16.10:libcrypto]
packages=openssl

[ubuntu:16.10:libjpeg]
packages=libjpeg-dev

[ubuntu:16.10:libnetsnmp-devel]
packages=libsnmp-dev,snmp-mibs-downloader

[ubuntu:16.10:libpthread]
packages=build-essential

[ubuntu:16.10:libtool]
packages=libtool,libtool-bin

[ubuntu:16.10:libusb]
packages=libusb-1.0.0-dev,libusb-0.1-4

[ubuntu:16.10:make]
packages=build-essential

[ubuntu:16.10:pil]
packages=python-imaging

[ubuntu:16.10:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[ubuntu:16.10:pyqt]
packages=gtk2-engines-pixbuf,python-qt4

[ubuntu:16.10:python-devel]
packages=python-dev

[ubuntu:16.10:pyqt4]
packages=gtk2-engines-pixbuf,python-qt4

[ubuntu:16.10:pyqt4-dbus]
packages=python-qt4-dbus

[ubuntu:16.10:pyqt5]
packages=gtk2-engines-pixbuf,python-pyqt5

[ubuntu:16.10:pyqt5-dbus]
packages=python-dbus.mainloop.pyqt5

#[ubuntu:16.10:python23]
#packages=python

[ubuntu:16.10:python2X]
packages=python

[ubuntu:16.10:reportlab]
packages=python-reportlab

[ubuntu:16.10:sane]
packages=libsane

[ubuntu:16.10:sane-devel]
packages=libsane-dev

[ubuntu:16.10:scanimage]
packages=sane-utils

[ubuntu:16.10:xsane]
packages=gtk2-engines-pixbuf,xsane

[ubuntu:16.10:python-dbus]
packages=python-dbus,python-gobject

[ubuntu:16.10:dbus]
packages=libdbus-1-dev

[ubuntu:16.10:cups-image]
packages=libcupsimage2-dev

[ubuntu:16.10:cups-ddk]
packages=cups

[ubuntu:16.10:policykit]
packages=policykit-1,policykit-1-gnome

[ubuntu:16.10:python-notify]
packages=python-notify

[ubuntu:16.10:network]
packages=wget

[ubuntu:16.10:avahi-utils]
packages=avahi-utils

[ubuntu:16.10:python3-notify2]
packages=python3-notify2

[ubuntu:16.10:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt

[ubuntu:16.10:python3-pyqt4]
packages=python3-pyqt4,gtk2-engines-pixbuf

[ubuntu:16.10:python3-pyqt5-dbus]
packages=python3-dbus.mainloop.pyqt5

[ubuntu:16.10:python3-pyqt5]
packages=python3-pyqt5,gtk2-engines-pixbuf

[ubuntu:16.10:python3-dbus]
packages=python3-dbus,python3-gi

[ubuntu:16.10:python3-xml]
packages=python3-lxml

[ubuntu:16.10:python3-devel]
packages=python3-dev

[ubuntu:16.10:python3-pil]
packages=python3-pil

[ubuntu:16.10:python3-reportlab]
packages=python3-reportlab

[ubuntu:16.10:automake]
packages=automake1.11

[ubuntu:16.10:epm]
packages=epm


# ****************************************

[ubuntu:17.04]
code_name=Zesty
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.17.5
release_date=31/05/2017
notes=Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
native_cups=1
acl_rules=1

libdir_path=/usr/lib
[ubuntu:17.04:cups]
packages=libcups2

[ubuntu:17.04:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[ubuntu:17.04:gcc]
packages=build-essential

[ubuntu:17.04:gs]
packages=ghostscript

[ubuntu:17.04:libcrypto]
packages=openssl

[ubuntu:17.04:libjpeg]
packages=libjpeg-dev

[ubuntu:17.04:libnetsnmp-devel]
packages=libsnmp-dev,snmp-mibs-downloader

[ubuntu:17.04:libpthread]
packages=build-essential

[ubuntu:17.04:libtool]
packages=libtool,libtool-bin

[ubuntu:17.04:libusb]
packages=libusb-1.0.0-dev,libusb-0.1-4

[ubuntu:17.04:make]
packages=build-essential

[ubuntu:17.04:pil]
packages=python-imaging

[ubuntu:17.04:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[ubuntu:17.04:pyqt]
packages=gtk2-engines-pixbuf,python-qt4

[ubuntu:17.04:python-devel]
packages=python-dev

[ubuntu:17.04:pyqt4]
packages=gtk2-engines-pixbuf,python-qt4

[ubuntu:17.04:pyqt4-dbus]
packages=python-qt4-dbus

[ubuntu:17.04:pyqt5]
packages=gtk2-engines-pixbuf,python-pyqt5

[ubuntu:17.04:pyqt5-dbus]
packages=python-dbus.mainloop.pyqt5

#[ubuntu:17.04:python23]
#packages=python

[ubuntu:17.04:python2X]
packages=python

[ubuntu:17.04:reportlab]
packages=python-reportlab

[ubuntu:17.04:sane]
packages=libsane

[ubuntu:17.04:sane-devel]
packages=libsane-dev

[ubuntu:17.04:scanimage]
packages=sane-utils

[ubuntu:17.04:xsane]
packages=gtk2-engines-pixbuf,xsane

[ubuntu:17.04:python-dbus]
packages=python-dbus,python-gobject

[ubuntu:17.04:dbus]
packages=libdbus-1-dev

[ubuntu:17.04:cups-image]
packages=libcupsimage2-dev

[ubuntu:17.04:cups-ddk]
packages=cups

[ubuntu:17.04:policykit]
packages=policykit-1,policykit-1-gnome

[ubuntu:17.04:python-notify]
packages=python-notify

[ubuntu:17.04:network]
packages=wget

[ubuntu:17.04:avahi-utils]
packages=avahi-utils

[ubuntu:17.04:python3-notify2]
packages=python3-notify2

[ubuntu:17.04:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt

[ubuntu:17.04:python3-pyqt4]
packages=python3-pyqt4,gtk2-engines-pixbuf

[ubuntu:17.04:python3-pyqt5-dbus]
packages=python3-dbus.mainloop.pyqt5

[ubuntu:17.04:python3-pyqt5]
packages=python3-pyqt5,gtk2-engines-pixbuf

[ubuntu:17.04:python3-dbus]
packages=python3-dbus,python3-gi

[ubuntu:17.04:python3-xml]
packages=python3-lxml

[ubuntu:17.04:python3-devel]
packages=python3-dev

[ubuntu:17.04:python3-pil]
packages=python3-pil

[ubuntu:17.04:python3-reportlab]
packages=python3-reportlab

[ubuntu:17.04:automake]
packages=automake1.11

[ubuntu:17.04:epm]
packages=epm

# ****************************************

[ubuntu:17.10]
code_name=Artful Aardvark
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.17.11
release_date=19/10/2017
notes=Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
native_cups=1
acl_rules=1
#scanjet_depend_cmd=sudo apt-get install --assume-yes python2-pip,sudo pip2 install --upgrade pip,sudo apt-get install --assume-yes libleptonica-dev,sudo apt-get install --assume-yes tesseract-ocr,sudo apt-get install --assume-yes libtesseract-dev,sudo -H pip2 install tesserocr,sudo apt-get install --assume-yes tesseract-ocr-all,sudo apt-get install --assume-yes libzbar-dev,sudo apt-get install --assume-yes python-zbar,sudo -H pip2 install opencv-python,sudo -H pip2 install PyPDF2,sudo -H pip2 install imutils,sudo -H pip2 install pypdfocr,sudo -H pip2 install scikit-image,sudo -H pip2 install scipy
#scanjet_py3_depend_cmd=sudo apt-get install --assume-yes python3-pip,sudo pip3 install --upgrade pip,sudo apt-get install --assume-yes libleptonica-dev,sudo apt-get install --assume-yes tesseract-ocr,sudo apt-get install --assume-yes libtesseract-dev,sudo -H pip3 install tesserocr,sudo apt-get install --assume-yes tesseract-ocr-all,sudo -H pip3 install opencv-python,sudo -H pip3 install PyPDF2,sudo -H pip3 install imutils,sudo -H pip3 install ocrmypdf,sudo -H pip3 install scikit-image,sudo -H pip3 install scipy

libdir_path=/usr/lib
[ubuntu:17.10:cups]
packages=libcups2

[ubuntu:17.10:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[ubuntu:17.10:gcc]
packages=build-essential

[ubuntu:17.10:gs]
packages=ghostscript

[ubuntu:17.10:libcrypto]
packages=openssl,libssl-dev

[ubuntu:17.10:libjpeg]
packages=libjpeg-dev

[ubuntu:17.10:libnetsnmp-devel]
packages=libsnmp-dev,snmp-mibs-downloader

[ubuntu:17.10:libpthread]
packages=build-essential

[ubuntu:17.10:libtool]
packages=libtool,libtool-bin

[ubuntu:17.10:libusb]
packages=libusb-1.0.0-dev,libusb-0.1-4

[ubuntu:17.10:make]
packages=build-essential

[ubuntu:17.10:pil]
packages=python-imaging

[ubuntu:17.10:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[ubuntu:17.10:pyqt]
packages=gtk2-engines-pixbuf,python-qt4

[ubuntu:17.10:python-devel]
packages=python-dev

[ubuntu:17.10:pyqt4]
packages=gtk2-engines-pixbuf,python-qt4

[ubuntu:17.10:pyqt4-dbus]
packages=python-qt4-dbus

[ubuntu:17.10:pyqt5]
packages=gtk2-engines-pixbuf,python-pyqt5

[ubuntu:17.10:pyqt5-dbus]
packages=python-dbus.mainloop.pyqt5

#[ubuntu:17.10:python23]
#packages=python

[ubuntu:17.10:python2X]
packages=python

[ubuntu:17.10:reportlab]
packages=python-reportlab

[ubuntu:17.10:sane]
packages=libsane

[ubuntu:17.10:sane-devel]
packages=libsane-dev

[ubuntu:17.10:scanimage]
packages=sane-utils

[ubuntu:17.10:xsane]
packages=gtk2-engines-pixbuf,xsane

[ubuntu:17.10:python-dbus]
packages=python-dbus,python-gobject

[ubuntu:17.10:dbus]
packages=libdbus-1-dev

[ubuntu:17.10:cups-image]
packages=libcupsimage2-dev

[ubuntu:17.10:cups-ddk]
packages=cups

[ubuntu:17.10:policykit]
packages=policykit-1,policykit-1-gnome

[ubuntu:17.10:python-notify]
packages=python-notify

[ubuntu:17.10:network]
packages=wget

[ubuntu:17.10:avahi-utils]
packages=avahi-utils

[ubuntu:17.10:python3-notify2]
packages=python3-notify2

[ubuntu:17.10:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt

[ubuntu:17.10:python3-pyqt4]
packages=python3-pyqt4,gtk2-engines-pixbuf

[ubuntu:17.10:python3-pyqt5-dbus]
packages=python3-dbus.mainloop.pyqt5

[ubuntu:17.10:python3-pyqt5]
packages=python3-pyqt5,gtk2-engines-pixbuf

[ubuntu:17.10:python3-dbus]
packages=python3-dbus,python3-gi

[ubuntu:17.10:python3-xml]
packages=python3-lxml

[ubuntu:17.10:python3-devel]
packages=python3-dev

[ubuntu:17.10:python3-pil]
packages=python3-pil

[ubuntu:17.10:python3-reportlab]
packages=python3-reportlab

[ubuntu:17.10:automake]
packages=automake1.11

[ubuntu:17.10:epm]
packages=epm

# ****************************************

[ubuntu:18.04]
code_name=Bionic Beaver
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.18.4
release_date=5/04/2018
notes=Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
native_cups=1
acl_rules=1
#scanjet_depend_cmd=sudo apt-get install --assume-yes python-pip,sudo pip2 install --upgrade pip,sudo apt-get install --assume-yes libleptonica-dev,sudo apt-get install --assume-yes tesseract-ocr,sudo apt-get install --assume-yes libtesseract-dev,sudo -H pip2 install tesserocr,sudo apt-get install --assume-yes tesseract-ocr-all,sudo apt-get install --assume-yes libzbar-dev,sudo apt-get install --assume-yes python-zbar,sudo -H pip2 install opencv-python,sudo -H pip2 install PyPDF2,sudo -H pip2 install imutils,sudo -H pip2 install pypdfocr,sudo -H pip2 install scikit-image,sudo -H pip2 install scipy
#scanjet_py3_depend_cmd=sudo apt-get install --assume-yes python3-pip,sudo pip3 install --upgrade pip,sudo apt-get install --assume-yes libleptonica-dev,sudo apt-get install --assume-yes tesseract-ocr,sudo apt-get install --assume-yes libtesseract-dev,sudo -H pip3 install tesserocr,sudo apt-get install --assume-yes tesseract-ocr-all,sudo -H pip3 install opencv-python,sudo -H pip3 install PyPDF2,sudo -H pip3 install imutils,sudo -H pip3 install ocrmypdf,sudo -H pip3 install scikit-image,sudo -H pip3 install scipy

libdir_path=/usr/lib

[ubuntu:18.04:cups]
packages=libcups2

[ubuntu:18.04:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[ubuntu:18.04:gcc]
packages=build-essential

[ubuntu:18.04:gs]
packages=ghostscript

[ubuntu:18.04:libcrypto]
packages=openssl

[ubuntu:18.04:libjpeg]
packages=libjpeg-dev

[ubuntu:18.04:libnetsnmp-devel]
packages=libsnmp-dev,snmp-mibs-downloader

[ubuntu:18.04:libpthread]
packages=build-essential

[ubuntu:18.04:libtool]
packages=libtool,libtool-bin

[ubuntu:18.04:libusb]
packages=libusb-1.0.0-dev,libusb-0.1-4

[ubuntu:18.04:make]
packages=build-essential

[ubuntu:18.04:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[ubuntu:18.04:pyqt]
packages=gtk2-engines-pixbuf,python-qt4

[ubuntu:18.04:python-devel]
packages=python-dev

[ubuntu:18.04:pyqt4]
packages=gtk2-engines-pixbuf,python-qt4

[ubuntu:18.04:pyqt4-dbus]
packages=python-qt4-dbus

[ubuntu:18.04:pyqt5]
packages=gtk2-engines-pixbuf,python-pyqt5

[ubuntu:18.04:pyqt5-dbus]
packages=python-dbus.mainloop.pyqt5

#[ubuntu:18.04:python23]
#packages=python

[ubuntu:18.04:python2X]
packages=python

[ubuntu:18.04:reportlab]
packages=python-reportlab

[ubuntu:18.04:sane]
packages=libsane

[ubuntu:18.04:sane-devel]
packages=libsane-dev

[ubuntu:18.04:scanimage]
packages=sane-utils

[ubuntu:18.04:xsane]
packages=gtk2-engines-pixbuf,xsane

[ubuntu:18.04:python-dbus]
packages=python-dbus,python-gobject

[ubuntu:18.04:dbus]
packages=libdbus-1-dev

[ubuntu:18.04:cups-image]
packages=libcupsimage2-dev

[ubuntu:18.04:cups-ddk]
packages=cups

[ubuntu:18.04:policykit]
packages=policykit-1,policykit-1-gnome

[ubuntu:18.04:python-notify]
packages=python-notify

[ubuntu:18.04:network]
packages=wget

[ubuntu:18.04:avahi-utils]
packages=avahi-utils

[ubuntu:18.04:python3-notify2]
packages=python3-notify2

[ubuntu:18.04:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt

[ubuntu:18.04:python3-pyqt4]
packages=python3-pyqt4,gtk2-engines-pixbuf

[ubuntu:18.04:python3-pyqt5-dbus]
packages=python3-dbus.mainloop.pyqt5

[ubuntu:18.04:python3-pyqt5]
packages=python3-pyqt5,gtk2-engines-pixbuf

[ubuntu:18.04:python3-dbus]
packages=python3-dbus,python3-gi

[ubuntu:18.04:python3-xml]
packages=python3-lxml

[ubuntu:18.04:python3-devel]
packages=python3-dev

[ubuntu:18.04:python3-pil]
packages=python3-pil

[ubuntu:18.04:python3-reportlab]
packages=python3-reportlab

[ubuntu:18.04:automake]
packages=automake1.11

[ubuntu:18.04:epm]
packages=epm

# ****************************************

[ubuntu:18.10]
code_name=Cosmic Cuttlefish
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.18.11
release_date=18/10/2018
notes=Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
native_cups=1
acl_rules=1
#scanjet_depend_cmd=sudo apt-get install --assume-yes python-pip,sudo pip2 install --upgrade pip,sudo apt-get install --assume-yes libleptonica-dev,sudo apt-get install --assume-yes tesseract-ocr,sudo apt-get install --assume-yes libtesseract-dev,sudo -H pip2 install tesserocr,sudo apt-get install --assume-yes tesseract-ocr-all,sudo apt-get install --assume-yes libzbar-dev,sudo apt-get install --assume-yes python-zbar,sudo -H pip2 install opencv-python,sudo -H pip2 install PyPDF2,sudo -H pip2 install imutils,sudo -H pip2 install pypdfocr,sudo -H pip2 install scikit-image,sudo -H pip2 install scipy
#scanjet_py3_depend_cmd=sudo apt-get install --assume-yes python3-pip,sudo pip3 install --upgrade pip,sudo apt-get install --assume-yes libleptonica-dev,sudo apt-get install --assume-yes tesseract-ocr,sudo apt-get install --assume-yes libtesseract-dev,sudo -H pip3 install tesserocr,sudo apt-get install --assume-yes tesseract-ocr-all,sudo -H pip3 install opencv-python,sudo -H pip3 install PyPDF2,sudo -H pip3 install imutils,sudo -H pip3 install ocrmypdf,sudo -H pip3 install scikit-image,sudo -H pip3 install scipy

libdir_path=/usr/lib

[ubuntu:18.10:cups]
packages=libcups2

[ubuntu:18.10:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[ubuntu:18.10:gcc]
packages=build-essential

[ubuntu:18.10:gs]
packages=ghostscript

[ubuntu:18.10:libcrypto]
packages=openssl

[ubuntu:18.10:libjpeg]
packages=libjpeg-dev

[ubuntu:18.10:libatk-adaptor]
packages=libatk-adaptor

[ubuntu:18.10:libgail-common]
packages=libgail-common

[ubuntu:18.10:libnetsnmp-devel]
packages=libsnmp-dev,snmp-mibs-downloader

[ubuntu:18.10:libpthread]
packages=build-essential

[ubuntu:18.10:libtool]
packages=libtool,libtool-bin

[ubuntu:18.10:libusb]
packages=libusb-1.0.0-dev,libusb-0.1-4

[ubuntu:18.10:make]
packages=build-essential

[ubuntu:18.10:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[ubuntu:18.10:pyqt]
packages=gtk2-engines-pixbuf,python-qt4

[ubuntu:18.10:python-devel]
packages=python-dev

[ubuntu:18.10:pyqt4]
packages=gtk2-engines-pixbuf,python-qt4

[ubuntu:18.10:pyqt4-dbus]
packages=python-qt4-dbus

[ubuntu:18.10:pyqt5]
packages=gtk2-engines-pixbuf,python-pyqt5

[ubuntu:18.10:pyqt5-dbus]
packages=python-dbus.mainloop.pyqt5

#[ubuntu:18.10:python23]
#packages=python

[ubuntu:18.10:python2X]
packages=python

[ubuntu:18.10:reportlab]
packages=python-reportlab

[ubuntu:18.10:sane]
packages=libsane

[ubuntu:18.10:sane-devel]
packages=libsane-dev

[ubuntu:18.10:scanimage]
packages=sane-utils

[ubuntu:18.10:xsane]
packages=gtk2-engines-pixbuf,xsane

[ubuntu:18.10:python-dbus]
packages=python-dbus,python-gobject

[ubuntu:18.10:dbus]
packages=libdbus-1-dev

[ubuntu:18.10:cups-image]
packages=libcupsimage2-dev

[ubuntu:18.10:cups-ddk]
packages=cups

[ubuntu:18.10:policykit]
packages=policykit-1,policykit-1-gnome

[ubuntu:18.10:python-notify]
packages=python-notify

[ubuntu:18.10:network]
packages=wget

[ubuntu:18.10:avahi-utils]
packages=avahi-utils

[ubuntu:18.10:python3-notify2]
packages=python3-notify2

[ubuntu:18.10:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt

[ubuntu:18.10:python3-pyqt4]
packages=python3-pyqt4,gtk2-engines-pixbuf

[ubuntu:18.10:python3-pyqt5-dbus]
packages=python3-dbus.mainloop.pyqt5

[ubuntu:18.10:python3-pyqt5]
packages=python3-pyqt5,gtk2-engines-pixbuf

[ubuntu:18.10:python3-dbus]
packages=python3-dbus,python3-gi

[ubuntu:18.10:python3-xml]
packages=python3-lxml

[ubuntu:18.10:python3-devel]
packages=python3-dev

[ubuntu:18.10:python3-pil]
packages=python3-pil

[ubuntu:18.10:python3-reportlab]
packages=python3-reportlab

[ubuntu:18.10:automake]
packages=automake1.11

[ubuntu:18.10:epm]
packages=epm

# ****************************************

[ubuntu:19.04]
code_name=Cosmic Cuttlefish
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.18.11
release_date=18/10/2018
notes=Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
native_cups=1
acl_rules=1
#scanjet_depend_cmd=sudo apt-get install --assume-yes python-pip,sudo pip2 install --upgrade pip,sudo apt-get install --assume-yes libleptonica-dev,sudo apt-get install --assume-yes tesseract-ocr,sudo apt-get install --assume-yes libtesseract-dev,sudo -H pip2 install tesserocr,sudo apt-get install --assume-yes tesseract-ocr-all,sudo apt-get install --assume-yes libzbar-dev,sudo apt-get install --assume-yes python-zbar,sudo -H pip2 install opencv-python,sudo -H pip2 install PyPDF2,sudo -H pip2 install imutils,sudo -H pip2 install pypdfocr,sudo -H pip2 install scikit-image,sudo -H pip2 install scipy
#scanjet_py3_depend_cmd=sudo apt-get install --assume-yes python3-pip,sudo pip3 install --upgrade pip,sudo apt-get install --assume-yes libleptonica-dev,sudo apt-get install --assume-yes tesseract-ocr,sudo apt-get install --assume-yes libtesseract-dev,sudo -H pip3 install tesserocr,sudo apt-get install --assume-yes tesseract-ocr-all,sudo -H pip3 install opencv-python,sudo -H pip3 install PyPDF2,sudo -H pip3 install imutils,sudo -H pip3 install ocrmypdf,sudo -H pip3 install scikit-image,sudo -H pip3 install scipy

libdir_path=/usr/lib

[ubuntu:19.04:cups]
packages=libcups2

[ubuntu:19.04:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[ubuntu:19.04:gcc]
packages=build-essential

[ubuntu:19.04:gs]
packages=ghostscript

[ubuntu:19.04:libcrypto]
packages=openssl

[ubuntu:19.04:libjpeg]
packages=libjpeg-dev

[ubuntu:19.04:libatk-adaptor]
packages=libatk-adaptor

[ubuntu:19.04:libgail-common]
packages=libgail-common

[ubuntu:19.04:libnetsnmp-devel]
packages=libsnmp-dev,snmp-mibs-downloader

[ubuntu:19.04:libpthread]
packages=build-essential

[ubuntu:19.04:libtool]
packages=libtool,libtool-bin

[ubuntu:19.04:libusb]
packages=libusb-1.0.0-dev,libusb-0.1-4

[ubuntu:19.04:make]
packages=build-essential

[ubuntu:19.04:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[ubuntu:19.04:pyqt]
packages=gtk2-engines-pixbuf,python-qt4

[ubuntu:19.04:python-devel]
packages=python-dev

[ubuntu:19.04:pyqt4]
packages=gtk2-engines-pixbuf,python-qt4

[ubuntu:19.04:pyqt4-dbus]
packages=python-qt4-dbus

[ubuntu:19.04:pyqt5]
packages=gtk2-engines-pixbuf,python-pyqt5

[ubuntu:19.04:pyqt5-dbus]
packages=python-dbus.mainloop.pyqt5

#[ubuntu:19.04:python23]
#packages=python

[ubuntu:19.04:python2X]
packages=python

[ubuntu:19.04:reportlab]
packages=python-reportlab

[ubuntu:19.04:sane]
packages=libsane

[ubuntu:19.04:sane-devel]
packages=libsane-dev

[ubuntu:19.04:scanimage]
packages=sane-utils

[ubuntu:19.04:xsane]
packages=gtk2-engines-pixbuf,xsane

[ubuntu:19.04:python-dbus]
packages=python-dbus,python-gobject

[ubuntu:19.04:dbus]
packages=libdbus-1-dev

[ubuntu:19.04:cups-image]
packages=libcupsimage2-dev

[ubuntu:19.04:cups-ddk]
packages=cups

[ubuntu:19.04:policykit]
packages=policykit-1,policykit-1-gnome

[ubuntu:19.04:python-notify]
packages=python-notify

[ubuntu:19.04:network]
packages=wget

[ubuntu:19.04:avahi-utils]
packages=avahi-utils

[ubuntu:19.04:python3-notify2]
packages=python3-notify2

[ubuntu:19.04:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt

[ubuntu:19.04:python3-pyqt4]
packages=python3-pyqt4,gtk2-engines-pixbuf

[ubuntu:19.04:python3-pyqt5-dbus]
packages=python3-dbus.mainloop.pyqt5

[ubuntu:19.04:python3-pyqt5]
packages=python3-pyqt5,gtk2-engines-pixbuf

[ubuntu:19.04:python3-dbus]
packages=python3-dbus,python3-gi

[ubuntu:19.04:python3-xml]
packages=python3-lxml

[ubuntu:19.04:python3-devel]
packages=python3-dev

[ubuntu:19.04:python3-pil]
packages=python3-pil

[ubuntu:19.04:python3-reportlab]
packages=python3-reportlab

[ubuntu:19.04:automake]
packages=automake1.11

[ubuntu:19.04:epm]
packages=epm


# ****************************************

[ubuntu:19.10]
code_name=Eoan Ermine
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.19.10
release_date=26/10/2019
notes=Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
native_cups=1
acl_rules=1
#scanjet_depend_cmd=sudo apt-get install --assume-yes python-pip,sudo pip2 install --upgrade pip,sudo apt-get install --assume-yes libleptonica-dev,sudo apt-get install --assume-yes tesseract-ocr,sudo apt-get install --assume-yes libtesseract-dev,sudo -H pip2 install tesserocr,sudo apt-get install --assume-yes tesseract-ocr-all,sudo apt-get install --assume-yes libzbar-dev,sudo apt-get install --assume-yes python-zbar,sudo -H pip2 install opencv-python,sudo -H pip2 install PyPDF2,sudo -H pip2 install imutils,sudo -H pip2 install pypdfocr,sudo -H pip2 install scikit-image,sudo -H pip2 install scipy
#scanjet_py3_depend_cmd=sudo apt-get install --assume-yes python3-pip,sudo pip3 install --upgrade pip,sudo apt-get install --assume-yes libleptonica-dev,sudo apt-get install --assume-yes tesseract-ocr,sudo apt-get install --assume-yes libtesseract-dev,sudo -H pip3 install tesserocr,sudo apt-get install --assume-yes tesseract-ocr-all,sudo -H pip3 install opencv-python,sudo -H pip3 install PyPDF2,sudo -H pip3 install imutils,sudo -H pip3 install ocrmypdf,sudo -H pip3 install scikit-image,sudo -H pip3 install scipy

libdir_path=/usr/lib

[ubuntu:19.10:cups]
packages=libcups2

[ubuntu:19.10:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[ubuntu:19.10:gcc]
packages=build-essential

