GFS consists of the following subsystems:
Cluster Configuration System (CCS)
Fence
Pool
LOCK_GULM
LOCK_NOLOCK
Table 1-1 summarizes the GFS Software subsystems and their components.
| Software Subsystem | Components | Description | ||
|---|---|---|---|---|
| Cluster Configuration System (CCS) | ccs_tool | Command used to create CCS archives. | ||
| ccs_read | Diagnostic and testing command that is used to retrieve information from configuration files through ccsd. | |||
| ccsd | CCS daemon that runs on all cluster nodes and provides configuration file data to cluster software. | |||
| ccs_servd | CCS server daemon that distributes CCS data from a single server to ccsd daemons when a shared device is not used for storing CCS data. | |||
| Fence | fence_node | Command used by lock_gulmd when a fence operation is required. This command takes the name of a node and fences it based on the node's fencing configuration. | ||
| fence_apc | Fence agent for APC power switch. | |||
| fence_wti | Fence agent for WTI power switch. | |||
| fence_brocade | Fence agent for Brocade Fibre Channel switch. | |||
| fence_mcdata | Fence agent for McData Fibre Channel switch. | |||
| fence_vixel | Fence agent for Vixel Fibre Channel switch. | |||
| fence_rib | Fence agent for RIB card. | |||
| fence_gnbd | Fence agent used with GNBD storage. | |||
| fence_egenera | Fence agent used with Egenera BladeFrame system. | |||
| fence_xcat | Fence agent used with xCAT-managed cluster. | |||
| fence_manual |
| |||
| fence_ack_manual | User interface for fence_manual agent. | |||
| Pool | pool.o | Kernel module implementing the pool block-device driver. | ||
| pool_assemble | Command that activates and deactivates pool volumes. | |||
| pool_tool | Command that configures pool volumes from individual storage devices. | |||
| pool_info | Command that reports information about system pools. | |||
| pool_grow | Command that expands a pool volume. | |||
| pool_mp | Command that manages pool multipathing. | |||
| LOCK_GULM | lock_gulm.o | Kernel module that is installed on GFS nodes using the LOCK_GULM lock module. | ||
| lock_gulmd | Server/daemon that runs on each node and communicates with all nodes in GFS cluster. | |||
| gulm_tool | Command that configures and debugs the lock_gulmd server. | |||
| LOCK_NOLOCK | lock_nolock.o | Kernel module installed on a node using GFS as a local file system. | ||
| GFS | gfs.o | Kernel module that implements the GFS file system and is loaded on GFS cluster nodes. | ||
| lock_harness.o | Kernel module that implements the GFS lock harness into which GFS lock modules can plug. | |||
| gfs_mkfs | Command that creates a GFS file system on a storage device. | |||
| gfs_tool | Command that configures or tunes a GFS file system. This command can also gather a variety of information about the file system. | |||
| gfs_quota | Command that manages quotas on a mounted GFS file system. | |||
| gfs_grow | Command that grows a mounted GFS file system. | |||
| gfs_jadd | Command that adds journals to a mounted GFS file system. | |||
| gfs_fsck | Command that repairs an unmounted GFS file system. | |||
| GNBD | gnbd.o | Kernel module that implements the GNBD device driver on clients. | ||
| gnbd_serv.o | Kernel module that implements the GNBD server. It allows a node to export local storage over the network. | |||
| gnbd_export | Command to create, export and manage GNBDs on a GNBD server. | |||
| gnbd_import | Command to import and manage GNBDs on a GNBD client. | |||
| Upgrade | gfs_conf | Command that retrieves from a cidev configuration information from earlier versions of GFS. |
Table 1-1. GFS Software Subsystem Components