#!/bin/sh

# Author: Benoit PAPILLAULT <benoit.papillault@free.fr>
# Creation: 12/05/2004

# Goal: Start the connection

# Ensure to have a working PATH
export PATH="/sbin:/bin:/usr/sbin:/usr/bin:/usr/pkg/sbin:/usr/pkg/bin"

# check for root privileges

if [ "`whoami`" != "root" ]; then
  echo "You must launch this script with root privileges. Enter root password."
  exec su -c "$0 $@"
  exit 1
fi

# define the usb devices path for Suse 9.1
DEVICES=/proc/bus/usb/devices
DEVICES_SUSE=/proc/bus/usb/devices_please-use-sysfs-instead

echo "Starting ADSL connection..."

# load usbcore if needed
if [ ! -d /proc/bus/usb ]; then
    echo -n "Loading USB support... "
    modprobe usbcore
    sleep 1
    if [ ! -d /proc/bus/usb ]; then
        echo "KO";
        exit 1;
    else
        echo "OK";
    fi
fi

# mount usbdevfs is this is not the case
if [ ! -f "${DEVICES}" ] && [ ! -f "${DEVICES_SUSE}" ]; then
    echo -n "Loading preliminary USB device filesystem support... "
    mount -t usbdevfs usbdevfs /proc/bus/usb
    sleep 1
	if [ ! -f "${DEVICES}" ] && [ ! -f "${DEVICES_SUSE}" ]; then
        echo "KO";
        exit 1
    else
        echo "OK";
    fi
fi

# use only DEVICES throughout the rest of this script
if [ ! -f "${DEVICES}" ] && [ -f "${DEVICES_SUSE}" ]; then
	echo "Warning: using ${DEVICES_SUSE}"
	DEVICES="${DEVICES_SUSE}"
fi

case `uname -r` in
    2.4.*)
        UHCI=usb-uhci
        UHCI_BIS=uhci
        OHCI=usb-ohci
        ;;
    2.5.*)
        UHCI=uhci-hcd
        UHCI_BIS=
        OHCI=ohci-hcd
        ;;
    2.6.*)
        UHCI=uhci-hcd
        UHCI_BIS=
        OHCI=ohci-hcd
        ;;
esac

# check for UHCI

if ! grep "^S:  Product=" "${DEVICES}" |grep -q UHCI; then
    if lspci -v | grep "USB Controller" | grep -q UHCI; then
        echo -n "Loading UHCI support... "
        modprobe $UHCI
        if [ "${UHCI_BIS}" ]; then modprobe $UHCI_BIS; fi
        sleep 1
        if ! grep "^S:  Product=" "${DEVICES}" |grep -q UHCI; then
            echo "KO";
        else
            echo "OK";
        fi
    fi
fi

# check for OHCI

if ! grep "^S:  Product=" "${DEVICES}" |grep -q OHCI; then
    if lspci -v | grep "USB Controller" | grep -q OHCI; then
        echo -n "Loading OHCI support... "
        modprobe $OHCI
        sleep 1
        if ! grep "^S:  Product=" "${DEVICES}" |grep -q OHCI; then
            echo "KO";
        else
            echo "OK";
        fi
    fi
fi

# we do not check for EHCI since : 
# - it is useless because EHCI only handles USB 2.0 and all of our supported
#   modems are USB 1.1
# - at load time, it disconnects all USB 1.1 devices

# if one configuration file exists, read it. This file should define :
# 
# FIRMWARE_LOADER_FILE
# FIRMWARE_FILE
# PPPD_PEER
#

# At this point, USB is properly configured (/proc/bus/usb/devices can
# be used)

if [ -f /etc/speedtouch/speedtouch.conf ]; then
  . /etc/speedtouch/speedtouch.conf
fi

if [ "$FIRMWARE_LOADER_FILE" ]; then
  MODEM_RUN_OPTIONS="$MODEM_RUN_OPTIONS -a $FIRMWARE_LOADER_FILE"
fi

if [ "$FIRMWARE_FILE" ]; then
    MODEM_RUN_OPTIONS="$MODEM_RUN_OPTIONS -f $FIRMWARE_FILE"
else
    echo "FIRMWARE_FILE undefined"
    exit 1
fi

# convention : when modem_run returns, meaning that the DSL line is
# up, we create the file /var/run/speedtouch-up. This file is removed
# when the modem is removed (in the hotplug script).

# Of course, this does not work when several modems are connected (we
# should write a small executable that get the mac addresse from the
# modem and use it as a key)

if ! "/usr/pkg/sbin/modem_run" $MODEM_RUN_OPTIONS; then
    exit 1
fi

#
# for PPPoA connections :
#
# pppd call speedtouch-pppoa updetach
#
# for PPPoE connections :
#
# pppd call speedtouch-pppoe updetach
#

if [ "${PPPD_PEER}" = "" ]; then
    echo "PPPD_PEER undefined"
    exit 1
fi

case `uname` in
  Linux)
    pppd call "${PPPD_PEER}" updetach
    ;;
  FreeBSD)
    ppp -background "${PPPD_PEER}"
    ;;
esac