[ubuntu:19.10:gs]
packages=ghostscript

[ubuntu:19.10:libcrypto]
packages=openssl

[ubuntu:19.10:libjpeg]
packages=libjpeg-dev

[ubuntu:19.10:libatk-adaptor]
packages=libatk-adaptor

[ubuntu:19.10:libgail-common]
packages=libgail-common

[ubuntu:19.10:libnetsnmp-devel]
packages=libsnmp-dev,snmp-mibs-downloader

[ubuntu:19.10:libpthread]
packages=build-essential

[ubuntu:19.10:libtool]
packages=libtool,libtool-bin

[ubuntu:19.10:libusb]
packages=libusb-1.0.0-dev,libusb-0.1-4

[ubuntu:19.10:make]
packages=build-essential

[ubuntu:19.10:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[ubuntu:19.10:pyqt]
packages=gtk2-engines-pixbuf,python-qt4

[ubuntu:19.10:python-devel]
packages=python-dev

[ubuntu:19.10:pyqt4]
packages=gtk2-engines-pixbuf,python-qt4

[ubuntu:19.10:pyqt4-dbus]
packages=python-qt4-dbus

[ubuntu:19.10:pyqt5]
packages=gtk2-engines-pixbuf,python-pyqt5

[ubuntu:19.10:pyqt5-dbus]
packages=python-dbus.mainloop.pyqt5

#[ubuntu:19.10:python23]
#packages=python

[ubuntu:19.10:python2X]
packages=python

[ubuntu:19.10:reportlab]
packages=python-reportlab

[ubuntu:19.10:sane]
packages=libsane

[ubuntu:19.10:sane-devel]
packages=libsane-dev

[ubuntu:19.10:scanimage]
packages=sane-utils

[ubuntu:19.10:xsane]
packages=gtk2-engines-pixbuf,xsane

[ubuntu:19.10:python-dbus]
packages=python-dbus,python-gobject

[ubuntu:19.10:dbus]
packages=libdbus-1-dev

[ubuntu:19.10:cups-image]
packages=libcupsimage2-dev

[ubuntu:19.10:cups-ddk]
packages=cups

[ubuntu:19.10:policykit]
packages=policykit-1,policykit-1-gnome

[ubuntu:19.10:python-notify]
packages=python-notify

[ubuntu:19.10:network]
packages=wget

[ubuntu:19.10:avahi-utils]
packages=avahi-utils

[ubuntu:19.10:python3-notify2]
packages=python3-notify2

[ubuntu:19.10:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt

[ubuntu:19.10:python3-pyqt4]
packages=python3-pyqt4,gtk2-engines-pixbuf

[ubuntu:19.10:python3-pyqt5-dbus]
packages=python3-dbus.mainloop.pyqt5

[ubuntu:19.10:python3-pyqt5]
packages=python3-pyqt5,gtk2-engines-pixbuf

[ubuntu:19.10:python3-dbus]
packages=python3-dbus,python3-gi

[ubuntu:19.10:python3-xml]
packages=python3-lxml

[ubuntu:19.10:python3-devel]
packages=python3-dev

[ubuntu:19.10:python3-pil]
packages=python3-pil

[ubuntu:19.10:python3-reportlab]
packages=python3-reportlab

[ubuntu:19.10:automake]
packages=automake1.11

[ubuntu:19.10:epm]
packages=epm


# ****************************************
[debian]
index=2
versions=6.0,6.0.1,6.0.2,6.0.3,6.0.4,6.0.5,6.0.6,6.0.7,6.0.8,6.0.9,6.0.10,7.0,7.1,7.2,7.3,7.4,7.5,7.6,7.7,7.8,7.9,8.0,8.1,8.2,8.3,8.4,8.5,8.6,8.7,8.8,9.1,9.2,9.3,9.4,9.5,9.6,9.7,9.8,9.9,10.0,10.1,10.2
display_name=Debian
alt_names=
display=1
notes=
package_mgrs=dpkg,apt-get,synaptic,update-manager,adept,aptitude
package_mgr_cmd=su -c "apt-get install --force-yes -y $packages_to_install"
pre_depend_cmd=su -c "dpkg --configure -a",su -c "apt-get install -f",su -c "apt-get update"
post_depend_cmd=
#su -c "apt-get install --force-yes -y python-qt4",su -c "apt-get install --force-yes -y python-qt4-dbus",
scanjet_depend_cmd=su -c "apt-get install --force-yes -y python-pip",su -c "pip install --upgrade pip",su -c "apt-get install --force-yes -y libleptonica-dev",su -c "apt-get install --force-yes -y tesseract-ocr",su -c "apt-get install --force-yes -y libtesseract-dev",su -c "pip install tesserocr",su -c "apt-get install --force-yes -y libzbar-dev",su -c "apt-get install --force-yes -y python-zbar",su -c "apt-get install --force-yes -y python-opencv",su -c "apt-get install --force-yes -y python-pypdf2",su -c "pip install imutils",su -c "pip install pypdfocr",su -c "pip install scikit-image",su -c "pip install scipy"
#su -c "apt-get install --force-yes -y tesseract-ocr-all",
#su -c "apt-get install --force-yes -y python3-pyqt4",su -c "apt-get install --force-yes -y gtk2-engines-pixbuf",su -c "apt-get install --force-yes -y python3-dbus.mainloop.qt",
scanjet_py3_depend_cmd=su -c "apt-get install --force-yes -y python3-pip",su -c "pip3 install --upgrade pip",su -c "apt-get install --force-yes -y libleptonica-dev",su -c "apt-get install --force-yes -y tesseract-ocr",su -c "apt-get install --force-yes -y libtesseract-dev",su -c "pip3 install tesserocr",su -c "pip3 install opencv-python",su -c "pip3 install PyPDF2",su -c "pip3 install imutils,su -c "pip3 install ocrmypdf",su -c "pip3 install scikit-image",su -c "pip3 install scipy"
#su -c "apt-get install --force-yes -y tesseract-ocr-all",
hplip_remove_cmd=su -c "apt-get remove --yes hplip hpijs hplip-data"
su_sudo=su
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP

# ********************
[debian:6.0]
code_name=Squeeze
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=2.8.6
release_date=
notes=NOTE: Disable the CD Sources in your apt sources.list or the install will fail and hang.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
native_cups=1
policykit=0


[debian:6.0:cups]
packages=cups,libcups2

[debian:6.0:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[debian:6.0:gcc]
packages=g++

[debian:6.0:gs]
packages=gs-esp

[debian:6.0:libcrypto]
packages=libssl-dev

[debian:6.0:libjpeg]
packages=libjpeg62-dev

[debian:6.0:libnetsnmp-devel]
packages=libsnmp-dev

[debian:6.0:libpthread]
packages=libc6

[debian:6.0:libtool]
packages=libtool

[debian:6.0:libusb]
packages=libusb-1.0.0-dev

[debian:6.0:make]
packages=make

[debian:6.0:pil]
packages=python-imaging

[debian:6.0:ppdev]
packages=
commands=su -c "modprobe ppdev",su -c cp -f /etc/modules /etc/modules.hplip,echo ppdev | su -c tee -a /etc/modules

[debian:6.0:pyqt]
packages=python-qt3

[debian:6.0:python-devel]
packages=python-dev

[debian:6.0:pyqt4]
packages=python-qt4

[debian:6.0:pyqt4-dbus]
packages=python-qt4-dbus

[debian:6.0:python23]
packages=python

[debian:6.0:python2X]
packages=python

[debian:6.0:reportlab]
packages=python-reportlab

[debian:6.0:sane]
packages=sane

[debian:6.0:sane-devel]
packages=libsane-dev

[debian:6.0:scanimage]
packages=sane-utils

[debian:6.0:xsane]
packages=xsane

[debian:6.0:cups-ddk]
packages=

[debian:6.0:python-dbus]
packages=python-dbus,python-gobject

[debian:6.0:dbus]
packages=libdbus-1-dev

[debian:6.0:python-ctypes]
packages=python-ctypes

[debian:6.0:cups-image]
packages=libcupsimage2,libcupsimage2-dev

[debian:6.0:policykit]
packages=policykit-1,policykit-1-gnome

[debian:6.0:python-notify]
packages=python-notify

[debian:6.0:network]
packages=wget

[debian:6.0:avahi-utils]
packages=avahi-utils

[debian:6.0:automake]
packages=automake1.11

[debian:6.0:epm]
packages=epm

# *********************
[debian:6.0.1]
same_as_version=6.0

[debian:6.0.2]
same_as_version=6.0

[debian:6.0.3]
same_as_version=6.0

[debian:6.0.4]
same_as_version=6.0

[debian:6.0.5]
same_as_version=6.0

[debian:6.0.6]
same_as_version=6.0

[debian:6.0.7]
same_as_version=6.0

[debian:6.0.8]
same_as_version=6.0

[debian:6.0.9]
same_as_version=6.0

[debian:6.0.10]
same_as_version=6.0

# *********************

[debian:7.0]
code_name=Wheezy
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.12.6
release_date=04/05/2013
notes=NOTE: Disable the CD Sources in your apt sources.list or the install will fail and hang.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
native_cups=1
policykit=0

# This libdir_path will be used only for 64 bit machine.
libdir_path=/usr/lib/x86_64-linux-gnu

[debian:7.0:cups]
packages=cups,libcups2

[debian:7.0:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[debian:7.0:gcc]
packages=g++

[debian:7.0:gs]
packages=ghostscript,ghostscript-cups,ghostscript-x

[debian:7.0:libcrypto]
packages=libssl-dev

[debian:7.0:libjpeg]
packages=libjpeg8-dev

[debian:7.0:libnetsnmp-devel]
packages=libsnmp-dev

[debian:7.0:libpthread]
packages=libc6

[debian:7.0:libtool]
packages=libtool

[debian:7.0:libusb]
packages=libusb-1.0.0-dev

[debian:7.0:make]
packages=make

[debian:7.0:pil]
packages=python-imaging

[debian:7.0:ppdev]
packages=
commands=su -c "modprobe ppdev",su -c cp -f /etc/modules /etc/modules.hplip,echo ppdev | su -c tee -a /etc/modules

[debian:7.0:pyqt]
packages=python-qt3

[debian:7.0:python-devel]
packages=python-dev

[debian:7.0:pyqt4]
packages=python-qt4

[debian:7.0:pyqt4-dbus]
packages=python-qt4-dbus

[debian:7.0:python23]
packages=python

[debian:7.0:python2X]
packages=python

[debian:7.0:reportlab]
packages=python-reportlab

[debian:7.0:sane]
packages=sane

[debian:7.0:sane-devel]
packages=libsane-dev

[debian:7.0:scanimage]
packages=sane-utils

[debian:7.0:xsane]
packages=xsane

[debian:7.0:cups-ddk]
packages=

[debian:7.0:python-dbus]
packages=python-dbus,python-gobject

[debian:7.0:dbus]
packages=libdbus-1-dev

[debian:7.0:python-ctypes]
packages=python-ctypes

[debian:7.0:cups-image]
packages=libcupsimage2,libcupsimage2-dev

[debian:7.0:policykit]
packages=policykit-1,policykit-1-gnome

[debian:7.0:python-notify]
packages=python-notify

[debian:7.0:network]
packages=wget

[debian:7.0:avahi-utils]
packages=avahi-utils

[debian:7.0:python3-notify2]
packages=python3-notify2

[debian:7.0:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt

[debian:7.0:python3-pyqt4]
packages=python3-pyqt4,gtk2-engines-pixbuf

[debian:7.0:python3-dbus]
packages=python3-dbus,python3-gi

[debian:7.0:python3-xml]
packages=python3-lxml

[debian:7.0:python3-devel]
packages=python3-dev

[debian:7.0:python3-pil]
packages=PKG_FROM_PIP:pillow

[debian:7.0:python3-reportlab]
packages=python3-reportlab

[debian:7.0:automake]
packages=automake1.11

[debian:7.0:epm]
packages=epm


# ****************************************

[debian:7.1]
same_as_version=7.0

[debian:7.2]
same_as_version=7.0

[debian:7.3]
same_as_version=7.0

[debian:7.4]
same_as_version=7.0

[debian:7.5]
same_as_version=7.0

[debian:7.6]
same_as_version=7.0

[debian:7.7]
same_as_version=7.0

[debian:7.8]
same_as_version=7.0

[debian:7.9]
same_as_version=7.0


# *********************

[debian:8.0]
code_name=Jessie
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.14.6
release_date=04/05/2015
notes=NOTE: Disable the CD Sources in your apt sources.list or the install will fail and hang.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
native_cups=1
policykit=0

# This libdir_path will be used only for 64 bit machine.
libdir_path=/usr/lib/x86_64-linux-gnu

[debian:8.0:cups]
packages=cups,libcups2

[debian:8.0:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[debian:8.0:gcc]
packages=g++

[debian:8.0:gs]
packages=ghostscript,ghostscript-cups,ghostscript-x

[debian:8.0:libcrypto]
packages=libssl-dev

[debian:8.0:libjpeg]
packages=libjpeg62-turbo-dev

[debian:8.0:libnetsnmp-devel]
packages=libsnmp-dev,snmp

[debian:8.0:libpthread]
packages=libc6

[debian:8.0:libtool]
packages=libtool,libtool-bin

[debian:8.0:libusb]
packages=libusb-1.0.0-dev

[debian:8.0:make]
packages=make

[debian:8.0:pil]
packages=python-imaging

[debian:8.0:ppdev]
packages=
commands=su -c "modprobe ppdev",su -c cp -f /etc/modules /etc/modules.hplip,echo ppdev | su -c tee -a /etc/modules

[debian:8.0:pyqt]
packages=python-qt3

[debian:8.0:python-devel]
packages=python-dev

[debian:8.0:pyqt4]
packages=python-qt4

[debian:8.0:pyqt4-dbus]
packages=python-qt4-dbus

[debian:8.0:python23]
packages=python

[debian:8.0:python2X]
packages=python

[debian:8.0:reportlab]
packages=python-reportlab

[debian:8.0:sane]
packages=sane

[debian:8.0:sane-devel]
packages=libsane-dev

[debian:8.0:scanimage]
packages=sane-utils

[debian:8.0:xsane]
packages=xsane

[debian:8.0:cups-ddk]
packages=

[debian:8.0:python-dbus]
packages=python-dbus,python-gobject

[debian:8.0:dbus]
packages=libdbus-1-dev

[debian:8.0:python-ctypes]
packages=python-ctypes

[debian:8.0:cups-image]
packages=libcupsimage2,libcupsimage2-dev

[debian:8.0:policykit]
packages=policykit-1,policykit-1-gnome

[debian:8.0:python-notify]
packages=python-notify

[debian:8.0:network]
packages=wget

[debian:8.0:avahi-utils]
packages=avahi-utils

[debian:8.0:gtk]
packages=libcanberra-gtk-module

[debian:8.0:python3-notify2]
packages=python3-notify2

[debian:8.0:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt

[debian:8.0:python3-pyqt4]
packages=python3-pyqt4,gtk2-engines-pixbuf

[debian:8.0:python3-dbus]
packages=python3-dbus,python3-gi

[debian:8.0:python3-xml]
packages=python3-lxml

[debian:8.0:python3-devel]
packages=python3-dev

[debian:8.0:python3-pil]
packages=python3-pil

[debian:8.0:python3-reportlab]
packages=python3-reportlab

[debian:8.0:automake]
packages=automake1.11

[debian:8.0:epm]
packages=epm


# *********************

[debian:8.1]
same_as_version=8.0

# *********************

[debian:8.2]
same_as_version=8.0

# *********************

[debian:8.3]
same_as_version=8.0

# *********************

[debian:8.4]
code_name=Jessie
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.14.6
release_date=04/05/2016
notes=NOTE: Disable the CD Sources in your apt sources.list or the install will fail and hang.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt5
native_cups=1
policykit=0

# This libdir_path will be used only for 64 bit machine.
libdir_path=/usr/lib/x86_64-linux-gnu

[debian:8.4:cups]
packages=cups,libcups2

[debian:8.4:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[debian:8.4:gcc]
packages=g++

[debian:8.4:gs]
packages=ghostscript,ghostscript-cups,ghostscript-x

[debian:8.4:libcrypto]
packages=libssl-dev

[debian:8.4:libjpeg]
packages=libjpeg62-turbo-dev

[debian:8.4:libnetsnmp-devel]
packages=libsnmp-dev,snmp

[debian:8.4:libpthread]
packages=libc6

[debian:8.4:libtool]
packages=libtool,libtool-bin

[debian:8.4:libusb]
packages=libusb-1.0.0-dev

[debian:8.4:make]
packages=make

[debian:8.4:pil]
packages=python-imaging

[debian:8.4:ppdev]
packages=
commands=su -c "modprobe ppdev",su -c cp -f /etc/modules /etc/modules.hplip,echo ppdev | su -c tee -a /etc/modules

[debian:8.4:pyqt]
packages=python-qt3

[debian:8.4:python-devel]
packages=python-dev

[debian:8.4:pyqt4]
packages=python-qt4

[debian:8.4:pyqt4-dbus]
packages=python-qt4-dbus

[debian:8.4:python23]
packages=python

[debian:8.4:python2X]
packages=python

[debian:8.4:reportlab]
packages=python-reportlab

[debian:8.4:sane]
packages=sane

[debian:8.4:sane-devel]
packages=libsane-dev

[debian:8.4:scanimage]
packages=sane-utils

[debian:8.4:xsane]
packages=xsane

[debian:8.4:cups-ddk]
packages=

[debian:8.4:python-dbus]
packages=python-dbus,python-gobject

[debian:8.4:dbus]
packages=libdbus-1-dev

[debian:8.4:python-ctypes]
packages=python-ctypes

[debian:8.4:cups-image]
packages=libcupsimage2,libcupsimage2-dev

[debian:8.4:policykit]
packages=policykit-1,policykit-1-gnome

[debian:8.4:python-notify]
packages=python-notify

[debian:8.4:network]
packages=wget

[debian:8.4:avahi-utils]
packages=avahi-utils

[debian:8.4:gtk]
packages=libcanberra-gtk-module

[debian:8.4:python3-notify2]
packages=python3-notify2

[debian:8.4:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt

[debian:8.4:python3-pyqt4]
packages=python3-pyqt4,gtk2-engines-pixbuf

[debian:8.4:python3-dbus]
packages=python3-dbus,python3-gi

[debian:8.4:python3-xml]
packages=python3-lxml

[debian:8.4:python3-devel]
packages=python3-dev

[debian:8.4:python3-pil]
packages=python3-pil

[debian:8.4:python3-reportlab]
packages=python3-reportlab

[debian:8.4:python3-pyqt5-dbus]
packages=python3-dbus.mainloop.pyqt5

[debian:8.4:python3-pyqt5]
packages=python3-pyqt5,gtk2-engines-pixbuf

[debian:8.4:pyqt5]
packages=gtk2-engines-pixbuf,python-pyqt5

[debian:8.4:pyqt5-dbus]
packages=python-dbus.mainloop.pyqt5

[debian:8.4:automake]
packages=automake1.11

[debian:8.4:epm]
packages=epm


# *********************

[debian:8.5]
code_name=Jessie
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.16.8
release_date=27/08/2016
notes=NOTE: Disable the CD Sources in your apt sources.list or the install will fail and hang.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt5
native_cups=1
policykit=0

# This libdir_path will be used only for 64 bit machine.
libdir_path=/usr/lib/x86_64-linux-gnu

[debian:8.5:cups]
packages=cups,libcups2

[debian:8.5:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[debian:8.5:gcc]
packages=g++

[debian:8.5:gs]
packages=ghostscript,ghostscript-cups,ghostscript-x

[debian:8.5:libcrypto]
packages=libssl-dev

[debian:8.5:libjpeg]
packages=libjpeg62-turbo-dev

[debian:8.5:libnetsnmp-devel]
packages=libsnmp-dev,snmp

[debian:8.5:libpthread]
packages=libc6

[debian:8.5:libtool]
packages=libtool,libtool-bin

[debian:8.5:libusb]
packages=libusb-1.0.0-dev

[debian:8.5:make]
packages=make

[debian:8.5:pil]
packages=python-imaging

[debian:8.5:ppdev]
packages=
commands=su -c "modprobe ppdev",su -c cp -f /etc/modules /etc/modules.hplip,echo ppdev | su -c tee -a /etc/modules

[debian:8.5:pyqt]
packages=python-qt3

[debian:8.5:python-devel]
packages=python-dev

[debian:8.5:pyqt4]
packages=python-qt4

[debian:8.5:pyqt4-dbus]
packages=python-qt4-dbus

[debian:8.5:python23]
packages=python

[debian:8.5:python2X]
packages=python

[debian:8.5:reportlab]
packages=python-reportlab

[debian:8.5:sane]
packages=sane

[debian:8.5:sane-devel]
packages=libsane-dev

[debian:8.5:scanimage]
packages=sane-utils

[debian:8.5:xsane]
packages=xsane

[debian:8.5:cups-ddk]
packages=

[debian:8.5:python-dbus]
packages=python-dbus,python-gobject

[debian:8.5:dbus]
packages=libdbus-1-dev

[debian:8.5:python-ctypes]
packages=python-ctypes

[debian:8.5:cups-image]
packages=libcupsimage2,libcupsimage2-dev

[debian:8.5:policykit]
packages=policykit-1,policykit-1-gnome

[debian:8.5:python-notify]
packages=python-notify

[debian:8.5:network]
packages=wget

[debian:8.5:avahi-utils]
packages=avahi-utils

[debian:8.5:gtk]
packages=libcanberra-gtk-module

[debian:8.5:python3-notify2]
packages=python3-notify2

[debian:8.5:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt

[debian:8.5:python3-pyqt4]
packages=python3-pyqt4,gtk2-engines-pixbuf

[debian:8.5:python3-dbus]
packages=python3-dbus,python3-gi

[debian:8.5:python3-xml]
packages=python3-lxml

[debian:8.5:python3-devel]
packages=python3-dev

[debian:8.5:python3-pil]
packages=python3-pil

[debian:8.5:python3-reportlab]
packages=python3-reportlab

[debian:8.5:python3-pyqt5-dbus]
packages=python3-dbus.mainloop.pyqt5

[debian:8.5:python3-pyqt5]
packages=python3-pyqt5,gtk2-engines-pixbuf

[debian:8.5:pyqt5]
packages=gtk2-engines-pixbuf,python-pyqt5

[debian:8.5:pyqt5-dbus]
packages=python-dbus.mainloop.pyqt5

[debian:8.5:automake]
packages=automake1.11

[debian:8.5:epm]
packages=epm


# *********************

[debian:8.6]
code_name=Jessie
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.16.10
release_date=22/10/2016
notes=NOTE: Disable the CD Sources in your apt sources.list or the install will fail and hang.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt5
native_cups=1
policykit=0
# This libdir_path will be used only for 64 bit machine.
libdir_path=/usr/lib/x86_64-linux-gnu
[debian:8.6:cups]
packages=cups,libcups2
[debian:8.6:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client
[debian:8.6:gcc]
packages=g++
[debian:8.6:gs]
packages=ghostscript,ghostscript-cups,ghostscript-x
[debian:8.6:libcrypto]
packages=libssl-dev
[debian:8.6:libjpeg]
packages=libjpeg62-turbo-dev
[debian:8.6:libnetsnmp-devel]
packages=libsnmp-dev,snmp
[debian:8.6:libpthread]
packages=libc6
[debian:8.6:libtool]
packages=libtool,libtool-bin
[debian:8.6:libusb]
packages=libusb-1.0.0-dev
[debian:8.6:make]
packages=make
[debian:8.6:pil]
packages=python-imaging
[debian:8.6:ppdev]
packages=
commands=su -c "modprobe ppdev",su -c cp -f /etc/modules /etc/modules.hplip,echo ppdev | su -c tee -a /etc/modules
[debian:8.6:pyqt]
packages=python-qt3
[debian:8.6:python-devel]
packages=python-dev
[debian:8.6:pyqt4]
packages=python-qt4
[debian:8.6:pyqt4-dbus]
packages=python-qt4-dbus
[debian:8.6:python23]
packages=python
[debian:8.6:python2X]
packages=python
[debian:8.6:reportlab]
packages=python-reportlab
[debian:8.6:sane]
packages=sane
[debian:8.6:sane-devel]
packages=libsane-dev
[debian:8.6:scanimage]
packages=sane-utils
[debian:8.6:xsane]
packages=xsane
[debian:8.6:cups-ddk]
packages=
[debian:8.6:python-dbus]
packages=python-dbus,python-gobject
[debian:8.6:dbus]
packages=libdbus-1-dev
[debian:8.6:python-ctypes]
packages=python-ctypes
[debian:8.6:cups-image]
packages=libcupsimage2,libcupsimage2-dev
[debian:8.6:policykit]
packages=policykit-1,policykit-1-gnome
[debian:8.6:python-notify]
packages=python-notify
[debian:8.6:network]
packages=wget
[debian:8.6:avahi-utils]
packages=avahi-utils
[debian:8.6:gtk]
packages=libcanberra-gtk-module
[debian:8.6:python3-notify2]
packages=python3-notify2
[debian:8.6:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt
[debian:8.6:python3-pyqt4]
packages=python3-pyqt4,gtk2-engines-pixbuf
[debian:8.6:python3-dbus]
packages=python3-dbus,python3-gi
[debian:8.6:python3-xml]
packages=python3-lxml
[debian:8.6:python3-devel]
packages=python3-dev
[debian:8.6:python3-pil]
packages=python3-pil
[debian:8.6:python3-reportlab]
packages=python3-reportlab
[debian:8.6:python3-pyqt5-dbus]
packages=python3-dbus.mainloop.pyqt5
[debian:8.6:python3-pyqt5]
packages=python3-pyqt5,gtk2-engines-pixbuf
[debian:8.6:pyqt5]
packages=gtk2-engines-pixbuf,python-pyqt5
[debian:8.6:pyqt5-dbus]
packages=python-dbus.mainloop.pyqt5

[debian:8.6:automake]
packages=automake1.11

[debian:8.6:epm]
packages=epm



# *********************

[debian:8.7]
code_name=Jessie
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.17.3
release_date=22/10/2016
notes=NOTE: Disable the CD Sources in your apt sources.list or the install will fail and hang.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt5
native_cups=1
policykit=0
# This libdir_path will be used only for 64 bit machine.
libdir_path=/usr/lib/x86_64-linux-gnu
[debian:8.7:cups]
packages=cups,libcups2
[debian:8.7:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client
[debian:8.7:gcc]
packages=g++
[debian:8.7:gs]
packages=ghostscript,ghostscript-cups,ghostscript-x
[debian:8.7:libcrypto]
packages=libssl-dev
[debian:8.7:libjpeg]
packages=libjpeg62-turbo-dev
[debian:8.7:libnetsnmp-devel]
packages=libsnmp-dev,snmp
[debian:8.7:libpthread]
packages=libc6
[debian:8.7:libtool]
packages=libtool,libtool-bin
[debian:8.7:libusb]
packages=libusb-1.0.0-dev
[debian:8.7:make]
packages=make
[debian:8.7:pil]
packages=python-imaging
[debian:8.7:ppdev]
packages=
commands=su -c "modprobe ppdev",su -c cp -f /etc/modules /etc/modules.hplip,echo ppdev | su -c tee -a /etc/modules
[debian:8.7:pyqt]
packages=python-qt3
[debian:8.7:python-devel]
packages=python-dev
[debian:8.7:pyqt4]
packages=python-qt4
[debian:8.7:pyqt4-dbus]
packages=python-qt4-dbus
[debian:8.7:python23]
packages=python
[debian:8.7:python2X]
packages=python
[debian:8.7:reportlab]
packages=python-reportlab
[debian:8.7:sane]
packages=sane
[debian:8.7:sane-devel]
packages=libsane-dev
[debian:8.7:scanimage]
packages=sane-utils
[debian:8.7:xsane]
packages=xsane
[debian:8.7:cups-ddk]
packages=
[debian:8.7:python-dbus]
packages=python-dbus,python-gobject
[debian:8.7:dbus]
packages=libdbus-1-dev
[debian:8.7:python-ctypes]
packages=python-ctypes
[debian:8.7:cups-image]
packages=libcupsimage2,libcupsimage2-dev
[debian:8.7:policykit]
packages=policykit-1,policykit-1-gnome
[debian:8.7:python-notify]
packages=python-notify
[debian:8.7:network]
packages=wget
[debian:8.7:avahi-utils]
packages=avahi-utils
[debian:8.7:gtk]
packages=libcanberra-gtk-module
[debian:8.7:python3-notify2]
packages=python3-notify2
[debian:8.7:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt
[debian:8.7:python3-pyqt4]
packages=python3-pyqt4,gtk2-engines-pixbuf
[debian:8.7:python3-dbus]
packages=python3-dbus,python3-gi
[debian:8.7:python3-xml]
packages=python3-lxml
[debian:8.7:python3-devel]
packages=python3-dev
[debian:8.7:python3-pil]
packages=python3-pil
[debian:8.7:python3-reportlab]
packages=python3-reportlab
[debian:8.7:python3-pyqt5-dbus]
packages=python3-dbus.mainloop.pyqt5
[debian:8.7:python3-pyqt5]
packages=python3-pyqt5,gtk2-engines-pixbuf
[debian:8.7:pyqt5]
packages=gtk2-engines-pixbuf,python-pyqt5
[debian:8.7:pyqt5-dbus]
packages=python-dbus.mainloop.pyqt5

[debian:8.7:automake]
packages=automake1.11

[debian:8.7:epm]
packages=epm



# *********************

[debian:8.8]
code_name=Jessie
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.17.5
release_date=31/05/2017
notes=NOTE: Disable the CD Sources in your apt sources.list or the install will fail and hang.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt5
native_cups=1
policykit=0
# This libdir_path will be used only for 64 bit machine.
libdir_path=/usr/lib/x86_64-linux-gnu
[debian:8.8:cups]
packages=cups,libcups2
[debian:8.8:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client
[debian:8.8:gcc]
packages=g++
[debian:8.8:gs]
packages=ghostscript,ghostscript-cups,ghostscript-x
[debian:8.8:libcrypto]
packages=libssl-dev
[debian:8.8:libjpeg]
packages=libjpeg62-turbo-dev
[debian:8.8:libnetsnmp-devel]
packages=libsnmp-dev,snmp
[debian:8.8:libpthread]
packages=libc6
[debian:8.8:libtool]
packages=libtool,libtool-bin
[debian:8.8:libusb]
packages=libusb-1.0.0-dev
[debian:8.8:make]
packages=make
[debian:8.8:pil]
packages=python-imaging
[debian:8.8:ppdev]
packages=
commands=su -c "modprobe ppdev",su -c cp -f /etc/modules /etc/modules.hplip,echo ppdev | su -c tee -a /etc/modules
[debian:8.8:pyqt]
packages=python-qt3
[debian:8.8:python-devel]
packages=python-dev
[debian:8.8:pyqt4]
packages=python-qt4
[debian:8.8:pyqt4-dbus]
packages=python-qt4-dbus
[debian:8.8:python23]
packages=python
[debian:8.8:python2X]
packages=python
[debian:8.8:reportlab]
packages=python-reportlab
[debian:8.8:sane]
packages=sane
[debian:8.8:sane-devel]
packages=libsane-dev
[debian:8.8:scanimage]
packages=sane-utils
[debian:8.8:xsane]
packages=xsane
[debian:8.8:cups-ddk]
packages=
[debian:8.8:python-dbus]
packages=python-dbus,python-gobject
[debian:8.8:dbus]
packages=libdbus-1-dev
[debian:8.8:python-ctypes]
packages=python-ctypes
[debian:8.8:cups-image]
packages=libcupsimage2,libcupsimage2-dev
[debian:8.8:policykit]
packages=policykit-1,policykit-1-gnome
[debian:8.8:python-notify]
packages=python-notify
[debian:8.8:network]
packages=wget
[debian:8.8:avahi-utils]
packages=avahi-utils
[debian:8.8:gtk]
packages=libcanberra-gtk-module
[debian:8.8:gtk-32bit]
packages=libcanberra-gtk-module:i386
[debian:8.8:python3-notify2]
packages=python3-notify2
[debian:8.8:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt
[debian:8.8:python3-pyqt4]
packages=python3-pyqt4,gtk2-engines-pixbuf
[debian:8.8:python3-dbus]
packages=python3-dbus,python3-gi
[debian:8.8:python3-xml]
packages=python3-lxml
[debian:8.8:python3-devel]
packages=python3-dev
[debian:8.8:python3-pil]
packages=python3-pil
[debian:8.8:python3-reportlab]
packages=python3-reportlab
[debian:8.8:python3-pyqt5-dbus]
packages=python3-dbus.mainloop.pyqt5
[debian:8.8:python3-pyqt5]
packages=python3-pyqt5,gtk2-engines-pixbuf
[debian:8.8:pyqt5]
packages=gtk2-engines-pixbuf,python-pyqt5
[debian:8.8:pyqt5-dbus]
packages=python-dbus.mainloop.pyqt5

[debian:8.8:automake]
packages=automake1.11

[debian:8.8:epm]
packages=epm


# *********************

[debian:9.1]
code_name=Stretch
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.17.10
release_date=22/07/2017
notes=NOTE: Disable the CD Sources in your apt sources.list or the install will fail and hang.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt5
native_cups=1
policykit=0
# This libdir_path will be used only for 64 bit machine.
libdir_path=/usr/lib/x86_64-linux-gnu
[debian:9.1:cups]
packages=cups,libcups2
[debian:9.1:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client
[debian:9.1:gcc]
packages=g++
[debian:9.1:gs]
packages=ghostscript,ghostscript-cups,ghostscript-x
[debian:9.1:libcrypto]
packages=libssl-dev
[debian:9.1:libjpeg]
packages=libjpeg62-turbo-dev
[debian:9.1:libnetsnmp-devel]
packages=libsnmp-dev,snmp
[debian:9.1:libpthread]
packages=libc6
[debian:9.1:libtool]
packages=libtool,libtool-bin
[debian:9.1:libusb]
packages=libusb-1.0.0-dev
[debian:9.1:make]
packages=make
[debian:9.1:pil]
packages=python-imaging
[debian:9.1:ppdev]
packages=
commands=su -c "modprobe ppdev",su -c cp -f /etc/modules /etc/modules.hplip,echo ppdev | su -c tee -a /etc/modules
[debian:9.1:pyqt]
packages=python-qt3
[debian:9.1:python-devel]
packages=python-dev
[debian:9.1:pyqt4]
packages=python-qt4
[debian:9.1:pyqt4-dbus]
packages=python-qt4-dbus
[debian:9.1:python23]
packages=python
[debian:9.1:python2X]
packages=python
[debian:9.1:reportlab]
packages=python-reportlab
[debian:9.1:sane]
packages=sane
[debian:9.1:sane-devel]
packages=libsane-dev
[debian:9.1:scanimage]
packages=sane-utils
[debian:9.1:xsane]
packages=xsane
[debian:9.1:cups-ddk]
packages=
[debian:9.1:python-dbus]
packages=python-dbus,python-gobject
[debian:9.1:dbus]
packages=libdbus-1-dev
[debian:9.1:python-ctypes]
packages=python-ctypes
[debian:9.1:cups-image]
packages=libcupsimage2,libcupsimage2-dev
[debian:9.1:policykit]
packages=policykit-1,policykit-1-gnome
[debian:9.1:python-notify]
packages=python-notify
[debian:9.1:network]
packages=wget
[debian:9.1:avahi-utils]
packages=avahi-utils
[debian:9.1:gtk]
packages=libcanberra-gtk-module
[debian:9.1:python3-notify2]
packages=python3-notify2
[debian:9.1:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt
[debian:9.1:python3-pyqt4]
packages=python3-pyqt4,gtk2-engines-pixbuf
[debian:9.1:python3-dbus]
packages=python3-dbus,python3-gi
[debian:9.1:python3-xml]
packages=python3-lxml
[debian:9.1:python3-devel]
packages=python3-dev
[debian:9.1:python3-pil]
packages=python3-pil
[debian:9.1:python3-reportlab]
packages=python3-reportlab
[debian:9.1:python3-pyqt5-dbus]
packages=python3-dbus.mainloop.pyqt5
[debian:9.1:python3-pyqt5]
packages=python3-pyqt5,gtk2-engines-pixbuf
[debian:9.1:pyqt5]
packages=gtk2-engines-pixbuf,python-pyqt5
[debian:9.1:pyqt5-dbus]
packages=python-dbus.mainloop.pyqt5

[debian:9.1:automake]
packages=automake1.11

[debian:9.1:epm]
packages=epm



# ****************************************

[debian:9.2]
code_name=Stretch
packaged_version=3.18.4
release_date=7/10/2017
same_as_version=9.1

# ****************************************

[debian:9.3]
code_name=Stretch
packaged_version=3.18.4
release_date=9/12/2017
same_as_version=9.1

# ****************************************

[debian:9.4]
code_name=Stretch
packaged_version=3.18.4
release_date=10/3/2018
#su -c "apt-get install --force-yes -y python-qt4",su -c "apt-get install --force-yes -y python-qt4-dbus",
#scanjet_depend_cmd=su -c "apt-get install --force-yes -y python2-pip",su -c "pip2 install --upgrade pip",su -c "apt-get install --force-yes -y libleptonica-dev",su -c "apt-get install --force-yes -y tesseract-ocr",su -c "apt-get install --force-yes -y libtesseract-dev",su -c "pip2 install tesserocr",su -c "apt-get install --force-yes -y tesseract-ocr-all",su -c "apt-get install --force-yes -y libzbar-dev",su -c "apt-get install --force-yes -y python-zbar",su -c "apt-get install --force-yes -y python-opencv",su -c "apt-get install --force-yes -y python-pypdf2",su -c "pip2 install imutils",su -c "pip2 install pypdfocr",su -c "pip2 install scikit-image",su -c "pip2 install scipy"
#su -c "apt-get install --force-yes -y python3-pyqt4",su -c "apt-get install --force-yes -y gtk2-engines-pixbuf",su -c "apt-get install --force-yes -y python3-dbus.mainloop.qt",
#scanjet_py3_depend_cmd=su -c "apt-get install --force-yes -y python3-pip",su -c "pip3 install --upgrade pip",su -c "apt-get install --force-yes -y libleptonica-dev",su -c "apt-get install --force-yes -y tesseract-ocr",su -c "apt-get install --force-yes -y libtesseract-dev",su -c "pip3 install tesserocr",su -c "apt-get install --force-yes -y tesseract-ocr-all",su -c "pip3 install opencv-python",su -c "pip3 install PyPDF2",su -c "pip3 install imutils",su -c "pip3 install ocrmypdf",su -c "pip3 install scikit-image",su -c "pip3 install scipy"
same_as_version=9.1

# ****************************************

[debian:9.5]
code_name=Stretch
packaged_version=3.18.4
release_date=10/3/2018
#su -c "apt-get install --force-yes -y python-qt4",su -c "apt-get install --force-yes -y python-qt4-dbus",
#scanjet_depend_cmd=su -c "apt-get install --force-yes -y python2-pip",su -c "pip2 install --upgrade pip",su -c "apt-get install --force-yes -y libleptonica-dev",su -c "apt-get install --force-yes -y tesseract-ocr",su -c "apt-get install --force-yes -y libtesseract-dev",su -c "pip2 install tesserocr",su -c "apt-get install --force-yes -y tesseract-ocr-all",su -c "apt-get install --force-yes -y libzbar-dev",su -c "apt-get install --force-yes -y python-zbar",su -c "apt-get install --force-yes -y python-opencv",su -c "apt-get install --force-yes -y python-pypdf2",su -c "pip2 install imutils",su -c "pip2 install pypdfocr",su -c "pip2 install scikit-image",su -c "pip2 install scipy"
#su -c "apt-get install --force-yes -y python3-pyqt4",su -c "apt-get install --force-yes -y gtk2-engines-pixbuf",su -c "apt-get install --force-yes -y python3-dbus.mainloop.qt",
#scanjet_py3_depend_cmd=su -c "apt-get install --force-yes -y python3-pip",su -c "pip3 install --upgrade pip",su -c "apt-get install --force-yes -y libleptonica-dev",su -c "apt-get install --force-yes -y tesseract-ocr",su -c "apt-get install --force-yes -y libtesseract-dev",su -c "pip3 install tesserocr",su -c "apt-get install --force-yes -y tesseract-ocr-all",su -c "pip3 install opencv-python",su -c "pip3 install PyPDF2",su -c "pip3 install imutils",su -c "pip3 install ocrmypdf",su -c "pip3 install scikit-image",su -c "pip3 install scipy"
same_as_version=9.1

# ****************************************

[debian:9.6]
code_name=Stretch
packaged_version=3.18.4
release_date=10/11/2018
#su -c "apt-get install --force-yes -y python-qt4",su -c "apt-get install --force-yes -y python-qt4-dbus",
#scanjet_depend_cmd=su -c "apt-get install --force-yes -y python2-pip",su -c "pip2 install --upgrade pip",su -c "apt-get install --force-yes -y libleptonica-dev",su -c "apt-get install --force-yes -y tesseract-ocr",su -c "apt-get install --force-yes -y libtesseract-dev",su -c "pip2 install tesserocr",su -c "apt-get install --force-yes -y tesseract-ocr-all",su -c "apt-get install --force-yes -y libzbar-dev",su -c "apt-get install --force-yes -y python-zbar",su -c "apt-get install --force-yes -y python-opencv",su -c "apt-get install --force-yes -y python-pypdf2",su -c "pip2 install imutils",su -c "pip2 install pypdfocr",su -c "pip2 install scikit-image",su -c "pip2 install scipy"
#su -c "apt-get install --force-yes -y python3-pyqt4",su -c "apt-get install --force-yes -y gtk2-engines-pixbuf",su -c "apt-get install --force-yes -y python3-dbus.mainloop.qt",
#scanjet_py3_depend_cmd=su -c "apt-get install --force-yes -y python3-pip",su -c "pip3 install --upgrade pip",su -c "apt-get install --force-yes -y libleptonica-dev",su -c "apt-get install --force-yes -y tesseract-ocr",su -c "apt-get install --force-yes -y libtesseract-dev",su -c "pip3 install tesserocr",su -c "apt-get install --force-yes -y tesseract-ocr-all",su -c "pip3 install opencv-python",su -c "pip3 install PyPDF2",su -c "pip3 install imutils",su -c "pip3 install ocrmypdf",su -c "pip3 install scikit-image",su -c "pip3 install scipy"
same_as_version=9.1

# ****************************************

[debian:9.7]
code_name=Stretch
packaged_version=3.19.3
release_date=23/1/2019
same_as_version=9.1

# ****************************************

[debian:9.8]
code_name=Stretch
packaged_version=3.19.5
release_date=16/2/2019
same_as_version=9.1

# ****************************************

[debian:9.9]
code_name=Stretch
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.19.8
release_date=22/07/2017
notes=NOTE: Disable the CD Sources in your apt sources.list or the install will fail and hang.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt5
native_cups=1
policykit=0
# This libdir_path will be used only for 64 bit machine.
libdir_path=/usr/lib/x86_64-linux-gnu
[debian:9.9:cups]
packages=cups,libcups2
[debian:9.9:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client,cups,libcups2
[debian:9.9:gcc]
packages=g++
[debian:9.9:gs]
packages=ghostscript,ghostscript-cups,ghostscript-x
[debian:9.9:libcrypto]
packages=libssl-dev
[debian:9.9:libjpeg]
packages=libjpeg62-turbo-dev
[debian:9.9:libnetsnmp-devel]
packages=libsnmp-dev,snmp
[debian:9.9:libpthread]
packages=libc6
[debian:9.9:libtool]
packages=libtool,libtool-bin
[debian:9.9:libusb]
packages=libusb-1.0.0-dev
[debian:9.9:make]
packages=make
[debian:9.9:pil]
packages=python-imaging
[debian:9.9:ppdev]
packages=
commands=su -c "modprobe ppdev",su -c cp -f /etc/modules /etc/modules.hplip,echo ppdev | su -c tee -a /etc/modules
[debian:9.9:pyqt]
packages=python-qt3
[debian:9.9:python-devel]
packages=python-dev
[debian:9.9:pyqt4]
packages=python-qt4
[debian:9.9:pyqt4-dbus]
packages=python-qt4-dbus
[debian:9.9:python23]
packages=python
[debian:9.9:python2X]
packages=python
[debian:9.9:reportlab]
packages=python-reportlab
[debian:9.9:sane]
packages=sane
[debian:9.9:sane-devel]
packages=libsane-dev
[debian:9.9:scanimage]
packages=sane-utils
[debian:9.9:xsane]
packages=xsane
[debian:9.9:cups-ddk]
packages=
[debian:9.9:python-dbus]
packages=python-dbus,python-gobject
[debian:9.9:dbus]
packages=libdbus-1-dev
[debian:9.9:python-ctypes]
packages=python-ctypes
[debian:9.9:cups-image]
packages=libcupsimage2,libcupsimage2-dev
[debian:9.9:policykit]
packages=policykit-1,policykit-1-gnome
[debian:9.9:python-notify]
packages=python-notify
[debian:9.9:network]
packages=wget
[debian:9.9:avahi-utils]
packages=avahi-utils
[debian:9.9:gtk]
packages=libcanberra-gtk-module
[debian:9.9:python3-notify2]
packages=python3-notify2
[debian:9.9:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt
[debian:9.9:python3-pyqt4]
packages=python3-pyqt4,gtk2-engines-pixbuf
[debian:9.9:python3-dbus]
packages=python3-dbus,python3-gi
[debian:9.9:python3-xml]
packages=python3-lxml
[debian:9.9:python3-devel]
packages=python3-dev
[debian:9.9:python3-pil]
packages=python3-pil
[debian:9.9:python3-reportlab]
packages=python3-reportlab
[debian:9.9:python3-pyqt5-dbus]
packages=python3-dbus.mainloop.pyqt5
[debian:9.9:python3-pyqt5]
packages=python3-pyqt5,gtk2-engines-pixbuf
[debian:9.9:pyqt5]
packages=gtk2-engines-pixbuf,python-pyqt5
[debian:9.9:pyqt5-dbus]
packages=python-dbus.mainloop.pyqt5
[debian:9.9:automake]
packages=automake1.11
[debian:9.9:epm]
packages=epm

# ****************************************
[debian:10.0]
code_name=Buster
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.19.8
release_date=22/07/2017
notes=NOTE: Disable the CD Sources in your apt sources.list or the install will fail and hang.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt5
native_cups=1
policykit=0
# This libdir_path will be used only for 64 bit machine.
libdir_path=/usr/lib/x86_64-linux-gnu
[debian:10.0:cups]
packages=cups,libcups2
[debian:10.0:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client
[debian:10.0:gcc]
packages=g++
[debian:10.0:gs]
packages=ghostscript,ghostscript-cups,ghostscript-x
[debian:10.0:libcrypto]
packages=libssl-dev
[debian:10.0:libjpeg]
packages=libjpeg62-turbo-dev
[debian:10.0:libnetsnmp-devel]
packages=libsnmp-dev,snmp
[debian:10.0:libpthread]
packages=libc6
[debian:10.0:libtool]
packages=libtool,libtool-bin
[debian:10.0:libusb]
packages=libusb-1.0.0-dev
[debian:10.0:make]
packages=make
[debian:10.0:ppdev]
packages=
commands=su -c "modprobe ppdev",su -c cp -f /etc/modules /etc/modules.hplip,echo ppdev | su -c tee -a /etc/modules
[debian:10.0:pyqt]
packages=python-qt3
[debian:10.0:python-devel]
packages=python-dev
[debian:10.0:pyqt4]
packages=python-qt4
[debian:10.0:pyqt4-dbus]
packages=python-qt4-dbus
[debian:10.0:python23]
packages=python
[debian:10.0:python2X]
packages=python
[debian:10.0:reportlab]
packages=python-reportlab
[debian:10.0:sane]
packages=sane
[debian:10.0:sane-devel]
packages=libsane-dev
[debian:10.0:scanimage]
packages=sane-utils
[debian:10.0:xsane]
packages=xsane
[debian:10.0:cups-ddk]
packages=
[debian:10.0:python-dbus]
packages=python-dbus,python-gobject
[debian:10.0:dbus]
packages=libdbus-1-dev
[debian:10.0:python-ctypes]
packages=python-ctypes
[debian:10.0:cups-image]
packages=libcupsimage2,libcupsimage2-dev
[debian:10.0:policykit]
packages=policykit-1,policykit-1-gnome
[debian:10.0:python-notify]
packages=python-notify
[debian:10.0:network]
packages=wget
[debian:10.0:avahi-utils]
packages=avahi-utils
[debian:10.0:gtk]
packages=libcanberra-gtk-module
[debian:10.0:python3-notify2]
packages=python3-notify2
[debian:10.0:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt
[debian:10.0:python3-pyqt4]
packages=python3-pyqt4,gtk2-engines-pixbuf
[debian:10.0:python3-dbus]
packages=python3-dbus,python3-gi
[debian:10.0:python3-xml]
packages=python3-lxml
[debian:10.0:python3-devel]
packages=python3-dev
[debian:10.0:python3-pil]
packages=python3-pil
[debian:10.0:python3-reportlab]
packages=python3-reportlab
[debian:10.0:python3-pyqt5-dbus]
packages=python3-dbus.mainloop.pyqt5
[debian:10.0:python3-pyqt5]
packages=python3-pyqt5,gtk2-engines-pixbuf
[debian:10.0:pyqt5]
packages=gtk2-engines-pixbuf,python-pyqt5
[debian:10.0:pyqt5-dbus]
packages=python-dbus.mainloop.pyqt5

[debian:10.0:automake]
packages=automake1.11

[debian:10.0:epm]
packages=epm


# ****************************************
[debian:10.1]
code_name=Buster
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.19.8
release_date=22/07/2017
notes=NOTE: Disable the CD Sources in your apt sources.list or the install will fail and hang.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt5
native_cups=1
policykit=0
# This libdir_path will be used only for 64 bit machine.
libdir_path=/usr/lib/x86_64-linux-gnu
[debian:10.1:cups]
packages=cups,libcups2
[debian:10.1:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client
[debian:10.1:gcc]
packages=g++
[debian:10.1:gs]
packages=ghostscript,ghostscript-cups,ghostscript-x
[debian:10.1:libcrypto]
packages=libssl-dev
[debian:10.1:libjpeg]
packages=libjpeg62-turbo-dev
[debian:10.1:libnetsnmp-devel]
packages=libsnmp-dev,snmp
[debian:10.1:libpthread]
packages=libc6
[debian:10.1:libtool]
packages=libtool,libtool-bin
[debian:10.1:libusb]
packages=libusb-1.0.0-dev
[debian:10.1:make]
packages=make
[debian:10.1:ppdev]
packages=
commands=su -c "modprobe ppdev",su -c cp -f /etc/modules /etc/modules.hplip,echo ppdev | su -c tee -a /etc/modules
[debian:10.1:pyqt]
packages=python-qt3
[debian:10.1:python-devel]
packages=python-dev
[debian:10.1:pyqt4]
packages=python-qt4
[debian:10.1:pyqt4-dbus]
packages=python-qt4-dbus
[debian:10.1:python23]
packages=python
[debian:10.1:python2X]
packages=python
[debian:10.1:reportlab]
packages=python-reportlab
[debian:10.1:sane]
packages=sane
[debian:10.1:sane-devel]
packages=libsane-dev
[debian:10.1:scanimage]
packages=sane-utils
[debian:10.1:xsane]
packages=xsane
[debian:10.1:cups-ddk]
packages=
[debian:10.1:python-dbus]
packages=python-dbus,python-gobject
[debian:10.1:dbus]
packages=libdbus-1-dev
[debian:10.1:python-ctypes]
packages=python-ctypes
[debian:10.1:cups-image]
packages=libcupsimage2,libcupsimage2-dev
[debian:10.1:policykit]
packages=policykit-1,policykit-1-gnome
[debian:10.1:python-notify]
packages=python-notify
[debian:10.1:network]
packages=wget
[debian:10.1:avahi-utils]
packages=avahi-utils
[debian:10.1:gtk]
packages=libcanberra-gtk-module
[debian:10.1:python3-notify2]
packages=python3-notify2
[debian:10.1:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt
[debian:10.1:python3-pyqt4]
packages=python3-pyqt4,gtk2-engines-pixbuf
[debian:10.1:python3-dbus]
packages=python3-dbus,python3-gi
[debian:10.1:python3-xml]
packages=python3-lxml
[debian:10.1:python3-devel]
packages=python3-dev
[debian:10.1:python3-pil]
packages=python3-pil
[debian:10.1:python3-reportlab]
packages=python3-reportlab
[debian:10.1:python3-pyqt5-dbus]
packages=python3-dbus.mainloop.pyqt5
[debian:10.1:python3-pyqt5]
packages=python3-pyqt5,gtk2-engines-pixbuf
[debian:10.1:pyqt5]
packages=gtk2-engines-pixbuf,python-pyqt5
[debian:10.1:pyqt5-dbus]
packages=python-dbus.mainloop.pyqt5

[debian:10.1:automake]
packages=automake1.11

[debian:10.1:epm]
packages=epm

# ****************************************
[debian:10.2]
code_name=Buster
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.19.12
release_date=22/07/2017
notes=NOTE: Disable the CD Sources in your apt sources.list or the install will fail and hang.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt5
native_cups=1
policykit=0
# This libdir_path will be used only for 64 bit machine.
libdir_path=/usr/lib/x86_64-linux-gnu
[debian:10.2:cups]
packages=cups,libcups2
[debian:10.2:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client
[debian:10.2:gcc]
packages=g++
[debian:10.2:gs]
packages=ghostscript,ghostscript-cups,ghostscript-x
[debian:10.2:libcrypto]
packages=libssl-dev
[debian:10.2:libjpeg]
packages=libjpeg62-turbo-dev
[debian:10.2:libnetsnmp-devel]
packages=libsnmp-dev,snmp
[debian:10.2:libpthread]
packages=libc6
[debian:10.2:libtool]
packages=libtool,libtool-bin
[debian:10.2:libusb]
packages=libusb-1.0.0-dev
[debian:10.2:make]
packages=make
[debian:10.2:ppdev]
packages=
commands=su -c "modprobe ppdev",su -c cp -f /etc/modules /etc/modules.hplip,echo ppdev | su -c tee -a /etc/modules
[debian:10.2:pyqt]
packages=python-qt3
[debian:10.2:python-devel]
packages=python-dev
[debian:10.2:pyqt4]
packages=python-qt4
[debian:10.2:pyqt4-dbus]
packages=python-qt4-dbus
[debian:10.2:python23]
packages=python
[debian:10.2:python2X]
packages=python
[debian:10.2:reportlab]
packages=python-reportlab
[debian:10.2:sane]
packages=sane
[debian:10.2:sane-devel]
packages=libsane-dev
[debian:10.2:scanimage]
packages=sane-utils
[debian:10.2:xsane]
packages=xsane
[debian:10.2:cups-ddk]
packages=
[debian:10.2:python-dbus]
packages=python-dbus,python-gobject
[debian:10.2:dbus]
packages=libdbus-1-dev
[debian:10.2:python-ctypes]
packages=python-ctypes
[debian:10.2:cups-image]
packages=libcupsimage2,libcupsimage2-dev
[debian:10.2:policykit]
packages=policykit-1,policykit-1-gnome
[debian:10.2:python-notify]
packages=python-notify
[debian:10.2:network]
packages=wget
[debian:10.2:avahi-utils]
packages=avahi-utils
[debian:10.2:gtk]
packages=libcanberra-gtk-module
[debian:10.2:python3-notify2]
packages=python3-notify2
[debian:10.2:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt
[debian:10.2:python3-pyqt4]
packages=python3-pyqt4,gtk2-engines-pixbuf
[debian:10.2:python3-dbus]
packages=python3-dbus,python3-gi
[debian:10.2:python3-xml]
packages=python3-lxml
[debian:10.2:python3-devel]
packages=python3-dev
[debian:10.2:python3-pil]
packages=python3-pil
[debian:10.2:python3-reportlab]
packages=python3-reportlab
[debian:10.2:python3-pyqt5-dbus]
packages=python3-dbus.mainloop.pyqt5
[debian:10.2:python3-pyqt5]
packages=python3-pyqt5,gtk2-engines-pixbuf
[debian:10.2:pyqt5]
packages=gtk2-engines-pixbuf,python-pyqt5
[debian:10.2:pyqt5-dbus]
packages=python-dbus.mainloop.pyqt5
[debian:10.2:automake]
packages=automake1.11
[debian:10.2:epm]
packages=epm

# ****************************************
[xandros]
index=13
versions=any
display_name=Xandros
alt_names=
display=0
notes=
package_mgrs=
package_mgr_cmd=
pre_depend_cmd=
post_depend_cmd=
hplip_remove_cmd=
su_sudo=su
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP

# ********************
[xandros:any]
code_name=
supported=0
scan_supported=1
fax_supported=0
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=
release_date=
notes=
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt3

# ****************************************
[pcbsd]
index=19
versions=any
display_name=PC-BSD
alt_names=
display=0
notes=
package_mgrs=
package_mgr_cmd=
pre_depend_cmd=
post_depend_cmd=
hplip_remove_cmd=
su_sudo=su
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP

# ********************
[pcbsd:any]
code_name=
supported=0
scan_supported=1
fax_supported=0
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=
release_date=
notes=
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt3

# ****************************************
[miracle]
index=21
versions=any
display_name=Miracle Linux
alt_names=
display=0
notes=
package_mgrs=
package_mgr_cmd=
pre_depend_cmd=
post_depend_cmd=
hplip_remove_cmd=
su_sudo=su
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP

# ********************
[miracle:any]
code_name=
supported=0
scan_supported=1
fax_supported=0
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=
release_date=
notes=
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt3

# ****************************************
[asianux]
index=18
versions=any
display_name=AsianUX
alt_names=
display=0
notes=
package_mgrs=
package_mgr_cmd=
pre_depend_cmd=
post_depend_cmd=
hplip_remove_cmd=
su_sudo=su
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP

# ********************
[asianux:any]
code_name=
supported=0
scan_supported=1
fax_supported=0
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=
release_date=
notes=
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt3

# ****************************************
[freebsd]
index=14
versions=any
display_name=FreeBSD
alt_names=
display=0
notes=
package_mgrs=
package_mgr_cmd=
pre_depend_cmd=
post_depend_cmd=
hplip_remove_cmd=
su_sudo=su
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP

# ********************
[freebsd:any]
code_name=
supported=0
scan_supported=1
fax_supported=0
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=
release_date=
notes=
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt3

# ****************************************
[mepis]
index=1
versions=6.0,6.5,7.0,8.0
display_name=Mepis
alt_names=
display=1
notes=
package_mgrs=dpkg,apt-get,synaptic,update-manager,adept,aptitude
package_mgr_cmd=su -c "apt-get install --yes $packages_to_install"
pre_depend_cmd=su -c "dpkg --configure -a",su -c "apt-get update"
post_depend_cmd=
hplip_remove_cmd=su -c "apt-get remove --yes hplip hpijs"
su_sudo=su
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP

# ********************
[mepis:6.0]
code_name=
supported=0
scan_supported=1
fax_supported=0
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=0.9.7
release_date=2006-07-22
notes=Before proceeding please enable the universe/multiverse repositories in Synaptic or Apt.
udev_mode_fix=1
fix_ppd_symlink=0
ppd_install=ppd
ppd_dir=/usr/share/ppd/HP
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4

[mepis:6.0:cups]
packages=libcupsys2

[mepis:6.0:cups-devel]
packages=libcupsys2-dev

[mepis:6.0:gcc]
packages=build-essential

[mepis:6.0:gs]
packages=gs-esp

[mepis:6.0:libcrypto]
packages=openssl

[mepis:6.0:libjpeg]
packages=libjpeg62-dev

[mepis:6.0:libnetsnmp-devel]
packages=libsnmp9-dev

[mepis:6.0:libpthread]
packages=build-essential

[mepis:6.0:libtool]
packages=libtool

[mepis:6.0:libusb]
packages=libusb-1.0-0-dev

[mepis:6.0:make]
packages=build-essential

[mepis:6.0:pil]
packages=python-imaging

[mepis:6.0:ppdev]
packages=
commands=su -c "modprobe ppdev",su -c cp -f /etc/modules /etc/modules.hplip,echo ppdev | su -c tee -a /etc/modules

[mepis:6.0:pyqt]
packages=python-qt3

[mepis:6.0:python-devel]
packages=python-dev

[mepis:6.0:pyqt4]
packages=python-qt4

[mepis:6.0:pyqt4-dbus]
packages=python-qt4-dbus

[mepis:6.0:python23]
packages=python

[mepis:6.0:python2X]
packages=python

[mepis:6.0:reportlab]
packages=python-reportlab

[mepis:6.0:sane]
packages=sane,libsane-dev

[mepis:6.0:sane-devel]
packages=libsane-dev

[mepis:6.0:scanimage]
packages=sane-utils

[mepis:6.0:xsane]
packages=xsane

[mepis:6.0:cups-ddk]
packages=

[mepis:6.0:python-dbus]
# packages=python2.4-dbus,libdbus-1-dev,python-gobject

[mepis:6.0:python-ctypes]
# packages=python-ctypes

[mepis:6.0:cups-image]
packages=libcupsys2-dev

[mepis:6.0:network]
packages=wget

[mepis:6.0:avahi-utils]
packages=avahi-utils

[mepis:6.0:automake]
packages=automake1.11

[mepis:6.0:epm]
packages=epm

# ********************
[mepis:6.5]
code_name=
supported=0
scan_supported=1
fax_supported=0
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=1.7.3
release_date=2006-4-4
notes=Before proceeding please enable the universe/multiverse repositories in Synaptic or Apt.
udev_mode_fix=1
fix_ppd_symlink=0
ppd_install=ppd
ppd_dir=/usr/share/ppd/HP
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4

[mepis:6.5:cups]
packages=libcupsys2

[mepis:6.5:cups-devel]
packages=libcupsys2-dev

[mepis:6.5:gcc]
packages=build-essential

[mepis:6.5:gs]
packages=gs-esp

[mepis:6.5:libcrypto]
packages=openssl

[mepis:6.5:libjpeg]
packages=libjpeg62-dev

[mepis:6.5:libnetsnmp-devel]
packages=libsnmp9-dev

[mepis:6.5:libpthread]
packages=build-essential

[mepis:6.5:libtool]
packages=libtool

[mepis:6.5:libusb]
packages=libusb-1.0-0-dev

[mepis:6.5:make]
packages=build-essential

[mepis:6.5:pil]
packages=python-imaging

[mepis:6.5:ppdev]
packages=
commands=su -c "modprobe ppdev",su -c cp -f /etc/modules /etc/modules.hplip,echo ppdev | su -c tee -a /etc/modules

[mepis:6.5:pyqt]
packages=python-qt3

[mepis:6.5:python-devel]
packages=python-dev

[mepis:6.5:pyqt4]
packages=python-qt4

[mepis:6.5:pyqt4-dbus]
packages=python-qt4-dbus

[mepis:6.5:python23]
packages=python

[mepis:6.5:python2X]
packages=python

[mepis:6.5:reportlab]
packages=python-reportlab

[mepis:6.5:sane]
packages=sane,libsane-dev

[mepis:6.5:sane-devel]
packages=libsane-dev

[mepis:6.5:scanimage]
packages=sane-utils

[mepis:6.5:xsane]
packages=xsane

[mepis:6.5:cups-ddk]
packages=

[mepis:6.5:python-dbus]
# packages=python2.4-dbus,libdbus-1-dev,python-gobject

[mepis:6.5:python-ctypes]
# packages=python-ctypes

[mepis:6.5:cups-image]
packages=libcupsys2-dev

[mepis:6.5:network]
packages=wget

[mepis:6.5:avahi-utils]
packages=avahi-utils

[mepis:6.5:automake]
packages=automake1.11

[mepis:6.5:epm]
packages=epm

# ********************
# ********************
[mepis:7.0]
code_name=
supported=0
scan_supported=1
fax_supported=0
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=2.7.10
release_date=
notes=Before proceeding please enable the universe/multiverse repositories in Synaptic or Apt.
udev_mode_fix=1
fix_ppd_symlink=0
ppd_install=ppd
ppd_dir=/usr/share/ppd/HP
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4

[mepis:7.0:cups]
packages=libcupsys2

[mepis:7.0:cups-devel]
packages=libcupsys2-dev

[mepis:7.0:gcc]
packages=build-essential

[mepis:7.0:gs]
packages=gs-esp

[mepis:7.0:libcrypto]
packages=openssl

[mepis:7.0:libjpeg]
packages=libjpeg62-dev

[mepis:7.0:libnetsnmp-devel]
packages=libsnmp9-dev

[mepis:7.0:libpthread]
packages=build-essential

[mepis:7.0:libtool]
packages=libtool

[mepis:7.0:libusb]
packages=libusb-1.0-0-dev

[mepis:7.0:make]
packages=build-essential

[mepis:7.0:pil]
packages=python-imaging

[mepis:7.0:ppdev]
packages=
commands=su -c "modprobe ppdev",su -c cp -f /etc/modules /etc/modules.hplip,echo ppdev | su -c tee -a /etc/modules

[mepis:7.0:pyqt]
packages=python-qt3

[mepis:7.0:python-devel]
packages=python-dev

[mepis:7.0:pyqt4]
packages=python-qt4

[mepis:7.0:pyqt4-dbus]
packages=python-qt4-dbus

[mepis:7.0:python23]
packages=python

[mepis:7.0:python2X]
packages=python

[mepis:7.0:reportlab]
packages=python-reportlab

[mepis:7.0:sane]
packages=sane,libsane-dev

[mepis:7.0:sane-devel]
packages=libsane-dev

[mepis:7.0:scanimage]
packages=sane-utils

[mepis:7.0:xsane]
packages=xsane

[mepis:7.0:cups-ddk]
packages=

[mepis:7.0:python-dbus]
packages=python-dbus,libdbus-1-dev,python-gobject

[mepis:7.0:python-ctypes]
packages=python-ctypes

[mepis:7.0:cups-image]
packages=libcupsys2-dev

[mepis:7.0:network]
packages=wget

[mepis:7.0:avahi-utils]
packages=avahi-utils

[mepis:7.0:automake]
packages=automake1.11

[mepis:7.0:epm]
packages=epm

# ********************
# ********************
[mepis:8.0]
code_name=
supported=0
scan_supported=1
fax_supported=0
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=
release_date=
notes=Before proceeding please enable the universe/multiverse repositories in Synaptic or Apt.
udev_mode_fix=1
fix_ppd_symlink=0
ppd_install=ppd
ppd_dir=/usr/share/ppd/HP
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4

[mepis:8.0:cups]
packages=libcupsys2

[mepis:8.0:cups-devel]
packages=libcupsys2-dev

[mepis:8.0:gcc]
packages=build-essential

[mepis:8.0:gs]
packages=gs-esp

[mepis:8.0:libcrypto]
packages=openssl

[mepis:8.0:libjpeg]
packages=libjpeg62-dev

[mepis:8.0:libnetsnmp-devel]
packages=libsnmp9-dev

[mepis:8.0:libpthread]
packages=build-essential

[mepis:8.0:libtool]
packages=libtool

[mepis:8.0:libusb]
packages=libusb-1.0-0-dev

[mepis:8.0:make]
packages=build-essential

[mepis:8.0:pil]
packages=python-imaging

[mepis:8.0:ppdev]
packages=
commands=su -c "modprobe ppdev",su -c cp -f /etc/modules /etc/modules.hplip,echo ppdev | su -c tee -a /etc/modules

[mepis:8.0:pyqt]
packages=python-qt3

[mepis:8.0:python-devel]
packages=python-dev

[mepis:8.0:pyqt4]
packages=python-qt4

[mepis:8.0:pyqt4-dbus]
packages=python-qt4-dbus

[mepis:8.0:python23]
packages=python

[mepis:8.0:python2X]
packages=python

[mepis:8.0:reportlab]
packages=python-reportlab

[mepis:8.0:sane]
packages=sane,libsane-dev

[mepis:8.0:sane-devel]
packages=libsane-dev

[mepis:8.0:scanimage]
packages=sane-utils

[mepis:8.0:xsane]
packages=xsane

[mepis:8.0:cups-ddk]
packages=

[mepis:8.0:python-dbus]
packages=python-dbus,libdbus-1-dev,python-gobject

[mepis:8.0:python-ctypes]
packages=python-ctypes

[mepis:8.0:cups-image]
packages=libcupsys2-dev

[mepis:8.0:network]
packages=wget

[mepis:8.0:avahi-utils]
packages=avahi-utils

[mepis:8.0:automake]
packages=automake1.11

[mepis:8.0:epm]
packages=epm

# ********************
# ****************************************
[mandriva]
index=4
versions=2010.0,2011.0
display_name=Mandriva Linux
alt_names=Mandrakelinux,Mandrake Linux
display=1
notes=
package_mgrs=urpmi
package_mgr_cmd=su - -c "urpmi --allow-force --force --auto $packages_to_install"
pre_install_cmd=su - -c "/etc/init.d/cups restart",su - -c "touch /etc/security/console.perms.d/60-hplip.perms && echo '<usb>=/dev/usb/dabusb* /dev/usb/mdc800* /dev/usb/rio500 /dev/ttyUSB*' | tee /etc/security/console.perms.d/60-hplip.perms"
pre_depend_cmd=su - -c "rm /etc/hp/hplip.conf"
post_depend_cmd=su - -c "/etc/init.d/cups restart", su - -c "chmod 700 /usr/lib/cups/backend/hp"
hplip_remove_cmd=su - -c "urpme hplip task-printing-hp"
su_sudo=su
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP

# ********************
[mandriva:9.1]
code_name=Bamboo
supported=0
scan_supported=1
fax_supported=0
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=
release_date=2003-3-25
notes=Before proceeding, please add the "contrib", "main", and "updates" installation sources to your URPMI configuration.  Open your browser and go to http://easyurpmi.zarb.org/ and follow the instructions provided and then proceed with the HPLIP install. Also you may wish to turn off the cdrom1-12 media sources to speed up the process.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt3

# ********************
[mandriva:9.2]
code_name=Fivestar
supported=0
scan_supported=1
fax_supported=0
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=
release_date=2003-10-14
notes=Before proceeding, please add the "contrib", "main", and "updates" installation sources to your URPMI configuration.  Open your browser and go to http://easyurpmi.zarb.org/ and follow the instructions provided and then proceed with the HPLIP install. Also you may wish to turn off the cdrom1-12 media sources to speed up the process.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt3

# ********************
[mandriva:10.0]
code_name=Community and official
supported=0
scan_supported=1
fax_supported=0
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=0.9.1
release_date=2004-3-4
notes=Before proceeding, please add the "contrib", "main", and "updates" installation sources to your URPMI configuration./n Open your browser and go to http://easyurpmi.zarb.org/ and follow the instructions provided and then proceed with the HPLIP install. Also you may wish to turn off the cdrom1-12 media sources to speed up the process.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt3

# ********************
[mandriva:10.1]
code_name=Official
supported=0
scan_supported=1
fax_supported=0
pcard_supported=1
network_supported=0
parallel_supported=1
usb_supported=1
packaged_version=0.9.1
release_date=2004-9-16
notes=Before proceeding, please add the "contrib", "main", and "updates" installation sources to your URPMI configuration./n Open your browser and go to http://easyurpmi.zarb.org/ and follow the instructions provided and then proceed with the HPLIP install. Also be sure to disable the cdrom1-12 media sources. 
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4

[mandriva:10.1:cups]
packages=cups

[mandriva:10.1:cups-devel]
packages=cups-devel

[mandriva:10.1:gcc]
packages=gcc-c++

[mandriva:10.1:gs]
packages=ghostscript

[mandriva:10.1:libcrypto]
packages=libcryptopp5,libcryptopp5-devel

[mandriva:10.1:libjpeg]
packages=libjpeg62-dev

[mandriva:10.1:libnetsnmp-devel]
packages=libsnmp0-devel

[mandriva:10.1:libpthread]
packages=glibc

[mandriva:10.1:libtool]
packages=libtool

[mandriva:10.1:libusb]
packages=libusb0.1_4-devel

[mandriva:10.1:make]
packages=make

[mandriva:10.1:pil]
packages=python-imaging

[mandriva:10.1:ppdev]
packages=
commands=su -c "modprobe ppdev"

[mandriva:10.1:pyqt]
packages=PyQt

[mandriva:10.1:python-devel]
packages=python-devel

[mandriva:10.1:pyqt4]
packages=python-qt4

[mandriva:10.1:pyqt4-dbus]
packages=dbus-python

[mandriva:10.1:python23]
packages=python

[mandriva:10.1:python2X]
packages=python

[mandriva:10.1:reportlab]
packages=python-reportlab

[mandriva:10.1:sane]
packages=sane

[mandriva:10.1:sane-devel]
packages=libsane1-devel

[mandriva:10.1:scanimage]
packages=libsane1

[mandriva:10.1:xsane]
packages=xsane

[mandriva:10.1:cups-ddk]
# packages=cupsddk,cupsddk-drivers

[mandriva:10.1:python-dbus]
# packages=dbus-python,libdbus-1_0-devel,python-gobject

[mandriva:10.1:python-ctypes]
# packages=python-ctypes

[mandriva:10.1:cups-image]
packages=cups-devel

[mandriva:10.1:network]
packages=wget

[mandriva:10.1:avahi-utils]
packages=avahi

[mandriva:10.1:automake]
packages=automake1.11

[mandriva:10.1:epm]
packages=epm

# ********************
# ********************
[mandriva:10.2]
code_name=Limited edition 2005
supported=0
scan_supported=1
fax_supported=0
pcard_supported=1
network_supported=0
parallel_supported=1
usb_supported=1
packaged_version=0.9.1
release_date=2005-4-14
notes=Before proceeding, please add the "contrib", "main", and "updates" installation sources to your URPMI configuration./n Open your browser and go to http://easyurpmi.zarb.org/ and follow the instructions provided and then proceed with the HPLIP install. Also be sure to disable the cdrom1-12 media sources.
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4

[mandriva:10.2:cups]
packages=cups

[mandriva:10.2:cups-devel]
packages=cups-devel

[mandriva:10.2:gcc]
packages=gcc-c++

[mandriva:10.2:gs]
packages=ghostscript

[mandriva:10.2:libcrypto]
packages=libcryptopp5,libcryptopp5-devel

[mandriva:10.2:libjpeg]
packages=libjpeg62-dev

[mandriva:10.2:libnetsnmp-devel]
packages=libsnmp0-devel

[mandriva:10.2:libpthread]
packages=glibc

[mandriva:10.2:libtool]
packages=libtool

[mandriva:10.2:libusb]
packages=libusb0.1_4-devel

[mandriva:10.2:make]
packages=make

[mandriva:10.2:pil]
packages=python-imaging

[mandriva:10.2:ppdev]
packages=
commands=su -c "modprobe ppdev"

[mandriva:10.2:pyqt]
packages=PyQt

[mandriva:10.2:python-devel]
packages=python-devel

[mandriva:10.2:pyqt4]
packages=python-qt4

[mandriva:10.2:pyqt4-dbus]
packages=dbus-python

[mandriva:10.2:python23]
packages=python

[mandriva:10.2:python2X]
packages=python

[mandriva:10.2:reportlab]
packages=python-reportlab

[mandriva:10.2:sane]
packages=sane

[mandriva:10.2:sane-devel]
packages=libsane1-devel

[mandriva:10.2:scanimage]
packages=libsane1

[mandriva:10.2:xsane]
packages=xsane

[mandriva:10.2:cups-ddk]
# packages=cupsddk,cupsddk-drivers

[mandriva:10.2:python-dbus]
# packages=dbus-python,libdbus-1_0-devel,python-gobject

[mandriva:10.2:python-ctypes]
# packages=python-ctypes

[mandriva:10.2:cups-image]
packages=cups-devel

[mandriva:10.2:network]
packages=wget

[mandriva:10.2:avahi-utils]
packages=avahi

[mandriva:10.2:automake]
packages=automake1.11

[mandriva:10.2:epm]
packages=epm

# ********************
[mandriva:2006.0]
code_name=2k6
supported=0
scan_supported=1
fax_supported=0
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=0.9.8
release_date=2005-4-14
notes=Before proceeding, please add the "contrib", "main", and "updates" installation sources to your URPMI configuration./n Open your browser and go to http://easyurpmi.zarb.org/ and follow the instructions provided and then proceed with the HPLIP install. Also you may wish to turn off the cdrom1-12 media sources to speed up the process.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4

[mandriva:2006.0:cups]
packages=cups

[mandriva:2006.0:cups-devel]
packages=cups-devel

[mandriva:2006.0:gcc]
packages=gcc-c++

[mandriva:2006.0:gs]
packages=ghostscript

[mandriva:2006.0:libcrypto]
packages=libcryptopp5,libcryptopp5-devel

[mandriva:2006.0:libjpeg]
packages=libjpeg62-dev

[mandriva:2006.0:libnetsnmp-devel]
packages=libsnmp0-devel

[mandriva:2006.0:libpthread]
packages=glibc-i18ndata-2.3.5-5mdk.i586,glibc_lsb-2.3.4-2mdk.i586

[mandriva:2006.0:libtool]
packages=libtool

[mandriva:2006.0:libusb]
packages=libusb0.1_4-devel

[mandriva:2006.0:make]
packages=make

[mandriva:2006.0:pil]
packages=python-imaging

[mandriva:2006.0:ppdev]
packages=
commands=su -c "modprobe ppdev"

[mandriva:2006.0:pyqt]
packages=PyQt

[mandriva:2006.0:python-devel]
packages=python-devel

[mandriva:2006.0:pyqt4]
packages=python-qt4

[mandriva:2006.0:pyqt4-dbus]
packages=dbus-python

[mandriva:2006.0:python23]
packages=python

[mandriva:2006.0:python2X]
packages=python

[mandriva:2006.0:reportlab]
packages=python-reportlab

[mandriva:2006.0:sane]
packages=sane

[mandriva:2006.0:sane-devel]
packages=libsane1-devel

[mandriva:2006.0:scanimage]
packages=sane-utils

[mandriva:2006.0:xsane]
packages=xsane

[mandriva:2006.0:cups-ddk]
packages=cupsddk,cupsddk-drivers

[mandriva:2006.0:python-dbus]
# packages=dbus-python,libdbus-1_0-devel,python-gobject

[mandriva:2006.0:python-ctypes]
# packages=python-ctypes

[mandriva:2006.0:cups-image]
packages=cups-devel

[mandriva:2006.0:network]
packages=wget

[mandriva:2006.0:avahi-utils]
packages=avahi

[mandriva:2006.0:automake]
packages=automake1.11

[mandriva:2006.0:epm]
packages=epm

# ********************
[mandriva:2007.0]
code_name=2k7
supported=0
scan_supported=1
fax_supported=0
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=2.7.7
release_date=2006-10-3
notes=Before proceeding, please add the "contrib", "main", and "updates" installation sources to your URPMI configuration./n Open your browser and go to http://easyurpmi.zarb.org/ and follow the instructions provided and then proceed with the HPLIP install. Also you may wish to turn off the cdrom1-12 media sources to speed up the process.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4

[mandriva:2007.0:cups]
packages=cups

[mandriva:2007.0:cups-devel]
packages=libcups2-devel

[mandriva:2007.0:gcc]
packages=gcc-c++

[mandriva:2007.0:gs]
packages=ghostscript

[mandriva:2007.0:libcrypto]
packages=libcryptopp5,libcryptopp5-devel

[mandriva:2007.0:libjpeg]
packages=libjpeg62-dev

[mandriva:2007.0:libnetsnmp-devel]
packages=libsnmp0-devel

[mandriva:2007.0:libpthread]
packages=glibc

[mandriva:2007.0:libtool]
packages=libtool

[mandriva:2007.0:libusb]
packages=libusb0.1_4-devel

[mandriva:2007.0:make]
packages=make

[mandriva:2007.0:pil]
packages=python-imaging

[mandriva:2007.0:ppdev]
packages=
commands=su -c "modprobe ppdev"

[mandriva:2007.0:pyqt]
packages=PyQt

[mandriva:2007.0:python-devel]
packages=libpython2.4-devel

[mandriva:2007.0:pyqt4]
packages=python-qt4

[mandriva:2007.0:pyqt4-dbus]
packages=dbus-python

[mandriva:2007.0:python23]
packages=python

[mandriva:2007.0:python2X]
packages=python

[mandriva:2007.0:reportlab]
packages=python-reportlab

[mandriva:2007.0:sane]
packages=sane

[mandriva:2007.0:sane-devel]
packages=libsane1-devel

[mandriva:2007.0:scanimage]
packages=sane-utils

[mandriva:2007.0:xsane]
packages=xsane

[mandriva:2007.0:cups-ddk]
packages=cupsddk,cupsddk-drivers

[mandriva:2007.0:python-dbus]
# packages=dbus-python,libdbus-1_3-devel,python-gobject

[mandriva:2007.0:python-ctypes]
# packages=python-ctypes

[mandriva:2007.0:cups-image]
packages=cups-devel

[mandriva:2007.0:network]
packages=wget

[mandriva:2007.0:avahi-utils]
packages=avahi

[mandriva:2007.0:automake]
packages=automake1.11

[mandriva:2007.0:epm]
packages=epm

# ********************
[mandriva:2007.1]
code_name=2k7
supported=0
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=2.7.7
release_date=2007-4-17
notes=Before proceeding, please add the "contrib", "main", and "updates" installation sources to your URPMI configuration./n Open your browser and go to http://easyurpmi.zarb.org/ and follow the instructions provided and then proceed with the HPLIP install. Also you may wish to turn off the cdrom1-12 media sources to speed up the process.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4

[mandriva:2007.1:cups]
packages=cups

[mandriva:2007.1:cups-devel]
packages=cups-devel

[mandriva:2007.1:gcc]
packages=gcc-c++

[mandriva:2007.1:gs]
packages=ghostscript

[mandriva:2007.1:libcrypto]
packages=libcryptopp5,libcryptopp5-devel

[mandriva:2007.1:libjpeg]
packages=libjpeg62-dev

[mandriva:2007.1:libnetsnmp-devel]
packages=libsnmp0-devel

[mandriva:2007.1:libpthread]
packages=glibc-i18ndata-2.4-4mdk,glibc_lsb-2.3.6-1mdk

[mandriva:2007.1:libtool]
packages=libtool

[mandriva:2007.1:libusb]
packages=libusb0.1_4-devel

[mandriva:2007.1:make]
packages=make

[mandriva:2007.1:pil]
packages=python-imaging

[mandriva:2007.1:ppdev]
packages=
commands=su -c "modprobe ppdev"

[mandriva:2007.1:pyqt]
packages=PyQt

[mandriva:2007.1:python-devel]
packages=python-devel

[mandriva:2007.1:pyqt4]
packages=python-qt4

[mandriva:2007.1:pyqt4-dbus]
packages=dbus-python

[mandriva:2007.1:python23]
packages=python

[mandriva:2007.1:python2X]
packages=python

[mandriva:2007.1:reportlab]
packages=python-reportlab

[mandriva:2007.1:sane]
packages=sane

[mandriva:2007.1:sane-devel]
packages=libsane1-devel

[mandriva:2007.1:scanimage]
packages=sane-utils

[mandriva:2007.1:xsane]
packages=xsane

[mandriva:2007.1:cups-ddk]
packages=cupsddk,cupsddk-drivers

[mandriva:2007.1:python-dbus]
packages=dbus-python,python-gobject

[mandriva:2007.1:dbus]
packages=libdbus-1_3-devel

[mandriva:2007.1:python-ctypes]
packages=python-ctypes

[mandriva:2007.1:cups-image]
packages=cups-devel

[mandriva:2007.1:network]
packages=wget

[mandriva:2007.1:avahi-utils]
packages=avahi

[mandriva:2007.1:automake]
packages=automake1.11

[mandriva:2007.1:epm]
packages=epm

# ********************
[mandriva:2008.0]
code_name=2k7
supported=0
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=2.7.12
release_date=2007-4-17
notes=Before proceeding, please add the "contrib", "main", and "updates" installation sources to your URPMI configuration./n Open your browser and go to http://easyurpmi.zarb.org/ and follow the instructions provided and then proceed with the HPLIP install. Also you may wish to turn off the cdrom1-12 media sources to speed up the process.
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
foomatic_rip_hplip=1

[mandriva:2008.0:cups]
packages=cups

[mandriva:2008.0:cups-devel]
packages=cups-devel

[mandriva:2008.0:gcc]
packages=gcc-c++

[mandriva:2008.0:gs]
packages=ghostscript

[mandriva:2008.0:libcrypto]
packages=libcryptopp5,libcryptopp5-devel

[mandriva:2008.0:libjpeg]
packages=libjpeg62-dev

[mandriva:2008.0:libnetsnmp-devel]
packages=libsnmp0-devel

[mandriva:2008.0:libpthread]
packages=glibc-i18ndata,glibc_lsb

[mandriva:2008.0:libtool]
packages=libtool

[mandriva:2008.0:libusb]
packages=libusb0.1_4-devel

[mandriva:2008.0:make]
packages=make

[mandriva:2008.0:pil]
packages=python-imaging

[mandriva:2008.0:ppdev]
packages=
commands=su -c "modprobe ppdev"

[mandriva:2008.0:pyqt]
packages=

[mandriva:2008.0:python-devel]
packages=python-devel

[mandriva:2008.0:pyqt4]
packages=python-qt4

[mandriva:2008.0:pyqt4-dbus]
packages=dbus-python

[mandriva:2008.0:python23]
packages=python

[mandriva:2008.0:python2X]
packages=python

[mandriva:2008.0:reportlab]
packages=python-reportlab

[mandriva:2008.0:sane]
packages=sane

[mandriva:2008.0:sane-devel]
packages=libsane1-devel

[mandriva:2008.0:scanimage]
packages=sane-frontends,sane-backends

[mandriva:2008.0:xsane]
packages=xsane

[mandriva:2008.0:cups-ddk]
packages=cupsddk,cupsddk-drivers

[mandriva:2008.0:python-dbus]
packages=python-dbus,python-gobject

[mandriva:2008.0:dbus]
packages=libdbus-1_3-devel

#[mandriva:2008.0:python-ctypes]
#packages=python-ctypes

[mandriva:2008.0:cups-image]
packages=cups-devel

[mandriva:2008.0:network]
packages=wget

[mandriva:2008.0:avahi-utils]
packages=avahi

[mandriva:2008.0:automake]
packages=automake1.11

[mandriva:2008.0:epm]
packages=epm

# ********************
[mandriva:2008.1]
code_name=
supported=0
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=2.7.12
release_date=2007-4-17
notes=Before proceeding, please add the "contrib", "main", and "updates" installation sources to your URPMI configuration./n Open your browser and go to http://easyurpmi.zarb.org/ and follow the instructions provided and then proceed with the HPLIP install. Also you may wish to turn off the cdrom1-12 media sources to speed up the process.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4

[mandriva:2008.1:cups]
packages=cups

[mandriva:2008.1:cups-devel]
packages=cups-devel

[mandriva:2008.1:gcc]
packages=gcc-c++

[mandriva:2008.1:gs]
packages=ghostscript

[mandriva:2008.1:libcrypto]
packages=libcryptopp5,libcryptopp5-devel

[mandriva:2008.1:libjpeg]
packages=libjpeg62-dev

[mandriva:2008.1:libnetsnmp-devel]
packages=libsnmp0-devel

[mandriva:2008.1:libpthread]
packages=glibc-i18ndata,glibc_lsb

[mandriva:2008.1:libtool]
packages=libtool

[mandriva:2008.1:libusb]
packages=libusb0.1_4-devel

[mandriva:2008.1:make]
packages=make

[mandriva:2008.1:pil]
packages=python-imaging

[mandriva:2008.1:ppdev]
packages=
commands=su -c "modprobe ppdev"

#[mandriva:2008.1:pyqt]
#packages=PyQt

[mandriva:2008.1:python-devel]
packages=python-devel

[mandriva:2008.1:pyqt4]
packages=python-qt4

[mandriva:2008.1:pyqt4-dbus]
packages=dbus-python

[mandriva:2008.1:python23]
packages=python

[mandriva:2008.1:python2X]
packages=python

[mandriva:2008.1:reportlab]
packages=python-reportlab

[mandriva:2008.1:sane]
packages=sane

[mandriva:2008.1:sane-devel]
packages=libsane1-devel

[mandriva:2008.1:scanimage]
packages=sane-frontends,sane-backends

[mandriva:2008.1:xsane]
packages=xsane

[mandriva:2008.1:cups-ddk]
packages=cupsddk,cupsddk-drivers

[mandriva:2008.1:python-dbus]
packages=python-dbus,python-gobject

[mandriva:2008.1:dbus]
packages=libdbus-1-devel

#[mandriva:2008.1:python-ctypes]
#packages=python-ctypes

[mandriva:2008.1:cups-image]
packages=cups-devel

[mandriva:2008.1:network]
packages=wget

[mandriva:2008.1:avahi-utils]
packages=avahi

[mandriva:2008.1:automake]
packages=automake1.11

[mandriva:2008.1:epm]
packages=epm

# ********************
[mandriva:2009]
code_name=
supported=0
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=2.8.7
release_date=2007-4-17
notes=Before proceeding, please add the "contrib", "main", and "updates" installation sources to your URPMI configuration./n Open your browser and go to http://easyurpmi.zarb.org/ and follow the instructions provided and then proceed with the HPLIP install. Also you may wish to turn off the cdrom1-12 media sources to speed up the process.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
policykit=1

[mandriva:2009:cups]
packages=cups

[mandriva:2009:cups-devel]
packages=cups-devel

[mandriva:2009:gcc]
packages=gcc-c++

[mandriva:2009:gs]
packages=ghostscript

[mandriva:2009:libcrypto]
packages=libcryptopp5,libcryptopp5-devel

[mandriva:2009:libjpeg]
packages=libjpeg62-dev

[mandriva:2009:libnetsnmp-devel]
packages=libsnmp0-devel

[mandriva:2009:libpthread]
packages=glibc-i18ndata-2.4-4mdk,glibc_lsb-2.3.6-1mdk

[mandriva:2009:libtool]
packages=libtool

[mandriva:2009:libusb]
packages=libusb0.1_4-devel

[mandriva:2009:make]
packages=make

[mandriva:2009:pil]
packages=python-imaging

[mandriva:2009:ppdev]
packages=
commands=su -c "modprobe ppdev"

[mandriva:2009:pyqt]
packages=PyQt

[mandriva:2009:python-devel]
packages=python-devel

[mandriva:2009:pyqt4]
packages=python-qt4

[mandriva:2009:pyqt4-dbus]
packages=dbus-python

[mandriva:2009:python23]
packages=python

[mandriva:2009:python2X]
packages=python

[mandriva:2009:reportlab]
packages=python-reportlab

[mandriva:2009:sane]
packages=sane

[mandriva:2009:sane-devel]
packages=libsane1-devel

[mandriva:2009:scanimage]
packages=sane-utils

[mandriva:2009:xsane]
packages=xsane

[mandriva:2009:cups-ddk]
packages=cupsddk,cupsddk-drivers

[mandriva:2009:python-dbus]
packages=python-dbus,python-gobject

[mandriva:2009:dbus]
packages=libdbus-1_3-devel,python-gobject

[mandriva:2009:python-ctypes]
packages=python-ctypes

[mandriva:2009:cups-image]
packages=cups-devel

[mandriva:2009:policykit]
packages=policykit,policykit-gnome

[mandriva:2009:network]
packages=wget

[mandriva:2009:avahi-utils]
packages=avahi

[mandriva:2009:automake]
packages=automake1.11

[mandriva:2009:epm]
packages=epm

# ********************
[mandriva:2009.0]
code_name=
supported=0
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=2.8.7
release_date=2007-4-17
notes=Before proceeding, please add the "contrib", "main", and "updates" installation sources to your URPMI configuration./n Open your browser and go to http://easyurpmi.zarb.org/ and follow the instructions provided and then proceed with the HPLIP install. Also you may wish to turn off the cdrom1-12 media sources to speed up the process.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
policykit=1

[mandriva:2009.0:cups]
packages=cups

[mandriva:2009.0:cups-devel]
packages=cups-devel

[mandriva:2009.0:gcc]
packages=gcc-c++

[mandriva:2009.0:gs]
packages=ghostscript

[mandriva:2009.0:libcrypto]
packages=libcryptopp5,libcryptopp5-devel

[mandriva:2009.0:libjpeg]
packages=libjpeg62-dev

[mandriva:2009.0:libnetsnmp-devel]
packages=libsnmp0-devel

[mandriva:2009.0:libpthread]
packages=glibc-i18ndata-2.4-4mdk,glibc_lsb-2.3.6-1mdk

[mandriva:2009.0:libtool]
packages=libtool

[mandriva:2009.0:libusb]
packages=libusb0.1_4-devel

[mandriva:2009.0:make]
packages=make

[mandriva:2009.0:pil]
packages=python-imaging

[mandriva:2009.0:ppdev]
packages=
commands=su -c "modprobe ppdev"

[mandriva:2009.0:pyqt]
packages=PyQt

[mandriva:2009.0:python-devel]
packages=python-devel

[mandriva:2009.0:pyqt4]
packages=python-qt4

[mandriva:2009.0:pyqt4-dbus]
packages=dbus-python

[mandriva:2009.0:python23]
packages=python

[mandriva:2009.0:python2X]
packages=python

[mandriva:2009.0:reportlab]
packages=python-reportlab

[mandriva:2009.0:sane]
packages=sane

[mandriva:2009.0:sane-devel]
packages=libsane1-devel

[mandriva:2009.0:scanimage]
packages=sane-utils

[mandriva:2009.0:xsane]
packages=xsane

[mandriva:2009.0:cups-ddk]
packages=cupsddk,cupsddk-drivers

[mandriva:2009.0:python-dbus]
packages=python-dbus,python-gobject

[mandriva:2009.0:dbus]
packages=libdbus-1-devel

[mandriva:2009.0:python-ctypes]
packages=python-ctypes

[mandriva:2009.0:cups-image]
packages=cups-devel

[mandriva:2009.0:policykit]
packages=policykit,policykit-gnome

[mandriva:2009.0:network]
packages=wget

[mandriva:2009.0:avahi-utils]
packages=avahi

[mandriva:2009.0:automake]
packages=automake1.11

[mandriva:2009.0:epm]
packages=epm

# ********************
[mandriva:2010.0]
code_name=
supported=0
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.9.12
release_date=2009-11-03
notes=Before proceeding, please add the "contrib", "main", and "updates" installation sources to your URPMI configuration./n Open your browser and go to http://easyurpmi.zarb.org/ and follow the instructions provided and then proceed with the HPLIP install. Also you may wish to turn off the cdrom1-12 media sources to speed up the process.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
policykit=1

[mandriva:2010.0:cups]
packages=cups,cups-common

[mandriva:2010.0:cups-devel]
packages=libcups2-devel

[mandriva:2010.0:gcc]
packages=gcc-c++

[mandriva:2010.0:gs]
packages=ghostscript

[mandriva:2010.0:libcrypto]
packages=libopenssl0.9.8-devel

[mandriva:2010.0:libjpeg]
packages=libjpeg-devel

[mandriva:2010.0:libnetsnmp-devel]
packages=libnet-snmp-devel

[mandriva:2010.0:libpthread]
packages=glibc-i18ndata,glibc_lsb

[mandriva:2010.0:libtool]
packages=libtool,libgphoto-devel

[mandriva:2010.0:libusb]
packages=libusb1.0-devel

[mandriva:2010.0:make]
packages=make

[mandriva:2010.0:pil]
packages=python-imaging

[mandriva:2010.0:ppdev]
packages=
commands=su -c "modprobe ppdev"

[mandriva:2010.0:pyqt]
packages=python-qt4

[mandriva:2010.0:python-devel]
packages=libpython2.6-devel

[mandriva:2010.0:pyqt4]
packages=python-qt4

[mandriva:2010.0:pyqt4-dbus]
packages=qt4-qtdbus

[mandriva:2010.0:python23]
packages=python

[mandriva:2010.0:python2X]
packages=python

[mandriva:2010.0:reportlab]
packages=python-reportlab

[mandriva:2010.0:sane]
packages=saned

[mandriva:2010.0:sane-devel]
packages=libsane1-devel,sane-backends

[mandriva:2010.0:scanimage]
packages=libsane1

[mandriva:2010.0:xsane]
packages=xsane,sane-frontends

[mandriva:2010.0:cups-ddk]
packages=cups

[mandriva:2010.0:python-dbus]
packages=python-dbus,python-gobject

[mandriva:2010.0:dbus]
packages=libdbus-1-devel,python-gobject

[mandriva:2010.0:python-ctypes]
packages=python

[mandriva:2010.0:cups-image]
packages=libcups2

[mandriva:2010.0:policykit]
packages=policykit,policykit-gnome

[mandriva:2010.0:network]
packages=wget

[mandriva:2010.0:avahi-utils]
packages=avahi

[mandriva:2010.0:automake]
packages=automake1.11

[mandriva:2010.0:epm]
packages=epm

# ********************
[mandriva:2011.0]
code_name=
supported=0
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.9.12
release_date=2009-11-03
notes=Before proceeding, please add the "contrib", "main", and "updates" installation sources to your URPMI configuration./n Open your browser and go to http://easyurpmi.zarb.org/ and follow the instructions provided and then proceed with the HPLIP install. Also you may wish to turn off the cdrom1-12 media sources to speed up the process.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
policykit=1

[mandriva:2011.0:cups]
packages=cups,cups-common

[mandriva:2011.0:cups-devel]
packages=libcups2-devel

[mandriva:2011.0:gcc]
packages=gcc-c++

[mandriva:2011.0:gs]
packages=ghostscript

[mandriva:2011.0:libcrypto]
packages=libopenssl0.9.8-devel

[mandriva:2011.0:libjpeg]
packages=libjpeg-devel

[mandriva:2011.0:libnetsnmp-devel]
packages=libnet-snmp-devel

[mandriva:2011.0:libpthread]
packages=glibc-i18ndata,glibc_lsb

[mandriva:2011.0:libtool]
packages=libtool,libgphoto-devel

[mandriva:2011.0:libusb]
packages=libusb1.0-devel

[mandriva:2011.0:make]
packages=make

[mandriva:2011.0:pil]
packages=python-imaging

[mandriva:2011.0:ppdev]
packages=
commands=su -c "modprobe ppdev"

[mandriva:2011.0:pyqt]
packages=python-qt4

[mandriva:2011.0:python-devel]
packages=libpython2.6-devel

[mandriva:2011.0:pyqt4]
packages=python-qt4

[mandriva:2011.0:pyqt4-dbus]
packages=qt4-qtdbus

[mandriva:2011.0:python23]
packages=python

[mandriva:2011.0:python2X]
packages=python

[mandriva:2011.0:reportlab]
packages=python-reportlab

[mandriva:2011.0:sane]
packages=saned

[mandriva:2011.0:sane-devel]
packages=libsane1-devel,sane-backends

[mandriva:2011.0:scanimage]
packages=libsane1

[mandriva:2011.0:xsane]
packages=xsane,sane-frontends

[mandriva:2011.0:cups-ddk]
packages=cups

[mandriva:2011.0:python-dbus]
packages=python-dbus,python-gobject

[mandriva:2011.0:dbus]
packages=libdbus-1-devel,python-gobject

[mandriva:2011.0:python-ctypes]
packages=python

[mandriva:2011.0:cups-image]
packages=libcups2

[mandriva:2011.0:policykit]
packages=policykit,policykit-gnome

[mandriva:2011.0:network]
packages=wget

[mandriva:2011.0:avahi-utils]
packages=avahi

[mandriva:2011.0:automake]
packages=automake1.11

[mandriva:2011.0:epm]
packages=epm

# ****************************************
[linuxmint]
index=22
versions=13,14,15,16,17,17.1,17.2,17.3,18,18.1,18.2,18.3,19,19.1,19.2
display_name=Linux Mint
alt_names=mint, mint linux
display=1
notes=
package_mgrs=dpkg,apt-get,synaptic,update-manager,adept,aptitude,adept-updater
package_mgr_cmd=sudo apt-get install --assume-yes $packages_to_install
pre_depend_cmd=sudo dpkg --configure -a,sudo apt-get install --yes --force-yes -f,sudo apt-get update
post_depend_cmd=
scanjet_depend_cmd=sudo apt-get install --assume-yes python-pip,sudo pip install --upgrade pip,sudo -H pip install setuptools,sudo pip install --upgrade setuptools,sudo apt-get install --assume-yes libleptonica-dev,sudo apt-get install --assume-yes tesseract-ocr,sudo apt-get install --assume-yes libtesseract-dev,sudo -H pip install tesserocr,sudo apt-get install --assume-yes tesseract-ocr-eng,sudo apt-get install --assume-yes libzbar-dev,sudo apt-get install --assume-yes python-zbar,sudo apt-get install --assume-yes python-opencv,sudo apt-get install --assume-yes python-pypdf2,sudo -H pip install imutils,sudo apt-get install --assume-yes imagemagick*,sudo apt-get install --assume-yes graphicsmagick* ,sudo -H pip install pypdfocr,sudo -H pip install scikit-image,sudo -H pip install scipy
scanjet_py3_depend_cmd=sudo apt-get install --assume-yes python3-pip,sudo pip3 install --upgrade pip,sudo -H pip3 install setuptools,sudo pip3 install --upgrade setuptools,sudo apt-get install --assume-yes libleptonica-dev,sudo apt-get install --assume-yes tesseract-ocr,sudo apt-get install --assume-yes libtesseract-dev,sudo -H pip3 install tesserocr,sudo apt-get install --assume-yes tesseract-ocr-eng,sudo -H pip3 install opencv-python,sudo -H pip3 install PyPDF2,sudo -H pip3 install imutils,sudo apt-get install --assume-yes imagemagick*,sudo apt-get install --assume-yes graphicsmagick*,sudo -H pip3 install ocrmypdf,sudo -H pip3 install scikit-image,sudo -H pip3 install scipy
hplip_remove_cmd=sudo aptitude remove --assume-yes hplip hpijs
su_sudo=sudo
ppd_install=ppd
udev_mode_fix=1
ppd_dir=
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP


# ********************

[linuxmint:13]
code_name=Maya
supported=1
scan_supported=1
fax_supported=1
pcard_supported=0
network_supported=1
parallel_supported=0
usb_supported=1
packaged_version=3.12.2
release_date=2012
notes=Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
native_cups=1
acl_rules=1

libdir_path=/usr/lib

[linuxmint:13:cups]
packages=libcups2

[linuxmint:13:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[linuxmint:13:gcc]
packages=build-essential

[linuxmint:13:gs]
packages=ghostscript

[linuxmint:13:libcrypto]
packages=openssl

[linuxmint:13:libjpeg]
packages=libjpeg8-dev

[linuxmint:13:libnetsnmp-devel]
packages=libsnmp-dev

[linuxmint:13:libpthread]
packages=build-essential

[linuxmint:13:libtool]
packages=libtool

[linuxmint:13:libusb]
packages=libusb-1.0.0-dev

[linuxmint:13:make]
packages=build-essential

[linuxmint:13:pil]
packages=python-imaging

[linuxmint:13:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[linuxmint:13:pyqt]
packages=python-qt4

[linuxmint:13:python-devel]
packages=python-dev

[linuxmint:13:pyqt4]
packages=python-qt4

[linuxmint:13:pyqt4-dbus]
packages=python-qt4-dbus

#[linuxmint:13:python23]
#packages=python

[linuxmint:13:python2X]
packages=python

[linuxmint:13:reportlab]
packages=python-reportlab

[linuxmint:13:sane]
packages=libsane

[linuxmint:13:sane-devel]
packages=libsane-dev

[linuxmint:13:scanimage]
packages=sane-utils

[linuxmint:13:xsane]
packages=xsane

[linuxmint:13:python-dbus]
packages=python-dbus,python-gobject

[linuxmint:13:dbus]
packages=libdbus-1-dev

[linuxmint:13:cups-image]
packages=libcupsimage2-dev

[linuxmint:13:cups-ddk]
packages=cups,libcupsimage2-dev

[linuxmint:13:policykit]
packages=policykit-1,policykit-1-gnome

[linuxmint:13:python-notify]
packages=python-notify

[linuxmint:13:network]
packages=wget

[linuxmint:13:avahi-utils]
packages=avahi-utils

[linuxmint:13:python3-notify2]
packages=

[linuxmint:13:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt

[linuxmint:13:python3-pyqt4]
packages=python3-pyqt4

[linuxmint:13:python3-dbus]
packages=python3-dbus,python3-gi

[linuxmint:13:python3-xml]
packages=python3-lxml

[linuxmint:13:python3-devel]
packages=python3-dev

[linuxmint:13:python3-pil]
packages=PKG_FROM_PIP:pillow

[linuxmint:13:automake]
packages=automake1.11

[linuxmint:13:epm]
packages=epm


# ****************************************

[linuxmint:14]
code_name=Nadia
supported=1
scan_supported=1
fax_supported=1
pcard_supported=0
network_supported=1
parallel_supported=0
usb_supported=1
packaged_version=3.13.3
release_date=2012
notes=Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
native_cups=1
acl_rules=1

[linuxmint:14:cups]
packages=libcups2

[linuxmint:14:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[linuxmint:14:gcc]
packages=build-essential

[linuxmint:14:gs]
packages=ghostscript

[linuxmint:14:libcrypto]
packages=openssl

[linuxmint:14:libjpeg]
packages=libjpeg8-dev

[linuxmint:14:libnetsnmp-devel]
packages=libsnmp-dev

[linuxmint:14:libpthread]
packages=build-essential

[linuxmint:14:libtool]
packages=libtool

[linuxmint:14:libusb]
packages=libusb-1.0.0-dev

[linuxmint:14:make]
packages=build-essential

[linuxmint:14:pil]
packages=python-imaging

[linuxmint:14:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[linuxmint:14:pyqt]
packages=python-qt4

[linuxmint:14:python-devel]
packages=python-dev

[linuxmint:14:pyqt4]
packages=python-qt4

[linuxmint:14:pyqt4-dbus]
packages=python-qt4-dbus

#[linuxmint:14:python23]
#packages=python

[linuxmint:14:python2X]
packages=python

[linuxmint:14:reportlab]
packages=python-reportlab

[linuxmint:14:sane]
packages=libsane

[linuxmint:14:sane-devel]
packages=libsane-dev

[linuxmint:14:scanimage]
packages=sane-utils

[linuxmint:14:xsane]
packages=xsane

[linuxmint:14:python-dbus]
packages=python-dbus,python-gobject

[linuxmint:14:dbus]
packages=libdbus-1-dev

[linuxmint:14:cups-image]
packages=libcupsimage2-dev

[linuxmint:14:cups-ddk]
packages=cups,libcupsimage2-dev

[linuxmint:14:policykit]
packages=policykit-1,policykit-1-gnome

[linuxmint:14:python-notify]
packages=python-notify

[linuxmint:14:network]
packages=wget

[linuxmint:14:avahi-utils]
packages=avahi-utils

[linuxmint:14:python3-notify2]
packages=python3-notify2

[linuxmint:14:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt

[linuxmint:14:python3-pyqt4]
packages=python3-pyqt4

[linuxmint:14:python3-dbus]
packages=python3-dbus,python3-gi

[linuxmint:14:python3-xml]
packages=python3-lxml

[linuxmint:14:python3-devel]
packages=python3-dev

[linuxmint:14:python3-pil]
packages=PKG_FROM_PIP:pillow

[linuxmint:14:automake]
packages=automake1.11

[linuxmint:14:epm]
packages=epm


# ****************************************

[linuxmint:15]
code_name=Olivia
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.13.3
release_date=2013
notes=Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
native_cups=1
acl_rules=1

libdir_path=/usr/lib/x86_64-linux-gnu

[linuxmint:15:cups]
packages=libcups2

[linuxmint:15:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[linuxmint:15:gcc]
packages=build-essential

[linuxmint:15:gs]
packages=ghostscript

[linuxmint:15:libcrypto]
packages=openssl

[linuxmint:15:libjpeg]
packages=libjpeg8-dev

[linuxmint:15:libnetsnmp-devel]
packages=libsnmp-dev,snmp-mibs-downloader

[linuxmint:15:libpthread]
packages=build-essential

[linuxmint:15:libtool]
packages=libtool

[linuxmint:15:libusb]
packages=libusb-1.0.0-dev

[linuxmint:15:make]
packages=build-essential

[linuxmint:15:pil]
packages=python-imaging

[linuxmint:15:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[linuxmint:15:pyqt]
packages=python-qt4

[linuxmint:15:python-devel]
packages=python-dev

[linuxmint:15:pyqt4]
packages=python-qt4

[linuxmint:15:pyqt4-dbus]
packages=python-qt4-dbus

#[linuxmint:15:python23]
#packages=python

[linuxmint:15:python2X]
packages=python

[linuxmint:15:reportlab]
packages=python-reportlab

[linuxmint:15:sane]
packages=libsane

[linuxmint:15:sane-devel]
packages=libsane-dev

[linuxmint:15:scanimage]
packages=sane-utils

[linuxmint:15:xsane]
packages=xsane

[linuxmint:15:python-dbus]
packages=python-dbus,python-gobject

[linuxmint:15:dbus]
packages=libdbus-1-dev

[linuxmint:15:cups-image]
packages=libcupsimage2-dev

[linuxmint:15:cups-ddk]
packages=cups,libcupsimage2-dev

[linuxmint:15:policykit]
packages=policykit-1,policykit-1-gnome

[linuxmint:15:python-notify]
packages=python-notify

[linuxmint:15:network]
packages=wget

[linuxmint:15:avahi-utils]
packages=avahi-utils


[linuxmint:15:python3-notify2]
packages=python3-notify2

[linuxmint:15:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt

[linuxmint:15:python3-pyqt4]
packages=python3-pyqt4

[linuxmint:15:python3-dbus]
packages=python3-dbus,python3-gi

[linuxmint:15:python3-xml]
packages=python3-lxml

[linuxmint:15:python3-devel]
packages=python3-dev

[linuxmint:15:python3-pil]
packages=PKG_FROM_PIP:pillow

[linuxmint:15:automake]
packages=automake1.11

[linuxmint:15:epm]
packages=epm

# ****************************************

[linuxmint:16]
code_name=Petra
packaged_version=3.14.1
release_date=30/11/2013
same_as_version=15

# ****************************************

[linuxmint:17]
code_name=Qiana
packaged_version=3.14.3
release_date=31/05/2014
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
notes=Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
native_cups=1
acl_rules=1

libdir_path=/usr/lib/x86_64-linux-gnu

[linuxmint:17:cups]
packages=libcups2

[linuxmint:17:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[linuxmint:17:gcc]
packages=build-essential

[linuxmint:17:gs]
packages=ghostscript

[linuxmint:17:libcrypto]
packages=openssl

[linuxmint:17:libjpeg]
packages=libjpeg8-dev

[linuxmint:17:libnetsnmp-devel]
packages=libsnmp-dev,snmp-mibs-downloader

[linuxmint:17:libpthread]
packages=build-essential

[linuxmint:17:libtool]
packages=libtool

[linuxmint:17:libusb]
packages=libusb-1.0.0-dev

[linuxmint:17:make]
packages=build-essential

[linuxmint:17:pil]
packages=python-imaging

[linuxmint:17:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[linuxmint:17:pyqt]
packages=python-qt4

[linuxmint:17:python-devel]
packages=python-dev

[linuxmint:17:pyqt4]
packages=python-qt4

[linuxmint:17:pyqt4-dbus]
packages=python-qt4-dbus

#[linuxmint:17:python23]
#packages=python

[linuxmint:17:python2X]
packages=python

[linuxmint:17:reportlab]
packages=python-reportlab

[linuxmint:17:sane]
packages=libsane

[linuxmint:17:sane-devel]
packages=libsane-dev

[linuxmint:17:scanimage]
packages=sane-utils

[linuxmint:17:xsane]
packages=xsane

[linuxmint:17:python-dbus]
packages=python-dbus,python-gobject

[linuxmint:17:dbus]
packages=libdbus-1-dev

[linuxmint:17:cups-image]
packages=libcupsimage2-dev

[linuxmint:17:cups-ddk]
packages=cups,libcupsimage2-dev

[linuxmint:17:policykit]
packages=policykit-1,policykit-1-gnome

[linuxmint:17:python-notify]
packages=python-notify

[linuxmint:17:network]
packages=wget

[linuxmint:17:avahi-utils]
packages=avahi-utils

[linuxmint:17:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt

[linuxmint:17:python3-pyqt4]
packages=python3-pyqt4

[linuxmint:17:python3-dbus]
packages=python3-dbus,python3-gi

[linuxmint:17:python3-xml]
packages=python3-lxml

[linuxmint:17:python3-devel]
packages=python3-dev

[linuxmint:17:python3-pil]
packages=python3-pil

[linuxmint:17:python3-reportlab]
packages=python3-reportlab

[linuxmint:17:python3-notify2]
packages=python3-notify2

[linuxmint:17:automake]
packages=automake1.11

[linuxmint:17:epm]
packages=epm

# ****************************************

[linuxmint:17.1]
code_name=Rebecca
packaged_version=3.14.3
release_date=29/11/2014
same_as_version=17

# ****************************************

[linuxmint:17.2]
code_name=Rafaela
packaged_version=3.15.2
release_date=07/08/2015
same_as_version=17

# ****************************************

[linuxmint:17.3]
code_name=Rosa
packaged_version=3.15.4
release_date=20/12/2015
same_as_version=17

[linuxmint:17.3:python-notify]
packages=python-notify,mate-notification-daemon

# ****************************************

[linuxmint:18]
code_name=Sarah
packaged_version=3.16.8
release_date=27/08/16
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
notes=Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
native_cups=1
acl_rules=1

libdir_path=/usr/lib/x86_64-linux-gnu

[linuxmint:18:cups]
packages=libcups2

[linuxmint:18:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[linuxmint:18:gcc]
packages=build-essential

[linuxmint:18:gs]
packages=ghostscript

[linuxmint:18:libcrypto]
packages=openssl

[linuxmint:18:libjpeg]
packages=libjpeg8-dev

[linuxmint:18:libnetsnmp-devel]
packages=libsnmp-dev,snmp-mibs-downloader

[linuxmint:18:libpthread]
packages=build-essential

[linuxmint:18:libtool]
packages=libtool,libtool-bin

[linuxmint:18:libusb]
packages=libusb-1.0.0-dev

[linuxmint:18:make]
packages=build-essential

[linuxmint:18:pil]
packages=python-imaging

[linuxmint:18:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[linuxmint:18:pyqt]
packages=python-qt4

[linuxmint:18:python-devel]
packages=python-dev

[linuxmint:18:pyqt4]
packages=python-qt4

[linuxmint:18:pyqt4-dbus]
packages=python-qt4-dbus

#[linuxmint:18:python23]
#packages=python

[linuxmint:18:python2X]
packages=python

[linuxmint:18:reportlab]
packages=python-reportlab

[linuxmint:18:sane]
packages=libsane

[linuxmint:18:sane-devel]
packages=libsane-dev

[linuxmint:18:scanimage]
packages=sane-utils

[linuxmint:18:xsane]
packages=xsane

[linuxmint:18:python-dbus]
packages=python-dbus,python-gobject

[linuxmint:18:dbus]
packages=libdbus-1-dev

[linuxmint:18:cups-image]
packages=libcupsimage2-dev

[linuxmint:18:cups-ddk]
packages=cups,libcupsimage2-dev

[linuxmint:18:policykit]
packages=policykit-1,policykit-1-gnome

[linuxmint:18:python-notify]
packages=python-notify

[linuxmint:18:network]
packages=wget

[linuxmint:18:avahi-utils]
packages=avahi-utils

[linuxmint:18:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt

[linuxmint:18:python3-pyqt4]
packages=python3-pyqt4

[linuxmint:18:python3-dbus]
packages=python3-dbus,python3-gi

[linuxmint:18:python3-xml]
packages=python3-lxml

[linuxmint:18:python3-devel]
packages=python3-dev

[linuxmint:18:python3-pil]
packages=python3-pil

[linuxmint:18:python3-reportlab]
packages=python3-reportlab

[linuxmint:18:python3-notify2]
packages=python3-notify2,mate-notification-daemon

[linuxmint:18:automake]
packages=automake1.11

[linuxmint:18:epm]
packages=epm

# ****************************************

[linuxmint:18.1]
code_name=Serena
packaged_version=3.17.4
release_date=27/04/17
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
notes=Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
native_cups=1
acl_rules=1

libdir_path=/usr/lib/x86_64-linux-gnu

[linuxmint:18.1:cups]
packages=libcups2

[linuxmint:18.1:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[linuxmint:18.1:gcc]
packages=build-essential

[linuxmint:18.1:gs]
packages=ghostscript

[linuxmint:18.1:libcrypto]
packages=openssl

[linuxmint:18.1:libjpeg]
packages=libjpeg8-dev

[linuxmint:18.1:libnetsnmp-devel]
packages=libsnmp-dev,snmp-mibs-downloader

[linuxmint:18.1:libpthread]
packages=build-essential

[linuxmint:18.1:libtool]
packages=libtool,libtool-bin

[linuxmint:18.1:libusb]
packages=libusb-1.0.0-dev

[linuxmint:18.1:make]
packages=build-essential

[linuxmint:18.1:pil]
packages=python-imaging

[linuxmint:18.1:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[linuxmint:18.1:pyqt]
packages=python-qt4

[linuxmint:18.1:python-devel]
packages=python-dev

[linuxmint:18.1:pyqt4]
packages=python-qt4

[linuxmint:18.1:pyqt4-dbus]
packages=python-qt4-dbus

#[linuxmint:18.1:python23]
#packages=python

[linuxmint:18.1:python2X]
packages=python

[linuxmint:18.1:reportlab]
packages=python-reportlab

[linuxmint:18.1:sane]
packages=libsane

[linuxmint:18.1:sane-devel]
packages=libsane-dev

[linuxmint:18.1:scanimage]
packages=sane-utils

[linuxmint:18.1:xsane]
packages=xsane

[linuxmint:18.1:python-dbus]
packages=python-dbus,python-gobject

[linuxmint:18.1:dbus]
packages=libdbus-1-dev

[linuxmint:18.1:cups-image]
packages=libcupsimage2-dev

[linuxmint:18.1:cups-ddk]
packages=cups,libcupsimage2-dev

[linuxmint:18.1:policykit]
packages=policykit-1,policykit-1-gnome

[linuxmint:18.1:python-notify]
packages=python-notify

[linuxmint:18.1:network]
packages=wget

[linuxmint:18.1:avahi-utils]
packages=avahi-utils

[linuxmint:18.1:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt

[linuxmint:18.1:python3-pyqt4]
packages=python3-pyqt4

[linuxmint:18.1:python3-dbus]
packages=python3-dbus,python3-gi

[linuxmint:18.1:python3-xml]
packages=python3-lxml

[linuxmint:18.1:python3-devel]
packages=python3-dev

[linuxmint:18.1:python3-pil]
packages=python3-pil

[linuxmint:18.1:python3-reportlab]
packages=python3-reportlab

[linuxmint:18.1:python3-notify2]
packages=python3-notify2,mate-notification-daemon

[linuxmint:18.1:automake]
packages=automake1.11

[linuxmint:18.1:epm]
packages=epm

# ****************************************

[linuxmint:18.2]
code_name=Sonya
packaged_version=3.17.9
release_date=02/07/17
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
notes=Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
native_cups=1
acl_rules=1

libdir_path=/usr/lib/x86_64-linux-gnu

[linuxmint:18.2:cups]
packages=libcups2

[linuxmint:18.2:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[linuxmint:18.2:gcc]
packages=build-essential

[linuxmint:18.2:gs]
packages=ghostscript

[linuxmint:18.2:libcrypto]
packages=openssl

[linuxmint:18.2:libjpeg]
packages=libjpeg8-dev

[linuxmint:18.2:libnetsnmp-devel]
packages=libsnmp-dev,snmp-mibs-downloader

[linuxmint:18.2:libpthread]
packages=build-essential

[linuxmint:18.2:libtool]
packages=libtool,libtool-bin

[linuxmint:18.2:libusb]
packages=libusb-1.0.0-dev

[linuxmint:18.2:make]
packages=build-essential

[linuxmint:18.2:pil]
packages=python-imaging

[linuxmint:18.2:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[linuxmint:18.2:pyqt]
packages=python-qt4

[linuxmint:18.2:python-devel]
packages=python-dev

[linuxmint:18.2:pyqt4]
packages=python-qt4

[linuxmint:18.2:pyqt4-dbus]
packages=python-qt4-dbus

#[linuxmint:18.2:python23]
#packages=python

[linuxmint:18.2:python2X]
packages=python

[linuxmint:18.2:reportlab]
packages=python-reportlab

[linuxmint:18.2:sane]
packages=libsane

[linuxmint:18.2:sane-devel]
packages=libsane-dev

[linuxmint:18.2:scanimage]
packages=sane-utils

[linuxmint:18.2:xsane]
packages=xsane

[linuxmint:18.2:python-dbus]
packages=python-dbus,python-gobject

[linuxmint:18.2:dbus]
packages=libdbus-1-dev

[linuxmint:18.2:cups-image]
packages=libcupsimage2-dev

[linuxmint:18.2:cups-ddk]
packages=cups,libcupsimage2-dev

[linuxmint:18.2:policykit]
packages=policykit-1,policykit-1-gnome

[linuxmint:18.2:python-notify]
packages=python-notify

[linuxmint:18.2:network]
packages=wget

[linuxmint:18.2:avahi-utils]
packages=avahi-utils

[linuxmint:18.2:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt

[linuxmint:18.2:python3-pyqt4]
packages=python3-pyqt4

[linuxmint:18.2:python3-dbus]
packages=python3-dbus,python3-gi

[linuxmint:18.2:python3-xml]
packages=python3-lxml

[linuxmint:18.2:python3-devel]
packages=python3-dev

[linuxmint:18.2:python3-pil]
packages=python3-pil

[linuxmint:18.2:python3-reportlab]
packages=python3-reportlab

[linuxmint:18.2:python3-notify2]
packages=python3-notify2,mate-notification-daemon

[linuxmint:18.2:automake]
packages=automake1.11

[linuxmint:18.2:epm]
packages=epm


# ****************************************

[linuxmint:18.3]
code_name=Sylvia
packaged_version=3.18.2
release_date=27/11/17
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
notes=Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
native_cups=1
acl_rules=1
#scanjet_depend_cmd=sudo apt-get install --assume-yes python2-pip,sudo pip2 install --upgrade pip,sudo -H pip2 install setuptools,sudo pip2 install --upgrade setuptools,sudo apt-get install --assume-yes libleptonica-dev,sudo apt-get install --assume-yes tesseract-ocr,sudo apt-get install --assume-yes libtesseract-dev,sudo -H pip2 install tesserocr,sudo apt-get install --assume-yes tesseract-ocr-all,sudo apt-get install --assume-yes libzbar-dev,sudo apt-get install --assume-yes python-zbar,sudo apt-get install --assume-yes python-opencv,sudo apt-get install --assume-yes python-pypdf2,sudo -H pip2 install imutils,sudo -H pip2 install pypdfocr,sudo -H pip2 install scikit-image,sudo -H pip2 install scipy
#scanjet_py3_depend_cmd=sudo apt-get install --assume-yes python3-pip,sudo pip3 install --upgrade pip,sudo -H pip3 install setuptools,sudo pip3 install --upgrade setuptools,sudo apt-get install --assume-yes libleptonica-dev,sudo apt-get install --assume-yes tesseract-ocr,sudo apt-get install --assume-yes libtesseract-dev,sudo -H pip3 install tesserocr,sudo apt-get install --assume-yes tesseract-ocr-all,sudo -H pip3 install opencv-python,sudo -H pip3 install PyPDF2,sudo -H pip3 install imutils,sudo -H pip3 install ocrmypdf,sudo -H pip3 install scikit-image,sudo -H pip3 install scipy

libdir_path=/usr/lib/x86_64-linux-gnu

[linuxmint:18.3:cups]
packages=libcups2

[linuxmint:18.3:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[linuxmint:18.3:gcc]
packages=build-essential

[linuxmint:18.3:gs]
packages=ghostscript

[linuxmint:18.3:libcrypto]
packages=openssl

[linuxmint:18.3:libjpeg]
packages=libjpeg8-dev

[linuxmint:18.3:libnetsnmp-devel]
packages=libsnmp-dev,snmp-mibs-downloader

[linuxmint:18.3:libpthread]
packages=build-essential

[linuxmint:18.3:libtool]
packages=libtool,libtool-bin

[linuxmint:18.3:libusb]
packages=libusb-1.0.0-dev

[linuxmint:18.3:make]
packages=build-essential

[linuxmint:18.3:pil]
packages=python-imaging

[linuxmint:18.3:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[linuxmint:18.3:pyqt]
packages=python-qt4

[linuxmint:18.3:python-devel]
packages=python-dev

[linuxmint:18.3:pyqt4]
packages=python-qt4

[linuxmint:18.3:pyqt4-dbus]
packages=python-qt4-dbus

#[linuxmint:18.3:python23]
#packages=python

[linuxmint:18.3:python2X]
packages=python

[linuxmint:18.3:reportlab]
packages=python-reportlab

[linuxmint:18.3:sane]
packages=libsane

[linuxmint:18.3:sane-devel]
packages=libsane-dev

[linuxmint:18.3:scanimage]
packages=sane-utils

[linuxmint:18.3:xsane]
packages=xsane

[linuxmint:18.3:python-dbus]
packages=python-dbus,python-gobject

[linuxmint:18.3:dbus]
packages=libdbus-1-dev

[linuxmint:18.3:cups-image]
packages=libcupsimage2-dev

[linuxmint:18.3:cups-ddk]
packages=cups,libcupsimage2-dev

[linuxmint:18.3:policykit]
packages=policykit-1,policykit-1-gnome

[linuxmint:18.3:python-notify]
packages=python-notify

[linuxmint:18.3:network]
packages=wget

[linuxmint:18.3:avahi-utils]
packages=avahi-utils

[linuxmint:18.3:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt

[linuxmint:18.3:python3-pyqt4]
packages=python3-pyqt4

[linuxmint:18.3:python3-dbus]
packages=python3-dbus,python3-gi

[linuxmint:18.3:python3-xml]
packages=python3-lxml

[linuxmint:18.3:python3-devel]
packages=python3-dev

[linuxmint:18.3:python3-pil]
packages=python3-pil

[linuxmint:18.3:python3-reportlab]
packages=python3-reportlab

[linuxmint:18.3:python3-notify2]
packages=python3-notify2,mate-notification-daemon

[linuxmint:18.3:automake]
packages=automake1.11

[linuxmint:18.3:epm]
packages=epm


# ****************************************

[linuxmint:19]
code_name=Tara
packaged_version=3.18.9
release_date=9/8/18
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
notes=Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
native_cups=1
acl_rules=1
#scanjet_depend_cmd=sudo apt-get install --assume-yes python2-pip,sudo pip2 install --upgrade pip,sudo -H pip2 install setuptools,sudo pip2 install --upgrade setuptools,sudo apt-get install --assume-yes libleptonica-dev,sudo apt-get install --assume-yes tesseract-ocr,sudo apt-get install --assume-yes libtesseract-dev,sudo -H pip2 install tesserocr,sudo apt-get install --assume-yes tesseract-ocr-all,sudo apt-get install --assume-yes libzbar-dev,sudo apt-get install --assume-yes python-zbar,sudo apt-get install --assume-yes python-opencv,sudo apt-get install --assume-yes python-pypdf2,sudo -H pip2 install imutils,sudo -H pip2 install pypdfocr,sudo -H pip2 install scikit-image,sudo -H pip2 install scipy
#scanjet_py3_depend_cmd=sudo apt-get install --assume-yes python3-pip,sudo pip3 install --upgrade pip,sudo -H pip3 install setuptools,sudo pip3 install --upgrade setuptools,sudo apt-get install --assume-yes libleptonica-dev,sudo apt-get install --assume-yes tesseract-ocr,sudo apt-get install --assume-yes libtesseract-dev,sudo -H pip3 install tesserocr,sudo apt-get install --assume-yes tesseract-ocr-all,sudo -H pip3 install opencv-python,sudo -H pip3 install PyPDF2,sudo -H pip3 install imutils,sudo -H pip3 install ocrmypdf,sudo -H pip3 install scikit-image,sudo -H pip3 install scipy

libdir_path=/usr/lib/x86_64-linux-gnu

[linuxmint:19:cups]
packages=libcups2

[linuxmint:19:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[linuxmint:19:gcc]
packages=build-essential

[linuxmint:19:gs]
packages=ghostscript

[linuxmint:19:libcrypto]
packages=openssl

[linuxmint:19:libjpeg]
packages=libjpeg8-dev

[linuxmint:19:libnetsnmp-devel]
packages=libsnmp-dev,snmp-mibs-downloader

[linuxmint:19:libpthread]
packages=build-essential

[linuxmint:19:libtool]
packages=libtool,libtool-bin

[linuxmint:19:libusb]
packages=libusb-1.0.0-dev

[linuxmint:19:make]
packages=build-essential

#[linuxmint:19:pil]
#packages=python-imaging

[linuxmint:19:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[linuxmint:19:pyqt]
packages=python-qt4

[linuxmint:19:python-devel]
packages=python-dev

[linuxmint:19:pyqt4]
packages=python-qt4

[linuxmint:19:pyqt4-dbus]
packages=python-qt4-dbus

#[linuxmint:19:python23]
#packages=python

[linuxmint:19:python2X]
packages=python

[linuxmint:19:reportlab]
packages=python-reportlab

[linuxmint:19:sane]
packages=libsane

[linuxmint:19:sane-devel]
packages=libsane-dev

[linuxmint:19:scanimage]
packages=sane-utils

[linuxmint:19:xsane]
packages=xsane

[linuxmint:19:python-dbus]
packages=python-dbus,python-gobject

[linuxmint:19:dbus]
packages=libdbus-1-dev

[linuxmint:19:cups-image]
packages=libcupsimage2-dev

[linuxmint:19:cups-ddk]
packages=cups,libcupsimage2-dev

[linuxmint:19:policykit]
packages=policykit-1,policykit-1-gnome

[linuxmint:19:python-notify]
packages=python-notify

[linuxmint:19:network]
packages=wget

[linuxmint:19:avahi-utils]
packages=avahi-utils

[linuxmint:19:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt

[linuxmint:19:python3-pyqt4]
packages=python3-pyqt4

[linuxmint:19:python3-dbus]
packages=python3-dbus,python3-gi

[linuxmint:19:python3-xml]
packages=python3-lxml

[linuxmint:19:python3-devel]
packages=python3-dev

[linuxmint:19:python3-pil]
packages=python3-pil

[linuxmint:19:python3-reportlab]
packages=python3-reportlab

[linuxmint:19:python3-notify2]
packages=python3-notify2,mate-notification-daemon

[linuxmint:19:automake]
packages=automake1.11

[linuxmint:19:epm]
packages=epm


# ****************************************

[linuxmint:19.1]
code_name=Tessa
packaged_version=3.19.3
release_date=19/12/18
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
notes=Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
native_cups=1
acl_rules=1
#scanjet_depend_cmd=sudo apt-get install --assume-yes python2-pip,sudo pip2 install --upgrade pip,sudo -H pip2 install setuptools,sudo pip2 install --upgrade setuptools,sudo apt-get install --assume-yes libleptonica-dev,sudo apt-get install --assume-yes tesseract-ocr,sudo apt-get install --assume-yes libtesseract-dev,sudo -H pip2 install tesserocr,sudo apt-get install --assume-yes tesseract-ocr-all,sudo apt-get install --assume-yes libzbar-dev,sudo apt-get install --assume-yes python-zbar,sudo apt-get install --assume-yes python-opencv,sudo apt-get install --assume-yes python-pypdf2,sudo -H pip2 install imutils,sudo -H pip2 install pypdfocr,sudo -H pip2 install scikit-image,sudo -H pip2 install scipy
#scanjet_py3_depend_cmd=sudo apt-get install --assume-yes python3-pip,sudo pip3 install --upgrade pip,sudo -H pip3 install setuptools,sudo pip3 install --upgrade setuptools,sudo apt-get install --assume-yes libleptonica-dev,sudo apt-get install --assume-yes tesseract-ocr,sudo apt-get install --assume-yes libtesseract-dev,sudo -H pip3 install tesserocr,sudo apt-get install --assume-yes tesseract-ocr-all,sudo -H pip3 install opencv-python,sudo -H pip3 install PyPDF2,sudo -H pip3 install imutils,sudo -H pip3 install ocrmypdf,sudo -H pip3 install scikit-image,sudo -H pip3 install scipy

libdir_path=/usr/lib/x86_64-linux-gnu

[linuxmint:19.1:cups]
packages=libcups2

[linuxmint:19.1:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[linuxmint:19.1:gcc]
packages=build-essential

[linuxmint:19.1:gs]
packages=ghostscript

[linuxmint:19.1:libcrypto]
packages=
commands=sudo DEBIAN_FRONTEND=noninteractive apt-get --assume-yes install openssl

[linuxmint:19.1:libjpeg]
packages=libjpeg8-dev

[linuxmint:19.1:libnetsnmp-devel]
packages=
commands=sudo DEBIAN_FRONTEND=noninteractive apt-get --assume-yes install libsnmp-dev,sudo apt-get --assume-yes install snmp-mibs-downloader

[linuxmint:19.1:libpthread]
packages=build-essential

[linuxmint:19.1:libtool]
packages=libtool,libtool-bin

[linuxmint:19.1:libusb]
packages=libusb-1.0.0-dev

[linuxmint:19.1:make]
packages=build-essential

#[linuxmint:19.1:pil]
#packages=python-imaging

[linuxmint:19.1:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[linuxmint:19.1:pyqt]
packages=python-qt4

[linuxmint:19.1:python-devel]
packages=python-dev

[linuxmint:19.1:pyqt4]
packages=python-qt4

[linuxmint:19.1:pyqt4-dbus]
packages=python-qt4-dbus

#[linuxmint:19.1:python23]
#packages=python

[linuxmint:19.1:python2X]
packages=python

[linuxmint:19.1:reportlab]
packages=python-reportlab

[linuxmint:19.1:sane]
packages=libsane

[linuxmint:19.1:sane-devel]
packages=libsane-dev

[linuxmint:19.1:scanimage]
packages=sane-utils

[linuxmint:19.1:xsane]
packages=xsane

[linuxmint:19.1:python-dbus]
packages=python-dbus,python-gobject

[linuxmint:19.1:dbus]
packages=libdbus-1-dev

[linuxmint:19.1:cups-image]
packages=libcupsimage2-dev

[linuxmint:19.1:cups-ddk]
packages=cups,libcupsimage2-dev

[linuxmint:19.1:policykit]
packages=policykit-1,policykit-1-gnome

[linuxmint:19.1:python-notify]
packages=python-notify

[linuxmint:19.1:network]
packages=wget

[linuxmint:19.1:avahi-utils]
packages=avahi-utils

[linuxmint:19.1:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt

[linuxmint:19.1:python3-pyqt4]
packages=python3-pyqt4

[linuxmint:19.1:python3-dbus]
packages=python3-dbus,python3-gi

[linuxmint:19.1:python3-xml]
packages=python3-lxml

[linuxmint:19.1:python3-devel]
packages=python3-dev

[linuxmint:19.1:python3-pil]
packages=python3-pil

[linuxmint:19.1:python3-reportlab]
packages=python3-reportlab

[linuxmint:19.1:python3-notify2]
packages=python3-notify2,mate-notification-daemon

[linuxmint:19.1:automake]
packages=automake1.11

[linuxmint:19.1:epm]
packages=epm

# ****************************************

[linuxmint:19.2]
code_name=Tessa
packaged_version=3.19.8
release_date=19/12/18
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
notes=Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
native_cups=1
acl_rules=1
#scanjet_depend_cmd=sudo apt-get install --assume-yes python2-pip,sudo pip2 install --upgrade pip,sudo -H pip2 install setuptools,sudo pip2 install --upgrade setuptools,sudo apt-get install --assume-yes libleptonica-dev,sudo apt-get install --assume-yes tesseract-ocr,sudo apt-get install --assume-yes libtesseract-dev,sudo -H pip2 install tesserocr,sudo apt-get install --assume-yes tesseract-ocr-all,sudo apt-get install --assume-yes libzbar-dev,sudo apt-get install --assume-yes python-zbar,sudo apt-get install --assume-yes python-opencv,sudo apt-get install --assume-yes python-pypdf2,sudo -H pip2 install imutils,sudo -H pip2 install pypdfocr,sudo -H pip2 install scikit-image,sudo -H pip2 install scipy
#scanjet_py3_depend_cmd=sudo apt-get install --assume-yes python3-pip,sudo pip3 install --upgrade pip,sudo -H pip3 install setuptools,sudo pip3 install --upgrade setuptools,sudo apt-get install --assume-yes libleptonica-dev,sudo apt-get install --assume-yes tesseract-ocr,sudo apt-get install --assume-yes libtesseract-dev,sudo -H pip3 install tesserocr,sudo apt-get install --assume-yes tesseract-ocr-all,sudo -H pip3 install opencv-python,sudo -H pip3 install PyPDF2,sudo -H pip3 install imutils,sudo -H pip3 install ocrmypdf,sudo -H pip3 install scikit-image,sudo -H pip3 install scipy

libdir_path=/usr/lib/x86_64-linux-gnu

[linuxmint:19.2:cups]
packages=libcups2

[linuxmint:19.2:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[linuxmint:19.2:gcc]
packages=build-essential

[linuxmint:19.2:gs]
packages=ghostscript

[linuxmint:19.2:libcrypto]
packages=
commands=sudo DEBIAN_FRONTEND=noninteractive apt-get --assume-yes install openssl

[linuxmint:19.2:libjpeg]
packages=libjpeg8-dev

[linuxmint:19.2:libnetsnmp-devel]
packages=
commands=sudo DEBIAN_FRONTEND=noninteractive apt-get --assume-yes install libsnmp-dev,sudo apt-get --assume-yes install snmp-mibs-downloader

[linuxmint:19.2:libpthread]
packages=build-essential

[linuxmint:19.2:libtool]
packages=libtool,libtool-bin

[linuxmint:19.2:libusb]
packages=libusb-1.0.0-dev

[linuxmint:19.2:make]
packages=build-essential

#[linuxmint:19.2:pil]
#packages=python-imaging

[linuxmint:19.2:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[linuxmint:19.2:pyqt]
packages=python-qt4

[linuxmint:19.2:python-devel]
packages=python-dev

[linuxmint:19.2:pyqt4]
packages=python-qt4

[linuxmint:19.2:pyqt4-dbus]
packages=python-qt4-dbus

#[linuxmint:19.2:python23]
#packages=python

[linuxmint:19.2:python2X]
packages=python

[linuxmint:19.2:reportlab]
packages=python-reportlab

[linuxmint:19.2:sane]
packages=libsane

[linuxmint:19.2:sane-devel]
packages=libsane-dev

[linuxmint:19.2:scanimage]
packages=sane-utils

[linuxmint:19.2:xsane]
packages=xsane

[linuxmint:19.2:python-dbus]
packages=python-dbus,python-gobject

[linuxmint:19.2:dbus]
packages=libdbus-1-dev

[linuxmint:19.2:cups-image]
packages=libcupsimage2-dev

[linuxmint:19.2:cups-ddk]
packages=cups,libcupsimage2-dev

[linuxmint:19.2:policykit]
packages=policykit-1,policykit-1-gnome

[linuxmint:19.2:python-notify]
packages=python-notify

[linuxmint:19.2:network]
packages=wget

[linuxmint:19.2:avahi-utils]
packages=avahi-utils

[linuxmint:19.2:python3-pyqt4-dbus]
packages=python3-dbus.mainloop.qt

[linuxmint:19.2:python3-pyqt4]
packages=python3-pyqt4

[linuxmint:19.2:python3-dbus]
packages=python3-dbus,python3-gi

[linuxmint:19.2:python3-xml]
packages=python3-lxml

[linuxmint:19.2:python3-devel]
packages=python3-dev

[linuxmint:19.2:python3-pil]
packages=python3-pil

[linuxmint:19.2:python3-reportlab]
packages=python3-reportlab

[linuxmint:19.2:python3-notify2]
packages=python3-notify2,mate-notification-daemon

[linuxmint:19.2:automake]
packages=automake1.11

[linuxmint:19.2:epm]
packages=epm


# ****************************************


[linpus]
index=25
versions=9.4,9.5
display_name=Linpus Linux
alt_names=Linpus, Linpus Lite, Linpus Linux
display=1
notes=
package_mgrs=dpkg,apt-get,synaptic,update-manager,adept,aptitude,adept-updater,rpm
package_mgr_cmd=sudo apt-get install --assume-yes $packages_to_install
pre_depend_cmd=sudo apt-get install --yes --force-yes -f,sudo apt-get update
post_depend_cmd=
hplip_remove_cmd=sudo apt-get remove --assume-yes hplip hpijs
su_sudo=sudo
ppd_install=ppd
udev_mode_fix=1
ppd_dir=
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP

# ********************
[linpus:9.5]
code_name=Linpus
supported=0
scan_supported=0
fax_supported=0
pcard_supported=0
network_supported=0
parallel_supported=0
usb_supported=1
packaged_version=
release_date=
notes=Add to the file /etc/apt/sources.list the following lines (each on a seperate line should start with the "rpm": rpm http://update.linpus.com/LinpusUpdate/ 9.5 main desktop rpm http://update.linpus.com/LinpusUpdate/ 9.5-Critical main desktop rpm http://update.linpus.com/LinpusUpdate/ 9.5-DevDr main desktop rpm http://update.linpus.com/LinpusUpdate/ 9.5-SoftApp main desktop
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=none
package_available=0
package_arch=i386

[linpus:9.5:cups]
packages=cups

[linpus:9.5:cups-devel]
packages=

[linpus:9.5:gcc]
packages=glibc

[linpus:9.5:gs]
packages=ghostscript

[linpus:9.5:libcrypto]
packages=openssl

[linpus:9.5:libjpeg]
packages=libjpeg

[linpus:9.5:libnetsnmp-devel]
packages=

[linpus:9.5:libpthread]
packages=glibc

[linpus:9.5:libtool]
packages=

[linpus:9.5:libusb]
packages=

[linpus:9.5:make]
packages=glibc

[linpus:9.5:pil]
packages=

[linpus:9.5:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[linpus:9.5:pyqt]
packages=

[linpus:9.5:python-devel]
packages=

[linpus:9.5:pyqt4]
packages=python-qt4,python-qt4-dbus

[linpus:9.5:pyqt4-dbus]
packages=python-qt4-dbus

[linpus:9.5:python23]
packages=python

[linpus:9.5:python2X]
packages=python

[linpus:9.5:reportlab]
packages=

[linpus:9.5:sane]
packages=

[linpus:9.5:sane-devel]
packages=

[linpus:9.5:scanimage]
packages=

[linpus:9.5:xsane]
packages=

[linpus:9.5:cups-ddk]
packages=

[linpus:9.5:python-dbus]
packages=dbus-python,python-gobject

[linpus:9.5:dbus]
packages=dbus

[linpus:9.5:python-ctypes]
packages=

[linpus:9.5:cups-image]
packages=

[linpus:9.5:network]
packages=wget

[linpus:9.5:avahi-utils]
packages=avahi-tools

[linplus:9.5:automake]
packages=automake1.11

[linplus:9.5:epm]
packages=epm

# ********************
[linpus:9.4]
code_name=Linpus
supported=0
scan_supported=0
fax_supported=0
pcard_supported=0
network_supported=0
parallel_supported=0
usb_supported=1
packaged_version=
release_date=
notes=Add to the file /etc/apt/sources.list the following lines (each on a seperate line should start with the "rpm": rpm http://update.linpus.com/LinpusUpdate/ 9.4 main desktop rpm http://update.linpus.com/LinpusUpdate/ 9.4-Critical main desktop rpm http://update.linpus.com/LinpusUpdate/ 9.4-DevDr main desktop rpm http://update.linpus.com/LinpusUpdate/ 9.4-SoftApp main desktop
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=none
package_available=0
package_arch=i386

[linpus:9.4:cups]
packages=cups

[linpus:9.4:cups-devel]
packages=

[linpus:9.4:gcc]
packages=glibc

[linpus:9.4:gs]
packages=ghostscript

[linpus:9.4:libcrypto]
packages=openssl

[linpus:9.4:libjpeg]
packages=libjpeg

[linpus:9.4:libnetsnmp-devel]
packages=

[linpus:9.4:libpthread]
packages=glibc

[linpus:9.4:libtool]
packages=

[linpus:9.4:libusb]
packages=

[linpus:9.4:make]
packages=glibc

[linpus:9.4:pil]
packages=

[linpus:9.4:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[linpus:9.4:pyqt]
packages=

[linpus:9.4:python-devel]
packages=

[linpus:9.4:pyqt4]
packages=python-qt4

[linpus:9.4:pyqt4-dbus]
packages=python-qt4-dbus

[linpus:9.4:python23]
packages=python

[linpus:9.4:python2X]
packages=python

[linpus:9.4:reportlab]
packages=

[linpus:9.4:sane]
packages=

[linpus:9.4:sane-devel]
packages=

[linpus:9.4:scanimage]
packages=

[linpus:9.4:xsane]
packages=

[linpus:9.4:cups-ddk]
packages=

[linpus:9.4:python-dbus]
packages=dbus-python,python-gobject

[linpus:9.4:dbus]
packages=dbus

[linpus:9.4:python-ctypes]
packages=

[linpus:9.4:cups-image]
packages=

[linpus:9.4:network]
packages=wget

[linpus:9.4:avahi-utils]
packages=avahi-tools

[linplus:9.4:automake]
packages=automake1.11

[linplus:9.4:epm]
packages=epm

# ****************************************
[gos]
index=24
versions=8.04.1
display_name=gOS
alt_names=gos, gOS
display=1
notes=
package_mgrs=dpkg,apt-get,synaptic,update-manager,adept,aptitude,adept-updater
package_mgr_cmd=sudo aptitude install --assume-yes $packages_to_install
pre_depend_cmd=sudo dpkg --configure -a,sudo apt-get install --yes --force-yes -f,sudo aptitude update
post_depend_cmd=
hplip_remove_cmd=sudo aptitude remove --assume-yes hplip hpijs
su_sudo=sudo
ppd_install=ppd
udev_mode_fix=1
ppd_dir=
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP

# ********************
[gos:8.04.1]
code_name=Elyssa
supported=0
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=2.8.2
release_date=2008
notes=Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubunbtu installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4

[gos:8.04.1:cups]
packages=libcupsys2

[gos:8.04.1:cups-devel]
packages=libcupsys2-dev,cupsys-bsd

[gos:8.04.1:gcc]
packages=build-essential

[gos:8.04.1:gs]
packages=gs-esp

[gos:8.04.1:libcrypto]
packages=openssl

[gos:8.04.1:libjpeg]
packages=libjpeg62-dev

[gos:8.04.1:libnetsnmp-devel]
packages=libsnmp-dev

[gos:8.04.1:libpthread]
packages=build-essential

[gos:8.04.1:libtool]
packages=libtool

[gos:8.04.1:libusb]
packages=libusb-1.0-0-dev

[gos:8.04.1:make]
packages=build-essential

[gos:8.04.1:pil]
packages=python-imaging

[gos:8.04.1:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[gos:8.04.1:pyqt]
packages=python-qt3

[gos:8.04.1:python-devel]
packages=python2.5-dev

[gos:8.04.1:pyqt4]
packages=python-qt4

[gos:8.04.1:pyqt4-dbus]
packages=python-qt4-dbus

[gos:8.04.1:python23]
packages=python

[gos:8.04.1:python2X]
packages=python

[gos:8.04.1:reportlab]
packages=python-reportlab

[gos:8.04.1:sane]
packages=libsane

[gos:8.04.1:sane-devel]
packages=libsane-dev

[gos:8.04.1:scanimage]
packages=sane-utils

[gos:8.04.1:xsane]
packages=xsane

[gos:8.04.1:cups-ddk]
packages=cupsddk,cupsddk-drivers

[gos:8.04.1:python-dbus]
packages=python-dbus,python-gobject

[gos:8.04.1:dbus]
packages=libdbus-1-dev

[gos:8.04.1:python-ctypes]
packages=python-ctypes

[gos:8.04.1:cups-image]
packages=libcupsys2-dev,cupsys-bsd

[gos:8.04.1:network]
packages=wget

[gos:8.04.1:avahi-utils]
packages=avahi

[gos:8.04.1:automake]
packages=automake1.11

[gos:8.04.1:epm]
packages=epm

# ****************************************
[boss]
index=34
versions=3.0,5.0
display_name=Boss
alt_names=
display=1
notes=
package_mgrs=dpkg,apt-get,synaptic,update-manager,adept,aptitude
package_mgr_cmd=su -c "apt-get install --force-yes -y $packages_to_install"
pre_depend_cmd=su -c "dpkg --configure -a",su -c "apt-get install -f",su -c "apt-get update",su -c "apt-get install --yes cupsys-bsd"
post_depend_cmd=
hplip_remove_cmd=su -c "apt-get remove --yes hplip hpijs"
su_sudo=su
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP

[boss:3.0]
code_name=tejas
supported=1
scan_supported=1
fax_supported=1
pcard_supported=0
network_supported=1
parallel_supported=0
usb_supported=1
packaged_version=3.9.2
release_date=2008-09-04
notes=Be sure to disable the CD-ROM repositories and also ensure that the main/security repositories are enabled.
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
libusb01=1
native_cups=1

[boss:3.0:cups]
packages=cupsys,cupsys-client

[boss:3.0:cups-devel]
packages=libcupsys2-dev,cupsys-bsd

[boss:3.0:gcc]
packages=gcc,g++

[boss:3.0:gs]
packages=gs-esp

[boss:3.0:libcrypto]
packages=libssl-dev

[boss:3.0:libjpeg]
packages=libjpeg-dev

[boss:3.0:libnetsnmp-devel]
packages=libsnmp9-dev

[boss:3.0:libpthread]
packages=libc6

[boss:3.0:libtool]
packages=libtool

[boss:3.0:libusb]
packages=libusb-dev

[boss:3.0:make]
packages=make

[boss:3.0:pil]
packages=python-imaging

[boss:3.0:ppdev]
packages=
commands=su -c "modprobe ppdev",su -c cp -f /etc/modules /etc/modules.hplip,echo ppdev | su -c tee -a /etc/modules

[boss:3.0:pyqt]
packages=python-qt3

[boss:3.0:python-devel]
packages=python-dev

[boss:3.0:pyqt4]
packages=python-qt4

[boss:3.0:pyqt4-dbus]
packages=python-qt4-dbus

[boss:3.0:python23]
packages=python

[boss:3.0:python2X]
packages=python

[boss:3.0:reportlab]
packages=python-reportlab

[boss:3.0:sane]
packages=sane

[boss:3.0:sane-devel]
packages=libsane-dev

[boss:3.0:scanimage]
packages=sane-utils

[boss:3.0:xsane]
packages=xsane

[boss:3.0:cups-ddk]
packages=

[boss:3.0:python-dbus]
packages=python-dbus,libdbus-1-dev,python-gobject

[boss:3.0:dbus]
packages=libdbus-1-dev

[boss:3.0:python-ctypes]
packages=python-ctypes

[boss:3.0:cups-image]
packages=libcupsimage2-dev

[boss:3.0:network]
packages=wget

[boss:3.0:avahi-utils]
packages=avahi-utils

[boss:3.0:automake]
packages=automake1.11

[boss:3.0:epm]
packages=epm


[boss:5.0]
code_name=anokha
supported=1
scan_supported=1
fax_supported=1
pcard_supported=0
network_supported=1
parallel_supported=0
usb_supported=1
packaged_version=3.13.4
release_date=2013-08-08
notes=Be sure to disable the CD-ROM repositories and also ensure that the main/security repositories are enabled.
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
libusb01=0
native_cups=1

[boss:5.0:cups]
packages=libcups2

[boss:5.0:cups-devel]
packages=libcups2-dev

[boss:5.0:gcc]
packages=gcc,g++

[boss:5.0:gs]
packages=ghostscript

[boss:5.0:libcrypto]
packages=libssl-dev

[boss:5.0:libjpeg]
packages=libjpeg-dev

[boss:5.0:libnetsnmp-devel]
packages=libsnmp-dev

[boss:5.0:libpthread]
packages=libc6

[boss:5.0:libtool]
packages=libtool

[boss:5.0:libusb]
packages=libusb-1.0-0-dev, libusb-1.0-0

[boss:5.0:make]
packages=make

[boss:5.0:pil]
packages=python-imaging

[boss:5.0:python-devel]
packages=python-dev

[boss:5.0:pyqt4]
packages=python-qt4

[boss:5.0:pyqt4-dbus]
packages=python-qt4-dbus

[boss:5.0:python23]
packages=python

[boss:5.0:python2x]
packages=python

[boss:5.0:reportlab]
packages=python-reportlab

[boss:5.0:sane]
packages=sane

[boss:5.0:sane-devel]
packages=libsane-dev

[boss:5.0:scanimage]
packages=sane-utils

[boss:5.0:xsane]
packages=xsane

[boss:5.0:cups-ddk]
packages=

[boss:5.0:python-dbus]
packages=python-dbus,libdbus-1-dev,python-gobject

[boss:5.0:dbus]
packages=libdbus-1-dev

[boss:5.0:python-ctypes]
packages=python-ctypeslib

[boss:5.0:cups-image]
packages=libcupsimage2-dev

[boss:5.0:network]
packages=wget

[boss:5.0:avahi-utils]
packages=avahi-utils

[boss:5.0:automake]
packages=automake1.11

[boss:5.0:epm]
packages=epm

# ****************************************
[lfs]
index=50
versions=6
display_name=Linux From Scratch
alt_names=
display=1
notes=
package_mgrs=
package_mgr_cmd=$packages_to_install
pre_depend_cmd=
post_depend_cmd=
hplip_remove_cmd=
su_sudo=su
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP

[lfs:6]
code_name=LFS
supported=0
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=0
usb_supported=1
packaged_version=
release_date=
notes=
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt4
foomatic_rip_hplip=1

[lfs:6:cups]
packages=cupsys,cupsys-client

[lfs:6:cups-devel]
packages=libcupsys2-dev,cupsys-bsd

[lfs:6:gcc]
packages=gcc,g++

[lfs:6:gs]
packages=gs-esp

[lfs:6:libcrypto]
packages=libssl-dev

[lfs:6:libjpeg]
packages=libjpeg-dev

[lfs:6:libnetsnmp-devel]
packages=libsnmp9-dev

[lfs:6:libpthread]
packages=libc6

[lfs:6:libtool]
packages=libtool

[lfs:6:libusb]
packages=libusb-1.0-0-dev

[lfs:6:make]
packages=make

[lfs:6:pil]
packages=python-imaging

[lfs:6:ppdev]
packages=
commands=su -c "modprobe ppdev",su -c cp -f /etc/modules /etc/modules.hplip,echo ppdev | su -c tee -a /etc/modules

[lfs:6:pyqt]
packages=python-qt3

[lfs:6:python-devel]
packages=python-dev

[lfs:6:pyqt4]
packages=python-qt4

[lfs:6:pyqt4-dbus]
packages=python-qt4-dbus

[lfs:6:python23]
packages=python

[lfs:6:python2X]
packages=python

[lfs:6:reportlab]
packages=python-reportlab

[lfs:6:sane]
packages=sane

[lfs:6:sane-devel]
packages=libsane-dev

[lfs:6:scanimage]
packages=sane-utils

[lfs:6:xsane]
packages=xsane

[lfs:6:cups-ddk]
packages=cupsddk,cupsddk-drivers

[lfs:6:python-dbus]
packages=python-dbus,libdbus-1-dev,python-gobject

[lfs:6:dbus]
packages=libdbus-1-dev

[lfs:6:python-ctypes]
packages=python-ctypes

[lfs:6:cups-image]
packages=libcupsimage2-dev

[lfs:6:policykit]
packages=policykit

[lfs:6:python-notify]
packages=python-notify

[lfs:6:network]
packages=wget

[lfs:6:avahi-utils]
packages=avahi

[lfs:6:automake]
packages=automake1.11

[lfs:6:epm]
packages=epm

# ****************************************

[manjarolinux]
index=26
versions=17.1.4,18.0,18.0.4,18.1.0,18.1.2
display_name=Manjaro Linux
alt_names=ManjaroLinux,manjaro
display=1
notes=
package_mgrs=pacman,yaourt
#package_mgr_cmd=sudo pacman -S --force --noconfirm $packages_to_install
pre_depend_cmd=sudo pacman -Sy
post_depend_cmd=
#scanjet_depend_cmd=sudo pacman -Sy --force --noconfirm python2-pip,sudo pacman -Sy --force --noconfirm tesseract,sudo pacman -Sy --force --noconfirm leptonica,sudo pip2 install tesserocr,sudo pacman -Sy --force --noconfirm tesseract-data-eng,sudo pip2 install opencv-python,sudo pip2 install PyPDF2,sudo pip2 install imutils,sudo pacman -Sy --force --noconfirm zbar,sudo pip2 install pypdfocr,sudo pip2 install scikit-image,sudo pip2 install scipy
#scanjet_py3_depend_cmd=sudo pacman -Sy --force --noconfirm llvm,sudo pacman -Sy --force --noconfirm llvm-libs,sudo pacman -Sy --force --noconfirm python-pip,sudo easy_install pip==18.0,sudo pip install Pillow,sudo pacman -Sy --force --noconfirm tesseract,sudo pacman -Sy --force --noconfirm leptonica,sudo pip3 install tesserocr,sudo pacman -Sy --force --noconfirm tesseract-data-eng,sudo pip3 install opencv-python,sudo pip3 install PyPDF2,sudo pip3 install imutils,sudo pip3 install ocrmypdf,sudo pip3 install scikit-image,sudo pip3 install scipy
hplip_remove_cmd=sudo pacman -Rs --noconfirm hplip
su_sudo=
ppd_install=ppd
udev_mode_fix=1
ppd_dir=/usr/share/cups/model/manufacturer-PPDs/hp
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP


# ****************************************

[manjarolinux:17.1.4]
code_name=Hakoila
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.18.2
release_date=07/03/2017
notes=Enable the universe/multiverse repositories. Also be sure you are using the Manjaro "Main" Repositories. See: https://wiki.manjaro.org/index.php/Arch_User_Repository for more information.  Disable the CD-ROM/DVD source if you do not have the Manjaro installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt5
native_cups=1
acl_rules=1
package_mgr_cmd=sudo pacman -S --force --noconfirm $packages_to_install
#scanjet_depend_cmd=sudo pacman -Sy --force --noconfirm python2-pip,sudo pacman -Sy --force --noconfirm tesseract,sudo pacman -Sy --force --noconfirm leptonica,sudo pip2 install tesserocr,sudo pacman -Sy --force --noconfirm tesseract-data-*,sudo pip2 install opencv-python,sudo pip2 install PyPDF2,sudo pip2 install imutils,sudo pip2 install pypdfocr,sudo pip2 install scikit-image,sudo pip2 install scipy
#scanjet_py3_depend_cmd=sudo pacman -Sy --force --noconfirm python3-pip,sudo pacman -Sy --force --noconfirm tesseract,sudo pacman -Sy --force --noconfirm leptonica,sudo pip3 install tesserocr,sudo pacman -Sy --force --noconfirm tesseract-data-*,sudo pip3 install opencv-python,sudo pip3 install PyPDF2,sudo pip3 install imutils,sudo pip3 install ocrmypdf,sudo pip3 install scikit-image,sudo pip3 install scipy
scanjet_depend_cmd=sudo pacman -Sy --force --noconfirm python2-pip,sudo pacman -Sy --force --noconfirm tesseract,sudo pacman -Sy --force --noconfirm leptonica,sudo pip2 install tesserocr,sudo pacman -Sy --force --noconfirm tesseract-data-eng,sudo pip2 install opencv-python,sudo pip2 install PyPDF2,sudo pip2 install imutils,sudo pacman -Sy --force --noconfirm zbar,sudo pip2 install pypdfocr,sudo pip2 install scikit-image,sudo pip2 install scipy
scanjet_py3_depend_cmd=sudo pacman -Sy --force --noconfirm llvm,sudo pacman -Sy --force --noconfirm llvm-libs,sudo pacman -Sy --force --noconfirm python-pip,sudo easy_install pip==18.0,sudo pip install Pillow,sudo pacman -Sy --force --noconfirm tesseract,sudo pacman -Sy --force --noconfirm leptonica,sudo pip3 install tesserocr,sudo pacman -Sy --force --noconfirm tesseract-data-eng,sudo pip3 install opencv-python,sudo pip3 install PyPDF2,sudo pip3 install imutils,sudo pip3 install ocrmypdf,sudo pip3 install scikit-image,sudo pip3 install scipy

libdir_path=/usr/lib
[manjarolinux:17.1.4:cups]
packages=libcups2

[manjarolinux:17.1.4:libjpeg]
packages=libjpeg-turbo

[manjarolinux:17.1.4:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[manjarolinux:17.1.4:gcc]
packages=libusb-compat
commands=/bin/bash -c "yes | sudo pacman -Sy gcc-multilib gcc-libs-multilib lib32-gcc-libs",/bin/bash -c "yes | sudo pacman -S --needed gcc"

[manjarolinux:17.1.4:gs]
packages=libidn,ghostscript

[manjarolinux:17.1.4:gtk-engine-murrine]
packages=gtk-engine-murrine

[manjarolinux:17.1.4:libcrypto]
packages=openssl,libssl-dev

[manjarolinux:17.1.4:libnetsnmp-devel]
packages=libsnmp-dev,snmp-mibs-downloader

[manjarolinux:17.1.4:libpthread]
packages=libpthread-stubs

[manjarolinux:17.1.4:libtool]
packages=libtool,libtool-bin

[manjarolinux:17.1.4:libusb]
packages=libusb-1.0.0-dev

[manjarolinux:17.1.4:make]
packages=make

[manjarolinux:17.1.4:pil]
packages=python2-imaging

[manjarolinux:17.1.4:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[manjarolinux:17.1.4:pyqt]
packages=pyqt

[manjarolinux:17.1.4:python2-devel]
packages=
commands=sudo pacman -S --noconfirm pygtk

[manjarolinux:17.1.4:pyqt4]
packages=python2-pyqt,pygtk

[manjarolinux:17.1.4:pyqt4-dbus]
packages=dbus-python

[manjarolinux:17.1.4:pyqt5]
packages=python2-pyqt5

[manjarolinux:17.1.4:pyqt5-dbus]
packages=

[manjarolinux:17.1.4:python23]
packages=python2

[manjarolinux:17.1.4:python2X]
packages=python2

[manjarolinux:17.1.4:reportlab]
packages=python2-reportlab

[manjarolinux:17.1.4:sane]
packages=sane

[manjarolinux:17.1.4:sane-devel]
packages=

[manjarolinux:17.1.4:scanimage]
packages=

[manjarolinux:17.1.4:xsane]
packages=xsane

[manjarolinux:17.1.4:python-dbus]
packages=dbus-python,python2-dbus

[manjarolinux:17.1.4:dbus]
packages=libdbus-1-dev

[manjarolinux:17.1.4:cups-image]
packages=libcupsimage2-dev

[manjarolinux:17.1.4:cups-ddk]
packages=cups

[manjarolinux:17.1.4:policykit]
packages=policykit-1,policykit-1-gnome

[manjarolinux:17.1.4:python2-notify]
packages=
commands=sudo pacman -S --noconfirm python2-notify

[manjarolinux:17.1.4:python-notify]
packages=python2-notify

[manjarolinux:17.1.4:network]
packages=wget

[manjarolinux:17.1.4:avahi-utils]
packages=avahi-utils

[manjarolinux:17.1.4:python3-pyqt4-dbus]
packages=

[manjarolinux:17.1.4:python3-pyqt4]
packages=python-pyqt4,pygtk

[manjarolinux:17.1.4:python3-pyqt5-dbus]
packages=python-dbus.mainloop.pyqt5

[manjarolinux:17.1.4:python3-pyqt5]
packages=python-pyqt5

[manjarolinux:17.1.4:python3-dbus]
packages=python-dbus,python-gi

[manjarolinux:17.1.4:python3-xml]
packages=python-lxml

[manjarolinux:17.1.4:python3-devel]
packages=

[manjarolinux:17.1.4:python3-pil]
packages=python2-pillow

[manjarolinux:17.1.4:python3-reportlab]
packages=python-reportlab

[manjarolinux:17.1.4:python3-notify2]
packages=python2-notify

[manjarolinux:17.1.4:autoconf]
packages=autoconf

[manjarolinux:17.1.4:epm]
packages=

[manjarolinux:17.1.4:automake]
packages=automake


# ****************************************

[manjarolinux:18.0]
code_name=Illyria
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.19.1
release_date=24/01/2019
notes=Enable the universe/multiverse repositories. Also be sure you are using the Manjaro "Main" Repositories. See: https://wiki.manjaro.org/index.php/Arch_User_Repository for more information.  Disable the CD-ROM/DVD source if you do not have the Manjaro installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt5
native_cups=1
acl_rules=1
package_mgr_cmd=sudo pacman -S --noconfirm $packages_to_install
#scanjet_depend_cmd=sudo pacman -Sy --noconfirm python2-pip,sudo pacman -Sy --noconfirm tesseract,sudo pacman -Sy --noconfirm leptonica,sudo pip2 install tesserocr,sudo pacman -Sy --noconfirm tesseract-data-*,sudo pip2 install opencv-python,sudo pip2 install PyPDF2,sudo pip2 install imutils,sudo pip2 install pypdfocr,sudo pip2 install scikit-image,sudo pip2 install scipy
#scanjet_py3_depend_cmd=sudo pacman -Sy --noconfirm python3-pip,sudo pacman -Sy --noconfirm tesseract,sudo pacman -Sy --noconfirm leptonica,sudo pip3 install tesserocr,sudo pacman -Sy --noconfirm tesseract-data-*,sudo pip3 install opencv-python,sudo pip3 install PyPDF2,sudo pip3 install imutils,sudo pip3 install ocrmypdf,sudo pip3 install scikit-image,sudo pip3 install scipy
scanjet_depend_cmd=sudo pacman -Sy --noconfirm python2-pip,sudo pacman -Sy --noconfirm tesseract,sudo pacman -Sy --noconfirm leptonica,sudo pip2 install tesserocr,sudo pacman -Sy --noconfirm tesseract-data-eng,sudo pip2 install opencv-python,sudo pip2 install PyPDF2,sudo pip2 install imutils,sudo pacman -Sy --noconfirm zbar,sudo pip2 install pypdfocr,sudo pip2 install scikit-image,sudo pip2 install scipy
scanjet_py3_depend_cmd=sudo pacman -Sy --noconfirm llvm,sudo pacman -Sy --noconfirm llvm-libs,sudo pacman -Sy --noconfirm python-pip,sudo easy_install pip==18.0,sudo pip install Pillow,sudo pacman -Sy --noconfirm tesseract,sudo pacman -Sy --noconfirm leptonica,sudo pip3 install tesserocr,sudo pacman -Sy --noconfirm tesseract-data-eng,sudo pip3 install opencv-python,sudo pip3 install PyPDF2,sudo pip3 install imutils,sudo pip3 install ocrmypdf,sudo pip3 install scikit-image,sudo pip3 install scipy

libdir_path=/usr/lib
[manjarolinux:18.0:cups]
packages=libcups2

[manjarolinux:18.0:libjpeg]
packages=libjpeg-turbo

[manjarolinux:18.0:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[manjarolinux:18.0:gcc]
packages=libusb-compat
commands=/bin/bash -c "yes | sudo pacman -Sy gcc-multilib gcc-libs-multilib lib32-gcc-libs lib32-glibc",/bin/bash -c "yes | sudo pacman -S --needed gcc"

[manjarolinux:18.0:gs]
packages=libidn,ghostscript

[manjarolinux:18.0:gtk-engine-murrine]
packages=gtk-engine-murrine

[manjarolinux:18.0:libcrypto]
packages=openssl,libssl-dev

[manjarolinux:18.0:libnetsnmp-devel]
packages=libsnmp-dev,snmp-mibs-downloader

[manjarolinux:18.0:libpthread]
packages=libpthread-stubs

[manjarolinux:18.0:libtool]
packages=libtool,libtool-bin

[manjarolinux:18.0:libusb]
packages=libusb-1.0.0-dev

[manjarolinux:18.0:make]
packages=make

[manjarolinux:18.0:pil]
packages=python2-imaging

[manjarolinux:18.0:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[manjarolinux:18.0:pyqt]
packages=pyqt

[manjarolinux:18.0:python2-devel]
packages=
commands=sudo pacman -S --noconfirm pygtk

[manjarolinux:18.0:pyqt4]
packages=python2-pyqt,pygtk

[manjarolinux:18.0:pyqt4-dbus]
packages=dbus-python

[manjarolinux:18.0:pyqt5]
packages=python2-pyqt5

[manjarolinux:18.0:pyqt5-dbus]
packages=

[manjarolinux:18.0:python23]
packages=python2

[manjarolinux:18.0:python2X]
packages=python2

[manjarolinux:18.0:reportlab]
packages=python2-reportlab

[manjarolinux:18.0:sane]
packages=sane

[manjarolinux:18.0:sane-devel]
packages=

[manjarolinux:18.0:scanimage]
packages=

[manjarolinux:18.0:xsane]
packages=xsane

[manjarolinux:18.0:python-dbus]
packages=dbus-python,python2-dbus

[manjarolinux:18.0:dbus]
packages=libdbus-1-dev

[manjarolinux:18.0:cups-image]
packages=libcupsimage2-dev

[manjarolinux:18.0:cups-ddk]
packages=cups

[manjarolinux:18.0:policykit]
packages=policykit-1,policykit-1-gnome

[manjarolinux:18.0:python2-notify]
packages=
commands=sudo pacman -S --noconfirm python2-notify

[manjarolinux:18.0:python-notify]
packages=python2-notify

[manjarolinux:18.0:network]
packages=wget

[manjarolinux:18.0:avahi-utils]
packages=avahi-utils

[manjarolinux:18.0:python3-pyqt4-dbus]
packages=

[manjarolinux:18.0:python3-pyqt4]
packages=python-pyqt4,pygtk

[manjarolinux:18.0:python3-pyqt5-dbus]
packages=python-dbus.mainloop.pyqt5

[manjarolinux:18.0:python3-pyqt5]
packages=python-pyqt5

[manjarolinux:18.0:python3-dbus]
packages=python-dbus,python-gi

[manjarolinux:18.0:python3-xml]
packages=python-lxml

[manjarolinux:18.0:python3-devel]
packages=

[manjarolinux:18.0:python3-pil]
packages=python2-pillow

[manjarolinux:18.0:python3-reportlab]
packages=python-reportlab

[manjarolinux:18.0:python3-notify2]
packages=python2-notify

[manjarolinux:18.0:autoconf]
packages=autoconf

[manjarolinux:18.0:epm]
packages=

[manjarolinux:18.0:automake]
packages=automake

# ****************************************

[manjarolinux:18.0.4]
code_name=Illyria
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.19.1
release_date=24/01/2019
notes=Enable the universe/multiverse repositories. Also be sure you are using the Manjaro "Main" Repositories. See: https://wiki.manjaro.org/index.php/Arch_User_Repository for more information.  Disable the CD-ROM/DVD source if you do not have the Manjaro installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt5
native_cups=1
acl_rules=1
package_mgr_cmd=sudo pacman -S --noconfirm $packages_to_install
#scanjet_depend_cmd=sudo pacman -Sy --noconfirm python2-pip,sudo pacman -Sy --noconfirm tesseract,sudo pacman -Sy --noconfirm leptonica,sudo pip2 install tesserocr,sudo pacman -Sy --noconfirm tesseract-data-*,sudo pip2 install opencv-python,sudo pip2 install PyPDF2,sudo pip2 install imutils,sudo pip2 install pypdfocr,sudo pip2 install scikit-image,sudo pip2 install scipy
#scanjet_py3_depend_cmd=sudo pacman -Sy --noconfirm python3-pip,sudo pacman -Sy --noconfirm tesseract,sudo pacman -Sy --noconfirm leptonica,sudo pip3 install tesserocr,sudo pacman -Sy --noconfirm tesseract-data-*,sudo pip3 install opencv-python,sudo pip3 install PyPDF2,sudo pip3 install imutils,sudo pip3 install ocrmypdf,sudo pip3 install scikit-image,sudo pip3 install scipy
scanjet_depend_cmd=sudo pacman -Sy --noconfirm python2-pip,sudo pacman -Sy --noconfirm tesseract,sudo pacman -Sy --noconfirm leptonica,sudo pip2 install tesserocr,sudo pacman -Sy --noconfirm tesseract-data-eng,sudo pip2 install opencv-python,sudo pip2 install PyPDF2,sudo pip2 install imutils,sudo pacman -Sy --noconfirm zbar,sudo pip2 install pypdfocr,sudo pip2 install scikit-image,sudo pip2 install scipy
scanjet_py3_depend_cmd=sudo pacman -Sy --noconfirm llvm,sudo pacman -Sy --noconfirm llvm-libs,sudo pacman -Sy --noconfirm python-pip,sudo easy_install pip==18.0,sudo pip install Pillow,sudo pacman -Sy --noconfirm tesseract,sudo pacman -Sy --noconfirm leptonica,sudo pip3 install tesserocr,sudo pacman -Sy --noconfirm tesseract-data-eng,sudo pip3 install opencv-python,sudo pip3 install PyPDF2,sudo pip3 install imutils,sudo pip3 install ocrmypdf,sudo pip3 install scikit-image,sudo pip3 install scipy

libdir_path=/usr/lib
[manjarolinux:18.0.4:cups]
packages=libcups2

[manjarolinux:18.0.4:libjpeg]
packages=libjpeg-turbo

[manjarolinux:18.0.4:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[manjarolinux:18.0.4:gcc]
packages=libusb-compat
commands=/bin/bash -c "yes | sudo pacman -Sy gcc-multilib gcc-libs-multilib lib32-gcc-libs lib32-glibc",/bin/bash -c "yes | sudo pacman -S --needed gcc"

[manjarolinux:18.0.4:gs]
packages=libidn,ghostscript

[manjarolinux:18.0.4:gtk-engine-murrine]
packages=gtk-engine-murrine

[manjarolinux:18.0.4:libcrypto]
packages=openssl,libssl-dev

[manjarolinux:18.0.4:libnetsnmp-devel]
packages=libsnmp-dev,snmp-mibs-downloader

[manjarolinux:18.0.4:libpthread]
packages=libpthread-stubs

[manjarolinux:18.0.4:libtool]
packages=libtool,libtool-bin

[manjarolinux:18.0.4:libusb]
packages=libusb-1.0.0-dev

[manjarolinux:18.0.4:make]
packages=make

[manjarolinux:18.0.4:pil]
packages=python2-imaging

[manjarolinux:18.0.4:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[manjarolinux:18.0.4:pyqt]
packages=pyqt

[manjarolinux:18.0.4:python2-devel]
packages=
commands=sudo pacman -S --noconfirm pygtk

[manjarolinux:18.0.4:pyqt4]
packages=python2-pyqt,pygtk

[manjarolinux:18.0.4:pyqt4-dbus]
packages=dbus-python

[manjarolinux:18.0.4:pyqt5]
packages=python2-pyqt5

[manjarolinux:18.0.4:pyqt5-dbus]
packages=

[manjarolinux:18.0.4:python23]
packages=python2

[manjarolinux:18.0.4:python2X]
packages=python2

[manjarolinux:18.0.4:reportlab]
packages=python2-reportlab

[manjarolinux:18.0.4:sane]
packages=sane

[manjarolinux:18.0.4:sane-devel]
packages=

[manjarolinux:18.0.4:scanimage]
packages=

[manjarolinux:18.0.4:xsane]
packages=xsane

[manjarolinux:18.0.4:python-dbus]
packages=dbus-python,python2-dbus

[manjarolinux:18.0.4:dbus]
packages=libdbus-1-dev

[manjarolinux:18.0.4:cups-image]
packages=libcupsimage2-dev

[manjarolinux:18.0.4:cups-ddk]
packages=cups

[manjarolinux:18.0.4:policykit]
packages=policykit-1,policykit-1-gnome

[manjarolinux:18.0.4:python2-notify]
packages=
commands=sudo pacman -S --noconfirm python2-notify

[manjarolinux:18.0.4:python-notify]
packages=python2-notify

[manjarolinux:18.0.4:network]
packages=wget

[manjarolinux:18.0.4:avahi-utils]
packages=avahi-utils

[manjarolinux:18.0.4:python3-pyqt4-dbus]
packages=

[manjarolinux:18.0.4:python3-pyqt4]
packages=python-pyqt4,pygtk

[manjarolinux:18.0.4:python3-pyqt5-dbus]
packages=python-dbus.mainloop.pyqt5

[manjarolinux:18.0.4:python3-pyqt5]
packages=python-pyqt5

[manjarolinux:18.0.4:python3-dbus]
packages=python-dbus,python-gi

[manjarolinux:18.0.4:python3-xml]
packages=python-lxml

[manjarolinux:18.0.4:python3-devel]
packages=

[manjarolinux:18.0.4:python3-pil]
packages=python2-pillow

[manjarolinux:18.0.4:python3-reportlab]
packages=python-reportlab

[manjarolinux:18.0.4:python3-notify2]
packages=python2-notify

[manjarolinux:18.0.4:autoconf]
packages=autoconf

[manjarolinux:18.0.4:epm]
packages=

[manjarolinux:18.0.4:automake]
packages=automake

# ****************************************

[manjarolinux:18.1.0]
code_name=Jhuraya
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.19.10
release_date=12/09/2019
notes=Enable the universe/multiverse repositories. Also be sure you are using the Manjaro "Main" Repositories. See: https://wiki.manjaro.org/index.php/Arch_User_Repository for more information.  Disable the CD-ROM/DVD source if you do not have the Manjaro installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt5
native_cups=1
acl_rules=1
package_mgr_cmd=sudo pacman -S --noconfirm $packages_to_install
#scanjet_depend_cmd=sudo pacman -Sy --noconfirm python2-pip,sudo pacman -Sy --noconfirm tesseract,sudo pacman -Sy --noconfirm leptonica,sudo pip2 install tesserocr,sudo pacman -Sy --noconfirm tesseract-data-*,sudo pip2 install opencv-python,sudo pip2 install PyPDF2,sudo pip2 install imutils,sudo pip2 install pypdfocr,sudo pip2 install scikit-image,sudo pip2 install scipy
#scanjet_py3_depend_cmd=sudo pacman -Sy --noconfirm python3-pip,sudo pacman -Sy --noconfirm tesseract,sudo pacman -Sy --noconfirm leptonica,sudo pip3 install tesserocr,sudo pacman -Sy --noconfirm tesseract-data-*,sudo pip3 install opencv-python,sudo pip3 install PyPDF2,sudo pip3 install imutils,sudo pip3 install ocrmypdf,sudo pip3 install scikit-image,sudo pip3 install scipy
scanjet_depend_cmd=sudo pacman -Sy --noconfirm python2-pip,sudo pacman -Sy --noconfirm tesseract,sudo pacman -Sy --noconfirm leptonica,sudo pip2 install tesserocr,sudo pacman -Sy --noconfirm tesseract-data-eng,sudo pip2 install opencv-python,sudo pip2 install PyPDF2,sudo pip2 install imutils,sudo pacman -Sy --noconfirm zbar,sudo pip2 install pypdfocr,sudo pip2 install scikit-image,sudo pip2 install scipy
scanjet_py3_depend_cmd=sudo pacman -Sy --noconfirm llvm,sudo pacman -Sy --noconfirm llvm-libs,sudo pacman -Sy --noconfirm python-pip,sudo easy_install pip==18.0,sudo pip install Pillow,sudo pacman -Sy --noconfirm tesseract,sudo pacman -Sy --noconfirm leptonica,sudo pip3 install tesserocr,sudo pacman -Sy --noconfirm tesseract-data-eng,sudo pip3 install opencv-python,sudo pip3 install PyPDF2,sudo pip3 install imutils,sudo pip3 install ocrmypdf,sudo pip3 install scikit-image,sudo pip3 install scipy

libdir_path=/usr/lib
[manjarolinux:18.1.0:cups]
packages=libcups2

[manjarolinux:18.1.0:libjpeg]
packages=libjpeg-turbo

[manjarolinux:18.1.0:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[manjarolinux:18.1.0:gcc]
packages=libusb-compat
commands=/bin/bash -c "yes | sudo pacman -Sy gcc-multilib gcc-libs-multilib lib32-gcc-libs lib32-glibc",/bin/bash -c "yes | sudo pacman -S --needed gcc"

[manjarolinux:18.1.0:gs]
packages=libidn,ghostscript

[manjarolinux:18.1.0:gtk-engine-murrine]
packages=gtk-engine-murrine

[manjarolinux:18.1.0:libcrypto]
packages=openssl,libssl-dev

[manjarolinux:18.1.0:libnetsnmp-devel]
packages=libsnmp-dev,snmp-mibs-downloader

[manjarolinux:18.1.0:libpthread]
packages=libpthread-stubs

[manjarolinux:18.1.0:libtool]
packages=libtool,libtool-bin

[manjarolinux:18.1.0:libusb]
packages=libusb-1.0.0-dev

[manjarolinux:18.1.0:make]
packages=make

[manjarolinux:18.1.0:pil]
packages=python2-imaging

[manjarolinux:18.1.0:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[manjarolinux:18.1.0:pyqt]
packages=pyqt

[manjarolinux:18.1.0:python2-devel]
packages=
commands=sudo pacman -S --noconfirm pygtk

[manjarolinux:18.1.0:pyqt4]
packages=python2-pyqt,pygtk

[manjarolinux:18.1.0:pyqt4-dbus]
packages=dbus-python

[manjarolinux:18.1.0:pyqt5]
packages=python2-pyqt5

[manjarolinux:18.1.0:pyqt5-dbus]
packages=

[manjarolinux:18.1.0:python23]
packages=python2

[manjarolinux:18.1.0:python2X]
packages=python2

[manjarolinux:18.1.0:reportlab]
packages=python2-reportlab

[manjarolinux:18.1.0:sane]
packages=sane

[manjarolinux:18.1.0:sane-devel]
packages=

[manjarolinux:18.1.0:scanimage]
packages=

[manjarolinux:18.1.0:xsane]
packages=xsane

[manjarolinux:18.1.0:python-dbus]
packages=dbus-python,python2-dbus

[manjarolinux:18.1.0:dbus]
packages=libdbus-1-dev

[manjarolinux:18.1.0:cups-image]
packages=libcupsimage2-dev

[manjarolinux:18.1.0:cups-ddk]
packages=cups

[manjarolinux:18.1.0:policykit]
packages=policykit-1,policykit-1-gnome

[manjarolinux:18.1.0:python2-notify]
packages=
commands=sudo pacman -S --noconfirm python2-notify

[manjarolinux:18.1.0:python-notify]
packages=python2-notify

[manjarolinux:18.1.0:network]
packages=wget

[manjarolinux:18.1.0:avahi-utils]
packages=avahi-utils

[manjarolinux:18.1.0:python3-pyqt4-dbus]
packages=

[manjarolinux:18.1.0:python3-pyqt4]
packages=python-pyqt4,pygtk

[manjarolinux:18.1.0:python3-pyqt5-dbus]
packages=python-dbus.mainloop.pyqt5

[manjarolinux:18.1.0:python3-pyqt5]
packages=python-pyqt5

[manjarolinux:18.1.0:python3-dbus]
packages=python-dbus,python-gi

[manjarolinux:18.1.0:python3-xml]
packages=python-lxml

[manjarolinux:18.1.0:python3-devel]
packages=

[manjarolinux:18.1.0:python3-pil]
packages=python2-pillow

[manjarolinux:18.1.0:python3-reportlab]
packages=python-reportlab

[manjarolinux:18.1.0:python3-notify2]
packages=python2-notify

[manjarolinux:18.1.0:autoconf]
packages=autoconf

[manjarolinux:18.1.0:epm]
packages=

[manjarolinux:18.1.0:automake]
packages=automake


# ****************************************

[manjarolinux:18.1.2]
code_name=Jhuraya
supported=1
scan_supported=1
fax_supported=1
pcard_supported=1
network_supported=1
parallel_supported=1
usb_supported=1
packaged_version=3.19.10
release_date=12/09/2019
notes=Enable the universe/multiverse repositories. Also be sure you are using the Manjaro "Main" Repositories. See: https://wiki.manjaro.org/index.php/Arch_User_Repository for more information.  Disable the CD-ROM/DVD source if you do not have the Manjaro installation media inserted in the drive.
ppd_install=drv
udev_mode_fix=1
ppd_dir=/usr/share/ppd/HP
fix_ppd_symlink=0
drv_dir=/usr/share/cups/drv/HP
ui_toolkit=qt5
native_cups=1
acl_rules=1
package_mgr_cmd=sudo pacman -S --noconfirm $packages_to_install
#scanjet_depend_cmd=sudo pacman -Sy --noconfirm python2-pip,sudo pacman -Sy --noconfirm tesseract,sudo pacman -Sy --noconfirm leptonica,sudo pip2 install tesserocr,sudo pacman -Sy --noconfirm tesseract-data-*,sudo pip2 install opencv-python,sudo pip2 install PyPDF2,sudo pip2 install imutils,sudo pip2 install pypdfocr,sudo pip2 install scikit-image,sudo pip2 install scipy
#scanjet_py3_depend_cmd=sudo pacman -Sy --noconfirm python3-pip,sudo pacman -Sy --noconfirm tesseract,sudo pacman -Sy --noconfirm leptonica,sudo pip3 install tesserocr,sudo pacman -Sy --noconfirm tesseract-data-*,sudo pip3 install opencv-python,sudo pip3 install PyPDF2,sudo pip3 install imutils,sudo pip3 install ocrmypdf,sudo pip3 install scikit-image,sudo pip3 install scipy
scanjet_depend_cmd=sudo pacman -Sy --noconfirm python2-pip,sudo pacman -Sy --noconfirm tesseract,sudo pacman -Sy --noconfirm leptonica,sudo pip2 install tesserocr,sudo pacman -Sy --noconfirm tesseract-data-eng,sudo pip2 install opencv-python,sudo pip2 install PyPDF2,sudo pip2 install imutils,sudo pacman -Sy --noconfirm zbar,sudo pip2 install pypdfocr,sudo pip2 install scikit-image,sudo pip2 install scipy
scanjet_py3_depend_cmd=sudo pacman -Sy --noconfirm llvm,sudo pacman -Sy --noconfirm llvm-libs,sudo pacman -Sy --noconfirm python-pip,sudo easy_install pip==18.0,sudo pip install Pillow,sudo pacman -Sy --noconfirm tesseract,sudo pacman -Sy --noconfirm leptonica,sudo pip3 install tesserocr,sudo pacman -Sy --noconfirm tesseract-data-eng,sudo pip3 install opencv-python,sudo pip3 install PyPDF2,sudo pip3 install imutils,sudo pip3 install ocrmypdf,sudo pip3 install scikit-image,sudo pip3 install scipy

libdir_path=/usr/lib
[manjarolinux:18.1.2:cups]
packages=libcups2

[manjarolinux:18.1.2:libjpeg]
packages=libjpeg-turbo

[manjarolinux:18.1.2:cups-devel]
packages=libcups2-dev,cups-bsd,cups-client

[manjarolinux:18.1.2:gcc]
packages=libusb-compat
commands=/bin/bash -c "yes | sudo pacman -Sy gcc-multilib gcc-libs-multilib lib32-gcc-libs lib32-glibc",/bin/bash -c "yes | sudo pacman -S --needed gcc"

[manjarolinux:18.1.2:gs]
packages=libidn,ghostscript

[manjarolinux:18.1.2:gtk-engine-murrine]
packages=gtk-engine-murrine

[manjarolinux:18.1.2:libcrypto]
packages=openssl,libssl-dev

[manjarolinux:18.1.2:libnetsnmp-devel]
packages=libsnmp-dev,snmp-mibs-downloader

[manjarolinux:18.1.2:libpthread]
packages=libpthread-stubs

[manjarolinux:18.1.2:libtool]
packages=libtool,libtool-bin

[manjarolinux:18.1.2:libusb]
packages=libusb-1.0.0-dev

[manjarolinux:18.1.2:make]
packages=make

[manjarolinux:18.1.2:pil]
packages=python2-imaging

[manjarolinux:18.1.2:ppdev]
packages=
commands=sudo modprobe ppdev,sudo cp -f /etc/modules /etc/modules.hplip,echo ppdev | sudo tee -a /etc/modules

[manjarolinux:18.1.2:pyqt]
packages=pyqt

[manjarolinux:18.1.2:python2-devel]
packages=
commands=sudo pacman -S --noconfirm pygtk

[manjarolinux:18.1.2:pyqt4]
packages=python2-pyqt,pygtk

[manjarolinux:18.1.2:pyqt4-dbus]
packages=dbus-python

[manjarolinux:18.1.2:pyqt5]
packages=python2-pyqt5

[manjarolinux:18.1.2:pyqt5-dbus]
packages=

[manjarolinux:18.1.2:python23]
packages=python2

[manjarolinux:18.1.2:python2X]
packages=python2

[manjarolinux:18.1.2:reportlab]
packages=python2-reportlab

[manjarolinux:18.1.2:sane]
packages=sane

[manjarolinux:18.1.2:sane-devel]
packages=

[manjarolinux:18.1.2:scanimage]
packages=

[manjarolinux:18.1.2:xsane]
packages=xsane

[manjarolinux:18.1.2:python-dbus]
packages=dbus-python,python2-dbus

[manjarolinux:18.1.2:dbus]
packages=libdbus-1-dev

[manjarolinux:18.1.2:cups-image]
packages=libcupsimage2-dev

[manjarolinux:18.1.2:cups-ddk]
packages=cups

[manjarolinux:18.1.2:policykit]
packages=policykit-1,policykit-1-gnome

[manjarolinux:18.1.2:python2-notify]
packages=
commands=sudo pacman -S --noconfirm python2-notify

[manjarolinux:18.1.2:python-notify]
packages=python2-notify

[manjarolinux:18.1.2:network]
packages=wget

[manjarolinux:18.1.2:avahi-utils]
packages=avahi-utils

[manjarolinux:18.1.2:python3-pyqt4-dbus]
packages=

[manjarolinux:18.1.2:python3-pyqt4]
packages=python-pyqt4,pygtk

[manjarolinux:18.1.2:python3-pyqt5-dbus]
packages=python-dbus.mainloop.pyqt5

[manjarolinux:18.1.2:python3-pyqt5]
packages=python-pyqt5

[manjarolinux:18.1.2:python3-dbus]
packages=python-dbus,python-gi

[manjarolinux:18.1.2:python3-xml]
packages=python-lxml

[manjarolinux:18.1.2:python3-devel]
packages=

[manjarolinux:18.1.2:python3-pil]
packages=python2-pillow

[manjarolinux:18.1.2:python3-reportlab]
packages=python-reportlab

[manjarolinux:18.1.2:python3-notify2]
packages=python2-notify

[manjarolinux:18.1.2:autoconf]
packages=autoconf

[manjarolinux:18.1.2:epm]
packages=

[manjarolinux:18.1.2:automake]
packages=automake

